Pasar al contenido principal

SENSORES GRAVIMETRICOS DE GASES BASADOS EN RESONADORES ELECTRO-ACUSTICOS DE ALN PARA APLICACIONES EN TEMPERATURAS EXTREMAS

TEC2017-84817-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Wideband transversal acoustic wave filters. Application to connected cars

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Aigner, Robert
This paper presents the synthesis and circuit transformations of acoustic wave filters based on a transversal arrangement of the individual resonators. This configuration allows for the synthesis of any filter response without detrimental of the limited value of the electro-acoustic coupling coefficient. The synthesis can be performed in the low-pass domain to be latter transformed into the band-pass domain. This latter step results in significant differences between the low-pass and the band-pass responses in wideband stringent filters. This work, after an initial synthesis in the low-pass domain, directly applies the pass-band circuit transformation achieving a more accurate synthesized network even for wideband filters., This work has been supported by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tone injection-based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • González Arbesú, José María|||0000-0002-9601-0988
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
This is the pre-peer reviewed version of the following article: González‐Rodríguez, M., Collado, C., González‐Arbesú, J. M., Mateu, J., Montoro, G., & Gilabert, P. L. (2021). Tone injection‐based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators. Microwave and Optical Technology Letters, 63(3), 781-786, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/mop.32670. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., A technique for the reduction of third-order intermodulation distortion (IMD3) occurring in bulk acoustic wave (BAW) filters and multiplexers is presented. The method consists of using the intrinsic second-order intermodulation distortion generated by BAW filters and multiplexers themselves by injecting an externally controlled amplitude and phase modulated signal at low frequency to compensate for the IMD3. The proposed technique has been experimentally verified by performing IMD3 measurements in a single BAW resonator subject to several modulated signals under a nonlinear scenario., Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund, Grant/Award Number: FI_B-00136; Spanish Government, Grant/Award Numbers: 2017 SGR-813,TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Efficient and accurate electromagnetic scattering analysis of perfectly conducting thick plates

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The scattering analysis with the Electric-Field Integral Equation by the Method of Moments of perfectly conducting plates is normally carried out through the thin-plate approximation, which models the closed surface as an open surface and discards the influence of the plate rim. The resulting accuracy is accepted in many practical applications as long as the thickness of the plate is small enough. However, in the scattering analysis of plates with grazing incidences, the thin-plate approximation gives rise to severe inaccuracies. In this paper, we present a new numerical approach, which we name thick-plate formulation, for the accurate computation of the current and the RCS for a plate with nonzero thickness. Our scheme provides similar accuracy as the solution obtained with the full modelling of the plate and with less computational time., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologı́a (CICYT) under projects TEC2016-78028-C3-1-P , TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Grid-robust discretization of integral equations in the electromagnetic scattering analysis of homogeneous targets with geometric singularities

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The conventional method-of-moment schemes of discretization for the scattering analysis of homogeneous targets, perfectly conducting or dielectric, rely on edge-based basis functions. This restricts the modelling of the targets to conformal meshes, with all adjacent facets sharing one single edge. Prior to the electromagnetic analysis, edge-based schemes require the execution of edge search algorithms in order to establish the set of interior edges of the mesh. On the other hand, flaws in the mesh generation may give rise to an incomplete identification of the interior edges and a wrong modelling of the currents. Recently introduced facet-based schemes of discretization of surface integral equations, with volumetric testing, have exhibited improved accuracy in the analysis of targets with geometric singularities. Since facet-based schemes ignore by definition edges, they are better suited than the edge-based schemes for the robust analysis of slightly defective meshes, e.g. with unconnected vertices or misaligned edges., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologıá (CICYT) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Geometric algebra formulation of the Calderon Projector

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
Geometric Algebra provides a mathematical frame-work that allows to express many equations of physics in a more compact way [1]. It unifies the electric and the magnetic field in a single mathematical object: a multivector. Then, the four Maxwell’s equations can be written as a single one. Here we study how the integral formulation of the electromagnetic field in Geometric Algebra naturally embeds the Calderon Projector when the field is evaluated in a surface., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects TEC2016-78028-C3-1-P and TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fast analysis and optimization of sparsely distributed partial modification problems

  • Fang, Xiaoxing
  • Heldring, Alexander|||0000-0003-2011-2096
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Cao, Qunsheng
This article addresses the efficient numerical analysis of sparsely distributed small modifications in a large structure, that is, the sparsely distributed partial modification problem (SDPMP). A hierarchical matrix (H-matrix)-based fast direct solver is adopted to solve the SDPMP in a very short time for each new set of modifications. The main idea of this method is to reuse the parts of the compressed inverse matrix operator that do not change and only recompute the modified parts. In contrast with already existing algorithms designed to tackle a single localized modification, this new approach is still very fast for sparsely distributed small modifications, so it becomes a very attractive option to solve optimization problems efficiently, due to the very cheap analysis of the modified structure at each iteration of the optimization procedure. The efficiency of the solution of SDPMP is demonstrated for several cases involving passive and active metasurfaces and a reconfigurable antenna. As a practical example, a programmable metasurface reflector is optimized with particle swarm optimization to obtain a prescribed reflection pattern., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219; in part by the China Scholarship Council under Grant 201906830042; in part by the Startup Foundation for Introducing Talent of the Nanjing University of Information Science and Technology (NUIST) under Grant 2022r079; in part by the Ministerio de Ciencia e Innovacion (MICINN) under Project PID2019- 107885GB-C31/AEI/10.13039/501100011033, Project PID2020-113832RBC21/AEI/10.13039/501100011033, and Project TEC2017-84817-C2-2-R/AEI/ 10.13039/501100011033; and in part by the Unidad de Excelencia Maria de Maeztu, which is financed by the Agencia Estatal de Investigación, Spain, under Grant MDM-2016-0600/AEI/10.13039/501100011033; and in part by the Catalan Agency for Management of University and Research Grants (AGAUR) under Research Group under Grant 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Accurate, grid-robust and versatile combined-field discretization for the electromagnetic scattering analysis of perfectly conducting targets

