Pasar al contenido principal

INTEGRACION DEL SMARTPHONE Y EL VEHICULO PARA CONECTAR CONDUCTORES, SENSORES Y ENTORNO A TRAVES DE UNA ARQUITECTURA DE SERVICIOS FUNCIONALES

TEC2014-52690-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulating Opportunistic Networks: Survey and Future Directions

  • Dede, Jens
  • Förster, Anna
  • Herrera-Tapia, Jorge
  • Kuladinithi, Koojana
  • Kuppusamy, Vishnupriya
  • bin Muslim, Anas
  • Udugama, Asanga
  • Vatandas, Zeynep
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Simulation is one of the most powerful tools we have for evaluating the performance of opportunistic networks (OppNets). In this paper, we focus on available tools and mod- els, compare their performance and precision and experimentally show the scalability of different simulators. We also perform a gap analysis of state-of-the-art OppNet simulations and sketch out possible further development and lines of research. This paper is targeted at students starting work and research in this area while also serving as a valuable source of information for experienced researchers., This work was supported in part by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, in part by the Universidad Laica Eloy Alfaro de Manabi, and in part by the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion, Ecuador. (Corresponding author: Jens Dede.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flying ad-hoc network application scenarios and mobility models

  • Bujari, Armir
  • Palazzi, Claudio Enrico
  • Ronzani, Daniele
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Flying ad-hoc networks are becoming a promising solution for different application scenarios involving unmanned aerial vehicles, like urban surveillance or search and rescue missions. However, such networks present various and very specific communication issues. As a consequence, there are several research studies focused on analyzing their performance via simulation. Correctly modeling mobility is crucial in this context and although many mobility models are already available to reproduce the behavior of mobile nodes in an ad-hoc network, most of these models cannot be used to reliably simulate the motion of unmanned aerial vehicles. In this article, we list the existing mobility models and provide guidance to understand whether they could be actually adopted depending on the specific flying ad-hoc network application scenarios, while discussing their advantages and disadvantages.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Intelligent Transportation System Application for Smartphones Based on Vehicle Position Advertising and Route Sharing in Vehicular Ad-Hoc Networks

  • Hadiwardoyo, Seilendria Ardityarama
  • Patra, Subhadeep
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Alerting drivers about incoming emergency vehicles and their routes can greatly improve their travel times in congested cities, while reducing the risk of accidents due to distractions. This paper contributes to this goal by proposing Messiah, an Android application capable of informing regular vehicles about incoming emergency vehicles like ambulances, police cars and fire brigades. This is made possible by creating a network of vehicles capable of directly communicating between them. The user can, therefore, take driving decisions in a timely manner by considering incoming alerts. Using the support of our GRCBox hardware, the application can rely on vehicular ad-hoc network communications in the 5 GHz band, being V2V (vehicle-to-vehicle) communication provided through a combination of Android-based smartphone and our GRCBox device. The application was tested in three different scenarios with different levels of obstruction, showing that it is capable of providing alerts up to 300 meters, and notifying vehicles within less than one second, This work was partially supported by the "Ministerio de Economia y Competividad, Programa Estatal de Investigacion, Desarollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014", Spain, under Grant Nos. TEC2014-52690-R and BES-2015-075988.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Discretized Approach to Air Pollution Monitoring Using UAV-based Sensing

  • Alvear-Alvear, Óscar
  • Zema, Nicola
  • Natalizio, Enrico
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Recently, Unmanned Aerial Vehicles (UAVs) have become a cheap alternative to sense pollution values in a certain area due to their flexibility and ability to carry small sensing units. In a previous work, we proposed a solution, called Pollution-driven UAV Control (PdUC), to allow UAVs to autonomously trace pollutant sources, and monitor air quality in the surrounding area. However, despite operational, we found that the proposed solution consumed excessive time, especially when considering the battery lifetime of current multi-rotor UAVs. In this paper, we have improved our previously proposed solution by adopting a space discretization technique. Discretization is one of the most efficient mathematical approaches to optimize a system by transforming a continuous domain into its discrete counterpart. The improvement proposed in this paper, called PdUC-Discretized (PdUC-D), consists of an optimization whereby UAVs only move between the central tile positions of a discretized space, avoiding monitoring locations separated by small distances, and whose actual differences in terms of air quality are barely noticeable. We also analyze the impact of varying the tile size on the overall process, showing that smaller tile sizes offer high accuracy at the cost of an increased flight time. Taking into account the obtained results, we consider that a tile size of 100 x 100 meters offers an adequate trade-off between flight time and monitoring accuracy. Experimental results show that PdUC-D drastically reduces the convergence time compared to the original PdUC proposal without loss of accuracy, and it also increases the performance gap with standard mobility patterns such as Spiral and Billiard., This work was partially supported by the "Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a Retos de la Sociedad, Proyecto I+D+I TEC2014-52690-R", the framework of the DIVINA Challenge Team, which is funded under the Labex MS2T program. Labex MS2T is supported by the French Government, through the program "Investments for the future" managed by the National Agency for Research (Reference: ANR-11-IDEX-0004-02), the "Programa de becas SENESCYT de la Republica del Ecuador", and the Research Direction of the University of Cuenca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Improving Message Delivery Performance in Opportunistic Networks using a Forced-stop diffusion scheme

  • HERRERA TAPIA, JORGE
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tomás Domínguez, Andrés Enrique
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
The performance of mobile opportunistic networks strongly depends on contact duration. If the contact lasts less than the required transmission times, some messages will not get delivered, and the whole diffusion scheme will be seriously affected. In this paper we propose a new diffusion method, called Forced-Stop, that is based on controlling node mobility to guarantee a complete message transfer. Using the ONE simulator and realistic mobility traces, we compared our proposal with the classical Epidemic diffusion. We show that Forced-Stop improves the message delivery performance, increasing the delivery ratio up to 30\%, and reducing the latency of message delivery up to 40\%, with a limited impact on buffer utilisation and message relaying. These results can be a relevant indication to the designers of opportunistic network applications that could integrate in their products strategies to inform the user about the need to temporarily stop in order to favor the overall data delivery., This work was partially supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, the Generalitat Valenciana, Spain, under Grant AICO/2015/108, the Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación del Ecuador(SENESCYT), and the Universidad Laica Eloy Alfaro de Manabi, Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integration of vehicular network and smartphones to provide real-time visual assistance during overtaking

  • Patra, Subhadeep
  • Veelaert, Peter
  • Philips, Wilfried
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] The Intelligent Transportation Systems area has experienced great developments in the recent past, although suffering from slow adoption ratios thus depriving consumers of many interesting and innovative applications. The only solution to this problem is to develop Intelligent Transportation Systems solutions using the already available technologies that are within the grasp of the common people, to make them cost-effective, quick to deploy and easy to adopt. We have therefore developed an affordable Intelligent Transportation Systems that make use of standard smartphones to assist drivers when overtaking. The system autonomously creates a network among the close-by vehicles and provides drivers with a real-time video feed from the one located just ahead. Our system seamlessly offers a better view of the road, and of any vehicle travelling in the opposite direction, being especially useful when the front view of the driver is blocked by large vehicles. We have validated our overtaking assistance system, in both laboratory environment and realistic scenarios. The laboratory tests involved choosing the most effective video codec between MJPEG and H.264, for providing real-time video streaming. Then, using the chosen codec, we performed the outdoor tests to further tune our application to maximise performance. The preliminary results from our experiments allow being optimistic about the effectiveness and applicability of the proposed system., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was partially supported by the Special Research Fund – funding for joint doctorates of the Ghent University with scholarship code 01SF3316, and the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D Simulation Modeling of UAV-to-Car Communications

