Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A microwave polarimeter demonstrator for astronomy with near-infra-red up-conversion for optical correlation and detection

  • Casas-Reinares, F. J.
  • Ortiz, David
  • Aja, Beatriz
  • Fuente, Luisa de la
  • Artal, Eduardo
  • Ruiz, Rubén
  • Mirapeix, Jesús M.
This paper presents a 10 to 20 GHz bandwidth microwave polarimeter demonstrator, based on the implementation of a near-infra-red frequency up-conversion stage that allows both the optical correlation, when operating as a synthesized-image interferometer, and signal detection, when operating as a direct-image instrument. The proposed idea is oriented towards the implementation of ultra-sensitive instruments presenting several dozens or even thousands of microwave receivers operating in the lowest bands of the cosmic microwave background. In this work, an electro-optical back-end module replaces the usual microwave detection stage with Mach–Zehnder modulators for the frequency up-conversion, and an optical stage for the signals correlation and detection at near-infra-red wavelengths (1550 nm). As interferometer, the instrument is able to correlate the signals of large-format instruments, while operating as a direct imaging instrument also presents advantages in terms of the possibility of implementing the optical back end by means of photonic integrated circuits to achieve reductions in cost, weight, size, and power consumption. A linearly polarized input wave, with a variable polar angle, is used as a signal source for laboratory tests. The receiver demonstrator has proved its capabilities of being used as a new microwave-photonic polarimeter for the study of the lowest bands of cosmic microwave background., The authors would like to thank Spanish Ministry for Economy and Competitiveness (currently Ministry of Science, innovation and Universities) for the financial support provided under the projects with references ESP2015-70646-C2-1-R, AYA2015-72768-EXP, ESP2017-83921-C2-1-R, TEC2013-47264-C2-1-R,TEC2016-76021-C2-2-R and CIBERBBN all co-financed with EU FEDER funds., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Ultra-long (290 km) remote interrogation sensor network based on a random distributed feedback fiber laser

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, an interferometric sensor has been interrogated 290 km away from the monitoring station, reaching the longest distance in fiber optic sensing up to date. This has been attained by employing a double-pumped random distributed feedback fiber laser as the light source for a fiber optic low-coherence interferometry scheme. Additionally, the capability of the system to achieve coherence multiplexing for ultra-long range measurements (up to 270 km) has been proved, without presenting crosstalk between the sensors. The use of coherence multiplexing together with a random distributed feedback fiber laser addresses two of the main limitations of long-range sensing setups: their limited multiplexing capability and the need to reach the maximum monitoring distance., Spanish Comision Interministerial de Ciencia y Tecnología within project TEC2016-76021- C2-1-R as well as the FEDER funds, and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Spectral shadowing suppression technique in phase-OTDR sensing based on weak fiber Bragg grating array

  • Miguel Soto, Verónica de
  • Jason, Johan
  • Kurtoglu, Deniz
  • López-Amo Sáinz, Manuel
  • Wuilpart, Marc
A postprocessing procedure is presented to suppress spectral shadowing in phase-OTDR sensing systems based on a weak fiber Bragg grating array. A complete theoretical analysis of the interfering signals has been carried out to identify a compensation method. The proposed approach has been applied to simulated and experimental phase-OTDR in the context of vibration measurements. Fast Fourier transform has been employed to analyze the obtained results, which has verified the validity of the proposed method to suppress spectral shadowing., This work was performed with support from BEWARE Fellowships/Academia project 1510633 financed by the Walloon region in Belgium. Also with the support of the Spanish Government project TEC 2016-76021-C2-1-R as well of the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optical fiber lasers assisted by microdrilled optical fiber tapers

  • Pérez Herrera, Rosa Ana
  • Pallarés Aldeiturriaga, D.
  • Júdez Colorado, Aitor
  • Rodríguez Cobo, Luis
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
In this Letter, we present an analysis of the backscattering generated in a microdrilled tapered fiber within a short-linear-cavity fiber laser. We propose and experimentally demonstrate a fiber cavity laser based on a tapered optical fiber segment that generates artificially controlled backscattering. The 50-mu m-waist taper was fabricated from a standard single-mode fiber, and the taper was subsequently microdrilled using a femtosecond laser micromachining system. The laser generation properties conferred by the microdrilled optical fiber taper were experimentally investigated. A single-wavelength laser emission at 1562 nm with an output power of 10 dBm and an optical signal-to-noise ratio greater than 45 dB is demonstrated., Ministerio de Economía y Competitividad (MINECO) (TEC 2016-76021-C2-R); European Regional Development Fund (ERDF).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Quasi-distributed vibration sensing using OFDR and weak reflectors

