Pasar al contenido principal

SENSORES DE FIBRA OPTICA PARA SEGURIDAD Y PROTECCION

TEC2013-47264-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Compound Lasing Fiber Optic Ring Resonators for Sensor Sensitivity Enhancement

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this study, a new method for increasing simultaneously the sensitivity and interrogation stability of fiber-optic intensity sensors is presented. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is widely improved by creating an external lasing ring resonator with matched spectral response. The combination of the wavelength selective response of the ring resonator and optical amplification from Er-doped fiber amplifier is used to create different fiber lasers. The resulting lasers present an impressive sensitivity enhancement and a dynamic range increment up to 15 dB. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on tunable laser interrogation, our method is >100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sidelobe apodization in optical pulse compression reflectometry for fiber optic distributed acoustic sensing

  • Mompó, J.J.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Loayssa, A.
We demonstrate a technique to reduce the sidelobes in optical pulse compression reflectometry for distributed acoustic sensing. The technique is based on using a Gaussian probe pulse with linear frequency modulation. This is shown to improve the sidelobe suppression by 13 dB compared to the use of square pulses without any significant penalty in terms of spatial resolution. In addition, a 2.25 dB enhancement in signal-to-noise ratio is calculated compared to the use of receiver-side windowing. The method is tested by measuring 700 Hz vibrations with a 140 nϵ amplitude at the end of a 50 km fiber sensing link with 34 cm spatial resolution, giving a record 147,058 spatially resolved points., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Brillouin optical time-domain analysis sensor with pump pulse amplification

  • Mompó Roselló, Juan José
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We demonstrate a simple technique to provide conventional Brillouin optical time-domain analysis sensors with mitigation for pump pulse attenuation. The technique is based on operating the sensor in loss configuration so that energy is transferred from the probe wave to the pump pulse that becomes amplified as it counter-propagates with the probe wave. Furthermore, the optical frequency of the probe wave is modulated along the fiber so that the pump pulse experiences a flat total gain spectrum that equally amplifies all the spectral components of the pulse, hence, preventing distortion. This frequency modulation of the probe brings additional advantages because it provides increased tolerance to non-local effects and to spontaneous Brillouin scattering noise, so that a probe power above the Brillouin threshold of the fiber can be safely deployed, hence, increasing the signal-to-noise ratio of the measurement. The method is experimentally demonstrated in a 100-km fiber link, obtaining a measurement uncertainty of 1 MHz at the worst-contrast position., The authors wish to acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through project TEC2013-47264-C2-2-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Brillouin optical time-domain analysis sensor assisted by Brillouin distributed amplification of pump pulses

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate the extension of the measurement range of Brillouin optical time-domain analysis (BOTDA) sensors using a distributed Brillouin amplifier (DBA). The technique is based on injecting a DBA pump wave in the fiber to generate an additional Brillouin interaction that amplifies the BOTDA pump pulses and compensates optical fiber attenuation. This amplification does not introduce any significant noise to the BOTDA’s probe wave due to the inherent directionality of the Brillouin gain. Additionally, we deploy a differential pulse-width pair measurement method to avoid measurement errors due to the interplay between the self-phase modulation effect and the changes in the temporal shape of the pulses induced by the transient behavior of Brillouin gain. Experimental proof-of-concept results in a 50-km fiber link demonstrate full compensa- tion of the fiber’s attenuation with no penalty on the signal-to-noise ratio of the detected signal., The authors wish to acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad through project TEC2013-47264-C2-2-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Vertically coupled microring resonators using one epitaxial growth step and single-side lithography

  • García López, Óscar
  • Thourhout, Dries Van
  • Lasaosa Medarde, Daniel
  • López-Amo Sáinz, Manuel
  • Baets, Roel
  • Galarza Galarza, Marko
A new concept for the fabrication of integrated microring resonators, requiring only one single epitaxial growth and two single-side lithographic steps, is proposed in what is the simplest fabrication scheme for vertical microrings published to date. The approach is based on two vertically stacked phase matched core layers. The effect of bus waveguide, coupling region and ring structure parameters is theoretically analyzed. Numerical calculations predict high performance devices with quality factors of over 10000. The scheme can feature both active and passive regions, allowing the fabrication of microring lasers., This research was supported by the Spanish Government project TEC2013-47264-C2-2-R and FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Narrow-linewidth multi-wavelength random distributed feedback laser

