Pasar al contenido principal

NUEVOS METODOS SIN MALLA PARA LA SIMULACION NUMERICA DE FLUJOS TURBULENTOS Y PROBLEMAS DE MULTIFISICA. APLICACION AL DESARROLLO DE SISTEMAS DE GENERACION DE ENERGIA RENOVABLE

RTI2018-093366-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Improved δ-SPH Scheme With Automatic and Adaptive Numerical Dissipation

  • Krimi, Abdelkader
  • Ramírez, Luis
  • Khelladi, Sofiane
  • Navarrina, Fermín
  • Deligant, Michaël
  • Nogueira, Xesús
[Abstract] In this work we present a δ-Smoothed Particle Hydrodynamics (SPH) scheme for weakly compressible flows with automatic adaptive numerical dissipation. The resulting scheme is a meshless self-adaptive method, in which the introduced artificial dissipation is designed to increase the dissipation in zones where the flow is under-resolved by the numerical scheme, and to decrease it where dissipation is not required. The accuracy and robustness of the proposed methodology is tested by solving several numerical examples. Using the proposed scheme, we are able to recover the theoretical decay of kinetic energy, even where the flow is under-resolved in very coarse particle discretizations. Moreover, compared with the original δ-SPH scheme, the proposed method reduces the number of problem-dependent parameters., This research was funded by the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government, grant number #RTI2018-093366-B-I00, by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant number #ED431C 2018/41). Xesús Nogueira has also been funded by the Xunta de Galicia through the program Axudas para a mellora, creación, recoñecemento e estruturación de agrupacións estratéxicas do Sistema Universitario de Galicia (grant number # ED431E 2018/11), Xunta de Galicia; ED431C 2018/41, Xunta de Galicia; ED431E 2018/11
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Topology optimization of structures considering minimum weight and stress constraints by using the Overweight Approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Colominas, Ignasi
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] In this paper, a new method for structural topology optimization considering minimum weight and local stress constraints is proposed. For this purpose, the Overweight Approach, an improvement of the so-called Damage Approach, is used. In this method, a virtual relative density is defined as a function of the violation of the local stress constraints. The virtual relative density is increased as stresses exceed the maximum allowable value. The optimization algorithm will provide a design with a minimal variation of the relative density. The structural analysis is performed by means of the Finite Element Method (FEM) and the distribution of material is modelled in terms of a uniform relative density within each element. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP). Finally, the proposed methodology is tested by means of some benchmark problems, and the results show that the Overweight Approach is a feasible alternative for the Damage Approach and the stress constraint aggregation techniques., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, This work has been partially supported by the “Xunta de Galicia, Spain (Secretaría Xeral de Universidades)” and the European Union (European Social Fund - ESF) through “Grants for supporting the predoctoral stage in universities of the Galician University System, in research public organisms of Galicia and in other entities of the “R & D system of the Galician Government - 2016” ED481A-2016/387, by Feder funds of the European Union, by the “Ministerio de Economía y Competitividad, Spain” of the Spanish Government through grants DPI2015-68431-R and RTI2018-093366-B-I00, by the “Consellería de Educación, Universidade e Formación Profesional, Spain” of the “Xunta de Galicia” through “grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” GRC2014/039 and GRC2018/41, and by research fellowships of the University of A Coruña, Spain and the “Fundación de la Ingeniería Civil de Galicia, Spain ”.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Well-Balanced SPH-ALE Scheme for Shallow Water Applications

  • Prieto Arranz, Alberto
  • Ramírez, Luis
  • Couceiro, Iván
  • Colominas, Ignasi
  • Nogueira, Xesús
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work, a new discretization of the source term of the shallow water equations with non-flat bottom geometry is proposed to obtain a well-balanced scheme. A Smoothed Particle Hydrodynamics Arbitrary Lagrangian-Eulerian formulation based on Riemann solvers is presented to solve the SWE. Moving-Least Squares approximations are used to compute high-order reconstructions of the numerical fluxes and, stability is achieved using the a posteriori MOOD paradigm. Several benchmark 1D and 2D numerical problems are considered to test and validate the properties and behavior of the presented schemes., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by FEDER funds of the European Union, Grant #RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant# ED431C 2018/41). Luis Ramírez also acknowledges the funding provided by the Xunta de Galicia through the program Axudas para a mellora, creación, recon~ecemento e estruturación de agrupacións estratéxicas do Sistema universitario de Galicia (reference # ED431E 2018/11), Xunta de Galicia; ED431C 2018/41, Xunta de Galicia; ED431E 2018/11
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Numerical Analysis and Safety Design of Grounding Systems in Underground Compact Substations

