Pasar al contenido principal

APROXIMACION MULTINIVEL AL DISEÑO ORIENTADO A LA FIABILIDAD DE CIRCUITOS INTEGRADOS ANALOGICOS Y DIGITALES

TEC2013-45638-C3-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Output Power and Gain Monitoring in RF CMOS Class A Power Amplifiers by Thermal Imaging

  • Perpiñà, Xavier
  • Reverter, Ferran
  • León, Javier
  • Barajas, Enrique
  • Vellvehi, Miquel
  • Jordà, Xavier
  • Altet, Josep
The viability of using off-chip single-shot imaging techniques for local thermal testing in integrated radio frequency (RF) power amplifiers (PAs) is analyzed. With this approach, the frequency response of the output power and power gain of a Class A RF PA is measured, also deriving information about the intrinsic operation of its transistors. To carry out this paper, the PA is heterodynally driven, and its electrical behavior is down converted into a lower frequency thermal field acquirable with an InfraRed lock-in thermography (IR-LIT) system. After discussing the theory, the feasibility of the proposed approach is demonstrated and assessed with thermal sensors monolithically integrated in the PA. As crucial advantages to RF-testing, this local approach is noninvasive and demands less complex instrumentation than the mainstream commercially available solutions., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental study of artificial neural networks using a digital memristor simulator

  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Vourkas, Ioannis
  • Abusleme, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fully digital implementation of a memristor hardware simulator, as the core of an emulator, based on a behavioral model of voltage-controlled threshold-type bipolar memristors. Compared to other analog solutions, the proposed digital design is compact, easily reconfigurable, demonstrates very good matching with the mathematical model on which it is based, and complies with all the required features for memristor emulators. We validated its functionality using Altera Quartus II and ModelSim tools targeting low-cost yet powerful field programmable gate array (FPGA) families. We tested its suitability for complex memristive circuits as well as its synapse functioning in artificial neural networks (ANNs), implementing examples of associative memory and unsupervised learning of spatio-temporal correlations in parallel input streams using a simplified STDP. We provide the full circuit schematics of all our digital circuit designs and comment on the required hardware resources and their scaling trends, thus presenting a design framework for applications based on our hardware simulator., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Crossbar-based memristive logic-in-memory architecture

  • Papandroulikadis, Georgios
  • Vourkas, Ioannis
  • Abustelema, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
The use of memristors and resistive random access memory (ReRAM) technology to perform logic computations, has drawn considerable attention from researchers in recent years. However, the topological aspects of the underlying ReRAM architecture and its organization have received less attention, as the focus has mainly been on device-specific properties for functionally complete logic gates through conditional switching in ReRAM circuits. A careful investigation and optimization of the target geometry is thus highly desirable for the implementation of logic-in-memory architectures. In this paper, we propose a crossbar-based in-memory parallel processing system in which, through the heterogeneity of the resistive cross-point devices, we achieve local information processing in a state-of-the-art ReRAM crossbar architecture with vertical group-accessed transistors as cross-point selector devices. We primarily focus on the array organization, information storage, and processing flow, while proposing a novel geometry for the cross-point selection lines to mitigate current sneak-paths during an arbitrary number of possible parallel logic computations. We prove the proper functioning and potential capabilities of the proposed architecture through SPICE-level circuit simulations of half-adder and sum-of-products logic functions. We compare certain features of the proposed logic-in-memory approach with another work of the literature, and present an analysis of circuit resources, integration density, and logic computation parallelism., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A versatile CMOS transistor array IC for the statistical characterization of time-zero variability, RTN, BTI, and HCI

  • Diaz Fortuny, Javier
  • Martin Martínez, Javier
  • Rodríguez Martínez, Rosana
  • Castro López, Rafael
  • Roca Moreno, Elisenda
  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Barajas Ojeda, Enrique|||0000-0002-2072-2268
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • Fernández Fernández, Francisco V.
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Statistical characterization of CMOS transistor variability phenomena in modern nanometer technologies is key for accurate end-of-life prediction. This paper presents a novel CMOS transistor array chip to statistically characterize the effects of several critical variability sources, such as time-zero variability (TZV), random telegraph noise (RTN), bias temperature instability (BTI), and hot-carrier injection (HCI). The chip integrates 3136 MOS transistors of both pMOS and nMOS types, with eight different sizes. The implemented architecture provides the chip with a high level of versatility, allowing all required tests and attaining the level of accuracy that the characterization of the above-mentioned variability effects requires. Another very important feature of the array is the capability of performing massively parallel aging testing, thus significantly cutting down the time for statistical characterization. The chip has been fabricated in a 1.2-V, 65-nm CMOS technology with a total chip area of 1800 x 1800 µm²., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Calomarde Palomino, Antonio|||0000-0002-4459-8505
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Resistive random access memory variability and its mitigation schemes

