Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring strategies to contact 3D nano-pillars

  • Amat, Esteve
  • Moral, Alberto del
  • Fernández-Regúlez, Marta
  • Evangelio, Laura
  • Lorenzoni, Matteo
  • Gharbi, Ahmed
  • Rademaker, Guido
  • Pourteau, Marie-Line
  • Tiron, Raluca
  • Bausells, Joan
  • Perez Murano, Francesc X.
This contribution explores different strategies to electrically contact vertical pillars with diameters less than 100 nm. Two process strategies have been defined, the first based on Atomic Force Microscope (AFM) indentation and the second based on planarization and reactive ion etching (RIE). We have demonstrated that both proposals provide suitable contacts. The results help to conclude that the most feasible strategy to be implementable is the one using planarization and reactive ion etching since it is more suitable for parallel and/or high-volume manufacturing processing., This work received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 688072 (Ions4SET), by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos, TEC2015-69864-R and RTI2018-102007-B-I00 and by the Generalitat de Catalunya (2017 SGR 1187). This work made use of the Spanish ICTS Network MICRONANOFABS, partially supported by MEINCOM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CMOS-compatible manufacturability of sub-15 nm Si/SiO<inf>2</inf>/Si nanopillars containing single Si nanodots for single electron transistor applications

  • von Borany, J.
  • Engelmann, H. J.
  • Heinig, K. H.
  • Amat, Esteve
  • Hlawacek, G.
  • Klüpfel, F.
  • Hübner, R.
  • Möller, W.
  • Pourteau, M. L.
  • Rademaker, G.
  • Rommel, M.
  • Baier, L.
  • Pichler, P.
  • Perez Murano, Francesc X.
  • Tiron, R.
This study addresses the complementary metal-oxide-semiconductor-compatible fabrication of vertically stacked Si/SiO2/Si nanopillars (NPs) with embedded Si nanodots (NDs) as key functional elements of a quantum-dot-based, gate-all-around single-electron transistor (SET) operating at room temperature. The main geometrical parameters of the NPs and NDs were deduced from SET device simulations using the nextnano++ program package. The basic concept for single silicon ND formation within a confined oxide volume was deduced from Monte-Carlo simulations of ion-beam mixing and SiO x phase separation. A process flow was developed and experimentally implemented by combining bottom-up (Si ND self-assembly) and top-down (ion-beam mixing, electron-beam lithography, reactive ion etching) technologies, fully satisfying process requirements of future 3D device architectures. The theoretically predicted self-assembly of a single Si ND via phase separation within a confined SiO x disc of <500 nm3 volume was experimentally validated. This work describes in detail the optimization of conditions required for NP/ND formation, such as the oxide thickness, energy and fluence of ion-beam mixing, thermal budget for phase separation and parameters of reactive ion beam etching. Low-temperature plasma oxidation was used to further reduce NP diameter and for gate oxide fabrication whilst preserving the pre-existing NDs. The influence of critical dimension variability on the SET functionality and options to reduce such deviations are discussed. We finally demonstrate the reliable formation of Si quantum dots with diameters of less than 3 nm in the oxide layer of a stacked Si/SiO2/Si NP of 10 nm diameter, with tunnelling distances of about 1 nm between the Si ND and the neighboured Si regions forming drain and source of the SET., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Calomarde Palomino, Antonio|||0000-0002-4459-8505
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon
  • Calomarde Palomino, Antonio
  • Rubio Sola, Jose Antonio
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed, Postprint (author's final draft)