Pasar al contenido principal

SOLUCIONES PARA UNA GESTION EFICIENTE DEL TRAFICO VEHICULAR BASADAS EN SISTEMAS Y SERVICIOS EN RED

RTI2018-096384-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 67
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-Constrained and Edge-Enabled Selection of UAV Participants in Federated Learning Process

  • Dahmane, Sofiane
  • Yagoubi, Mohamed Bachir
  • Brik, Bouziane
  • Kerrache, Chaker Abdelaziz
  • Lorenz, Pascal
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Unmanned aerial vehicles (UAVs) have gained increasing attention in boosting the performance of conventional networks due to their small size, high efficiency, low cost, and autonomously nature. The amalgamation of UAVs with both distributed/collaborative Deep Learning (DL) algorithms, such as Federated Learning (FL), and Blockchain technology have ushered in a new paradigm of Secure Multi-Access Edge Computing (S-MEC). Indeed, FL enables UAV devices to leverage their sensed data to build local DL models. The latter are then sent to a central node, e.g., S-MEC node, for aggregation, in order to generate a global DL model. Therefore, FL enables UAV devices to collaborate during several FL rounds in generating a learning model, while avoiding to share their local data, and thus ensuring UAVs' privacy. However, UAV devices are usually limited in terms of resources such as battery, memory, and CPU. Some of the UAV devices may not be able to build a local learning models due to their resources capacity. Hence, there is a great need to select the adequate UAVs at each FL round, that are able to build a local DL model based on their resource capacities. In this paper, we design a novel and S-MEC-enabled framework that optimizes the selection of UAV participants at each FL training round, named FedSel. FedSel considers the available UAVs along with their resource capacities, in terms of energy, CPU, and memory, to determine which UAV device is able to participant in the FL process. Thus, we formulate the UAV selection problem as an Integer Linear Program, which considers the aforementioned constraints. We also prove that this problem is NP-hard, and suggest a Tabu Search (TS) metaheuristic-based approach to resolve it. Moreover, FedSel is built on top of blockchain technology, in order to ensure a secure selection of UAV participants, and hence building reliable FL-based models. Simulation results validate the efficiency of our FedSel scheme in balancing computational load among available UAVs and optimizing the UAV selection process., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards a Sustainable City for Cyclists: Promoting Safety through a Mobile Sensing Application

  • Boronat, Pablo
  • Pérez-Francisco, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Riding a bicycle is a great manner to contribute to the preservation of our ecosystem. Cycling helps to reduce air pollution and traffic congestion, and so, it is one of the simplest ways to lower the environmental footprint of people. However, the cohabitation of cars and vulnerable road users, such as bikes, scooters, or pedestrians, is prone to cause accidents with serious consequences. In this context, technological solutions are sought that enable the generation of alerts to prevent these accidents, thereby promoting a safer city for these road users, and a cleaner environment. Alert systems based on smartphones can alleviate these situations since nearly all people carry such a device while traveling. In this work, we test the suitability of a smartphone based alert system, determining the most adequate communications architecture. Two protocols have been designed to send position and alert messages to/from a centralized server over 4G cellular networks. One of the protocols is implemented using a REST architecture on top of the HTTP protocol, and the other one is implemented over the UDP protocol. We show that the proposed alarm system is feasible regarding communication response time, and we conclude that the application should be implemented over the UDP protocol, as response times are about three times better than for the REST implementation. We tested the applications in real deployments, finding that drivers are warned of the presence of bicycles when closer than 150 m, having enough time to pay attention to the situation and drive more carefully to avoid a collision., This work was partially supported by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018", Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Data Transmissions using Hub Nodes in Vehicular Social Networks

  • Vegni, Anna Maria
  • Souza, Camilo
  • Loscrí, Valeria
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Vehicular Social Networks (VSNs) consist of groups of individuals (i.e., people) who may share common interests, preferences and needs in the context of temporal spatial proximity on roads. In this environment, the impact of human social factors, such as mobility, willingness to cooperate and personal preferences, on vehicular connectivity is taken under consideration, thus extending the concept of Vehicular Ad-hoc Networks. In VSNs, vehicles are classified based on their social degree, a vehicle considered to be a ¿social¿ one if it accesses the vehicular social network and posts messages with a frequency higher than a given threshold. Therefore, to speed up the data dissemination process within a vehicular social network, a packet should be forwarded to those vehicles showing high social activity. In a previous paper, we introduced a new probabilistic-based broadcasting scheme called SCARF (SoCial-Aware Reliable Forwarding Technique for Vehicular Communications), and we analytically demonstrated its effectiveness in packet transmission reduction while guaranteeing network dissemination. In this paper, we assess SCARF in more realistic scenarios with real traffic traces, and we compare it with other similar techniques. We show that SCARF outperforms other approaches in terms of delivery ratio, while guaranteeing acceptable time delay values and average number of forwardings.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D Simulation Modeling of UAV-to-Car Communications

  • HADIWARDOYO, SEILENDRIA ARDITYARAMA
  • Ji, Yusheng
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In this paper, we propose a realistic model for simulating communications between unmanned aerial vehicles (UAVs), or drones, and ground vehicles, which can support mobile infrastructure to broadcast alerts in emergency situations. Three-dimensional positioning features should be considered in these simulations that involve UAVs and ground vehicles since communications links are not based on a flat surface. In fact, irregular terrains in the form of hills and mountains can greatly affect the communications by acting as obstacles that block radio signals partially or totally. Hence, in this paper, we propose a simulation model that conforms to this kind of communication and that was developed in the scope of the OMNeT++ simulator. The simulation results achieved showed a great degree of similarities with those results obtained in a real testbed for different scenarios. In addition, various path loss models and elevation models were considered to improve the level of realism of the simulation model., This work was supported in part by the Japan Society for the Promotion of Science KAKENHI under Grant JP16H02817 and Grant JP18KK0279, in part by the International Internship Program of the National Institute of Informatics, Japan, and in part by the Ministerio de Economía y Competividad, Programa Estatal de Investigación, Desarollo e Innovación Orientada a los Retos de la Sociedad, Proyectos ICDCI 2014, Government of Spain, under Grant TEC2014-52690-R and Grant BES-2015-075988.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Communication Technologies Enabling Effective UAV Networks: A Standards Perspective

  • Vegni, Anna Maria
  • Loscri, Valeria
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Recent developments in the unmanned aerial vehicles (UAVs) field have made evident the need for a standardization process of the communication technologies supporting direct information exchange, thus enabling UAV-to-UAV networking. We consider this is necessary to achieve all sorts of cooperative tasks requiring real-time (or near-real-time) synchronization, including swarm formation and collision avoidance. In this article, we therefore argue in favor of introducing a new standard that would address this specific area, highlighting why current technologies are not adequate, what the different steps toward rapid standardization are, and which lessons have been learned from related fields, namely the vehicular and robotic environments, in the past few years., This work is derived from R&D project RTI2018-096384-B-I00 funded by MCIN/ AEI/10.13039/501100011033 and ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Roadside Unit Deployment in Internet of Vehicles Systems: A Survey

  • Guerna, Abderrahim
  • Bitam, Salim
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] In recent years, the network technology known as Internet of Vehicles (IoV) has been developed to improve road safety and vehicle security, with the goal of servicing the digital demands of car drivers and passengers. However, the highly dynamical network topology that characterizes these networks, and which often leads to discontinuous transmissions, is one of the most significant challenges of IoV. To address this issue, IoV infrastructure-based components known as roadside units (RSU) are designed to play a critical role by providing continuous transmission coverage and permanent connectivity. However, the main challenges that arise when deploying RSUs are balancing IoVs' performances and total cost so that optimal vehicle service coverage is provided with respect to some target Quality of Service (QoS) such as: service coverage, throughput, low latency, or energy consumption. This paper provides an in-depth survey of RSU deployment in IoV networks, discussing recent research trends in this field, and summarizing of a number of previous papers on the subject. Furthermore, we highlight that two classes of RSU deployment can be found in the literature-static and dynamic-the latter being based on vehicle mobility. A comparison between the existing RSU deployment schemes proposed in existing literature, as well as the various networking metrics, are presented and discussed. Our comparative study confirms that the performance of the different RSU placement solutions heavily depends on several factors such as road shape, particularity of road segments (like accident-prone ones), wireless access methods, mobility model, and vehicles' distribution over time and space. Besides that, we review the most important RSU placement approaches, highlighting their strengths and limitations. Finally, this survey concludes by presenting some future research directions in this domain., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Safe and Efficient Take-Off of VTOL UAV Swarms

  • Sastre, Carles
  • Wubben, Jamie
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Currently multicopters are facing a continuous growth in terms of recreational uses, and multiple companies focused on these aircrafts to facilitate certain tasks that were nearly inaccessible to humans, or otherwise involved a great cost. In this context, the drone swarm concept allows us to broaden and incorporate new, more refined applications in which various aircraft coordinate with each other to carry out large-scale tasks. When the number of UAVs involved becomes too high, guaranteeing that the take-off procedure is efficient and yet secure becomes quite complex. Hence, in this paper we propose and validate different algorithms to optimize the take-off time of drones belonging to a swarm, with the objective that there are no collisions between them. In particular, we propose algorithms for both trajectory analysis and batch generation for take-off. Based on a large number of experiments using the ArduSim simulator we prove that the proposed algorithms provide a robust solution within a reasonable time frame when testing with different aerial formations. In addition, we will assess how different UAV position assignment strategies impact our algorithm performance in terms of take-off time and number of batches required., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fog Computing in IoT Smart Environments via Named Data Networking: A Study on Service Orchestration Mechanisms

  • Amadeo, Marica
  • Ruggeri, Giuseppe
  • Campolo, Claudia
  • Molinaro, Antonella
  • Loscri, Valeria
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] By offering low-latency and context-aware services, fog computing will have a peculiar role in the deployment of Internet of Things (IoT) applications for smart environments. Unlike the conventional remote cloud, for which consolidated architectures and deployment options exist, many design and implementation aspects remain open when considering the latest fog computing paradigm. In this paper, we focus on the problems of dynamically discovering the processing and storage resources distributed among fog nodes and, accordingly, orchestrating them for the provisioning of IoT services for smart environments. In particular, we show how these functionalities can be effectively supported by the revolutionary Named Data Networking (NDN) paradigm. Originally conceived to support named content delivery, NDN can be extended to request and provide named computation services, with NDN nodes acting as both content routers and in-network service executors. To substantiate our analysis, we present an NDN fog computing framework with focus on a smart campus scenario, where the execution of IoT services is dynamically orchestrated and performed by NDN nodes in a distributed fashion. A simulation campaign in ndnSIM, the reference network simulator of the NDN research community, is also presented to assess the performance of our proposal against state-of-the-art solutions. Results confirm the superiority of the proposal in terms of service provisioning time, paid at the expenses of a slightly higher amount of traffic exchanged among fog nodes., This research was partially funded by the Italian Government under grant PON ARS01_00836 for the COGITO (A COGnItive dynamic sysTem to allOw buildings to learn and adapt) PON Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human Mobility Prediction with Region-based Flows and Water Consumption

