Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Beyond the Moore-Penrose inverse: Strategies for the estimation of digital predistortion linearization parameters

  • Gilabert Pinal, Pere Lluís
  • Braithwaite, R. Neil
  • Montoro López, Gabriel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Digital predistortion (DPD) is the linearization technique most often used to cope with the inherent tradeoff between linearity and efficiency in power amplifiers (PAs). Adaptation is needed to optimize DPD performance. This article reviews strategies for estimating the parameters controlling the DPD linearizer., This work was supported in part by the Spanish Government and Fonds Européen de Développement Économique et Régional under Ministerio de Ciencia, Innovación y Universidades projects TEC2017-83343- C4-1-R and TEC2017-83343-C4-2-R and by the Generalitat de Catalunya under Grant 2017 SGR 813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Input-output equivalent sources method for fast simulations of distributed nonlinearities in bulk acoustic wave resonators and filters

  • Collado Gómez, Juan Carlos
  • González Rodríguez, Marta
  • Mateu Mateu, Jordi
  • Perea Robles, Rafael
  • Aigner, Robert
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work presents a new method to analyze weak distributed nonlinear effects, with focus on the generation of harmonics (H) and intermodulation products (IMD) in bulk acoustic wave resonators and filters composed of them. The method consists of finding equivalent current sources (Input-Output Equivalent Sources) at the H or IMD frequencies of interest, that are applied to the boundary nodes of any layer that can contribute to the nonlinearities according to its local nonlinear constitutive equations. The new methodology is compared with the harmonic balance analysis, by means of a commercial tool, of a discretized nonlinear Mason model, which is the most used model for nonlinear bulk acoustic wave resonators. While the computation time is drastically reduced, the results are fully identical. For the simulation of a 7th order filter, the Input-Output Equivalent Sources method is around 700 times faster than the harmonic balance simulations., This work was supported in part by the Catalan Gov. through grant 2017 SGR 813, and by the Spanish Gov through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tone injection-based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • González Arbesú, José María
  • Mateu Mateu, Jordi
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This is the pre-peer reviewed version of the following article: González‐Rodríguez, M., Collado, C., González‐Arbesú, J. M., Mateu, J., Montoro, G., & Gilabert, P. L. (2021). Tone injection‐based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators. Microwave and Optical Technology Letters, 63(3), 781-786, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/mop.32670. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., A technique for the reduction of third-order intermodulation distortion (IMD3) occurring in bulk acoustic wave (BAW) filters and multiplexers is presented. The method consists of using the intrinsic second-order intermodulation distortion generated by BAW filters and multiplexers themselves by injecting an externally controlled amplitude and phase modulated signal at low frequency to compensate for the IMD3. The proposed technique has been experimentally verified by performing IMD3 measurements in a single BAW resonator subject to several modulated signals under a nonlinear scenario., Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund, Grant/Award Number: FI_B-00136; Spanish Government, Grant/Award Numbers: 2017 SGR-813,TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, Peer Reviewed, Postprint (author's final draft)