Pasar al contenido principal

APROXIMACION MULTINIVEL AL DISEÑO ORIENTADO A LA FIABILIDAD DE CIRCUITOS INTEGRADOS ANALOGICOS Y DIGITALES

TEC2013-45638-C3-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Output Power and Gain Monitoring in RF CMOS Class A Power Amplifiers by Thermal Imaging

  • Perpiñà, Xavier
  • Reverter, Ferran
  • León, Javier
  • Barajas, Enrique
  • Vellvehi, Miquel
  • Jordà, Xavier
  • Altet, Josep
The viability of using off-chip single-shot imaging techniques for local thermal testing in integrated radio frequency (RF) power amplifiers (PAs) is analyzed. With this approach, the frequency response of the output power and power gain of a Class A RF PA is measured, also deriving information about the intrinsic operation of its transistors. To carry out this paper, the PA is heterodynally driven, and its electrical behavior is down converted into a lower frequency thermal field acquirable with an InfraRed lock-in thermography (IR-LIT) system. After discussing the theory, the feasibility of the proposed approach is demonstrated and assessed with thermal sensors monolithically integrated in the PA. As crucial advantages to RF-testing, this local approach is noninvasive and demands less complex instrumentation than the mainstream commercially available solutions., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental study of artificial neural networks using a digital memristor simulator

  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Vourkas, Ioannis
  • Abusleme, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fully digital implementation of a memristor hardware simulator, as the core of an emulator, based on a behavioral model of voltage-controlled threshold-type bipolar memristors. Compared to other analog solutions, the proposed digital design is compact, easily reconfigurable, demonstrates very good matching with the mathematical model on which it is based, and complies with all the required features for memristor emulators. We validated its functionality using Altera Quartus II and ModelSim tools targeting low-cost yet powerful field programmable gate array (FPGA) families. We tested its suitability for complex memristive circuits as well as its synapse functioning in artificial neural networks (ANNs), implementing examples of associative memory and unsupervised learning of spatio-temporal correlations in parallel input streams using a simplified STDP. We provide the full circuit schematics of all our digital circuit designs and comment on the required hardware resources and their scaling trends, thus presenting a design framework for applications based on our hardware simulator., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Statistical characterization and modeling of random telegraph noise effects in 65nm SRAM cells

  • Martinez, Javier
  • Rodriguez, Rosa
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
  • Torrents, Gabriel
  • Bota, Sebastian A .
  • Segura, Jaume
  • Moll Echeto, Francisco de Borja|||0000-0002-1290-3253
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
Random Telegraph Noise (RTN) effects are investigated in 65nm SRAM cells by using a new characterization method that provides a significant measurement time reduction. The variability induced in commercial SRAM cells is derived by applying statistical and physics based Montecarlo modeling to the experimental data. Results show that RTN can have a significant impact on the memory write operations and should therefore be taken into account during the memory design phase, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Crossbar-based memristive logic-in-memory architecture

  • Papandroulikadis, Georgios
  • Vourkas, Ioannis
  • Abustelema, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
The use of memristors and resistive random access memory (ReRAM) technology to perform logic computations, has drawn considerable attention from researchers in recent years. However, the topological aspects of the underlying ReRAM architecture and its organization have received less attention, as the focus has mainly been on device-specific properties for functionally complete logic gates through conditional switching in ReRAM circuits. A careful investigation and optimization of the target geometry is thus highly desirable for the implementation of logic-in-memory architectures. In this paper, we propose a crossbar-based in-memory parallel processing system in which, through the heterogeneity of the resistive cross-point devices, we achieve local information processing in a state-of-the-art ReRAM crossbar architecture with vertical group-accessed transistors as cross-point selector devices. We primarily focus on the array organization, information storage, and processing flow, while proposing a novel geometry for the cross-point selection lines to mitigate current sneak-paths during an arbitrary number of possible parallel logic computations. We prove the proper functioning and potential capabilities of the proposed architecture through SPICE-level circuit simulations of half-adder and sum-of-products logic functions. We compare certain features of the proposed logic-in-memory approach with another work of the literature, and present an analysis of circuit resources, integration density, and logic computation parallelism., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A versatile CMOS transistor array IC for the statistical characterization of time-zero variability, RTN, BTI, and HCI