  • HADIWARDOYO, SEILENDRIA ARDITYARAMA
  • Ji, Yusheng
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In this paper, we propose a realistic model for simulating communications between unmanned aerial vehicles (UAVs), or drones, and ground vehicles, which can support mobile infrastructure to broadcast alerts in emergency situations. Three-dimensional positioning features should be considered in these simulations that involve UAVs and ground vehicles since communications links are not based on a flat surface. In fact, irregular terrains in the form of hills and mountains can greatly affect the communications by acting as obstacles that block radio signals partially or totally. Hence, in this paper, we propose a simulation model that conforms to this kind of communication and that was developed in the scope of the OMNeT++ simulator. The simulation results achieved showed a great degree of similarities with those results obtained in a real testbed for different scenarios. In addition, various path loss models and elevation models were considered to improve the level of realism of the simulation model., This work was supported in part by the Japan Society for the Promotion of Science KAKENHI under Grant JP16H02817 and Grant JP18KK0279, in part by the International Internship Program of the National Institute of Informatics, Japan, and in part by the Ministerio de Economía y Competividad, Programa Estatal de Investigación, Desarollo e Innovación Orientada a los Retos de la Sociedad, Proyectos ICDCI 2014, Government of Spain, under Grant TEC2014-52690-R and Grant BES-2015-075988.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Experimental Evaluation of a Low-Cost Digital Sign-Posts Architecture for ITS Applications

  • FERNANDEZ LAGUIA, CARLOS JAVIER
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Integrating road signs information is becoming a critical goal for Intelligent Transportation Systems (ITS). Unlike other driving automation features, this capacity requires not only the vehicle, but also posts and infrastructure to be adapted thus involving an investment that can only be justified by a substantial number of users. In this paper we describe an architecture that aims to facilitate the introduction and deployment of this technology based on low cost devices as the digital sign-posts and the integration of smartphones as an alternative in-vehicle user-interface. Wireless communications based on IEEE 802.11 is used for the basic connectivity requirements. From the results obtained through an experimental evaluation, we show that, despite the smartphone constraints, we can achieve successful detection and recognition experiences at up to 90 km/h. Ultimately the experiment described confirms that the use of smartphones represents an opportunity to expand wireless technology in the traffic sign digitalisation area., This work was partially supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Survey and Comparative Study of Broadcast Warning Message Dissemination Schemes for VANETs

  • Sangüesa-Escorihuela, Julio Alberto
  • Fogue, Manuel
  • Garrido, Piedad
  • Martinez Dominguez, Francisco Javier
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
Vehicle-to-vehicle (V2V) communications also known as vehicular ad hoc networks (VANETs) allow vehicles to cooperate to increase driving efficiency and safety on the roads. In particular, they are forecasted as one of the key technologies to increase traffic safety by providing useful traffic services. In this scope, vehicle-to-vehicle dissemination of warning messages to alert nearby vehicles is one of the most significant and representative solutions. The main goal of the different dissemination strategies available is to reduce the message delivery latency of such information while ensuring the correct reception of warning messages in the vehicle's neighborhood as soon as a dangerous situation occurs. Despite the fact that several dissemination schemes have been proposed so far, their evaluation has been done under different conditions, using different simulators, making it difficult to determine the optimal dissemination scheme for each particular scenario. In this paper, besides reviewing the most relevant broadcast dissemination schemes available in the recent literature, we also provide a fair comparative analysis by evaluating them under the same environmental conditions, focusing on the same metrics, and using the same simulation platform. Overall, we provide researchers with a clear guideline of the benefits and drawbacks associated with each scheme., This work was partially supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, and by the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental characterization of UAV-to-car communications

  • Hadiwardoyo, Seilendria Ardityarama
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Unmanned Aerial Vehicles (UAVs), popularly known as drones, can be deployed in conjunction with a network of ground vehicles. In situations where no infrastructure is available, drones can be deployed as mobile infrastructure elements to offer all types of services. Examples of such services include safety in rural areas where, upon an emergency event, drones can be quickly deployed as information relays for distributing critical warning to vehicles. In this work, we analyze the communications performance on the link between cars and drones taking into account the altitude, the antenna orientation, and the relative distance. The presented results show that the communication between a drone and a car can reach up to three kilometers in a rural area, and achieves at least a fifty percent success ratio for the delivery rate at a 2.7 km range. Finally, to allow integrating the communications link behaviour in different network simulators, the experimental results were also modeled with a modified Gaussian function that offers a suitable representation for this kind of communication., This work was partially supported by the "Ministerio de Economia y Competividad, Programa Estatal de Investigacion, Desarollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014", Spain, under grants TEC2014-52690-R and BES-2015-075988.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An ITS solution providing real-time visual overtaking assistance using smartphones

  • PATRA, SUBHADEEP
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
ITS solutions suffer from the slow pace of adoption by manufacturers despite the interest shown by both consumers and industry. Our goal is to develop ITS applications using already available technologies to make them affordable, quick to deploy, and easy to adopt. In this paper we introduce an ITS system for overtaking assistance that provides drivers with a real-time video feed from the vehicle located just in front. This provides a better view of the road ahead, and of any vehicles travelling in the opposite direction, being especially useful when the front view of the driver is blocked by large vehicles. We evaluated our application using H.264 and MJPEG video encoding formats, and determined the most effective codec choice for our case. Experimental results allow us to be optimistic about the effectiveness and applicability of smartphones in providing overtaking assistance based on video streaming in vehicular networks., This work was partially supported by the European Commission under Svagata.eu, the Erasmus Mundus Programme, Action 2 (EMA2) and the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating and Enhancing Information Dissemination in Urban Areas of Interest using Opportunistic Networks

  • Chancay-Garcia, Leonardo Javier
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Opportunistic networks can provide an alternative way to support the diffusion of information in special locations within a city, particularly in crowded spaces, where current wireless technologies can exhibit congestion issues. The efficiency of this diffusion relies mainly on user mobility. In fact, mobility creates the opportunities for contacts and, therefore, for data forwarding. This paper is, therefore, mainly focused on evaluating the dissemination of information in urban scenarios with different crowd densities and renewal rates. Through observation, we obtained real data from a local subway station and a plaza. These data were used, in combination with a pedestrian mobility simulator, to generate people mobility traces. We evaluated the diffusion of messages in these scenarios using the direct and the epidemic protocols. Experimental results show that content diffusion is mainly affected by two factors: degree of mobility and message size. Although it is well known that increasing the node density increases the diffusion rate, we show that, when keeping node density fixed, higher renewal rates cause the delivery ratio to drop. Moreover, we found that the relation between message size and contact duration is also a key factor, demonstrating that large messages can lead to a very low overall performance. Finally, with the aim of increasing the diffusion effectiveness of large messages, we propose an improvement over the Epidemic protocol, named EpidemicX2, based on the fragmentation of the data to be sent. The results show that the delivery ratio is increased, and the average delivery time is reduced, with no substantial increase in terms of overhead., This work was supported by the Ministerio de Economia y Competitividad, Spain, under Grant TEC2014-52690-R, and in part by the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion del Ecuador, Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FALCON: A New Approach for the Evaluation of Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Evaluating the performance of opportunistic networks with a high number of nodes is a challenging problem. Analytical models cannot provide a realistic evaluation of these networks, and simulations can be very time-consuming, sometimes requiring even weeks only to provide the results of a single scenario. In this paper, we present a fast evaluation model called FALCON (Fast Analysis, using a Lattice Cell model, of Opportunistic Networks) that is computationally very efficient and precise. The model is based on discretising space and time in order to reduce the computation complexity, and we formalised it as a discrete dynamic system that can be quickly solved. We describe some validation experiments showing that the precision of the obtained results is equivalent to the ones obtained with standard simulation approaches. The experiments also show that computation time is reduced by two orders of magnitude (from hours to seconds), allowing for a faster evaluation of opportunistic networks. Finally, we show that the FALCON model is easy to adapt and expand to consider different scenarios and protocols., This work was partially supported by Ministerio de Economia y Competitividad, Spain, grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic system supporting multicopter swarms with manual guidance