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Heldring, Alexander|||0000-0003-2011-2096
Recent implementations of the Electric-Field Integral Equation (EFIE) for the electromagnetic scattering analysis of perfectly conducting targets rely on the electric current expansion with the monopolar-RWG basis functions, discontinuous across mesh edges, and the field testing over volumetric subdomains attached to the surface boundary triangulation. As compared to the standard RWG-based EFIE-approaches, normally continuous across edges, these schemes exhibit enhanced versatility, allowing the analysis of geometrically non-conformal meshes, and improved accuracy, especially for subwavelength sharp-edged conductors. In this paper, we present a monopolar-RWG discretization by the Method of Moments (MoM) of the Combined-Field Integral Equation (CFIE) resulting from the addition of a volumetrically tested discretization of the EFIE and the Galerkin tested MFIE-implementation. We show for sharp-edged conductors the degree of improved accuracy in the computed RCS and the convergence properties in the iterative search of the solution. More importantly, as we show in the paper, these implementations become in practice advantageous because of their robustness to flaws in the grid generation or their agility in handling complex meshes arising from the interconnection of independently meshed domains. The hybrid RWG/monopolar-RWG discretization of the CFIE defines the RWG discretization over geometrically conformal and smoothly varying mesh regions and inserts the monopolar-RWG expansion strictly at sharp edges, for improved accuracy purposes, or over boundary lines between partitioning mesh domains, for the sake of enhanced versatility. These hybrid schemes offer similar accuracy as their fully monopolar-RWG counterparts but with fewer unknowns and allow naturally non-conformal mesh transitions without inserting additional inter-domain continuity conditions or new artificial currents., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologı́a (CICYT) under projects TEC2016-78028-C3-1- P, TEC2017-84817-C2-2- R, and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

High temperatures BVD model for AlN-based solidly mounted resonators

  • Lugo Hernández, Eduardo|||0000-0001-9666-1329
  • Mirea, Teona
  • Carmona Cejas, Jose Manuel
  • Clement Lorenzo, Marta
  • Olivares Roza, Jimena
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
In this paper we present an updated version of the well-known one dimensional model for Solidly Mounted Resonators (SMRs) based on Aluminum Nitride (AIN) for harsh environments at 2.4 GHz in sensing applications. Our model covers from 22°C up to 422°C and presents this performance. Qa=900,Or=350 and keff=6.17% at 22°C to a Qa=380,Qr=150 and keff=5.48% at 422°C Also we have verified our model using measurements from fabricated SMRs with an acoustic reflector of seven alternating layers of low and high acoustic impedance., This work was supported by the next projects: TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, TEC2017-84817-C2-1-R, 2017 SGR-813 and Conacyt-México., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

N-Plexer and N-Band acoustic filters based on transversal configuration

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
This work shows the feasibility of using filters with transversal configuration to create N-Plexers and N-Band responses, by directly connecting several BAW filters in a transversal manner. The new multi-filtering solutions might indeed help on the existing and forthcoming challenges for LTE or 5G, such as the efficient management of the limited spectrum allocation or the non-contiguous spectrum, with the aim of increasing the network capacity and higher data rates. The filter arrangement proposed shows as well flexibility on dynamic scenarios like the ones occurring in a Carrier Aggregation (CA) access [1]., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813 and ESA Contract No. 400012413/18/NL/CRS., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Role of SiO2 layers in third-order nonlinear effects of temperature compensated BAW resonators

  • García Pastor, David|||0000-0002-6491-0746
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Aigner, Robert
This work applies a comprehensive nonlinear characterization process of two Temperature Compensated Bulk Acoustic Wave (TC-BAW) resonators. In both resonators, the SiO 2 layers have a remarkable impact on the generation of third- order intermodulation products (IMD3), confirming the impact of the SiO 2 on the generation of passive intermodulation. A unified model considering the electro-thermo-mechanical constitutive relations of the piezoelectricity is used, that allows to discern on the origin of the IMD3, either it comes from intrinsic nonlinearities of the materials, or from self-heating mechanisms., This work was supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813. With the support of the Universities and Research Secretary of the Generalitat de Catalunya and the European Social Fund through grant 2018FI_B_00448, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Synthesis procedure for ladder acoustic wave filters starting in series resonator

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
This work provides a new procedure to synthesize acoustic wave ladder filters starting with series resonators. The novelty of this method relies in a new synthesis methodology to extract a series inductance in filter configurations starting in series resonators. As a matter of fact, this new synthesis provides solutions with a reduced value of the electrostatic capacitance, thereby giving resonators with smaller size., This work have been supported by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4- 2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Comprehensive nonlinear characterization and modeling of a BAW duplexer

  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
This paper performs a comprehensive nonlinear modeling of a Bulk Acoustic Wave (BAW) duplexer operating at the band 7 of the LTE wireless communication standard. The modeling starts by an accurate characterization of the resonators forming the filters by performing measurements of the second harmonic (H2). The modeling of individual resonators has then been used to predict second order nonlinear manifestations occurring in a real duplexer. These are H2, second order intermodulation products (IMD2), for the case where a jamming signal is set to low frequencies (IMD2-Low) and when the jamming signal is set to high frequencies (IMD2-High). Predicted results are then validated with real measurements., The authors would like to thank Qorvo Inc. for providing the on-wafer measurements that appear in this article. Work supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Practical issues on the implementation of acoustic transversal filters

  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Aigner, Robert
This paper evaluates important aspect of acoustic filters based on a transversal configuration in order to foreseen the potential and limitations of this new configuration. These aspects are: effects of the losses of the resonators and external components, such as capacitors and inductors, sensitivity on the deviation of the impedance and resonant frequency of the resonators and effects of having a non-ideal balun. This study has been performed in a sixth order filter with asymmetric position of the transmission zeros., Work supported by TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, 2017 SGR 813, ESA- 400012413/18/NL/CRS., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear performance on acoustic transversal filters

