Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Stability analysis of single-well cylindrical–spherical salt caverns for green hydrogen storage in bedded formations

  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • Juanes, Rubén
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: This study evaluates the viability of single-well spherical–cylinder salt caverns (SWCSs) for green hydrogen storage in bedded salt formations. Using numerical simulations, we demonstrate their ability to store significant volumes of energy, up to hundreds of GWh. SWCSs, designed with a single vertical well to avoid the horizontal drilling and multi-step dilution processes, provide a structurally viable and cost-effective alternative to twowell horizontal caverns (TWHs). These caverns take advantage of the horizontal dimensions of the bedded formations within their vertical constraints. Given the expanding role of hydrogen in global energy systems, the adoption of SWCSs can enhance the storage capacity and operational flexibility of systems associated with the hydrogen economy. Future studies should validate these findings experimentally to promote the implementation of SWCSs., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, ‘‘Margarita Salas’’ Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented toward the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021- 129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Topology Optimization of Structures with Stress, Buckling and Dynamic Behaviour Constraints

  • Rey Furelos, Martín
  • Couceiro, Iván
  • París, José
  • Ramírez, Luis
  • Navarrina, Fermín
[Abstract] We can define topological optimization of structures as the branch of computational mechanics that seeks to obtain optimal material layouts in a given domain under specific boundary conditions. This discipline, pioneered by Bendsøe and Kikuchi in the late 1980s, is becoming increasingly relevant due to its direct application in various sections of applied physics such as civil, mechanical and aeronautical engineering. In recent years, the advancements in computational capacity have enabled a significant leap in the topological optimization of structures. This work aims, first, to systematize and compile the current knowledge surrounding the behaviour of structural models with intrinsic relative densities used in the SIMP method, in order to design solutions to the various physical and numerical challenges arising from the use of Galerkin interpolation methods (FEM, IGA, etc.) for solving elasticity equations with relative density. Specifically, we will attempt to address the problems arising from topological optimization processes in which dynamic structural analysis or second-order theory plays a fundamental role. Ultimately, the main objective of this work is to design topological optimization formulations for structures of isotropic materials using the SIMP method integrating advanced constraints and combining them in a way that accounts for an increasing number of physical phenomena, thereby reducing the structure’s weight to optimal level. The reduction in structural weight introduces the potential for instabilities, dynamic effects and nonlinearities, which will be addressed throughout the optimization process using well-known structural analysis techniques such as the calculation of natural vibration frequencies, linear buckling or full geometric nonlinearity., This research has been partially funded by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREENHUGS (Grant #Ted2021-129991b-C31 and Grant #Ted2021-129991b-C32) and NEPTUNE (Grant #Ted2021-129805b-I00), by The Ministry of Science and Innovation: ATHENEA (Grant #Pid2021-125447ob-100) and TOPACIUS (Grant #Pid2023-146793ob-I00), by Department of Education and University Planning of The Xunta De Galicia (Grant #Ed431c 2022/06), and by The Group of Numerical Methods in Engineering of The Universidade Da Coruña., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Real Options Approach for Valuing Storage Contracts of Hydrogen–Methane Gas Blends

  • Cueto-Felgueroso Landeira, Luis
  • Soage Quintáns, Manuel Andrés
  • Alcaraz, Vicente
  • Lara, Antonio
[Abstract]: Decarbonization and growth of variable renewable generation have increased interest in hydrogen as a low-carbon energy carrier. Underground hydrogen storage in geological formations is one of the few scalable options for large-capacity energy storage, and retrofitting existing natural gas infrastructure to store methane–hydrogen blends offers a practical transition pathway. Yet valuing such storage contracts is difficult because hydrogen markets remain immature. This paper develops a real-options framework for methane–hydrogen storage contracts with a prescribed hydrogen energy fraction. Extending the Hamilton–Jacobi–Bellman approach used for natural gas storage, the model incorporates stochastic hydrogen prices and blend-specific operational constraints, including reduced effective energy capacity. Contract values and optimal operating policies are computed by solving a multi-factor HJB equation with a semi-implicit finite-difference scheme. The framework is verified against natural gas benchmarks and assessed by Monte Carlo cash-flow evaluation. Results show how value and policies depend on blend ratio, volatility, capacity, and contract duration., Work funded by project TED2021-129991B-C32 financed by Spanish MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR .
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Why poro-viscoplastic modeling matters for the long-term safety assessment of hydrogen storage in salt caverns