  • Fabra Collado, Francisco José
  • Zamora, Willian
  • Masanet, Joan
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Currently, there are some scenarios, such as search and rescue operations,where the deployment of manually guided swarms of UAVs can be necessary. In such cases, the pilot's commands are unknown a priori (unpredictable), meaning that the UAVs must respond in near real time to the movements of the leader UAV in order to maintain swarm consistency. In this paper we develop a protocol for the coordination of UAVs in a swarm where the swarm leader is controlled by a real pilot, and the other UAVs must follow it in real time to maintain swarm cohesion. We validate our solution using a realistic simulation software that we developed (ArduSim), testing flights with multiple numbers of UAVs and different swarm configurations. Simulation results show the validity of the proposed swarm coordination protocol, detailing the responsiveness limits of our solution, and finding the minimum distances between UAVs to avoid collisions., This work was partially supported by the "Programa Estatal de Investigation, Desarrollo e Innovation Orientada a Retos de la Sociedad, Proyecto TEC2014-52690-R", Spain, the "Universidad Laica Eloy Alfaro de Manabi," and the "Programa de Becas SENESCYT de la Republica del Ecuador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UNION: A Trust Model Distinguishing Intentional and Unintentional Misbehavior in Inter-UAV Communication

  • Barka, Ezedin
  • Kerrache, Chaker Abdelaziz
  • Lagraa, Nasreddine
  • Lakas, Abderrahmane
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Ensuring the desired level of security is an important issue in all communicating systems, and it becomes more challenging in wireless environments. Flying Ad Hoc Networks (FANETs) are an emerging type of mobile network that is built using energy-restricted devices. Hence, the communications interface used and that computation complexity are additional factors to consider when designing secure protocols for these networks. In the literature, various solutions have been proposed to ensure secure and reliable internode communications, and these FANET nodes are known as Unmanned Aerial Vehicles (UAVs). In general, these UAVs are often detected as malicious due to an unintentional misbehavior related to the physical features of the UAVs, the communication mediums, or the network interface. In this paper, we propose a new context-aware trust-based solution to distinguish between intentional and unintentional UAV misbehavior. The main goal is to minimize the generated error ratio while meeting the desired security levels. Our proposal simultaneously establishes the inter-UAV trust and estimates the current context in terms of UAV energy, mobility pattern, and enqueued packets, in order to ensure full context awareness in the overall honesty evaluation. In addition, based on computed trust and context metrics, we also propose a new inter-UAV packet delivery strategy. Simulations conducted using NS2.35 evidence the efficiency of our proposal, called UNION., at ensuring high detection ratios > 87% and high accuracy with reduced end-to-end delay, clearly outperforming previous proposals known as RPM, T-CLAIDS, and CATrust., This research is partially supported by the United Arab Emirates University (UAEU) under Grant no. 31T065.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RITA: RIsk-aware Trust-based Architecture for collaborative multi-hop vehicular communications

  • Kerrache, Chaker Abdelaziz
  • Lagraa, Nasreddine
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Trust establishment over vehicular networks can enhance the security against probable insider attackers. Regrettably, existing solutions assume that the attackers have always a dishonest behavior that remains stable over time. This assumption may be misleading, as the attacker can behave intelligently to avoid being detected. In this paper, we propose a novel solution that combines trust establishment and a risk estimation concerning behavior changes. Our proposal, called risk-aware trust-based architecture, evaluates the trust among vehicles for independent time periods, while the risk estimation computes the behavior variation between smaller, consecutive time periods in order to prevent risks like an intelligent attacker attempting to bypass the security measures deployed. In addition, our proposal works over a collaborative multi-hop broadcast communication technique for both vehicle-to-vehicle and vehicle-to-roadside unit messages in order to ensure an efficient dissemination of both safety and infotainment messages. Simulation results evidence the high efficiency of risk-aware trust-based architecture at enhancing the detection ratios by more than 7% compared with existing solutions, such as T-CLAIDS and AECFV, even in the presence of high ratios of attackers, while offering short end-to-end delays and low packet loss ratios., This work was partially supported by both the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, and the Ministere de l'enseignement superieur et de la recherche scientifique, Programme National Exceptionnel P.N.E 2015/2016, Algeria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling and Characterization of Traffic Flows in Urban Environments

  • Zambrano-Martinez, Jorge
  • Soler Fernández, David
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Currently, one of the main challenges faced in large metropolitan areas is traffic congestion. To address this problem, adequate traffic control could produce many benefits, including reduced pollutant emissions and reduced travel times. If it were possible to characterize the state of traffic by predicting future traffic conditions for optimizing the route of automated vehicles, and if these measures could be taken to preventively mitigate the effects of congestion with its related problems, the overall traffic flow could be improved. This paper performs an experimental study of the traffic distribution in the city of Valencia, Spain, characterizing the different streets of the city in terms of vehicle load with respect to the travel time during rush hour traffic conditions. Experimental results based on realistic vehicular traffic traces from the city of Valencia show that only some street segments fall under the general theory of vehicular flow, offering a good fit using quadratic regression, while a great number of street segments fall under other categories. Although in some cases such discrepancies are related to lack of traffic, injecting additional vehicles shows that significant mismatches still persist. Thus, in this paper we propose an equation to characterize travel times over a segment belonging to the sigmoid family; specifically, we apply logistic regression, being able to significantly improve the curve fitting results for most of the street segments under analysis. Based on our regression results, we performed a clustering analysis of the different street segments, showing that they can be classified into three well-defined categories, which evidences a predictable traffic distribution using the logistic regression throughout the city during rush hours, and allows optimizing the traffic for automated vehicles., This work was partially supported by Valencia's Traffic Management Department, by the "Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I + D + I 2014", Spain, under Grant TEC2014-52690-R, and the "Programa de Becas SENESCYT" de la Republica del Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

EYES: A novel overtaking assistance system for vehicular networks

  • Patra, Subhadeep
  • Arnanz, Javier
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Developments in the ITS area are received with great expectation by both consumers and industry. Despite their huge potential benefits, ITS solutions suffer from the slow pace of adoption by manufacturers. In this paper we propose EYES, an ITS system that aims at helping drivers in overtaking. The system autonomously creates a network of the devices running EYES, and provides drivers with a video feed from the vehicle located just ahead, thus presenting a better view of any vehicles coming from the opposite direction and the road ahead. This is specially useful when the front view of the driver is blocked by large vehicles, and thus the decision whether to overtake can be taken based on the visuals provided by the application. We have validated EYES, the proposed overtaking assistance system, in both indoor and realistic scenarios involving vehicular network, and preliminary results allow being optimistic about its effectiveness and applicability., This work was partially supported by the European Commission under Svagata.eu, the Erasmus Mundus Programme, Action 2 (EMA2) and the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate Ambient Noise Assessment Using Smartphones

  • Zamora-Mero, Willian Jesus
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Nowadays, smartphones have become ubiquitous and one of the main communication resources for human beings. Their widespread adoption was due to the huge technological progress and to the development of multiple useful applications. Their characteristics have also experienced a substantial improvement as they now integrate multiple sensors able to convert the smartphone into a flexible and multi-purpose sensing unit. The combined use of multiple smartphones endowed with several types of sensors gives the possibility to monitor a certain area with fine spatial and temporal granularity, a procedure typically known as crowdsensing. In this paper, we propose using smartphones as environmental noise-sensing units. For this purpose, we focus our study on the sound capture and processing procedure, analyzing the impact of different noise calculation algorithms, as well as in determining their accuracy when compared to a professional noise measurement unit. We analyze different candidate algorithms using different types of smartphones, and we study the most adequate time period and sampling strategy to optimize the data-gathering process. In addition, we perform an experimental study comparing our approach with the results obtained using a professional device. Experimental results show that, if the smartphone application is well tuned, it is possible to measure noise levels with a accuracy degree comparable to professional devices for the entire dynamic range typically supported by microphones embedded in smartphones, i.e., 35 95 dB., This work was partially supported by the “Programa Estatal de Investigación, Desarrollo e InnovaciOn Orientada a Retos de la Sociedad, Proyecto TEC2014-52690-R”, the “Universidad Laica Eloy Alfaro de Manabí” and the “Programa de Becas SENESCYTde la República del Ecuador.”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A SIR-based model for contact-based messaging applications supported by permanent infrastructure