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Aigner, Robert
The recently proposed transversal topology for creating acoustic filters allows to achieve arbitrary filter responses, in terms of position of transmission zeros and bandwidth, among others. This new topology might indeed help to give response to the demanding filter specification of the recent and future wireless communication systems, some not yet achievable with the conventional ladder configuration used in acoustic technology. Full success of the transversal configuration to this end also requires meeting decent nonlinear responses. This work makes use of a comprehensive nonlinear equivalent circuit model to analyze and evaluate the nonlinear response, in particular the second harmonic (H2), of acoustic transversal filters. This work evaluates the effects of the filter bandwidth, electro-acoustic coupling and goes one step further to propose variation of the topology to provide filter responses with reduced nonlinear effects., Work supported by the Spanish Government through grants TEC2017- 84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of border ring modes on SMR-BAW resonators

  • Udaondo Guerrero, Carlos|||0000-0002-4251-0530
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Aigner, Robert
An equivalent circuit model is proposed in order to model the Border Ring (BR) spurious modes on Type I Solidly Mounted Resonators (SMR) BAW resonators and the cancellation of the in-band lateral modes that the BR frame produces. The model has been validated through FEM simulations and with measurements of resonators. It predicts the electrical response of the BR effects for different resonators and BR sizes., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analytical modeling method of thermal spreading resistance in BAW filters

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • González Arbesú, José María|||0000-0002-9601-0988
  • Aigner, Robert
As the power requirements in BAW filters steadily increase, thermal behaviour emerges as a key asset to ensure device performance and reliability. Under these conditions, self-heating mechanisms drive to possible situations where the filters no longer meet the electrical specifications. In addition to that, the evaluation of the heat spreading might help to define the resonators and pillars distribution along with the overall performance of current BAW filters. In the past, numerical methods based on FEM have been used to study the temperature distribution under high-power (HP) signals, lacking efficiency in terms of computational time. The motivation of this work is to describe an analytical method that is able to simulate very fast, without the need of costly FEM simulation, the heat spreading in a filter according to the spatial distribution of the resonators., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4- 2-R and 2017 SGR-813. Research was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant FI_B00136, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Updated BVD modeling of AlN-based solidly mounted resonators working at cryogenic and high temperatures: from -160°C up to 130°C

  • Lugo Hernández, Eduardo|||0000-0001-9666-1329
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Carmona Cejas, José Manuel
  • Mirea, Teona
  • Olivares Roza, Jimena
In this work we theoretically and experimentally assess the behavior of AlN-based Solidly Mounted Resonators (SMR) at cryogenic and high temperatures. This study can be useful for precise behavior prediction of SMR sensors working as gas detectors in the food preservation industry, or the industrial and automotive ones. We have subjected SMRs to temperatures from -160°C up to 130°C in high vacuum conditions (6×10 -7 mBar) and compared their experimental performance to a modelled one. We employed an updated mBVD model that includes low temperatures effects, and we show good accuracy between data. Our SMRs have fairly preserved their quality factors and electromechanical coupling factors at both cryogenic and high temperatures: Qa= 482, Qr = 288 and k eff = 6.30% at -160°C to a Qa = 477, Qr = 265 and k eff = 6.39% at 130°C., This work was supported by the next projects: TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, TEC2017-84817-C2-1-R, 2017 SGR-813 and Conacyt-México., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fast simulation method of distributed nonlinearities in surface acoustic wave resonators

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • González Arbesú, José María|||0000-0002-9601-0988
  • Aigner, Robert
  • Huebner, Sebatian
Understanding the mechanism of nonlinearity in SAW/BAW devices is growing up in importance because these, even being weak, can cause desensitization of the receivers and limiting their performance. Proper nonlinear distributed models have been extensively used, usually running Harmonic Balance (HB) simulations being in some cases very time consuming. The motivation of this work is to apply a new method of analysis for the simulation of harmonics (H) and intermodulation products (IMD) generation in SAW devices. The method is called the Input-Output Equivalent Sources (IOES) and it allows extremely fast and robust simulations of large distributed weak nonlinear circuits., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813. Research wasalso supported by the Secretary of Universities and Research of the Generalitatde Catalunya and the European Social Fund through grant FI_B-00136., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Acceleration of Born series by change of variables

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
In this work, we propose a method to enhance the convergence of the Born series. The Born series is widely used in scattering theory, but its convergence is only guaranteed under certain restrictive conditions which limit the cases where this formulation can be applied. The proposed method, based on modifying the singularities of the resolvent operator by a change of variables, accelerates the convergence of the series or even achieves convergence in otherwise divergent cases. Due to its low computational cost and ease of implementation, the method preserves the advantages of the Born series while it extends its range of application. It can also be applied to a variety of methods relying on the same mathematical principles as the Born series. Numerical examples are provided to show that a significant improvement can be achieved with simple techniques and with a limited knowledge about the operator spectrum., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, MDM2016-0600, TEC2017-83343-C4-2-R, TEC2017-84817-C2-2-R, PID 2019-107885GB-C31 and Catalan Research Group 2017 SGR 219; and by Secretary of Universities and Research of the Ministry of Business and Knowledge of the Generalitat of Catalonia and European Social Fund under scholarship 2019 FI B00788., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

GRECO: 30 years of graphical processing techniques for RCS computation

  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
This contribution to the special session in honor of Prof. Rafael Gómez-Martín will address the 30 year development of graphical processing techniques (GRECO) for fast computation of Radar Cross Section (RCS) of electrically large and complex targets. The development of GRECO started in 1988, in the frame of the “Applied research project for the development and validation of numerical methods for RCS prediction, analysis and optimization”, in which I had the pleasure to know Rafael since our groups where participating together in the project. The development of GRECO never stopped, and recently it has been updated by replacing the graphical processing technique for computation of surface reflection and edge diffraction by a hybrid CPU-graphical processing approach. The resulting code has the same accuracy as conventional RCS computation techniques, but detection of shadowed surfaces and edges is one order of magnitude faster than the most efficient O(N logN) implementations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhanced discretization of surface integral equations for resonant scattering analysis of sharp-edged plasmonic nanoparticles