  • Leandro González, Daniel
  • Rota Rodrigo, Sergio
  • Ardanaz, Diego
  • López-Amo Sáinz, Manuel
In this work, narrow-band emission lines are generated by means of two random distributed feedback fiber laser schemes. Spectral line-widths as narrow as 3.2 pm have been measured, which significantly improves previous reported results. The laser is analyzed with the aim of obtaining a spectral line-width as narrow as possible. Additionally a variation of this setup for multi-wavelength operation is also validated. Both schemes present a simple topology that use a combination of phase-shifted fiber Bragg gratings and regular fiber Bragg gratings as filtering elements., This work was supported by the Spanish Government projects TEC2013-47264-C2-2-R and INNOCAMPUS.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Real-time FFT analysis for interferometric sensors multiplexing

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • Ortigosa Cayetano, Amaia
  • López-Amo Sáinz, Manuel
In this paper, a theoretical and experimental study of two interferometric sensor multiplexing schemes has been carried out by means of the fast Fourier transform (FFT) analysis. This work addresses one of the main drawbacks of photonic crystal fiber (PCF) sensors, that is, its multiplexing capability. Using a commercial optical interrogator combined with a simple FFT measurement technique, the simultaneous real-time monitoring of several PCF sensors is achieved. A theoretical analysis has been performed where simulations matched with the experimental results. For the experimental verification, highly birefringent (HiBi) fiber sections that operated as sensing elements were multiplexed and tested in two configurations. Due to the FFT analysis, both multiplexing schemes can be properly interrogated by monitoring the FFT phase change at the characteristic spatial-frequency of each sensor. For this purpose a commercial interrogator and a custom Matlab program were used for computing the FFT and for monitoring the FFT phase change in real-time (1 Hz)., This work was supported by the Spanish Government projects TEC2010-20224-C02-01, TEC2013-47264-C2-2-R, INNOCAMPUS, by the European SUDOE-Interreg Project ECOALMGT and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Overcoming non-local effects and Brillouin threshold limitations in Brillouin optical time domain sensors

  • Ruiz Lombera, Rubén
  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Mirapeix, Jesús
  • López Higuera, José Miguel
  • Loayssa Lara, Alayn
We demonstrate, for the first time to our knowledge, a Brillouin optical time domain analysis (BOTDA) sensor that is able to operate with a probe power larger than the Brillouin threshold of the deployed sensing fiber and that is free from detrimental non-local effects. The technique is based on a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This makes the optical frequency of the Brillouin interactions induced by each probe wave on the pump to vary along the fiber so that two broadband Brillouin gain and loss spectra that perfectly compensate are created. As a consequence, the pulse spectral components remain undistorted avoiding non-local effects. Therefore, a very large probe power can be injected, which improves the signal-to-noise ratio in detection for long-range BOTDA. Moreover, the probe power can even exceed the Brillouin threshold limit due to their frequency modulation, which reduces the effective amplification of spontaneous Brillouin scattering in the fiber. Experiments demonstrate the technique in a 50-km sensing link in which 8 dBm of probe power is injected., This work was supported by the Universidad Pública de Navarra, by the Universidad de Cantabria, and by the Spanish Ministerio de Ciencia e Innovación through project TEC2013-47264-C2 and Feder funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous measurement of humidity and vibration based on a microwire sensor system using Fast Fourier Transform technique

  • Rota Rodrigo, Sergio
  • López Aldaba, Aitor
  • Pérez Herrera, Rosa Ana
  • López Bautista, María del Carmen
  • López-Amo Sáinz, Manuel
This paper presents a new sensor system for vibration and relative humidity measurements based on its interaction with the evanescent field of a microwire. The interrogation of the sensing head is carried out by monitoring the fast Fourier transform (FFT) phase of one of the FFT peaks of the microwire transmission signal. This technique is not dependent of the signal amplitude and also eludes the requisite of tracking the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The point sensor is able to measure a wide humidity range (20%-70% relative humidity) with a maximum sensitivity reached of 0.14πrad/% relative humidity. This microwire sensor is also operated within a frequency range from 320 to 1300 Hz with a sensitivity of around 0.0051 nm -1 /Hz. Finally, due to the system uses an optical interrogator as unique active element, the system presents a cost-effective feature., This work was supported in part by the Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2013-47264-C2-2-R and SUDOE ECOAL-MGT and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous measurement of strain and temperature using a single emission line