  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo-Arcila, Marina
[EN] In this paper, we focus on the study of coupled systems of ordinary differential equations (ODEs) describing the diffusion of messages between mobile devices. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. SIR (Sane, Infected, Recovered) models permit to represent the diffusion of messages using an epidemiological based approach. The question we analyse in this work is whether the coexistence of a fixed infrastructure can improve the diffusion of messages and thus justify the additional costs. We analyse this case from the point of view of dynamical systems, finding and characterising the admissible equilibrium of this scenario. We show that a centralised diffusion is not efficient when people density reaches a sufficient value. This result supports the interest in developing opportunistic networks for occasionally crowded places to avoid the cost of additional infrastructure., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R, MTM2016-75963-P & BCAM Severo Ochoa excellence accreditation SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108, ACOMP/2015/005, GVA/2018/110), by the Basque Government through the BERC 2014-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lowest thermal transmittance of an external wall under budget,material and thickness restrictions: An integer linear programming approach

  • Soler Fernández, David
  • Salandin, Andrea
  • Micó, Joan C.|||0000-0001-7120-5458
[EN] This paper deals with the minimization of a building¿s external wall thermal transmittance, with theaim of improving the energy efficiency of the building. The wall¿s thermal transmittance must abide bythe current legislation, but also suit the limitations of other construction parameters, mainly budget andthickness, but also time limit, workforce, number and thickness of the layers and availability of materialsdepending on the approach.The optimization is achieved formulating an Integer Linear Programming (ILP) problem involving theparameters mentioned above. Therefore, any available ILP solver can be run to obtain the best combinationof the different materials and thicknesses for the layers, in order to minimize the thermal transmittance.This paper presents a case study of a common but representative external wall consisting of 6 layers,with more than 670,000 possible combinations of materials and their thicknesses. The study concludeswith a comparison of the lowest thermal transmittance obtained for a selection of budget and thicknesscombinations for the mentioned wall., This work was partially supported by the "Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion 582 Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014", Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computing the minimum construction cost of a building s external wall taking into account its energy efficiency

  • Salandin, Andrea
  • Soler Fernández, David
[EN] The construction of a building¿s external wall is subject to many restrictions such as budget, workforce, availability of materials, thickness, maintenance cost, time limit and specially, energy efficiency legislation intended at mitigating the negative effects of the energy consumption and obtaining a more sustainable and healthier indoor environment. The choice of the appropriate material and thickness composing each layer of an external wall can significantly reduce the energy consumption of the building without adversely affecting the cost of the wall. By using Integer Linear Programming (ILP), the aim of this paper is to obtain this best choice of materials and thicknesses to minimize the construction cost of an external wall while complying with the abovementioned restrictions. A case study is presented with more than 5.5 million combinations of different selected materials and their thicknesses for the different layers of the wall. The ILP problem has been solved for 165 scenarios that take into account different maximal allowed thermal transmittances and a range of the most usual thicknesses and material options of an external wall., This work was partially supported by the "Ministerio de Economia y Competitividad, Programa Estatal de Investigacion Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014", Spain, under Grant TEC2014-52690-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Trust Management for Vehicular Networks: An Adversary-Oriented Overview

  • Kerrache, Chaker Abdelaziz
  • Lagraa, Nasreddine
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Cooperative Intelligent Transportation Systems, mainly represented by vehicular ad hoc networks (VANETs), are among the key components contributing to the Smart City and Smart World paradigms. Based on the continuous exchange of both periodic and event triggered messages, smart vehicles can enhance road safety, while also providing support for comfort applications. In addition to the different communication protocols, securing such communications and establishing a certain trustiness among vehicles are among the main challenges to address, since the presence of dishonest peers can lead to unwanted situations. To this end, existing security solutions are typically divided into two main categories, cryptography and trust, where trust appeared as a complement to cryptography on some specific adversary models and environments where the latter was not enough to mitigate all possible attacks. In this paper, we provide an adversary-oriented survey of the existing trust models for VANETs. We also show when trust is preferable to cryptography, and the opposite. In addition, we show how trust models are usually evaluated in VANET contexts, and finally, we point out some critical scenarios that existing trust models cannot handle, together with some possible solutions., This work was supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crowdsensing in Smart Cities: Overview, Platforms, and Environment Sensing Issues

  • Alvear-Alvear, Óscar
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Evidence shows that Smart Cities are starting to materialise in our lives through the gradual introduction of the Internet of Things (IoT) paradigm. In this scope, crowdsensing emerges as a powerful solution to address environmental monitoring, allowing to control air pollution levels in crowded urban areas in a distributed, collaborative, inexpensive and accurate manner. However, even though technology is already available, such environmental sensing devices have not yet reached consumers. In this paper, we present an analysis of candidate technologies for crowdsensing architectures, along with the requirements for empowering users with air monitoring capabilities. Specifically, we start by providing an overview of the most relevant IoT architectures and protocols. Then, we present the general design of an off-the-shelf mobile environmental sensor able to cope with air quality monitoring requirements; we explore different hardware options to develop the desired sensing unit using readily available devices, discussing the main technical issues associated with each option, thereby opening new opportunities in terms of environmental monitoring programs., This work was partially supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, the Generalitat Valenciana, Spain, the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion del Ecuador (SENESCYT), and the Universidad de Cuenca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Friendly-Sharing: Improving the Performance of City Sensoring through Contact-Based Messaging Applications

  • HERRERA-TAPIA, JORGE
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tomás Domínguez, Andrés Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Regular citizens equipped with smart devices are being increasingly used as sensors by Smart Cities applications. Using contacts among users, data in the form of messages is obtained and shared. Contact-based messaging applications are based on establishing a short-range communication directly between mobile devices, and on storing the messages in these devices for subsequent delivery to cloud-based services. An effective way to increase the number of messages that can be shared is to increase the contact duration. We thus introduce the Friendly-Sharing diffusion approach, where, during a contact, the users are aware of the time needed to interchange the messages stored in their buffers, and they can thus decide to wait more time in order to increase the message sharing probability. The performance of this approach is anyway closely related to the size of the buffer in the device. We therefore compare various policies either for the message selection at forwarding times and for message dropping when the buffer is full. We evaluate our proposal with a modified version of the Opportunistic Networking Environment (ONE) simulator and using real human mobility traces., This work was partially supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, the Generalitat Valenciana, Spain, under Grant AICO/2015/108, the Universidad Laica Eloy Alfaro de Manabi, Ecuador, and SENESCYT, Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Traffic management as a service: the traffic flow pattern classification problem

  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Soler Fernández, David
[EN] Intelligent Transportation System (ITS) technologies can be implemented to reduce both fuel consumption and the associated emission of greenhouse gases. However, such systems require intelligent and effective route planning solutions to reduce travel time and promote stable traveling speeds. To achieve such goal these systems should account for both estimated and real-time traffic congestion states, but obtaining reliable traffic congestion estimations for all the streets/avenues in a city for the different times of the day, for every day in a year, is a complex task. Modeling such a tremendous amount of data can be time-consuming and, additionally, centralized computation of optimal routes based on such time-dependencies has very high data processing requirements. In this paper we approach this problem through a heuristic to considerably reduce the modeling effort while maintaining the benefits of time-dependent traffic congestion modeling. In particular, we propose grouping streets by taking into account real traces describing the daily traffic pattern. The effectiveness of this heuristic is assessed for the city of Valencia, Spain, and the results obtained show that it is possible to reduce the required number of daily traffic flow patterns by a factor of 4210 while maintaining the essence of time-dependent modeling requirements., This work was partially supported by Valencia's Traffic Management Department and by the "Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014," Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using UAV-Based Systems to Monitor Air Pollution in Areas with Poor Accessibility

  • Alvear-Alvear, Óscar
  • Zema, Nicola Roberto
  • Natalizio, Enrico
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Air pollution monitoring has recently become an issue of utmost importance in our society. Despite the fact that crowdsensing approaches could be an adequate solution for urban areas, they cannot be implemented in rural environments. Instead, deploying a fleet of UAVs could be considered an acceptable alternative. Embracing this approach, this paper proposes the use of UAVs equipped with off-the-shelf sensors to perform air pollution monitoring tasks. These UAVs are guided by our proposed Pollution-driven UAV Control (PdUC) algorithm, which is based on a chemotaxis metaheuristic and a local particle swarm optimization strategy. Together, they allow automatically performing the monitoring of a specified area using UAVs. Experimental results show that, when using PdUC, an implicit priority guides the construction of pollution maps by focusing on areas where the pollutants' concentration is higher. This way, accurate maps can be constructed in a faster manner when compared to other strategies. The PdUC scheme is compared against various standard mobility models through simulation, showing that it achieves better performance. In particular, it is able to find the most polluted areas with more accuracy and provides a higher coverage within the time bounds defined by the UAV flight time., This work has been partially carried out in the framework of the DIVINA Challenge Team, which is funded under the Labex MS2T program. Labex MS2T is supported by the French Government, through the program "Investments for the Future" managed by the National Agency for Research (Reference: ANR-11-IDEX-0004-02). This work was also supported by the "Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a Retos de la Sociedad, Proyecto I+D+I TEC2014-52690-R," the "Programa de Becas SENESCYT de la Republica del Ecuador," and the Research Direction of University of Cuenca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Demo: Video-Based Overtaking Assistance Now A Reality