  • Diaz Fortuny, Javier
  • Martin Martínez, Javier
  • Rodríguez Martínez, Rosana
  • Castro López, Rafael
  • Roca Moreno, Elisenda
  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Barajas Ojeda, Enrique|||0000-0002-2072-2268
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • Fernández Fernández, Francisco V.
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Statistical characterization of CMOS transistor variability phenomena in modern nanometer technologies is key for accurate end-of-life prediction. This paper presents a novel CMOS transistor array chip to statistically characterize the effects of several critical variability sources, such as time-zero variability (TZV), random telegraph noise (RTN), bias temperature instability (BTI), and hot-carrier injection (HCI). The chip integrates 3136 MOS transistors of both pMOS and nMOS types, with eight different sizes. The implemented architecture provides the chip with a high level of versatility, allowing all required tests and attaining the level of accuracy that the characterization of the above-mentioned variability effects requires. Another very important feature of the array is the capability of performing massively parallel aging testing, thus significantly cutting down the time for statistical characterization. The chip has been fabricated in a 1.2-V, 65-nm CMOS technology with a total chip area of 1800 x 1800 µm²., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Calomarde Palomino, Antonio|||0000-0002-4459-8505
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Statistical lifetime analysis of memristive crossbar matrix

  • Pouyan, Peyman
  • Amat, Esteve
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
Memristors are considered one of the most favorable emerging device alternatives for future memory technologies. They are attracting great attention recently, due to their high scalability and compatibility with CMOS fabrication process. Alongside their benefits, they also face reliability concerns (e.g. manufacturing variability). In this sense our work analyzes key sources of uncertainties in the operation of the memristive memory and we present an analytic approach to predict the expected lifetime distribution of a memristive crossbar.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Coupled physarum-inspired memristor oscillators for neuron-like operations

  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Adamatzky, Andrew
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unconventional computing has been studied intensively, even after the appearance of CMOS technology. Currently, it has returned to the spotlight because CMOS is about to reach its physical limits, given that the constant demand for more computational power requires for novel unconventional computing solutions. In this area, the oscillatory internal motion mechanism of slime mould, namely Physarum Polycephalum, could serve as an alternative concept for the design and development of electronic circuits that exploit the memristive dynamics and simple LC contours to deliver solutions for computationally hard to be solved problems. In this direction, this work presents how bio-inspired memristive LC oscillators with a coupling capacitor can be synchronized to perform the functionalities of a biological neuron, also able to execute more complex computations, aiming to model biological neural systems much more advanced than the neuron-less slime mould biological organism. This work proposes a connection between the function mechanism of a simple biological organism and that of complex biological systems, made in a plausible and sufficient manner, towards unconventional computation with memristors., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploring the voltage divider approach for accurate memristor state tuning

  • Vourkas, Ioannis
  • Gomez, Jorge
  • Abusleme, Angel
  • Vasileiadis, Nikolaos
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
The maximum exploitation of the favorable properties and the analog nature of memristor technology in future nonvolatile resistive memories, requires accurate multilevel programming. In this direction, we explore the voltage divider (VD) approach for highly controllable multi-state SET memristor tuning. We present the theoretical basis of operation, the main advantages and weaknesses. We finally propose an improved closed-loop VD SET scheme to tackle the variability effect and achieve <1% tuning precision, on average 3× faster than another accurate tuning algorithm of the recent literature., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Resistive random access memory variability and its mitigation schemes

  • Pouman, Peyman
  • Amat Bertran, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
The need for design of new computing and storage paradigms has leaded to the emergence of new technologies and procedures. Among these technologies, emerging non-volatile memories such as RRAMs are getting intense attention due to their attractive characteristics such as scalability and CMOS friendly manufacturing. However, similar to any other new technology emergences, having reliability and high performance devices is a challenge, and innovative new techniques are required to make the products attractive and robust enough before entering into the semiconductor market. The research for such crucial reliability concerns and mitigation techniques are ongoing hot topic and the main motivation for this work. Therefore, in this paper, we have studied the origins of RRAM variability and reviewed some of the existing techniques to mitigate its effect at circuit level. To show the relevance of variability in RRAM memories we have further analyzed its impact in the Read/Write memory operation and have presented the memory unreliability that we measure by a parameter as probability of error can be 25% during the read operation and in presence of such resistance variations. In the next phase we have presented a conventional 1T1R memory architecture where we have proposed our reconfiguring strategies to extend the memory lifetime. These reconfiguration strategies utilize a monitoring technique, what we have implemented in order to measure the resistance ratios in RRAM memory cells. Such monitoring approach can detect the highly variability effected and differentiate the bad cells from the good cells; therefore, it can improve the overall RRAM memory reliability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Aging in CMOS RF linear power amplifiers: experimental comparison and modeling