  • Leandro González, Daniel
  • Ams, Martin
  • López-Amo Sáinz, Manuel
  • Sun, Tong
  • Grattan, Kenneth T. V.
In this work, we present and demonstrate a novel sensor system for simultaneous measurement of strain and temperature through a unique combination of a long period grating (LPG) and a fiber laser based on a fiber Bragg grating (FBG). In order to achieve this, a new erbium doped fiber laser (EDFL) structure is created, showing an optical signal-to-noise ratio (OSNR) of 55 dB and a peak power measured on the OSA between -5 and 0 dBm. The strain and the temperature information can be obtained by using a unique emission line through monitoring both the fiber laser wavelength shift and the change of the power level, both of which showing a clear linear behavior., This work was supported by the by the Spanish Government projects TEC2010-20224-C02-01, TEC2013-47264-C2-2-R, the FEDER funds and by the European COST action TD1001.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Effects of pump pulse extinction ratio in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Feng, Cheng
  • Urricelqui Polvorinos, Javier
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We report on two previously unknown non-local effects that have been found to impair Brillouin optical time-domain analysis (BOTDA) sensors that deploy limited extinction ratio (ER) pump pulses. The first one originates in the increased depletion of the pedestal of the pump pulses by the amplified probe wave, which in turn entails a reduced amplification of the probe and a measurement distortion. The second effect is due to the interplay between the transient response of the erbium-doped fiber amplifiers (EDFA) that are normally deployed to amplify the pump and the pedestal of the pump pulses. The EDFA amplification modifies the pedestal that follows the pulses in such a way that it also leads to a distortion of the measured gain spectra after normalization. Both effects are shown to lead to non-local effects in the measurements that have similar characteristics to those induced by pump pulse depletion. In fact, the total depletion factor for calculations of the Brillouin frequency shift (BFS) error in BOTDA sensors is shown to be the addition of the depletion factors linked to the pump pulse as well as the pedestal. A theoretical model is developed to analyze both effects by numerical simulation. Furthermore, the effects are investigated experimentally in long-range BOTDA sensors. The pedestal depletion effect is shown to severely constrain the probe power as well as the minimum ER of the pulses that can be deployed in BOTDA sensors. For instance, it is shown that, in a long-range dual-probe BOTDA, an ER higher that 32-dB, which is above that provided by standard electro-optic modulators (EOM), is necessary to be able to deploy a probe power of -3 dBm, which is the theoretical limit for that type of sensors. Even more severe can be the limitation due to the depletion effect induced by the EDFA transient response. It is found that the impairments brought by this effect are independent of the probe power, hence setting an ultimate limit for the BOTDA sensor performance. Experimentally, a long-range BOTDA deploying a 26-dB ER EOM and a conventional EDFA is shown to exhibit a BFS error higher than 1 MHz even for very small probe power., Spanish Ministerio de Economía y Competitividad (TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R); FEDER funds; Universidad Pública de Navarra; German Research Foundation (DFG SCHN 716/13-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Compound lasing fiber optic ring resonators for sensor sensitivity enhancement

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel
  • López-Amo Sáinz, Manuel
In this work, a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors is presented. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is widely improved by creating an external lasing ring resonator with matched spectral response. The combination of the wavelength selective response of the ring resonator and optical amplification from Er-doped fiber amplifier is used to create different fiber lasers. The resulting lasers present an impressive sensitivity enhancement and a dynamic range increment up to 15 dB. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on tunable laser interrogation, our method is >100 times more stable and also simpler, as no wavelength tunable elements are required., The authors would like to acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia through projects TEC2010-20224-C02-01, TEC2013-47264-C2-2-R, TEC2012-37958-C02-01 and Innocampus; from the European FEDER funding, ECOAL-MGT SUDOE project and from the European Research Council through Starting Grant U-FINE (Grant No. 307441).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Random DFB fiber laser for remote (200 km) sensor monitoring using hybrid WDM/TDM

  • Leandro González, Daniel
  • Miguel Soto, Verónica de
  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this paper, a random distributed feedback fiber laser is proposed as a multiplexing scheme for ultralong range measurements (up to 200 km). Optical fiber sensors are time and wavelength multiplexed overcoming one of the main limitations of long-range sensing setups, which is their limited multiplexing capability. The direct modulation of the laser's cavity allows the interrogation of sensors by measuring the reflected power for different wavelengths and distances. Fiber Bragg gratings placed at different fiber locations and wavelengths have been interrogated in two different sensor networks. In addition, in order to improve the performance of the system, some features have been analyzed., This work was supported by the Spanish Government project TEC2013-47264-C2-2-R and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Cost-effective Brillouin optical time-domain analysis sensor using a single optical source and passive optical filtering