  • PATRA, SUBHADEEP
  • Tornell, Sergio M.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
ITS solutions suffer from the slow pace of adoption by manufacturers despite the interest shown by both consumers and industry. Our goal is to develop ITS applications using already available technologies to make them affordable, quick to deploy, and easy to adopt. In this paper we introduce an ITS system for overtaking assistance that provides drivers with a real-time video feed from the vehicle located just in front. This provides a better view of the road ahead, and of any vehicles travelling in the opposite direction, being especially useful when the front view of the driver is blocked by large vehicles., This work was partially supported by the European Commission under Svägata.eu, the Erasmus Mundus Programme, Action 2 (EMA2) and the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grants TEC2014-52690-R and BES-2012-052673.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

T-VNets: a novel Trust architecture for Vehicular Networks using the standardized messaging services of ETSI ITS

  • Kerrache, Chaker Abdelaziz
  • Lagraa, Nasreddine
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
In this paper we propose a novel trust establishment architecture fully compliant with the ETSI ITS standard which takes advantage of the periodically exchanged beacons (i.e. CAM) and event triggered messages (i.e. DENM). Our solution, called T-VNets, allows estimating the traffic density, the trust among entities, as well as the dishonest nodes distribution within the network. In addition, by combining different trust metrics such as direct, indirect, event-based and RSU-based trust, T-VNets is able to eliminate dishonest nodes from all network operations while selecting the best paths to deliver legal data messages by taking advantage of the link duration concept. Since our solution is able to adapt to environments with or without roadside units (RSUs), it can perform adequately both in urban and highway scenarios. Simulation results evidence that our proposal is more efficient than other existing solutions, being able to sustain performance levels even in worst-case scenarios. © 2016 Published by Elsevier B.V, This work was partially supported by both the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, and the Ministere de l'enseignement superieur et de la recherche scientifique, Programme National Exceptionnel P.N.E 2015/2016, Algeria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GRC-Sensing: An Architecture to Measure Acoustic Pollution Based on Crowdsensing

  • Zamora-Mero, Willian Jesus
  • Vera, Elsa
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Noise pollution is an emerging and challenging problem of all large metropolitan areas, affecting the health of citizens in multiple ways. Therefore, obtaining a detailed and real-time map of noise in cities becomes of the utmost importance for authorities to take preventive measures. Until now, these measurements were limited to occasional sampling made by specialized companies, that mainly focus on major roads. In this paper, we propose an alternative approach to this problem based on crowdsensing. Our proposed architecture empowers participating citizens by allowing them to seamlessly, and based on their context, sample the noise in their surrounding environment. This allows us to provide a global and detailed view of noise levels around the city, including places traditionally not monitored due to poor accessibility, even while using their vehicles. In the paper, we detail how the different relevant issues in our architecture, i.e., smartphone calibration, measurement adequacy, server design, and client¿server interaction, were solved, and we have validated them in real scenarios to illustrate the potential of the solution achieved., This work was partially supported by Valencia's Traffic Management Department, by the "Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I + D + I 2014", Spain, under Grant TEC2014-52690-R, and the "Universidad Laica Eloy Alfaro de Manabi, and the Programa de Becas SENESCYT" de la Republica del Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Handling Mobility in IoT applications based on the MQTT protocol

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Perez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Connectivity clearly plays an important role in Internet of Things (loT) solutions, and the efficient handling of mobility is crucial for the overall performance of loT applications. Currently, the most widely adopted protocols for loT and Machine to Machine (M2M) environments, namely MQTT, CoAP or LWM2M, are directly dependent on the TCP/IP protocol suite. This suite is highly reliable when using wired networks, but it is not the best solution in the presence of intermittent connections. In this work we provide a solution to improve MQTT with an emphasis on mobile scenarios. The advantage of the solution we propose is making the system more immune to changes in the point of attachment of mobile devices. This way we avoid loT service developers having to explicitly consider this issue. Moreover, our solution does not need extra support from the network through protocols like MobilelP or LISP. The obtained results show that our proposal, based on intermediate buffering, guarantees that there is no information loss during hand-off periods due to node mobility; furthermore, based on discrete event simulation results, we determine the maximum number of sources and the required amount of buffers for a mobile node., This work was partially supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Analytical Model Based on Population Processes to Characterize Data Dissemination in 5G Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
[EN] The scarcity of bandwidth due to the explosive growth of mobile devices in 5G makes the offloading messaging workload to Wi-Fi devices that use opportunistic connections, a very promising solution. Communications in mobile opportunistic networks take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we propose an analytical model based on population processes to evaluate data dissemination considering several parameters, such as user density, contact rate, and the number of fixed nodes. From this model, we obtain closed-form expressions for determining the diffusion time, the network coverage, and the waiting time. Newer 5G wireless technologies, such as WiGig, can offer multi-gigabit speeds, low latency, and security-protected connectivity between nearby devices. We therefore focus our work on the impact of high-speed and short-range wireless communications technologies for data dissemination in mobile opportunistic networks. Moreover, we test whether the coexistence with a fixed infrastructure can improve content dissemination, and thus justify its additional cost. Our results show that, when user density is high, the diffusion is mainly performed through the opportunistic contacts between mobile nodes, and that the diffusion coverage is close to 100%. Moreover, the diffusion is fast enough to dynamically update the information among all the participating members, so users do not need to get closer to fixed spots for receiving updated information., This work was supported in part by the Ministerio de Economa y Competitividad, Spain, under Grant TEC2014-52690-R, Grant MTM 2016-75963-P, and Grant SEV-2013-0323, in part by Generalitat Valenciana, Spain, under Grant AICO/2015/108 and Grant ACOMP/2015/005.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards Realistic Urban Traffic Experiments Using DFROUTER: Heuristic, Validation and Extensions

  • Zambrano-Martinez, Jorge
  • Soler Fernández, David
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Traffic congestion is an important problem faced by Intelligent Transportation Systems (ITS), requiring models that allow predicting the impact of different solutions on urban traffic flow. Such an approach typically requires the use of simulations, which should be as realistic as possible. However, achieving high degrees of realism can be complex when the actual traffic patterns, defined through an Origin/Destination (O-D) matrix for the vehicles in a city, remain unknown. Thus, the main contribution of this paper is a heuristic for improving traffic congestion modeling. In particular, we propose a procedure that, starting from real induction loop measurements made available by traffic authorities, iteratively refines the output of DFROUTER, which is a module provided by the SUMO (Simulation of Urban MObility) tool. This way, it is able to generate an O-D matrix for traffic that resembles the real traffic distribution and that can be directly imported by SUMO. We apply our technique to the city of Valencia, and we then compare the obtained results against other existing traffic mobility data for the cities of Cologne (Germany) and Bologna (Italy), thereby validating our approach. We also use our technique to determine what degree of congestion is expectable if certain conditions cause additional traffic to circulate in the city, adopting both a uniform pattern and a hotspot-based pattern for traffic injection to demonstrate how to regulate the overall number of vehicles in the city. This study allows evaluating the impact of vehicle flow changes on the overall traffic congestion levels., This work was partially supported by Valencia’s Traffic Management Department and by the “Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014”, Spain, under Grant TEC2014-52690-R, and the “Programa de Becas SENESCYT”de la República del Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mobile Pollution Data Sensing Using UAVs