  • Zhu, Mengshi
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
The authors proposed a quasi-distributed vibration sensing technique using in-line weak reflectors and optical frequency domain reflectometry (OFDR). As a result, they achieved an 8 kHz measurable vibration frequency with a 15-20 cm spatial resolution employing a low repetition rate (similar to 8 Hz). Moreover, a measurable frequency of 30 kHz was achieved for a 1.5 m spatial resolution. The ability of the system to determine the frequency and amplitude of several sections vibrating simultaneously is evaluated for different configurations. Because of the simple arrangement, high detectable frequency, and high sensitivity, this approach is expected to be especially well suited for mechanical vibration sensing applications, particularly in medium-sized structures., Ministerio de Economía, Industria y Competitividad, Gobierno de España (TEC2016-76021-C2-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Effects of pump pulse extinction ratio in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Mariñelarena Ollacarizqueta, Jon
  • Feng, Cheng
  • Urricelqui Polvorinos, Javier
  • Schneider, Thomas
  • Loayssa Lara, Alayn
We report on two previously unknown non-local effects that have been found to impair Brillouin optical time-domain analysis (BOTDA) sensors that deploy limited extinction ratio (ER) pump pulses. The first one originates in the increased depletion of the pedestal of the pump pulses by the amplified probe wave, which in turn entails a reduced amplification of the probe and a measurement distortion. The second effect is due to the interplay between the transient response of the erbium-doped fiber amplifiers (EDFA) that are normally deployed to amplify the pump and the pedestal of the pump pulses. The EDFA amplification modifies the pedestal that follows the pulses in such a way that it also leads to a distortion of the measured gain spectra after normalization. Both effects are shown to lead to non-local effects in the measurements that have similar characteristics to those induced by pump pulse depletion. In fact, the total depletion factor for calculations of the Brillouin frequency shift (BFS) error in BOTDA sensors is shown to be the addition of the depletion factors linked to the pump pulse as well as the pedestal. A theoretical model is developed to analyze both effects by numerical simulation. Furthermore, the effects are investigated experimentally in long-range BOTDA sensors. The pedestal depletion effect is shown to severely constrain the probe power as well as the minimum ER of the pulses that can be deployed in BOTDA sensors. For instance, it is shown that, in a long-range dual-probe BOTDA, an ER higher that 32-dB, which is above that provided by standard electro-optic modulators (EOM), is necessary to be able to deploy a probe power of -3 dBm, which is the theoretical limit for that type of sensors. Even more severe can be the limitation due to the depletion effect induced by the EDFA transient response. It is found that the impairments brought by this effect are independent of the probe power, hence setting an ultimate limit for the BOTDA sensor performance. Experimentally, a long-range BOTDA deploying a 26-dB ER EOM and a conventional EDFA is shown to exhibit a BFS error higher than 1 MHz even for very small probe power., Spanish Ministerio de Economía y Competitividad (TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R); FEDER funds; Universidad Pública de Navarra; German Research Foundation (DFG SCHN 716/13-1).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Real time measuring system of multiple chemical parameters using microstructured optical fibers based sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a multiplexing system for simultaneous interrogation of optical fiber sensors which measure different parameters is presented and validated. The whole system has been tested with 6 different sensing heads with different purposes: one temperature sensing head, two relative humidity sensors and three VOCs leak sensors; all of them based on microstructured optical fibers. The interrogation system uses the FFT technique to isolate each sensor's interference, enabling their simultaneous interrogation. The system interrogates all the sensors at frequencies up to 1 KHz, showing a good performance of each measurement without crosstalk between sensors. The developed system is independent of the sensors' purpose or of the multiplexing topology., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects under Grant TEC2016-76021-C2-1-R, Grant TEC2016-78047-R, and Grant TEC2016-79367-C2-2-R, in part by the Cost Action MP1401, and in part by the FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

All-PM fiber loop mirror interferometer analysis and simultaneous measurement of temperature and mechanical vibration

  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, a new all-polarization maintaining (PM) fiber loop mirror interferometer is proposed and validated as temperature and mechanical vibration sensor. The scheme employs the arms of a PM coupler as communication fibers, fused with a relative angle of 45° to the sensing fiber. The length of the arms is equal so their contribution in canceled, obtaining a total transfer function exclusively defined by the sensing fiber. The capabilities of the system as sensor are tested, achieving mechanical vibration and temperature sensing without crosstalk between measurands. In this manner, vibration frequencies up to 1.5 kHz have been monitored using a commercial interrogator with a scan rate of 1 Hz and a technique based on the fast Fourier transform. Additionally, the immunity of the setup to external perturbations in the communication fibers is studied and compared to the conventional approach., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R and in part by the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Virtual FBGs using saturable absorbers for sensing with fiber lasers

  • Rodríguez Cobo, Luis
  • Pérez Herrera, Rosa Ana
  • Quintela, M. A.
  • Ruiz Lombera, Rubén
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
The spectral narrowing of Fiber Bragg Gratings (FBGs) introduced by unpumped Er-doped fiber (EDF) was analyzed for fiber lasers (FL). Owing to spatial hole burning (SHB), the spectral response of a virtual FBG can be employed for narrowing the band pass filter employed to determine the lasing wavelength of laser cavities. A common FL was mounted to analyze the spectral stability of the method, and a FL sensor for strain and temperature measurements was experimentally characterized to determine the stability of the narrowing effect achieved by the unpumped EDF, which acts as a virtual FBG. The results exhibited remarkably good narrowing effects of the spectral response of uniform FBGs., This research was funded by MINECO (Spain) project TEC 2016-76021-C2-R and FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Tunable SESAM-based mode-locked soliton fiber laser in linear cavity by axial-strain applied to a FBG

