Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Stability analysis of single-well cylindrical–spherical salt caverns for green hydrogen storage in bedded formations

  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • Juanes, Rubén
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: This study evaluates the viability of single-well spherical–cylinder salt caverns (SWCSs) for green hydrogen storage in bedded salt formations. Using numerical simulations, we demonstrate their ability to store significant volumes of energy, up to hundreds of GWh. SWCSs, designed with a single vertical well to avoid the horizontal drilling and multi-step dilution processes, provide a structurally viable and cost-effective alternative to twowell horizontal caverns (TWHs). These caverns take advantage of the horizontal dimensions of the bedded formations within their vertical constraints. Given the expanding role of hydrogen in global energy systems, the adoption of SWCSs can enhance the storage capacity and operational flexibility of systems associated with the hydrogen economy. Future studies should validate these findings experimentally to promote the implementation of SWCSs., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, ‘‘Margarita Salas’’ Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented toward the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021- 129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Tesis de maestría (MasterThesis)

Study of operating cycles for underground hydrogen storage in salt caverns

  • Figueiras Velo, Francisco
[Abstract:] The idea of using hydrogen as a source of energy is growing nowadays with the different initiatives adopted for the decarbonisation of the economy. Among the different procedures for obtaining hydrogen, the generation by hydrolysis of water using electricity supplied by renewable energy sources, also known as ‘green hydrogen’, stands out, which can contribute to changing the global energy model, particularly in transport. Underground hydrogen storage can become a viable option compared to the use of above-ground metallic tanks, due to the permeability problems caused by the embrittlement of metallic structures in the presence of hydrogen, in addition to the safety challenges in storage and operations. In this project, the conditioning and creation of salt caverns is being studied. These can be created by adapting galleries in disused salt mines or by building them from the surface; this is a possibility due to the low permeability of halite (salt rock). It is expected to efficiently confine hydrogen without leakage. The research line presented here studies the structural stability of this type of storage facility, focusing on the hydrogen loading and unloading operating phases in cycles that may be very short (in the order of hours or days), throughout the 30-year lifetime of the operation. The operating cycles are composed of four different phases, arranged as follows: charging phase, holding phase at maximum pressure or working pressure, discharging phase, and holding phase at minimum pressure or cushion gas pressure. Currently, there is no generalised idea of the ideal duration of the phases that make up the operating cycles in order to obtain greater efficiency and safety in the cavern. In this study, the influence of these cycles on the stability of the cavern has been analysed by means of numerical simulation, focusing on the duration times of each of the phases that make up the cavern. To this end, a series of numerical tests have been carried out, studying the weight of each of the phases of the operating cycle on the stability of the cavern., [Resumo:] A idea de empregar hidróxeno como fonte de enerxía, está crecendo nos nosos días coas diferentes iniciativas adoptadas para a descarbonización da economía. Entre os diferentes procedementos de obtención destaca a xeración por hidrólise da auga mediante electricidade subministrada por fontes de enerxía renovables, tamén denominado “hidróxeno verde”, o cal pode contribuír a cambiar o modelo enerxético mundial, en particular no transporte. O almacenamento subterráneo de hidróxeno pódese convertir nunha opción viable fronte ´o emprego de tanques metálicos en superficie, debido ´os problemas de permeabilidade por fraxilización que presentan as estruturas metálicas fronte ao hidróxeno, ao que se unen os retos de seguridade no almacenamento e nas operacións. Neste proyecto, estúdase o acondicionamento e creación de cavernas salinas, as cales poden orixinarse adaptando galerías de minas de sal en desuso ou executándoas dende a superficie; isto ´e unha posibilidade debido ´a baixa permeabilidade que presenta a halita (rocha de sal). Espérase que permita confinar de xeito eficiente o hidróxeno sen producirse filtracións. A liña de investigación que se presenta estuda a estabilidade estrutural deste tipo de almacenamento, centrándose nas fases de operación de carga e descarga de hidróxeno en ciclos que poden ser moi curtos (da orde de horas ou días), ao longo dos 30 anos de vida útil da explotación. Os ciclos de operación compóñense de catro fases diferentes, ordenadas do seguinte xeito: fase de carga, fase de mantemento a presión máxima ou presión de traballo, fase de descarga, e fase de mantemento a presión mínima ou presión de gas colchón. Actualmente, non existe unha idea xeralizada de cal é a duración ideal das fases que compoñen os ciclos de operación para obter maior eficiencia e seguridade na caverna. Neste estudo, analizouse mediante simulación numérica, a influencia na estabilidade da caverna de ditos ciclos centrándonos nos tempos de duración de cada unha das fases que o compoñen. Para isto leváronse a cabo unha serie de ensaios numéricos, estudando o peso que presenta cada unha das fases do ciclo operativo na estabilidade da caverna., [Resumen:] La idea de emplear hidrógeno como fuente de enerxía, está creciendo en nuestros días con las diferentes iniciativas adoptadas para la descarbonización de la economía. Entre los diferentes procedimientos de obtención destaca la generación por hidrólisis del agua mediante electricidad suministrada por fuentes de enerxía renovables, también denominado “hidrógeno verde”, el cual puede contribuir a cambiar el modelo energético mundial, en particular en el transporte. El almacenamiento subterráneo de hidrógeno se puede convertir en una opción viable frente al empleo de tanques metálicos en superficie, debido a problemas de permeabilidad por fragilización que presentan las estructuras metálicas frente al hidrógeno, a lo que se unen los retos de seguridad en el almacenamiento y en las operaciones. En este proyecto, se estudia el acondicionamiento y creación de cavernas salinas, las cuales pueden originarse adaptando galerías de minas de sal en desuso o ejecutándolas desde la superficie; esto es una posibilidad debido a la baja permeabilidad que presenta la halita (roca de sal). Se espera que permita confinar de manera eficiente el hidrógeno sin producirse filtraciones. La línea de investigación que se presenta estudia la estabilidad estructural de este tipo de almacenamiento, centrándose en las fases de operación de carga y descarga de hidrógeno en ciclos que pueden ser muy cortos (del orden de horas o días), a lo largo de los 30 años de vida útil de la explotación. Los ciclos de operación se componen de cuatro fases diferentes, ordenadas de la siguiente manera: fase de carga, fase de mantenimiento a presión máxima o presión de trabajo, fase de descarga, y fase de mantenimiento a presión mínima o presión de gas colchón. Actualmente, no existe una idea generalizada de cuál es la duración ideal de las fases que componen los ciclos de operación para obtener mayor eficiencia y seguridad en la caverna. En este estudio, se ha analizado mediante simulación numérica, la influencia en la estabilidad de la caverna de dichos ciclos centrándonos en los tiempos de duración de cada una de las fases que lo componen. Para ello se han llevado a cabo una serie de ensayos numéricos, estudiando el peso que presenta cada una de las fases del ciclo operativo en la estabilidad de la caverna., This project has been funded by the following institutions: Spanish Government (FEDER and EU Next Generation funds): “Strategic projects oriented to the ecological and digital transition” “Plan de Recuperación, Transformación y Resiliencia” [TED2021-129991B-C31, TED2021-129805B-100]. Spanish Government through FEDER funds of the European Union: grants for “Knowledge generation projects” [PID2021-125447OB-I00]. Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities Research for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20). Xunta de Galicia through “Grants for the consolidation and structuring of competitive research units of the Galician University System - Competitive reference group” [ED431C 2022/06]. Universidade da Coruña and Fundación de la Ingeniería Civil de Galicia., Xunta de Galicia; ED431C 2022/06, Proxecto técnico (UDC.ETSECCP). Enxeñaría de Camiños, Canais e Portos. Curso 2023/2024
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Real Options Approach for Valuing Storage Contracts of Hydrogen–Methane Gas Blends