  • Guizán Roca, Raquel
  • Colominas, Ignasi
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] This paper presents a mathematical and numerical formulation to design and analyze grounding systems in underground electrical substations. The developed approach is based on the well known Maxwell’s Equations. The proposed problem is solved by means of the Boundary Element Method (BEM). The utilization of BEM allows to introduce the geometry and electrical characteristics of the enclosure in a uniform soil. Therefore, a more realistic approximation of the soil structure is achieved. This formulation allows to obtain the main parameters of these protection systems (the grid resistance, the Ground Potential Rise, and the step and mesh voltage). It also allows to compute the surface and step voltage distributions. In addition, as a secondary result, the voltage and current density distributions over the enclosure are obtained. Finally, two grounding system analyses of real underground electrical substations are presented to demonstrate the industrial application and the modelization capabilities of the proposed formulation., This work has been partially supported by the “Consellería de Cultura, Educación e Ordenación Universitaria” of the “Xunta de Galicia” (grant GRC2014/039) and (grant ED431C2018/41), by the “Ministerio de Economía y Competitividad” (grant DPI2015-68431R) and "Ministerio de Ciencia, Innovación y Universidades" (grant RTI2018-093366-B-I00). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; GRC2014/039, Xunta de Galicia; ED431C2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

An Arbitrary Lagrangian-Eulerian SPH-MLS Method for the Computation of Compressible Viscous Flows

  • Ramírez, Luis
  • Eirís, Antonio
  • Couceiro, Iván
  • París, José
  • Nogueira, Xesús
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work we present a high-accurate discretization to solve the compressible Navier-Stokes equations using an Arbitrary Lagrangian-Eulerian meshless method (SPH-MLS), which can be seen as a general formulation that includes some well-known meshfree methods as a particular case. The formulation is based on the use of Moving Least Squares (MLS) approximants as weight functions on a Galerkin formulation and to accurate discretize the convective and viscous fluxes. This formulation also verifies the discrete partition of unity and reproduces the zero-gradient condition for constant functions. Convective fluxes are discretized using Riemann solvers. In order to obtain high accuracy MLS is also used for the high-order reconstruction of the Riemann states. The accuracy and performance of the proposed method is demonstrated by solving different steady and unsteady benchmark problems., This work has been partially supported by Ministerio de Ciencia, Innovación y Universidades of the Spanish Government (grant #RTI2018-093366-B-I00) and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant# ED431C 2018/41), cofinanced with FEDER funds of the European Union. Luis Ramírez also acknowledges the funding provided by the Xunta de Galicia through the program Axudas para a mellora, creación, recoñecemento e estruturación de agrupacións estratéxicas do Sistema universitario de Galicia (reference # ED431E 2018/11), Xunta de Galicia; ED431C 2018/41, Xunta de Galicia; ED431E 2018/11
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

SPH-ALE Scheme for Weakly Compressible Viscous Flow with a Posteriori Stabilization

  • Eirís, Antonio
  • Ramírez, Luis
  • Fernández-Fidalgo, Javier
  • Couceiro, Iván
  • Nogueira, Xesús
[Abstract] A highly accurate SPH method with a new stabilization paradigm has been introduced by the authors in a recent paper aimed to solve Euler equations for ideal gases. We present here the extension of the method to viscous incompressible flow. Incompressibility is tackled assuming a weakly compressible approach. The method adopts the SPH-ALE framework and improves accuracy by taking high-order variable reconstruction of the Riemann states at the midpoints between interacting particles. The moving least squares technique is used to estimate the derivatives required for the Taylor approximations for convective fluxes, and also provides the derivatives needed to discretize the viscous flux terms. Stability is preserved by implementing the a posteriori Multi-dimensional Optimal Order Detection (MOOD) method procedure thus avoiding the utilization of any slope/flux limiter or artificial viscosity. The capabilities of the method are illustrated by solving one- and two-dimensional Riemann problems and benchmark cases. The proposed methodology shows improvements in accuracy in the Riemann problems and does not require any parameter calibration. In addition, the method is extended to the solution of viscous flow and results are validated with the analytical Taylor–Green, Couette and Poiseuille flows, and lid-driven cavity test cases., This research was funded by Ministerio de Ciencia, Innovación y Universidades of the Spanish Government Grant #RTI2018-093366-B-I00, by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant#ED431C 2018/41), Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Very high-order method on immersed curved domains for finite difference schemes with regular Cartesian grids

