Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 268
Encontrada(s) 3 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Modeling of Open-Irrigated Electrodes for Radiofrequency Cardiac Ablation Including Blood Motion-Saline Flow Interaction

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
  • Guerra, Jose M.
  • Gerardo-Giorda, Luca
[EN] Radiofrequency catheter ablation (RFCA) is a routine treatment for cardiac arrhythmias. During RFCA, the electrode-tissue interface temperature should be kept below 80°C to avoid thrombus formation. Open-irrigated electrodes facilitate power delivery while keeping low temperatures around the catheter. No computational model of an open-irrigated electrode in endocardial RFCA accounting for both the saline irrigation flow and the blood motion in the cardiac chamber has been proposed yet. We present the first computational model including both effects at once. The model has been validated against existing experimental results. Computational results showed that the surface lesion width and blood temperature are affected by both the electrode design and the irrigation flow rate. Smaller surface lesion widths and blood temperatures are obtained with higher irrigation flow rate, while the lesion depth is not affected by changing the irrigation flow rate. Larger lesions are obtained with increasing power and the electrode-tissue contact. Also, larger lesions are obtained when electrode is placed horizontally. Overall, the computational findings are in close agreement with previous experimental results providing an excellent tool for future catheter research., This work was supported in part by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013-0323, and also by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3-R (TEC2014-52383-C3-1-R) and Grant MTM201569992-R. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This work was supported in part by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013-0323, and also by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3-R (TEC2014-52383-C3-1-R) and Grant MTM2015-69992-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A SIR-based model for contact-based messaging applications supported by permanent infrastructure

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo-Arcila, Marina
[EN] In this paper, we focus on the study of coupled systems of ordinary differential equations (ODEs) describing the diffusion of messages between mobile devices. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. SIR (Sane, Infected, Recovered) models permit to represent the diffusion of messages using an epidemiological based approach. The question we analyse in this work is whether the coexistence of a fixed infrastructure can improve the diffusion of messages and thus justify the additional costs. We analyse this case from the point of view of dynamical systems, finding and characterising the admissible equilibrium of this scenario. We show that a centralised diffusion is not efficient when people density reaches a sufficient value. This result supports the interest in developing opportunistic networks for occasionally crowded places to avoid the cost of additional infrastructure., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R, MTM2016-75963-P & BCAM Severo Ochoa excellence accreditation SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108, ACOMP/2015/005, GVA/2018/110), by the Basque Government through the BERC 2014-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lineability within probability theory settings

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Fenoy, Mar
  • Murillo Arcila, Marina
  • Seoane Sepúlveda, Juan B.
[EN] The search of lineability consists on finding large vector spaces of mathematical objects with special properties. Such examples have arisen in the last years in a wide range of settings such as in real and complex analysis, sequence spaces, linear dynamics, norm-attaining functionals, zeros of polynomials in Banach spaces, Dirichlet series, and non-convergent Fourier series, among others. In this paper we present the novelty of linking this notion of lineability to the area of Probability Theory by providing positive (and negative) results within the framework of martingales, random variables, and certain stochastic processes., This work was partially supported by Ministerio de Educacion, Cultura y Deporte, projects MTM2013-47093-P and MTM2015-65825-P, by the Basque Government through the BERC 2014-2017 program and by the Spanish Ministerio de Economia y Competitividad: BCAM Severo Ochoa excellence accreditation SEV-2013-0323.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Analytical Model Based on Population Processes to Characterize Data Dissemination in 5G Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
[EN] The scarcity of bandwidth due to the explosive growth of mobile devices in 5G makes the offloading messaging workload to Wi-Fi devices that use opportunistic connections, a very promising solution. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we propose an analytical model based on population processes to evaluate data dissemination considering several parameters, such as user density, contact rate, and the number of fixed nodes. From this model, we obtain closed-form expressions for determining the diffusion time, the network coverage, and the waiting time. Newer 5G wireless technologies, such as WiGig, can offer multi-gigabit speeds, low latency, and security-protected connectivity between nearby devices. We therefore focus our work on the impact of high-speed and short-range wireless communications technologies for data dissemination in mobile opportunistic networks. Moreover, we test whether the coexistence with a fixed infrastructure can improve content dissemination, and thus justify its additional cost. Our results show that, when user density is high, the diffusion is mainly performed through the opportunistic contacts between mobile nodes, and that the diffusion coverage is close to 100%. Moreover, the diffusion is fast enough to dynamically update the information among all the participating members, so users do not need to get closer to fixed spots for receiving updated information., This work was supported in part by the Ministerio de Economa y Competitividad, Spain, under Grant TEC2014-52690-R, Grant MTM 2016-75963-P, and Grant SEV-2013-0323, in part by Generalitat Valenciana, Spain, under Grant AICO/2015/108 and Grant ACOMP/2015/005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical evaluation of the performance of contact-based messaging applications

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
Communications in mobile opportunistic networks, instead of using the Internet infrastructure, take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we analytically model the performance of mobile opportunistic networks for contact-based messaging applications in city squares or gathering points, a key challenging topic that is required for the effective design of novel services. We take into account several social aspects such as: the density of people, the dynamic of people arriving and leaving a place, the size of the messages and the duration of the contacts. We base our models on Population Processes, an approach commonly used to represent the dynamics of biological populations. We study their stable equilibrium points and obtain analytical expressions for their resolution. The evaluations performed show that these models can reproduce the dynamics of message diffusion applications. We demonstrate that when the density of people increases, the effectiveness of the diffusion is improved. Regarding the arrival and departure of people, their impact is more relevant when the density of people is low. Finally, we prove that for large message sizes the effectiveness of the epidemic diffusion is reduced, and novel diffusion protocols should be considered. © 2016 Elsevier B.V. All rights reserved., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R & MTM2013-47093-P & SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108 & ACOMP/2015/005) and by the Basque Government through the BERC 2014-2017 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Different Methods of Modeling the Thermal Effect of Circulating Blood Flow During RF Cardiac Ablation

  • González-Suárez, Ana|||0000-0002-1813-4176
  • Berjano, Enrique|||0000-0002-3247-2665
Our aim was to compare the different methods of modeling the effect of circulating blood flow on the thermal lesion dimensions created by radio frequency (RF) cardiac ablation and on the maximum blood temperature. Computational models were built to study the temperature distributions and lesion dimensions created by a nonirrigated electrode by two RF energy delivery protocols (constant voltage and constant temperature) under high and low blood flow conditions. Four methods of modeling the effect of circulating blood flow on lesion dimensions and temperature distribution were compared. Three of them considered convective coeffi- cients at the electrode–blood and tissue–blood interfaces to model blood flow: 1) without including blood as a part of the domain; 2) constant electrical conductivity of blood; and 3) temperaturedependent electrical conductivity of blood (+2%/°C). Method 4) included blood motion and was considered to be a reference method for comparison purposes. Only Method 4 provided a realistic blood temperature distribution. The other three methods predicted lesion depth values similar to those of the reference method (differences smaller than 1 mm), regardless of ablation mode and blood flow conditions. Considering the aspects of lesion size and maximum temperature reached in blood and tissue, Method 2 seems to be the most suitable alternative to Method 4 in order to reduce the computational complexity. Our findings could have an important implication in future studies of RF cardiac ablation, in particular, in choosing the most suitable method to model the thermal effect of circulating blood., This work was supported in part by the Spanish "Plan Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad" under Grant TEC2014-52383-C3 (TEC2014-52383-C3-1-R) and also by the Basque Government through the BERC 2014-2017 program and by Spanish Ministry of Economy and Competitiveness MINECO: BCAM Severo Ochoa excellence accreditation SEV-2013-0323. Asterisk indicates corresponding author.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Complex angular momentum theory of state-to-state integral cross sections: Resonance effects in the

F + HD \to HF(v' = 3) + D
  • Sokolovski, D.
  • Akhmatskaya, E.
  • Echeverria-Arrondo, C.
  • de Fazio, D.
State-to-state reactive integral cross sections (ICSs) are often affected by quantum mechanical resonances, especially near a reactive threshold. An ICS is usually obtained by summing partial waves at a given value of energy. For this reason, the knowledge of pole positions and residues in the complex energy plane is not sufficient for a quantitative description of the patterns produced by resonance. Such description is available in terms of the poles of an S-matrix element in the complex plane of the total angular momentum. The approach was recently implemented in a computer code, available in the public domain [Comput. Phys. Commun., 2014, 185, 2127]. In this paper, we employ the package to analyse in detail, for the first time, the resonance patterns predicted for integral cross sections (ICSs) of the benchmark F + HD → HF(v′ = 3) + D reaction. The v = 0, j = 0, Ω = 0 → v′ = 3, j′ = 0, 1, 2, and Ω′ = 0, 1, 2 transitions are studied for collision energies from 58.54 to 197.54 meV. For these energies, we find several resonances, whose contributions to the ICS vary from symmetric and asymmetric Fano shapes to smooth sinusoidal Regge oscillations. Complex energies of metastable states and Regge pole positions and residues are found by Padé reconstruction of the scattering matrix elements. The accuracy of the code, relation between complex energies and Regge poles, various types of Regge trajectories, and the origin of the J-shifting approximation are also discussed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The airfoil equation on near disjoint intervals: Approximate models and polynomial solutions

  • Farina, L.
  • Ferreira, M.R.S.
  • Peron, V.
The airfoil equation is considered over two disjoint intervals. Assuming the distance between the intervals is small an approximate solution is found and relationships between this approximation and the solution of the classical airfoil equation are obtained. Numerical results show the convergence of the solution of the original problem to the approximation. Polynomial solutions for an approximate model are obtained and a spectral method for the generalized airfoil equation on near disjoint intervals is proposed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An Isoperimetric-Type Inequality for Electrostatic Shell Interactions for Dirac Operators

  • Arrizabalaga, N.
  • Mas, A.
  • Vega, L.
In this article we investigate spectral properties of the coupling $H + V_{\lambda}$, where $H =-i\alpha \cdot \nabla + m\beta$ is the free Dirac operator in $\mathbb{R}^3$, $m>0$ and $V_{\lambda}$ is an electrostatic shell potential (which depends on a parameter $\lambda \in \mathbb{R}$) located on the boundary of a smooth domain in $\mathbb{R}^3$. Our main result is an isoperimetric-type inequality for the admissible range of $\lambda$'s for which the coupling $H + V_{\lambda}$ generates pure point spectrum in $(-m,m)$. That the ball is the unique optimizer of this inequality is also shown. Regarding some ingredients of the proof, we make use of the Birman-Schwinger principle adapted to our setting in order to prove some monotonicity property of the admissible $\lambda$'s, and we use this to relate the endpoints of the admissible range of $\lambda$'s to the sharp constant of a quadratic form inequality, from which the isoperimetric-type inequality is derived.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spectral asymptotics of the Dirichlet Laplacian in a conical layer

  • Dauge, M.
  • Ourmières-Bonafos, T.
  • Raymond, N.
The spectrum of the Dirichlet Laplacian on conical layers is analysed through two aspects: the infiniteness of the discrete eigenvalues and their expansions in the small aperture limit. On the one hand, we prove that, for any aperture, the eigenvalues accumulate below the threshold of the essential spectrum: For a small distance from the essential spectrum, the number of eigenvalues farther from the threshold than this distance behaves like the logarithm of the distance. On the other hand, in the small aperture regime, we provide a two-term asymptotics of the first eigenvalues thanks to a priori localization estimates for the associated eigenfunctions. We prove that these eigenfunctions are localized in the conical cap at a scale of order the cubic root of the aperture angle and that they get into the other part of the layer at a scale involving the logarithm of the aperture angle.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards a parameter-free method for high Reynolds number turbulent flow simulation based on adaptive finite element approximation

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
  • de Abreu, R.V.
This article is a review of our work towards a parameter-free method for simulation of turbulent flow at high Reynolds numbers. In a series of papers we have developed a model for turbulent flow in the form of weak solutions of the Navier-Stokes equations, approximated by an adaptive finite element method, where: (i) viscous dissipation is assumed to be dominated by turbulent dissipation proportional to the residual of the equations, and (ii) skin friction at solid walls is assumed to be negligible compared to inertial effects. The result is a computational model without empirical data, where the only model parameter is the local size of the finite element mesh. Under adaptive refinement of the mesh based on a posteriori error estimation, output quantities of interest in the form of functionals of the finite element solution converge to become independent of the mesh resolution, and thus the resulting method has no adjustable parameters. No ad hoc design of the mesh is needed, instead the mesh is optimized based on solution features, in particular no boundary layer mesh is needed. We connect the computational method to the mathematical concept of a dissipative weak solution of the Euler equations, as a model of high Reynolds number turbulent flow, and we highlight a number of benchmark problems for which the method is validated. The purpose of the article is to present the computational framework in a concise form, to report on recent progress, and to discuss open problems that are subject to ongoing research.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Adaptive simulation of unsteady flow past the submerged part of a floating wind turbine platform