  • Cueto-Felgueroso Landeira, Luis
  • Soage Quintáns, Manuel Andrés
  • Alcaraz, Vicente
  • Lara, Antonio
[Abstract]: Decarbonization and growth of variable renewable generation have increased interest in hydrogen as a low-carbon energy carrier. Underground hydrogen storage in geological formations is one of the few scalable options for large-capacity energy storage, and retrofitting existing natural gas infrastructure to store methane–hydrogen blends offers a practical transition pathway. Yet valuing such storage contracts is difficult because hydrogen markets remain immature. This paper develops a real-options framework for methane–hydrogen storage contracts with a prescribed hydrogen energy fraction. Extending the Hamilton–Jacobi–Bellman approach used for natural gas storage, the model incorporates stochastic hydrogen prices and blend-specific operational constraints, including reduced effective energy capacity. Contract values and optimal operating policies are computed by solving a multi-factor HJB equation with a semi-implicit finite-difference scheme. The framework is verified against natural gas benchmarks and assessed by Monte Carlo cash-flow evaluation. Results show how value and policies depend on blend ratio, volatility, capacity, and contract duration., Work funded by project TED2021-129991B-C32 financed by Spanish MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR .
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Why poro-viscoplastic modeling matters for the long-term safety assessment of hydrogen storage in salt caverns

  • Fernández-Amado, Blanca
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Mosquera Feijoo, Juan Carlos
  • Cueto-Felgueroso Landeira, Luis
This publication is part of the grant TED2021-129991B-C31 funded by MICIU/AEI/10.13039/501100011033, Spain and by the “European Union NextGeneration EU/PRTR”. This research is also part of the grant PID2023-146793OB-I00 funded by MICIU/AEI/10.13039/501100011033, Spain and by FEDER, EU. Additional funding was provided by the “Margarita Salas” Grants Modality for the Training of Young Doctors, Spain, RD 289/2021 of April 20, by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) of the Universidade da Coruña, Spain . Funding for open access charge: Universidade da Coruña/CISUG, Spain, [Abstract:] Long-term stability of salt caverns operated for underground hydrogen storage remains a critical challenge, largely driven by time-dependent creep and stress redistribution under cyclic pressurization. We present novel contributions to long-term cavern assessment by introducing a poro-viscoplastic (PVP) framework that couples creep deformation with pore-pressure diffusion to reassess cavern integrity over multi-decade operation. This work opens new ground by demonstrating that even minimal porosity and permeability — commonly overlooked in traditional viscoplastic (VP) analyses — can significantly modify effective stresses under cyclic operation. An axisymmetric finite-element model at representative depths compares VP and PVP predictions for long and short injection–withdrawal cycles. PVP simulations produce different safety factors in instability-prone zones, driven by transient pore-pressure dissipation and the evolution of effective confinement. Results expose mechanisms absent from VP analyses and suggest VP models overestimate safety margins based on local safety-factor thresholds. The proposed approach provides a more physically grounded basis for defining safe operating envelopes., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Otros (Other)

Stability analysis of salt caverns in stratified formations for long-term hydrogen storage: influence of interlayers