  • Fernández-Fidalgo, Javier
  • Nogueira, Xesús
  • Ramírez, Luis
  • Colominas, Ignasi
  • Clain, Stéphane
Versión aceptada de https://doi.org/10.1016/j.cma.2019.112782, [Abstract:] A new very high-order technique for solving conservation laws with curved boundary domains is proposed. A Finite Difference scheme on Cartesian grids is coupled with an original ghost cell method that provide accurate approximations for smooth solutions. The technology is based on a specific least square method with restrictions that enables to handle general Robin conditions. Several examples in two-dimensional geometries are presented for the unsteady Convection–Diffusion equation and the Euler equations. A fifth-order WENO scheme is employed with matching fifth-order reconstruction at the boundaries. Arbitrary high-order reconstruction for smooth flows is achievable independently of the underlying differential equation since the method works as a black-box dedicated to boundary condition treatment., This work has been partially supported by the Ministerio de Economía y Competitividad (grant #DPI2015-68431-R) and #RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grants #GRC2014/039 and #ED431C 2018/41), cofinanced with FEDER, Spain funds and the Universidade da Coruña, Spain. J. Fernandez-Fidalgo gratefully acknowledges the contributions of the IACOBUS Program, Spain and the INDITEX-UDC, Spain grant that have partially financed the present work. S. Clain acknowledges the financial support by FEDER – Fundo Europeu de Desenvolvimento Regional, Portugal, through COMPETE 2020 – Programa Operational Fatores de Competitividade, and the National Funds through FCT — Fundação para a Ciência e a Tecnologia, Portugal , project No. UID/FIS/04650/2013 and project No. POCI-01-0145-FEDER-028118., Xunta de Galicia; GRC2014/039, Xunta de Galicia; ED431C 2018/41, Fundação para a Ciência e a Tecnologia (Portugal); UID/FIS/04650/2013, Fundação para a Ciência e a Tecnologia (Portugal); POCI-01-0145-FEDER-028118
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

The Impact of the Geometry of the Effective Propped Volume on the Economic Performance of Shale Gas Well Production