  • Fernández-Amado, Blanca
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Mosquera Feijoo, Juan Carlos
  • Cueto-Felgueroso Landeira, Luis
This publication is part of the grant TED2021-129991B-C31 funded by MICIU/AEI/10.13039/501100011033, Spain and by the “European Union NextGeneration EU/PRTR”. This research is also part of the grant PID2023-146793OB-I00 funded by MICIU/AEI/10.13039/501100011033, Spain and by FEDER, EU. Additional funding was provided by the “Margarita Salas” Grants Modality for the Training of Young Doctors, Spain, RD 289/2021 of April 20, by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) of the Universidade da Coruña, Spain . Funding for open access charge: Universidade da Coruña/CISUG, Spain, [Abstract:] Long-term stability of salt caverns operated for underground hydrogen storage remains a critical challenge, largely driven by time-dependent creep and stress redistribution under cyclic pressurization. We present novel contributions to long-term cavern assessment by introducing a poro-viscoplastic (PVP) framework that couples creep deformation with pore-pressure diffusion to reassess cavern integrity over multi-decade operation. This work opens new ground by demonstrating that even minimal porosity and permeability — commonly overlooked in traditional viscoplastic (VP) analyses — can significantly modify effective stresses under cyclic operation. An axisymmetric finite-element model at representative depths compares VP and PVP predictions for long and short injection–withdrawal cycles. PVP simulations produce different safety factors in instability-prone zones, driven by transient pore-pressure dissipation and the evolution of effective confinement. Results expose mechanisms absent from VP analyses and suggest VP models overestimate safety margins based on local safety-factor thresholds. The proposed approach provides a more physically grounded basis for defining safe operating envelopes., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of a gunite lining on the stability of salt caverns in bedded formations for hydrogen storage

  • Méndez-Vázquez, Santiago
  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
  • Juanes, Rubén
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] In this paper, a novel methodology to improve the structural behaviour and durability of bedded salt caverns for hydrogen storage is proposed. The suggested technology consists in applying a gunite lining over the whole cavern surface by means of a pneumatic air blowing. This continuous flow projected at high speed onto the cavern surface produces a self-compacted gunite facing. The effect of adding a gunite lining on the structural performance of a bedded salt cavern is analysed. The nonlinear finite element method is then applied to solve the inherent nonlinear solid mechanics problem. It is shown that reinforcing salt caverns with a gunite lining improves the cavern behaviour, specially in the case of caverns located within a horizontal salt stratum confined between other strata. When dealing with these salt formations, the stratum geometry limits the cavern height. In general, wider caverns that exhibit larger displacements are required to achieve a huge storage capacity. Moreover, these caverns can be located at a considerable depth, where the temperature has an important role on the creep deformation process. Therefore, the proposition of stabilization techniques is required to ensure both their structural integrity and the ground subsidence. This technology allows the safe exploitation of salt caverns located at bedded-type stratified horizontal salt formations., This research has been partially funded by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS, Spain (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE, Spain (grant #TED2021-129805B-I00), by the Ministry of Science, Innovation and Universities of the Spanish Government, Spain (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Spain., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Isogeometric topology optimization of structures using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the “Xunta de Galicia (Secretaría Xeral de Universidades)” and the European Union (European Social Fund—ESF) through grant ED481A-2016/387, by the Spanish Government “(Ministerio de Universidades)” through “Margarita Salas grants for the training of new PhD-2022” [RSU.UDC.MS25], by Feder funds of the European Union to the Spanish Government (“Ministerio de Economía y Competitividad”) through grants DPI2015-68341-R and RTI2018-093366-B-I00, by the Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” of the “Plan de recuperación, transformación y resiliencia” [TED2021-129991B-C31] and [TED2021-129805B-100] with FEDER and EU Next-Generation funds, by the “Xunta de Galicia” (“Consellería de Educación, Universidade e Formación Profesional”) through grants GRC2014/039 and GRC2018/41, by the “Xunta de Galicia” “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], and by research fellowships of the University of A Coruña and the “Fundación de la Ingeniería Civil de Galicia”., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Viscoplastic analysis of salt caverns under time-asymmetric pressure cycling: definition and validation of a dimensionless operational rule with real case data