  • Collazo Puñal, Lucía María
Proxecto técnico do Máster en Enxeñaría de Camiños, Canais e Portos, [Abstract]: The environmental problems associated to the use of fossil fuels, as well as the limited availability of these energy resources, make it necessary to modify the current energy system, replacing the fossil fuels with sustainable alternatives. However, the use of renewable energy sources has a marked intermittent nature, and it is therefore necessary to develop storage methods to compensate this variable nature. Green hydrogen, that is produced from renewable energy, is a promising solution. It makes possible to reduce the carbon emissions associated with fossil fuels, and offers a viable solution for storing energy during periods of high production and releasing that energy when needed. In this way, hydrogen is a very attractive option to achieve an energy transition to a more sustainable system. Among the different types of existing storage, the use of salt caverns presents a series of technical and economic benefits that position it as one of the most attractive options for carrying out green hydrogen storage. Conducting studies to analyse the behaviour of salt caverns is of great relevance. Thus, it is necessary to study the storage of green hydrogen in salt caverns, analysing the iteration of these caverns with solid strata intercalated in the salt. To achieve these objectives, a numerical model has been implemented, which allows for the analysis of the effect of the presence of rigid strata intercalated between the salts on the stresses and deformations existing in the caverns., [Resumen]: Los problemas medioambientales derivados del uso de combustibles fósiles, así como la propia escasez de estos recursos energéticos, hacen notable la necesidad de modificar el sistema energético actual, reemplazando los combustibles fósiles por alternativas sostenibles. Sin embargo, el uso de fuentes de energía renovables tiene un marcado carácter intermitente, por lo que es necesario desarrollar métodos de almacenamiento que permitan compensar esta naturaleza variable. El hidrógeno verde, que se produce a partir de energías renovables, se presenta como una solución prometedora para reducir las emisiones de carbono asociadas a los combustibles fósiles. Ofrece una solución viable para almacenar energía en períodos de alta producción, para posteriormente liberar dicha energía en caso de ser necesario. Así, el hidrógeno supone una muy buena opción para lograr una transición energética a un sistema más sostenible. Entre los distintos tipos de almacenamiento existentes, el uso de cavernas salinas presenta una serie de beneficios técnicos y económicos que lo posicionan como una de las opciones más atractivas para llevar a cabo el almacenamiento de hidrógeno verde. Realizar estudios en los que se analice el comportamiento de las cavernas salinas es de gran relevancia. De esta forma surge la necesidad de estudiar el almacenamiento de hidrógeno verde en cavernas salinas analizando la iteración de las mismas con estratos sólidos intercalados en la sal. Para lograr estos objetivos, se ha implementado un modelo numérico que permite analizar el efecto de la presencia de estratos rígidos intercalados entre las sales en las tensiones y deformaciones existentes en las cavernas., [Resumo]: Os problemas medioambientais derivados do uso de combustibles fósiles, así como a propia escaseza destes recursos enerxéticos, fan notable a necesidade de modificar o sistema enerxético actual, substituíndo os combustibles fósiles por alternativas sostibles. Con todo, o uso de fontes de enerxía renovables ten un marcado carácter intermitente, polo que é necesario desenvolver métodos de almacenamento que permitan compensar esta natureza variable. O hidróxeno verde, que se produce a partir de enerxías renovables, preséntase como unha solución prometedora para reducir as emisións de carbono asociadas aos combustibles fósiles. Ofrece unha solución viable para almacenar enerxía en períodos de alta produción, para posteriormente liberar dita enerxía en caso de ser necesario. Así, o hidróxeno supón unha moi boa opción para lograr unha transición enerxética a un sistema máis sostible. Entre os distintos tipos de almacenamento existentes, o uso de cavernas salinas presenta unha serie de beneficios técnicos e económicos que o posicionan como unha das opcións máis atractivas para levar a cabo o almacenamento de hidróxeno verde. Realizar estudos nos que se analice o comportamento das cavernas salinas é de gran relevancia. De esta forma xorde a necesidade de estudar o almacenamento de hidróxeno verde en cavernas salinas analizando a iteración das mesmas con estratos sólidos intercalados no sal. Para lograr estes obxectivos, implementouse un modelo numérico que permite analizar o efecto da presenza de estratos ríxidos intercalados entre os sales nas tensións e deformacións existentes nas cavernas., This study was funded by the following entities: This publication is part of the grant TED2021-129991B-C31 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”; Xunta de Galicia through “Grants for the consolidation and structuring of competitive research units of the Galician University System - Competitive reference group”. [ED431C 2022/06]; Fundación de la Ingeniería Civil de Galicia; Universidade da Coruña; Government of Spain, Ministry of Universities (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of a gunite lining on the stability of salt caverns in bedded formations for hydrogen storage

  • Méndez-Vázquez, Santiago
  • Soage Quintáns, Manuel Andrés
  • Navarrina, Fermín
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
  • Juanes, Rubén
[Abstract:] In this paper, a novel methodology to improve the structural behaviour and durability of bedded salt caverns for hydrogen storage is proposed. The suggested technology consists in applying a gunite lining over the whole cavern surface by means of a pneumatic air blowing. This continuous flow projected at high speed onto the cavern surface produces a self-compacted gunite facing. The effect of adding a gunite lining on the structural performance of a bedded salt cavern is analysed. The nonlinear finite element method is then applied to solve the inherent nonlinear solid mechanics problem. It is shown that reinforcing salt caverns with a gunite lining improves the cavern behaviour, specially in the case of caverns located within a horizontal salt stratum confined between other strata. When dealing with these salt formations, the stratum geometry limits the cavern height. In general, wider caverns that exhibit larger displacements are required to achieve a huge storage capacity. Moreover, these caverns can be located at a considerable depth, where the temperature has an important role on the creep deformation process. Therefore, the proposition of stabilization techniques is required to ensure both their structural integrity and the ground subsidence. This technology allows the safe exploitation of salt caverns located at bedded-type stratified horizontal salt formations., This research has been partially funded by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS, Spain (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE, Spain (grant #TED2021-129805B-I00), by the Ministry of Science, Innovation and Universities of the Spanish Government, Spain (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña, Spain., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Tesis de maestría (MasterThesis)

Thermal stability in salt caverns for green hydrogen storage: application to the geological formation of Cardona