  • Sekulic, Ivan
  • Tzarouchis, Dimitrios C.
  • Ylä-Oijala, Pasi
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The surface integral equation (SIE) method, discretized with the method of moments, is a well-established methodology for the scattering analysis of subwavelength plasmonic nanoparticles. SIEs are usually discretized with low-order basis functions that preserve the normal continuity of the surface currents across the edges arising in the meshed boundary, such as Rao-Wilton-Glisson (RWG) functions. However, the plasmonic enhancement modeling on sharp-edged particles is an extremely challenging task, especially due to the singular fields exerted at sharp corners, exposing a slow (or no) convergence in the computation of the scattering and absorption spectra. In this paper, we propose an alternative discretization strategy based on a discontinuous basis function set in conjunction with a volumetric-tetrahedral testing scheme. We demonstrate the potential of the proposed discretization scheme by studying scattering and absorption spectra of three canonical plasmonic polyhedra, i.e., a hexahedral, an octahedral, and a tetrahedral silver inclusion. The results expose an improved accuracy and faster convergence in both far-field and near-field regions when compared to the standard RWG implementation. The proposed discretization scheme can offer faster and more accurate routes towards the exploration and design of the plasmonic resonant spectrum of sharp-edged nanoparticles and nanoantennas., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The Input-output equivalent sources method for fast simulations of distributed nonlinearities in bulk acoustic wave resonators and filters

  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Perea Robles, Rafael
  • Aigner, Robert
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work presents a new method to analyze weak distributed nonlinear effects, with focus on the generation of harmonics (H) and intermodulation products (IMD) in bulk acoustic wave resonators and filters composed of them. The method consists of finding equivalent current sources (Input-Output Equivalent Sources) at the H or IMD frequencies of interest, that are applied to the boundary nodes of any layer that can contribute to the nonlinearities according to its local nonlinear constitutive equations. The new methodology is compared with the harmonic balance analysis, by means of a commercial tool, of a discretized nonlinear Mason model, which is the most used model for nonlinear bulk acoustic wave resonators. While the computation time is drastically reduced, the results are fully identical. For the simulation of a 7th order filter, the Input-Output Equivalent Sources method is around 700 times faster than the harmonic balance simulations., This work was supported in part by the Catalan Gov. through grant 2017 SGR 813, and by the Spanish Gov through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Solving electromagnetic scattering in dielectric bodies by Monte Carlo sampling

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
In this work, we propose Monte Carlo sampling as a technique to avoid communication overhead in the numerical solution of complex electromagnetic scattering problems. The method is based on statistically sampling a formal representation of the solution of the scattering problem, based on a modified Born series. The sampling process can be independently carried out in different processors with no need for communication between them. This lack of communication makes the algorithm suitable for massively parallel computational environments., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB- C21 / AEI / 10.13039/501100011033 and TEC2017- 84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016- 0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigaci ´on, Spain, and Catalan Research Group 2017 SGR 219, and Ag`encia de Gesti ´o d’Ajuts Uni- versitaris i de Recerca with grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improving the accuracy of the adaptive cross approximation with a convergence criterion based on random sampling

  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The accuracy of the Adaptive Cross Approximation (ACA) algorithm, a popular method for the compression of low rank matrix blocks in Method of Moment computations, is sometimes seriously compromised by unpredictable errors in the convergence criterion. This paper proposes an alternative criterion, based on global sampling of the error in the elements of the ACA compressed matrix. The sampling error depends on the size of the sample but also on the population distribution of the error, which makes it difficult to control the error independently of the underlying problem. However, as argued and demonstrated in the paper, the distribution of the error converges to the same unique probability distribution function for all low rank matrices. Complementing the sampling criterion with a simple mechanism to detect this convergence, we arrive at a criterion that controls the error irrespective of the underlying problem. As a practical example the RCS of a moderate size metallic ogive is computed to illustrate the merits of the proposed criterion. The proposed algorithm may also be useful in other methods that approximate low-rank matrices by interpolation of a reduced set of its elements., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R, TEC2017-83343-C4-2-R, PID 2019-107885GBC31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Out of band improved performance into a measured 5G N77 band transversal filter

  • Udaondo Guerrero, Carlos|||0000-0002-4251-0530
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • Perea Robles, Rafael
  • Yusud, Yazid
  • Giménez Bonastre, Alfred Raul
  • Aigner, Robert
Transversal networks for electroacoustic filters had been proposed and manufactured recently. One of the main problems that arose in the first prototype were the spurious modes due to the mirror stack of the Solidly Mounted Resonators (SMR). In this work, different approaches for solving this problem are discussed, relying on Mason's circuit-based simulations of each resonator and of the filter topology. The main drawbacks and advantages of the different approaches are discussed in terms of fabrication and mirror efficiency., This work was supported in part by the Catalan Government under Grant 2017 SGR 813, in part by the Spanish Government under Grant TEC2017-84817-C2-2-R and Grant TEC2017-88343-C4-2-R, and was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant 2020 FI_B-00967., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A parallel Monte Carlo method for solving electromagnetic scattering in clusters of dielectric objects

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
In this work, we develop a novel Monte Carlo method for solving the electromagnetic scattering problem for clusters of photonic particles. The method is based on a formal solution of the scattering problem as a modified Born series whose coefficients are found by a conformal transformation. The terms of the Born series are approximated by sampling random elements of its matrix representation, computed by the Method of Moments. Unlike other techniques like the Fast Multiple Method, this Monte Carlo method does not require communication between processors, which makes it suitable for large parallel executions., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019- 107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB-C21 / AEI / 10.13039/501100011033 and TEC2017-84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM- 2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Role of SiO2 layers in third-order nonlinear effects of temperature compensated BAW resonators