  • Aporta, I.
  • Leandro González, Daniel
  • Quintela, M. A.
  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
A self-started stable tunable mode-locked (ML) soliton fiber laser in a linear cavity structure composed by commercial passive elements is presented in this paper. It is based on the combination of an Erbium doped fiber (EDF) as the active medium, and a saturated fiber Bragg grating (FBG) as a partial mirror of the cavity. The other side of the cavity consists of a semiconductor saturable absorber mirror (SESAM) acting also as the mode-locking device. The central wavelength of the FBG is selected by the application of axial strain giving rise to a tunable soliton over 8.6 nm on the C band with a variable spacing of 0.01 nm. The laser delivers 18.9 ps long pulses with a 0.14 nm bandwidth, an 8.2 MHz repetition rate, a pulse energy of 89 pJ and a peak power of 4.71 W., This work was supported in part by the Spanish Comisión Interministerial de Ciencia y Tecnología under Project TEC2016-76021-C2—R and in part by the Feder funds and the Spanish Ministry of Education and Culture, under Scholarship FPU14/02196.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Novais, Susana
  • Pradas Martínez, Javier
  • López-Amo Sáinz, Manuel
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, based on FP interference and AR reflecting guidance, was fabricated with two different air micro-cavities. The attained experimental results showed different strain and temperature sensitivities for the antiresonance contribution. However, when analyzing the FP interference, only strain sensitivity was observed, demonstrating that this air micro-cavity was also insensitive to temperature variations., This work was supported by the Spanish AEI projects TEC2016-76021-C2 and PID2019-107270RB-C22, FEDER Funds, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, Projects for young researches UPNA 2019, “Caja Navarra” and “la Caixa” foundations under agreement LCF/PR/PR13/51080004 and the grant BGP18/00180 of the “Beatriz Galindo” programme from the Spanish Ministry of Science, Innovation and Universities.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Watt-level green random laser at 532  nm by SHG of Yb-doped fiber laser

  • Rota Rodrigo, Sergio
  • Gouhier, B.
  • Dixneuf, C.
  • Antoni Micollier, L.
  • Guiraud, G.
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
  • Traynor, N.
  • Santarelli, Giorgio
We have developed a Watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium-gain assisted fiber laser seed with a 0.35 nm line-width and 900 mW polarized output power. A study for the optimal length of the random distributed mirror was carried out. An ytterbium-doped fiber master oscillator power amplifier architecture is used to amplify the random seeder laser without additional spectral broadening up to 20 W. By using a periodically poled lithium niobate(PPLN) crystal in a single pass configuration we generate in excess of 1 W random laser at 532 nm by second harmonic generation with an efficiency of 9%. The green random laser exhibits an instability <1%, optical signal to noise ratio >70 dB, 0.1 nm linewidth and excellent beam quality., Agence Nationale de la Recherche (ANR) (ANR14 LAB05 0002 01); Conseil Régional d’Aquitaine (2014–IR60309-00003281); Horizon 2020 Framework Programme (H2020) (Marie Sklodowska-Curie—748839); Lasers and Photonics in Aquitane (LAPHIA); Spanish Government (TEC 2016-76021-C2-1-R); AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Study of optical fiber sensors for cryogenic temperature measurements

  • Miguel Soto, Verónica de
  • Leandro González, Daniel
  • López Aldaba, Aitor
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a -phase shifted fiber Bragg grating interrogated in In this work, the performance of five different fiber optic sensors at cryogenic temperatures has been analyzed. A photonic crystal fiber Fabry-Pérot interferometer, two Sagnac interferometers, a commercial fiber Bragg grating (FBG), and a π-phase shifted fiber Bragg grating interrogated in a random distributed feedback fiber laser have been studied. Their sensitivities and resolutions as sensors for cryogenic temperatures have been compared regarding their advantages and disadvantages. Additionally, the results have been compared with the given by a commercial optical backscatter reflectometer that allowed for distributed temperature measurements of a single mode fiber., Financial support from the Spanish Comisión Interministerial de Ciencia y Tecnología within projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, Innocampus, Cost action MP1401 and the FEDER funds is acknowledged. Also the support of the Institute of Smart Cities by means of a postdoctoral fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Hybrid Raman‑erbium random fiber laser with a half open cavity assisted by artificially controlled backscattering fiber refectors