  • Terroso-Sáenz, Fernando
  • Muñoz, Andrés
  • Fernández-Pedauyé, Julio José
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] We are witnessing an increasing need to accurately measure people's mobility as it has become an instrumental factor for the development of innovative services in multiple domains. In this context, several ICT solutions have relied on location-based technologies such as GPS, WiFi or Bluetooth to track individual's movements. However, these technologies are limited by the privacy restrictions of data providers. In this paper we propose a methodology to robustly predict citizens' mobility patterns based on heterogeneous data from different sources. Particularly, our methodology focuses on a human mobility predictor based on a low-resolution mobility dataset and the use of water consumption data as a facilitator of this prediction task. As a result, this work explores whether the water consumption within a geographical region can reveal human activity patterns relevant from the point of view of the mobility mining discipline. This approach has been tested in a residential area near Madrid (Spain) obtaining quite promising results., This work was supported in part by the Spanish Ministry of Science and Innovation, through the Ramon y Cajal Program under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, and Grant RTC-2017-6389-5; in part by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and in part by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020," Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the Cognitive Processes in a Virtual Classroom: A Multi-objective Integer Linear Programming Approach

  • Nolé-Fajardo, Maria Luisa|||0000-0001-9476-9387
  • Llinares Millán, María Del Carmen|||0000-0003-2270-807X
  • Soler Fernández, David
  • Higuera-Trujillo, Juan Luis
[EN] A fundamental problem in the design of a classroom is to identify what characteristics it should have in order to optimize learning. This is a complex problem because learning is a construct related to several cognitive processes. The aim of this study is to maximize learning, represented by the processes of attention, memory, and preference, depending on six classroom parameters: height, width, color hue, color saturation, color temperature, and illuminance. Multi-objective integer linear programming with three objective functions and 56 binary variables was used to solve this optimization problem. Virtual reality tools were used to gather the data; novel software was used to create variations of virtual classrooms for a sample of 112 students. Using an interactive method, more than 4700 integer linear programming problems were optimally solved to obtain 13 efficient solutions to the multi-objective problem, which allowed the decision maker to analyze all the information and make a final choice. The results showed that achieving the best cognitive processing performance involves using different classroom configurations. The use of a multi-objective interactive approach is interesting because in human behavioral studies, it is important to consider the judgement of an expert in order to make decisions., This research was funded by Grant BIA2017-86157-R, funded by MCIN/AEI/10.13039/501100011033, and by ERDF-"A way of making Europe" and also derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe". The first author is supported by the Spanish Ministry of Universities (FPU19/03531). The third author (postdoctoral fellow ¿Margarita Salas¿) is supported by funding from the Spanish Ministry of Universities and by the European Union NextGenerationEU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WATERSensing: A Smart Warning System for Natural Disasters in Spain

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Periñán-Pascual, Carlos|||0000-0002-6483-4712
  • Arcas-Túnez, Francisco
  • Muñoz-Ortega, Andrés
[EN] Floods are expected to increase in the coming years due to global warming. The early identification of water-based disasters can be lifesaving, and the challenge is to identify appropriate and timely warning measures. Social-media tools such as Twitter provide citizens with a real-time communication channel for reporting problems related to our environment, which allows humans to act as social sensors. In this article, we show the main results and lessons learned from the research project WATERoT, funded by the Spanish government. In this project, we designed a social sensing application (called WATERSensing) for the prevention and evaluation of water-related disasters with the participation of individuals through social networks. This tool crawls microtexts from different social networks such as Twitter, RSS feeds, or Telegram, which are analyzed with natural language processing techniques. A case study of Storm Gloria, a Mediterranean storm that heavily affected eastern Spain in January 2020, is presented to evidence that the system can correlate data from social media with actual events. We demonstrate that the analysis of different sources of information opens up new opportunities in the development of warning systems for the prevention, early identification, and management of natural disasters., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, Grant RTC-2017-6389-5, and Grant RTC2019007159-5; in part by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18; and in part by the European Union's Horizon 2020 Research and Innovation Programme under Grant 101017861.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobile crowdsensing approaches to address the COVID-19 pandemic in Spain

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Mobile crowdsensing (MCS) is a technique where people with computing and sensing devices such as smartphones collectively share data that are of potential interest to the rest of society. MCS includes two different trends (i) mobile sensing, which shares raw data generated from the sensors that are embedded in mobile devices, and (ii) social sensing, which uses the information shared by people in online social networks (OSNs). In this study, the authors present the timeline evolution of the COVID¿19 pandemic in Spain, and summarise the MCS research efforts that are being undertaken by the Spanish community to address COVID¿19 outbreak. Indeed, the COVID¿19 pandemic is putting today's society at risk; lockdown and social distancing measures proposed by governments are dramatically affecting economies. In this regard, MCS tools can become a powerful solution to provide smart quarantine strategies in periods of a steep decrease of infections, or new outbreaks., This work was partially supported by the Fundación Séneca del Centro de Coordinación de la Investigación de la Región de Murcia under Project 20813/PI/18, and by the Spanish Ministry of Science, Innovation and Universities under grants RTI2018-096384-B-I00 and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Clustering Algorithms on GPU-Based Edge Computing Platforms

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Morales-García, Juan
  • Llanes, Antonio
  • Imbernón, Baldomero
[EN] Internet of Things (IoT) is becoming a new socioeconomic revolution in which data and immediacy are the main ingredients. IoT generates large datasets on a daily basis but it is currently considered as "dark data", i.e., data generated but never analyzed. The efficient analysis of this data is mandatory to create intelligent applications for the next generation of IoT applications that benefits society. Artificial Intelligence (AI) techniques are very well suited to identifying hidden patterns and correlations in this data deluge. In particular, clustering algorithms are of the utmost importance for performing exploratory data analysis to identify a set (a.k.a., cluster) of similar objects. Clustering algorithms are computationally heavy workloads and require to be executed on high-performance computing clusters, especially to deal with large datasets. This execution on HPC infrastructures is an energy hungry procedure with additional issues, such as high-latency communications or privacy. Edge computing is a paradigm to enable light-weight computations at the edge of the network that has been proposed recently to solve these issues. In this paper, we provide an in-depth analysis of emergent edge computing architectures that include low-power Graphics Processing Units (GPUs) to speed-up these workloads. Our analysis includes performance and power consumption figures of the latest Nvidia's AGX Xavier to compare the energy-performance ratio of these low-cost platforms with a high-performance cloud-based counterpart version. Three different clustering algorithms (i.e., k-means, Fuzzy Minimals (FM), and Fuzzy C-Means (FCM)) are designed to be optimally executed on edge and cloud platforms, showing a speed-up factor of up to 11x for the GPU code compared to sequential counterpart versions in the edge platforms and energy savings of up to 150% between the edge computing and HPC platforms., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5 and by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimising message broadcasting in opportunistic networks

  • Chancay-García, Leonardo
  • Vegni, Anna Maria
  • Loscrí, Valeria
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Message Broadcasting in Opportunistic Networks is based on the opportunity of establishing contacts among mobiles nodes for message exchange. Nevertheless, as the amount of information transmitted in a contact is limited by the transmission speed and the contact duration, large messages are less likely to be exchanged, and thus their diffusion is severely limited. Furthermore, these failed transmissions can also lead to an important waste of network resources, since the message transmission is aborted when the contact ends and the message needs to be transmitted again in the next contact. Therefore, in this paper we study the impact that contact duration has on the broadcast of messages, showing that splitting a large message into smaller parts can improve its diffusion. Based on this idea, we propose an extension of the epidemic protocol called Xpread. The efficiency of this protocol mainly depends on how the original message is partitioned. Thus, in order to evaluate the impact and the efficiency of the partition scheme, we have developed an analytical model based on Population Processes, showing that a fixed size partition is the best option, while also providing a simple expression to obtain the optimal size. The Xpread has been evaluated exhaustively using four different mobiles traces, comprising both pedestrian and vehicular scenarios. The results show that the diffusion of large messages is improved up to four times with a slight reduction in the delivery time and overhead, minimising also message forwarding failures., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under Grant RTI2018-096384-B-I00; and the Secretaria Nacional de Educacion Superior, Ciencia, Tecnologia e Innovacion del Ecuador (SENESCYT), Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuel savings on missed approach through aircraft reinjection

  • Carmona, María
  • Casado González, Rafael
  • Bermúdez, Aurelio
  • Pérez-Francisco, Miguel
  • Boronat-Perez, Pablo
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] PurposeIn the aerial transportation area, fuel costs are critical to the economic viability of companies, and so urgent measures should be adopted to avoid any unnecessary increase in operational costs. In particular, this paper addresses the case of missed approach manouevres, showing that it is still possible to optimize the usual procedure.Design/methodology/approachThe costs involved in a standard procedure following a missed approach are analysed through a simulation model, and they are compared with the improvements achieved with a fast reinjection scheme proposed in a prior work.FindingsExperimental results show that, for a standard A320 aircraft, fuel savings ranging from 55% to 90% can be achieved through the reinjection method.Originality/valueTo the best of the authors' knowledge, this work is the first study in the literature addressing the fuel savings benefits obtained by applying a reinjection technique for missed approach manoeuvres., This work is derived from R&D projects RTI2018-098156-B-C52 and RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", by the Junta de Comunidades de Castilla-La Mancha under grant SBPLY/19/180501/000159, and by the Universidad de Castilla-La Mancha under grant 2021-GRIN-31042.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Adding voice messages to a low-cost long-range data messaging system

  • Nakamura, Kiyoshy
  • Zennaro, Marco
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Remote locations in rural areas can benefit from any system that would provide some form of connectivity. In a previous work we described a low cost architecture that, thanks to the use of the LoRa technology, allowed long links using low energy and a cheap infrastructure. In this work we extend those results by adding the possibility to include generic external sources of data using an MQTT based interface. More specifically, we describe a voice messaging system that allows users that cannot read or write to send voice based messages. We describe how the system was integrated into the existing platform and present so me performance results. We consider that these results are promising and provide a tool that can offer a useful service at a low cost., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impacts of swat weather generator statistics from high-resolution datasets on monthly streamflow simulation over Peninsular Spain