  • Pouman, Peyman
  • Amat Bertran, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
The need for design of new computing and storage paradigms has leaded to the emergence of new technologies and procedures. Among these technologies, emerging non-volatile memories such as RRAMs are getting intense attention due to their attractive characteristics such as scalability and CMOS friendly manufacturing. However, similar to any other new technology emergences, having reliability and high performance devices is a challenge, and innovative new techniques are required to make the products attractive and robust enough before entering into the semiconductor market. The research for such crucial reliability concerns and mitigation techniques are ongoing hot topic and the main motivation for this work. Therefore, in this paper, we have studied the origins of RRAM variability and reviewed some of the existing techniques to mitigate its effect at circuit level. To show the relevance of variability in RRAM memories we have further analyzed its impact in the Read/Write memory operation and have presented the memory unreliability that we measure by a parameter as probability of error can be 25% during the read operation and in presence of such resistance variations. In the next phase we have presented a conventional 1T1R memory architecture where we have proposed our reconfiguring strategies to extend the memory lifetime. These reconfiguration strategies utilize a monitoring technique, what we have implemented in order to measure the resistance ratios in RRAM memory cells. Such monitoring approach can detect the highly variability effected and differentiate the bad cells from the good cells; therefore, it can improve the overall RRAM memory reliability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental time evolution study of the HFO-based IMPLY gate operation

  • Maestro, M
  • Marin-Martinez, J.
  • Crespo-Yepes, A.
  • Escudero, Manel
  • Rodriguez, R.
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
  • Aymerich, X.
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the last years, memristor devices have been proposed as key elements to develop a new paradigm to implement logic gates. In particular, the memristor-based material implication (IMPLY) gate has been presented as a potential powerful basis for logic applications. In the literature, the IMPLY operation has been widely simulated but most of the efforts have been just focused on accomplishing its truth table, only considering the initial and final states of the gate. However, a complete understanding of the time evolution between states is still missing and barely reported yet. In this work, the time evolution of memristor involved in an IMPLY gate are studied in detail for every case of the gate. Furthermore, the impact on IMPLY gate operation of the internal resistor connected in series with the memristors of the IMPLY gate is included., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

DC temperature measurements to characterize the central frequency and 3 dB bandwidth in mmW power amplifiers

  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • González Jiménez, José Luis
  • Vidal López, Eva María|||0000-0001-8533-2271
  • Gómez Salinas, Didac
  • Martineau, B
  • Altet Sanahujes, Josep|||0000-0002-6939-6475
This letter shows how a temperature sensor and a simple DC voltage multimeter can be used as instruments to determine the central frequency and 3 dB bandwidth of a 60 GHz linear power amplifier (PA). Compared to previous works, the DC temperature monitoring now proposed requires a much simpler and convenient measurement set-up. In this example, the temperature sensor is embedded in the same silicon die as the PA. Being placed in empty layout spaces next to it, it is proposed as a built-in test circuit., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Resistive random access memory variability and its mitigation schemes

  • Pouman, Peyman
  • Amat Bertran, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio
The need for design of new computing and storage paradigms has leaded to the emergence of new technologies and procedures. Among these technologies, emerging non-volatile memories such as RRAMs are getting intense attention due to their attractive characteristics such as scalability and CMOS friendly manufacturing. However, similar to any other new technology emergences, having reliability and high performance devices is a challenge, and innovative new techniques are required to make the products attractive and robust enough before entering into the semiconductor market. The research for such crucial reliability concerns and mitigation techniques are ongoing hot topic and the main motivation for this work. Therefore, in this paper, we have studied the origins of RRAM variability and reviewed some of the existing techniques to mitigate its effect at circuit level. To show the relevance of variability in RRAM memories we have further analyzed its impact in the Read/Write memory operation and have presented the memory unreliability that we measure by a parameter as probability of error can be 25% during the read operation and in presence of such resistance variations. In the next phase we have presented a conventional 1T1R memory architecture where we have proposed our reconfiguring strategies to extend the memory lifetime. These reconfiguration strategies utilize a monitoring technique, what we have implemented in order to measure the resistance ratios in RRAM memory cells. Such monitoring approach can detect the highly variability effected and differentiate the bad cells from the good cells; therefore, it can improve the overall RRAM memory reliability., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A versatile CMOS transistor array IC for the statistical characterization of time-zero variability, RTN, BTI, and HCI