  • Jansson, J.
  • Nava, V.
  • Sanchez, M.
  • Aguirre, G.
  • de Abreu, R.V.
  • Hoffman, J.
  • Villate, J.L.
Offshore floating platforms for wind turbines represent challenging concepts for designers trying to combine an optimal compromise between cost effectiveness and performance. Modelling of the hydrodynamic behaviour of the structure is still the subject of wide debate in the technical communities. The assessment of the hydrodynamics of the support structure is not an easy task as the floaters consist of an assembly of columns, braces and pontoons, commonly also with heave plates: Each of these components corresponds to a different hydrodynamic model and it further interacts with the other elements. This results in very complex non-linear modeling, which makes it necessary to resort to computational fluid dynamics (CFD) methods for the evaluation of the combined hydrodynamics. In the framework of the collaboration between the Basque Centre for Applied Mathematics (BCAM) and Tecnalia R&I, the interaction of the sea flow with a semisubmersible floating offshore wind platform have been calculated by using the open source solver Unicorn in the FEniCS-HPC framework when subject to a steady inflow. The prototype of the platform consists in a semi-submersible 4-columns column stabilized platform - NAUTILUS Floating Solutions concept-; columns are connected by a rigid ring pontoon provided with heave damping plates at the bottom. The novelty of the approach in FEniCS-HPC hinges upon an implicit formulation for the turbulence, a cheap free slip model of the boundary layer and goal-oriented mesh adaptivity [8, 6, 9, 20, 1]. We find that the results are consistent with experimental results for cylinders at high Reynolds number.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

FEniCS-HPC: Automated predictive high-performance finite element computing with applications in aerodynamics

  • Hoffman, J.
  • Jansson, J.
  • Jansson, N.
Developing multiphysics finite element methods (FEM) and scalable HPC implementations can be very challenging in terms of software complexity and performance, even more so with the addition of goal-oriented adaptive mesh refinement. To manage the complexity we in this work present general adaptive stabilized methods with automated implementation in the FEniCS-HPC automated open source software framework. This allows taking the weak form of a partial differential equation (PDE) as input in near-mathematical notation and automatically generating the low-level implementation source code and auxiliary equations and quantities necessary for the adaptivity. We demonstrate new optimal strong scaling results for the whole adaptive framework applied to turbulent flow on massively parallel architectures down to 25000 vertices per core with ca. 5000 cores with the MPI-based PETSc backend and for assembly down to 500 vertices per core with ca. 20000 cores with the PGAS-based JANPACK backend. As a demonstration of the power of the combination of the scalability together with the adaptive methodology allowing prediction of gross quantities in turbulent flow we present an application in aerodynamics of a full DLR-F11 aircraft in connection with the HiLift-PW2 benchmarking workshop with good match to experiments.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Many-task computing on many-core architectures

  • Valero-Lara, P.
  • Nookala, P.
  • Pelayo, F.L.
  • Jansson, J.
  • Dimitropoulos, S.
  • Raicu, I.
Many-Task Computing (MTC) is a common scenario for multiple parallel systems, such as cluster, grids, cloud and supercomputers, but it is not so popular in shared memory parallel processors. In this sense and given the spectacular growth in performance and in number of cores integrated in many-core architectures, the study of MTC on such architectures is becoming more and more relevant. In this paper, authors present what are those programming mechanisms to take advantages of such massively parallel features for the particular target of MTC. Also, the hardware features of the two dominant many-core platforms (NVIDIA's GPUs and Intel Xeon Phi) are also analyzed for our specific framework. Given the important differences in terms of hardware and software in our two many-core platforms, we have considered different strategies based on CUDA (for GPUs) and OpenMP (for Intel Xeon Phi). We carried out several test cases based on an appropriate and widely studied problem for benchmarking as matrix multiplication. Essentially, this study consisted of comparing the time consumed for computing in parallel several tasks one by one (the whole computational resources are used just to compute one task at a time) with the time consumed for computing in parallel the same set of tasks simultaneously (the whole computational resources are used for computing the set of tasks at very same time). Finally, we compared both software-hardware scenarios to identify the most relevant computer features in each of our many-core architectures.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

BBIPED: BCAM-Baltogar Industrial Platform for Engineering Design

  • Alonso-Montes, C.
  • Garcia, I.
  • Ramezani, A.
  • Remaki, L.
Currently, commercial software for computational fluid dynamics offers a good set of features to deal with traditional designs. Within a competitive market industrial innovation is a key factor that must be faced by companies. However, the design of solutions to deal with industrial challenges cannot be done within commercial software due to the lack of flexibility. Open source initiatives are a good option but the learning curve is high, specially for industrial engineers profiles. In this paper, we present the BBIPED platform which has been designed to deal with turbomachinery applications in a simple and friendly way. The main goal is to keep the platform as simpler as possible providing the enough flexibility to include out-of-the-box solutions to cope with industrial challenges. BBIPED platform provides links with currently existing remarkable open source initiatives altogether with our own developments. Particularly, it is remarkable a first approach for automatic mesh generation based on geometry parametrization solution, and the provision of novel techniques to deal with multiple rotating frame (MRF): Multizone MRF an Virtual MRF. Case tests were designed to test the solutions and to assess and validate the results against commercial suites with promising results.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Lagged and instantaneous dynamical influences related to brain structural connectivity

  • Alonso, C.
  • Diez, I.
  • Remaki, L.
  • Escudero, I.
  • Mateos, B.
  • Rosseel, Y.
  • Marinazzo, D.
  • Stramaglia, S.
  • Cortes, J.M.
Contemporary neuroimaging methods can shed light on the basis of human neural and cognitive specializations, with important implications for neuroscience and medicine. Indeed, different MRI acquisitions provide different brain networks at the macroscale; whilst diffusion-weighted MRI (dMRI) provides a structural connectivity (SC) coincident with the bundles of parallel fibers between brain areas, functional MRI (fMRI) accounts for the variations in the blood-oxygenation-level-dependent T2* signal, providing functional connectivity (FC). Understanding the precise relation between FC and SC, that is, between brain dynamics and structure, is still a challenge for neuroscience. To investigate this problem, we acquired data at rest and built the corresponding SC (with matrix elements corresponding to the fiber number between brain areas) to be compared with FC connectivity matrices obtained by three different methods: directed dependencies by an exploratory version of structural equation modeling (eSEM), linear correlations (C) and partial correlations (PC). We also considered the possibility of using lagged correlations in time series; in particular, we compared a lagged version of eSEM and Granger causality (GC). Our results were two-fold: firstly, eSEM performance in correlating with SC was comparable to those obtained from C and PC, but eSEM (not C, nor PC) provides information about directionality of the functional interactions. Second, interactions on a time scale much smaller than the sampling time, captured by instantaneous connectivity methods, are much more related to SC than slow directed influences captured by the lagged analysis. Indeed the performance in correlating with SC was much worse for GC and for the lagged version of eSEM. We expect these results to supply further insights to the interplay between SC and functional patterns, an important issue in the study of brain physiology and function.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Numerical investigation of the aerodynamic performance for a wells-type turbine in a wave energy converter

  • Stipcich, G.
  • Ramezani, A.
  • Nava, V.
  • Touzon, I.
  • Sanchez-Lara, M.
  • Remaki, L.
Ocean waves constitute an extensive energy resource, whose extraction has been the subject of intense research activity in the last three decades. Among the different variants of Wave Energy Converters, the principle of the Oscillating Water Column (OWC) is one of the most promising ones. An OWC comprises two key elements: A collector chamber, which transfers the wave oscillations' energy to the air within the chamber by back and forth displacement, and a power take off system, which converts the pneumatic power into electricity or some other usable form. The Wells turbine is a self-rectifying air turbine, a suitable solution for energy extraction from reciprocating air flow in an OWC. In the present work, the steady state, inviscid flow in the Wells turbine is investigated by numerical simulations. The relatively novel Virtual Multiple Reference Frame (VMRF) technique is used to account for the rotary motion of the turbine, and the overall performance is compared with results in the literature.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Pseudospin lifetime in relaxed-shape armchair graphene nanoribbons due to in-plane phonon modes

  • Prabhakar, S.
  • Melnik, R.
  • Bonilla, L.
We study the influence of ripple waves on the band structures of strained armchair graphene nanoribbons. We argue that the Zeeman pseudospin (p-spin) splitting energy induced by ripple waves might not be neglected for smaller widths of armchair graphene nanoribbons (GNRs). We show that the p-spin splitting energy breaks the symmetry of degeneracy due to the ripple-induced Zeeman effect in GNRs, originating from electromechanical coupling. We estimate the p-spin lifetime in strained armchair GNRs caused by in-plane phonon modes for possible applications in straintronics and quantum information processing. By considering higher order terms in the strain tensor expansion, we also demonstrate that highly asymmetric band structures of GNRs induce asymmetric phonon-mediated p-spin relaxation. Such asymmetric p-spin relaxation is not possible for unstrained armchair and zigzag GNRs. In particular, we report that the p-spin transition rate decreases like B05 (as a function of p-magnetic fields), L-9 (as a function of GNR width) and τe-1, where τe is the externally applied tensile edge stress.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Multiple-time-stepping generalized hybrid Monte Carlo methods

  • Escribano, B.
  • Akhmatskaya, E.
  • Reich, S.
  • Azpiroz, J.M.
Performance of the generalized shadow hybrid Monte Carlo (GSHMC) method [1], which proved to be superior in sampling efficiency over its predecessors [2-4], molecular dynamics and hybrid Monte Carlo, can be further improved by combining it with multi-time-stepping (MTS) and mollification of slow forces. We demonstrate that the comparatively simple modifications of the method not only lead to better performance of GSHMC itself but also allow for beating the best performed methods, which use the similar force splitting schemes. In addition we show that the same ideas can be successfully applied to the conventional generalized hybrid Monte Carlo method (GHMC). The resulting methods, MTS-GHMC and MTS-GSHMC, provide accurate reproduction of thermodynamic and dynamical properties, exact temperature control during simulation and computational robustness and efficiency. MTS-GHMC uses a generalized momentum update to achieve weak stochastic stabilization to the molecular dynamics (MD) integrator. MTS-GSHMC adds the use of a shadow (modified) Hamiltonian to filter the MD trajectories in the HMC scheme. We introduce a new shadow Hamiltonian formulation adapted to force-splitting methods. The use of such Hamiltonians improves the acceptance rate of trajectories and has a strong impact on the sampling efficiency of the method. Both methods were implemented in the open-source MD package ProtoMol and were tested on a water and a protein systems. Results were compared to those obtained using a Langevin Molly (LM) method [5] on the same systems. The test results demonstrate the superiority of the new methods over LM in terms of stability, accuracy and sampling efficiency. This suggests that putting the MTS approach in the framework of hybrid Monte Carlo and using the natural stochasticity offered by the generalized hybrid Monte Carlo lead to improving stability of MTS and allow for achieving larger step sizes in the simulation of complex systems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Constant pressure hybrid Monte Carlo simulations in GROMACS

  • Fernández-Pendás, M.
  • Escribano, B.
  • Radivojevic, T.
  • Akhmatskaya, E.
Adaptation and implementation of the Generalized Shadow Hybrid Monte Carlo (GSHMC) method for molecular simulation at constant pressure in the NPT ensemble are discussed. The resulting method, termed NPT-GSHMC, combines Andersen barostat with GSHMC to enable molecular simulations in the environment natural for biological applications, namely, at constant pressure and constant temperature. Generalized Hybrid Monte Carlo methods are designed to maintain constant temperature and volume and extending their functionality to preserving pressure is not trivial. The theoretical formulation of NPT-GSHMC was previously introduced. Our main contribution is the implementation of this methodology in the GROMACS molecular simulation package and the evaluation of properties of NPT-GSHMC, such as accuracy, performance, effectiveness for real physical systems in comparison with well-established molecular simulation techniques. Benchmarking tests are presented and the obtained preliminary results are promising. For the first time, the generalized hybrid Monte Carlo simulations at constant pressure are available within the popular open source molecular dynamics software package.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Computing the eigenvalues of realistic Daphnia models by pseudospectral methods