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Galarza Galarza, Marko
  • Sañudo-Lasagabaster Ibáñez, Silvia
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
A hybrid Raman-erbium random fber laser with a half-open cavity assisted by chirped artifcially controlled backscattering fber refectors is presented. A combination of a 2.4 km-long dispersion compensating fber with two highly erbium-doped fber pieces of 5 m length were used as gain media. A single random laser emission line centered at 1553.8 nm with an optical signal to noise ratio of 47 dB were obtained when pumped at 37.5 dBm. A full width at half maximum of 1 nm and a 100% confdence level output power instability as low as 0.08 dB were measured. The utilization of the new laser cavity as a temperature and strain sensor is also experimentally studied., This work was supported by the Ministerio de Economía y Competitividad of Spain (TEC2016-76021-C2), the Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (PID2019-107270RB) and the FEDER funds, the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and Projects for young researchers UPNA 2019 (PJUPNA1928).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Vertically coupled InP/InGaAsP microring lasers using a single epitaxial growth and singleside lithography

  • García López, Óscar
  • Thourhout, Dries Van
  • Verstuyft, Steven
  • López-Amo Sáinz, Manuel
  • Baets, Roel
  • Galarza Galarza, Marko
The experimental demonstration of vertical microring lasers requiring only one single epitaxial growth and two single-side lithographic steps is presented, in what is the simplest fabrication scheme for such devices published to date. The fabricated lasers show series resistance of around 20 Ω at forward bias, threshold currents at room temperature between 35 and 58 mA, and single-mode emission with a side-lobe suppression ratio higher than 30 dB. The measured optic output power level is of tens of microwatts. The approach allows the improvement of the optical features maintaining the simplicity of the manufacturing procedure., This work was supported by the Spanish Agencia Estatal de Investigación within project TEC2016-76021-C2-1-R, and FEDER funds of EU.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Comparison between capacitive and microstructured optical fiber soil moisture sensors

  • López Aldaba, Aitor
  • López Torres, Diego
  • Campo-Bescós, Miguel
  • López Rodríguez, José Javier
  • Yerro Lizarazu, David
  • Elosúa Aguado, César
  • Arregui San Martín, Francisco Javier
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
Soil moisture content has always been an important parameter to control because it is a deterministic factor for site-specific irrigation, seeding, transplanting, and compaction detection. In this work, a discrete sensor that is based on a SnO2–FP (Fabry-Pérot) cavity is presented and characterized in real soil conditions. As far as authors know, it is the first time that a microstructured optical fiber is used for real soil moisture measurements. Its performance is compared with a commercial capacitive soil moisture sensor in two different soil scenarios for two weeks. The optical sensor shows a great agreement with capacitive sensor’s response and gravimetric measurements, as well as a fast and reversible response; moreover, the interrogation technique allows for several sensors to be potentially multiplexed, which offers the possibility of local measurements instead of volumetric: it constitutes a great tool for real soil moisture monitoring., This work was supported by the Spanish Government projects TEC2016-76021-C2-1-R, TEC2016-78047-R, TEC2016-79367-C2-2-R, Innocampus and the Cost Action MP 1401, as well as to the AEI/FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Quasi-distributed vibration sensing based on weak reflectors and STFT demodulation

  • Leandro González, Daniel
  • Zhu, Mengshi
  • López-Amo Sáinz, Manuel
  • Murayama, Hideaki
In this work, a new system is proposed for quasi-distributed vibration sensing based on the Doppler effect. The setup employs an optical frequency domain reflectometer (OFDR) and an array of weak reflectors. The short-time Fourier transform (STFT) is employed to obtain the spectrogram, then the demodulation process detects the frequency variation and compensates the accumulated response. In this manner, events occurring in the fiber segment between neighboring reflectors can be measured. The theoretical development of the approach is presented and demonstrated, evidencing the velocimeter operation of the technique. The setup has been proved in several tests under different perturbation conditions, evaluating the limitations and capabilities. This solution presents many advantages such as the ability to measure arbitrary perturbations, the linear response, high spatial-resolution, simplicity, high configurability or the low repetition rate required to detect kilohertz-frequency vibrations., This work was supported by a Fundación La Caixa postdoc and Talent Grant, the project AEI TEC-2016-76021-C2-1 and the FEDER funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wavelength converter using a highly Er-doped optical fiber ring laser