  • Alvear, Oscar
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Nowadays, the impact of global warming is causing societies to become more aware and responsive to environmental problems. As a result, pollution sensing is gaining more relevance. In order to have a strict control over air quality, the use of mobile sensors is becoming a promising alternative to traditional air quality stations. Mobile sensors allow to easily perform measurements in many different places, thereby offering substantial improvements in terms of the spatial granularity of the data gathered. Pollution monitoring near large industrial areas or in rural areas where transportation facilities are poor or inexistent can complicate the mobile sensing approach. To address this problem, in this paper we propose endowing Unmanned Aerial Vehicles (UAVs) with pollution sensors, allowing them to become autonomous air monitoring stations. The proposed solution has the potential to quickly cover a target region at a low cost, and providing great flexibility., This work was partially supported by the “Ministerio de Economia y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014,” Spain, under Grant TEC2014-52690-R, and by the Generalitat Valenciana, Spain (Grant AICO/2015/113).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Location-Aware Waypoint-Based Routing Protocol for Airborne DTNs in Search and Rescue Scenarios

  • Bujari, Armir
  • Palazzi, Claudio
  • Ronzani, Daniele
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In this paper, we propose GeoSaW, a delay-tolerant routing protocol for Airborne Networks in Search and Rescue scenarios. The protocol exploits the geographical information of UAVs to make appropriate message forwarding decisions. More precisely, the information about the future UAV's motion path is exploited to select the best UAV carrying the message towards the destination. Simulation results show that the proposed solution outperforms the classic DTN routing protocols in terms of several performance metrics.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving MQTT Data Delivery in Mobile Scenarios:Results from a Realistic Testbed

  • Luzuriaga-Quichimbo, Jorge Eloy
  • Perez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
MQTT is being widely used for data delivery in IoT applications but its architecture does not properly handle mobility when disconnection periods tend to be large. In this paper we describe an experimental evaluation, made in a real environment, of a solution that guarantees that there is no information loss when variable length hand-offs appear due to the movement of a node. Our proposal modifies the classical publish/subscribe scheme by introducing an intermediate buffer that takes care of message transfer. Finally, we study the impact related to the connectivity of mobile devices of the use of the standard Linux Network Manager. We propose a cross-layer solution that improves the device connectivity in conjunction with the data layer management. We show that our solution improves the data delivery guaranteeing that no information is lost., This work was partially supported by Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Adaptive Anycasting Solution for Crowd Sensing in Vehicular Environments

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Vehicular networks can be seen as the new key enablers of the future networked society. Vehicles traveling can act as mobile sensors and collect a variety of information that can be used to enable various new services such as environment monitoring, traffic management, urban surveillance, and so on. In this paper, we present “adaptive Anycasting solution for Vehicular Environments” (AVE), which is a message delivery protocol that combines geographical and topological information to dynamically adapt its behavior to network conditions. We focus on vehicle-to-infrastructure connectivity for cloud services, where the vehicles send the sensed information as individual and independent messages to a cloud service in the Internet. This scenario requires access to any available close-by roadside unit, thus making anycasting the ideal delivery mechanism. Simulations results show that the hybrid and adaptive approach of AVE is able to improve network performance. For example, regarding delivery ratio, AVE outperforms DYMO by 10% in sparse scenarios and outperforms delay-tolerant networking techniques by 10% in dense scenarios., This work was supported in part by the Ministerio de Economa y Competitividad, Programa Estatal de Investigacin, Desarrollo e Innovacin Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R and in part by the Ministerio de Educacion, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simplifying the in-vehicle connectivity for ITS applications

  • Tornell, Sergio M.
  • Kärkkäinen, Teemu
  • Ott, Jörg
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In-vehicle connectivity has experienced a big expansion in recent years; car manufacturers are very active in this sense, and are proposing OBU oriented solutions. This effort is justified by the user demands for always-on connectivity. However, currently available OBUs do not provide the desired flexibility and simplicity of use that would be desirable for ITS applications. For example, none of them considers the possibility for inter-vehicle device-to-device communications. In this paper we present GRCBox, an architecture that extends the in-vehicle connectivity by providing inter and invehicular communication support. By creating private vehicular networks, GRCBox allows user devices’ applications to perform direct peer-to-peer communication. In this paper we describe the GRCBox design along with four case studies. We also include the experimental results obtained from a test-bed to show that our solution does not have a negative impact on the performance when compared to a centralized solution., This work was partially supported by the Ministerio de Econom´ıa y Competitividad, Programa Estatal de Investigaci´on, Desarrollo e Innovaci´on Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, BES-2012-052673 and EEBB-I-14-07890.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Correlation Between Heart Rate and Driving Style in Real Driving Scenarios

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Driving safety is of utmost importance in our society. The number of fatalities due to car accidents is still very high, and reducing this trend requires as much attention as possible. There are situations where the emotional conditions of drivers vary due to reasons beyond their control, or because they decide to change their driving style. Hence, we consider that such frequent situations deserve more scrutiny. In this work we addressed such issues by designing an Android application able to monitor in real-time both physiological data from the driver and diagnostic data from the vehicle (this data is obtained using an OBD-II connector) to study their correlation. Among the various non-invasive biomedical sensors available nowadays, we have adopted heart rate sensors, either packaged in belts or in smart watches. This allows studying the relationship between driving aggressiveness and heart rate. For our analysis we focused on fourteen different routes accounting a total driving time of 6 hours and 2 minutes, which we have split into three separate categories: urban, suburban, and highway routes. We analyzed the correlation between the heart rate and the driving style for each of the three groups. Our experiments show that the differences in terms of heart rate between quiet and aggressive behavior range between 2.5 % and 3 % beats per minute higher for the latter behaviour compared to the former., This work was partially supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Survey on Smartphone-Based Crowdsensing Solutions

  • Zamora-Mero, Willian Jesus
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In recent years, the widespread adoption of mobile phones, combined with the ever-increasing number of sensors that smartphones are equipped with, greatly simplified the generalized adoption of crowdsensing solutions by reducing hardware requirements and costs to a minimum. These factors have led to an outstanding growth of crowdsensing proposals from both academia and industry. In this paper, we provide a survey of smartphone-based crowdsensing solutions that have emerged in the past few years, focusing on 64 works published in top-ranked journals and conferences. To properly analyze these previous works, we first define a reference framework based on how we classify the different proposals under study. The results of our survey evidence that there is still much heterogeneity in terms of technologies adopted and deployment approaches, although modular designs at both client and server elements seem to be dominant. Also, the preferred client platform is Android, while server platforms are typically web-based, and client-server communications mostly rely on XML or JSON over HTTP. The main detected pitfall concerns the performance evaluation of the different proposals, which typically fail to make a scalability analysis despite being critical issue when targeting very large communities of users., This work was partially supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, the "Universidad Laica Eloy Alfaro de Manabi-ULEAM," and the "Programa de Becas SENESCYT de la Republica del Ecuador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empirical Study and Modeling of Vehicular Communications at Intersections in the 5 GHz Band

  • Hadiwardoyo, Seilendria Ardityarama
  • Tomás Domínguez, Andrés Enrique
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Event warnings are critical in the context of ITS, being dependent on reliable and low-delay delivery ofmessages to nearby vehicles. One of the main challenges to address in this context is intersection management. Since buildings will severely hinder signals in the 5GHz band, it becomes necessary to transmit at the exact moment a vehicle is at the center of an intersection to maximize delivery chances. However, GPS inaccuracy, among other problems, complicates the achievement of this goal. In this paper we study this problem by first analyzing different intersection types, studying the vehicular communications performance in each type of intersection through real scenario experiments. Obtained results show that intersection-related communications depend on the distances to the intersection and line-of-sight (LOS) conditions. Also, depending on the physical characteristics of intersections, the presented blockages introduce different degrees of hampering to message delivery. Based on the modeling of the different intersection types, we then study the expected success ratio when notifying events at intersections. In general, we find that effective propagation of messages at intersections is possible, even in urban canyons and despite GPS errors, as long as rooftop antennas are used to compensate for poor communication conditions., This work was partially supported by the “Ministerio de Economía y Competividad, Programa Estatal de Investigación, Desarollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014,” Spain, under Grants TEC2014-52690-R and BES-2015-075988.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A density-based contention window control scheme for unicast communications in vehicular ad hoc networks