  • García Pastor, David
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Aigner, Robert
This work applies a comprehensive nonlinear characterization process of two Temperature Compensated Bulk Acoustic Wave (TC-BAW) resonators. In both resonators, the SiO 2 layers have a remarkable impact on the generation of third- order intermodulation products (IMD3), confirming the impact of the SiO 2 on the generation of passive intermodulation. A unified model considering the electro-thermo-mechanical constitutive relations of the piezoelectricity is used, that allows to discern on the origin of the IMD3, either it comes from intrinsic nonlinearities of the materials, or from self-heating mechanisms., This work was supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813. With the support of the Universities and Research Secretary of the Generalitat de Catalunya and the European Social Fund through grant 2018FI_B_00448, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Acceleration of Born series by change of variables

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Heldring, Alexander
  • Úbeda Farré, Eduard
In this work, we propose a method to enhance the convergence of the Born series. The Born series is widely used in scattering theory, but its convergence is only guaranteed under certain restrictive conditions which limit the cases where this formulation can be applied. The proposed method, based on modifying the singularities of the resolvent operator by a change of variables, accelerates the convergence of the series or even achieves convergence in otherwise divergent cases. Due to its low computational cost and ease of implementation, the method preserves the advantages of the Born series while it extends its range of application. It can also be applied to a variety of methods relying on the same mathematical principles as the Born series. Numerical examples are provided to show that a significant improvement can be achieved with simple techniques and with a limited knowledge about the operator spectrum., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, MDM2016-0600, TEC2017-83343-C4-2-R, TEC2017-84817-C2-2-R, PID 2019-107885GB-C31 and Catalan Research Group 2017 SGR 219; and by Secretary of Universities and Research of the Ministry of Business and Knowledge of the Generalitat of Catalonia and European Social Fund under scholarship 2019 FI B00788., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Practical issues on the implementation of acoustic transversal filters

  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
This paper evaluates important aspect of acoustic filters based on a transversal configuration in order to foreseen the potential and limitations of this new configuration. These aspects are: effects of the losses of the resonators and external components, such as capacitors and inductors, sensitivity on the deviation of the impedance and resonant frequency of the resonators and effects of having a non-ideal balun. This study has been performed in a sixth order filter with asymmetric position of the transmission zeros., Work supported by TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, 2017 SGR 813, ESA- 400012413/18/NL/CRS., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Synthesis procedure for ladder acoustic wave filters starting in series resonator

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
This work provides a new procedure to synthesize acoustic wave ladder filters starting with series resonators. The novelty of this method relies in a new synthesis methodology to extract a series inductance in filter configurations starting in series resonators. As a matter of fact, this new synthesis provides solutions with a reduced value of the electrostatic capacitance, thereby giving resonators with smaller size., This work have been supported by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4- 2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fast analysis and optimization of sparsely distributed partial modification problems

  • Fang, Xiaoxing
  • Heldring, Alexander
  • Rius Casals, Juan Manuel
  • Cao, Qunsheng
This article addresses the efficient numerical analysis of sparsely distributed small modifications in a large structure, that is, the sparsely distributed partial modification problem (SDPMP). A hierarchical matrix (H-matrix)-based fast direct solver is adopted to solve the SDPMP in a very short time for each new set of modifications. The main idea of this method is to reuse the parts of the compressed inverse matrix operator that do not change and only recompute the modified parts. In contrast with already existing algorithms designed to tackle a single localized modification, this new approach is still very fast for sparsely distributed small modifications, so it becomes a very attractive option to solve optimization problems efficiently, due to the very cheap analysis of the modified structure at each iteration of the optimization procedure. The efficiency of the solution of SDPMP is demonstrated for several cases involving passive and active metasurfaces and a reconfigurable antenna. As a practical example, a programmable metasurface reflector is optimized with particle swarm optimization to obtain a prescribed reflection pattern., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219; in part by the China Scholarship Council under Grant 201906830042; in part by the Startup Foundation for Introducing Talent of the Nanjing University of Information Science and Technology (NUIST) under Grant 2022r079; in part by the Ministerio de Ciencia e Innovacion (MICINN) under Project PID2019- 107885GB-C31/AEI/10.13039/501100011033, Project PID2020-113832RBC21/AEI/10.13039/501100011033, and Project TEC2017-84817-C2-2-R/AEI/ 10.13039/501100011033; and in part by the Unidad de Excelencia Maria de Maeztu, which is financed by the Agencia Estatal de Investigación, Spain, under Grant MDM-2016-0600/AEI/10.13039/501100011033; and in part by the Catalan Agency for Management of University and Research Grants (AGAUR) under Research Group under Grant 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fast simulation method of distributed nonlinearities in surface acoustic wave resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Aigner, Robert
  • Huebner, Sebatian
Understanding the mechanism of nonlinearity in SAW/BAW devices is growing up in importance because these, even being weak, can cause desensitization of the receivers and limiting their performance. Proper nonlinear distributed models have been extensively used, usually running Harmonic Balance (HB) simulations being in some cases very time consuming. The motivation of this work is to apply a new method of analysis for the simulation of harmonics (H) and intermodulation products (IMD) generation in SAW devices. The method is called the Input-Output Equivalent Sources (IOES) and it allows extremely fast and robust simulations of large distributed weak nonlinear circuits., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813. Research wasalso supported by the Secretary of Universities and Research of the Generalitatde Catalunya and the European Social Fund through grant FI_B-00136., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

High temperatures BVD model for AlN-based solidly mounted resonators

  • Lugo Hernández, Eduardo
  • Mirea, Teona
  • Carmona Cejas, Jose Manuel
  • Clement Lorenzo, Marta
  • Olivares Roza, Jimena
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
In this paper we present an updated version of the well-known one dimensional model for Solidly Mounted Resonators (SMRs) based on Aluminum Nitride (AIN) for harsh environments at 2.4 GHz in sensing applications. Our model covers from 22°C up to 422°C and presents this performance. Qa=900,Or=350 and keff=6.17% at 22°C to a Qa=380,Qr=150 and keff=5.48% at 422°C Also we have verified our model using measurements from fabricated SMRs with an acoustic reflector of seven alternating layers of low and high acoustic impedance., This work was supported by the next projects: TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, TEC2017-84817-C2-1-R, 2017 SGR-813 and Conacyt-México., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comprehensive nonlinear characterization and modeling of a BAW duplexer