  • Soage Quintáns, Manuel Andrés
  • Juanes, Rubén
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
Este artigo pertence ao número especial: Special Issue Hydrocarbon Development in Unconventional Shale and Carbonate Fields: Decline Curve Analysis Methods Combined with Data Analytics, [Abstract] We analyze the effect that the geometry of the Effective Propped Volume (EPV) has on the economic performance of hydrofractured multistage shale gas wells. We study the sensitivity of gas production to the EPV’s geometry and we compare it with the sensitivity to other parameters whose relevance in the production of shale gas is well known: porosity, kerogen content and permeability induced in the Stimulated Recovery Volume (SRV). To understand these sensitivities, we develop a high-fidelity 3D numerical model of shale gas flow that allows determining both the Estimated Ultimate Recovery (EUR) of gas as well as analyzing the decline curves of gas production (DCA). We find that the geometry of the EPV plays an important role in the economic performance and gas production of shale wells. The relative contribution of EPV geometry is comparable to that of induced permeability of the SRV or formation porosity. Our results may lead to interesting technological developments in the oild and gas industry that improve economic efficiency in shale gas production., This research has been partially funded by Ministerio de Ciencia, Innovación y Universidades of the Spanish Government (grant RTI2018-093366-B-I00), by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant#ED431C 2018/41) and by the Group of Numerical Methods in Engineering of the Universidade da Coruña., Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Isogeometric topology optimization of structures using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the “Xunta de Galicia (Secretaría Xeral de Universidades)” and the European Union (European Social Fund—ESF) through grant ED481A-2016/387, by the Spanish Government “(Ministerio de Universidades)” through “Margarita Salas grants for the training of new PhD-2022” [RSU.UDC.MS25], by Feder funds of the European Union to the Spanish Government (“Ministerio de Economía y Competitividad”) through grants DPI2015-68341-R and RTI2018-093366-B-I00, by the Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” of the “Plan de recuperación, transformación y resiliencia” [TED2021-129991B-C31] and [TED2021-129805B-100] with FEDER and EU Next-Generation funds, by the “Xunta de Galicia” (“Consellería de Educación, Universidade e Formación Profesional”) through grants GRC2014/039 and GRC2018/41, by the “Xunta de Galicia” “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], and by research fellowships of the University of A Coruña and the “Fundación de la Ingeniería Civil de Galicia”., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Structural topology optimization with high spatial definition by using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
High Performance and Optimum Design of Structures and Materials V (WIT Transactions on The Built Environment; v.9). The studies contained in this volume were presented at the International Conference on High Performance and Optimum Structures and Materials Encompassing Shock and Impact Loading and address issues involving advanced types of structures, particularly those based on new concepts, and shock and impact resistance., [Abstract:] The first formulation of topology optimization was proposed in the 1980s. Since then, many contributions have been presented with the purpose of improving its efficiency and expanding its field of application. The aim of this research is to develop a structural topology optimization algorithm considering minimum weight and stress constraints. Structural topology optimization with stress constraints has been previously formulated with several different approaches, mainly: local stress constraints, global stress constraints or block aggregation of stress constraints. In this research the overweight approach, an improvement of the so-called damage approach, is used. In this method, a virtual relative density (VRD) is defined as a function of the violation of the local stress constraints. VRD is increased as the stresses exceed the maximum allowable value, with the exception of the areas with the minimum value of the relative density, since full-void solutions are intended. The distribution of the material in the domain is modelled using two different approaches: a uniform relative density within each element of the mesh and a relative density defined by means of quadratic B-splines. For this reason, the structural analysis is performed by means of the finite element method (FEM) and the isogeometric analysis (IGA) respectively. The optimization is addressed by means of the sequential linear programming algorithm (SLP), which is driven by the information provided by a full first order sensitivity analysis extension of both FEM and IGA formulations. Finally, the overweight approach is tested by means of some two dimensional problems. The domain has been divided in an elevated number of elements to attain high spatial definition solutions. The results show that the overweight approach is a feasible alternative for the damage approach and the stress constraints aggregation techniques to solve the topology optimization problem. A comparison between both formulations of the material distribution is included., This work has received financial support from the Xunta de Galicia (Secretaria Xeral de Universidades) and the European Union (European Social Fund (ESF)) through “Grants for funding predoctoral stages in universities, public research organisms and other R&D entities of Galicia” ED481A-2016/387. This work has also been partially supported also by FEDER funds of the European Union, by the “Ministerio de Economía y Competitividad” of the Spanish Government through grants DPI2015-68431-R and RTI2018-093366-B-I00 and by the “Conselleria de Educación, Universidade e Formación Profesional” of the Xunta de Galicia, through grants for the consolidation and structuring of competitive research units of the Galician University System: GRC2014/039 and GRC2018/41., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A new formulation for transient response optimization of structures based on constraint aggregation functions