  • Pérez Herrera, Rosa Ana
  • López-Amo Sáinz, Manuel
  • Rodríguez, Luis
  • Ventura Rípodas, Daniel
  • López Higuera, José Miguel
This work presents an all-fiber wavelength converter based on a highly Er-doped fiber laser, which has been experimentally demonstrated. Frequencies from several kilohertz up to tens of gigahertz have been investigated. Making use of the gain competition in the amplifying medium, the wavelength conversion can be carried out over not only one lasing wavelength, but over several. These analyses have also been carried out for more than one all-fiber ring structure, demonstrating the viability of this wavelength converter. To the best of our knowledge, this is the first time an Er-doped fiber wavelength converter has been validated., This work was supported by the Spanish Comisión Interministerial de Ciencia y Tecnología (CICYT TEC2013-47264-C2 and TEC2016-76021-C2) and FEDER Funds.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Enhancement of the dynamic range in slope-assisted coherent brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We present two techniques that provide an extension of the dynamic range of coherent Brillouin optical time-domain analysis (BOTDA) sensors for dynamic measurements. This type of BOTDA sensors rely on self-heterodyne detection of a phase-modulated probe wave and the dynamic range for fast measurements is limited to the linear region of the RF phase-shift spectrum measured. The first method for range extension that we introduce is based on launching pump pulses containing multiple frequency components. This makes the Brillouin spectra generated by each component to overlap, providing a wider linear region of the detected RF phase-shift spectrum and allowing to measure larger Brillouin frequency shift variations. The second method relies on shortening the length of the pump pulses, which leads to the broadening of the detected RF spectra. The theoretical fundamentals of both range enhancing techniques are presented. Moreover, we experimentally demonstrate that they provide a threefold to fourfold enhancement in the dynamic range. Finally, the factors limiting their performance are determined: for the multi-frequency pump pulse technique, it is the worsening of Kerr non-linear effects due to the simultaneous propagation of multiple spectral components in the fiber, and, for the pulse-shortening method, it is the signal-to-noise ratio penalty linked to the reduction of the magnitude of the Brillouin interaction., This work was supported in part by the Universidad Pública de Navarra, in part by the Feder funds, and in part by the Spanish Ministerio de Economía y Competitividad through Project TEC2013-47264-C2-2-R and Project TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Liquid level sensor based on dynamic Fabry–Perot interferometers in processed capillary fiber

  • Roldán Varona, Pablo
  • Pérez Herrera, Rosa Ana
  • Rodríguez Cobo, Luis
  • Reyes González, Luis
  • López-Amo Sáinz, Manuel
In this work, a novel optical fiber sensor capable of measuring both the liquid level and its refractive index is designed, manufactured and demonstrated through simulations and experimentally. For this, a silica capillary hollow-core fiber is used. The fiber, with a sensing length of 1.55 mm, has been processed with a femtosecond laser, so that it incorporates four holes in its structure. In this way, the liquid enters the air core, and it is possible to perform the sensing through the Fabry–Perot cavities that the liquid generates. The detection mode is in reflection. With a resolution of 4 μm (liquid level), it is in the state of the art of this type of sensor. The system is designed so that in the future it will be capable of measuring the level of immiscible liquids, that is, liquids that form stratified layers. It can be useful to determine the presence of impurities in tanks., This work was supported by the Ministerio de Economía y Competitividad of Spain (TEC2016-76021-C2-1-R and TEC2016-76021-C2-2-R), the FEDER/Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (PID2019-107270RB-C21 and PID2019-107270RB-C22), the Ministerio de Educación, Cultura y Deporte of Spain (PhD grant FPU2018/02797), and Projects for young researches UPNA 2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Sensitivity optimization of a microstructured optical fiber ammonia gas sensor by means of tuning the thickness of a metal oxide nano-coating

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, the influence of the thickness of metallic-oxide coatings, ITO, and SnO2 on the sensitivity of a microstructured optical fiber Fabry–Pérot (FP) has been studied with the aim of developing ammonia gas fiber optic sensors. Also, the distribution of the optical power that can be coupled to the metallic-oxide sensing films is investigated in order to understand how the sensor’s sensitivity can be improved; the thickness of the coatings plays a relevant role on the sensitivity and response time. Films with thicknesses between 200 and 850 nm were experimentally examined resulting in an optimal thickness of 625 nm for a SnO2 film. The behavior of the sensors toward different concentrations of ammonia gas from 10 to 130 ppm was analyzed by measuring the phase shifts of the reflected signal using the fast Fourier transform of its optical spectrum. The registered response/recovery times of this sensor are below 90 s., This work was supported in part by the Ministerio de Economía y Ciencia (MINECO) of Spain within projects under Grant TEC2016-79367-C2-2-R and Grant TEC2016-76021-C2-1-R, in part by the FEDER funds from the European Union, and in part by the University Public of Navarre Program Ph.D grants
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Non-local effects in Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Mompó Roselló, Juan José
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin optical time-domain analysis (BOTDA) sensors have great potential to provide distributed measurements of temperature and strain over large structures with high spatial resolution and measurement precision. However, their performance ultimately depends on the amount of probe and pump pulse power that can be injected into the sensing fiber, which determines the signal-to-noise ratio of the detected measurement signal. The probe wave power is constrained by the generation of noise induced by spontaneous Brillouin scattering and at lower power by the so-called non-local effects. In this work, we focus on the latter. We review the physical origins of non-local effects and analyze the performance impairments that they bring. In addition, we discuss the different methods that have been proposed to counteract these effects comparing their relative merits and ultimate performance. Particularly, we focus on a technique that we have devised to compensate non-local effects which is based on introducing an optical frequency modulation or dithering to the probe wave. This method is shown to provide a comprehensive solution to most of the impairments associated with non-local effects and also to enable some side benefits, such as amplification of the pump pulses to compensate the attenuation of the fiber., The authors wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016- 76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Cyclic coding for Brillouin optical time-domain analyzers using probe dithering