  • Senent-Aparicio, Javier
  • Jimeno-Sáez, Patricia
  • López-Ballesteros, Adrián
  • Ginés Giménez, José
  • Pérez-Sánchez, Julio
  • Srinivasan, Raghavan
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Study region: Peninsular Spain. Study focus: Weather data are the key drivers of hydrological modelling. However, available weather data can present gaps in data sequences and are often limited in their spatial coverage for use in such hydrological models as the Soil and Water Assessment Tool (SWAT). To overcome this limitation, SWAT includes a weather generator algorithm that can complete this data based on long-term weather statistics. This work presents a newly developed weather statistics dataset for Peninsular Spain (PSWG), calculated from national gridded datasets according to the SWAT model format. PSWG provides a higher resolution that stands as a compelling alternative to the statistics calculated from the Climate Forecast System Reanalysis (CFSR) that are available on the SWAT website. New hydrological insights for the region: The dataset has been evaluated using PSWG and CFSR datasets for different data availability scenarios to reconstruct weather series in three watersheds with contrasting weather climates. Results underscore the superiority of the PSWG dataset in reconstructing missing data for hydrological simulations. This approach provides a strong alternative for SWAT applications in Peninsular Spain and the applied methodology can be replicated in other countries that dispose of high-resolution gridded rainfall and temperature datasets., This research was funded by the Ministry of Science, Innovation and Universities of Spain under grants RTC-2017-6389-5 and RTI2018096384BI00. This work has also received funding from the European Union's Horizon 2020 research and innovation programme within the framework of the project SMARTLAGOON under grant agreement No. 101017861. Adrian Lopez Ballesteros was sponsored by the Ministry of Science, Innovation and Universities of Spain under an FPU grant (FPU17/00923) and Jose M. Cecilia under the Ramon y Cajal Program (Grant No. RYC2018025580I) . The authors would like to acknowledge AEMET for the precipitation and air temperature data provided for this work (AEMET grid dataset can be found at http:// www.aemet.es/es/serviciosclimaticos/cambio_climat) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A LoRa-based protocol for connecting IoT edge computing nodes to provide small-data-based services

  • Nakamura, Kiyoshy
  • Redondi, Alessandro
  • Longo, Edoardo
  • Zennaro, Marco
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Data is becoming increasingly personal. Individuals regularly interact with a variety of structured data, ranging from SQLite databases on the phone to personal sensors and open government data. The ¿digital traces left by individuals through these interactions¿ are sometimes referred to as ¿small data¿. Examples of ¿small data¿ include driving records, biometric measurements, search histories, weather forecasts and usage alerts. In this paper, we present a flexible protocol called LoRaCTP, which is based on LoRa technology that allows data ¿chunks¿ to be transferred over large distances with very low energy expenditure. LoRaCTP provides all the mechanisms necessary to make LoRa transfer reliable by introducing a lightweight connection setup and allowing the ideal sending of an as-long-as necessary data message. We designed this protocol as communication support for small-data edge-based IoT solutions, given its stability, low power usage, and the possibility to cover long distances. We evaluated our protocol using various data content sizes and communication distances to demonstrate its performance and reliability., This work was partially supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital", Proyectos AICO/2020, Spain, under Grant AICO/2020/302 and "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos IDI 2018", Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving UAV Mission Quality and Safety through Topographic Awareness

  • Wubben, Jamie
  • Morales, Christian
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The field of Unmanned Aerial Vehicles (UAVs) has progressed greatly in the last years. UAVs are now used for many applications and are often flown automatically. One commonly implemented feature in an automatic flight is that of following a mission at a stable altitude. However, this altitude is almost always referenced from the take-off location and does not take terrain profile levels into account. This is a critical and dangerous issue because if the terrain level changes abruptly (e.g., mountain regions or buildings in a city), this can lead to crashes or an unintended (illegal) high altitude. Our aim for this work is to provide a solution such that a constant altitude above ground level is maintained. To this end, we make use of the readily available Digital Elevation Models (DEMs). These models, which contain the terrain elevation, help us in dynamically adjusting the VTOL UAV altitude so that it remains nearly constant in relation to the ground. Results have shown that with the use of our method, the altitude can be maintained sufficiently constant while introducing a limited increase in flight time and battery consumption that is proportional to the terrain's irregularity. In a moderately changing terrain, the error could be reduced to just +/- 5 m., This work is derived from R&D projects RTI2018-096384-B-I00 and RTC2019-007159-5, funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF) "A Way of Making Europe", and by the Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020, Spain, under the Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-throughput fuzzy clustering on heterogeneous architectures

  • Cebrian, Juan M.
  • Imbernón, Baldomero
  • Soto, Jesús
  • García, José M.
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The Internet of Things (IoT) is pushing the next economic revolution in which the main players are data and immediacy. IoT is increasingly producing large amounts of data that are now classified as "dark data'' because most are created but never analyzed. The efficient analysis of this data deluge is becoming mandatory in order to transform it into meaningful information. Among the techniques available for this purpose, clustering techniques, which classify different patterns into groups, have proven to be very useful for obtaining knowledge from the data. However, clustering algorithms are computationally hard, especially when it comes to large data sets and, therefore, they require the most powerful computing platforms on the market. In this paper, we investigate coarse and fine grain parallelization strategies in Intel and Nvidia architectures of fuzzy minimals (FM) algorithm; a fuzzy clustering technique that has shown very good results in the literature. We provide an in-depth performance analysis of the FM's main bottlenecks, reporting a speed-up factor of up to 40x compared to the sequential counterpart version., This work was partially supported by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by Spanish Ministry of Science, Innovation and Universities under grants TIN2016-78799-P (AEI/FEDER, UE), RTI2018-096384-B-I00, RTI2018-098156-B-C53 and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mitigating Electromagnetic Noise When Using Low-Cost Devices in Industry 4.0

  • Herrero, Ángel C.
  • Sangüesa, Julio A.
  • Martínez, Francisco J.
  • Garrido, Piedad
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Transitioning toward Industry 4.0 requires major investment in devices and mechanisms enabling interconnectivity between people, machines, and processes. In this article, we present a low-cost system based on the Raspberry Pi platform to measure the overall equipment effectiveness (OEE) in real time, and we propose two filtering mechanisms for electromagnetic interferences (EMIs) to measure OEE accurately. The first EMI filtering mechanism is the database filter (DBF), which has been designed to record sealing signals accurately. The DBF works on the database by filtering erroneous signals that have been inserted in it. The second mechanism is the smart coded filter (SCF), which is used to filter erroneous signals associated with machine availability measurements. We have validated our proposal in several production lines in a food industry. The results show that our system works properly, and that it considerably reduces implementation costs compared with proprietary systems offering similar functions. After implementing the proposed system in actual industrial settings, the results show a mean error (ME) of -0.43% and a root mean square error (RMSE) of 4.85 in the sealing signals, and an error of 0% in the availability signal, thus enabling an accurate estimate of OEE., This work was supported in part by the Government of Aragon and the European Social Fund "Construyendo Europa desde Aragon" under Grant T40_20D Research Group, and in part by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018," Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Leveraging a Publish/Subscribe Fog System to Provide Collision Warnings in Vehicular Networks

  • Patra, Subhadeep
  • Zamora-Mero, Willian Jesus
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Fog computing, an extension of the Cloud Computing paradigm where routers themselves may provide the virtualisation infrastructure, aims at achieving fluidity when distributing in-network functions, in addition to allowing fast and scalable processing, and exchange of information. In this paper we present a fog computing architecture based on a content island which interconnects sets of things to exchange and process data among themselves or with other content islands. We then present a use case that focuses on a smartphone-based forward collision warning application for a connected vehicle scenario. This application makes use of the optical sensor of smartphones to estimate the distance between the device itself and other vehicles in its field of view. The vehicle travelling directly ahead is identified relying on the information from the GPS, camera, and inter-island communication. Warnings are generated at both content islands, if the driver does not maintain a predefined safe distance towards the vehicle ahead. Experiments performed with the application show that with the developed method, we are able to estimate the distance between vehicles, and the inter-island communication has a very low overhead, resulting in improved performance. On comparing our proposed solution based on edge/fog computing with a cloud-based api, it was observed that our solution outperformed the cloud-based api, thus making us optimistic of the utility of the proposed architecture, This work was partially funding by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018 , Spain, under Grant RTI2018-096384-B-I00
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

COVIDSensing: Social Sensing strategy for the management of the COVID-19 crisis

  • Sepúlveda, Alicia
  • Muñoz, Andrés
  • Martínez-España, Raquel
  • Periñán-Pascual, Carlos|||0000-0002-6483-4712
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The management of the COVID-19 pandemic has been shown to be critical for reducing its dramatic effects. Social sensing can analyse user-contributed data posted daily in social-media services, where participants are seen as Social Sensors. Individually, social sensors may provide noisy information. However, collectively, such opinion holders constitute a large critical mass dispersed everywhere and with an immediate capacity for information transfer. The main goal of this article is to present a novel methodological tool based on social sensing, called COVIDSensing. In particular, this application serves to provide actionable information in real time for the management of the socio-economic and health crisis caused by COVID-19. This tool dynamically identifies socio-economic problems of general interest through the analysis of people¿s opinions on social networks. Moreover, it tracks and predicts the evolution of the COVID-19 pandemic based on epidemiological figures together with the social perceptions towards the disease. This article presents the case study of Spain to illustrate the tool., This work is derived from R&D project RTI2018-096384-B-I00, as well as the Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, by the Spanish Agencia Estatal de Investigación (grant number PID2020- 112827GB-I00/ AEI/10.13039/501100011033), and by the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Proyectos AICO/2020, Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling the Trade-Off between Resource Efficiency and User Satisfaction in NDNs Based on Naïve Bayes Data Classification and Lagrange Method

  • Herouala, Abdelkader Tayeb
  • Kerrache, Chaker Abdelaziz
  • Ziani, Benameur
  • Lagraa, Nasreddine
  • Tahari, Abdou El Karim
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] This paper addresses the fundamental problem of the trade-off between resource efficiency and user satisfaction in the limited environments of Named Data Networks (NDNs). The proposed strategy is named RADC (Resource Allocation based Data Classification), which aims at managing such trade-off by controlling the system's fairness index. To this end, a machine learning technique based on Multinomial Naive Bayes is used to classify the received contents. Then, an adaptive resource allocation strategy based on the Lagrange utility function is proposed. To cache the received content, an adequate content placement and a replacement mechanism are enforced. Simulation at the system level shows that this strategy could be a powerful tool for administrators to manage the trade-off between efficiency and user satisfaction., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact Assessment of Gridded Precipitation Products on Streamflow Simulations over a Poorly Gauged Basin in El Salvador