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mariñelarena Ollacarizqueta, Jon
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We present a simplified configuration for distributed Brillouin optical time-domain analysis sensors that aims to reduce the cost of the sensor by reducing the number of components required for the generation of the two optical waves involved in the sensing process. Te technique is based on obtaining the pump and probe waves by passive optical filtering of the spectral components generated in a single optical source that is driven by a pulsed RF signal. Te optical source is a compact laser with integrated electroabsorption modulator and the optical filters are based on fiber Bragg gratings. Proof-of-concept experiments demonstrate 1m spatial resolution over a 20km sensing fiber with a 0.9MHz precision in the measurement of the Brillouin frequency shiſt, a performance similar to that of much more complex setups. Furthermore, we discuss the factors limiting the sensor performance, which are basically related to residual spectral components in the filtering process., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the Project TEC2013-47264-C2-2-R, FEDER funds, and Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

All-PM fiber loop mirror interferometer analysis and simultaneous measurement of temperature and mechanical vibration

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, a new all-polarization maintaining (PM) fiber loop mirror interferometer is proposed and validated as temperature and mechanical vibration sensor. The scheme employs the arms of a PM coupler as communication fibers, fused with a relative angle of 45° to the sensing fiber. The length of the arms is equal so their contribution in canceled, obtaining a total transfer function exclusively defined by the sensing fiber. The capabilities of the system as sensor are tested, achieving mechanical vibration and temperature sensing without crosstalk between measurands. In this manner, vibration frequencies up to 1.5 kHz have been monitored using a commercial interrogator with a scan rate of 1 Hz and a technique based on the fast Fourier transform. Additionally, the immunity of the setup to external perturbations in the communication fibers is studied and compared to the conventional approach., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and in part by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Stable multi-wavelength erbium fiber ring laser with optical feedback for remote sensing

  • Díaz Lucas, Silvia
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, we demonstrate a stable fiber sensing system for remote temperature measurements, where the sensing element is an array of four fiber Bragg gratings (FBGs) and sensor interrogation is achieved with a multi-wavelength erbium fiber ring laser. By introducing a feedback fiber loop in a fiber ring cavity, four laser emission lines were obtained simultaneously in single-longitudinal mode operation (SLM). The power instability obtained was lower than 0.5 dB with an optical signal-to-noise ratio (OSNR) higher than 50 dB for all the emitted wavelengths. The application of this system for remote temperature measurements has been demonstrated even though the SLM regime cannot be preserved., This work was supported by the Spanish Ministerio de Ciencia y Tecnologia through project TEC2013-47264-C2-2-R and the INTERREG SUDOE Project “ECOAL-MGT-Ecological Management of Coal Waste Piles, SOE3/P2/P714”.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous measurement of strain and temperature based on clover microstructured fiber loop mirror

  • Pérez Herrera, Rosa Ana
  • André, R. M.
  • Silva, S. F.
  • Becker, M.
  • Schuster, Kay
  • Kobelke, J.
  • López-Amo Sáinz, Manuel
  • Santos, José Luís
  • Frazão, Orlando
In this work, two all-fiber loop mirrors using a clover microstructured fiber for the simultaneous measurement of temperature and strain are presented. The sensing heads are formed by a short piece of clover microstructured fiber with 35 mm and 89 mm length respectively. The geometry of the fiber allowed observing different interferences created by the microstructured fiber core section. Different sensitivities to temperature and strain were obtained and, using a matrix method, it is possible to discriminate both physical parameters. Resolutions of ±2ºC and ±11 μ for the first structure and ±2.3ºC and ±18 μ for the second one, for temperature and strain, respectively, were attained., This work was supported in part by the European COST action TD1001, FEDER founds and the Spanish Government project TEC2013-47264-C2-2-R1.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Experimental and numerical characterization of a hybrid Fabry-Perot cavity for temperature sensing

  • López Aldaba, Aitor
  • Rodrigues Pinto, Ana Margarida
  • López-Amo Sáinz, Manuel
  • Frazão, Orlando
  • Santos, José Luís
  • Baptista, José Manuel
  • Baierl, Hardy
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
A hybrid Fabry-Pérot cavity sensing head based on a four-bridge microstructured fiber is characterized for temperature sensing. The characterization of this cavity is performed numerically and experimentally in the L-band. The sensing head output signal presents a linear variation with temperature changes, showing a sensitivity of 12.5 pm/°C. Moreover, this Fabry-Pérot cavity exhibits good sensitivity to polarization changes and high stability over time., The authors are grateful to the Spanish Government projects TEC 2013-47264-C2-2-R, Innocampus and the INTERREG SUDOE Project “ECOAL-MGT—Ecological Management of Coal Waste Piles, SOE3/P2/P714”, as well as to the FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Fully switchable multi-wavelength fiber lasers based on random distributed feedback for sensors interrogation