  • Breda, D.
  • Getto, P.
  • Sanchez Sanz, J.
  • Vermiglio, R.
This work deals with physiologically structured populations of the Daphnia type. Their biological modeling poses several computational challenges. In such models, indeed, the evolution of a size structured consumer described by a Volterra functional equation (VFE) is coupled to the evolution of an unstructured resource described by a delay differential equation (DDE), resulting in dynamics over an infinite dimensional state space. As additional complexities, the right-hand sides are both of integral type (continuous age distribution) and given implicitly through external ordinary differential equations (ODEs). Moreover, discontinuities in the vital rates occur at a maturation age, also given implicitly through one of the above ODEs. With the aim at studying the local asymptotic stability of equilibria and relevant bifurcations, we revisit a pseudospectral approach recently proposed to compute the eigenvalues of the infinitesimal generator of linearized systems of coupled VFEs/DDEs. First, we modify it in view of extension to nonlinear problems for future developments. Then, we consider a suitable implementation to tackle all the computational difficulties mentioned above: a piecewise approach to handle discontinuities, numerical quadrature of integrals, and numerical solution of ODEs. Moreover, we rigorously prove the spectral accuracy of the method in approximating the eigenvalues and how this outstanding feature is influenced by the other unavoidable error sources. Implementation details and experimental computations on existing available data conclude the work.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Microscopic Conductivity of Lattice Fermions at Equilibrium. Part II: Interacting Particles

  • Bru, J.-B.
  • de Siqueira Pedra, W.
We apply Lieb–Robinson bounds for multi-commutators we recently derived (Bru and de Siqueira Pedra, Lieb–Robinson bounds for multi-commutators and applications to response theory, 2015) to study the (possibly non-linear) response of interacting fermions at thermal equilibrium to perturbations of the external electromagnetic field. This analysis leads to an extension of the results for quasi-free fermions of (Bru et al. Commun Pure Appl Math 68(6):964–1013, 2015; Bru et al. J Math Phys 56:051901-1–051901-51, 2015) to fermion systems on the lattice with short-range interactions. More precisely, we investigate entropy production and charge transport properties of non-autonomous C*-dynamical systems associated with interacting lattice fermions within bounded static potentials and in presence of an electric field that is time and space dependent. We verify the 1st law of thermodynamics for the heat production of the system under consideration. In linear response theory, the latter is related with Ohm and Joule’s laws. These laws are proven here to hold at the microscopic scale, uniformly with respect to the size of the (microscopic) region where the electric field is applied. An important outcome is the extension of the notion of conductivity measures to interacting fermions.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Kinetic energy estimates for the accuracy of the time-dependent Hartree-Fock approximation with Coulomb interaction

  • Bach, V.
  • Breteaux, S.
  • Petrat, S.
  • Pickl, P.
  • Tzaneteas, T.
We study the time evolution of a system of $N$ spinless fermions in $\mathbb{R}^3$ which interact through a pair potential, e.g., the Coulomb potential. We compare the dynamics given by the solution to Schrödinger's equation with the time-dependent Hartree-Fock approximation, and we give an estimate for the accuracy of this approximation in terms of the kinetic energy of the system. This leads, in turn, to bounds in terms of the initial total energy of the system.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Universal Bounds for Large Determinants from Non–Commutative Ho ̈lder Inequalities in Fermionic Constructive Quantum Field Theory

  • Bru, J.-B.
  • de Siqueira Pedra, W.
Efficiently bounding large determinants is an essential step in non–relati- vistic fermionic constructive quantum field theory, because, together with the summability of the interaction and the covariance, it implies the abso- lute convergence of the perturbation expansion of all correlation functions in terms of powers of the strength u ∈ R of the interparticle interaction. We provide, for large determinants of fermionic convariances, sharp bounds which hold for all (bounded and unbounded, the latter not being limited to semibounded) one–particle Hamiltonians. We find the smallest universal determinant bound to be exactly 1. In particular, the convergence of pertur- bation series at u = 0 of any fermionic quantum field theory is ensured by the decay properties of the covariance and the interparticle interaction alone. Our proofs use Ho ̈lder inequalities for general non–commutative Lp–spaces derived by Araki and Masuda [AM].
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Equisingularity in One-Parameter Families of Generically Reduced Curves

  • Fernández de Bobadilla, J.
  • Snoussi, J.
  • Spivakovsky, M.
We explore some equisingularity criteria in one-parameter families of generically reduced curves. We prove the equivalence between Whitney regularity and Zariski’s discriminant criterion. We prove that topological triviality implies smoothness of the normalized surface. Examples are given to show that Witney regularity and equisaturation are not stable under the blow-up of the singular locus nor under the Nash modification.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Modelling wildland fire propagation by tracking random fronts

  • Pagnini, G.
  • Mentrelli, A.
Abstract. Wildland fire propagation is studied in the liter- ature by two alternative approaches, namely the reaction– diffusion equation and the level-set method. These two ap- proaches are considered alternatives to each other because the solution of the reaction–diffusion equation is generally a continuous smooth function that has an exponential de- cay, and it is not zero in an infinite domain, while the level- set method, which is a front tracking technique, generates a sharp function that is not zero inside a compact domain. However, these two approaches can indeed be considered complementary and reconciled. Turbulent hot-air transport and fire spotting are phenomena with a random nature and they are extremely important in wildland fire propagation. Consequently, the fire front gets a random character, too; hence, a tracking method for random fronts is needed. In par- ticular, the level-set contour is randomised here according to the probability density function of the interface particle dis- placement. Actually, when the level-set method is developed for tracking a front interface with a random motion, the re- sulting averaged process emerges to be governed by an evo- lution equation of the reaction–diffusion type. In this recon- ciled approach, the rate of spread of the fire keeps the same key and characterising role that is typical of the level-set ap- proach. The resulting model emerges to be suitable for sim- ulating effects due to turbulent convection, such as fire flank and backing fire, the faster fire spread being because of the actions by hot-air pre-heating and by ember landing, and also due to the fire overcoming a fire-break zone, which is a case not resolved by models based on the level-set method. More- over, from the proposed formulation, a correction follows for the formula of the rate of spread which is due to the mean jump length of firebrands in the downwind direction for the leeward sector of the fireline contour. The presented study constitutes a proof of concept, and it needs to be subjected to a future validation.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Front propagation in anomalous diffusive media governed by time-fractional diffusion

  • Mentrelli, A.
  • Pagnini, G.
In this paper, a multi-dimensional model is proposed to study the propagation of random fronts in media in which anomalous diffusion takes place. The front position is obtained as the weighted mean of fronts calculated by means of the level set method, using as weight-function the probability density function which characterizes the anomalous diffusion process. Since anomalous diffusion is assumed to be governed by a time-fractional diffusion equation, its fundamental solution is the required probability density function. It is shown that this fundamental solution can be expressed in the multi-dimensional case in terms of the well-known M-Wright/Mainardi function, as in the one-dimensional case. Making use of this representation for the practical purpose of numerical evaluation, the propagation of random fronts in two-dimensional subdiffusive media is discussed and investigated.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Self-similar stochastic models with stationary increments for symmetric space-time fractional diffusion

  • Pagnini, G.
An approach to develop stochastic models for studying anomalous diffusion is proposed. In particular, in this approach the stochastic particle trajectory is based on the fractional Brownian motion but, for any realization, it is multiplied by an independent random variable properly distributed. The resulting probability density function for particle displacement can be represented by an integral formula of subordination type and, in the single-point case, it emerges to be equal to the solution of the spatially symmetric space-time fractional diffusion equation. Due to the fractional Brownian motion, this class of stochastic processes is self-similar with stationary increments in nature and uniquely defined by the mean and the auto-covariance structure analogously to the Gaussian processes. Special cases are the time-fractional diffusion, the space-fractional diffusion and the classical Gaussian diffusion.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Averaged control

  • Zuazua, E.
We analyze the problem of controlling parameter-dependent systems. We introduce the notion of averaged control according to which the quantity of interest is the average of the states with respect to the parameter. First we consider the problem of controllability for linear finite-dimensional systems and show that a necessary and sufficient condition for averaged controllability is an averaged rank condition, in the spirit of the classical rank condition for linear control systems, but involving averaged momenta of any order of the matrices generating the dynamics and representing the control action. We also describe some open problems and directions of possible research, in particular on the average controllability of evolution partial differential equations. In this context we analyze also the averaged version of a classical optimal control problem for a parameter dependent elliptic equation and derive the corresponding optimality system.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The turnpike property infinite-dimensional nonlinear optimal control

  • Trélat, E.
  • Zuazua, E.
Turnpike properties have been established long time ago in finite-dimensional optimal control problems arising in econometry. They refer to the fact that, under quite general assumptions, the optimal solutions of a given optimal control problem settled in large time consist approximately of three pieces, the first and the last of which being transient short-time arcs, and the middle piece being a long-time arc staying exponentially close to the optimal steady-state solution of an associated static optimal control problem. We provide in this paper a general version of a turnpike theorem, valuable for nonlinear dynamics without any specific assumption, and for very general terminal conditions. Not only the optimal trajectory is shown to remain exponentially close to a steady-state, but also the corresponding adjoint vector of the Pontryagin maximum principle. The exponential closedness is quantified with the use of appropriate normal forms of Riccati equations. We show then how the property on the adjoint vector can be adequately used in order to initialize successfully a numerical direct method, or a shooting method. In particular, we provide an appropriate variant of the usual shooting method in which we initialize the adjoint vector, not at the initial time, but at the middle of the trajectory.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Complexity and regularity of maximal energy domains for the wave equation with fixed initial data

  • Privat, Y.
  • Trélat, E.
  • Zuazua, E.
We consider the homogeneous wave equation on a bounded open connected subset Ω of IRn. Some initial data being specified, we consider the problem of determining a measurable subset ω of Ω maximizing the L2-norm of the restriction of the corresponding solution to ω over a time interval [0, T], over all possible subsets of Ω having a certain prescribed measure. We prove that this problem always has at least one solution and that, if the initial data satisfy some analyticity assumptions, then the optimal set is unique and moreover has a finite number of connected components. In contrast, we construct smooth but not analytic initial conditions for which the optimal set is of Cantor type and in particular has an infinite number of connected components.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

  • Vargas, A.N.
  • Acho, L.
  • Pujol, G.
  • Costa, E.F.
  • Ishihara, J.Y.
  • Do Val, J.B.R.
Summary The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite-time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off-line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state-feedback only. To illustrate the usefulness of the approach, real-time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov-driven voltage fluctuations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Time asymptotics for a critical case in fragmentation and growth-fragmentation equations

  • Doumic, M.
  • Escobedo, M.
Fragmentation and growth-fragmentation equations is a family of problems with varied and wide applications. This paper is devoted to the description of the long-time asymptotics of two critical cases of these equations, when the division rate is constant and the growth rate is linear or zero. The study of these cases may be reduced to the study of the following fragmentation equation: ∂ / ∂t u(t, x) + u(t, x) = ∞ ∫ x k0 (x/y )u(t, y)dy. Using the Mellin transform of the equation, we determine the long-time behavior of the solutions. Our results show in particular the strong dependence of this asymptotic behavior with respect to the initial data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Null controllability for a heat equation with a singular inverse-square potential involving the distance to the boundary function

  • Biccari, U.
  • Zuazua, E.
This article is devoted to the analysis of control properties for a heat equation with a singular potential μ/δ2, defined on a bounded C2 domain Ω⊂RN, where δ is the distance to the boundary function. More precisely, we show that for any μ≤1/4 the system is exactly null controllable using a distributed control located in any open subset of Ω, while for μ>1/4 there is no way of preventing the solutions of the equation from blowing-up. The result is obtained applying a new Carleman estimate.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometry shapes propagation: Assessing the presence and absence of cortical symmetries through a computational model of cortical spreading depression

  • Kroos, J.M.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
Cortical spreading depression (CSD), a depolarization wave which originates in the visual cortex and travels toward the frontal lobe, has been suggested to be one neural correlate of aura migraine. To the date, little is known about the mechanisms which can trigger or stop aura migraine. Here, to shed some light on this problem and, under the hypothesis that CSD might mediate aura migraine, we aim to study different aspects favoring or disfavoring the propagation of CSD. In particular, by using a computational neuronal model distributed throughout a realistic cortical mesh, we study the role that the geometry has in shaping CSD. Our results are two-fold: first, we found significant differences in the propagation traveling patterns of CSD, both intra and inter-hemispherically, revealing important asymmetries in the propagation profile. Second, we developed methods able to identify brain regions featuring a peculiar behavior during CSD propagation. Our study reveals dynamical aspects of CSD, which, if applied to subject-specific cortical geometry, might shed some light on how to differentiate between healthy subjects and those suffering migraine.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