  • Jimeno-Sáez, Patricia
  • Blanco-Gómez, Pablo
  • Pérez-Sánchez, Julio
  • Senent-Aparicio, Javier
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] In this study, five open access gridded precipitation (GP) products (CFSR, MSWEPv1.1, PERSIANN-CDR, CMORPH, and CHIRPSv2.0) and local climate data were evaluated over the Grande de San Miguel (GSM) River Basin in El Salvador. The main purpose was to identify optional data sources of precipitation for hydrological modelling given that ground-based precipitation gauges in El Salvador are scarce and their data includes important temporal and spatial gaps. Firstly, a direct comparison was made between the precipitation data from the five GP products and from the rain gauges. Secondly, the SWAT model was used to simulate the streamflow regimen based on the precipitation datasets. The analysis of results showed that the models produced correct predictions, and the accuracy increased as models were calibrated to each specific precipitation product. Overall, PERSIANN-CDR produced the best simulation results, including streamflow predictions in the GSM basin, and outperformed other GP products and also the results obtained from data precipitation gauges. The findings of this research support the hydrological modelling based on open-access GP products, particularly when the data from precipitation gauges are scarce and poor., This research was funded by Ministerio de Ciencia e Innovacion of Espana (grant numbers RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5) and by Ramon y Cajal Program (grant number RYC2018-025580-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Clustering Algorithms on HPC Platforms

  • Cebrian, Juan M.
  • Imbernón, Baldomero
  • Soto, Jesús
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Clustering algorithms are one of the most widely used kernels to generate knowledge from large datasets. These algorithms group a set of data elements (i.e., images, points, patterns, etc.) into clusters to identify patterns or common features of a sample. However, these algorithms are very computationally expensive as they often involve the computation of expensive fitness functions that must be evaluated for all points in the dataset. This computational cost is even higher for fuzzy methods, where each data point may belong to more than one cluster. In this paper, we evaluate different parallelisation strategies on different heterogeneous platforms for fuzzy clustering algorithms typically used in the state-of-the-art such as the Fuzzy C-means (FCM), the Gustafson-Kessel FCM (GK-FCM) and the Fuzzy Minimals (FM). The experimental evaluation includes performance and energy trade-offs. Our results show that depending on the computational pattern of each algorithm, their mathematical foundation and the amount of data to be processed, each algorithm performs better on a different platform., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and by the Spanish "Agencia Estatal de Investigacion" under grant PID2020-112827GB-I00 /AEI/ 10.13039/501100011033, and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic system supporting multicopter swarms with manual guidance

  • Fabra Collado, Francisco José
  • Zamora, Willian
  • Masanet, Joan
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Currently, there are some scenarios, such as search and rescue operations,where the deployment of manually guided swarms of UAVs can be necessary. In such cases, the pilot's commands are unknown a priori (unpredictable), meaning that the UAVs must respond in near real time to the movements of the leader UAV in order to maintain swarm consistency. In this paper we develop a protocol for the coordination of UAVs in a swarm where the swarm leader is controlled by a real pilot, and the other UAVs must follow it in real time to maintain swarm cohesion. We validate our solution using a realistic simulation software that we developed (ArduSim), testing flights with multiple numbers of UAVs and different swarm configurations. Simulation results show the validity of the proposed swarm coordination protocol, detailing the responsiveness limits of our solution, and finding the minimum distances between UAVs to avoid collisions., This work was partially supported by the "Programa Estatal de Investigation, Desarrollo e Innovation Orientada a Retos de la Sociedad, Proyecto TEC2014-52690-R", Spain, the "Universidad Laica Eloy Alfaro de Manabi," and the "Programa de Becas SENESCYT de la Republica del Ecuador."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate Landing of Unmanned Aerial Vehicles Using Ground Pattern Recognition

  • Wubben, Jamie
  • FABRA COLLADO, FRANCISCO JOSE
  • Krzeszowski, Tomasz
  • Márquez Barja, Johann Marcelo
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Over the last few years, several researchers have been developing protocols and applications in order to autonomously land unmanned aerial vehicles (UAVs). However, most of the proposed protocols rely on expensive equipment or do not satisfy the high precision needs of some UAV applications such as package retrieval and delivery or the compact landing of UAV swarms. Therefore, in this work, a solution for high precision landing based on the use of ArUco markers is presented. In the proposed solution, a UAV equipped with a low-cost camera is able to detect ArUco markers sized 56×56 cm from an altitude of up to 30 m. Once the marker is detected, the UAV changes its flight behavior in order to land on the exact position where the marker is located. The proposal was evaluated and validated using both the ArduSim simulation platform and real UAV flights. The results show an average offset of only 11 cm from the target position, which vastly improves the landing accuracy compared to the traditional GPS-based landing, which typically deviates from the intended target by 1 to 3 m., This work was funded by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018 , Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the performance of NRENs in deploying IoT in Africa: the case for TTN

  • Zennaro, Marco
  • Pelsser, Cristel
  • Albinet, Franck
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The growth of the Internet worldwide has been fuelled by the development of the National Research and Education Networks (NRENs), i.e., networks of academic and educational institutions. In Africa the establishment of NRENs is more recent. In this paper we analyse the readiness of African NRENs to be part of The Things Network (TTN), a network of IoT gateways that has fostered the growth of IoT in Europe by adopting a community network model. We analyse RTT and packet loss toward the nearest TTN network server, in African countries where RIPE Atlas (RIPE - Réseaux IP Européens, French for ¿European IP Networks) probes are hosted both in academic and commercial networks. Our conclusion is that NRENs and commercial ISPs are on an equal foot in hosting TTN gateways in most countries we considered., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A UAV-Based Content Delivery Architecture for Rural Areas and Future Smart Cities

  • Ortiz-Mayordomo, Sergio
  • Toh, C.K.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Content delivery in vehicular environments can serve multiple purposes, such as safety, entertainment, and news delivery that can be geographically relevant to vehicles traveling within a certain area. The traditional approach to address this problem, based on fixed networking infrastructure, suffers from the following two drawbacks: First, the efficient delivery of large-sized contents to multiple moving receivers simultaneously can be hard to achieve, and second, most of the roads outside the main urban areas lack such fixed infrastructures due to economic reasons. In this paper, we tackle both these issues by proposing rapidly deployable wireless access infrastructures combining RaptorQ-protected content diffusion and unmanned aerial vehicles (UAVs). We performed experiments using actual vehicles and UAVs, and our results showed that RaptorQ-based content dissemination mechanisms is highly efficient when transmitting to multiple moving receivers simultaneously, and UAVs can serve as cheap, effective, and rapidly deployable mobile wireless access elements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flood Detection Using Real-Time Image Segmentation from Unmanned Aerial Vehicles on Edge-Computing Platform

  • Hernandez, Daniel
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] With the proliferation of unmanned aerial vehicles (UAVs) in different contexts and application areas, efforts are being made to endow these devices with enough intelligence so as to allow them to perform complex tasks with full autonomy. In particular, covering scenarios such as disaster areas may become particularly difficult due to infrastructure shortage in some areas, often impeding a cloud-based analysis of the data in near-real time. Enabling AI techniques at the edge is therefore fundamental so that UAVs themselves can both capture and process information to gain an understanding of their context, and determine the appropriate course of action in an independent manner. Towards this goal, in this paper, we take determined steps towards UAV autonomy in a disaster scenario such as a flood. In particular, we use a dataset of UAV images relative to different floods taking place in Spain, and then use an AI-based approach that relies on three widely used deep neural networks (DNNs) for semantic segmentation of images, to automatically determine the regions more affected by rains (flooded areas). The targeted algorithms are optimized for GPU-based edge computing platforms, so that the classification can be carried out on the UAVs themselves, and only the algorithm output is uploaded to the cloud for real-time tracking of the flooded areas. This way, we are able to reduce dependency on infrastructure, and to reduce network resource consumption, making the overall process greener and more robust to connection disruptions. Experimental results using different types of hardware and different architectures show that it is feasible to perform advanced real-time processing of UAV images using sophisticated DNN-based solutions., This work is derived from R&D projects RTI2018-096384-B-I00 and RTC2019-007159-5, as well as the Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/10.13039/501100011033, "FSE invest in your future" and "ERDF A way of making Europe", and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Minimizing Dependency Ratio in Spain through Demographic Variables

  • Micó, Joan C.|||0000-0001-7120-5458
  • Soler Fernández, David
  • Sanz, María T.
  • Caselles, Antonio
  • Amigó, Salvador
[EN] The population pyramids in Europe have changed in the last decades, particularly in Spain, where population aging is observed and implies an increase in the dependency ratio. The present study aims to modify a mathematical model of population defined by age and sex based on the von Foerster-Mckendrick equations in order to have birth and migration rates as control variables. To achieve this objective, the necessary mathematical changes are made in the model, and the new mathematical model is verified and validated for the case of Spain, in the period 2008-2019, being considered successful both in its deterministic and stochastic formulation. Finally, through the method of strategies and scenarios and a genetic algorithm, a modification of the population pyramid is obtained in the direction of a decrease in the dependency ratio, increasing the birth rate and immigration and decreasing the emigration rate. These changes lead to a modification of the population pyramid in the year 2040; in particular, an increase of the female population in the age range from 20 to 39 years old., This research was partially funded by R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Distributed Approach for Collision Avoidance between Multirotor UAVs Following Planned Missions

  • FABRA COLLADO, FRANCISCO JOSE
  • Zamora-Mero, Willian Jesus
  • Sangüesa-Escorihuela, Julio Alberto
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] As the number of potential applications for Unmanned Aerial Vehicles (UAVs) keeps rising steadily, the chances that these devices get close to each other during their flights also increases, causing concerns regarding potential collisions. This paper proposed the Mission Based Collision Avoidance Protocol (MBCAP), a novel UAV collision avoidance protocol applicable to all types of multicopters flying autonomously. It relies on wireless communications in order to detect nearby UAVs, and to negotiate the procedure to avoid any potential collision. Experimental and simulation results demonstrated the validity and effectiveness of the proposed solution, which typically introduces a small overhead in the range of 15 to 42 s for each risky situation successfully handled., This work was partially supported by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018", Spain, under Grant RTI2018-096384-B-I00, and the Universitat Politecnica de Valencia (UPV) under grant number FPI-2017-S1 for the training of PhD researchers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Decision Support System for Water Optimization in Anti-Frost Techniques by Sprinklers