  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • Barajas Ojeda, Enrique|||0000-0002-2072-2268
  • Crespo-Yepes, A.
  • Rodríguez Martínez, Rosana
  • Martin Martínez, Javier
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
This paper characterizes experimentally the aging degradation experienced by two different 2.45 GHz power amplifier circuits of similar performance, implemented in a 65 nm CMOS technology. Results demonstrate the importance of the topology selection in order to guarantee robustness against aging effects, and thus the need to predict MOS parameter degradation during the design phase, accounting for the actual DC and RF operation conditions. For that purpose, we propose a semi-empirical compact model that, based on the RMS equivalent voltages at the transistor terminals during circuit operation, can provide an estimation of the aging degradation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An on-line test strategy and analysis for a 1T1R crossbar memory

  • Escudero, Manel
  • Moll Echeto, Francisco de Borja|||0000-0002-1290-3253
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Vourkas, Ioannis
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Memristors are emerging devices known by their nonvolability, compatibility with CMOS processes and high density in circuits density in circuits mostly owing to the crossbar nanoarchitecture. One of their most notable applications is in the memory system field. Despite their promising characteristics and the advancements in this emerging technology, variability and reliability are still principal issues for memristors. For these reasons, exploring techniques that check the integrity of circuits is of primary importance. Therefore, this paper proposes a method to perform an on-line test capable to detect a single failure inside the memory crossbar array., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental time evolution study of the HFO-based IMPLY gate operation

  • Maestro, M
  • Marin-Martinez, J.
  • Crespo-Yepes, A.
  • Escudero, Manel
  • Rodriguez, R.
  • Nafría Maqueda, Montserrat|||0000-0002-9549-2890
  • Aymerich, X.
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the last years, memristor devices have been proposed as key elements to develop a new paradigm to implement logic gates. In particular, the memristor-based material implication (IMPLY) gate has been presented as a potential powerful basis for logic applications. In the literature, the IMPLY operation has been widely simulated but most of the efforts have been just focused on accomplishing its truth table, only considering the initial and final states of the gate. However, a complete understanding of the time evolution between states is still missing and barely reported yet. In this work, the time evolution of memristor involved in an IMPLY gate are studied in detail for every case of the gate. Furthermore, the impact on IMPLY gate operation of the internal resistor connected in series with the memristors of the IMPLY gate is included., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Modem gain-cell memories in advanced technologies

  • Amat Bertran, Esteve
  • Canal Corretger, Ramon|||0000-0003-4542-204X
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
With the advent of the slowdown in DRAM capacitor scaling [1] and the increased reliability problems of traditional 6T SRAM memories [2], industry and academia have looked for alternative memory cells. Among those, gain- cells have attracted significant attention due to their smaller size (compared to SRAM) and non-destructive read operation (compared to DRAM) as well as considerable low power and reasonable robustness. This paper first summarizes the available evidences of SRAM and eDRAM in commercial and test chips. Then, it analyzes the performance, reliability and scaling of eDRAM gain-cells in 10 and 7 nm FinFET technology; as well as above and below VT (i.e. sub-threshold)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

DC temperature measurements to characterize the central frequency and 3 dB bandwidth in mmW power amplifiers

  • Aragonès Cervera, Xavier|||0000-0003-1352-8675
  • Mateo Peña, Diego|||0000-0001-5996-9092
  • González Jiménez, José Luis
  • Vidal López, Eva María|||0000-0001-8533-2271
  • Gómez Salinas, Didac
  • Martineau, B
  • Altet Sanahujes, Josep|||0000-0002-6939-6475
This letter shows how a temperature sensor and a simple DC voltage multimeter can be used as instruments to determine the central frequency and 3 dB bandwidth of a 60 GHz linear power amplifier (PA). Compared to previous works, the DC temperature monitoring now proposed requires a much simpler and convenient measurement set-up. In this example, the temperature sensor is embedded in the same silicon die as the PA. Being placed in empty layout spaces next to it, it is proposed as a built-in test circuit., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Reliability issues in RRAM ternary memories affected by variability and aging mechanisms