  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
This paper performs a comprehensive nonlinear modeling of a Bulk Acoustic Wave (BAW) duplexer operating at the band 7 of the LTE wireless communication standard. The modeling starts by an accurate characterization of the resonators forming the filters by performing measurements of the second harmonic (H2). The modeling of individual resonators has then been used to predict second order nonlinear manifestations occurring in a real duplexer. These are H2, second order intermodulation products (IMD2), for the case where a jamming signal is set to low frequencies (IMD2-Low) and when the jamming signal is set to high frequencies (IMD2-High). Predicted results are then validated with real measurements., The authors would like to thank Qorvo Inc. for providing the on-wafer measurements that appear in this article. Work supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

GRECO: 30 years of graphical processing techniques for RCS computation

  • Rius Casals, Juan Manuel
  • Úbeda Farré, Eduard
  • Heldring, Alexander
This contribution to the special session in honor of Prof. Rafael Gómez-Martín will address the 30 year development of graphical processing techniques (GRECO) for fast computation of Radar Cross Section (RCS) of electrically large and complex targets. The development of GRECO started in 1988, in the frame of the “Applied research project for the development and validation of numerical methods for RCS prediction, analysis and optimization”, in which I had the pleasure to know Rafael since our groups where participating together in the project. The development of GRECO never stopped, and recently it has been updated by replacing the graphical processing technique for computation of surface reflection and edge diffraction by a hybrid CPU-graphical processing approach. The resulting code has the same accuracy as conventional RCS computation techniques, but detection of shadowed surfaces and edges is one order of magnitude faster than the most efficient O(N logN) implementations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analytical modeling method of thermal spreading resistance in BAW filters

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Aigner, Robert
As the power requirements in BAW filters steadily increase, thermal behaviour emerges as a key asset to ensure device performance and reliability. Under these conditions, self-heating mechanisms drive to possible situations where the filters no longer meet the electrical specifications. In addition to that, the evaluation of the heat spreading might help to define the resonators and pillars distribution along with the overall performance of current BAW filters. In the past, numerical methods based on FEM have been used to study the temperature distribution under high-power (HP) signals, lacking efficiency in terms of computational time. The motivation of this work is to describe an analytical method that is able to simulate very fast, without the need of costly FEM simulation, the heat spreading in a filter according to the spatial distribution of the resonators., This work was supported in part by the Spanish Gov. through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4- 2-R and 2017 SGR-813. Research was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant FI_B00136, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Accurate, grid-robust and versatile combined-field discretization for the electromagnetic scattering analysis of perfectly conducting targets

  • Úbeda Farré, Eduard
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel
  • Heldring, Alexander
Recent implementations of the Electric-Field Integral Equation (EFIE) for the electromagnetic scattering analysis of perfectly conducting targets rely on the electric current expansion with the monopolar-RWG basis functions, discontinuous across mesh edges, and the field testing over volumetric subdomains attached to the surface boundary triangulation. As compared to the standard RWG-based EFIE-approaches, normally continuous across edges, these schemes exhibit enhanced versatility, allowing the analysis of geometrically non-conformal meshes, and improved accuracy, especially for subwavelength sharp-edged conductors. In this paper, we present a monopolar-RWG discretization by the Method of Moments (MoM) of the Combined-Field Integral Equation (CFIE) resulting from the addition of a volumetrically tested discretization of the EFIE and the Galerkin tested MFIE-implementation. We show for sharp-edged conductors the degree of improved accuracy in the computed RCS and the convergence properties in the iterative search of the solution. More importantly, as we show in the paper, these implementations become in practice advantageous because of their robustness to flaws in the grid generation or their agility in handling complex meshes arising from the interconnection of independently meshed domains. The hybrid RWG/monopolar-RWG discretization of the CFIE defines the RWG discretization over geometrically conformal and smoothly varying mesh regions and inserts the monopolar-RWG expansion strictly at sharp edges, for improved accuracy purposes, or over boundary lines between partitioning mesh domains, for the sake of enhanced versatility. These hybrid schemes offer similar accuracy as their fully monopolar-RWG counterparts but with fewer unknowns and allow naturally non-conformal mesh transitions without inserting additional inter-domain continuity conditions or new artificial currents., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologı́a (CICYT) under projects TEC2016-78028-C3-1- P, TEC2017-84817-C2-2- R, and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Solving electromagnetic scattering in dielectric bodies by Monte Carlo sampling

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Úbeda Farré, Eduard
  • Heldring, Alexander
In this work, we propose Monte Carlo sampling as a technique to avoid communication overhead in the numerical solution of complex electromagnetic scattering problems. The method is based on statistically sampling a formal representation of the solution of the scattering problem, based on a modified Born series. The sampling process can be independently carried out in different processors with no need for communication between them. This lack of communication makes the algorithm suitable for massively parallel computational environments., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB- C21 / AEI / 10.13039/501100011033 and TEC2017- 84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016- 0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigaci ´on, Spain, and Catalan Research Group 2017 SGR 219, and Ag`encia de Gesti ´o d’Ajuts Uni- versitaris i de Recerca with grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced discretization of surface integral equations for resonant scattering analysis of sharp-edged plasmonic nanoparticles

  • Sekulic, Ivan
  • Tzarouchis, Dimitrios C.
  • Ylä-Oijala, Pasi
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The surface integral equation (SIE) method, discretized with the method of moments, is a well-established methodology for the scattering analysis of subwavelength plasmonic nanoparticles. SIEs are usually discretized with low-order basis functions that preserve the normal continuity of the surface currents across the edges arising in the meshed boundary, such as Rao-Wilton-Glisson (RWG) functions. However, the plasmonic enhancement modeling on sharp-edged particles is an extremely challenging task, especially due to the singular fields exerted at sharp corners, exposing a slow (or no) convergence in the computation of the scattering and absorption spectra. In this paper, we propose an alternative discretization strategy based on a discontinuous basis function set in conjunction with a volumetric-tetrahedral testing scheme. We demonstrate the potential of the proposed discretization scheme by studying scattering and absorption spectra of three canonical plasmonic polyhedra, i.e., a hexahedral, an octahedral, and a tetrahedral silver inclusion. The results expose an improved accuracy and faster convergence in both far-field and near-field regions when compared to the standard RWG implementation. The proposed discretization scheme can offer faster and more accurate routes towards the exploration and design of the plasmonic resonant spectrum of sharp-edged nanoparticles and nanoantennas., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Out of band improved performance into a measured 5G N77 band transversal filter