  • Guillén-Navarro, Miguel A.
  • Martínez-España, Raquel
  • Bueno-Crespo, Andrés
  • Morales-García, Juan
  • Ayuso, Belén
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Precision agriculture is a growing sector that improves traditional agricultural processes through the use of new technologies. In southeast Spain, farmers are continuously fighting against harsh conditions caused by the effects of climate change. Among these problems, the great variability of temperatures (up to 20 degrees C in the same day) stands out. This causes the stone fruit trees to flower prematurely and the low winter temperatures freeze the flower causing the loss of the crop. Farmers use anti-freeze techniques to prevent crop loss and the most widely used techniques are those that use water irrigation as they are cheaper than other techniques. However, these techniques waste too much water and it is a scarce resource, especially in this area. In this article, we propose a novel intelligent Internet of Things (IoT) monitoring system to optimize the use of water in these anti-frost techniques while minimizing crop loss. The intelligent component of the IoT system is designed using an approach based on a multivariate Long Short-Term Memory (LSTM) model, designed to predict low temperatures. We compare the proposed approach of multivariate model with the univariate counterpart version to figure out which model obtains better accuracy to predict low temperatures. An accurate prediction of low temperatures would translate into significant water savings, as anti-frost techniques would not be activated without being necessary. Our experimental results show that the proposed multivariate LSTM approach improves the univariate counterpart version, obtaining an average quadratic error no greater than 0.65 degrees C and a coefficient of determination R2 greater than 0.97. The proposed system has been deployed and is currently operating in a real environment obtained satisfactory performance., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Integrating an MQTT Proxy in a LoRa-Based Messaging System for Generic Sensor Data Collection

  • Nakamura, Kiyoshy
  • Zennaro, Marco
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] In this paper we use a frugal innovation approach to propose an efficient and generic solution to provide support to the deployment of IoT system in rural areas. Our proposal includes an MQTT (Message Queuing Telemetry Transport) proxy to integrate generic lowcost and low-power sensor devices in a messaging system based on LoRa (Long Range) technology. MQTT allows these data to be provided to external ¿data lakes¿ so that they can be used for tasks such as reporting, visualization, advanced analytic, and machine learning. LoRa technology provides long wireless links that can be used to connect villages and towns. Through a REST-based interface and using JSON as a lightweight data-interchange format, we show how our platform can be used to distribute generic sensor information from rural communities. Finally, we demonstrate through experimental evaluation that this solution provides stable data transfers over links of various kilometers with a minimal utilization of resources., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Efficient and coordinated vertical takeoff of UAV swarms

  • Fabra Collado, Francisco José
  • Wubben, Jamie
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] As we witness the unrelenting growth of the UAV sector, novel and more sophisticated applications keep emerging every year, with many more in the horizon. Among these, applications that require the adoption of UAV swarms are among the most complex, as deploying swarms requires the interaction and cooperation of all the UAVs involved, which can become quite challenging. In this work we specifically focus on the swarm takeoff procedure for UAVs of the Vertical Take-Off and Landing (VTOL) type, proposing a heuristic that achieves reduced computing overhead while introducing near-optimal assignments of UAV positions in the swarm formation selected. Such heuristic is complemented by an efficient and collision-free takeoff approach that relies on adequate ordering and inter- UAV communications to achieve a sequential phased takeoff. A large number of experiments using our own ArduSim emulation platform, which is totally compatible with real drone code, evidence the improvements achieved in terms of time overhead and safety when compared to both ideal and agnostic approaches., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Three Dimensional UAV Positioning for Dynamic UAV-to-Car Communications

  • HADIWARDOYO, SEILENDRIA ARDITYARAMA
  • Krinkin, Kirill
  • Klionskiy, Dmitry
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In areas with limited infrastructure, Unmanned Aerial Vehicles (UAVs) can come in handy as relays for car-to-car communications. Since UAVs are able to fully explore a three-dimensional environment while flying, communications that involve them can be affected by the irregularity of the terrains, that in turn can cause path loss by acting as obstacles. Accounting for this phenomenon, we propose a UAV positioning technique that relies on optimization algorithms to improve the support for vehicular communications. Simulation results show that the best position of the UAV can be timely determined considering the dynamic movement of the cars. Our technique takes into account the current flight altitude, the position of the cars on the ground, and the existing flight restrictions., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018 , Spain, under Grant RTI2018-096384-B-I00, and grant BES-2015-075988, Ayudas para contratos predoctorales 2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel resilient and reconfigurable swarm management scheme

  • Wubben, Jamie
  • Fabra, Francisco
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] As we witness the fast growth of the Unmanned Aerial Vehicles (UAVs) field, new applications and services emerge at a rapid pace. Above all, the interest in groups of UAVs working together (swarms) is gaining momentum. This interest emerges since swarms are able to undertake more sophisticated tasks. Furthermore, they can also increase task performance and/or robustness. However, organizing a multi-UAV flight is not easy, involving challenges in terms of (i) swarm formation definition, (ii) takeoff procedure, (iii) in-flight coordination, (iv) communication between the swarm elements, (v) swarm layout reconfiguration, (vi) handling the loss of swarms elements, and (vii) controlled landing. These and other issues still hold back the mainstream adoption of swarms in sectors such as agriculture, border surveillance, and parcel delivery. In this work we provide solutions for two of the main critical challenges: (a) swarm layout reconfiguration, and (b) handling the loss of swarm elements. A wide set of experiments were made using our own realistic UAV emulation tool (ArduSim) in order to validate our proposals. The experiments show that the chances of facing collisions during the reconfiguration are greatly reduced even in error-prone scenarios, and that, in many cases, the loss of a UAV is handled seamlessly; otherwise (in the worst-case scenarios) a delay of just a few seconds is introduced. Additionally, this work addresses cases where, due to the lack of proper communication between the swarm elements, a swarm splits up. Experiments show that with our swarm resilience mechanisms those cases are inherently solved by creating autonomous sub-swarms which will then complete their part of the mission independently., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the Effectiveness of COVID-19 Bluetooth-Based Smartphone Contact Tracing Applications

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] One of the strategies to control the spread of infectious diseases is based on the use of specialized applications for smartphones. These apps offer the possibility, once individuals are detected to be infected, to trace their previous contacts in order to test and detect new possibly-infected individuals. This paper evaluates the effectiveness of recently developed contact tracing smartphone applications for COVID-19 that rely on Bluetooth to detect contacts. We study how these applications work in order to model the main aspects that can affect their performance: precision, utilization, tracing speed and implementation model (centralized vs. decentralized). Then, we propose an epidemic model to evaluate their efficiency in terms of controlling future outbreaks and the effort required (e.g., individuals quarantined). Our results show that smartphone contact tracing can only be effective when combined with other mild measures that can slightly reduce the reproductive number R0 (for example, social distancing). Furthermore, we have found that a centralized model is much more effective, requiring an application utilization percentage of about 50% to control an outbreak. On the contrary, a decentralized model would require a higher utilization to be effective., This work was partially supported by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018", Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A realistic proposal to considerably improve the energy footprint and energy efficiency of a standard house of social interest in Chile

  • Monsalve, Felipe
  • Soler Fernández, David
This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

TACASHI: Trust-Aware Communication Architecture for Social Internet of Vehicles

  • Kerrache, Chaker Abdelaziz
  • Lagraa, Nasreddine
  • Hussain, Rasheed
  • Ahmed, Syed Hassan
  • Benslimane, Abderrahim
  • Vegni, Anna Maria
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] The Internet of Vehicles (IoV) has emerged as a new spin-off research theme from traditional vehicular ad hoc networks. It employs vehicular nodes connected to other smart objects equipped with a powerful multisensor platform, communication technologies, and IP-based connectivity to the Internet, thereby creating a possible social network called Social IoV (SIoV). Ensuring the required trustiness among communicating entities is an important task in such heterogeneous networks, especially for safety-related applications. Thus, in addition to securing intervehicle communication, the driver/passengers honesty factor must also be considered, since they could tamper the system in order to provoke unwanted situations. To bridge the gaps between these two paradigms, we envision to connect SIoV and online social networks (OSNs) for the purpose of estimating the drivers and passengers honesty based on their OSN profiles. Furthermore, we compare the current location of the vehicles with their estimated path based on their historical mobility profile. We combine SIoV, path-based and OSN-based trusts to compute the overall trust for different vehicles and their current users. As a result, we propose a trust-aware communication architecture for social IoV (TACASHI). TACASHI offers a trust-aware social in-vehicle and intervehicle communication architecture for SIoV considering also the drivers honesty factor based on OSN. Extensive simulation results evidence the efficiency of our proposal, ensuring high detection ratios >87% and high accuracy with reduced error ratios, clearly outperforming previous proposals, known as RTM and AD-IoV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using Machine-Learning Algorithms for Eutrophication Modeling: Case Study of Mar Menor Lagoon (Spain)

  • Jimeno-Sáez, Patricia
  • Senent-Aparicio, Javier
  • Pérez-Sánchez, Julio
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The Mar Menor is a hypersaline coastal lagoon with high environmental value and a characteristic example of a highly anthropized hydro-ecosystem located in the southeast of Spain. An unprecedented eutrophication crisis in 2016 and 2019 with abrupt changes in the quality of its waters caused a great social alarm. Understanding and modeling the level of a eutrophication indicator, such as chlorophyll-a (Chl-a), benefits the management of this complex system. In this study, we investigate the potential machine learning (ML) methods to predict the level of Chl-a. Particularly, Multilayer Neural Networks (MLNNs) and Support Vector Regressions (SVRs) are evaluated using as a target dataset information of up to nine different water quality parameters. The most relevant input combinations were extracted using wrapper feature selection methods which simplified the structure of the model, resulting in a more accurate and efficient procedure. Although the performance in the validation phase showed that SVR models obtained better results than MLNNs, experimental results indicated that both ML algorithms provide satisfactory results in the prediction of Chl-a concentration, reaching up to 0.7 R-CV(2) (cross-validated coefficient of determination) for the best-fit models., This research was partially funded by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by Spanish Ministry of Science, Innovation and Universities under grants RTI2018-096384-B-I00 and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Centralized Route-Management Solution for Autonomous Vehicles in Urban Areas

  • Zambrano-Martinez, Jorge Luis
  • Soler Fernández, David
  • Gayraud, Thierry
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Lemus Zúñiga, Lenin Guillermo|||0000-0002-6361-6019
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Currently, one of the main challenges that large metropolitan areas must face is traffic congestion. To address this problem, it becomes necessary to implement an efficient solution to control traffic that generates benefits for citizens, such as reducing vehicle journey times and, consequently, environmental pollution. By properly analyzing traffic demand, it is possible to predict future traffic conditions, using this information for the optimization of the routes taken by vehicles. Such an approach becomes especially effective if applied in the context of autonomous vehicles, which have a more predictable behavior, thus enabling city management entities to mitigate the effects of traffic congestion and pollution, thereby improving the traffic flow in a city in a fully centralized manner. This paper represents a step forward towards this novel traffic management paradigm by proposing a route server capable of handling all the traffic in a city, and balancing traffic flows by accounting for present and future traffic congestion conditions. We perform a simulation study using real data of traffic congestion in the city of Valencia, Spain, to demonstrate how the traffic flow in a typical day can be improved using our proposed solution. Experimental results show that our proposed traffic prediction equation, combined with frequent updating of traffic conditions on the route server, can achieve substantial improvements in terms of average travel speeds and travel times, both indicators of lower degrees of congestion and improved traffic fluidity., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018 , Spain, under Grant RTI2018-096384-B-I00, and by the Programa de Becas SENESCYT de la República del Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance evaluation of edge-computing platforms for the prediction of low temperatures in agriculture using deep learning