  • Fernández-Amado, Blanca
[Resumen:] Uno de los objetivos que la humanidad ha buscado durante siglos es disponer de energía abundante, económica y limpia. Estos objetivos incluyen almacenar energía de manera eficiente y en grandes cantidades. Esto es algo que supondría un gran aporte a la sociedad y que aún no se ha alcanzado por completo. Esta investigación estudia el uso de cavernas de sal como sistemas de almacenamiento de hidrógeno verde en grandes cantidades. Se busca conocer el comportamiento estructural global de la caverna salina. De esta forma, cualquier formación salina puede calificarse como suceptible para la ejecución de estas estructuras de almacenamiento. Se ha analizado un prototipo de caverna salina en domos salinos aplicando métodos de elementos finitos en un modelo estructural. Este modelo tiene en cuenta la evolución de la temperatura y la profundidad. En primer lugar se realizará un estudio de sensibilidad en función de la profundidad de construcción de la caverna. Esta caverna estará en estado operativo y se estará explotando con ciclos de carga y descarga. Este análisis se ha repetido pero considerando que la caverna salina está abandonada, y por tanto está sometida a una presión interna de gas colchón. Posteriormente se ha analizado la termosensibilidad de la estructura de sal. Para conocer la respuesta estructural de la caverna salina ha sido necesario combinar un modelo elástico lineal y un modelo de fluencia de Norton, que se ha estudiado para una vida útil de 30 años. Los resultados de estos modelos permiten saber si las estructuras son seguras a lo largo de su vida útil. A través de estos modelos se alcanza una temperatura máxima posible para cada profundidad de construcción analizada. Con estas temperaturas máximas se conoce la envolvente térmica que marcará la zona de seguridad debido a los efectos térmicos. A medida que se aumenta la temperatura del macizo rocoso, se producirá una pérdida de resistencia de la roca salina, lo que provocará el colapso de la caverna. En cualquier caso, estas deformaciones excesivas provocarán una pérdida de volumen de la caverna que debe ser considerada como un indicar del nivel de servicio de la estructura. Finalmente, se ha modificado la geometría de la caverna salina de forma que se pueda conocer la influencia de la forma de la caverna bajo los efectos térmicos. Se pasa de una caverna vertical a una caverna horizontal, manteniendo el mismo volumen inicial. En esta investigación se observa que la tendencia divergente del problema hace que para los 30 años de vida útil se llegue a una profundidad límite. Esta profundidad máxima provoca que para mayores profundidades, el macizo rocoso pierda resistencia, y por tanto se pierda estabilidad. Además, cuando la caverna está trabajando bajo ciclos de carga y descarga de hidrógeno, la profundidad máxima es mayor que cuando la caverna está abandonada. Por otra parte, con el cambio de geometría se obtiene que la geometría horizontal es menos estable térmicamente, proporcionando unas menores profundidades admisibles. La metodología desarrollada se ha contrastado con casos reales de cavernas salinas que están actualmente en funcionamiento en EE.UU. Se ha comprobado que ninguno de ellos supera los valores límite de estabilidad determinados. Estos datos de casos reales sugieren que los resultados de este estudio son correctos., [Resumo:] Un dos obxectivos que a humanidade busca desde hai séculos e ter unha enerxía abundante, económica e limpa. Estes obxectivos inclúen almacenar enerxía de forma eficiente e en grandes cantidades. Isto ´e algo que suporía unha gran contribución ´a sociedade e que aínda non se conseguiu por completo. Esta investigación estuda o uso das cavernas de sal como sistemas de almacenamento de hidróxeno verde en grandes cantidades. Búscase coñecer o comportamento estrutural global da caverna de sal. Deste xeito, calquera formación salina pode cualificarse como susceptible para a execución destas estruturas de almacenamento. Analizouse un prototipo dunha caverna de sal en cúpulas de sal aplicando métodos de elementos finitos nun modelo estrutural. Este modelo ten en conta a evolución da temperatura e da profundidade. En primeiro lugar, realizarase un estudo de sensibilidade en función da profundidade de construción da cova. Esta caverna estará en estado operativo e explotarase con ciclos de carga e descarga. Esta análise repetiuse pero tendo en conta que a caverna de sal está abandonada, polo que está sometida a unha presión interna de gas de amortiguación. A través destas dúas análises pódese coñecer como se comportará a estrutura ante unha situación de funcionamento e posterior abandono. Posteriormente, analizouse a termosensibilidade da estrutura do sal. Para coñecer a resposta estrutural da caverna de sal foi necesario combinar un modelo elástico lineal e un modelo de fluencia Norton, que foi estudado para unha vida útil de 30 anos. Os resultados destes modelos permítennos saber se as estruturas son seguras ao longo da súa vida útil. Mediante estes modelos, acadase unha temperatura máxima posible para cada profundidade de construción analizada. Con estas temperaturas máximas coñécese a envolvente térmica que marcará a zona de seguridade polos efectos térmicos para a construción de covas de sal. A medida que aumenta a temperatura da masa rochosa, producirase unha perda de forza da rocha salina, provocando o colapso da caverna. En todo caso, estas deformacións excesivas provocarán unha perda de volume da caverna que debe considerarse como un indicador do nivel de servizo da estrutura. Finalmente, modificouse a xeometría da cova de sal para comprender a influencia da forma da cova baixo os efectos térmicos. Pasa dunha caverna vertical a unha horizontal, mantendo o mesmo volume inicial. Nesta investigación obsérvase que a tendencia diverxente do problema fai que se alcance unha profundidade límite para os 30 anos de vida útil. Esta profundidade máxima fai que a maiores profundidades, a masa rochosa perda resistencia, e polo tanto se perda a estabilidade. Ademais, cando a caverna está a traballar baixo ciclos de carga e descarga de hidróxeno, a profundidade máxima é maior que cando a caverna está abandonada. Por outra banda, co cambio de xeometría, a xeometría horizontal é menos estable termicamente, proporcionando profundidades admisibles máis baixas. Contrastouse a metodoloxía desenvolvida con casos reais de cavernas de sal que se atopan actualmente en funcionamento en EE.UU. Probouse que ningunha delas supera os valores límite de estabilidade determinados. Estes datos de casos reais suxiren que os resultados deste estudo son correctos., [Abstract:] One of the objectives that humanity has sought for centuries is to have abundant, economical and clean energy. These objectives include storing energy efficiently and in high quantities. This would make a great contribution to society. However, there is no great progress yet. This investigation studies the use of salt caverns as storage systems for green hydrogen in large quantities. With this goal, we want to know the global structural behavior of the salt cavern. It is possible to classify any land location as susceptible or not to incorporate these storage structures. A salt dome cavern prototype has been analyzed using a structural model applying finite element methods. This model takes into account the evolution of temperature and depth. Firstly, a sensitivity study will be carried out depending on the construction depth of the cavern. This cavern will be working under operational cycles. This analysis has been repeated but considering that the salt cavern is abandoned. That is, the cavern is under cushion gas pressure. Through these two analyzes it is possible to know how the structure will behave in a situation of operation and subsequent abandonment. Subsequently, the thermo-sensitivity of the salt structure has been analyzed. To know the structural response of the salt cavern it has been necessary to combine a linear elastic model and a Norton creep model. The useful life of the structure is 30 years. The results of these models allow us to know if the structures are safe throughout their useful life. Through these models, a maximum possible temperature is reached for each construction depth analyzed. With these maximum temperatures, the thermal envelope that will mark the safety zone for the construction of salt caverns is known. As the temperature of the rock mass increases, there will be a loss of strength of the salt rock. This loss causes the cavern to collapse. These excessive deformations will cause a loss of cavern volume that must be considered as an indicator of the level of serviceability. Finally, the geometry of the salt cavern has been modified to understand the influence of the shape of the cavern under thermal effects. It goes from a vertical cavern to a horizontal cavern, maintaining the same initial volume. In this research it is observed that the problem has a divergent trend. This trend means that a limit depth is reached by the 30-year useful life. The maximum depth causes that at greater depths, the rock mass loses resistance. Therefore, the structural stability is lost. On the other hand, when the cavern is working under hydrogen charge and discharge cycles, the maximum depth is greater than when the cavern is abandoned. It is also observed that the vertical shape of the cavern is more thermally stable than when the shape is horizontal. The horizontal geometry provides lower admissible depths. The developed methodology has been contrasted with real cases of salt caverns that are currently in operation in the USA. It has been proven that none of them exceed the determined stability limit values. These real cases data suggest that the results of this study are correct., This study was supported by the following entities: Spanish Government (FEDER and EU Next Generation funds):“Strategic projects oriented to the ecological and digital transition” “Plan de Recuperación, Transformación y Resiliencia” [TED2021-129991B-C31, TED2021-129805B-100]]. Spanish Government through FEDER funds of the European Union: grants for “Knowledge generation projects” [PID2021-125447OB-I00]. Xunta de Galicia through “Grants for the consolidation and structuring of competitive research units of the Galician University System - Competitive reference group” [ED431C 2022/06]. Fundación de la Ingeniería Civil de Galicia. Universidade da Coruña. Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, ‘Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20)., Xunta de Galicia; ED431C 2022/06, Proxecto técnico (UDC.ETSECCP). Enxeñaría de Camiños, Canais e Portos. Curso 2023/2024
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Isogeometric topology optimization of structures using the overweight approach