  • Figueiras Velo, Francisco
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: Operational asymmetry is a characteristic feature of underground gas storage systems—particularly in salt caverns—where injection phases are typically longer and steadier than withdrawal phases, which are shorter and more abrupt in response to fluctuating energy demand. Although large-scale hydrogen storage in salt caverns remains under development, similar operational patterns are expected once such facilities reach commercial maturity. Understanding how this temporal imbalance influences the mechanical behavior of the cavern is therefore important for assessing long-term performance and supporting the development of robust operational strategies for future hydrogen storage systems. This study introduces a dimensionless parameter, 𝜒 , to quantify the temporal asymmetry of cyclic operation. 𝜒 accounts not only for the residence times at high and low pressure but also for the different durations required to reach and leave these states. It is defined as the ratio between the effective durations of the high-pressure and low-pressure stages, including both the holding and ramp phases. The numerator represents the total effective time under high-pressure conditions, which includes half of the filling ramp (0.5𝜏fill ), the full high-pressure holding phase (𝜏WGP ), and half of the withdrawal ramp (0.5𝜏withd ). The denominator represents the complementary effective time under low-pressure conditions, consisting of half of the withdrawal ramp (0.5𝜏withd ), the full low-pressure holding phase (𝜏CGP ), and half of the filling ramp (0.5𝜏fill ). This formulation expresses the relative exposure of the rock mass to stabilizing (high-stress) versus creep-promoting (low-stress) conditions. A viscoplastic numerical model is developed to reproduce the time-dependent deformation of salt under cyclic pressure loading. Two measurable indicators are analyzed: the vertical displacement at the cavern roof and the volumetric shrinkage associated with viscoplastic mechanical closure. Results show that temporal asymmetry exerts a dominant control on the long-term mechanical response. When 𝜒 > 1 — indicating longer effective residence under high pressure — the cavern evolves toward a steady-state equilibrium; when 𝜒 < 1, viscoplastic deformation accelerates, promoting mechanical cavern closure. Comparison with operational data from three underground natural gas storage facilities in the United States is consistent with the 𝜒 ranges associated with the stability trends identified numerically. The proposed parameter 𝜒 thus provides a physically grounded and practical first-order indicator for interpreting long-term mechanical behavior in future hydrogen storage caverns, within the scope of a viscoplastic mechanical framework that does not explicitly account for damage, fracture, or permeability evolution., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was supported by the Ministry of Universities of Spain through the Margarita Salas Program (RD 289/2021), and by strategic projects oriented toward the ecological and digital transitions of the Ministry of Science and Innovation: GREEN-HUGS (grants #TED2021-129991B-C31 and #TED2021-129991B-C32) and NEPTUNE (#TED2021-129805B-I00). Additional support was provided by the project TOPACIUS (#PID2023-146793OB-100), the Department of Education and University Planning of the Xunta de Galicia (#ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) at the Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: CRUE-CSIC, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multipatch IGA for stress-constrained minimum weight structural topology optimization