  • Guillén-Navarro, Miguel A.
  • Llanes, Antonio
  • Imbernón, Baldomero
  • Martínez-España, Raquel
  • Bueno-Crespo, Andrés
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The Internet of Things (IoT) is driving the digital revolution. AlSome palliative measures aremost all economic sectors are becoming "Smart" thanks to the analysis of data generated by IoT. This analysis is carried out by advance artificial intelligence (AI) techniques that provide insights never before imagined. The combination of both IoT and AI is giving rise to an emerging trend, called AIoT, which is opening up new paths to bring digitization into the new era. However, there is still a big gap between AI and IoT, which is basically in the computational power required by the former and the lack of computational resources offered by the latter. This is particularly true in rural IoT environments where the lack of connectivity (or low-bandwidth connections) and power supply forces the search for "efficient" alternatives to provide computational resources to IoT infrastructures without increasing power consumption. In this paper, we explore edge computing as a solution for bridging the gaps between AI and IoT in rural environment. We evaluate the training and inference stages of a deep-learning-based precision agriculture application for frost prediction in modern Nvidia Jetson AGX Xavier in terms of performance and power consumption. Our experimental results reveal that cloud approaches are still a long way off in terms of performance, but the inclusion of GPUs in edge devices offers new opportunities for those scenarios where connectivity is still a challenge., This work was partially supported by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by Spanish Ministry of Science, Innovation and Universities under grants RTI2018-096384-B-I00 (AEI/FEDER, UE) and RTC-2017-6389-5.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MUSCOP: Mission-Based UAV Swarm Coordination Protocol

  • Fabra Collado, Francisco José
  • Zamora, Willian
  • Reyes, Pablo
  • Sangüesa, Julio A.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Nowadays, Unmanned Aerial Vehicles (UAVs) have become the preferred, and sometimes the only support tool when facing critical scenarios such as earthquakes, search and rescue missions, and border surveillance. In these scenarios, deploying a UAV swarm instead of a single UAV can provide additional benefits when, for example, cargo carrying requirements exceed the lifting power of a single UAV, or when the deployment of several UAVs simultaneously can accelerate the accomplishment of the mission, and broaden the covered area. To this aim, in this paper we present MUSCOP, a protocol that allows multiple UAVs to perfectly coordinate their flight when performing planned missions. Experimental results show that the proposed protocol is able to achieve a high degree of swarm cohesion independently of the swarm formation adopted, and even in the presence of very lossy channels, achieving minimal synchronization delays and very low position offsets with regard to the ideal case., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00, and in part by the Universitat Politecnica de Valencia (UPV) for the training of Ph.D. researchers under Grant FPI-2017-S1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology for evaluating digital contact tracing apps based on the COVID-19 experience

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Controlling the spreading of infectious diseases has been shown crucial in the COVID-19 pandemic. Traditional contact tracing is used to detect newly infected individuals by tracing their previous contacts, and by selectively checking and isolating any individuals likely to have been infected. Digital contact tracing with the utilisation of smartphones was contrived as a technological aid to improve this manual, slow and tedious process. Nevertheless, despite the high hopes raised when smartphone-based contact tracing apps were introduced as a measure to reduce the spread of the COVID-19, their efficiency has been moderately low. In this paper, we propose a methodology for evaluating digital contact tracing apps, based on an epidemic model, which will be used not only to evaluate the deployed Apps against the COVID-19 but also to determine how they can be improved for future pandemics. Firstly, the model confirms the moderate effectiveness of the deployed digital contact tracing, confirming the fact that it could not be used as the unique measure to fight against the COVID-19, and had to be combined with additional measures. Secondly, several improvements are proposed (and evaluated) to increase the efficiency of digital control tracing to become a more useful tool in the future., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AI-enabled autonomous drones for fast climate change crisis assessment

  • Hernández, Daniel
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Silla, Federico|||0000-0002-6435-1200
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Climate change is one of the greatest challenges for modern societies. Its consequences, often associated with extreme events, have dramatic results worldwide. New synergies between different disciplines, including artificial intelligence (AI), Internet of Things (IoT), and edge computing can lead to radically new approaches for the real-time tracking of natural disasters that are also designed to reduce the environmental footprint. In this article, we propose an AI-based pipeline for processing natural disaster images taken from drones. The purpose of this pipeline is to reduce the number of images to be processed by the first responders of the natural disaster. It consists of three main stages: 1) a lightweight autoencoder based on deep learning; 2) a dimensionality reduction using the t-distributed stochastic neighbor embedding algorithm; and 3) a fuzzy clustering procedure. This pipeline is evaluated on several edge computing platforms with low-power accelerators to assess the design of intelligent autonomous drones to provide this service in real time. Our experimental evaluation focuses on flooding, showing that the amount of information to be processed is substantially reduced, whereas edge computing platforms with low-power graphics accelerators are placed as a compelling alternative for processing these heavy computational workloads, obtaining a performance loss of only 2.3 x compared to its cloud counterpart version, running both the training and inference steps., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, and Grant RTC2019-007159-5; in part by the Fundacien Seneca under Project 20813/PI/18; and in part by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos" under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FSF: Applying machine learning techniques to data forwarding in socially selfish Opportunistic Networks

  • Souza, Camilo
  • MOTA, EDJAIR
  • Soares, Diogo
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
[EN] Opportunistic networks are becoming a solution to provide communication support in areas with overloaded cellular networks, and in scenarios where a fixed infrastructure is not available, as in remote and developing regions. A critical issue, which still requires a satisfactory solution, is the design of an efficient data delivery solution trading off delivery efficiency, delay, and cost. To tackle this problem, most researchers have used either the network state or node mobility as a forwarding criterion. Solutions based on social behaviour have recently been considered as a promising alternative. Following the philosophy from this new category of protocols, in this work, we present our ¿FriendShip and Acquaintanceship Forwarding¿ (FSF) protocol, a routing protocol that makes its routing decisions considering the social ties between the nodes and both the selfishness and the device resources levels of the candidate node for message relaying. When a contact opportunity arises, FSF first classifies the social ties between the message destination and the candidate to relay. Then, by using logistic functions, FSF assesses the relay node selfishness to consider those cases in which the relay node is socially selfish. To consider those cases in which the relay node does not accept receipt of the message because its device has resource constraints at that moment, FSF looks at the resource levels of the relay node. By using the ONE simulator to carry out trace-driven simulation experiments, we find that, when accounting for selfishness on routing decisions, our FSF algorithm outperforms previously proposed schemes, by increasing the delivery ratio up to 20%, with the additional advantage of introducing a lower number of forwarding events. We also find that the chosen buffer management algorithm can become a critical element to improve network performance in scenarios with selfish nodes., This work was partially supported by the "Camilo Batista de Souza/Programa Doutorado-sanduiche no Exterior (PDSE)/Processo 88881.133931/2016-01" and by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling Distributed MQTT Systems Using Multicommodity Flow Analysis

  • Manzoni, Pietro|||0000-0003-3753-0403
  • Maniezzo, Vittorio
  • Boschetti, Marco A.
[EN] The development of technologies that exploit the Internet of Things (IoT) paradigm has led to the increasingly widespread use of networks formed by different devices scattered throughout the territory. The Publish/Subscribe paradigm is one of the most used communication paradigms for applications of this type. However, adopting these systems due to their centralized structure also leads to the emergence of various problems and limitations. For example, the broker is typically the single point of failure of the system: no communication is possible if the broker is unavailable. Moreover, they may not scale well considering the massive numbers of IoT devices forecasted in the future. Finally, a network architecture with a single central broker is partially at odds with the edge-oriented approach. This work focuses on the development of an adaptive topology control approach, able to find the most efficient network configuration maximizing the number of connections and reduce the waste of resources within it, starting from the definition of the devices and the connections between them present in the system. To reach the goal, we leverage an integer linear programming mathematical formulation, providing the basis to solve and optimize the problem of network configuration in contexts where the resources available to the devices are limited., This work is derived from R&D project RTI2018-096384-B-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and by the European Union's Horizon 2020 research and innovation programme under grant agreement No. 101017861.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Toward secure, efficient, and seamless reconfiguration of UAV swarm formations

  • Wubben, Jamie
  • Aznar, Pablo
  • Fabra Collado, Francisco José
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Unmanned Aerial vehicles (UAVs) have gained a lot of interest over the last years due to the many fields of potential application. Nowadays, researchers are becoming interested in groups of UAVs working together. The collaborations between UAVs open a wide field of opportunities, because they are typically able to do more sophisticated tasks than a single UAV. However, collaboration between multiple UAVs is still a complex task, and significant challenges need to be addressed before their mainstream adoption. For instance, the automatic reconfiguration of a swarm can be used to adapt the swarm to changing application demands to solve a task in a more efficient and effective manner. However, the chances of collision become high if reconfiguration is not carefully planned. In this work we propose an approach to allow changing the shape of a UAV formation during flight through a computational inexpensive method that is able to decrease collision chances significantly. During the experiments we tested different reconfiguration events that are prone to collisions. Results have shown that our approach maintains a safe distance (greater than 5 meters) between the UAVs, while keeping the time overhead limited to a few tenths of a second. Furthermore, scalability tests have proven that our approach can handle the reconfiguration of at least 25 UAVs simultaneously., This work was partially supported by the Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NFK: a novel fault-tolerant K-mutual exclusion algorithm for mobile and opportunistic ad hoc networks

  • Allaoui, Tahar
  • Yagoubi, Mohamed Bachir
  • Kerrache, Chaker Abdelaziz
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] This paper presents a fault-tolerant algorithm ensuring multiple resources sharing in mobile ad hoc networks (MANETs) that is able to handle the known K-mutual exclusion problem in such mobile environments. The proposed algorithm relies on a token-based strategy, and requires information about resources and their use to be carried in routing protocol control messages. This way, our solution avoids any additional exchange of messages. Furthermore, experimental results show that it offers a fast response time. Moreover, we introduce a dual-layer fault-tolerance mechanism that tolerates the faults of several sites at the same time without affecting the well functioning of the system. Simulation results also evidence the high efficiency of our proposal, which achieves reduced overhead and response delay even in the presence of critical situations where multiple simultaneous faults occur.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Indoor vehicles geolocalization using LoRaWAN