  • Diaz Fortuny, Javier
  • Martin Martínez, Javier
  • Rodríguez Martínez, Rosana
  • Castro López, Rafael
  • Roca Moreno, Elisenda
  • Aragonès Cervera, Xavier
  • Barajas Ojeda, Enrique
  • Mateo Peña, Diego
  • Fernández Fernández, Francisco V.
  • Nafría Maqueda, Montserrat
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Statistical characterization of CMOS transistor variability phenomena in modern nanometer technologies is key for accurate end-of-life prediction. This paper presents a novel CMOS transistor array chip to statistically characterize the effects of several critical variability sources, such as time-zero variability (TZV), random telegraph noise (RTN), bias temperature instability (BTI), and hot-carrier injection (HCI). The chip integrates 3136 MOS transistors of both pMOS and nMOS types, with eight different sizes. The implemented architecture provides the chip with a high level of versatility, allowing all required tests and attaining the level of accuracy that the characterization of the above-mentioned variability effects requires. Another very important feature of the array is the capability of performing massively parallel aging testing, thus significantly cutting down the time for statistical characterization. The chip has been fabricated in a 1.2-V, 65-nm CMOS technology with a total chip area of 1800 x 1800 µm²., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon
  • Calomarde Palomino, Antonio
  • Rubio Sola, Jose Antonio
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

DC temperature measurements to characterize the central frequency and 3 dB bandwidth in mmW power amplifiers

  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • González Jiménez, José Luis
  • Vidal López, Eva María
  • Gómez Salinas, Didac
  • Martineau, B
  • Altet Sanahujes, Josep
This letter shows how a temperature sensor and a simple DC voltage multimeter can be used as instruments to determine the central frequency and 3 dB bandwidth of a 60 GHz linear power amplifier (PA). Compared to previous works, the DC temperature monitoring now proposed requires a much simpler and convenient measurement set-up. In this example, the temperature sensor is embedded in the same silicon die as the PA. Being placed in empty layout spaces next to it, it is proposed as a built-in test circuit., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental time evolution study of the HFO-based IMPLY gate operation

  • Maestro, M
  • Marin-Martinez, J.
  • Crespo-Yepes, A.
  • Escudero, Manel
  • Rodriguez, R.
  • Nafría Maqueda, Montserrat
  • Aymerich, X.
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the last years, memristor devices have been proposed as key elements to develop a new paradigm to implement logic gates. In particular, the memristor-based material implication (IMPLY) gate has been presented as a potential powerful basis for logic applications. In the literature, the IMPLY operation has been widely simulated but most of the efforts have been just focused on accomplishing its truth table, only considering the initial and final states of the gate. However, a complete understanding of the time evolution between states is still missing and barely reported yet. In this work, the time evolution of memristor involved in an IMPLY gate are studied in detail for every case of the gate. Furthermore, the impact on IMPLY gate operation of the internal resistor connected in series with the memristors of the IMPLY gate is included., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study of artificial neural networks using a digital memristor simulator

  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Abusleme, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fully digital implementation of a memristor hardware simulator, as the core of an emulator, based on a behavioral model of voltage-controlled threshold-type bipolar memristors. Compared to other analog solutions, the proposed digital design is compact, easily reconfigurable, demonstrates very good matching with the mathematical model on which it is based, and complies with all the required features for memristor emulators. We validated its functionality using Altera Quartus II and ModelSim tools targeting low-cost yet powerful field programmable gate array (FPGA) families. We tested its suitability for complex memristive circuits as well as its synapse functioning in artificial neural networks (ANNs), implementing examples of associative memory and unsupervised learning of spatio-temporal correlations in parallel input streams using a simplified STDP. We provide the full circuit schematics of all our digital circuit designs and comment on the required hardware resources and their scaling trends, thus presenting a design framework for applications based on our hardware simulator., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Crossbar-based memristive logic-in-memory architecture

  • Papandroulikadis, Georgios
  • Vourkas, Ioannis
  • Abustelema, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio
The use of memristors and resistive random access memory (ReRAM) technology to perform logic computations, has drawn considerable attention from researchers in recent years. However, the topological aspects of the underlying ReRAM architecture and its organization have received less attention, as the focus has mainly been on device-specific properties for functionally complete logic gates through conditional switching in ReRAM circuits. A careful investigation and optimization of the target geometry is thus highly desirable for the implementation of logic-in-memory architectures. In this paper, we propose a crossbar-based in-memory parallel processing system in which, through the heterogeneity of the resistive cross-point devices, we achieve local information processing in a state-of-the-art ReRAM crossbar architecture with vertical group-accessed transistors as cross-point selector devices. We primarily focus on the array organization, information storage, and processing flow, while proposing a novel geometry for the cross-point selection lines to mitigate current sneak-paths during an arbitrary number of possible parallel logic computations. We prove the proper functioning and potential capabilities of the proposed architecture through SPICE-level circuit simulations of half-adder and sum-of-products logic functions. We compare certain features of the proposed logic-in-memory approach with another work of the literature, and present an analysis of circuit resources, integration density, and logic computation parallelism., Peer Reviewed, Postprint (author's final draft)