New Theory of Flight

  • Hoffman, J.
  • Jansson, J.
  • Claes, J.
We present a new mathematical theory explaining the fluid mechanics of subsonic flight, which is fundamentally different from the existing boundary layer-circulation theory by Prandtl–Kutta–Zhukovsky formed 100 year ago. The new theory is based on our new resolution of d’Alembert’s paradox showing that slightly viscous bluff body flow can be viewed as zero-drag/lift potential flow modified by 3d rotational slip separation arising from a specific separation instability of potential flow, into turbulent flow with nonzero drag/lift. For a wing this separation mechanism maintains the large lift of potential flow generated at the leading edge at the price of small drag, resulting in a lift to drag quotient of size 15–20 for a small propeller plane at cruising speed with Reynolds number $Re \approx 10^7$ and a jumbojet at take-off and landing with $Re \approx 10^8$, which allows flight at affordable power. The new mathematical theory is supported by computed turbulent solutions of the Navier–Stokes equations with a slip boundary condition as a model of observed small skin friction of a turbulent boundary layer always arising for $Re > 10^6$, in close accordance with experimental observations over the entire range of angle of attacks including stall using a few millions of mesh points for a full wing-body configuration.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Penalized composite link models for aggregated spatial count data: a mixed model approach

  • Ayma, D.
  • Durban, M.
  • Lee, D.J.
  • Eilers, P.H.C.
Mortality data provide valuable information for the study of the spatial distri- bution of mortality risk, in disciplines such as spatial epidemiology and public health. However, they are frequently available in an aggregated form over irreg- ular geographical units, hindering the visualization of the underlying mortality risk. Also, it can be of interest to obtain mortality risk estimates on a finer spatial resolution, such that they can be linked to potential risk factors that are usually measured in a different spatial resolution. In this paper, we propose the use of the penalized composite link model and its mixed model representation. This model considers the nature of mortality rates by incorporating the population size at the finest resolution, and allows the creation of mortality maps at a finer scale, thus reducing the visual bias resulting from the spatial aggrega- tion within original units. We also extend the model by considering individual random effects at the aggregated scale, in order to take into account the overdis- persion. We illustrate our novel proposal using two datasets: female deaths by lung cancer in Indiana, USA, and male lip cancer incidence in Scotland counties. We also compare the performance of our proposal with the area-to-point Poisson kriging approach.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Numerical Bifurcation Analysis of Physiologically Structured Populations: Consumer-Resource, Cannibalistic and Trophic Models

  • Sanchez Sanz, J.
  • Getto, P.
With the aim of applying numerical methods, we develop a formalism for physiologically structured population models in a new generality that includes con- sumer resource, cannibalism and trophic models. The dynamics at the population level are formulated as a system of Volterra functional equations coupled to ODE. For this general class we develop numerical methods to continue equilibria with respect to a parameter, detect transcritical and saddle-node bifurcations and compute curves in parameter planes along which these bifurcations occur. The methods combine curve continuation, ODE solvers and test functions. Finally we apply the method to the above models using existing data for Daphnia magna consuming Algae, and for Perca fluviatilis feeding on Daphnia magna. In particular we validate the methods by deriving expressions for equilibria and bifurcations with respect to which we compute rrors, and by comparing the obtained curves with curves that were computed earlier with other methods. We also present new curves to show how the methods can easily be applied to derive new biological insight. Schemes of algorithms are included.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An efficient approximation to the K-means clustering for Massive Data

  • Capo, M.
  • Pérez, A.
  • Lozano, J.A.
Due to the progressive growth of the amount of data available in a wide variety of scientific fields, it has become more difficult to manipulate and analyze such information. In spite of its dependency on the initial settings and the large number of distance computations that it can require to converge, the $K$-means algorithm remains as one of the most popular clustering methods for massive datasets. In this work, we propose an efficient approximation to the $K$-means problem intended for massive data. Our approach recursively partitions the entire dataset into a small number of subsets, each of which is characterized by its representative (center of mass) and weight (cardinality), afterwards a weighted version of the $K$-means algorithm is applied over such local representation, which can drastically reduce the number of distances computed. In addition to some theoretical properties, experimental results indicate that our method outperforms well-known approaches, such as the $K$-means++ and the minibatch $K$-means, in terms of the relation between number of distance computations and the quality of the approximation., Marco Capó and Aritz Pérez are partially supported by the Basque Government, Elkartek and by the Spanish Ministry of Economy and Competitiveness MINECO: BCAM Severo Ochoa excelence accreditation SVP-2014- 068574 and SEV-2013-0323. José A. Lozano is partially supported by the Basque Government (IT609-13), Elkartek and the Spanish Ministry of Economy and Competitiveness MINECO (TIN2013-41272P).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Temporal excitation patterns on the cerebral cortex as a result of migraine modeling

  • Kroos, J.M.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
The complex, highly individual, geometry of the cerebral cortex in humans presents a major challenge in studying the spreading of spontaneous neuronal activity. Recent computational advances [1] allow to simulate the propagation of depolarization waves on the macroscale and for individual geometries, reconstructed from accurate medical imaging as MRI, with high levels of detail. In this paper we take advantage of such technique to study the temporal excitation patterns that follow the passage of a depolarization wave on the cerebral cortex., This work was supported by the Bizkaia Talent and European Commission through COFUND under the grant BRAhMS – Brain Aura Mathematical Simulation– (AYD-000- 285), and also by the Basque Government through the BERC 2014-2017 program, and by the Spanish Ministry of Economics and Competitiveness MINECO: BCAM Severo Ochoa excellence accreditation SEV-2013-0323. JMC acknowledges financial support from Ikerbasque: The Basque Foundation for Science and Euskampus at UPV/EHU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Patient-specific computational modeling of Cortical Spreading Depression via Diffusion Tensor Imaging

  • Kroos, J.M.
  • Marinelli, I.
  • Diez, I.
  • Cortes, J.M.
  • Stramaglia, S.
  • Gerardo-Giorda, L.
Cortical Spreading Depression (CSD), a depolarization wave originat- ing in the visual cortex and traveling towards the frontal lobe, is com- monly accepted as a correlate of migraine visual aura. As of today, little is known about the mechanisms that can trigger or stop such phenomenon. However, the complex and highly individual characteristics of the brain cortex suggest that the geometry might have a significant impact in sup- porting or contrasting the propagation of CSD. Accurate patient-specific computational models are fundamental to cope with the high variability in cortical geometries among individuals, but also with the conduction anisotropy induced in a given cortex by the complex neuronal organisa- tion in the grey matter. In this paper we integrate a distributed model for extracellular potassium concentration with patient-specific diffusivity tensors derived locally from Diffusion Tensor Imaging data., This work was supported by the Bizkaia Talent and European Commission through COFUND under the grant BRAhMS - Brain Aura Mathematical Sim- ulation (AYD-000-285), by the Basque Government through the BERC 2014- 2017 program, and by the Spanish Ministry of Economics and Competitiveness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013- 0323 and the Spanish "Plan Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad" under Grant BELEMET - Brain ELEctro- METabolic modeling and numerical approximation (MTM2015-69992-R). JMC acknowledges financial support from Ikerbasque: The Basque Foundation for Science and Euskampus at UPV/EHU.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the bound states of Schrödinger operators with

\delta
  • Lotoreichik, V.
  • Ourmières-Bonafos, T.
In dimension greater than or equal to three, we investigate the spectrum of a Schrödinger operator with a $\delta$-interaction supported on a cone whose cross section is the sphere of codimension two. After decomposing into fibers, we prove that there is discrete spectrum only in dimension three and that it is generated by the axisymmetric fiber. We get that these eigenvalues are nondecreasing functions of the aperture of the cone and we exhibit the precise logarithmic accumulation of the discrete spectrum below the threshold of the essential spectrum., V.Lotoreichik is supported by the Czech Science Foundation (GACˇR) under the project 14-06818S. He is grateful for the stimulating research stay and the hospitality at the Basque Center for Applied Mathematics in May 2015 where a part of this paper was written.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Mixed weak type estimates: Examples and counterexamples related to a problem of E. Sawyer

  • Ombrosi, S.
  • Pérez, C.
In this paper we study mixed weighted weak-type inequal- ities for families of functions, which can be applied to study classic operators in harmonic analysis. Our main theorem extends the key result from [CMP2].
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Bootstrap-based procedures for inference in nonparametric ROC regression analysis

  • Rodríguez-Álvarez, M.X.
  • Roca-Pardiñas, J.
  • Cadarso-Suárez, C.
  • Tahoces, P.G.
Before the use of a diagnostic test in a routine clinical setting, the rigorous evaluation of its diagnostic accuracy is an essential step. The receiver operating characteristic (ROC) curve is the measure of accuracy most widely used for continuous diagnostic tests. However, the possible impact of extra information about the patient (or even the environment) on diagnostic accuracy needs to be also assessed. In this paper, attention is focused on an estimator for the covariate-specific ROC curve based on direct regression modelling and nonparametric smoothing techniques. This approach defines the class of generalized additive models for the ROC curve (ROC-GAM). The main aim of the paper is to offer new inferential procedures for testing the effect of co- variates over the conditional ROC curve within the ROC-GAM context. Specifically, two different bootstrap-based tests are suggested to check (a) the possible effect of continuous covariates on the ROC curve; and (b) the presence of factor-by-curve interaction terms. The validity of the proposed bootstrap-based procedures is supported by simulations. To facilitate the application of these new procedures in practice, an R-package, known as npROCRegression, is provided and briefly described. Finally, data derived from a computed-aided diagnostic (CAD) system for the automatic detection of tumour masses in breast cancer is analysed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Quantitative weighted mixed weak-type inequalities for classical operators

  • Ombrosi, S.
  • Pérez, C.
  • Recchi, J.
We improve on several mixed weak type inequalities both for the Hardy-Littlewood maximal function and for Calderón-Zygmund operators. These type of inequalities were considered by Muckenhoupt and Wheeden and later on by Sawyer estimating the $L^{1,\infty}(uv)$ norm of $v^{−1}T(fv)$ for special cases. The emphasis is made in proving new and more precise quantitative estimates involving the $A_p$ or $A_{\infty}$ constants of the weights involved.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reverse Hölder Property for Strong Weights and General Measures

  • Luque, T.
  • Pérez, C.
  • Rela, E.
We present dimension-free reverse Hölder inequalities for strong $A^{\ast}_p$ weights, $1 \le p < \infty$. We also provide a proof for the full range of local integrability of $A^{\ast}_1$ weights. The common ingredient is a multidimensional version of Riesz’s “rising sun” lemma. Our results are valid for any nonnegative Radon measure with no atoms. For $p = \infty$, we also provide a reverse Ho ̈lder inequality for certain product measures. As a corollary we derive mixed $A^{\ast}_p − A^{\ast}_{\infty}$ weighted estimates., The third author is partially supported by grants UBACyT 20020130100403BA, and PIP (CONICET) 11220110101018.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards efficient 5-axis flank CNC machining of free-form surfaces via fitting envelopes of surfaces of revolution

  • Bo, P.
  • Barton, M.
  • Plakhotnik, D.
  • Pottmann, H.
We introduce a new method that approximates free-form surfaces by envelopes of one-parameter motions of surfaces of revolution. In the context of 5-axis computer numerically controlled (CNC) machining, we propose a flank machining methodology which is a preferable scallop-free scenario when the milling tool and the machined free-form surface meet tangentially along a smooth curve. We seek both an optimal shape of the milling tool as well as its optimal path in 3D space and propose an optimization based framework where these entities are the unknowns. We propose two initialization strategies where the first one requires a user’s intervention only by setting the initial position of the milling tool while the second one enables to prescribe a preferable tool-path. We present several examples showing that the proposed method recovers exact envelopes, including semi-envelopes and incomplete data, and for general free-form objects it detects envelope sub-patches.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Gauss-Galerkin quadrature rules for quadratic and cubic spline spaces and their application to isogeometric analysis