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Achieving a well-designed medium access control (MAC) protocol is a challenging issue to improve communications efficiency due to the dynamic nature of vehicular ad hoc networks (VANETs). IEEE 802.11p standard was selected as the best choice for vehicular environments considering its availability, maturity, and cost. The common problem in all IEEE 802.11 based protocols is scalability, exhibiting performance degradation in highly variable network scenarios. Experimental results for the IEEE 802.11-based MAC protocol show the importance of contention window adjustment on communications performance; However the vehicular communications community has not yet addressed this issue in unicast communication environments. This paper proposes a novel contention window control scheme for VANET environments based on estimating the network density, which is then used to dynamically adapt the CW size. Analysis and simulation results showthat our proposal provides better overall performance compared with previous proposals, even in high network density scenarios., This work was supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ArduSim: Accurate and real-time multicopter simulation

  • Fabra Collado, Francisco Jose
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] As the popularity and the number of Unmanned Aerial Vehicles (UAVs) increases, new protocols are needed to coordinate UAVs when flying autonomously, and to avoid that these UAVs collide with each other. Directly testing such novel protocols on real UAVs is a complex procedure that requires investing much time, money and research effort. Hence, it becomes necessary to have the possibility to first test different solutions using simulation. Unfortunately, existing tools present significant limitations: some of them only simulate accurately the flight behavior of one UAV, while some other simulators can manage several UAVs simultaneously, but not in real-time, thus loosing accuracy regarding the mobility pattern of the UAV. In this work we address such problem by introducing ArduSim, a novel simulator that allows controlling in soft real-time the flight and communications of multiple UAVs, being the developed protocols directly portable to real devices. The contributions of this work include: (i) the ArduSim simulation platform, which allows realistic simulation and control of multiple UAVs simultaneously, offering functionalities not provided by existing alternatives; (ii) a model for the WiFi communications link between UAVs, based on real experiments, and that is integrated into ArduSim itself; and (iii) a thorough study of the scalability performance of our simulator., This work was supported by the Ministerio de Economia y Competitividad for the "Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a Retos de la Sociedad, Proyecto I+D+I SMART@CARPHONE: Integracion del smartphone y el vehiculo para conectar conductores, sensores y entorno a traves de una arquitectura de servicios funcionales" (grant number TEC2014-52690-R), and the Universitat Politecnica de Valencia (UPV) under program "Contratos Pre-doctorales para la Formacion de Personal Investigador (FPI)" (grant number 0060100000).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DrivingStyles: A Mobile Platform for Driving Styles and Fuel Consumption Characterization

  • Meseguer Anastasio, Javier Enrique
  • Toh, Chai Keong
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Intelligent transportation systems (ITS) rely on connected vehicle applications to address real-world problems. Research is currently being conducted to support safety, mobility and environmental applications. This paper presents the DrivingStyles architecture, which adopts data mining techniques and neural networks to analyze and generate a classification of driving styles and fuel consumption based on driver characterization. In particular, we have implemented an algorithm that is able to characterize the degree of aggressiveness of each driver. We have also developed a methodology to calculate, in real-time, the consumption and environmental impact of spark ignition and diesel vehicles from a set of variables obtained from the vehicle's electronic control unit (ECU). In this paper, we demonstrate the impact of the driving style on fuel consumption, as well as its correlation with the greenhouse gas emissions generated by each vehicle. Overall, our platform is able to assist drivers in correcting their bad driving habits, while offering helpful tips to improve fuel economy and driving safety., This work was partially supported by the Ministerio de Economía y Competitividad, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensing raffic density combining V2V and V2I wireless communications

  • Sanguesa, Julio A.
  • Barrachina, Javier
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Wireless technologies are making the development of new applications and services in vehicular environments possible since they enable mobile communication between vehicles (V2V), as well as communication between vehicles and infrastructure nodes (V2I). Usually, V2V communications are dedicated to the transmission of small messages mainly focused on improving traffic safety. Instead, V2I communications allow users to access the Internet and benefit from higher level applications. The combination of both V2V and V2I, known as V2X communications, can increase the benefits even further, thereby making intelligent transportation systems (ITS) a reality. In this paper, we introduce V2X-d, a novel architecture specially designed to estimate traffic density on the road. In particular, V2X-d exploits the combination of V2V and V2I communications. Our approach is based on the information gathered by sensors (i.e., vehicles and road side units (RSUs)) and the characteristics of the roadmap topology to accurately make an estimation of the instant vehicle density. The combination of both mechanisms improves the accuracy and coverage area of the data gathered, while increasing the robustness and fault tolerance of the overall approach, e.g., using the information offered by V2V communications to provide additional density information in areas where RSUs are scarce or malfunctioning. By using our collaborative sensing scheme, future ITS solutions will be able to establish adequate dissemination protocols or to apply more efficient traffic congestion reduction policies, since they will be aware of the instantaneous density of vehicles., This work was supported by the Ministerio de Economia y Competitividad, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2014, Spain, under Grant TEC2014-52690-R, and by the Government of Aragon and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical evaluation of the performance of contact-based messaging applications

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Murillo Arcila, Marina
Communications in mobile opportunistic networks, instead of using the Internet infrastructure, take place upon the establishment of ephemeral contacts among mobile nodes using direct communication. In this paper, we analytically model the performance of mobile opportunistic networks for contact-based messaging applications in city squares or gathering points, a key challenging topic that is required for the effective design of novel services. We take into account several social aspects such as: the density of people, the dynamic of people arriving and leaving a place, the size of the messages and the duration of the contacts. We base our models on Population Processes, an approach commonly used to represent the dynamics of biological populations. We study their stable equilibrium points and obtain analytical expressions for their resolution. The evaluations performed show that these models can reproduce the dynamics of message diffusion applications. We demonstrate that when the density of people increases, the effectiveness of the diffusion is improved. Regarding the arrival and departure of people, their impact is more relevant when the density of people is low. Finally, we prove that for large message sizes the effectiveness of the epidemic diffusion is reduced, and novel diffusion protocols should be considered. © 2016 Elsevier B.V. All rights reserved., This work was partially supported by Ministerio de Economia y Competitividad, Spain (Grants TEC2014-52690-R & MTM2013-47093-P & SEV-2013-0323), Generalitat Valenciana, Spain (Grants AICO/2015/108 & ACOMP/2015/005) and by the Basque Government through the BERC 2014-2017 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Architecture Offering Mobile Pollution Sensing with High Spatial Resolution

  • Alvear-Alvear, Óscar
  • Zamora-Mero, Willian Jesus
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Mobile sensing is becoming the best option to monitor our environment due to its ease of use, high flexibility, and low price. In this paper, we present a mobile sensing architecture able to monitor different pollutants using low-end sensors. Although the proposed solution can be deployed everywhere, it becomes especially meaningful in crowded cities where pollution values are often high, being of great concern to both population and authorities. Our architecture is composed of three different modules: a mobile sensor for monitoring environment pollutants, an Android-based device for transferring the gathered data to a central server, and a central processing server for analyzing the pollution distribution. Moreover, we analyze different issues related to the monitoring process: (i) filtering captured data to reduce the variability of consecutive measurements; (ii) converting the sensor output to actual pollution levels; (iii) reducing the temporal variations produced by mobile sensing process; and (iv) applying interpolation techniques for creating detailed pollution maps. In addition, we study the best strategy to use mobile sensors by first determining the influence of sensor orientation on the captured values and then analyzing the influence of time and space sampling in the interpolation process., This work was partially supported by the "Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a Retos de la Sociedad, Proyecto I+D+I TEC2014-52690-R," the "Universidad Laica Eloy Alfaro de Manabi," and the "Programa de Becas SENESCYT de la Republica del Ecuador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the Impact of Data Transfer Time in Contact-Based Messaging Applications