  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
[EN] One of the main drawbacks of Global Navigation Satellite Sytems (GNSS) is that they do not work indoors. When inside, there is often no direct line from the satellite signals to the device and the ultra high frequency (UHF) used is blocked by thick, solid materials such as brick, metal, stone or wood. In this paper, we describe a solution based on the Long Range Wide Area Network (LoRaWAN) technology to geolocalise vehicles indoors. Through estimation of the behaviour of a LoRaWAN channel and using trilateration, the localisation of a vehicle can be obtained within a 20¿30 m range. Indoor geolocation for Intelligent Transporation Systems (ITS) can be used to locate vehicles of any type in underground parkings, keep a platoon of trucks in formation or create geo-fences, that is, sending an alert if an object moves outside a defined area, like a bicycle being stolen. Routing of heavy vehicles within an industrial setting is another possibility., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018 , Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Air Quality in Urban Recreational Areas through Smart Traffic Management

  • Padrón-Pérez, José Daniel|||0000-0001-6766-3034
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Soler Fernández, David
[EN] Green parks are the only natural places for recreation in many metropolitan areas, and the European Commission is seeking to improve their air quality and, consequently, citizens¿ physical and mental health. One of the recently adopted approaches is to achieve pollution abatement in these green areas by reducing nearby traffic. In this paper, we analyze the impact of reducing the traffic in nearby streets to avoid pollution by proposing two different approaches. Our goal is to improve the pollution levels in Valencia¿s most significant green areas by limiting vehicular traffic flow in nearby streets. To this end, we consider two alternative solutions¿a more restrictive one and a less restrictive approach¿in an attempt to achieve a tradeoff between emission control and congestion avoidance. Moreover, we show how our proposal can reroute traffic throughout the city without having traffic jam problems associated with the proposed approaches. In addition, we determine how the traffic flow data and the emissions in the city vary due to the traffic restrictions that we enforce. The experimental results show that it is possible to achieve improvements in terms of pollution with both of our restriction approaches; in particular, with the partial traffic isolation model, the pollution rates in the target area decreased by 17%, which we consider an excellent initial result for the applicability and effectiveness of these methods when an adequate traffic routing system is adopted., This work was partially supported by the "Ministerio de Ciencia e Innovacion, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I + D + I 2018", Spain, under Grant RTI2018-096384-B-I00, and by "ERDF: A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

QN-Docking: An innovative molecular docking methodology based on Q-Networks

  • Serrano, Antonio
  • Imbernón, Baldomero
  • Pérez-Sánchez, Horacio
  • Bueno-Crespo, Andrés
  • Abellán, José L.
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Molecular docking is often used in computational chemistry to accelerate drug discovery at early stages. Many molecular simulations are performed to select the right pharmacological candidate. However, traditional docking methods are based on optimization heuristics such as Monte Carlo or genetic that try several hundreds of these candidates giving rise to expensive computations. Thus, an alternative methodology called QN-Docking is proposed for developing docking simulations more efficiently. This new approach is built upon Q-learning using a single-layer feedforward neural network to train a single ligand or drug candidate (the agent) to find its optimal interaction with the host molecule. In addition, the corresponding Reinforcement Learning environment and the reward function based on a force-field scoring function are implemented. The proposed method is evaluated in an exemplary molecular scenario based on the kaempferol and beta-cyclodextrin. Results for the prediction phase show that QN-Docking achieves 8x speedup compared to stochastic methods such as METADOCK 2, a novel high-throughput parallel metaheuristic software for docking. Moreover, these results could be extended to many other ligand-host pairs to ultimately develop a general and faster docking method., This work was partially supported by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia (Spain) under Projects 20813/PI/18, 20988/PI/18 and 20524/PDC/18, and by the Spanish Ministry of Science and Innovation under grants RTI2018-096384-B-I00, RYC2018-025580-I and CTQ2017-87974-R. The authors also thankfully acknowledge the e-infrastructure program of the Research Council of Norway, and the supercomputer center of UiT -the Arctic University of Norway.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving prediction of COVID-19 evolution by fusing epidemiological and mobility data

  • García-Cremades, Santi
  • Morales-García, Juan
  • Hernández-Sanjaime, Rocío
  • Martínez-España, Raquel
  • Bueno-Crespo, Andrés
  • López-Espín, José J.
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] We are witnessing the dramatic consequences of the COVID¿19 pandemic which, unfortunately, go beyond the impact on the health system. Until herd immunity is achieved with vaccines, the only available mechanisms for controlling the pandemic are quarantines, perimeter closures and social distancing with the aim of reducing mobility. Governments only apply these measures for a reduced period, since they involve the closure of economic activities such as tourism, cultural activities, or nightlife. The main criterion for establishing these measures and planning socioeconomic subsidies is the evolution of infections. However, the collapse of the health system and the unpredictability of human behavior, among others, make it difficult to predict this evolution in the short to medium term. This article evaluates different models for the early prediction of the evolution of the COVID¿19 pandemic to create a decision support system for policy¿makers. We consider a wide branch of models including artificial neural networks such as LSTM and GRU and statistically based models such as autoregressive (AR) or ARIMA. Moreover, several consensus strategies to ensemble all models into one system are proposed to obtain better results in this uncertain environment. Finally, a multivariate model that includes mobility data provided by Google is proposed to better forecast trend changes in the 14¿day CI. A real case study in Spain is evaluated, providing very accurate results for the prediction of 14¿day CI in scenarios with and without trend changes, reaching 0.93 R2, 4.16 RMSE and 1.08 MAE., This work has been partially supported by the Spanish Ministry of Science and Innovation, under Grants RYC2018-025580-I, RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302 and a predoctoral contract by the Generalitat Valenciana and the European Social Fund under Grant ACIF/2018/219.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Entropy based routing for mobile, low power and lossy wireless sensors networks

  • Carvalho, Celso
  • Mota, Edjair
  • Ferraz, Eric
  • Seixas, Paulo
  • Souza, Paulo
  • Tavares, Vitor
  • Lucena Filho, Walfredo
  • Ferreira, David
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Routing protocol for low-power and lossy networks is a routing solution specifically developed for wireless sensor networks, which does not quickly rebuild topology of mobile networks. In this article, we propose a mechanism based on mobility entropy and integrate it into the corona RPL (CoRPL) mechanism, which is an extension of the IPv6 routing protocol for low-power and lossy networks (RPL). We extensively evaluated our proposal with a simulator for Internet of Things and wireless sensor networks. The mobility entropy-based mechanism, called CoRPL+E, considers the displacement of nodes as a deciding factor to define the links through which nodes communicate. Simulation results show that the proposed mechanism, when compared to CoRPL mechanism, is effective in reducing packet loss and latency in simulated mobile routing protocol for low-power and lossy networks. From the simulation results, one can see that the CoRPL+E proposal mechanism provides a packet loss reduction rate of up to 50% and delays reduction by up to 25% when compared to CoRPL mechanism., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research was funded by SIDIA Institute of Science and Technology, by Coordenacao de Aperfeicxoamento de Pessoal de Nivel Superior (CAPES), by Fundacao de Amparo a Pesquisa do Estado do Amazonas (FAPEAM)-support programs (Programa Primeiros Projetos (PPP) and Programa de Tecnologia da Informacao na Amazonia (PROTI)-Amazonia-Mobilidade), by Camara Tecnica de Reconstrucao e Recuperacao de Infraestrutura (CT-INFRA) of Ministerio da Ciencia, Tecnologia, Inovacoes e Comunicacoes(MCTI)/Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq), and by Secretaria de Estado de Ciencia, Tecnologia e Inovacao Amazonas (SECTI-AM) and Government of Amazon State, Brazil.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating How Smartphone Contact Tracing Technology Can Reduce the Spread of Infectious Diseases: The Case of COVID-19

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
[EN] Detecting and controlling the diffusion of infectious diseases such as COVID-19 is crucial to managing epidemics. One common measure taken to contain or reduce diffusion is to detect infected individuals and trace their prior contacts so as to then selectively isolate any individuals likely to have been infected. These prior contacts can be traced using mobile devices such as smartphones or smartwatches, which can continuously collect the location and contacts of their owners by using their embedded localisation and communications technologies, such as GPS, Cellular networks, Wi-Fi, and Bluetooth. This paper evaluates the effectiveness of these technologies and determines the impact of contact tracing precision on the spread and control of infectious diseases. To this end, we have created an epidemic model that we used to evaluate the efficiency and cost (number of people quarantined) of the measures to be taken, depending on the smartphone contact tracing technologies used. Our results show that in order to be effective for the COVID-19 disease, the contact tracing technology must be precise, contacts must be traced quickly, and a significant percentage of the population must use the smartphone contact tracing application. These strict requirements make smartphone-based contact tracing rather ineffective at containing the spread of the infection during the first outbreak of the virus. However, considering a second wave, where a portion of the population will have gained immunity, or in combination with some other more lenient measures, smartphone-based contact tracing could be extremely useful., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Collision-free cooperative Unmanned Aerial Vehicle protocols for sustainable aerial services

  • Fabra, Francisco
  • Vegni, Anna Maria
  • Loscri, Valeria
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Unmanned Aerial Vehicles (UAVs) are offering many global industry sectors the opportunity to adopt more sustainable business models. They offer innovative ways of managing resources and water and offer newer opportunities to address key challenges in many areas like border surveillance, precision agriculture and search and rescue missions. All these new applications areas tend to require the cooperation of groups, or "swarms" of UAVs to provide collaborative sensing and processing solutions. These new scenarios impose new requirements in terms of safety, coordination, and operation management. This paper provides an overview of some of the technical challenges that multirotor UAVs are still facing in terms of aerial coordination and interaction. In this regard, it focusses on recent developments available in the literature and presents some contributions realised during the past few years by the authors addressing UAV interaction to achieve collision-free flights and swarm-based missions. Based on the analysis provided in this work, the paper is able to provide insight into the challenges still open that need to be solved in order to enable effective UAV-based solutions to support sustainable aerial services., Ministerio de Ciencia e Innovacion, Grant/AwardNumber: RTI2018-096384-B-I00
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

FUDGE: a frugal edge node for advanced IoT solutions in contexts with limited resources