  • Bravo Acha, Mikel
  • Miguel Soto, Verónica de
  • Ortigosa Cayetano, Amaia
  • López-Amo Sáinz, Manuel
In this paper, the experimental study and characterization of a novel real-time switchable multi-wavelength fiber laser has been carried out. Two different gain materials, such as a 50 km SMF and a 2.5 km DCF fibers were characterized and compared, respectively. The MWFL can generate any wavelength combination with an emission lines distance of 50, 100 and 200 GHz fitting the ITU grid specifications. By using both Er-doped fiber and Raman amplification, a ~30 nm wide lasing window at the C band can be utilized to create up to 30 different lasing wavelengths into the ITU Grid, that can be switched automatically and in real-time when desired. Utilization of such a laser for versatile interrogation of different sensing networks is also shown., This work was supported by the Spanish Government projects TEC2010-20224-C02-01, TEC2013-47264-C2-2-R, INNOCAMPUS and by the European SUDOE-Interreg Project ECOALMGT, and FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

SnO2-MOF-Fabry-Perot optical sensor for relative humidity measurements

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • Arregui San Martín, Francisco Javier
  • López-Amo Sáinz, Manuel
In this paper, a new optical fiber sensor for relative humidity measurements is presented and characterized. The sensor is based on a SnO2 sputtering deposition on a microstructured optical fiber (MOF) low-finesse Fabry-Pérot (FP) sensing head. The feasibility of the device as a breathing sensor is also experimentally demonstrated. The interrogation of the sensing head is carried out by monitoring the Fast Fourier Transform phase variations of the FP interference frequency. This method substitutes the necessity of tracking the optical spectrum peaks or valleys, which can be a handicap when noise or multiple contributions are present: therefore, it is low-sensitive to noise and to artifacts signal amplitude. The sensor shows a linear behavior in a wide relative humidity range (20%–90% relative humidity) in which the sensitivity is 0.14 rad/%; the maximum observed instability is 0.007 rad, whereas the highest hysteresis is 5% RH. The cross correlation with temperature is also considered and a method to lower its influence is proposed. For human breathing measurement, the registered rising and recovery times are 370 ms and 380 ms respectively., The authors are grateful to A. Ortigosa, D. Erro, Dr. M. Bravo and Dr. R.A. Perez-Herrera. We also thank the Spanish Government projects TEC2013-47264-C2-2-R, TEC 2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study of optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a -phase shifted fiber Bragg grating interrogated in In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser have been studied. Their sensitivities and resolutions as sensors for cryogenic temperatures have been compared regarding their advantages and disadvantages. Additionally, the results have been compared with the given by a commercial optical backscatter reflectometer that allowed for distributed temperature measurements of a single mode fiber., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, Innocampus, Cost action MP1401 and the FEDER funds is acknowledged. Also the support of the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

ECOAL project: delivering solutions for integrated monitoring of coal-related fires supported on optical fiber sensing technology

  • Ribeiro, Joana
  • Viveiros, Duarte
  • Ferreira, João
  • López Gil, Alexia
  • Domínguez López, Alejandro
  • Martins, Hugo F.
  • Pérez Herrera, Rosa Ana
  • López Aldaba, Aitor
  • Duarte, Lia
  • Rodrigues Pinto, Ana Margarida
  • Martín López, Sonia
  • Baierl, Hardy
  • Jamier, Raphael
  • Rougier, Sébastien
  • Auguste, Jean-Louis
  • Teodoro, Ana Cláudia
  • Gonçalves, José Alberto
  • Esteban, Óscar
  • Santos, José Luís
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • González Herráez, Miguel
  • Baptista, José Manuel
  • Flores, Deolinda
The combustion of coal wastes resulting from mining is of particular environmental concern, and the importance of proper management involving real-time assessment of their status and identification of probable evolution scenarios is recognized. Continuous monitoring of the combustion temperature and emission levels of certain gases allows for the possibility of planning corrective actions to minimize their negative impact on the surroundings. Optical fiber technology is well suited to this purpose and here we describe the main attributes and results obtained from a fiber optic sensing system projected to gather data on distributed temperature and gas emissions in these harsh environments., This work was supported by the project ECOAL—MGT—SOE3/P2/P714, Ecological Management of Coal Waste Piles in Combustion, SUDOE—Interreg IV B. The author Joana Ribeiro benefited from a post-doctoral scholarship financed by the Portuguese Science and Technology Foundation, FCT (Ref: SFRH/BPD/76230/2011). The authors acknowledge the funding provided by the Institute of Earth Sciences under contracts UID/GEO/04683/2013 with FCT and COMPETE POCI-01-0145-FEDER, and also by the Spanish Ministry of Economy via project TEC2013-47264-C2-2-R. The work of Sonia Martín-Lopez was supported by the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” Contract. Miguel González Herráez acknowledges the support of the European Research Council through Starting Grant U-FINE (Grant No. 307441).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High resolution polarization-independent highbirefringence fiber loop mirror sensor