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
This is an Accepted Manuscript of an article published by Taylor & Francis in Engineering Optimization published online: 24 Jan 2025 , available at: https://doi.org/10.1080/0305215X.2024.2436994., [Abstract]: In this article, an isogeometric analysis (IGA) formulation with various patches (multipatch approach) is proposed to solve the structural topology optimization (STO) problem. The multipatch formulation enables the solution of STO problems with geometries not equivalent to rectangles by using IGA. For this purpose, a minimum weight with stress constraints (MWSC) problem is stated. A quadratic B-splines basis defined for each patch is used to model the material distribution. The structural analysis is computed with IGA. The introduction of all of the stress constraints in the formulation of the problem is made with an overweight constraint (OC). Finally, the multipatch approach is validated with the solution of some benchmark problems., This work was partially supported by the Xunta de Galicia (Secretaría Xeral de Universidades) and the European Union (European Social Fund) through ‘Grants for Supporting the Predoctoral Stage in Universities of the Galician University System, in Research Public Organisms of Galicia and in Other Entities of the R&D system of the Galician Government–2016’ (ED481A-2016/387); by the Spanish Government (Ministerio de Universidades) through ‘Margarita Salas Grants for the Training of New PhD–2022’ ([)RSU.UDC.MS25); by the Spanish Government (Ministerio de Ciencia e Innovación) through ‘Knowledge Generation Projects’ (PID2021-125447OB-I00) and through ‘Strategic Projects Oriented to the Ecological and Digital Transition’ of the Plan de recuperación, transformación y resiliencia (TED2021-129991B-C31 and TED2021-129805B-100) with FEDER and EU Next Generation funds by the Xunta de Galicia (Consellería de Cultura, Educación, Formación Profesional y Universidades) through ‘Grants for the Consolidation and Structuring of Competitive Research Units of the Galician University System: Competitive Reference Group’ (ED431C 2022/06); and by research fellowships of the University of A Coruña and the Fundación de la Ingeniería Civil de Galicia.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Optimization of Financial Indicators in Shale-Gas Wells Combining Numerical Decline Curve Analysis and Economic Data Analysis

  • Soage Quintáns, Manuel Andrés
  • Juanes, Rubén
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
Este artigo pertence ao número especial: Integrated Approaches for Unconventional Oil and Gas Extraction and Exploration, [Abstract:] We present a methodology to determine optimal financial parameters in shale-gas production, combining numerical simulation of decline curves and stochastic modeling of the gas price. The mathematical model of gas production considers free gas in the pore and the gas adsorbed in kerogen. The dependence of gas production on petrophysical parameters and stimulated permeability is quantified by solving the model equations in a 3D geometry representing a typical fractured shale well. We use Monte Carlo simulation to characterize the statistical properties of various common financial indicators of the investment in shale-gas. The analysis combines many realizations of the physical model, which explores the variability of porosity, induced permeability, and fracture geometry, with thousands of realizations of gas price trajectories. The evolution of gas prices is modeled using the bootstrapping statistical resampling technique to obtain a probability density function of the initial price, the drift, and the volatility of a geometric Brownian motion for the time evolution of gas price. We analyze the Net Present Value (NPV), Internal Rate of Return (IRR), and Discounted Payback Period (DPP) indicators. By computing the probability density function of each indicator, we characterize the statistical percentile of each value of the indicator. Alternatively, we can infer the value of the indicator for a given statistical percentile. By mapping these parametric combinations for different indicators, we can determine the parameters that maximize or minimize each of them. We show that, to achieve a profitable investment in shale-gas with high certainty, it is necessary to place the wells in extremely good locations in terms of geological parameters (porosity) and to have exceptional fracturing technology (geometry) and fracture permeability. These high demands in terms of petrophysical properties and hydrofracture engineering may explain the industry observation of “sweet spots”, that is, specific areas within shale-gas plays that tend to yield more profitable wells and where many operators concentrate their production. We shed light on the rational origin of this phenomenon: while shale formations are abundant, areas prone to having a multi-parameter combination that renders the well profitable are less common., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Temperature influence on the stability and the viability of salt caverns due to creep phenomena