  • Couceiro, Iván
  • París, José
  • Ramírez, Luis
  • Navarrina, Fermín
Versión aceptada de https://doi.org/10.1080/0305215X.2021.1957469, [Abstract] This article proposes a new formulation for the treatment of time-dependent constraints in the transient response optimization of structures. The novel method is based on constraint aggregation functions. However, instead of lumping the constraints in the physical domain, the method condenses the information of the time-dependent constraints into one equivalent function while retaining information about the point-wise constraints. The formulation is gradient compatible and allows a considerable reduction of the optimization problem. Two versions of the Kreisselmeier–Steinhauser function are studied. The formulation is tested on the size optimization of truss and framed three-dimensional structures subjected to dynamic loads. The methodology is tested in very-large transient response optimization problems in order to check its efficiency. Results show that the formulation is able guarantee the fulfilment of the constraints in the whole time interval studied. The size of the transient response optimization problem is highly reduced, allowing a reduction of the computational resources needed., This work has been partially supported by FEDER funds of the European Union, by the Ministerio de Economía y Competitividad of the Spanish Goverment through grant #DPI2015-68431-R and grant #RTI2018-093366-B-100, by the Secretaría Xeral de Universidades of the Xunta de Galicia through grant #ED431C 2018/41, by the Consellería de Cultura, Educación e Ordenación Universitaria of the Xunta de Galicia by a grant awarded to the University of A Coruña, and by research fellowships of the University of A Coruña and the Fundación de la Ingeniería Civil de Galicia., Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

An a posteriori-implicit turbulent model with automatic dissipation adjustment for Large Eddy Simulation of compressible flows

  • Nogueira, Xesús
  • Ramírez, Luis
  • Fernández-Fidalgo, Javier
  • Deligant, Michaël
  • Khelladi, Sofiane
  • Chassaing, Jean-Camille
  • Navarrina, Fermín
© 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/(opens in new tab/window)  https://www.elsevier.com/about/policies-and-standards/sharing . This is an accepted version of the following published document: https://doi.org/10.1016/j.compfluid.2019.104371, [Abstract] In this work we present an a posteriori high-order finite volume scheme for the computation of compressible turbulent flows. An automatic dissipation adjustment (ADA) method is combined with the a posteriori paradigm, in order to obtain an implicit subgrid scale model and preserve the stability of the numerical method. Thus, the numerical scheme is designed to increase the dissipation in the control volumes where the flow is under-resolved, and to decrease the dissipation in those cells where there is excessive dissipation. This is achieved by adding a multiplicative factor to the dissipative part of the numerical flux. In order to keep the stability of the numerical scheme, the a posteriori approach is used. It allows to increase the dissipation quickly in cells near shocks if required, ensuring the stability of the scheme. Some numerical tests are performed to highlight the accuracy and robustness of the proposed numerical scheme., The authors greatly acknowledge the kind help of Dr. D. P. Rizzeta, Dr. Lin Fu and Dr. H. C. Yee, who kindly share with us the initial conditions for the turbulence decay problems. This work has been partially supported by FEDER funds of the European Union, Grants #DPI2015-68431-R of the Ministerio de Economía y Competitividad and #RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government, by the Consellería de Cultura, Educación e Ordenación Universitaria of the Xunta de Galicia (program Axudas para potenciación de grupos de investigación do Sistema Universitario de Galicia 2018, grant #ED431C 2018/41) and Research fellowships of the Universidade da Coruña and the Fundación de la Ingeniería Civil de Galicia., Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

The Slicing Method: Determining Insensitivity Regions of Probability Weighting Functions

  • Egozcue, Martin
  • Fuentes García, Luis
  • Zitikis, Ricardas
[Abstract:] A popular rule of thumb, usually called “heuristic technique” in Behavioral Economics, for determining the likelihood insensitivity regions of probability weighting functions (pwf’s) is based on searching for points at which the pwf’s are twice their values at half the points. Although this technique works remarkably well for many commonly used pwf’s, it sometimes fails to provide the correct answer. In order to cover the class of pwf’s for which the heuristic technique does not work, in this paper we propose, discuss, and illustrate an extension of the technique into what we call the “slicing method,” which is capable of finding the subadditivity and insensitivity regions of any continuous pwf., The research has been supported by the National Agency for Research and Innovation (ANII) of Uruguay, the Natural Sciences and Engineering Research Council (NSERC) of Canada, and the national research organization Mathematics of Information Technology and Complex Systems (MITACS) of Canada. This work has also been partially supported by the Ministerio de Ciencia, Innovación y Universidades (grant #RTI2018-093366-B-I00) of the Spanish Government and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant #ED431C 2018/41), cofinanced by the Universidade da Coruña (#GMNI-G000177)., Xunta de Galicia; ED431C 2018/41, Universidade da Coruña; GMNI-G000177
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Dynamic Response Optimization of Steel Jackets for Offshore Wind Turbines With Fatigue and Time-Dependent Constraints