  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
  • Escudero, Manuel
  • Pouyan, Peyman
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Resistive switching Random Access Memories (RRAM) are being considered as a promising alternative for conventional memories mainly due to their high speed, scalability, CMOS compatibility, Non-Volatile behavior (NVM), and consequent orientation to low power consumption. Advances in the RRAM technology as well as enhancement of the control of the cells are opening the use of these devices for multi-valued logic. But the cycle-to-cycle variability and the still reduced endurance are becoming serious limitations. This paper analyzes the impact of both mechanisms on 1T1R cells and suggests potential adaptive mechanisms to enlarge its lifetime., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

RRAM variability and its mitigation schemes

  • Pouman, Peyman
  • Amat, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
Emerging technologies such as RRAMs are attracting significant attention due to their tempting characteristics such as high scalability, CMOS compatibility and non-volatility to replace the current conventional memories. However, critical causes of hardware reliability failures, such as process variation due to their nano-scale structure have gained considerable importance for acceptable memory yields. Such vulnerabilities make it essential to investigate new robust design strategies at the circuit system level. In this paper we have analyzed the RRAM variability phenomenon, its impact and variation tolerant techniques at the circuit level. Finally a variation-monitoring circuit is presented that discerns the reliable memory cells affected by process variability., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Memristive cellular automata for modeling of epileptic brain activity

  • Karamani, Rafallia
  • Fyrigos, Iosif
  • Ntinas, Vasileios|||0000-0002-2367-5567
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Rubio Sola, Jose Antonio|||0000-0003-1625-1472
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Cellular Automata (CA) is a nature-inspired and widespread computational model which is based on the collective and emergent parallel computing capability of units (cells) locally interconnected in an abstract brain-like structure. Each such unit, referred as CA cell, performs simplistic computations/processes. However, a network of such identical cells can exhibit nonlinear behavior and be used to model highly complex physical phenomena and processes and to solve problems that are highly complicated for conventional computers. Brain activity has always been considered one of the most complex physical processes and its modeling is of utter importance. This work combines the CA parallel computing capability with the nonlinear dynamics of the memristor, aiming to model brain activity during the epileptic seizures caused by the spreading of pathological dynamics from focal to healthy brain regions. A CA-based confrontation extended to include long-range interactions, combined with the recent notion of memristive electronics, is thus proposed as a modern and promising parallel approach to modeling of such complex physical phenomena. Simulation results show the efficiency of the proposed design and the appropriate reproduction of the spreading of an epileptic seizure., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Modem gain-cell memories in advanced technologies

  • Amat Bertran, Esteve
  • Canal Corretger, Ramon
  • Rubio Sola, Jose Antonio
With the advent of the slowdown in DRAM capacitor scaling [1] and the increased reliability problems of traditional 6T SRAM memories [2], industry and academia have looked for alternative memory cells. Among those, gain- cells have attracted significant attention due to their smaller size (compared to SRAM) and non-destructive read operation (compared to DRAM) as well as considerable low power and reasonable robustness. This paper first summarizes the available evidences of SRAM and eDRAM in commercial and test chips. Then, it analyzes the performance, reliability and scaling of eDRAM gain-cells in 10 and 7 nm FinFET technology; as well as above and below VT (i.e. sub-threshold)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Resistive random access memory variability and its mitigation schemes

  • Pouman, Peyman
  • Amat Bertran, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio
The need for design of new computing and storage paradigms has leaded to the emergence of new technologies and procedures. Among these technologies, emerging non-volatile memories such as RRAMs are getting intense attention due to their attractive characteristics such as scalability and CMOS friendly manufacturing. However, similar to any other new technology emergences, having reliability and high performance devices is a challenge, and innovative new techniques are required to make the products attractive and robust enough before entering into the semiconductor market. The research for such crucial reliability concerns and mitigation techniques are ongoing hot topic and the main motivation for this work. Therefore, in this paper, we have studied the origins of RRAM variability and reviewed some of the existing techniques to mitigate its effect at circuit level. To show the relevance of variability in RRAM memories we have further analyzed its impact in the Read/Write memory operation and have presented the memory unreliability that we measure by a parameter as probability of error can be 25% during the read operation and in presence of such resistance variations. In the next phase we have presented a conventional 1T1R memory architecture where we have proposed our reconfiguring strategies to extend the memory lifetime. These reconfiguration strategies utilize a monitoring technique, what we have implemented in order to measure the resistance ratios in RRAM memory cells. Such monitoring approach can detect the highly variability effected and differentiate the bad cells from the good cells; therefore, it can improve the overall RRAM memory reliability., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reliability issues in RRAM ternary memories affected by variability and aging mechanisms