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Perea Robles, Rafael
  • Yusud, Yazid
  • Giménez Bonastre, Alfred Raul
  • Aigner, Robert
Transversal networks for electroacoustic filters had been proposed and manufactured recently. One of the main problems that arose in the first prototype were the spurious modes due to the mirror stack of the Solidly Mounted Resonators (SMR). In this work, different approaches for solving this problem are discussed, relying on Mason's circuit-based simulations of each resonator and of the filter topology. The main drawbacks and advantages of the different approaches are discussed in terms of fabrication and mirror efficiency., This work was supported in part by the Catalan Government under Grant 2017 SGR 813, in part by the Spanish Government under Grant TEC2017-84817-C2-2-R and Grant TEC2017-88343-C4-2-R, and was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant 2020 FI_B-00967., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear performance on acoustic transversal filters

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
The recently proposed transversal topology for creating acoustic filters allows to achieve arbitrary filter responses, in terms of position of transmission zeros and bandwidth, among others. This new topology might indeed help to give response to the demanding filter specification of the recent and future wireless communication systems, some not yet achievable with the conventional ladder configuration used in acoustic technology. Full success of the transversal configuration to this end also requires meeting decent nonlinear responses. This work makes use of a comprehensive nonlinear equivalent circuit model to analyze and evaluate the nonlinear response, in particular the second harmonic (H2), of acoustic transversal filters. This work evaluates the effects of the filter bandwidth, electro-acoustic coupling and goes one step further to propose variation of the topology to provide filter responses with reduced nonlinear effects., Work supported by the Spanish Government through grants TEC2017- 84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Wideband transversal acoustic wave filters. Application to connected cars

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
  • Aigner, Robert
This paper presents the synthesis and circuit transformations of acoustic wave filters based on a transversal arrangement of the individual resonators. This configuration allows for the synthesis of any filter response without detrimental of the limited value of the electro-acoustic coupling coefficient. The synthesis can be performed in the low-pass domain to be latter transformed into the band-pass domain. This latter step results in significant differences between the low-pass and the band-pass responses in wideband stringent filters. This work, after an initial synthesis in the low-pass domain, directly applies the pass-band circuit transformation achieving a more accurate synthesized network even for wideband filters., This work has been supported by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving the accuracy of the adaptive cross approximation with a convergence criterion based on random sampling

  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The accuracy of the Adaptive Cross Approximation (ACA) algorithm, a popular method for the compression of low rank matrix blocks in Method of Moment computations, is sometimes seriously compromised by unpredictable errors in the convergence criterion. This paper proposes an alternative criterion, based on global sampling of the error in the elements of the ACA compressed matrix. The sampling error depends on the size of the sample but also on the population distribution of the error, which makes it difficult to control the error independently of the underlying problem. However, as argued and demonstrated in the paper, the distribution of the error converges to the same unique probability distribution function for all low rank matrices. Complementing the sampling criterion with a simple mechanism to detect this convergence, we arrive at a criterion that controls the error irrespective of the underlying problem. As a practical example the RCS of a moderate size metallic ogive is computed to illustrate the merits of the proposed criterion. The proposed algorithm may also be useful in other methods that approximate low-rank matrices by interpolation of a reduced set of its elements., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R, TEC2017-83343-C4-2-R, PID 2019-107885GBC31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Input-output equivalent sources method for fast simulations of distributed nonlinearities in bulk acoustic wave resonators and filters

  • Collado Gómez, Juan Carlos
  • González Rodríguez, Marta
  • Mateu Mateu, Jordi
  • Perea Robles, Rafael
  • Aigner, Robert
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work presents a new method to analyze weak distributed nonlinear effects, with focus on the generation of harmonics (H) and intermodulation products (IMD) in bulk acoustic wave resonators and filters composed of them. The method consists of finding equivalent current sources (Input-Output Equivalent Sources) at the H or IMD frequencies of interest, that are applied to the boundary nodes of any layer that can contribute to the nonlinearities according to its local nonlinear constitutive equations. The new methodology is compared with the harmonic balance analysis, by means of a commercial tool, of a discretized nonlinear Mason model, which is the most used model for nonlinear bulk acoustic wave resonators. While the computation time is drastically reduced, the results are fully identical. For the simulation of a 7th order filter, the Input-Output Equivalent Sources method is around 700 times faster than the harmonic balance simulations., This work was supported in part by the Catalan Gov. through grant 2017 SGR 813, and by the Spanish Gov through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

N-Plexer and N-Band acoustic filters based on transversal configuration

  • Perea Robles, Rafael
  • Mateu Mateu, Jordi
  • Collado Gómez, Juan Carlos
This work shows the feasibility of using filters with transversal configuration to create N-Plexers and N-Band responses, by directly connecting several BAW filters in a transversal manner. The new multi-filtering solutions might indeed help on the existing and forthcoming challenges for LTE or 5G, such as the efficient management of the limited spectrum allocation or the non-contiguous spectrum, with the aim of increasing the network capacity and higher data rates. The filter arrangement proposed shows as well flexibility on dynamic scenarios like the ones occurring in a Carrier Aggregation (CA) access [1]., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, the Secretary of Universities and Research of the Generalitat de Catalunya through 2017 SGR 813 and ESA Contract No. 400012413/18/NL/CRS., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient and accurate electromagnetic scattering analysis of perfectly conducting thick plates