  • Couceiro, Iván
  • París, José
  • Navarrina, Fermín
  • Colominas, Ignasi
  • Casteleiro, Manuel
[Abstract] In this work, a methodology for the shape and sizing optimization of steel jackets for offshore wind turbines considering the full dynamic response of the structure in a fully-coupled model is presented. The coupled model includes the jacket, the transition piece, the tower of the turbine, the rotor-nacelle assembly and the blades. The rotation of the blades is also included in the model. Ultimate limit state (ULS), fatigue limit state (FLS) and natural frequency constraints are imposed to the model and the weight of the steel jacket is optimized using design variables that control the size of the elements and the overall geometry of the structure. A new formulation is introduced to deal with time-dependent ULS constraints allowing an efficient treatment of the constraints while being suitable for gradient-based optimization. The formulation reduces the size of the large-scale constrained optimization problem and the constraints are satisfied at every time-step of the dynamic analysis. This work represents the first optimization approach to tackle the optimization of the jackets in fully-coupled models with constraints in the complete dynamic response and in the fatigue damage. A numerical example is shown and optimized achieving a significant reduction of half of the weight of the structure and a considerable change in the overall geometry of the structure., This work has been partially supported by the Ministerio de Economía y Competitividad (Grants #DPI2015-68431R and #RTI2018-093366-B-I00) of the Spanish Government, by Consellería de Cultura, Educación e Ordenación Universitaria of the Xunta de Galicia (Grants #GRC2014/039 and #ED431c 2016/41) co-financed with FEDER funds, and by research fellowships of Fundación de la Ingeniería Civil de Galicia., Xunta de Galicia; GRC2014/039, Xunta de Galicia; ED431c 2016/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A reduced-dissipation WENO scheme with automatic dissipation adjustment

  • Fernández-Fidalgo, Javier
  • Ramírez, Luis
  • Tsoutsanis, Panagiotis
  • Colominas, Ignasi
  • Nogueira, Xesús
Versión aceptada de https://doi.org/10.1016/j.jcp.2020.109749, [Abstract:] In this paper, we propose a novel modification to the WENO-family schemes to reduce its intrinsic dissipation. In this work, we focus on the WENO5 scheme, which is rewritten in terms of a central plus a dissipative part, and then, the dissipation is controlled based on the flow physics. This is achieved by using the automatic dissipation adjustment (ADA) method in an a posteriori approach. This methodology allows us to greatly increase the accuracy of the original scheme at the same time ensure the robustness of the numerical method. The accuracy and robustness of the proposed scheme are tested by several selected numerical benchmarks., This work has been partially supported by the Ministerio de Ciencia, Innovación y Universidades (grant #RTI2018-093366-B-I00) of the Spanish Government and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grant #ED431C 2018/41), cofinanced by the Universidade da Coruña (#GMNI-G000177). Xesús Nogueira also acknowledges the funding provided by the Xunta de Galicia through the program Axudas para a mellora, creación, recoñecemento e estruturación de agrupacións estratéxicas do Sistema universitario de Galicia (reference #ED431E 2018/11)., Xunta de Galicia; GMNI-G000177, Xunta de Galicia; ED431C 2018/41, Xunta de Galicia; ED431E 2018/11
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Numerical assessment of fan blades screen effect on fan/OGV interaction tonal noise

  • Foulquié, Charles
  • Khelladi, Sofiane
  • Deligant, Michaël
  • Ramírez, Luis
  • Nogueira, Xesús
  • Mardjono, Jacky
Versión aceptada de https://doi.org/10.1016/j.jsv.2020.115428, [Abstract:] This work deals with sound generation and transmission in a fan stage. The study is done on a subsonic Fan stage and interaction noise between the fan wakes and the Outlet Guide Vanes (OGV) is considered. For this purpose, the Linearized Euler Equations (LEE) are solved with a steady axisymmetric flow. The acoustic sources are modelled by a scattering approach. Numerical simulations are carried out in an unwrapped cylindrical layer using a high-order finite volume solver. In order to explicitly take into account the moving fan blades into the propagation medium, a high-resolution sliding mesh technique is used. The simulation results, which highlight the screen effect of moving fan blades on fan/OGV interaction tones, are consistent with analytical literature., Xesús Nogueira and Luis Ramírez acknowledge the support given by FEDER funds of the European Union, Grants #DPI2015-68431-R of the Ministerio de Economía y Competitividad and #RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government, and by the Consellería de Cultura, Educación e Ordenación Universitaria of the Xunta de Galicia (program Axudas para potenciación de grupos de investigación do Sistema Universitario de Galicia 2018, grant #ED431C 2018/41)., Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