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
  • HERRERA TAPIA, JORGE
In this letter, we propose an analytical model based on delay differential equations (DDEs) to evaluate the diffusion of messages in groups taking into account the transmission time of themessages. This model was validated through simulation studies using the ONE simulator. Evaluation results show that, considering the impact of data transfer time is of utmost importance, as when message size increases (for example, when transmitting short videos), the diffusion is bounded by this transmission time, and the result is that the diffusion time increases slightly when the number of nodes increases (as opposed to the always decreasing diffusion time of the epidemic diffusion with no delay)., This work was supported in part by Ministerio de Economia y Competitividad, Spain (Grant TEC2014-52690-R). The associate editor coordinating the review of this paper and approving it for publication was I.-R. Chen.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sensing traffic density combining V2V and V2I Wireless Communications

  • Sanguesa, J.A.
  • Barrachina, J.
  • Fogue, M.
  • Garrido, P.
  • Martinez, F.J.
  • Cano, J.C
  • Calafate, C.T.
  • Manzoni, P.
Wireless technologies are making the development of new applications and services in vehicular environments possible since they enable mobile communication between vehicles (V2V), as well as communication between vehicles and infrastructure nodes (V2I). Usually, V2V communications are dedicated to the transmission of small messages mainly focused on improving traffic safety. Instead, V2I communications allow users to access the Internet and benefit from higher level applications. The combination of both V2V and V2I, known as V2X communications, can increase the benefits even further, thereby making intelligent transportation systems (ITS) a reality. In this paper, we introduce V2X-d, a novel architecture specially designed to estimate traffic density on the road. In particular, V2X-d exploits the combination of V2V and V2I communications. Our approach is based on the information gathered by sensors (i.e., vehicles and road side units (RSUs)) and the characteristics of the roadmap topology to accurately make an estimation of the instant vehicle density. The combination of both mechanisms improves the accuracy and coverage area of the data gathered, while increasing the robustness and fault tolerance of the overall approach, e.g., using the information offered by V2V communications to provide additional density information in areas where RSUs are scarce or malfunctioning. By using our collaborative sensing scheme, future ITS solutions will be able to establish adequate dissemination protocols or to apply more efficient traffic congestion reduction policies, since they will be aware of the instantaneous density of vehicles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the Study of Vehicle Density in Intelligent Transportation Systems

  • Sanguesa, J.A.
  • Naranjo, F.
  • Torres-Sanz, V.
  • Fogue, M.
  • Garrido, P.
  • Martinez, F.J.
Vehicular ad hoc networks (VANETs) are wireless communication networks which support cooperative driving among vehicles on the road. The specific characteristics of VANETs favor the development of attractive and challenging services and applications which rely on message exchanging among vehicles. These communication capabilities depend directly on the existence of nearby vehicles able to exchange information. Therefore, higher vehicle densities favor the communication among vehicles. However, vehicular communications are also strongly affected by the topology of the map (i.e., wireless signal could be attenuated due to the distance between the sender and receiver, and obstacles usually block signal transmission). In this paper, we study the influence of the roadmap topology and the number of vehicles when accounting for the vehicular communications capabilities, especially in urban scenarios. Additionally, we consider the use of two parameters: the SJ Ratio (SJR) and the Total Distance (TD), as the topology-related factors that better correlate with communications performance. Finally, we propose the use of a new density metric based on the number of vehicles, the complexity of the roadmap, and its maximum capacity. Hence, researchers will be able to accurately characterize the different urban scenarios and better validate their proposals related to cooperative Intelligent Transportation Systems based on vehicular communications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Smart tourist information points by combining agents, semantics and AI techniques

  • Garrido, P.
  • Barrachina, J.
  • Martinez, F.J.
  • Seron, F.J.
The tourism sector in the province of Teruel (Aragon, Spain) is increasing rapidly. Although the number of domestic and foreign tourists is continuously growing, there are some tourist attractions spread over a wide geographical area, which are only visited by a few people at specific times of the year. Additionally, having human tourist guides everywhere and speaking different languages is unfeasible. An integrated solution based on smart and interactive Embodied Conversational Agents (ECAs) tourist guides combined with ontologies would overcome this problem. This paper presents a smart tourist information points approach which gathers tourism information about Teruel, structured according to a novel lightweight ontology built on OWL (Ontology Web Language), known as TITERIA (Touristic Information of TEruel for Intelligent Agents). Our proposal, which combines TITERIA with the Maxine platform, is capable of responding appropriately to the users thanks to its Artificial Intelligence Modeling Language (AIML) database and the AI techniques added to Maxine. Preliminary results indicate that our prototype is able to inform users about interesting topics, as well as to propose other related information, allowing them to acquire a complete information about any issue. Furthermore, users can directly talk with an artificial actor making communication much more natural and closer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Non-emergency patient transport services planning through genetic algorithms

  • Fogue, Manuel
  • Sanguesa, Julio A.
  • Naranjo, Fernando
  • Gallardo, Jesús
  • Garrido, Piedad
  • Martinez, Francisco J.
Non-emergency Patient Transport Services (PTS) are provided by ambulance companies for patients who do not require urgent and emergency transport. These patients require transport to or from a health facility like a hospital, but due to clinical requirements are unable to use private or public transport. This task is performed nowadays mainly by human operators, spending a high amount of time and resources to obtain solutions that are suboptimal in most cases. To overcome this limitation, in this paper we present NURA (Non-Urgent transport Routing Algorithm), a novel algorithm aimed at ambulance route planning. In particular, NURA relies on a genetic algorithm to explore the solution space, and it includes a scheduling algorithm to generate detailed routes for ambulances. Experimental results show that NURA is able to outperform human experts in several real scenarios, reducing the time spent by patients in ambulances during non-emergency transportations, increasing ambulance usage, while saving time and money for ambulance companies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improving Roadside Unit deployment in vehicular networks by exploiting genetic algorithms

  • Fogue, M.
  • Sanguesa, J.A.
  • Martinez, F.J.
  • Marquez-Barja, J.M.
Vehicular networks make use of the Roadside Units (RSUs) to enhance the communication capabilities of the vehicles in order to forward control messages and/or to provide Internet access to vehicles, drivers and passengers. Unfortunately, within vehicular networks, the wireless signal propagation is mostly affected by buildings and other obstacles (e.g., urban fixtures), in particular when considering the IEEE 802.11p standard. Therefore, a crowded RSU deployment may be required to ensure vehicular communications within urban environments. Furthermore, some applications, notably those applications related to safety, require a fast and reliable warning data transmission to the emergency services and traffic authorities. However, communication is not always possible in vehicular environments due to the lack of connectivity even employing multiple hops. To overcome the signal propagation problem and delayed warning notification time issues, an effective, smart, cost-effective and all-purpose RSU deployment policy should be put into place. In this paper, we propose the genetic algorithm for roadside unit deployment (GARSUD) system, which uses a genetic algorithm that is capable of automatically providing an RSU deployment suitable for any given road map layout. Our simulation results show that GARSUD is able to reduce the warning notification time (the time required to inform emergency authorities in traffic danger situations) and to improve vehicular communication capabilities within different density scenarios and complexity layouts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

A Survey and Comparative Study of Broadcast Warning Message Dissemination Schemes for VANETs

  • Sanguesa, J.A.
  • Fogue, M.
  • Garrido, P.
  • Martinez, F.J.
  • Cano, J.C.
  • Calafate, C.T.
Vehicle-to-vehicle (V2V) communications also known as vehicular ad hoc networks (VANETs) allow vehicles to cooperate to increase driving efficiency and safety on the roads. In particular, they are forecasted as one of the key technologies to increase traffic safety by providing useful traffic services. In this scope, vehicle-to-vehicle dissemination of warning messages to alert nearby vehicles is one of the most significant and representative solutions. The main goal of the different dissemination strategies available is to reduce the message delivery latency of such information while ensuring the correct reception of warning messages in the vehicle''s neighborhood as soon as a dangerous situation occurs. Despite the fact that several dissemination schemes have been proposed so far, their evaluation has been done under different conditions, using different simulators, making it difficult to determine the optimal dissemination scheme for each particular scenario. In this paper, besides reviewing the most relevant broadcast dissemination schemes available in the recent literature, we also provide a fair comparative analysis by evaluating them under the same environmental conditions, focusing on the same metrics, and using the same simulation platform. Overall, we provide researchers with a clear guideline of the benefits and drawbacks associated with each scheme.