Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Role of SiO2 layers in third-order nonlinear effects of temperature compensated BAW resonators

  • García Pastor, David
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Aigner, Robert
This work applies a comprehensive nonlinear characterization process of two Temperature Compensated Bulk Acoustic Wave (TC-BAW) resonators. In both resonators, the SiO 2 layers have a remarkable impact on the generation of third- order intermodulation products (IMD3), confirming the impact of the SiO 2 on the generation of passive intermodulation. A unified model considering the electro-thermo-mechanical constitutive relations of the piezoelectricity is used, that allows to discern on the origin of the IMD3, either it comes from intrinsic nonlinearities of the materials, or from self-heating mechanisms., This work was supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813. With the support of the Universities and Research Secretary of the Generalitat de Catalunya and the European Social Fund through grant 2018FI_B_00448, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Practical issues on the implementation of acoustic transversal filters

  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
This paper evaluates important aspect of acoustic filters based on a transversal configuration in order to foreseen the potential and limitations of this new configuration. These aspects are: effects of the losses of the resonators and external components, such as capacitors and inductors, sensitivity on the deviation of the impedance and resonant frequency of the resonators and effects of having a non-ideal balun. This study has been performed in a sixth order filter with asymmetric position of the transmission zeros., Work supported by TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, 2017 SGR 813, ESA- 400012413/18/NL/CRS., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fast simulation method of distributed nonlinearities in surface acoustic wave resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Aigner, Robert
  • Huebner, Sebatian
Understanding the mechanism of nonlinearity in SAW/BAW devices is growing up in importance because these, even being weak, can cause desensitization of the receivers and limiting their performance. Proper nonlinear distributed models have been extensively used, usually running Harmonic Balance (HB) simulations being in some cases very time consuming. The motivation of this work is to apply a new method of analysis for the simulation of harmonics (H) and intermodulation products (IMD) generation in SAW devices. The method is called the Input-Output Equivalent Sources (IOES) and it allows extremely fast and robust simulations of large distributed weak nonlinear circuits., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813. Research wasalso supported by the Secretary of Universities and Research of the Generalitatde Catalunya and the European Social Fund through grant FI_B-00136., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

High temperatures BVD model for AlN-based solidly mounted resonators

  • Lugo Hernández, Eduardo
  • Mirea, Teona
  • Carmona Cejas, Jose Manuel
  • Clement Lorenzo, Marta
  • Olivares Roza, Jimena
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
In this paper we present an updated version of the well-known one dimensional model for Solidly Mounted Resonators (SMRs) based on Aluminum Nitride (AIN) for harsh environments at 2.4 GHz in sensing applications. Our model covers from 22°C up to 422°C and presents this performance. Qa=900,Or=350 and keff=6.17% at 22°C to a Qa=380,Qr=150 and keff=5.48% at 422°C Also we have verified our model using measurements from fabricated SMRs with an acoustic reflector of seven alternating layers of low and high acoustic impedance., This work was supported by the next projects: TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, TEC2017-84817-C2-1-R, 2017 SGR-813 and Conacyt-México., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comprehensive nonlinear characterization and modeling of a BAW duplexer

  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
This paper performs a comprehensive nonlinear modeling of a Bulk Acoustic Wave (BAW) duplexer operating at the band 7 of the LTE wireless communication standard. The modeling starts by an accurate characterization of the resonators forming the filters by performing measurements of the second harmonic (H2). The modeling of individual resonators has then been used to predict second order nonlinear manifestations occurring in a real duplexer. These are H2, second order intermodulation products (IMD2), for the case where a jamming signal is set to low frequencies (IMD2-Low) and when the jamming signal is set to high frequencies (IMD2-High). Predicted results are then validated with real measurements., The authors would like to thank Qorvo Inc. for providing the on-wafer measurements that appear in this article. Work supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Linealización digital de transmisores mediante redes neuronales no lineales