  • Iribas Pardo, Haritz
  • Loayssa Lara, Alayn
  • Sauser, Florian
  • Llera, Miguel
  • Le Floch, Sébastien
We study the performance limits of mono-color cyclic coding applied to Brillouin optical time-domain analysis (BOTDA) sensors that use probe wave dithering. BOTDA analyzers with dithering of the probe use a dual-probe-sideband setup in which an optical frequency modulation of the probe waves along the fiber is introduced. This avoids non-local effects while keeping the Brillouin threshold at its highest level, thus preventing the spontaneous Brillouin scattering from generating noise in the deployed sensing fiber. In these conditions, it is possible to introduce an unprecedented high probe power into the sensing fiber, which leads to an enhancement of the signal-to-noise ratio (SNR) and consequently to a performance improvement of the analyzer. The addition of cyclic coding in these set-ups can further increase the SNR and accordingly enhance the performance. However, this unprecedented probe power levels that can be employed result in the appearance of detrimental effects in the measurement that had not previously been observed in other BOTDA set-ups. In this work, we analyze the distortion in the decoding process and the errors in the measurement that this distortion causes, due to three factors: the power difference of the successive pulses of a code sequence, the appearance of first-order non-local effects and the non-linear amplification of the probe wave that results when using mono-color cyclic coding of the pump pulses. We apply the results of this study to demonstrate the performance enhancement that can be achieved in a long-range dithered dual-probe BOTDA. A 164-km fiber-loop is measured with 1-m spatial resolution, obtaining 3-MHz Brillouin frequency shift measurement precision at the worst contrast location. To the best of our knowledge, this is the longest sensing distance achieved with a BOTDA sensor using mono-color cyclic coding., H. Iribas and A. Loayssa wish to acknowledge the financial support of the Spanish Ministerio de Economía y Competitividad through the projects TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R, FEDER funds and the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Compensation of nonlocal effects induced by the extinction ratio of pump pulses in Brillouin optical time-domain analysis sensors

  • Mariñelarena Ollacarizqueta, Jon
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We demonstrate a technique to compensate the nonlocal effects that appear in Brillouin optical time-domain analysis sensors when pump pulses with limited extinction ratio are deployed. These recently discovered nonlocal effects are originated in the interaction between the probe wave and the pulse pedestal. Hence, their compensation method is based on deploying a modulation (dithering) of the optical frequency of the probe and pulse pedestal waves that provides a reduction of the effective interaction length between them. This is implemented by taking advantage of the chirp associated to the direct current modulation of a semiconductor laser used as common source for both waves. The net effect of this procedure is that the probe and pulse pedestal waves display efficient Brillouin interaction just at correlation peaks along the fiber where the frequency difference between both waves remains constant. Proof-of-concept experiments in a 25-km sensing link demonstrate the performance of the technique, where large errors of more than 10 MHz in the measurement of the Brillouin frequency shift are completely compensated by introducing a sinusoidal dithering to the laser source., Project TEC2016-76021-C2-1-R (AEI/FEDER,UE); Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous strain and temperature multipoint sensor based on microstructured optical fiber

  • López Aldaba, Aitor
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
In this paper, a new sensor system for simultaneous and independent multipoint strain and temperature measurements is presented. The interrogation of the sensing heads has been carried out by monitoring their FFT phase variations. In particular, two of each microstructured optical fiber (M0F) cavity interference frequencies were used for the measures. This method is independent of the signal amplitude and also avoids the necessity of tracking the wavelength evolution in the spectrum, which can be a handicap when there are multiple interference frequency components with different sensitivities. The sensing heads present birefringent and multimodal properties and therefore both characteristics lead to their own interference with different properties and sensitivities. The multiplexing capability of the sensing heads and the interrogator method has also been tested and validated. Sensors were operated within a range of temperature 30°C-80°C and a deformation of ̴450 με was applied. Crosstalk between measurements can be corrected through simple math operations leading to independent and crosstalk-free multipoint and multiparameter sensors., This work was supported in part by the Spanish Comisi´on Interministerial de Ciencia y Tecnolog´ıa within projects TEC2016-76021-C2-1-R and TEC2013-47264-C2-2-R, in part by Cost action MP1401, and in part by FEDER funds from the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Gamma radiation-induced effects over an optical fiber laser: towards new sensing applications