  • Barton, M.
  • Calo, V.M.
We introduce Gaussian quadrature rules for spline spaces that are frequently used in Galerkin discretizations to build mass and stiffness matrices. By definition, these spaces are of even degrees. The optimal quadrature rules we recently derived [6] act on spaces of the smallest odd degrees and, therefore, are still slightly sub-optimal. In this work, we derive optimal rules directly for even- degree spaces and therefore further improve our recent result. We use optimal quadrature rules for spaces over two elements as elementary building blocks and use recursively the homotopy continuation concept described in [5] to derive op- timal rules for arbitrary admissible numbers of elements. We demonstrate the proposed methodology on relevant examples, where we derive optimal rules for various even-degree spline spaces. We also discuss convergence of our rules to their asymptotic counterparts, these are the analogues of the midpoint rule of Hughes et al. [18], that are exact and optimal for infinite domains.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Borderline Weighted Estimates for Commutators of Singular Integrals

  • Pérez, C.
  • Rivera-Ríos, I.P.
In this paper we establish the following estimate \[ w\left(\left\{ x\in\mathbb{R}^{n}\,:\,\left|[b,T]f(x)\right| > \lambda\right\} \right)\leq \frac{c_{T}}{\varepsilon^{2}}\int_{\mathbb{R}^{n}}\Phi\left(\|b\|_{BMO}\frac{|f(x)|}{\lambda}\right)M_{L(\log L)^{1+\varepsilon}}w(x)dx \] where $w\geq0, \, 0<\varepsilon<1$ and $\Phi(t)=t(1+\log^+(t))$. This inequality relies upon the following sharp $L^p$ estimate \[ \|[b,T]f\|_{L^{p}(w)}\leq c_{T}\left(p'\right)^{2}p^{2}\left(\frac{p-1}{\delta}\right)^{\frac{1}{p'}} \|b\|_{BMO} \, \|f \|_{L^{p}(M_{L(\log L)^{2p-1+\delta}}w)} \]where $1<p<\infty, w\geq0 \text{ and } 0<\delta<1.$ As a consequence we recover the following estimate essentially contained in \cite{MR3008263}: \[w\left(\{x\in\mathbb{R}^{n}\,:\,\left|[b,T]f(x)\right| >\lambda\}\right)\leq c_T\,[w]_{A_{\infty}}\left(1+\log^{+}[w]_{A_{\infty}}\right)^{2}\int_{\mathbb{R}^{n}} \Phi\left(\|b\|_{BMO}\frac{|f(x)|}{\lambda}\right)Mw(x)dx\] We also obtain the analogue estimates for symbol-multilinear commutators for a wider class of symbols.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A note on the off-diagonal Muckenhoupt-Wheeden conjecture

  • Cruz-Uribe, D.
  • Martell, J.M.
  • Pérez, C.
We obtain the off-diagonal Muckenhoupt-Wheeden conjecture for Calderón-Zygmund operators. Namely, given $1 < p < q < \infty$ and a pair of weights $(u; v)$, if the Hardy-Littlewood maximal function satisfies the following two weight inequalities: $$ M:L^p(v) \to L^q(u) \quad \mbox{and} \quad M: L^{q'} (u^{1-q'}) \to (v^{1-p'} ); $$ then any Calderón-Zygmund operator $T$ and its associated truncated maximal operator $T_{*}$ are bounded from $M:L^p(v)$ to $L^q(u)$. Additionally, assuming only the second estimate for $M$ then $T$ and $T_{*}$ map continuously $M:L^p(v)$ to $L^{q,\infty}(u)$ We also consider the case of generalized Haar shift operators and show that their off-diagonal two weight estimates are governed by the corresponding estimates for the dyadic Hardy-Littlewood maximal function.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spectral Transitions for Aharonov-Bohm Laplacians on Conical Layers

  • Krejčiřík, D.
  • Lotoreichik, V.
  • Ourmières-Bonafos, T.
We consider the Laplace operator in a tubular neighbourhood of a conical surface of revolution, subject to an Aharonov-Bohm magnetic field supported on the axis of symmetry and Dirichlet boundary conditions on the boundary of the domain. We show that there exists a critical total magnetic flux depending on the aperture of the conical surface for which the system undergoes an abrupt spectral transition from infinitely many eigenvalues below the essential spectrum to an empty discrete spectrum. For the critical flux we establish a Hardy-type inequality. In the regime with infinite discrete spectrum we obtain sharp spectral asymptotics with refined estimate of the remainder and investigate the dependence of the eigenvalues on the aperture of the surface and the flux of the magnetic field.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Improved Quantification of Important Beer Quality Parameters based on Non-linear Calibration Methods applied to FT-MIR Spectra

  • Cernuda, C.
  • Lughofer, E.
  • Klein, H.
  • Forster, C.
  • Pawliczek, M.
  • Brandstetter, M.
During the production process of beer, it is of utmost importance to guarantee a high consistency of the beer quality. For instance, the bitterness is an essential quality parameter which has to be controlled within the specifications already at the beginning of the production process in the unfermented beer (wort) as well as in final products such as beer and beer mix beverages. Nowadays, analytical techniques for quality control in beer production are mainly based on manual supervision, i.e. samples are taken from the process and analyzed in the laboratory. This typically requires significant lab technicians efforts for only a small fraction of samples to be analyzed, which leads to significant costs for beer breweries and companies. Fourier transform mid-infrared (FT-MIR) spectroscopy was used in combination with non-linear multivariate calibration techniques to overcome (i) the time consuming off-line analyses in beer production and (ii) already known limitations of standard linear chemometric methods , like partial least squares (PLS), for important quality parameters [1][2] such as bitterness, citric acid, total acids, free amino nitrogen, final attenuation or foam stability. The calibration models are established with enhanced non-linear techniques based (i) on a new piece-wise linear version of PLS by employing fuzzy rules for local partitioning the latent variable space and (ii) on extensions of support vector regression variants (ε-PLSSVR and ν-PLSSVR), for overcoming high computation times in high-dimensional problems and time-intensive and inappropriate settings of the kernel parameters. Furthermore, we introduce a new model selection scheme based on bagged ensembles in order to improve robustness and thus predictive quality of the final models. The approaches are tested on real-world calibration data sets for wort and beer mix beverages, and successfully compared to linear methods, as showing a clear out-performance in most cases and being able to meet the model quality requirements defined by the experts at the beer company.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Geometric inequalities from phase space translations

  • Huber, S.
  • König, R.
  • Vershynina, A.
We establish a quantum version of the classical isoperimetric inequality relating the Fisher information and the entropy power of a quantum state. The key tool is a Fisher information inequality for a state which results from a certain convolution operation: the latter maps a classical probability distribution on phase space and a quantum state to a quantum state. We show that this inequality also gives rise to several related inequalities whose counterparts are well-known in the classical setting: in particular, it implies an entropy power inequality for the mentioned convolution operation as well as the isoperimetric inequality, and establishes concavity of the entropy power along trajectories of the quantum heat diffusion semigroup. As an application, we derive a Log-Sobolev inequality for the quantum Ornstein-Uhlenbeck semigroup, and argue that it implies fast convergence towards the fixed point for a large class of initial states.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A_1
  • Pérez, C.
  • Rivera-Ríos, I.P.
  • Roncal, L.
Quantitative $A_1-A_\infty$ estimates for rough homogeneous singular integrals $T_{\Omega}$ and commutators of $BMO$ symbols and $T_{\Omega}$ are obtained. In particular the following estimates are proved: \[ \|T_\Omega \|_{L^p(w)}\le c_{n,p}\|\Omega\|_{L^\infty} [w]_{A_1}^{\frac{1}{p}}\,[w]_{A_{\infty}}^{1+\frac{1}{p'}}\|f\|_{L^p(w)} \] and \[ \| [b,T_{\Omega}]f\| _{L^{p}(w)}\leq c_{n,p}\|b\|_{BMO}\|\Omega\|_{L^{\infty}} [w]_{A_1}^{\frac{1}{p}}[w]_{A_{\infty}}^{2+\frac{1}{p'}}\|f\|_{L^{p}\left(w\right)}, \] for $1<p<\infty$ and $1/p+1/p'=1$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Uniqueness and Properties of Distributional Solutions of Nonlocal Equations of Porous Medium Type

  • Del Teso, F.
  • Endal, J.
  • Jacobsen, E.R.
We study the uniqueness, existence, and properties of bounded distributional solutions of the initial value problem for the anomalous diffusion equation $\partial_tu-\mathcal{L}^\mu [\varphi (u)]=0$. Here $\mathcal{L}^\mu$ can be any nonlocal symmetric degenerate elliptic operator including the fractional Laplacian and numerical discretizations of this operator. The function $\varphi:\mathbb{R} \to \mathbb{R}$ is only assumed to be continuous and nondecreasing. The class of equations include nonlocal (generalized) porous medium equations, fast diffusion equations, and Stefan problems. In addition to very general uniqueness and existence results, we obtain stability, $L^1$-contraction, and a priori estimates. We also study local limits, continuous dependence, and properties and convergence of a numerical approximation of our equations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Optimal control of the Lotka–Volterra system: turnpike property and numerical simulations

  • Ibañez, A.
The Lotka-Volterra model is a differential system of two coupled equations representing the interaction of two species: a prey one and a predator one. We formulate an optimal control problem adding the effect of hunting both species as the control variable. We analyse the optimal hunting problem paying special attention to the nature of the optimal state and control trajectories in long time intervals. To do that, we apply recent theoretical results on the frame to show that, when the time horizon is large enough, optimal strategies are nearly steady-state. Such path is known as turnpike property. Some experiments are performed to observe such turnpike phenomenon in the hunting problem. Based on the turnpike property, we implement a variant of the single shooting method to solve the previous optimisation problem, taking the middle of the time interval as starting point.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On sums involving Fourier coefficients of Maass forms for SL(3,Z)

  • Jääsaari, J.
  • Vesalainen, E.V.
We derive a truncated Voronoi identity for rationally additively twisted sums of Fourier coefficients of Maass forms for SL(3,Z), and as an application obtain a pointwise estimate and a second moment estimate for the sums in question.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reconstruction from boundary measurements for less regular conductivities

  • García, A.
  • Zhang, G.
In this paper, following Nachman's idea [14] and Haberman and Tataru's idea [9], we reconstruct $C^1$ conductivity $\gamma$ or Lipchitz conductivity $\gamma$ with small enough value of $|\nabla log\gamma|$ in a Lipschitz domain $\Omega$ from the Dirichlet-to-Neumann map $\Lambda_{\gamma}$. In the appendix the authors and R. M. Brown recover the gradient of a $C^1$-conductivity at the boundary of a Lipschitz domain from the Dirichlet-to-Neumann map $\Lambda_{\gamma}$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Hidden electronic rule in the "cluster-plus-glue-Atom" model

  • Du, J.
  • Dong, C.
  • Melnik, R.
  • Kawazoe, Y.
  • Wen, B.
Electrons and their interactions are intrinsic factors to affect the structure and properties of materials. Based on the “cluster-cluster-plus-glue-atom” model, an electron counting rule for complex metallic alloys (CMAs) has been revealed in this work (i. e. the CPGAMEC rule). Our results on the cluster structure and electron concentration of CMAs with apparent cluster features, indicate that the valence electrons’ number per unit cluster formula for these CMAs are specific constants of eight-multiples and twelve-multiples. It is thus termed as specific electrons cluster formula. This CPGAMEC rule has been demonstrated as a useful guidance to direct the design of CMAs with desired properties, while its practical applications and underlying mechanism have been illustrated on the basis of CMAs’ cluster structural features. Our investigation provides an aggregate picture with intriguing electronic rule and atomic structural features of CMAs.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A note on the Boltzmann distribution and the linear ordering problem

  • Ceberio, J.
  • Mendiburu, A.
  • Lozano, J.A.
The Boltzmann distribution plays a key role in the field of optimization as it directly connects this field with that of probability. Basically, given a function to optimize, the Boltzmann distribution associated to this function assigns higher probability to the candidate solutions with better quality. Therefore, an efficient sampling of the Boltzmann distribution would turn optimization into an easy task. However, inference tasks on this distribution imply performing operations over an exponential number of terms, which hinders its applicability. As a result, the scientific community has investigated how the structure of objective functions is translated to probabilistic properties in order to simplify the corresponding Boltzmann distribution. In this paper, we elaborate on the properties induced in the Boltzmann distribution associated to permutation-based combinatorial optimization problems. Particularly, we prove that certain characteristics of the linear ordering problem are translated as conditional independence relations to the Boltzmann distribution in the form of L − decomposability.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Estimating attraction basin sizes

