Pasar al contenido principal

Sustainable Development of Cement and Concrete Technology with Low Environmental Impact

RYC2021-032620-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Durability of Magnesium Potassium Phosphate Cements (MKPCs) under Chemical Attack

  • Chhaiba, Salma
  • Martínez-Sánchez, Sergio
  • Husillos Rodríguez, N.
  • Palomo, Ángel
  • Kinoshita, Hajime
  • García-Lodeiro, Inés
Magnesium phosphate cements (MPCs), also known as chemically bonded ceramics, represent a class of inorganic cements that have garnered considerable interest in recent years for their exceptional properties and diverse applications in the construction and engineering sectors. However, the development of these cements is relatively recent (they emerged at the beginning of the 20th century), so there are still certain aspects relating to their durability that need to be evaluated. The present work analyses the chemical durability of magnesium potassium phosphate cements (MKPCs) during 1 year of immersion in three leaching media: seawater, a Na2SO4 solution (4% by mass) and deionized water. For this, pastes of prismatic specimens of MKPC, prepared with different M/P ratio (2 and 3), were submitted to the different chemical attacks. At different ages, the changes on the mechanical strengths, microstructure (BSEM, MIP) and mineralogy (XRD, FTIR, TG/DTG) were evaluated. The results obtained indicate that, in general terms, MKPC systems show good behavior in the three media, with the more resistant system being the one prepared with a M/P molar ratio of 3., The JIN project (PID2020-116738RJ-I0 AEI/10.13039/501100011033) and the RYC excellence contract (RYC2021-032620-I), funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001033) and the European Union “Next generation EU/PRTR”. Institutional Review Board Statement, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acid resistance of alkali-activated binders based on clays from phosphate mining by-products

  • Mabroum, Safaa
  • García-Lodeiro, Inés
  • El Machi, Aiman
  • Chhaiba, Salma
  • Taha, Yassine
  • Benzaazoua, Mostafa
  • Blanco-Varela, María Teresa
  • Hakkou, Rachid
This paper outlines the results of studying the resistance of alkali-activated materials (AAM), based on calcined yellow clay from phosphate mine by-products as a precursor, to an acid attack (with sulfuric and phosphoric acids, 5 %, pH ≈ 0,8–2). Calcined yellow clay (YC850) is used as the source of aluminosilicates, containing montmorillonite, dolomite, and quartz. The alkali-activation of such materials allows the determination of an adequate valorization way and evaluating their durability leads to defining the range of application. The residual compressive strengths were measured after 1, 2, and 4 weeks of immersion in those acids. The deterioration suffered by the paste specimens was examined using different techniques., The degree of deterioration differs from one acid to another; in sulfuric acid, the strengths decrease from 47 MPa to 10.6 MPa presenting 77.4 %. While in phosphoric acid, the decrease was about 36.2 % (30 MPa) after 28 days of attack. This detriment in the strengths is associated with changes not only in the microstructure but also with the alteration of the reaction products, mainly the binding gels C-A-S-H and (C,N)-A-S-H, which undergoes dealumination and decalcification. What is more, the chemical attack involves several reactions; calcium coming from the precursor reacts with the sulfates (in the H2SO4 attack) inducing the precipitation of gypsum, which is responsible for the significant strength loss. In addition, the dissolution of crystalline minerals, such as periclase and gehlenite (present in the precursor) generates higher porosity explaining the obtained results., The authors are acknowledged the concession of the project ICOOP +2020 (ref COOPA20454 funded by the CSIC) and to the Spanish Agency: AGENCIA ESTATAL DE INVESTIGACIÓN (JIN Projects 2021 PID2020-116738RJ-I00/AEI/10.13039/501100011033) and the RYC Excellence Contract (RYC2021-032620-I, MCIN/AEI/10.13039/50110001033). This work was supported by OCP-SA, Morocco, under the specific agreement OCP/UM6P #AS03., Peer reviewed