  • Pérez Herrera, Rosa Ana
  • Stancalie, Andrei
  • Cabezudo Sánchez-Valverde, Pablo Miguel
  • Sporea, Dan
  • López-Amo Sáinz, Manuel
In the present work, the effect of gamma radiation on the performance of different types of erbium-doped fibers (EDFs) when they are used in a fiber ring cavity (FRC) configuration is studied. Several pieces of commercial EDF are gamma-ray irradiated with different doses to evaluate the output power variations over time. The influence of different doses, from 150 Gy to 1000 Gy, over the output power level measurement and their amplified spontaneous emission (ASE) are experimentally evaluated both in the C and L bands. By using an FRC configuration we can detect the presence of gamma radiation. We can also estimate the irradiation doses applied to EDFs by measuring the slope of the short-term emission power., This work was supported in part from the Spanish AEI within project TEC2016-76021-C2-1-R, Innocampus, Projects for young researchers UPNA 2019 and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401. The Romanian authors acknowledge the financial support of the Romanian Ministry of Education and Research, under Romanian National Nucleu Program LAPLAS VI—Contract n. 16N/2019., This work was supported in part from the Spanish AEI within project TEC2016-76021-C2-1-R, Innocampus, Projects for young researchers UPNA 2019 and FEDER funds from the European Union are acknowledged. The reported investigations were performed in the frame of the COST Action MP 1401. The Romanian authors acknowledge the financial support of the Romanian Ministry of Education and Research, under Romanian National Nucleu Program LAPLAS VI—Contract n. 16N/2019.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Second-order nonlocal effects mitigation in Brillouin optical time-domain analysis sensors by tracking the Brillouin frequency shift profile of the fiber

  • Mompó Roselló, Juan José
  • Iribas Pardo, Haritz
  • Urricelqui Polvorinos, Javier
  • Loayssa Lara, Alayn
We report on an additional limitation that has been found in Brillouin optical time-domain analysis (BOTDA) sensors due to the so-called second-order nonlocal effects (NLE). Second-order NLE appear in BOTDA setups that deploy a double probe waves to compensate the transfer of energy between the pump pulse and the probe wave, and are related to a spectral distortion of the pump pulse that leads to measurement errors and an effective limit on the maximum probe power that can be deployed in the sensor. We theoretically and experimentally demonstrate that the techniques that have been presented so far in the literature to compensate second-order NLE are only effective in the case that the Brillouin frequency shift (BFS) along the sensing fiber is uniform. However, this requirement for uniformity is not realistic in real world scenarios in which a variety of fibers with different BFS and subjected to different environmental conditions are typically deployed. Therefore, we demonstrate a new method to mitigate the effects of BFS variation in the BOTDA setups that compensate second-order NLE. This method is based on introducing an additional wavelength modulation to the probe wave so as to track the mean BFS changes along the sensing fiber link. With this method, we demonstrate a BOTDA setup that, without coding, distributed amplification, or any other form of performance enhancement, achieves a sensing length of 120 km with 3-m spatial resolution and 2-MHz measurement precision. Moreover, the setup demonstrates, to our knowledge, the largest probe power ever injected in a BOTDA sensing link., This work was supported by the Universidad Pública de Navarra, Feder funds and Spanish Ministerio de Economía y Competitividad through the project TEC2013-47264-C2-2-R and TEC2016-76021-C2-1-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Single longitudinal mode lasers by using artificially controlled backscattering erbium doped fibers

  • Pérez Herrera, Rosa Ana
  • Roldán Varona, Pablo
  • Rodríguez Cobo, Luis
  • López Higuera, José Miguel
  • López-Amo Sáinz, Manuel
In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplfier, an artificially controlled backscattering erbium doped fiber section has been connected. This distributed reflector acts also as a saturable absorber, leading to the generation of tunable and switchable single longitudinal-mode laser emissions. The distributed reflector consists of 9 micro-drilled sections of about 1cm each one and randomly spread throughout 2 meters of highly doped erbium fiber. The total length of the fiber laser is 9.5 m and the laser shows a single mode behavior at all the emitted wavelengths. Using this new kind of reflecting saturable absorber, single and multiple single-mode emissions can be obtained. The achieved laser presents a pump threshold as low as 45 mW and shows up to 8 different single-mode emission lines with an optical signal to noise ratio of 45dB., This work was supported in part by the MINECO/AEI (Ministerio de Economía y Competitividad/Agencia Estatal de Investigación), Spain, under Grant TEC2016-76021-C2-1-R, Grant TEC2016-76021-C2-2-R, and Grant PID2019-107270RB; in part by the Ministerio de Educación, Cultura y Deporte of Spain under Grant FPU2018/02797, and in part by the Projects for Young Researches UPNA 2019 (Universidad Publica de Navarra) and FEDER Funds (European Regional Development Fund).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Distributed dynamic strain sensing via perfect periodic coherent codes and a polarization diversity receiver