  • Hernando, L.
  • Mendiburu, A.
  • Lozano, J.A.
The performance of local search algorithms is influenced by the properties that the neighborhood imposes on the search space. Among these properties, the number of local optima has been traditionally considered as a complexity measure of the instance, and different methods for its estimation have been developed. The accuracy of these estimators depends on properties such as the relative attraction basin sizes. As calculating the exact attraction basin sizes becomes unaffordable for moderate problem sizes, their estimations are required. The lack of techniques achieving this purpose encourages us to propose two methods that estimate the attraction basin size of a given local optimum. The first method takes uniformly at random solutions from the whole search space, while the second one takes into account the structure defined by the neighborhood. They are tested on different instances of problems in the permutation space, considering the swap and the adjacent swap neighborhoods.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Adaptive multi-stage integrators for optimal energy conservation in molecular simulations

  • Fernández-Pendás, M.
  • Akhmatskaya, E.
  • Sanz-Serna, J.M.
We introduce a new Adaptive Integration Approach (AIA) to be used in a wide range of molecular simulations. Given a simulation problem and a step size, the method automatically chooses the optimal scheme out of an available family of numerical integrators. Although we focus on two-stage splitting integrators, the idea may be used with more general families. In each instance, the system-specific integrating scheme identified by our approach is optimal in the sense that it provides the best conservation of energy for harmonic forces. The AIA method has been implemented in the BCAM-modified GROMACS software package. Numerical tests in molecular dynamics and hybrid Monte Carlo simulations of constrained and unconstrained physical systems show that the method successfully realizes the fail-safe strategy. In all experiments, and for each of the criteria employed, the AIA is at least as good as, and often significantly outperforms the standard Verlet scheme, as well as fixed parameter, optimized two-stage integrators. In particular, for the systems where harmonic forces play an important role, the sampling efficiency found in simulations using the AIA is up to 5 times better than the one achieved with other tested schemes., MTM2013-46553-C3-1-P, BES-2014-068640
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A parallel Branch-and-Fix Coordination based matheuristic algorithm for solving large sized multistage stochastic mixed 0-1 problems

  • Aldasoro, U.
  • Escudero, L.F.
  • Merino, M.
  • Pérez, G.
A parallel matheuristic algorithm is presented as a spin-off from the exact Branch-and-Fix Coordination (BFC) algorithm for solving multistage stochastic mixed 0-1 problems. Some steps to guarantee the solution’s optimality are relaxed in the BFC algorithm, such that an incomplete backward branching scheme is considered for solving large sized problems. Additionally, a new branching criterion is considered, based on dynamically-guided and stage-wise ordering schemes, such that fewer Twin Node Families are expected to be visited during the execution of the so-called H-DBFC algorithm. The inner parallelization IH-DBFC of the new approach, allows to solve in parallel scenario clusters MIP submodels at different steps of the algorithm. The outer parallel version, OH-DBFC, considers independent paths and allows iterative incumbent solution values exchanges to obtain tighter bounds of the solution value of the original problem. A broad computational experience is reported for assessing the quality of the matheuristic solution for large sized instances. The instances dimensions that are considered are up to two orders of magnitude larger than in some other works that we are aware of. The optimality gap of the H-DBFC solution value versus the one obtained by a state-of-the-artMIP solver is very small, if any. The new approach frequently outperforms it in terms of solution’s quality and computing time. A comparison with our Stochastic Dynamic Programming algorithm is also reported. The use of parallel computing provides, on one hand, a perspective for solving very large sized instances and, on the other hand, an expected large reduction in elapsed time., MTM2015-65317-P, MTM2015-63710-P, IT928-16; UFI BETS 2011; IZO-SGI SGIker
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An optimization tool to design the field of a Solar Power Tower plant allowing heliostats of different sizes

  • Carrizosa, E.
  • Domínguez-Bravo, C.
  • Fernández-Cara, E.
  • Quero, M.
The design of a Solar Power Tower plant involves the optimization of the heliostat field layout. Fields are usually designed to have all heliostats of identical size. Although the use of a single heliostat size has been questioned in the literature, there are no tools to design fields with heliostats of several sizes at the same time. In this paper, the problem of optimizing the heliostat field layout of a system with heliostats of different sizes is addressed. We present an optimization tool to design solar plants allowing two heliostat sizes. The methodology is illustrated with a particular example considering different heliostat costs., MTM2013-41286-P (Spain) MTM2015-65915-R (Spain) P11-FQM-7603 (Andalucía) TD1207 (EU COST Action)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Large-scale simulations of synthetic markets

  • Gerardo-Giorda, L.
  • Germano, G.
  • Scalas, E.
High-frequency trading has been experiencing an increase of interest both for practical purposes within nancial institutions and within academic research; recently, the UK Government O ce for Science reviewed the state of the art and gave an outlook analysis. Therefore, models for tick-by-tick nancial time series are becoming more and more important. Together with high-frequency trading comes the need for fast simulations of full synthetic markets for several purposes including scenario analyses for risk evaluation. These simulations are very suitable to be run on massively parallel architectures. Aside more traditional large-scale parallel computers, high-end personal computers equipped with several multi-core CPUs and general-purpose GPU programming are gaining importance as cheap and easily available alternatives. A further option are FPGAs. In all cases, development can be done in a uni ed framework with standard C or C++ code and calls to appropriate libraries like MPI (for CPUs) or CUDA for (GPGPUs). Here we present such a prototype simulation of a synthetic regulated equity market. The basic ingredients to build a synthetic share are two sequences of random variables, one for the inter-trade durations and one for the tick-by-tick logarithmic returns. Our extensive simulations are based on several distributional choices for the above random variables, including Mittag-Le er distributed inter-trade durations and alpha-stable tick-by-tick logarithmic returns., Economic and Social Research Council (ESRC) grant number ES/K002309/1.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

New bounds for bilinear Calderón-Zygmund operators and applications

  • Damián, W.
  • Hormozi, M.
  • Li, K.
In this work we extend Lacey’s domination theorem to prove the pointwise control of bilinear Calderón–Zygmund operators with Dini–continuous kernel by sparse operators. The precise bounds are carefully tracked following the spirit in a recent work of Hytönen, Roncal and Tapiola. We also derive new mixed weighted estimates for a general class of bilinear dyadic positive operators using multiple $A_\infty$ constants inspired in the Fujii-Wilson and Hrusˇcˇev classical constants. These estimates have many new applications including mixed bounds for multilinear Calderón–Zygmund operators and their commutators with $BMO$ functions, square functions and multilinear Fourier multipliers., Analytic-probabilistic methods for borderline singular integrals; MTM2015-63699-P "Análisis Complejo, Espacios de Banach y Operadores"
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fractional kinetics emerging from ergodicity breaking in random media

  • Molina-Garcia, D.
  • Minh Pham, T.
  • Paradisi, P.
  • Manzo, C.
  • Pagnini, G.
We present a modelling approach for diffusion in a complex medium characterized by a random lengthscale. The resulting stochastic process shows subdiffusion with a behavior in qualitative agreement with single particle tracking experiments in living cells, such as ergodicity breaking, p- variation and aging. In particular, this approach recapitulates characteristic features previously described in part by the fractional Brownian motion and in part by the continuous-time random walk. Moreover, for a proper distribution of the lengthscale, a single parameter controls the ergodic- to-nonergodic transition and, remarkably, also drives the transition of the diffusion equation of the process from non-fractional to fractional, thus demonstrating that fractional kinetics emerges from ergodicity breaking., SEV-2015-0522 FIS2014-56107- R, Fundació Privada CELLEX (Barcelona), HFSP (GA RGP0027/2012), LaserLab Europe 4 (GA 654148)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Smooth additive mixed models for predicting aboveground biomass

  • Sánchez-González, M.
  • Durban, M.
  • Lee, D.J.
  • Cañellas, I.
  • Sixto, H.
Aboveground biomass estimation in short-rotation forestry plantations is an essential step in the development of crop management strategies as well as allowing the economic viability of the crop to be determined prior to harvesting. Hence, it is important to develop new methodologies that improve the accuracy of predictions, using only a minimum set of easily obtainable information i.e. diameter and height. Many existing models base their predictions only on diameter (mainly due to the complexity of including further covariates), or rely on complicated equations to obtain biomass predictions. However, in tree species, it is important to include height when estimating aboveground biomass because this will vary from one genotype to another. This work proposes the use of a more flexible and easy to implement model for predicting aboveground biomass (stem, branches and total) as a smooth function of height and diameter using smooth additive mixed models which preserve the additive property necessary to model the relationship within wood fractions, and allows the inclusion of random effects and interaction terms. The model is applied to the analysis of three trials carried out in Spain, where nine clones at three different sites are compared. Also, an analysis of slash pine data is carried out in order to compared with the approach proposed by Parresol (2001)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A multi-objective memetic inverse solver reinforced by local optimization methods

  • Gajda-Zagórska, E.
  • Schaefer, R.
  • Smolka, M.
  • Pardo, D.
  • Alvarez-Aramberri, J.
We propose a new memetic strategy that can solve the multi-physics, complex inverse problems, formulated as the multi-objective optimization ones, in which objectives are misfits between the measured and simulated states of various governing processes. The multi-deme structure of the strategy allows for both, intensive, relatively cheap exploration with a moderate accuracy and more accurate search many regions of Pareto set in parallel. The special type of selection operator prefers the coherent alternative solutions, eliminating artifacts appearing in the particular processes. The additional accuracy increment is obtained by the parallel convex searches applied to the local scalarizations of the misfit vector. The strategy is dedicated for solving ill-conditioned problems, for which inverting the single physical process can lead to the ambiguous results. The skill of the selection in artifact elimination is shown on the benchmark problem, while the whole strategy was applied for identification of oil deposits, where the misfits are related to various frequencies of the magnetic and electric waves of the magnetotelluric measurements
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Dimensionally adaptive hp-finite element simulation and inversion of 2D magnetotelluric measurements

  • Alvarez-Aramberri, J.
  • Pardo, D.
Magnetotelluric (MT) problems often contain different subdomains where the conductivity of the media depends upon one, two, or three spatial variables. Traditionally, when a MT problem incorporates a three-dimensional (3D) subdomain, the numerical method employed for simulation and inversion was 3D over then entire domain. In here, we propose to take advantage of the possibly lower dimensionality of certain subdomains during the inversion process. By doing so, we obtain significant computational savings (up to 75% in some scenarios) and increased accuracy on the results. We numerically illustrate this method by employing two dimensional (2D) computations based on a multi-goal oriented . hp-adaptive Finite Element Method (FEM) that exhibits superior convergence properties. Additionally, we provide a formulation for implementing an efficient adjoint based method for the computation of the derivatives of the impedance, and we show the importance of the (a) proper selection of the inversion variable, and (b) the advantages of using both the Transverse Electric (TE) and Transverse Magnetic (TM) measurements for the proper inversion of MT data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Analytical evaluation of the performance of contact-Based messaging applications

  • Hernández-Orallo, E.
  • Murillo-Arcila, M.
  • Calafate, C.T.
  • Cano, J.C.
  • Conejero, J.A.
  • Manzoni, P.
Communications in mobile opportunistic networks, instead of using the Internet infrastructure, take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we analytically model the performance of mobile opportunistic networks for contact-based messaging applications in city squares or gathering points, a key challenging topic that is required for the effective design of novel services. We take into account several social aspects such as: the density of people, the dynamic of people arriving and leaving a place, the size of the messages and the duration of the contacts. We base our models on Population Processes, an approach commonly used to represent the dynamics of biological populations. We study their stable equilibrium points and obtain analytical expressions for their resolution. The evaluations performed show that these models can reproduce the dynamics of message diffusion applications. We demonstrate that when the density of people increases, the effectiveness of the diffusion is improved. Regarding the arrival and departure of people, their impact is more relevant when the density of people is low. Finally, we prove that for large message sizes the effectiveness of the epidemic diffusion is reduced, and novel diffusion protocols should be considered., TEC2014-52690-R, MTM2013-47093-P, AICO/2015/113, ACOMP/2015/005
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The value of continuity: Refined isogeometric analysis and fast direct solvers