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this paper, a 2D isogeometric formulation of the material distribution for structural topology optimization considering minimum weight and local stress constraints using the overweight approach is proposed. The aim of this isogeometric formulation is to provide solutions with high spatial definition using a lower number of design variables in comparison with the formulations previously developed to define the material layout. Despite of this, an important number of local stress constraints has to be considered in the solution of the problem. For this purpose, an Overweight Constraint is used to consider all of them. The structural analysis is performed by means of the Isogeometric Analysis (IGA) and the distribution of material is modeled by means of quadratic B-splines. Moreover, the optimization is addressed by means of the Sequential Linear Programming algorithm (SLP) that is driven by the information provided by a full first-order sensitivity analysis extension of the IGA formulation. Finally, the proposed formulation is tested by means of some benchmark problems, and the results show that the isogeometric formulation provides solutions with high spatial definition. A comparison with a Finite Element Method (FEM) topology optimization formulation is included., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially supported by the “Xunta de Galicia (Secretaría Xeral de Universidades)” and the European Union (European Social Fund—ESF) through grant ED481A-2016/387, by the Spanish Government “(Ministerio de Universidades)” through “Margarita Salas grants for the training of new PhD-2022” [RSU.UDC.MS25], by Feder funds of the European Union to the Spanish Government (“Ministerio de Economía y Competitividad”) through grants DPI2015-68341-R and RTI2018-093366-B-I00, by the Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” of the “Plan de recuperación, transformación y resiliencia” [TED2021-129991B-C31] and [TED2021-129805B-100] with FEDER and EU Next-Generation funds, by the “Xunta de Galicia” (“Consellería de Educación, Universidade e Formación Profesional”) through grants GRC2014/039 and GRC2018/41, by the “Xunta de Galicia” “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], and by research fellowships of the University of A Coruña and the “Fundación de la Ingeniería Civil de Galicia”., Xunta de Galicia; ED481A-2016/387, Xunta de Galicia; GRC2014/039, Xunta de Galicia; GRC2018/41, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Viscoplastic analysis of salt caverns under time-asymmetric pressure cycling: definition and validation of a dimensionless operational rule with real case data

  • Figueiras Velo, Francisco
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: Operational asymmetry is a characteristic feature of underground gas storage systems—particularly in salt caverns—where injection phases are typically longer and steadier than withdrawal phases, which are shorter and more abrupt in response to fluctuating energy demand. Although large-scale hydrogen storage in salt caverns remains under development, similar operational patterns are expected once such facilities reach commercial maturity. Understanding how this temporal imbalance influences the mechanical behavior of the cavern is therefore important for assessing long-term performance and supporting the development of robust operational strategies for future hydrogen storage systems. This study introduces a dimensionless parameter, 𝜒 , to quantify the temporal asymmetry of cyclic operation. 𝜒 accounts not only for the residence times at high and low pressure but also for the different durations required to reach and leave these states. It is defined as the ratio between the effective durations of the high-pressure and low-pressure stages, including both the holding and ramp phases. The numerator represents the total effective time under high-pressure conditions, which includes half of the filling ramp (0.5𝜏fill ), the full high-pressure holding phase (𝜏WGP ), and half of the withdrawal ramp (0.5𝜏withd ). The denominator represents the complementary effective time under low-pressure conditions, consisting of half of the withdrawal ramp (0.5𝜏withd ), the full low-pressure holding phase (𝜏CGP ), and half of the filling ramp (0.5𝜏fill ). This formulation expresses the relative exposure of the rock mass to stabilizing (high-stress) versus creep-promoting (low-stress) conditions. A viscoplastic numerical model is developed to reproduce the time-dependent deformation of salt under cyclic pressure loading. Two measurable indicators are analyzed: the vertical displacement at the cavern roof and the volumetric shrinkage associated with viscoplastic mechanical closure. Results show that temporal asymmetry exerts a dominant control on the long-term mechanical response. When 𝜒 > 1 — indicating longer effective residence under high pressure — the cavern evolves toward a steady-state equilibrium; when 𝜒 < 1, viscoplastic deformation accelerates, promoting mechanical cavern closure. Comparison with operational data from three underground natural gas storage facilities in the United States is consistent with the 𝜒 ranges associated with the stability trends identified numerically. The proposed parameter 𝜒 thus provides a physically grounded and practical first-order indicator for interpreting long-term mechanical behavior in future hydrogen storage caverns, within the scope of a viscoplastic mechanical framework that does not explicitly account for damage, fracture, or permeability evolution., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was supported by the Ministry of Universities of Spain through the Margarita Salas Program (RD 289/2021), and by strategic projects oriented toward the ecological and digital transitions of the Ministry of Science and Innovation: GREEN-HUGS (grants #TED2021-129991B-C31 and #TED2021-129991B-C32) and NEPTUNE (#TED2021-129805B-I00). Additional support was provided by the project TOPACIUS (#PID2023-146793OB-100), the Department of Education and University Planning of the Xunta de Galicia (#ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) at the Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: CRUE-CSIC, Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