  • Leandro González, Daniel
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
In this work, two all polarization-maintaining (PM) highbirefringence (Hi-Bi) fiber loop mirrors (FLM) which are immune to external polarization perturbations are validated both theoretically and experimentally. Simplified and stable versions of classical FLMs were attained using a PM-coupler and by fusing the different Hi-Bi fiber sections with an adequate rotation angle between them. Since the polarization states are fixed along the whole fiber loop, no polarization controllers are needed. This simplifies the operation and increases the stability of the systems, which were also validated as ultra-high resolution sensors, experimentally obtaining a resolution of 6.2·10−4 °C without averaging., This work was supported by the Spanish Government project TEC2013-47264-C2-2-R and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wavelength converter using a highly Er-doped optical fiber ring laser

  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • Rodríguez, Luis
  • Ventura Rípodas, Daniel
  • López Higuera, José Miguel
This work presents an all-fiber wavelength converter based on a highly Er-doped fiber laser, which has been experimentally demonstrated. Frequencies from several kilohertz up to tens of gigahertz have been investigated. Making use of the gain competition in the amplifying medium, the wavelength conversion can be carried out over not only one lasing wavelength, but over several. These analyses have also been carried out for more than one all-fiber ring structure, demonstrating the viability of this wavelength converter. To the best of our knowledge, this is the first time an Er-doped fiber wavelength converter has been validated., This work was supported by the Spanish Comisión Interministerial de Ciencia y Tecnología (CICYT TEC2013-47264-C2 and TEC2016-76021-C2) and FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Enhancement of the dynamic range in slope-assisted coherent brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We present two techniques that provide an extension of the dynamic range of coherent Brillouin optical time-domain analysis (BOTDA) sensors for dynamic measurements. This type of BOTDA sensors rely on self-heterodyne detection of a phase-modulated probe wave and the dynamic range for fast measurements is limited to the linear region of the RF phase-shift spectrum measured. The first method for range extension that we introduce is based on launching pump pulses containing multiple frequency components. This makes the Brillouin spectra generated by each component to overlap, providing a wider linear region of the detected RF phase-shift spectrum and allowing to measure larger Brillouin frequency shift variations. The second method relies on shortening the length of the pump pulses, which leads to the broadening of the detected RF spectra. The theoretical fundamentals of both range enhancing techniques are presented. Moreover, we experimentally demonstrate that they provide a threefold to fourfold enhancement in the dynamic range. Finally, the factors limiting their performance are determined: for the multi-frequency pump pulse technique, it is the worsening of Kerr non-linear effects due to the simultaneous propagation of multiple spectral components in the fiber, and, for the pulse-shortening method, it is the signal-to-noise ratio penalty linked to the reduction of the magnitude of the Brillouin interaction., This work was supported in part by the Universidad Pública de Navarra, in part by the Feder funds, and in part by the Spanish Ministerio de Economía y Competitividad through Project TEC2013-47264-C2-2-R and Project TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Polarization diversity scheme for BOTDA sensors based on a double orthogonal pump interaction