WENO Schemes on Unstructured Meshes Using a Relaxed a Posteriori MOOD Limiting Approach

  • Farmakis, Pericles S.
  • Tsoutsanis, Panagiotis
  • Nogueira, Xesús
Os datos relativos aos resultados deste artigo poden descargarse desde https://doi.org/10.17862/cranfield.rd.11836164.v1 baixo unha licenza CC-BY 4.0., [Abstract] In this paper a relaxed formulation of the a posteriori Multi-dimensional Optimal Order Detection (MOOD) limiting approach is introduced for weighted essentially non-oscillatory (WENO) finite volume schemes on unstructured meshes. The main goal is to minimise the computational footprint of the MOOD limiting approach by employing WENO schemes—by virtue of requiring a smaller number of cells to reduce their order of accuracy compared to an unlimited scheme. The key characteristic of the present relaxed MOOD formulation is that the Numerical Admissible Detector (NAD) is not uniquely defined for all orders of spatial accuracy, and it is relaxed when reaching a 2nd-order of accuracy. The augmented numerical schemes are applied to the 2D unsteady Euler equations for a multitude of test problems including the 2D vortex evolution, cylindrical explosion, double-Mach reflection, and an implosion. It is observed that in many events, the implemented MOOD paradigm manages to preserve symmetry of the forming structures in simulations, an improvement comparing to the non-MOOD limited counterparts which cannot be easily obtained due to the multi-dimensional reconstruction nature of the schemes., The authors acknowledge the computing time on the UK national high-performance computing service ARCHER that was provided through the UK Turbulence Consortium in the framework of the EPSRC, United Kingdom grant EP/L000261/1 and the computing time on the University of Cambridge Tier-2 national high-performance computing service Peta4 provided through the EPSRC, United Kingdom grant EP/P020259/1. X. Nogueira has been partially supported by FEDER, Spain funds of the European Union, Grant RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government, Reino Unido. Engineering and Physical Sciences Research Council; EP/L000261/1, Reino Unido. Engineering and Physical Sciences Research Council; EP/P020259/1, https://doi.org/10.17862/cranfield.rd.11836164.v1
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Analysis of array spacing on tidal stream turbine farm performance using Large-Eddy Simulation

  • Ouro, Pablo
  • Ramírez, Luis
  • Harrold, Magnus
[Abstract:] Design of efficient tidal arrays relies on the adopted spacing between turbines and their mutual interplay. Turbines affected by wake shadowing operate in harsher flow conditions, such as higher turbulence levels or lower incident velocity, which leads to reduced performance and larger extreme and fatigue loading. To extend the knowledge about turbine-to-turbine interplay in tidal arrays, high-fidelity numerical simulations using a Large-Eddy Simulation-Actuator Line Method (LES-ALM) are carried out to quantify the impact of row spacing. The developed Digital Offshore FArm Simulator (DOFAS) validates well with experimental data in terms of flow statistics and hydrodynamic coefficients, which demonstrate its adequacy to resolve the complex fluid-turbines interaction. In the cases with spacing of four and eight diameters between the rows, the lack of wake recovery has a detrimental effect on back-row turbines whose efficiency dramatically drops compared to those in the front-row. The LES-ALM captured the low-frequency wake meandering phenomenon responsible for uneven periodic loading on back-row turbines. The devices placed in the front-row suffer the largest thrust loads, blade-root bending moments and support structure moments, whilst the outermost back-row turbines experience the largest tower yaw moments due to their simultaneous exposure to low-momentum turbulent wakes and high-velocity free-stream flow. Finally, damage equivalent loads estimated by the LES-ALM are maximum for the front-row turbines except the tower yaw moment which is maximum on the outermost back-row turbines., The authors would like to acknowledge the support of the Supercomputing Wales project, which is part-funded by the European Regional Development Fund (ERDF) via the Welsh Government. This research was partially supported by the UK Engineering and Physical Sciences Research Council (EPSRC) under the grant number EP/R51150X/1, and the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government (grant #RTI2018-093366-B-I00). Information on the data underpinning the results presented here, including how to access them, can be found in the Cardiff University data catalogue at 10.17035/d.2019.0083917166., Reino Unido. Engineering and Physical Sciences Research Council (EPSRC); EP/R51150X/1
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A high-order finite volume method with improved isotherms reconstruction for the computation of multiphase flows using the Navier–Stokes–Korteweg equations