A Unifying Formulation for Nonlinear Solid Mechanics and Finite Element Analysis

  • Méndez-Vázquez, Santiago
[Abstract] A unifying formulation for nonlinear solid mechanics and Finite Element Analysis The finite element method is a well-known technology that allows to obtain an approximation to the real structural behaviour of a continuum solid media subjected to external forces. Its use is widely extended in civil engineering and many other fields, such as naval or aerospace engineering. This formulation can be derived under the linear or the nonlinear analysis framework. If the displacements and their corresponding gradients are assumed to be small, the analysis is considerably simplified, and it turns out to be carried out under the assumptions of the linear theory. However, if the displacements and/or the displacement gradients become large, the nonlinear analysis arises. As both analyses are based on different assumptions, they lead to completely different structural responses. And the accuracy of the results depends on the precisión of the assumptions made. That is, if the structure does not experiment small displacements or small displacement gradients, the linear analysis leads to unacceptable results that significantly differ from the real behaviour. Before running a structural simulation, the engineer has to decide, based on its experience and intuition, if the linear assumptions are correct. If the real structural response does not verify the linear assumptions, the linear analysis must be discarded and a nonlinear one should be carried out in order to obtain accurate results. Therefore, the assumptions made about the magnitude of both the displacements and the displacement gradients are quite important, since they define the theoretical framework of the structural analysis. The implications of each assumption have to be clearly defined. Most references in the existing literature do not clearly identify the implications of these assumptions. Therefore, one of the main aims of this work is to clearly identify them and to properly define both the linear and the nonlinear mathematical models that governs the structural behaviour according to each analysis. To accomplish this goal, a unifying formulation of both the linear and nonlinear solid mechanics complete and detailed is proposed. This formulation allows to completely describe and understand the deformation that an elastic solid experiments over time. A novel, simple, and clear nomenclature is proposed, in order to properly state the solid mechanics principles and the strictly necessary equations that describe this deformation process. Once the mathematical models are well-posed, the finite element method can be applied. A complete original derivation in both linear and nonlinear theory is presented. The linear one is also performed in order to compare this well-known derivation with the nonlinear version. One of the main differences between both formulations lies in the application of the external forces. In general, the linear formulation leads to a linear behaviour, whereas the nonlinear one drives to a nonlinear one. As long as the response is linear, the total load can be applied in only one step, and the load superposition principle usually applied in linear theory holds. However, this principles can no longer be applied when dealing with a nonlinear behaviour. If the response is nonlinear, a given load state has multiple possible solutions. Therefore, the total load can not be applied in only one step, and the load history has to be taken into account to reach the correct solution. To overcome these inconveniences, the external loads are usually applied according to an incremental loading process. This incremental strategy is actually a suitable procedure, since the structural response corresponding to each load step has to be solved iteratively. This procedure needs to start iterating from a close approximation to the solution. If the incremental loads are small enough, the result of the previous load step can be adopted to start the iterative procedure, and the convergence should be guaranteed. Many reference textbooks and research papers address the derivation of the nonlinear finite element formulations. Nevertheless, there is no consensus about a common nomenclature and notation. Moreover, the hypotheses made along these derivations are no clearly specified or are not even stated. Therefore, to completely comprehend the underlying physics and the essence of the proposed algorithms, a detailed overview which clarifies this knowledge becomes necessary. In this thesis, a great effort is made to clearly identify the intermediate hypotheses, and extensively analyse the origin and composition of the matrices that arise in nonlinear analysis. A detailed guideline that facilitates the deep comprehension of this powerful technology is proposed. This work states a unifying, clear and complete formulation for the nonlinear analysis field, so the extension of some research lines that have been carried out in linear theory until now becomes possible., [Resumen] Una formulación unificadora para la mecánica de sólidos no lineal y el análisis por el Método de los Elementos Finitos. El método de los elementos finitos es una tecnología bien conocida que permite obtener una aproximación al comportamiento estructural real de un medio sólido continuo sometido a fuerzas externas. Su uso está ampliamente extendido en ingeniería civil y en muchos otros campos, como la ingeniería naval o la aeronáutica. Esta formulación puede obtenerse bajo el marco de los análisis lineal o no lineal. Si se supone que los desplazamientos y sus correspondientes gradientes son pequeños, el análisis se simplifica considerablemente, y resulta realizarse bajo los supuestos de la teoría lineal. Sin embargo, si los desplazamientos y/o los gradientes de los desplazamientos se consideran grandes, surge el análisis no lineal. Como ambos análisis se basan en supuestos diferentes, conducen a respuestas estructurales completamente distintas. Y la exactitud de los resultados depende de la precisión de las hipótesis realizadas. Es decir, si la estructura no experimenta pequeños desplazamientos o pequeños gradientes de desplazamiento, el análisis lineal conduce a resultados inaceptables que difieren significativamente del comportamiento real. Antes de llevar a cabo una simulación estructural, el ingeniero tiene que decidir, basándose en su experiencia e intuición, si los supuestos lineales son correctos. Si la respuesta estructural real no verifica las hipótesis lineales, hay que descartar el análisis lineal y realizar uno no lineal para obtener resultados precisos. Por lo tanto, las hipótesis adoptadas acerca de la magnitud tanto de los desplazamientos como de los gradientes de los desplazamientos son muy importantes, ya que definen el marco teórico del análisis estructural. Es necesario definir claramente las implicaciones de cada supuesto. En la literatura existente, la mayoría de las referencias no identifica claramente las implicaciones de estos supuestos. Por lo tanto, uno de los principales objetivos de este trabajo es identificarlas claramente y definir adecuadamente los modelos matemáticos lineales y no lineales que rigen el comportamiento estructural asociado a cada análisis. Para lograr este objetivo, se propone una formulación unificadora de la mecánica de sólidos lineal y no lineal completa y detallada. Esta formulación permite describir y comprender completamente la deformación que experimenta un sólido elástico a lo largo del tiempo. Se propone una nomenclatura novedosa, sencilla y clara para enunciar adecuadamente los principios de la mecánica de sólidos y las ecuaciones estrictamente necesarias que describen este proceso de deformación. Una vez que los modelos matemáticos están bien planteados, se puede aplicar el método de los elementos finitos. Se presenta una obtención original completa tanto en teoría lineal como no lineal. Se presenta también el desarrollo lineal para compararlo con su versión no lineal. Una de las principales diferencias entre ambas formulaciones radica en la forma de aplicar las fuerzas externas. En general, la formulación lineal conduce a un comportamiento lineal, mientras que la no lineal conduce a uno no lineal. Mientras la respuesta sea lineal, la carga total puede aplicarse en un solo paso, y el principio de superposición de cargas de la teoría lineal puede aplicarse adecuadamente. Sin embargo, este principio ya no se puede aplicar cuando se trata con un comportamiento no lineal. Si la respuesta es no lineal, un estado de carga dado tiene múltiples soluciones posibles. Por lo tanto, la carga total no puede aplicarse en un solo paso, y hay que tener en cuenta el historial de carga para obtener la solución correcta. Para solventar estos inconvenientes, las cargas externas suelen aplicarse según un proceso de carga incremental. Esta estrategia incremental es en realidad un procedimiento adecuado, ya que la respuesta estructural correspondiente a cada paso de carga debe resolverse de forma iterativa. Este procedimiento necesita empezar a iterar desde una aproximación cercana a la solución. Si las cargas incrementales son lo suficientemente pequeñas, el resultado del paso de carga anterior puede adoptarse para iniciar el procedimiento iterativo, y la convergencia debería estar garantizada. Numerosos libros de texto de referencia y trabajos de investigación abordan la obtención de las formulaciones de elementos finitos no lineales. Sin embargo, no existe consenso sobre una nomenclatura y notación comunes. Además, las hipótesis formuladas a lo largo de estos desarrollos no se especifican claramente o ni siquiera se enuncian. Por lo tanto, para comprender completamente la física subyacente y la esencia de los algoritmos propuestos, se hace necesaria una visión más detallada que lo aclare. En esta tesis se hace un gran esfuerzo por identificar claramente las hipótesis intermedias y analizar ampliamente el origen y la composición de las matrices que surgen en el análisis no lineal. Se elabora una guía detallada que facilita el aprendizaje profundo de esta potente tecnología. Este trabajo plantea una formulación unificadora, clara y completa en el campo del análisis no lineal, para que la extensión de algunas líneas de investigación que hasta ahora se han llevado a cabo en teoría lineal sea posible., [Resumo] Unha formulación unificadora para a mecánica de sólidos non lineal e a análise polo Método dos Elementos Finitos. O método dos elementos finitos é unha tecnoloxía ben coñcida que permite obter unha aproximación ao comportamento estrutural real dun medio sólido continuo sometido a forzas externas. O seu uso está amplamente estendido en enxeñería civil e en moitos outros campos, como a enxeñería naval ou a aeronáutica. Esta formulación pode baixo o marco das análises lineal ou non lineal. Se se supón que os desprazamentos e os seus correspondentes gradientes son pequenos, a análise simplifícase considerablemente, e resulta realizarse baixo os supostos da teoría lineal. Con todo, se os desprazamentos e/o os gradientes dos desprazamentos se consideran grandes, xorde a análise non lineal. Como as dúas análises baseánse en supostos diferentes, conducen a respostas estruturais completamente distintas. E a exactitude dosresultados depende da precisión das hipóteses realizadas. É dicir, se a estrutura non experimenta pequenos desprazamentos ou pequenos gradientes de desprazamento, a análise lineal conduce a resultados inaceptables que difiren de forma significativa do comportamento real. Antes de levar a cabo unha simulación estrutural, o enxeñeiro ten que decidir, baseándose na súa experiencia e intuición, se os supostos lineais son correctos. Se a resposta estrutural real non verifica as hipóteses lineais, hai que descartar a análise lineal e realizar unha non lineal para obter resultados precisos. Por tanto, as hipóteses adoptadas acerca da magnitude tanto dos desprazamentos como dos gradientes dos desprazamentos son moi importantes, xa que definen o marco teórico da análise estrutural. É necesario definir claramente as implicacións de cada suposto. Na literatura existente, a maioría das referencias non identifica claramente as implicacións destes supostos. Por tanto, un dos principais obxectivos deste traballo é identificalas claramente e definir adecuadamente os modelos matemáticos lineais e non lineais que rexen o comportamento estrutural asociado a cada análise. Para lograr este obxectivo, proponse unha formulación unificadora da mecánica de sólidos lineal e non lineal completa e detallada. Esta formulación permite describir e comprender completamente a deformación que experimenta un sólido elástico ao longo do tempo. Proponse unha nomenclatura nova, sinxela e clara para enunciar adecuada mente os principios da mecánica de sólidos e as ecuacións estritamente necesarias que describen este proceso de deformación. Unha vez que os modelos matemáticos están ben expostos, pódese aplicar o método dos elementos finitos. Preséntase unha obtención orixinal completa tanto en teoría lineal como non lineal. Preséntase tamé n o caso lineal para comparalo coa versión non lineal. Unha das principais diferenzas entre ámbalas formulacións radica na forma de aplicar as forzas externas. En xeral, a formulación lineal conduce a un comportamento lineal, mentres que a non lineal conduce a unha resposta non lineal. Mentres a resposta sexa lineal, a carga total pode aplicarse nun só paso, e mantense o principio de superposición de cargas que adoita aplicarse na teoría lineal. Con todo, este principio non pode aplicarse cando se trata cun comportamento non lineal. Se a resposta é non lineal, un estado de carga dado ten múltiples solucións posibles. Por tanto, a carga total non pode aplicarse nun só paso, e hai que ter en conta o historial de carga para chegar á solución correcta. Para superar estes inconvenientes, as cargas externas adoitan aplicarse segundo un proceso de carga incremental. Esta estratexia incremental é en realidade un procedemento adecuado, xa que a resposta estrutural correspondente a cada paso de carga debe resolverse de forma iterativa. Este procedemento necesita empezar a iterar desde unha aproximación próxima á solución. Se as cargas incrementais son o suficientemente pequenas, o resultado do paso de carga anterior pode adoptarse para iniciar o procedemento iterativo, e a converxencia debería estar garantida. Numerosos libros de texto de referencia e traballos de investigación abordan a obtención das formulacións de elementos finitos non lineais. Con todo, non existe consenso sobre unha nomenclatura e notación comúns. Ademais, as hipóteses formuladas ao longo destas derivacións non se especifican claramente ou nin sequera se enuncian. Por tanto, para comprender completamente a física subxacente e a esencia dos algoritmos propostos, faise necesaria unha visión detallada que os aclare. Nesta tese faise un grande esforzo por identificar claramente as hipóteses intermedias e analizar amplamente a orixe e a composición das matrices que xorden na análise non lineal. Proponse unha guía detallada que facilita a aprendizaxe profunda desta potente tecnoloxía. Este traballo expón unha formulación unificadora, clara e completa no campo da análise non lineal, para que a extensión dalgunhas liñas de investigación que ata o de agora se levaron a cabo en teoría lineal sexa posible., Xunta de Galicia; ED481A-2018/159
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Multipatch IGA for stress-constrained minimum weight structural topology optimization