  • Urricelqui Polvorinos, Javier
  • López Fernandino, Felipe
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We introduce a Brillouin optical time domain analysis (BOTDA) sensor deploying a novel polarization diversity technique based on the use of two orthogonal pump pulses which simultaneously interact with a phase modulated probe wave. The orthogonallity of the two pump pulses guarantees that two complementary Brillouin interactions take place at each position of the fiber, so that polarization independent measurements are performed throughout the fiber even if no averaging is applied. This feature can be exploited in dynamic distributed BOTDA sensors to reduce the measurement time, as no extra averaging is required to compensate the polarization dependence of Brillouin interaction. Proof of concept experiments demonstrate the feasibility of the technique by employing a completely passive scheme to generate the orthogonal pump pulses. Furthermore, the technique is stable and easy to implement, making it a perfect candidate for practical sensor implementations., The authors wish to acknowledge the financial support from the Universidad Pública de Navarra and Spanish Ministerio de Ciencia e Innovación through the project TEC2013–47264–C2–2–R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Non-local effects in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mompó Roselló, Juan José
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin optical time-domain analysis (BOTDA) sensors have great potential to provide distributed measurements of temperature and strain over large structures with high spatial resolution and measurement precision. However, their performance ultimately depends on the amount of probe and pump pulse power that can be injected into the sensing fiber, which determines the signal-to-noise ratio of the detected measurement signal. The probe wave power is constrained by the generation of noise induced by spontaneous Brillouin scattering and at lower power by the so-called non-local effects. In this work, we focus on the latter. We review the physical origins of non-local effects and analyze the performance impairments that they bring. In addition, we discuss the different methods that have been proposed to counteract these effects comparing their relative merits and ultimate performance. Particularly, we focus on a technique that we have devised to compensate non-local effects which is based on introducing an optical frequency modulation or dithering to the probe wave. This method is shown to provide a comprehensive solution to most of the impairments associated with non-local effects and also to enable some side benefits, such as amplification of the pump pulses to compensate the attenuation of the fiber., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016- 76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Cyclic coding for Brillouin optical time-domain analyzers using probe dithering

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We study the performance limits of mono-color cyclic coding applied to Brillouin optical time-domain analysis (BOTDA) sensors that use probe wave dithering. BOTDA analyzers with dithering of the probe use a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This avoids non-local effects while keeping the Brillouin threshold at its highest level, thus preventing the spontaneous Brillouin scattering from generating noise in the deployed sensing fiber. In these conditions, it is possible to introduce an unprecedented high probe power into the sensing fiber, which leads to an enhancement of the signal-to-noise ratio (SNR) and consequently to a performance improvement of the analyzer. The addition of cyclic coding in these set-ups can further increase the SNR and accordingly enhance the performance. However, this unprecedented probe power levels that can be employed result in the appearance of detrimental effects in the measurement that had not previously been observed in other BOTDA set-ups. In this work, we analyze the distortion in the decoding process and the errors in the measurement that this distortion causes, due to three factors: the power difference of the successive pulses of a code sequence, the appearance of first-order non-local effects and the non-linear amplification of the probe wave that results when using mono-color cyclic coding of the pump pulses. We apply the results of this study to demonstrate the performance enhancement that can be achieved in a long-range dithered dual-probe BOTDA. A 164-km fiber-loop is measured with 1-m spatial resolution, obtaining 3-MHz Brillouin frequency shift measurement precision at the worst contrast location. To the best of our knowledge, this is the longest sensing distance achieved with a BOTDA sensor using mono-color cyclic coding., H. Iribas and A. Loayssa wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous strain and temperature multipoint sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and independent multipoint strain and temperature measurements is presented. The interrogation of the sensing heads has been carried out by monitoring their FFT phase variations. In particular, two of each microstructured optical fiber (M0F) cavity interference frequencies were used for the measures. This method is independent of the signal amplitude and also avoids the necessity of tracking the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensing heads present birefringent and multimodal properties and therefore both characteristics lead to their own interference with different properties and sensitivities. The multiplexing capability of the sensing heads and the interrogator method has also been tested and validated. Sensors were operated within a range of temperature 30°C-80°C and a deformation of ̴450 με was applied. Crosstalk between measurements can be corrected through simple math operations leading to independent and crosstalk-free multipoint and multiparameter sensors., This work was supported in part by the Spanish Comisi´on Interministerial de Ciencia y Tecnolog´ıa within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, in part by Cost action MP1401, and in part by FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Gain dependence of the phase-shift spectra measured in coherent Brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We report on the effects of large pump pulse powers on Brillouin optical time-domain analysis (BOTDA) sensors based on phase-modulated probe wave and coherent self-heterodyne detection. These sensors are particularly suitable to perform dynamic strain and temperature measurements because the radio-frequency (RF) signal that is obtained when the probe wave is detected has a phase-shift spectrum that is independent to first order of the Brillouin gain. Therefore, a fixed optical frequency separation between pump and probe wave can be deployed and uses the stable RF phase-shift spectrum to obtain the Brillouin frequency shift (BFS) from measured changes in the probe RF phase-shift. However, in this paper, it is found that there is a narrowing of the RF phase-shift spectrum that depends on the Brillouin gain. This effect becomes significant when very high power pulses are used and the resultant large gain induces a narrowing of the RF phase-shift spectrum. This narrowing leads to a BFS measurement error when the sensor is configured for dynamic measurements. We analyze, theoretically and experimentally, the origins and the magnitude of the narrowing of RF phase-shift spectra for high pump pulses in a coherent BOTDA sensor. Furthermore, this spectral shape change is compared to the broadening of the gain spectrum that has been recently discovered in conventional direct-detection BOTDA sensors, which is linearly dependent on the pulse peak power injected to the fiber, finding that the spectral shape change is less significant in coherent BOTDA sensors. Finally, we quantify the BFS measurement error that it can induce and find the trade-offs to keep it below a certain threshold. It is found that, from a practical point of view, this effect is significant for short fibers, where nonlinear effects are negligible and large pump pulses can be used., This work was supported by the Universidad Publica de Navarra, Feder funds and Spanish Ministerio de Economía y Competitividad through the project TEC2013-47264-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous measurement of humidity and vibration based on a nanowire sensor system using Fast Fourier Transform technique