  • Garcia, D.
  • Pardo, D.
  • Dalcin, L.
  • Paszynski, M.
  • Collier, N.
  • Calo, V.M.
We propose the use of highly continuous finite element spaces interconnected with low continuity hyperplanes to maximize the performance of direct solvers. Starting from a highly continuous Isogeometric Analysis (IGA) discretization, we introduce $C^0$-separators to reduce the interconnection between degrees of freedom in the mesh. By doing so, both the solution time and best approximation errors are simultaneously improved. We call the resulting method ``refined Isogeometric Analysis (rIGA)". To illustrate the impact of the continuity reduction, we analyze the number of Floating Point Operations (FLOPs), computational times, and memory required to solve the linear system obtained by discretizing the Laplace problem with structured meshes and uniform polynomial orders. Theoretical estimates demonstrate that an optimal continuity reduction may decrease the total computational time by a factor between $p^2$ and $p^3$, with $p$ being the polynomial order of the discretization. Numerical results indicate that our proposed rIGA method delivers a speed-up factor proportional to $p^2$. In a $2D$ mesh with four million elements and $p = 5$, the linear system resulting from rIGA is solved $22$ times faster than the one from highly continuous IGA. In a $3D$ mesh with one million elements and $p = 3$, the linear rIGA system is solved $15$ times faster than the IGA one., The Project of the Spanish Ministry of Economy and Competitiveness MTM2016-76329-R. The Consolidated Research Group Grant IT649-13 on "Mathematical Modeling, Simulation, and Industrial Applications (M2SI)", The ICERMAR Project KK-2015/0000097.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A computational multiscale model of cortical spreading depression propagation

  • Kroos, J.M.
  • Gerardo-Giorda, L.
Cortical Spreading Depression (CSD) is a disruption of the brain hemostasis that, originating in the visual cortex and traveling towards the frontal lobe, temporarily impairs the normal functioning of neurons. Although, as of today, little is known about the mechanisms that can trigger or stop such phenomenon, CSD is commonly accepted as a correlate of migraine visual aura. In this paper, we introduce a multiscale PDE-ODE model that couples the propagation of the depolarization wave associated to CSD with a detailed electrophysiological model for the neuronal activity to capture both macroscopic and microscopic dynamics.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Dimension reduction for the micromagnetic energy functional on curved thin films

  • Di Fratta, G.
Micromagnetic con gurations of the vortex and onion type have beenwidely studied in the context of planar structures. Recently a signi cant interest to micromagnetic curved thin lms has appeared. In particular, thin spherical shells are currently of great interest due to their capability to support skyrmion solutions which can be stabilized by curvature e ects only, in contrast to the planar case where the intrinsic Dzyaloshinsky-Moriya interaction is required.The aimof the paper is to performa $\Gamma$-development analysis of the micromagnetic energy functional, when the shell is generated, like in the case of a sphere, by a bounded and convex smooth surface.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A strategy for self-adjointness of Dirac operators: Applications to the MIT bag model and delta-shell interactions

  • Ourmières-Bonafos, T.
  • Vega, L.
We develop an approach to prove self-adjointness of Dirac operators with boundary or transmission conditions at a $C^2$-compact surface without boundary. To do so we are lead to study the layer potential induced by the Dirac system as well as to define traces in a weak sense for functions in the appropriate Sobolev space. Finally, we introduce Calderón projectors associated with the problem and illustrate the method in two special cases: the well-known MIT bag model and an electrostatic $\delta$-shell interaction., ANR-11- LABX-0056-LMH, LabEx LMH
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fast estimation of multidimensional adaptive P-spline models

  • Rodríguez-Álvarez, M.X.
  • Durban, M.
  • Lee, D.J.
  • Eilers, P.H.C.
A fast and stable algorithm for estimating multidimensional adaptive P-spline models is presented. We call it as Separation of Overlapping Penalties (SOP) as it is an extension of the Separation of Anisotropic Penalties (SAP) algorithm. SAP was originally derived for the estimation of the smoothing parameters of a multidimensional tensor product P-spline model with anisotropic penalties., MTM2014-55966-P MTM2014-52184-P
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spatio-temporal adaptive penalized splines with application to Neuroscience

  • Rodríguez-Álvarez, M.X.
  • Durban, M.
  • Lee, D.J.
  • Eilers, P.H.C.
  • Gonzalez, F
Data analysed here derive from experiments conducted to study neurons' activity in the visual cortex of behaving monkeys. We consider a spatio-temporal adaptive penalized spline (P-spline) approach for modelling the firing rate of visual neurons. To the best of our knowledge, this is the first attempt in the statistical literature for locally adaptive smoothing in three dimensions. Estimation is based on the Separation of Overlapping Penalties (SOP) algorithm, which provides the stability and speed we look for., MTM2014-55966-P MTM2014-52184-P RETICS, Oftared - RD12/0034/0017
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A Short Survey on the Integral Identity Conjectureand Theories of Motivic Integration

  • Thuong, L.Q.
In Kontsevich-Soibelman’s theory of motivic Donaldson-Thomas invariants for 3-dimensional noncommutative Calabi-Yau varieties, the integral identity conjecture plays a crucial role as it involves the existence of these invariants. A purpose of this note is to show how the conjecture arises. Because of the integral identity’s nature, we shall give a quick tour on theories of motivic integration, which lead to a proof of the conjecture for algebraically closed ground fields of characteristic zero.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Hardy uncertainty principle, convexity and parabolic evolutions

  • Escauriaza, L.
  • Kenig, C.E.
  • Ponce, G.
  • Vega, L.
We give a new proof of the $L^2$ version of Hardy’s uncertainty principle based on calculus and on its dynamical version for the heat equation. The reasonings rely on new log-convexity properties and the derivation of optimal Gaussian decay bounds for solutions to the heat equation with Gaussian decay at a future time.We extend the result to heat equations with lower order variable coefficient., IT641-13 (GIC12/96), DMS-0968472, DMS-1265249
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Comparison of beta-binomial regression model approaches to analyze health related quality of life data

  • Najera-Zuloaga, J.
  • Lee, D.J.
  • Arostegui, I.
Health related quality of life (HRQoL) has become an increasingly important indicator of health status in clinical trials and epidemiological research. Moreover, the study of the relationship of HRQoL with patients' and disease's characteristics has become one of the primary aims of many HRQoL studies. HRQoL scores are usually assumed to be distributed as binomial random variables and often highly skewed. The use of the beta-binomial distribution in the regression context has been proposed to model such data, however, the beta-binomial regression has been performed by means of two di erent approaches in the literature: i) beta-binomial distribution with a logistic link; and ii) hierarchical generalized linear models (HGLMs). None of the existing literature in the analysis of HRQoL survey data has performed a comparison of both approaches in terms of adequacy and regression parameter interpretation context. This paper is motivated by the analysis of a real data application of HRQoL outcomes in patients with Chronic Obstructive Pulmonary Disease (COPD), where the use of both approaches yields to contradictory results in terms of covariate e ects signi cance and consequently the interpretation of the most relevant factors in HRQoL. We present an explanation of the results in both methodologies through a simulation study and address the need to apply the proper approach in the analysis of HRQoL survey data for practitioners, providing an R package., IT-620-13, MTM2013-40941-P, MTM2014-52184-P, MTM2016-74931-P, RD12/0001/0001 - REDISSEC
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A note on the determinant map

  • Dan, A.
  • Kaur, I.
Classically, there exists a determinant map from the moduli space of semi-stable sheaves on a smooth, projective variety to the Picard scheme. Unfortunately, if the underlying variety is singular, then such a map does not exist. In the case the underlying variety is a nodal curve, a similar map was produced by Bhosle on a stratification of the moduli space of semi-stable sheaves. In this note, we generalize this result to the higher dimension case.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A specialization property of index

  • Dan, A.
  • Kaur, I.
In [Kol13] Kollár defined $i$-th index of a proper scheme over a field. In this note we study how index behaves under specialization, in any characteristic.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Singularities of the Hilbert scheme of effective divisors

  • Dan, A.
In this article, we study the Hilbert scheme of effective divisors in smooth hypersurfaces in $\mathbb{P}^3$, a topic not extensively studied. We prove that there exists such effective divisors $D$ satisfying the property: there exists infinitesimal deformations of $D$ not deforming the associated reduced scheme $D_{\mathrm{red}}$. We observe that such infinitesimal deformations contribute to non-reducedness of the corresponding Hilbert scheme. We finally introduce a concept of simple extension of curves and notice that the above mentioned property is preserved under simple extension of curves.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the generalized Nash problem for smooth germs and adjacencies of curve singularities

  • Fernández de Bobadilla, J.
  • Pe Pereira, M.
  • Popescu-Pampu, P.
In this paper we explore the generalized Nash problem for arcs on a germ of smooth surface: given two prime divisors above its special point, to determine whether the arc space of one of them is included in the arc space of the other one. We prove that this problem is combinatorial and we explore its relation with several notions of adjacency of plane curve singularities.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A Jacobian module for disentanglements and applications to Mond's conjecture

BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Homogeneous singularity and the Alexander polynomial of a projective plane curve

  • Thuong, L.Q.
  • Tai, P.D.
  • Hoang Lan, N.P.
The Alexander polynomial of a plane curve is an important invariant in global theories on curves. However, it seems that this invariant and even a much stronger one the fundamental group of the complement of a plane curve may not distinguish non-reduced curves. In this article, we consider a general problem which concerns a hypersurface of the complex projective space $\mathbb P^n$ defined by an arbitrary homogeneous polynomial $f$. The singularity of $f$ at the origin of $\mathbb C^{n+1}$ is studied, by means of the characteristic polynomials $\Delta_l(t)$ of the monodromy, and via the relation between the monodromy zeta function and the Hodge spectrum. Especially, we go further with $\Delta_1(t)$ in the case $n=2$ and aim to regard it as an alternative object of the Alexander polynomial for $f$ non-reduced. This work is based on knowledge of multiplier ideals and local systems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Partial regularity and smooth topology-preserving approximations of rough domains

  • Ball, J.M.
  • Zarnescu, A.
For a bounded domain $\Omega\subset\mathbb{R}^m, m\geq 2,$ of class $C^0$, the properties are studied of fields of `good directions', that is the directions with respect to which $\partial\Omega$ can be locally represented as the graph of a continuous function. For any such domain there is a canonical smooth field of good directions defined in a suitable neighbourhood of $\partial\Omega$, in terms of which a corresponding flow can be defined. Using this flow it is shown that $\Omega$ can be approximated from the inside and the outside by diffeomorphic domains of class $C^\infty$. Whether or not the image of a general continuous field of good directions (pseudonormals) defined on $\partial\Omega$ is the whole of $S^{m-1}$ is shown to depend on the topology of $\Omega$. These considerations are used to prove that if $m=2,3$, or if $\Omega$ has nonzero Euler characteristic, there is a point $P\in\partial\Omega$ in the neighbourhood of which $\partial\Omega$ is Lipschitz. The results provide new information even for more regular domains, with Lipschitz or smooth boundaries.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Estimation of age-specific rates of reactivation and immune boosting of the varicella zoster virus

  • Marinelli, I.
  • van Lier, A.
  • de Melker, H.
  • Pugliese, A.
  • van Boven, M.
Studies into the impact of vaccination against the varicella zoster virus (VZV) have increasingly focused on herpes zoster (HZ), which is believed to be increasing in vaccinated populations with decreasing infection pressure. This idea can be traced back to Hope-Simpson's hypothesis, in which a person's immune status determines the likelihood that he/she will develop HZ. Immunity decreases over time, and can be boosted by contact with a person experiencing varicella (exogenous boosting) or by a reactivation attempt of the virus (endogenous boosting). Here we use transmission models to estimate age-specific rates of reactivation and immune boosting, exogenous as well as endogenous, using zoster incidence data from the Netherlands (2002–2011, n = 7026). The boosting and reactivation rates are estimated with splines, enabling these quantities to be optimally informed by the data. The analyses show that models with high levels of exogenous boosting and estimated or zero endogenous boosting, constant rate of loss of immunity, and reactivation rate increasing with age (to more than 5% per year in the elderly) give the best fit to the data. Estimates of the rates of immune boosting and reactivation are strongly correlated. This has important implications as these parameters determine the fraction of the population with waned immunity. We conclude that independent evidence on rates of immune boosting and reactivation in persons with waned immunity are needed to robustly predict the impact of varicella vaccination on the incidence of HZ., PIENTER2 serological study
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Predicting Pregnancy Outcomes Using Longitudinal Information: A Penalized Splines Mixed–Effects Model Approach