  • Villalba Rama, Diego
  • París, José
  • Couceiro, Iván
  • Navarrina, Fermín
This is an Accepted Manuscript of an article published by Taylor & Francis in Engineering Optimization published online: 24 Jan 2025 , available at: https://doi.org/10.1080/0305215X.2024.2436994., [Abstract]: In this article, an isogeometric analysis (IGA) formulation with various patches (multipatch approach) is proposed to solve the structural topology optimization (STO) problem. The multipatch formulation enables the solution of STO problems with geometries not equivalent to rectangles by using IGA. For this purpose, a minimum weight with stress constraints (MWSC) problem is stated. A quadratic B-splines basis defined for each patch is used to model the material distribution. The structural analysis is computed with IGA. The introduction of all of the stress constraints in the formulation of the problem is made with an overweight constraint (OC). Finally, the multipatch approach is validated with the solution of some benchmark problems., This work was partially supported by the Xunta de Galicia (Secretaría Xeral de Universidades) and the European Union (European Social Fund) through ‘Grants for Supporting the Predoctoral Stage in Universities of the Galician University System, in Research Public Organisms of Galicia and in Other Entities of the R&D system of the Galician Government–2016’ (ED481A-2016/387); by the Spanish Government (Ministerio de Universidades) through ‘Margarita Salas Grants for the Training of New PhD–2022’ ([)RSU.UDC.MS25); by the Spanish Government (Ministerio de Ciencia e Innovación) through ‘Knowledge Generation Projects’ (PID2021-125447OB-I00) and through ‘Strategic Projects Oriented to the Ecological and Digital Transition’ of the Plan de recuperación, transformación y resiliencia (TED2021-129991B-C31 and TED2021-129805B-100) with FEDER and EU Next Generation funds by the Xunta de Galicia (Consellería de Cultura, Educación, Formación Profesional y Universidades) through ‘Grants for the Consolidation and Structuring of Competitive Research Units of the Galician University System: Competitive Reference Group’ (ED431C 2022/06); and by research fellowships of the University of A Coruña and the Fundación de la Ingeniería Civil de Galicia.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Optimization of Financial Indicators in Shale-Gas Wells Combining Numerical Decline Curve Analysis and Economic Data Analysis