  • Fernández-Amado, Blanca
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Juanes, Rubén
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: This study investigates the viability of using salt caverns as large-scale storage solutions for green hydrogen, considering the effects of the temperature. To accomplish this, a structural model of a prototype salt dome cavern was evaluated using finite element methods, taking into account variations in temperature and depth. As the temperature of the rock mass rises, the strength of the salt diminishes, which can lead to deformation and collapse of the cavern. Additionally, analyzing the deformation of the cavern is important, as it leads to a reduction in volume and serves as an indicator of the cavern’s serviceability. The methodology developed in this study enables the classification of land areas as suitable or unsuitable for green hydrogen storage in salt caverns based on a safety zone defined by the temperature-depth relationship. In addition, the study compares two cavern geometries—one nearly vertical and the other nearly horizontal—while keeping the same initial volume. This comparison emphasizes the crucial role of geometry in the stability analysis, particularly in relation to the thermal effects on the rock salt. The proposed safety zone solution was validated through real-world examples of operational salt caverns in the USA, confirming its applicability and accuracy., This publication is part of the grant TED2021-129991B-C31 funded by MICIU/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. This research is also part of the grant PID2023-146793OB-I00 funded by MICIU/AEI/10.13039/5011000 11033 and by FEDER, EU. Additional funding was provided by the ‘‘Margarita Salas’’ Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20, by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) of the Universidade da Coruña, Spain. Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

IGA-based topology optimization in the design of stress-constrained compliant mechanisms

  • Villalba Rama, Diego
  • Gonçalves, M.
  • Dias-de-Oliveira, J.
  • Andrade-Campos, A.
  • Valente, R.
[Abstract:] Topology design of compliant mechanisms has gained wide popularity among the scientific community, and their use in the mechanical engineering field is being of upmost importance. In this paper, an isogeometric analysis (IGA) formulation is used to solve the topology optimization problem of compliant mechanisms. Stress constraints are introduced in the problem to guarantee the attainment of realistic solutions. For this purpose, an overweight constraint is considered for the design process, replacing the use of local stress constraints. The material distribution in the domain is modeled with quadratic B-splines and with a uniform relative density within each element of the mesh. These strategies to define the material layout are used to compare the IGA-based formulation with the finite element (FEM) formulation. The IGA formulation provides several advantages with respect to the classical FEM-based approaches that are shown and analyzed with an input-parameters sensitivity analysis. The sensitivity analysis and the assessment of the importance of introducing of stress constraints in the problem are developed by solving two benchmark problems. Regarding the sensitivity analysis of input parameters, the results show that the ratio between the material and the springs stiffnesses is the parameter with the largest influence on the solutions of the problem. Moreover, the advantages of the IGA formulations over FEM formulations are related with the computational time, the smoothness of the structural borders, and the non-appearance of the checkerboard patterns. With respect to the stress constraints, the results show that they have to be considered in order to avoid instability and structural integrity problems., Universidades)” through “Margarita Salas grants for the training of new PhD—2022” [RSU.UDC.MS25], by Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” [TED2021-129991B-C31], by the “Xunta de Galicia “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], by Portuguese Government “(Ministério da Educação e Ciência - Fundação para a Ciência e a Tecnologia (FCT) )” through projects [UIDB/00481/2020] and [UIDP/00481/ 2020] and by Portuguese Government “(Centro Portugal Regional Operational Program (Centro2020))” under the PORTUGAL 2020 Partnership Agreement, with the European Regional Development Fund through project [CENTRO-01-0145-FEDER-022083]., Xunta de Galicia; ED431C 2022/06, Portugal. Fundação para a Ciência e a Tecnologia; UIDB/00481/2020, Portugal. Fundação para a Ciência e a Tecnologia; UIDP/00481/2020, Portugal. Centro de Tecnologia Mecânica e Automação; CENTRO-01-0145-FEDER-022083