  • Rubio Sola, Jose Antonio
  • Escudero, Manuel
  • Pouyan, Peyman
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Resistive switching Random Access Memories (RRAM) are being considered as a promising alternative for conventional memories mainly due to their high speed, scalability, CMOS compatibility, Non-Volatile behavior (NVM), and consequent orientation to low power consumption. Advances in the RRAM technology as well as enhancement of the control of the cells are opening the use of these devices for multi-valued logic. But the cycle-to-cycle variability and the still reduced endurance are becoming serious limitations. This paper analyzes the impact of both mechanisms on 1T1R cells and suggests potential adaptive mechanisms to enlarge its lifetime., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A versatile CMOS transistor array IC for the statistical characterization of time-zero variability, RTN, BTI, and HCI

  • Diaz Fortuny, Javier
  • Martin Martínez, Javier
  • Rodríguez Martínez, Rosana
  • Castro López, Rafael
  • Roca Moreno, Elisenda
  • Aragonès Cervera, Xavier
  • Barajas Ojeda, Enrique
  • Mateo Peña, Diego
  • Fernández Fernández, Francisco V.
  • Nafría Maqueda, Montserrat
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Statistical characterization of CMOS transistor variability phenomena in modern nanometer technologies is key for accurate end-of-life prediction. This paper presents a novel CMOS transistor array chip to statistically characterize the effects of several critical variability sources, such as time-zero variability (TZV), random telegraph noise (RTN), bias temperature instability (BTI), and hot-carrier injection (HCI). The chip integrates 3136 MOS transistors of both pMOS and nMOS types, with eight different sizes. The implemented architecture provides the chip with a high level of versatility, allowing all required tests and attaining the level of accuracy that the characterization of the above-mentioned variability effects requires. Another very important feature of the array is the capability of performing massively parallel aging testing, thus significantly cutting down the time for statistical characterization. The chip has been fabricated in a 1.2-V, 65-nm CMOS technology with a total chip area of 1800 x 1800 µm²., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An on-line test strategy and analysis for a 1T1R crossbar memory

  • Escudero, Manel
  • Moll Echeto, Francisco de Borja
  • Rubio Sola, Jose Antonio
  • Vourkas, Ioannis
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Memristors are emerging devices known by their nonvolability, compatibility with CMOS processes and high density in circuits density in circuits mostly owing to the crossbar nanoarchitecture. One of their most notable applications is in the memory system field. Despite their promising characteristics and the advancements in this emerging technology, variability and reliability are still principal issues for memristors. For these reasons, exploring techniques that check the integrity of circuits is of primary importance. Therefore, this paper proposes a method to perform an on-line test capable to detect a single failure inside the memory crossbar array., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review on suitable eDRAM configurations for next nano-metric electronics era

  • Amat, Esteve
  • Canal Corretger, Ramon
  • Calomarde Palomino, Antonio
  • Rubio Sola, Jose Antonio
We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Statistical lifetime analysis of memristive crossbar matrix

  • Pouyan, Peyman
  • Amat, Esteve
  • Rubio Sola, Jose Antonio
Memristors are considered one of the most favorable emerging device alternatives for future memory technologies. They are attracting great attention recently, due to their high scalability and compatibility with CMOS fabrication process. Alongside their benefits, they also face reliability concerns (e.g. manufacturing variability). In this sense our work analyzes key sources of uncertainties in the operation of the memristive memory and we present an analytic approach to predict the expected lifetime distribution of a memristive crossbar., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploring the voltage divider approach for accurate memristor state tuning

  • Vourkas, Ioannis
  • Gomez, Jorge
  • Abusleme, Angel
  • Vasileiadis, Nikolaos
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio
The maximum exploitation of the favorable properties and the analog nature of memristor technology in future nonvolatile resistive memories, requires accurate multilevel programming. In this direction, we explore the voltage divider (VD) approach for highly controllable multi-state SET memristor tuning. We present the theoretical basis of operation, the main advantages and weaknesses. We finally propose an improved closed-loop VD SET scheme to tackle the variability effect and achieve <1% tuning precision, on average 3× faster than another accurate tuning algorithm of the recent literature., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