  • Mompó Roselló, Juan José
  • Shiloh, Lihi
  • Arbel, Nadav
  • Levanon, Nadav
  • Loayssa Lara, Alayn
  • Eyal, Avishay
Rayleigh scattering-based dynamic strain sensing with high spatial resolution, fast update rate, and high sensitivity is highly desired for applications such as structural health monitoring and shape sensing. A key issue in dynamic strain sensing is the tradeoff between spatial resolution and the Signal-to-Noise Ratio (SNR). This tradeoff can be greatly relaxed with the use of coding. A sequence of optical pulses is injected into the fiber and the detected backscattered signal is cross correlated with the original signal. With the use of coding, SNR is indeed improved, but if the sequence is not well chosen, the resulting Peak to Sidelobe Ratio (PSR) can be rather low. An excellent choice of codes are biphase Legendre sequences which offer near Perfect Periodic Autocorrelation (PPA). Other common issues in Rayleigh scattering-based sensing techniques are signal fading and dynamic range. The former issue can occur due to destructive interference between lightwaves that are scattered from the same spatial resolution cell and, in coherent detection schemes, when the polarization states of the backscattered light and the reference light are mismatched. The latter issue is a concern in phase sensitive schemes which require signal jumps not to exceed 2π. In this paper, a biphase Legendre sequence with 6211 pulses is used in conjunction with polarization diversity scheme and a PM fiber. The setup provides two independent measurements of the sensing fiber complex profile and achieves highly sensitive, distributed dynamic strain sensing with very low probability of fading. In addition, the system can handle both very large perturbation signals and very small perturbation signals. The system operated at a scan rate of ∼107 kHz and achieved spatial resolution of ∼10 cm and sensitivity of ∼1.1mrad/√ Hz. The ratio between the powers of the maximum and minimum excitations that can be measured by the system is 136 dB., This work was supported in part by the Israeli Ministry of Science and Technology and in part by Universidad Pública de Navarra, Feder Funds, and Spanish Ministerio de Economía y Competitividad through the Project TEC2016-76021-1R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Comparison between different structures of suspended-core microstructured optical fibers for volatiles sensing

  • López Torres, Diego
  • López Aldaba, Aitor
  • Elosúa Aguado, César
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
  • López-Amo Sáinz, Manuel
  • Arregui San Martín, Francisco Javier
In this paper, different core structures of microstructured optical fibers (MOFs) for low-finesse Fabry-Perot (FP) sensors are experimentally compared to get the highest sensitivity. These devices are designed for volatile organic compounds (VOCs) measurements. Indium tin oxide (ITO) thin films were deposited by sputtering on the MOFs and different optical fast Fourier transform (FFT) phase responses from the FP were measured for saturated atmospheres of ethanol. It has been demonstrated that the sensitivities of the developed sensors depend strongly on the geometry and the dimensions of the MOF-cores. The sensors show recovery times shorter than 100 s and the baselines are fully recovered after every exposure to ethanol vapors., This research was funded by the financial support of MINECO (Spain) through TEC2016-79367-C2-2-R and TEC 2016-76021-C2-1-R as well as the FEDER funds and Public University of Navarre program PhD grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Spatial-frequency multiplexing of high-sensitivity liquid level sensors based on multimode interference micro-fibers

  • Galarza Galarza, Marko
  • Pérez Herrera, Rosa Ana
  • Leandro González, Daniel
  • Júdez Colorado, Aitor
  • López-Amo Sáinz, Manuel
This paper shows a new fiber optic sensor multiplexed system for liquid level sensing. Biconical fibertapers converging at a 40 mm-long micro-fiber are used as transducers. The tapers are designed to providethe propagation of the two main cylindrical modes in the micro-fiber avoiding higher order modes ormodes with other symmetries. The liquid level is calculated in real time from the measurement of thefrequency and phase components of the spectral interference pattern of the submerged micro-fiber.The system is fully characterized by theoretical simulations in terms of the sensitivity as a function ofthe most responsive parameter, which is the width of the micro-fiber. Phase sensibilities of 3.7 rad/mmare experimentally obtained and values as high as 11.4 rad/mm are theoretically predicted. The strongdependence of the spatial frequency with the width of the micro-fiber has been used to multiplex threesensors in series in this domain. The maximum detected crosstalk between sensors is 0.2 rad/mm., This work was supported by the Spanish Agencia Estatal de investigación within projects TEC2016-76021-C2-1-R, and UNPN15-EE-3167, by the FEDER funds of EU and by the Institute of Smart Cities by means of a postdoctoral fellowship.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic detection of moistures in different construction materials from thermographic images

  • Garrido González, Iván
  • Lagüela López, Susana
  • Sfarra, Stefano
  • Madruga, F. J.
  • Arias Sánchez, Pedro
Moisture is a pathology that damages all type of construction materials, from materials of building envelopes to materials of bridges. Its presence can negatively affect the users’ conditions of indoor comfort. Furthermore, heating and cooling energy demand can be increased by the presence of moist materials. Infrared thermography (IRT) is a common technique in the scientific field to detect moisture areas, because of its non-destructive, non-contact nature. In addition, IRT allows an earlier moisture detection compared to the analysis using visible images. In order to optimize thermographic inspections, this paper presents one of the first methodologies for the automatic detection of moisture areas affecting the surface of construction materials. The methodology is based on the application of visible image processing techniques adapted to thermographic images through the consideration of an image conversion format, a thermal criterion and a thermal and a geometric filter. The precision, recall and F-score parameters obtained are around 83.5%, 73.5% and 72.5%, respectively, considering the false positives/negatives through a series of 12 tests made in different construction materials and ambient conditions, comparing the preliminary results with existing methodologies., Ministerio de Economía y Competitividad | Ref. FPU16/03950, Ministerio de Economía y Competitividad | Ref. TEC2016-76021-C2-2-R, Universidad de Salamanca. Cátedra Iberdrola VIII Centenario