  • Úbeda Farré, Eduard
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel
The scattering analysis with the Electric-Field Integral Equation by the Method of Moments of perfectly conducting plates is normally carried out through the thin-plate approximation, which models the closed surface as an open surface and discards the influence of the plate rim. The resulting accuracy is accepted in many practical applications as long as the thickness of the plate is small enough. However, in the scattering analysis of plates with grazing incidences, the thin-plate approximation gives rise to severe inaccuracies. In this paper, we present a new numerical approach, which we name thick-plate formulation, for the accurate computation of the current and the RCS for a plate with nonzero thickness. Our scheme provides similar accuracy as the solution obtained with the full modelling of the plate and with less computational time., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologı́a (CICYT) under projects TEC2016-78028-C3-1-P , TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Grid-robust discretization of integral equations in the electromagnetic scattering analysis of homogeneous targets with geometric singularities

  • Úbeda Farré, Eduard
  • Sekulic, Ivan
  • Rius Casals, Juan Manuel
The conventional method-of-moment schemes of discretization for the scattering analysis of homogeneous targets, perfectly conducting or dielectric, rely on edge-based basis functions. This restricts the modelling of the targets to conformal meshes, with all adjacent facets sharing one single edge. Prior to the electromagnetic analysis, edge-based schemes require the execution of edge search algorithms in order to establish the set of interior edges of the mesh. On the other hand, flaws in the mesh generation may give rise to an incomplete identification of the interior edges and a wrong modelling of the currents. Recently introduced facet-based schemes of discretization of surface integral equations, with volumetric testing, have exhibited improved accuracy in the analysis of targets with geometric singularities. Since facet-based schemes ignore by definition edges, they are better suited than the edge-based schemes for the robust analysis of slightly defective meshes, e.g. with unconnected vertices or misaligned edges., This work was supported by FEDER and the Spanish Comisión Interministerial de Ciencia y Tecnologıá (CICYT) under projects TEC2016-78028-C3-1-P, TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of border ring modes on SMR-BAW resonators

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Aigner, Robert
An equivalent circuit model is proposed in order to model the Border Ring (BR) spurious modes on Type I Solidly Mounted Resonators (SMR) BAW resonators and the cancellation of the in-band lateral modes that the BR frame produces. The model has been validated through FEM simulations and with measurements of resonators. It predicts the electrical response of the BR effects for different resonators and BR sizes., This work was supported in part by the Spanish Government through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR-813., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tone injection-based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • González Arbesú, José María
  • Mateu Mateu, Jordi
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This is the pre-peer reviewed version of the following article: González‐Rodríguez, M., Collado, C., González‐Arbesú, J. M., Mateu, J., Montoro, G., & Gilabert, P. L. (2021). Tone injection‐based cancellation technique for nonlinear distortion reduction of modulated signals in BAW resonators. Microwave and Optical Technology Letters, 63(3), 781-786, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/mop.32670. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., A technique for the reduction of third-order intermodulation distortion (IMD3) occurring in bulk acoustic wave (BAW) filters and multiplexers is presented. The method consists of using the intrinsic second-order intermodulation distortion generated by BAW filters and multiplexers themselves by injecting an externally controlled amplitude and phase modulated signal at low frequency to compensate for the IMD3. The proposed technique has been experimentally verified by performing IMD3 measurements in a single BAW resonator subject to several modulated signals under a nonlinear scenario., Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund, Grant/Award Number: FI_B-00136; Spanish Government, Grant/Award Numbers: 2017 SGR-813,TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Geometric algebra formulation of the Calderon Projector

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Úbeda Farré, Eduard
  • Heldring, Alexander
Geometric Algebra provides a mathematical frame-work that allows to express many equations of physics in a more compact way [1]. It unifies the electric and the magnetic field in a single mathematical object: a multivector. Then, the four Maxwell’s equations can be written as a single one. Here we study how the integral formulation of the electromagnetic field in Geometric Algebra naturally embeds the Calderon Projector when the field is evaluated in a surface., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects TEC2016-78028-C3-1-P and TEC2017-84817-C2-2-R and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR219., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Updated BVD modeling of AlN-based solidly mounted resonators working at cryogenic and high temperatures: from -160°C up to 130°C

  • Lugo Hernández, Eduardo
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • Carmona Cejas, José Manuel
  • Mirea, Teona
  • Olivares Roza, Jimena
In this work we theoretically and experimentally assess the behavior of AlN-based Solidly Mounted Resonators (SMR) at cryogenic and high temperatures. This study can be useful for precise behavior prediction of SMR sensors working as gas detectors in the food preservation industry, or the industrial and automotive ones. We have subjected SMRs to temperatures from -160°C up to 130°C in high vacuum conditions (6×10 -7 mBar) and compared their experimental performance to a modelled one. We employed an updated mBVD model that includes low temperatures effects, and we show good accuracy between data. Our SMRs have fairly preserved their quality factors and electromechanical coupling factors at both cryogenic and high temperatures: Qa= 482, Qr = 288 and k eff = 6.30% at -160°C to a Qa = 477, Qr = 265 and k eff = 6.39% at 130°C., This work was supported by the next projects: TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R, TEC2017-84817-C2-1-R, 2017 SGR-813 and Conacyt-México., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A parallel Monte Carlo method for solving electromagnetic scattering in clusters of dielectric objects

  • López Menchón, Héctor
  • Úbeda Farré, Eduard
  • Heldring, Alexander
  • Rius Casals, Juan Manuel
In this work, we develop a novel Monte Carlo method for solving the electromagnetic scattering problem for clusters of photonic particles. The method is based on a formal solution of the scattering problem as a modified Born series whose coefficients are found by a conformal transformation. The terms of the Born series are approximated by sampling random elements of its matrix representation, computed by the Method of Moments. Unlike other techniques like the Fast Multiple Method, this Monte Carlo method does not require communication between processors, which makes it suitable for large parallel executions., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019- 107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB-C21 / AEI / 10.13039/501100011033 and TEC2017-84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM- 2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (author's final draft)