DC temperature measurements to characterize the central frequency and 3 dB bandwidth in mmW power amplifiers

  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • González Jiménez, José Luis
  • Vidal López, Eva María
  • Gómez Salinas, Didac
  • Martineau, B
  • Altet Sanahujes, Josep
This letter shows how a temperature sensor and a simple DC voltage multimeter can be used as instruments to determine the central frequency and 3 dB bandwidth of a 60 GHz linear power amplifier (PA). Compared to previous works, the DC temperature monitoring now proposed requires a much simpler and convenient measurement set-up. In this example, the temperature sensor is embedded in the same silicon die as the PA. Being placed in empty layout spaces next to it, it is proposed as a built-in test circuit., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Coupled physarum-inspired memristor oscillators for neuron-like operations

  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Adamatzky, Andrew
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unconventional computing has been studied intensively, even after the appearance of CMOS technology. Currently, it has returned to the spotlight because CMOS is about to reach its physical limits, given that the constant demand for more computational power requires for novel unconventional computing solutions. In this area, the oscillatory internal motion mechanism of slime mould, namely Physarum Polycephalum, could serve as an alternative concept for the design and development of electronic circuits that exploit the memristive dynamics and simple LC contours to deliver solutions for computationally hard to be solved problems. In this direction, this work presents how bio-inspired memristive LC oscillators with a coupling capacitor can be synchronized to perform the functionalities of a biological neuron, also able to execute more complex computations, aiming to model biological neural systems much more advanced than the neuron-less slime mould biological organism. This work proposes a connection between the function mechanism of a simple biological organism and that of complex biological systems, made in a plausible and sufficient manner, towards unconventional computation with memristors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Memristive cellular automata for modeling of epileptic brain activity

  • Karamani, Rafallia
  • Fyrigos, Iosif
  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Sirakoulis, Georgios Ch.
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Cellular Automata (CA) is a nature-inspired and widespread computational model which is based on the collective and emergent parallel computing capability of units (cells) locally interconnected in an abstract brain-like structure. Each such unit, referred as CA cell, performs simplistic computations/processes. However, a network of such identical cells can exhibit nonlinear behavior and be used to model highly complex physical phenomena and processes and to solve problems that are highly complicated for conventional computers. Brain activity has always been considered one of the most complex physical processes and its modeling is of utter importance. This work combines the CA parallel computing capability with the nonlinear dynamics of the memristor, aiming to model brain activity during the epileptic seizures caused by the spreading of pathological dynamics from focal to healthy brain regions. A CA-based confrontation extended to include long-range interactions, combined with the recent notion of memristive electronics, is thus proposed as a modern and promising parallel approach to modeling of such complex physical phenomena. Simulation results show the efficiency of the proposed design and the appropriate reproduction of the spreading of an epileptic seizure., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental time evolution study of the HFO-based IMPLY gate operation

  • Maestro, M
  • Marin-Martinez, J.
  • Crespo-Yepes, A.
  • Escudero, Manel
  • Rodriguez, R.
  • Nafría Maqueda, Montserrat
  • Aymerich, X.
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the last years, memristor devices have been proposed as key elements to develop a new paradigm to implement logic gates. In particular, the memristor-based material implication (IMPLY) gate has been presented as a potential powerful basis for logic applications. In the literature, the IMPLY operation has been widely simulated but most of the efforts have been just focused on accomplishing its truth table, only considering the initial and final states of the gate. However, a complete understanding of the time evolution between states is still missing and barely reported yet. In this work, the time evolution of memristor involved in an IMPLY gate are studied in detail for every case of the gate. Furthermore, the impact on IMPLY gate operation of the internal resistor connected in series with the memristors of the IMPLY gate is included., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