  • López Bueno, David
  • Pham, Thi Quynh Anh
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This paper presents an overview on how the artificial neural networks (ANN) are applied to digitally linearize modern transmitters. The use of nonlinear ANNs is intended to either assist or replace the traditional crest factor reduction (CFR) and digital predistortion (DPD) building blocks, and benefit from their inherently good approximation capabilities and reduced hardware complexity when targeting complex transceiver scenarios such as those present in 5G. There is not a universal procedure to set up the best ANN given a specific application. However, in this paper some design considerations which have been experimentally validated in the literature will be summarized both considering single-antenna and multi-antenna transmitters. Finally, some principles in the selection of ANN parameters for nonlinear modeling will be showcased by using asimulation test bench that employs measured data from a strongly non-linear GaN PA operated with wideband signals., Agradecemos el soporte y financiación recibidos por el Gobierno de España (MICINN) y FEDER en el marco de los proyectos TEC2017-83343-C4-2-R y RTI2018-099841-B-I00, y por la Generalitat de Catalunya bajo las ayudas 2017 SGR 813 y 2017 SGR 891., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analytical modeling method of thermal spreading resistance in BAW filters

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Aigner, Robert
As the power requirements in BAW filters steadily increase, thermal behaviour emerges as a key asset to ensure device performance and reliability. Under these conditions, self-heating mechanisms drive to possible situations where the filters no longer meet the electrical specifications. In addition to that, the evaluation of the heat spreading might help to define the resonators and pillars distribution along with the overall performance of current BAW filters. In the past, numerical methods based on FEM have been used to study the temperature distribution under high-power (HP) signals, lacking efficiency in terms of computational time. The motivation of this work is to describe an analytical method that is able to simulate very fast, without the need of costly FEM simulation, the heat spreading in a filter according to the spatial distribution of the resonators., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4- 2-R and 2017 SGR-813. Research was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant FI_B00136, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Beyond the Moore-Penrose inverse: Strategies for the estimation of digital predistortion linearization parameters

  • Gilabert Pinal, Pere Lluís
  • Braithwaite, R. Neil
  • Montoro López, Gabriel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Digital predistortion (DPD) is the linearization technique most often used to cope with the inherent tradeoff between linearity and efficiency in power amplifiers (PAs). Adaptation is needed to optimize DPD performance. This article reviews strategies for estimating the parameters controlling the DPD linearizer., This work was supported in part by the Spanish Government and Fonds Européen de Développement Économique et Régional under Ministerio de Ciencia, Innovación y Universidades projects TEC2017-83343- C4-1-R and TEC2017-83343-C4-2-R and by the Generalitat de Catalunya under Grant 2017 SGR 813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Design and digital predistortion linearization of a wideband outphasing amplifier supporting 200 MHz bandwidth

  • Gilabert Pinal, Pere Lluís
  • Vegas, David
  • Ren, Zhixiong
  • Montoro López, Gabriel
  • Pérez-Cisneros, José Ramón
  • Ruiz, Nieves
  • Si, Xiaoshu
  • García García, José Ángel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a holistic approach to design and linearize a wideband outphasing power amplifier (PA) to efficiently amplify a 200 MHz bandwidth (BW) signal compliant with the Data Over Cable Service Interface Specification (DOCSIS) standard. The proposed outphasing PA, based on a load insensitive GaN HEMT class-E topology, was designed to face the trade-off between the output power control range to be covered with high efficiency and the desired BW. Operated following an isogain approach, the linearity performance is ensured by applying digital predistortion linearization, which combined with crest factor reduction (CFR) techniques can enhance the overall power efficiency. An 18.7 % average efficiency has been measured when fitting the standard in-band and out-of-band linearity requirements for a 26.3 dBm 64 QAM DOCSIS signal with 12.2 dB of PAPR., This project was funded by Huawei Technologies from March 2017 to April 2019. In addition, the work was supported in part by the Spanish Government (Ministerio de Ciencia Innovación y Universidades) and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant TEC2017-83343-C4-1-R and TEC2017-83343-C4-2-R; and in part by the Generalitat de Catalunya under Grant 2017 SGR 813., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear performance on acoustic transversal filters

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
The recently proposed transversal topology for creating acoustic filters allows to achieve arbitrary filter responses, in terms of position of transmission zeros and bandwidth, among others. This new topology might indeed help to give response to the demanding filter specification of the recent and future wireless communication systems, some not yet achievable with the conventional ladder configuration used in acoustic technology. Full success of the transversal configuration to this end also requires meeting decent nonlinear responses. This work makes use of a comprehensive nonlinear equivalent circuit model to analyze and evaluate the nonlinear response, in particular the second harmonic (H2), of acoustic transversal filters. This work evaluates the effects of the filter bandwidth, electro-acoustic coupling and goes one step further to propose variation of the topology to provide filter responses with reduced nonlinear effects., Work supported by the Spanish Government through grants TEC2017- 84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Wideband transversal acoustic wave filters. Application to connected cars