  • Nakamura, Kiyoshy
  • Zennaro, Marco
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The growing connection between the Internet of Things (IoT) andArtificial Intelligence (AI) poses many challenges that require novelapproaches and even a rethinking of the entire communicationand processing architecture to meet new requirements for latency, reliability, power consumption and resource usage. Edge computingis a promising approach to meet these challenges that can also bebeneficial in delivering advanced AI-based IoT solutions in areaswhere connectivity is scarce and resources are generally limited.In this paper, we introduce an edge/fog generic architecture toallow the adoption of edge solutions in IoT deployments in poorlyconnected and resource limited scenarios. To this end, we integrate,using microservices, an MQTT based system that can collect ingressdata, handle their persistency, and coordinate data integration withthe cloud using a specific service calledaggregator. The edge stations have a dedicated channel with the aggregator based on LoRa to enable long-range transmissions with low power consumption. Some details of the implementation aspects are described along withsome preliminary results. Initial testing of the architecture indicatesthat it is flexible and robust enough to become an alternative forthe deployment of advanced IoT services in resource-constrainedcontexts., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018, Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LADEA: A Software Infrastructure for Audio Delivery and Analytics

  • Nakamura, Kiyoshy
  • Hernandez, Daniel
  • Zennaro, Marco
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] The LoRa technology enables long distance links with reduced power consumption at low cost, the main limitation being the low bandwidth that it offers. With LoRa, remote locations, like rural areas, can benefit from connectivity based services that would otherwise be impossible. In this work, we describe a LoRa architecture that can include generic external data sources using an MQTT-based interface. We particularly focus on audio sources aiming to two basic services: a voice messaging system that allows users who cannot read or write to send voice notes, and an audio compression service to extract the main features from the audio input to use it for developing intelligent ML-based audio analytics., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Path Loss Predictions in the VHF and UHF Bands Within Urban Environments: Experimental Investigation of Empirical, Heuristics and Geospatial Models

  • Faruk, Nasir
  • Popoola, Segun I.
  • Surajudeen-Bakinde, Nazmat T.
  • Oloyede, Abdulkarim A.
  • Abdulkarim, Abubakar
  • Olawoyin, Lukman A.
  • Ali, Maaruf
  • Atayero, Aderemi A.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Deep knowledge of how radio waves behave in a practical wireless channel is required for effective planning and deployment of radio access networks in urban environments. Empirical propagation models are popular for their simplicity, but they are prone to introduce high prediction errors. Different heuristic methods and geospatial approaches have been developed to further reduce path loss prediction error. However, the efficacy of these new techniques in built-up areas should be experimentally verified. In this paper, the efficiencies of empirical, heuristic, and geospatial methods for signal fading predictions in the very high frequency (VHF) and ultra-high frequency (UHF) bands in typical urban environments are evaluated and analyzed. Electromagnetic field strength measurements are performed at different test locations within four selected cities in Nigeria. The data collected are used to develop path loss models based on artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS), and Kriging techniques. The prediction results of the developed models are compared with those of selected empirical models and field measured data. Apart from Egli and ECC-33, the root mean squared error (RMSE) produced by all other models under investigation are considered acceptable. Specifically, the ANN and ANFIS models yielded the lowest prediction errors. However, the empirical models have the lowest standard deviation errors across all the bands. The findings of this study will help radio network engineers to achieve efficient radio coverage estimation; determine the optimal base station location; make a proper frequency allocation; select the most suitable antenna; and perform interference feasibility studies., This work was supported jointly by the funding received from IoT-Enabled Smart and Connected Communities (SmartCU) Research Cluster and the Center for Research, Innovation and Discovery (CUCRID) of Covenant University, Ota, Nigeria.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UAV Mobility model for dynamic UAV-to-car communications in 3D environments

  • Hadiwardoyo, Seilendria A.
  • Dricot, Jean-Michel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In scenarios where there is a lack of reliable infrastructures to support car-to-car communications, Unmanned Aerial Vehicles (UAVs) can be deployed as mobile infrastructures. However, the UAVs should be deployed at adequate location and heights to maintain the coverage throughout time as the irregularities of the terrain may have a significant impact on the radio signals sent to distribute information. So, flight altitude and location should be constantly adjusted in order to avoid hilly or mountainous terrains that might hinder the Line-of-Sight (LOS). In this paper, we propose a three-dimensional mobility model to define the movement of the UAV so as to maintain good coverage levels in terms of communications with moving ground vehicles by taking into account the elevation information of the Earth's surface and the signal power towards the different vehicles. The results showed that our proposed model is able to extend the times with connectivity between the UAV and the cars compared to a simpler two-dimensional model, which never considers the altitude, and a static model, which maintains the same UAV position from the beginning to the end of the experiment., This work was partially supported by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018", Spain, under Grant RTI2018-096384-B-I00, grant BES-2015-075988, Ayudas para contratos predoctorales 2015 and the Erasmus+ practicas grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detecting Vehicles&apos, Relative Position on Two-Lane Highways Through a Smartphone-Based Video Overtaking Aid Application

  • Patra, Subhadeep
  • Van Hamme, David
  • Veelaert, Peter
  • Zamora, Willian
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] In this paper we present a smartphone-based real-time video overtaking architecture for vehicular networks. The developed application aims to prevent head-on collisions that might occur due to attempts to overtake when the view of the driver is obstructed by the presence of a larger vehicle ahead. Under such conditions, the driver does not have a clear view of the road ahead and of any vehicles that might be approaching from the opposite direction, resulting in a high probability of accident occurrence. Our application relies on the use of a dashboard-mounted smartphone with the back camera facing the windshield, and having the screen towards the driver. A video is streamed from the vehicle ahead to the vehicle behind automatically, where it is displayed so that the driver can decide if it is safe to overtake. One of the major challenges is the way to pick the right video source and destination among vehicles in close proximity, depending on their relative position on the road. For this purpose, we have focused on two different methods: one relying solely on GPS data, and the other involving the use of the camera and vehicle heading information. Our experiments show that the faster method, using just the location information, is prone to errors due to GPS inaccuracies. A second method that depends on data fusion from the optical sensor and GPS, although accurate over short distances, becomes more computationally intensive, and its performance significantly depends on the quality of the camera., This work was partially funding by the "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos I+D+I 2018", Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimising data diffusion while reducing local resources consumption in Opportunistic Mobile Crowdsensing

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Borrego, Carlos
  • Marquez Barja, Johann M.
[EN] The combination of Mobile Crowdsensing (MCS) with Opportunistic Networking (Opp-Net) allows mobile users to share sensed data easily and conveniently without the use of fixed infrastructure. OppNet is based on intermittent connectivity among wireless mobile devices, in which mobile nodes may store, carry and forward messages (sensing information) by taking advantage of wireless ad hoc communication opportunities. A common approach for the diffusion of this sensing data in OppNet is the epidemic protocol, which carries out a fast data diffusion at the expense of increasing the usage of local buffers on mobile nodes and also the number of transmissions, thereby limiting scalability. A way to reduce this consumption of local resources is to set a message expiration time that forces the removal of old messages from local buffers. Since dropping messages too early may reduce the speed of information diffusion, we propose a dynamic expiration time setting to limit this effect. Moreover, we introduce an epidemic diffusion model for evaluating the impact of the expiration time. This model allows us to obtain optimal expiration times that achieve performances similar to those other approaches where no expiration is considered, with a significant reduction of local buffer and network usage. Furthermore, in our proposed model, the buffer utilisation remains steady with the number of nodes, whereas in other approaches it increases sharply. Finally, our approach is evaluated and validated in a mobile crowdsensing scenario, where students collect and broadcast information regarding a university campus, showing a significant reduction on buffer usage and nodes message transmissions, and therefore, decreasing battery consumption., This work was partially supported by the Ministerio de Ciencia, Innovación y Universidades, Spain, under Grant RTI2018- 096384-B-I00. Also, this work has been partially performed in the framework of the European Union¿s Horizon 2020 project 5G-CARMEN co-funded by the EU under grant agreement No. 825012. The views expressed are those of the authors and do not necessarily represent the project. The Commission is not liable for any use that may be made of any of the information contained therein.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Providing resilience to UAV swarms following planned missions

  • Wubben, J.
  • Catalan, I.
  • Lurbe, M.
  • Fabra, F.
  • Martinez, F.J.
  • Calafate, C.T.
  • Cano, J.C.
  • Manzoni, P.
As we experience an unprecedented growth in the field of Unmanned Aerial Vehicles (UAVs), more and more applications keep arising due to the combination of low cost and flexibility provided by these flying devices, especially those of the multirrotor type. Within this field, solutions where several UAVs team-up to create a swarm are gaining momentum as they enable to perform more sophisticated tasks, or accelerate task execution compared to the single-UAV alternative. However, advanced solutions based on UAV swarms still lack significant advancements and validation in real environments to facilitate their adoption and deployment. In this paper we take a step ahead in this direction by proposing a solution that improves the resilience of swarm flights, focusing on handling the loss of the swarm leader, which is typically the most critical condition to be faced. Experiments using our UAV emulation tool (ArduSim) evidence the correctness of the protocol under adverse circumstances, and highlight that swarm members are able to seamlessly switch to an alternative leader when necessary, introducing a negligible delay in the process in most cases, while keeping this delay within a few seconds even in worst-case conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

An interference-resilient IIoT solution for measuring the effectiveness of industrial processes

  • Herrero, A.C.
  • Martinez, F.J.
  • Garrido, P.
  • Sanguesa, J.A.
  • Calafate, C.T.
The development and deployment of the so-called Industrial Internet of Things (IIoT) have significantly increased the control and monitoring capabilities of companies, and thus their potential productivity. In this paper, we propose the use of Raspberry Pi devices in industrial environments to mea-sure productivity parameters. Our proposal can economically and efficiently gather data related with the availability and productivity of industrial machinery. However, since low-cost devices are prone to suffer the negative effects of electromagnetic interferences, we additionally propose an alternative to prevent signal alterations caused by them. More specifically, we propose a filtering mechanism called Smart Coded Filter (SCF), which eliminates wrong signals caused by electromagnetic interferences, and, therefore, highly improves the accuracy when estimating the availability metric. Results obtained demonstrate that our low-cost device provided with the SCF completely ignores 100% of wrong availability data, while reducing up to 70% the number of records stored into the database.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Advances in smart roads for future smart cities

  • Toh, Chai K.
  • Sanguesa, Julio A.
  • Cano, Juan C.
  • Martinez, Francisco J.
Various countries throughout the world have started their efforts in designing and implementing smart cities. China alone has over 300 smart city projects, with strong participation by industries and government offices. India too have allocated trillions in budget to build over 100 smart cities. An essential part of a smart city is transport. In this paper, we will discuss the current state, developments, and some of the emerging advances in transportation technologies and how these advances in smart roads will prepare the society towards the realization of future smart cities.