  • Rota Rodrigo, Sergio
  • López Aldaba, Aitor
  • Pérez Herrera, Rosa Ana
  • López Bautista, María del Carmen
  • Esteban, Óscar
  • López-Amo Sáinz, Manuel
This paper presents a new sensor system for vibration and relative humidity measurements based on its interaction with the evanescent field of a microwire. The interrogation of the sensing head is carried out by monitoring the fast Fourier transform (FFT) phase of one of the FFT peaks of the microwire transmission signal. This technique is not dependent of the signal amplitude and also eludes the requisite of tracking the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency ..., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within project TEC2013-47264-C2-2-R and SUDOE ECOAL-MGT and FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Second-order nonlocal effects mitigation in Brillouin optical time-domain analysis sensors by tracking the Brillouin frequency shift profile of the fiber

  • Mompó Roselló, Juan José
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We report on an additional limitation that has been found in Brillouin optical time-domain analysis (BOTDA) sensors due to the so-called second-order nonlocal effects (NLE). Second-order NLE appear in BOTDA setups that deploy a double probe waves to compensate the transfer of energy between the pump pulse and the probe wave, and are related to a spectral distortion of the pump pulse that leads to measurement errors and an effective limit on the maximum probe power that can be deployed in the sensor. We theoretically and experimentally demonstrate that the techniques that have been presented so far in the literature to compensate second-order NLE are only effective in the case that the Brillouin frequency shift (BFS) along the sensing fiber is uniform. However, this requirement for uniformity is not realistic in real world scenarios in which a variety of fibers with different BFS and subjected to different environmental conditions are typically deployed. Therefore, we demonstrate a new method to mitigate the effects of BFS variation in the BOTDA setups that compensate second-order NLE. This method is based on introducing an additional wavelength modulation to the probe wave so as to track the mean BFS changes along the sensing fiber link. With this method, we demonstrate a BOTDA setup that, without coding, distributed amplification, or any other form of performance enhancement, achieves a sensing length of 120 km with 3-m spatial resolution and 2-MHz measurement precision. Moreover, the setup demonstrates, to our knowledge, the largest probe power ever injected in a BOTDA sensing link., This work was supported by the Universidad Pública de Navarra, Feder funds and Spanish Ministerio de Economía y Competitividad through the project TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optimization of the available spectrum of a WDM sensors network using a mode locked laser

  • Fernández Vallejo, Montserrat
  • Ardanaz, Diego
  • López-Amo Sáinz, Manuel
This work experimentally proposes a new interrogation method which consists on the combination of the information given by both domains: time and frequency. On the one hand, the sensor information is obtained in the frequency domain as usual and, on the other hand, the detection of the different pulses generated through mode locking allows the identification of each FBG. It has been proved that FBGs spaced less than 0.15 nm can be interrogated. The sensor network based on simple ring Erbium doped fiber laser using the FBGs, located in a serial configuration, as wavelength selective reflectors for the lasing structure, acting them also as the sensing transducers elements., This work was supported in part by the Spanish Government projects TEC2013-47264-C2-2-R, innocampus and FEDER funds.