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
This paper presents the synthesis and circuit transformations of acoustic wave filters based on a transversal arrangement of the individual resonators. This configuration allows for the synthesis of any filter response without detrimental of the limited value of the electro-acoustic coupling coefficient. The synthesis can be performed in the low-pass domain to be latter transformed into the band-pass domain. This latter step results in significant differences between the low-pass and the band-pass responses in wideband stringent filters. This work, after an initial synthesis in the low-pass domain, directly applies the pass-band circuit transformation achieving a more accurate synthesized network even for wideband filters., This work has been supported by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Input-output equivalent sources method for fast simulations of distributed nonlinearities in bulk acoustic wave resonators and filters

  • Collado Gómez, Juan Carlos
  • González Rodríguez, Marta
  • Mateu Mateu, Jordi
  • Perea Robles, Rafael
  • Aigner, Robert
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work presents a new method to analyze weak distributed nonlinear effects, with focus on the generation of harmonics (H) and intermodulation products (IMD) in bulk acoustic wave resonators and filters composed of them. The method consists of finding equivalent current sources (Input-Output Equivalent Sources) at the H or IMD frequencies of interest, that are applied to the boundary nodes of any layer that can contribute to the nonlinearities according to its local nonlinear constitutive equations. The new methodology is compared with the harmonic balance analysis, by means of a commercial tool, of a discretized nonlinear Mason model, which is the most used model for nonlinear bulk acoustic wave resonators. While the computation time is drastically reduced, the results are fully identical. For the simulation of a 7th order filter, the Input-Output Equivalent Sources method is around 700 times faster than the harmonic balance simulations., This work was supported in part by the Catalan Gov. through grant 2017 SGR 813, and by the Spanish Gov through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

N-Plexer and N-Band acoustic filters based on transversal configuration

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
This work shows the feasibility of using filters with transversal configuration to create N-Plexers and N-Band responses, by directly connecting several BAW filters in a transversal manner. The new multi-filtering solutions might indeed help on the existing and forthcoming challenges for LTE or 5G, such as the efficient management of the limited spectrum allocation or the non-contiguous spectrum, with the aim of increasing the network capacity and higher data rates. The filter arrangement proposed shows as well flexibility on dynamic scenarios like the ones occurring in a Carrier Aggregation (CA) access [1]., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813 and ESA Contract No. 400012413/18/NL/CRS., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of border ring modes on SMR-BAW resonators

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Aigner, Robert
An equivalent circuit model is proposed in order to model the Border Ring (BR) spurious modes on Type I Solidly Mounted Resonators (SMR) BAW resonators and the cancellation of the in-band lateral modes that the BR frame produces. The model has been validated through FEM simulations and with measurements of resonators. It predicts the electrical response of the BR effects for different resonators and BR sizes., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tone injection-based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • González Arbesú, José María
  • Mateu Mateu, Jordi
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This is the pre-peer reviewed version of the following article: González‐Rodríguez, M., Collado, C., González‐Arbesú, J. M., Mateu, J., Montoro, G., & Gilabert, P. L. (2021). Tone injection‐based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators. Microwave and Optical Technology Letters, 63(3), 781-786, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/mop.32670. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., A technique for the reduction of third-order intermodulation distortion (IMD3) occurring in bulk acoustic wave (BAW) filters and multiplexers is presented. The method consists of using the intrinsic second-order intermodulation distortion generated by BAW filters and multiplexers themselves by injecting an externally controlled amplitude and phase modulated signal at low frequency to compensate for the IMD3. The proposed technique has been experimentally verified by performing IMD3 measurements in a single BAW resonator subject to several modulated signals under a nonlinear scenario., Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund, Grant/Award Number: FI_B-00136; Spanish Government, Grant/Award Numbers: 2017 SGR-813,TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, Peer Reviewed, Postprint (author's final draft)