  • Martínez, Abel
  • Ramírez, Luis
  • Nogueira, Xesús
  • Khelladi, Sofiane
  • Navarrina, Fermín
Versión aceptada de https://doi.org/10.1016/j.camwa.2019.07.021, [Abstract] In this work we solve the Navier–Stokes–Korteweg (NSK) equations to simulate a two-phase fluid with phase change. We use these equations on a diffuse interface approach, where the properties of the fluid vary continuously across the interface that separates the different phases. The model is able to describe the behavior of both phases with the same set of equations, and it is also able to handle problems with great changes in the topology of the problem. However, high-order derivatives are present in NSK equations, which is a difficulty for the design of a numerical method to solve the problem. Here, we propose the use of a high-order Finite Volume method with Moving Least Squares approximations to handle high-order derivatives and solve the NSK equations. Moreover, a new methodology to obtain accurate equations of state is presented. In this method, we use any accurate equation of state for the pure phases. Under the saturation curve, a B-spline reconstruction fulfilling a given set of thermodynamic criteria is performed. The new EOS can be used for computations using diffuse interface modeling. Several numerical examples to show the accuracy of the new approach are presented., This work has been partially supported by the Ministerio de Economía y Competitividad (grant #DPI2015-68431-R) and #RTI2018-093366-B-I00 of the Ministerio de Ciencia, Innovación y Universidades of the Spanish Government and the Universidade da Coruña and by the Consellería de Educación e Ordenación Universitaria of the Xunta de Galicia (grants # GRC2014/039 and # ED431C 2018/41), cofinanced with FEDER funds and the Universidade da Coruña. Xesús Nogueira also acknowledges the funding provided by the Xunta de Galicia through the program Axudas para a mellora, creación, recoñecemento e estruturación de agrupacións estratéxicas do Sistema universitario de Galicia (reference # ED431E 2018/11)., Xunta de Galicia; GRC2014/039, Xunta de Galicia; ED431E 2018/11, Xunta de Galicia; ED431C 2018/41
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Statistical assessment of the financial performance of shale-gas wells coupling stochastic and numerical simulation

  • Soage Quintáns, Manuel Andrés
  • Ramírez, Luis
  • Juanes, Rubén
  • Cueto-Felgueroso Landeira, Luis
  • Colominas, Ignasi
[Abstract]: We present a new methodology to statistically determine the net present value (NPV) and internal rate of return (IRR) as financial estimators of shale gas investments. Our method allows us to forecast, in a fully probabilistic setting, financial performance risk and to understand the importance of the different factors that impact investment. The methodology developed in this study combines, through Monte Carlo simulation, the computational modeling of gas production from shale gas wells with a stochastic simulation of gas price as a geometric Brownian motion (GMB). To illustrate the methodology's validity, we apply it to an analysis of investments in shale gas wells. Our results show that gas price volatility is a key variable in the performance of an investment of this type, in such a way that at high volatilities, the potential return on an investment in shale gas increases significantly, but so do the risks of economic loss. This finding is consistent with the history of shale gas operations in which huge investment successes coexist with unexpected investment failures., This research was partially funded by Goverment of Spain, Ministry of Science, Innovation and Universities (grant: RTI2018- 093366-B-I00), by Goverment of Spain, Ministry of Universities (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by the Xunta de Galicia, Consellería de Educación e Ordenación Universitaria (grant:#ED431C 2018/41), and by the Group of Numerical Methods in Engineering of the Universidade de A Coruna., Xunta de Galicia; ED431C 2018/41