RRAM variability and its mitigation schemes

  • Pouman, Peyman
  • Amat, Esteve
  • Hamdioui, Said
  • Rubio Sola, Jose Antonio
Emerging technologies such as RRAMs are attracting significant attention due to their tempting characteristics such as high scalability, CMOS compatibility and non-volatility to replace the current conventional memories. However, critical causes of hardware reliability failures, such as process variation due to their nano-scale structure have gained considerable importance for acceptable memory yields. Such vulnerabilities make it essential to investigate new robust design strategies at the circuit system level. In this paper we have analyzed the RRAM variability phenomenon, its impact and variation tolerant techniques at the circuit level. Finally a variation-monitoring circuit is presented that discerns the reliable memory cells affected by process variability., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental study of artificial neural networks using a digital memristor simulator

  • Ntinas, Vasileios
  • Vourkas, Ioannis
  • Abusleme, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fully digital implementation of a memristor hardware simulator, as the core of an emulator, based on a behavioral model of voltage-controlled threshold-type bipolar memristors. Compared to other analog solutions, the proposed digital design is compact, easily reconfigurable, demonstrates very good matching with the mathematical model on which it is based, and complies with all the required features for memristor emulators. We validated its functionality using Altera Quartus II and ModelSim tools targeting low-cost yet powerful field programmable gate array (FPGA) families. We tested its suitability for complex memristive circuits as well as its synapse functioning in artificial neural networks (ANNs), implementing examples of associative memory and unsupervised learning of spatio-temporal correlations in parallel input streams using a simplified STDP. We provide the full circuit schematics of all our digital circuit designs and comment on the required hardware resources and their scaling trends, thus presenting a design framework for applications based on our hardware simulator., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Crossbar-based memristive logic-in-memory architecture

  • Papandroulikadis, Georgios
  • Vourkas, Ioannis
  • Abustelema, Angel
  • Sirakoulis, Georgios
  • Rubio Sola, Jose Antonio
The use of memristors and resistive random access memory (ReRAM) technology to perform logic computations, has drawn considerable attention from researchers in recent years. However, the topological aspects of the underlying ReRAM architecture and its organization have received less attention, as the focus has mainly been on device-specific properties for functionally complete logic gates through conditional switching in ReRAM circuits. A careful investigation and optimization of the target geometry is thus highly desirable for the implementation of logic-in-memory architectures. In this paper, we propose a crossbar-based in-memory parallel processing system in which, through the heterogeneity of the resistive cross-point devices, we achieve local information processing in a state-of-the-art ReRAM crossbar architecture with vertical group-accessed transistors as cross-point selector devices. We primarily focus on the array organization, information storage, and processing flow, while proposing a novel geometry for the cross-point selection lines to mitigate current sneak-paths during an arbitrary number of possible parallel logic computations. We prove the proper functioning and potential capabilities of the proposed architecture through SPICE-level circuit simulations of half-adder and sum-of-products logic functions. We compare certain features of the proposed logic-in-memory approach with another work of the literature, and present an analysis of circuit resources, integration density, and logic computation parallelism., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Statistical characterization and modeling of random telegraph noise effects in 65nm SRAM cells

  • Martinez, Javier
  • Rodriguez, Rosa
  • Nafría Maqueda, Montserrat
  • Torrents, Gabriel
  • Bota, Sebastian A .
  • Segura, Jaume
  • Moll Echeto, Francisco de Borja
  • Rubio Sola, Jose Antonio
Random Telegraph Noise (RTN) effects are investigated in 65nm SRAM cells by using a new characterization method that provides a significant measurement time reduction. The variability induced in commercial SRAM cells is derived by applying statistical and physics based Montecarlo modeling to the experimental data. Results show that RTN can have a significant impact on the memory write operations and should therefore be taken into account during the memory design phase, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Aging in CMOS RF linear power amplifiers: experimental comparison and modeling

  • Aragonès Cervera, Xavier
  • Mateo Peña, Diego
  • Barajas Ojeda, Enrique
  • Crespo-Yepes, A.
  • Rodríguez Martínez, Rosana
  • Martin Martínez, Javier
  • Nafría Maqueda, Montserrat
This paper characterizes experimentally the aging degradation experienced by two different 2.45 GHz power amplifier circuits of similar performance, implemented in a 65 nm CMOS technology. Results demonstrate the importance of the topology selection in order to guarantee robustness against aging effects, and thus the need to predict MOS parameter degradation during the design phase, accounting for the actual DC and RF operation conditions. For that purpose, we propose a semi-empirical compact model that, based on the RMS equivalent voltages at the transistor terminals during circuit operation, can provide an estimation of the aging degradation., Peer Reviewed, Postprint (published version)