  • De la Cruz, R.
  • Fuentes, C.
  • Meza, C.
  • Lee, D.J.
  • Arribas-Gil, A.
We propose a semiparametric mixed–effects model (SNMM) using penalized splines to clas- sify longitudinal data and improve the prediction of a binary outcome. The work is motivated by a study in which different hormone levels were measured during the early stages of preg- nancy, and the challenge is using this information to predict normal versus abnormal pregnancy outcomes. The aim of this paper is to compare models and estimation strategies based on alternative formulations of SNMMs depending on the characteristics of the data set under con- sideration. For our motivating example, we address the classification problem using a particular case of the SNMM in which the parameter space has a finite dimensional component (fixed effects and variance components) and an infinite dimensional component (unknown function) that need to be estimated. The nonparametric component of the model is estimated using pe- nalized splines. For the parametric component, we compare the advantages of using random effects versus direct modeling of the correlation structure of the errors. Numerical studies show that our approach improves over other existing methods for the analysis of this type of data. Furthermore, the results obtained using our method support the idea that explicit modeling of the serial correlation of the error term improves the prediction accuracy with respect to a model with random effects, but independent errors., MTM2014-52184-P
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Comparison of two discrimination indexes in the categorisation of continuous predictors in time-to-event studies

  • Barrio, I.
  • Rodríguez-Álvarez, M.X.
  • Meira-Machado, L.
  • Esteban, C.
  • Arostegui, I.
The Cox proportional hazards model is the most widely used survival prediction model for analysing timeto-event data. To measure the discrimination ability of a survival model the concordance probability index is widely used. In this work we studied and compared the performance of two different estimators of the concordance probability when a continuous predictor variable is categorised in a Cox proportional hazards regression model. In particular, we compared the c-index and the concordance probability estimator. We evaluated the empirical performance of both estimators through simulations. To categorise the predictor variable we propose a methodology which considers the maximal discrimination attained for the categorical variable. We applied this methodology to a cohort of patients with chronic obstructive pulmonary disease, in particular, we categorised the predictor variable forced expiratory volume in one second in percentage., IT620-13 MTM2013-40941-P MTM2014-55966-P MTM2016-74931-P PEst-OE/MAT/UI0013/2014 PI020510 200111002 2005111008
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An even simpler understanding of quantum weak values

BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A computational model integrating brain electrophysiology and metabolism highlights the key role of extracellular potassium and oxygen

  • Calvetti, D.
  • Somersalo, E.
  • Gerardo-Giorda, L.
  • Capo Rangel, G.
The human brain is a small organ which uses a disproportional amount of the total metabolic energy pro- duction in the body. While it is well understood that the most significant energy sink is the maintenance of the neuronal membrane potential during the brain signaling activity, the role of astrocytes in the energy balance continues to be the topic of a lot of research. A key function of astrocytes, besides clearing glutamate from the synaptic clefts, is the potassium clearing after neuronal activation. Extracellular potassium plays a significant role in triggering neuronal firing, and elevated concentration of potassium may lead to abnormal firing pattern, e.g., seizures, thus emphasizing the importance of the glial K+ buffering role. The predictive mathematical model proposed in this paper elucidates the role of glial potassium clearing in brain energy metabolism, integrating a detailed model of the ion dynamics which regulates neuronal firing with a three compartment metabolic model. Because of the very different characteristic time scales of electrophysiology and metabolism, care must be taken when coupling the two models to ensure that the predictions, e.g., neuronal firing frequencies and the oxygen- glucose index (OGI) of the brain during activation and rest, are in agreement with empirical observations. The temporal multi-scale nature of the problem requires the design of new computational tools to ensure a stable and accurate numerical treatment of the problem. The model predictions for different protocols, including combinations of elevated activation and ischemic episodes, are in good agreement with experimental observations reported in the literature., This work was supported by the Bizkaia Talent and European Commission through CO- FUND under the grant CIPAS: Computational Inverse Problems Across Scales (AYD-000-278, 2015), by the Basque Government through the BERC 2014-2017 program, and by the Spanish Ministry of Economics and Competitive- ness MINECO through the BCAM Severo Ochoa excellence accreditation SEV-2013-0323 and the Spanish ”Plan Estatal de Investigacio ́n, Desarrollo e Innovacio ́n Orientada a los Retos de la Sociedad” under Grant BELEMET - Brain ELEctro-METabolic modeling and numerical approximation (MTM2015-69992-R). The work of Daniela Cal- vetti was partly supported by Grant Number 246665 from the Simons Foundation, and the work of Erkki Somersalo was partly supported by NSF Grant DMS 1016183. Daniela Calvetti and Erkki Somersalo were partly supported by NIH, grant 1U01GM111251-01.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

PetIGA-MF: A multi-field high-performance toolbox for structure-preserving B-splines spaces

  • Sarmiento, A.F.
  • Côrtes , A.M.A.
  • Garcia, D.
  • Dalcin, L.
  • Collier, N.
  • Calo, V.M.
We describe a high-performance solution framework for isogeometric discrete differential forms based on B-splines: PetIGA-MF. Built on top of PetIGA, an open-source library we have built and developed over the last decade, PetIGA-MF is a general multi-field discretization tool. To test the capabilities of our implementation, we solve different viscous flow problems such as Darcy, Stokes, Brinkman, and Navier–Stokes equations. Several convergence benchmarks based on manufactured solutions are presented assuring optimal convergence rates of the approximations, showing the accuracy and robustness of our solver., National Priorities Research Program grant 7-1482-1-278 from the Qatar National Research Fund (a member of The Qatar Foundation). Agencia Nacional de Promoción Científica y Tecnológica grants PICT 2014-2660 and PICT-E 2014-019. The J. Tinsley Oden Faculty Fellowship Research Program at the Institute for Computational Engineering and Sciences (ICES) of the University of Texas at Austin.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A multi-domain decomposition-based Fourier finite element method for the simulation of 3D marine CSEM measurements

  • Bakr, S.A.
  • Pardo, D.
We introduce a multi-domain decomposition Fourier finite element (MDDFFE) method for the simulation of three-dimensional (3D) marine controlled source electromagnetic measurement (CSEM). The method combines a 2D finite element (FE) method in two spatial dimensions with a hybrid discretization based on a Fourier FE method along the third dimension. The method employs a secondary field formulation rather than the total field formulation. We apply the MDDFFE method to several synthetic marine CSEM examples exhibiting bathymetry and/or multiple 3D subdomains. Numerical results show that the use of the MDDFFE method reduces the problem size by as much as 87 % in terms of the number of unknowns, without any sacrifice in accuracy.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A source time reversal method for seismicity induced by mining

  • Brevis, R.I.
  • Ortega, J.H.
  • Pardo, D.
In this work, we present a modified Time-Reversal Mirror (TRM) Method, called Source Time Reversal (STR), to find the spatial distribution of a seismic source induced by mining activity. This methodology is based on a known full description of the temporal dependence of the source, the Duhamel's principle, and the time-reverse property of the wave equation. We also provide an error estimate of the reconstruction when the measurements are acquired over the entire boundary, and we show experimentally the influence of measuring on a subdomain of the boundary. Numerical results indicate that the methodology is able to recover continuous and discontinuous sources, and it remains stable for partial boundary measurements.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards the development of adaptive finite element methods for internal flow aeroacoustics

  • de Abreu, R.V.
  • Hoffman, J.
  • Jansson, J.
We report the latest results obtained in the development of an adaptive finite element method for computational aeroacoustics (CAA). The new methodology is based on the General Galerkin (G2) method, which has been successfully used for the computation of incompressible, turbulent flow. Here, we simulate the flow past an in-duct mixer plate and compare the results with available experimental data. The comparisons include mean velocity profiles and frequency content of the turbulent signal. No direct simulation of sound or sound wave propagation has been performed; instead, simple analogy arguments have been used to extract acoustic results from incompressible simulations by assuming a direct correlation between the computed pressure drop signal and the sound at the far field. We were able to reproduce the sound signal from experiments with our incompressible simulation and our results compared well with both the level and the broadband frequency peak of the measured sound. We suggest that the methodology presented here is mainly suitable for the prediction of sound in low Mach number pipe flows.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Computation of slat noise sources using adaptive FEM and lighthill's analogy

  • Hoffman, J.
  • Jansson, J.
  • de Abreu, R.V.
This is a summary of preliminary results from simulations with the 30P30N high-lift device. We used the General Galerkin finite element method (G2), where no explicit subgrid model is used, and where the computational mesh is adaptively refined with respect to a posteriori error estimates for a quantity of interest. The mesh is fully unstructured and the solutions are time-resolved, which are key ingredients for solving challenging industrial applications in the field of aeroacoustics. We present preliminary results containing time-averaged quantities and snapshots of unsteady quantities, all reasonably agreeing with previous computational efforts. One important finding is that the use of adaptively generated meshes seems to be a more effcient way of computing aeroacoustic sources than by using "handmade" meshes.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Effect of trampling and digging from shell shing on Zostera noltei (Zosteraceae) intertidal seagrass beds

  • Garmendia, J.M.
  • Valle, M.
  • Borja, A.
  • Chust, G.
  • Lee, D.J.
  • Rodríguez, J.G.
  • Franco, J.
Seagrass beds are among the most valuable ecosystems in the world but they are also among the ones most affected by human activities, and they have decreased significantly in recent decades. In many areas, such as in the Basque Country (northern Spain), seagrass beds occupy areas that are also of interest for human activities such as recreation and shellfishing. They may therefore face a number of pressures that cause damage or irreversible states. Taking into account the limited distribution of seagrass beds in the Basque Country and the interest in their conservation, an eight-month field experiment focusing on the Zostera noltei growing season was carried out to evaluate the effect of shellfish gathering. We used generalized linear models to assess different intensities of trampling and digging, as the most important pressures of shellfishing applied to Zostera noltei beds. The results indicated that shoot density of Z. noltei was negatively altered by trampling treatments and positively affected (as a recovery) by digging treatments. This finding suggests that shellfishing adversely affects seagrass abundance and is potentially responsible for its low density in the Oka estuary. Our findings are important for management and should be taken into account in seagrass conservation and restoration programmes.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Enhancing sampling in atomistic simulations of solid state materials for batteries: a focus on olivine NaFePO

_4
  • Escribano, B.
  • Lozano, A.
  • Radivojevic, T.
  • Fernández-Pendás, M.
  • Carrasco, J.
  • Akhmatskaya, E.
The study of ion transport in electrochemically active materials for energy storage systems requires simulations on quantum-, atomistic- and meso-scales. The methods accessing these scales not only have to be effective but also well compatible to provide a full description of the underlying processes. We propose to adapt the Generalized Shadow Hybrid Monte Carlo (GSHMC) method to atomistic simulation of ion intercalation electrode materials for batteries. The method has never been applied to simulations in solid-state chemistry but it has been successfully used for simulation of biological macromolecules, demonstrating better performance and accuracy than can be achieved with the popular molecular dynamics (MD) method. It has been also extended to simulations on meso-scales, making it even more attractive for simulation of battery materials. We combine GSHMC with the dynamical core–shell model to incorporate polarizability into the simulation and apply the new Modified Adaptive Integration Approach, MAIA, which allows for a larger time step due to its excellent conservation properties. Also, we modify the GSHMC method, without losing its performance and accuracy, to reduce the negative effect of introducing a shell mass within a dynamical shell model. The proposed approach has been tested on olivine NaFePO$_4$, which is a promising cathode material for Na-ion batteries. The calculated Na-ion diffusion and structural properties have been compared with the available experimental data and with the results obtained using MD and the original GSHMC method. Based on these tests, we claim that the new technique is advantageous over MD and the conventional GSHMC and can be recommended for studies of other solid-state electrode and electrolyte materials whenever high accuracy and efficient sampling are critical for obtaining tractable simulation results., MTM2013-46553-C3-1-P Iberdrola Foundation “Grants for Research in Energy and Environment 2014” ELKARTEK Programme KK-2016/00026 BES-2014-068640 BERC 2014-2017 SEV-2013-0323
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Towards optimal advection using stretch-maximizing stream surfaces

  • Barton, M.
  • Kosinka, J.
We investigate a class of stream surfaces that expand in time as much as possible. Given a vector field, we look for seed curves that locally propagate in time in a stretch-maximizing manner, i.e., curves that infinitesimally expand most progressively. We show that such a curve is generically unique at every point in an incompressible flow and offers a very good initial guess for a stretch-maximizing stream surface. With the application of efficient fluid advection-diffusion in mind, we optimize fluid injection towards optimal advection and show several examples on benchmark datasets.