Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Multiparameter sensor based on a multiinterferometric serial configuration for temperature and strain measurements

  • Pérez Herrera, Rosa Ana
  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Novais, Susana
  • Pradas Martínez, Javier
  • López-Amo Sáinz, Manuel
In this work, a multi-parameter point sensor based on the combination of Fabry-Perot (FP) and the anti-resonant (AR) reflecting guidance in cascade configuration is proposed and experimentally demonstrated. This structure, based on FP interference and AR reflecting guidance, was fabricated with two different air micro-cavities. The attained experimental results showed different strain and temperature sensitivities for the antiresonance contribution. However, when analyzing the FP interference, only strain sensitivity was observed, demonstrating that this air micro-cavity was also insensitive to temperature variations., This work was supported by the Spanish AEI projects TEC2016-76021-C2 and PID2019-107270RB-C22, FEDER Funds, the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 838143, Projects for young researches UPNA 2019, “Caja Navarra” and “la Caixa” foundations under agreement LCF/PR/PR13/51080004 and the grant BGP18/00180 of the “Beatriz Galindo” programme from the Spanish Ministry of Science, Innovation and Universities.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Sistema de interrogación multi-sensor basado en multiplexación en longitud de onda y tiempo, Multi-sensor interrogation system based on wavelength and time multiplexing

  • Bravo Acha, Mikel
  • Leandro González, Daniel
  • Pérez González, Asier
  • López-Amo Sáinz, Manuel
En este trabajo se propone un sistema de interrogación versátil y económico basada en la generación de pulsos empleando la modulación directa de diodos láser DFB. Se ha demostrado una resolución en longitud de onda de 1 pm para una separación de sensores de 600m. La validación del interrogador se ha llevado a cabo monitorizando una red de sensores de 26 km de longitud que incluye redes de difracción de Bragg, reflectores y un interferómetro Fabry-Pérot., This work proposes a versatile and cost-effective interrogation system based on pulses generation using direct modulated DFB laser diodes. A wavelength resolution of 1 pm is demonstrated for a 600 m sensor-spacing. A 26 km-long sensor network including fiber Bragg gratings, wideband reflectors and a Fabry-Pérot interferometer is used to validate the interrogator., Este trabajo ha sido financiado por los proyectos TEC2016-76021-C2 y PID2019-107270RB-C22, los fondos FEDER, la European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 838143, el contrato Beatriz Galindo BEAGAL18/00116 y las fundaciones 'Caja Navarra' y 'la Caixa' con el proyecto LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A comparative analysis of the water and carbon footprints of hybrid, plant-based, and animal-based burgers

  • Domínguez-Lacueva, Paula
  • Beriain Apesteguía, María José
  • Martínez Aldaya, Maite
Food production represents a complex sustainability challenge, including climate change and freshwater scarcity. In order to promote the incorporation of sustainable prepared protein dishes into the agrifood market, this study aims to assess the environmental performance of three different burgers: a beef burger, a plant-based burger (soy, beans, and rice), and a hybrid burger (50-50 composition) by comparing the water use and the CO<inf>2</inf> emissions relative to their nutritional value. The environmental indicators used to perform the current study were the water footprint, the carbon footprint (CF), and their respective nutritional productivity indexes (considering fats, proteins, and carbohydrates). The water needed to produce the beef burger was 1.8 times greater than the quantity needed to produce the hybrid burger, and 21 times greater in the case of the plant-based one. In turn, regarding the CF, the beef burger emitted approximately 2 times more kgCO<inf>2</inf>e along the supply chain when compared with the hybrid burger, and 13 times more than the plant-based one. However, because the meat burger comes from cattle raised on grasslands, the greenhouse gas emissions are likely lower than those from other, less sustainable forms of beef production. The plant-based burger was, therefore, more sustainable in terms of water use and carbon emissions relative to the nutrition productivity index than the meat and hybrid options., The project leading to these results received funding from ‘la Caixa’ and the Caja Navarra Foundation under Agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Exploring genomic diversity and reproductive strategies in three expansion phases of the superdominant Brachypodium rupestre in high mountain grasslands

  • Durán Lázaro, María
  • Campos, Miguel
  • Ben-Menni, Samira
  • Sotomayor Alge, Alba
  • Catalán, Pilar
  • San Emeterio Garciandía, Leticia
  • Canals Tresserras, Rosa María
Tall-grass expansion in natural plant communities is a concern under current global change scenarios. Driven by factors such as community vulnerability and the competitive abilities of tall-grass species, this phenomenon is exemplified by Brachypodium rupestre (Host) Roem. and Schult, a perennial tall-grass native to Europe. B. rupestre spreads aggressively in the grasslands of the western Pyrenees due to a disrupted regime of lack of herbivory and recurrent burnings that has persisted over several decades. This study aims to investigate whether the contrasted managements of grazing, abandonment and burnings have promoted specific reproductive traits and impacted the population genomics of B. rupestre. Nine sites varying in cover of B. rupestre classified into three expansion phases associated to different management regimes were monitored: (i) scattered populations in multispecific grazed sites, (ii) stand populations expanding at sites of relaxed grazing or abandonment, and (iii) superdominant populations constituting dense degraded covers in recurrently burned sites. ddRADseq data showed high genomic diversity but relatively low genomic structure, likely due to substantial gene flow and the absence of wind barriers. The standardized index of association supported asexual reproduction in all populations, which is coupled with sexual reproduction. Contrasting management practices did not promote distinct genomic identities between expansion phases; rather, the genetic differentiation and divergence of populations responded to life history and spatial isolation, even within a small geographic area. The similar levels of genetic diversity and the significantly different number of clones between expansion phases suggest a complex pattern of genotypic and clonal variability, which may be influenced by environmental factors (historical disturbance regimes)., Open Access funding provided by Universidad Pública de Navarra. This study was financially supported by the Spanish Ministry of Science and Innovation through different projects (PID2020-116786RB-C31, PID2022-140074NB-I00, TED2021-131073B-I00 and PDC2022-133712-I00), and by the Spanish Aragon Government (Bioflora A01-23R). MD was supported by an UPNA's doctorate scholarship, LS by La Caixa and CAN Foundations (LCF/PR/PR13/51080004), MC by a predoctoral FPI fellowship of the Spanish Ministry of Science, AS by a predoctoral FPI fellowship of the Aragon Government and SB-M by a Spanish Ministry of Universities Margarita Salas postdoctoral contract.