  • Soage Quintáns, Manuel Andrés
  • Juanes, Rubén
  • Colominas, Ignasi
  • Cueto-Felgueroso Landeira, Luis
Este artigo pertence ao número especial: Integrated Approaches for Unconventional Oil and Gas Extraction and Exploration, [Abstract:] We present a methodology to determine optimal financial parameters in shale-gas production, combining numerical simulation of decline curves and stochastic modeling of the gas price. The mathematical model of gas production considers free gas in the pore and the gas adsorbed in kerogen. The dependence of gas production on petrophysical parameters and stimulated permeability is quantified by solving the model equations in a 3D geometry representing a typical fractured shale well. We use Monte Carlo simulation to characterize the statistical properties of various common financial indicators of the investment in shale-gas. The analysis combines many realizations of the physical model, which explores the variability of porosity, induced permeability, and fracture geometry, with thousands of realizations of gas price trajectories. The evolution of gas prices is modeled using the bootstrapping statistical resampling technique to obtain a probability density function of the initial price, the drift, and the volatility of a geometric Brownian motion for the time evolution of gas price. We analyze the Net Present Value (NPV), Internal Rate of Return (IRR), and Discounted Payback Period (DPP) indicators. By computing the probability density function of each indicator, we characterize the statistical percentile of each value of the indicator. Alternatively, we can infer the value of the indicator for a given statistical percentile. By mapping these parametric combinations for different indicators, we can determine the parameters that maximize or minimize each of them. We show that, to achieve a profitable investment in shale-gas with high certainty, it is necessary to place the wells in extremely good locations in terms of geological parameters (porosity) and to have exceptional fracturing technology (geometry) and fracture permeability. These high demands in terms of petrophysical properties and hydrofracture engineering may explain the industry observation of “sweet spots”, that is, specific areas within shale-gas plays that tend to yield more profitable wells and where many operators concentrate their production. We shed light on the rational origin of this phenomenon: while shale formations are abundant, areas prone to having a multi-parameter combination that renders the well profitable are less common., This research has been partially funded by the Ministry of Universities of the Spanish Government (grant: Subsidies to Public Universities for the Requalification of the Spanish University System, “Margarita Salas” Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20), by strategic projects oriented towards the ecological transition and the digital transition of the Ministry of Science and Innovation: GREEN-HUGS (grant #TED2021-129991B-C31 and grant #TED2021-129991B-C32) and NEPTUNE (grant #TED2021-129805B-I00), by the Department of Education and University Planning of the Xunta de Galicia (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering of the Universidade da Coruña., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Temperature influence on the stability and the viability of salt caverns due to creep phenomena

  • Fernández-Amado, Blanca
  • Soage Quintáns, Manuel Andrés
  • París, José
  • Colominas, Ignasi
  • Juanes, Rubén
  • Cueto-Felgueroso Landeira, Luis
[Abstract]: This study investigates the viability of using salt caverns as large-scale storage solutions for green hydrogen, considering the effects of the temperature. To accomplish this, a structural model of a prototype salt dome cavern was evaluated using finite element methods, taking into account variations in temperature and depth. As the temperature of the rock mass rises, the strength of the salt diminishes, which can lead to deformation and collapse of the cavern. Additionally, analyzing the deformation of the cavern is important, as it leads to a reduction in volume and serves as an indicator of the cavern’s serviceability. The methodology developed in this study enables the classification of land areas as suitable or unsuitable for green hydrogen storage in salt caverns based on a safety zone defined by the temperature-depth relationship. In addition, the study compares two cavern geometries—one nearly vertical and the other nearly horizontal—while keeping the same initial volume. This comparison emphasizes the crucial role of geometry in the stability analysis, particularly in relation to the thermal effects on the rock salt. The proposed safety zone solution was validated through real-world examples of operational salt caverns in the USA, confirming its applicability and accuracy., This publication is part of the grant TED2021-129991B-C31 funded by MICIU/AEI/10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. This research is also part of the grant PID2023-146793OB-I00 funded by MICIU/AEI/10.13039/5011000 11033 and by FEDER, EU. Additional funding was provided by the ‘‘Margarita Salas’’ Grants Modality for the Training of Young Doctors, RD 289/2021 of April 20, by Department of Education and University Planning of the Xunta de Galicia, Spain (grant #ED431C 2022/06), and by the Group of Numerical Methods in Engineering (GMNI) of the Universidade da Coruña, Spain. Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED431C 2022/06
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

IGA-based topology optimization in the design of stress-constrained compliant mechanisms

  • Villalba Rama, Diego
  • Gonçalves, M.
  • Dias-de-Oliveira, J.
  • Andrade-Campos, A.
  • Valente, R.
[Abstract:] Topology design of compliant mechanisms has gained wide popularity among the scientific community, and their use in the mechanical engineering field is being of upmost importance. In this paper, an isogeometric analysis (IGA) formulation is used to solve the topology optimization problem of compliant mechanisms. Stress constraints are introduced in the problem to guarantee the attainment of realistic solutions. For this purpose, an overweight constraint is considered for the design process, replacing the use of local stress constraints. The material distribution in the domain is modeled with quadratic B-splines and with a uniform relative density within each element of the mesh. These strategies to define the material layout are used to compare the IGA-based formulation with the finite element (FEM) formulation. The IGA formulation provides several advantages with respect to the classical FEM-based approaches that are shown and analyzed with an input-parameters sensitivity analysis. The sensitivity analysis and the assessment of the importance of introducing of stress constraints in the problem are developed by solving two benchmark problems. Regarding the sensitivity analysis of input parameters, the results show that the ratio between the material and the springs stiffnesses is the parameter with the largest influence on the solutions of the problem. Moreover, the advantages of the IGA formulations over FEM formulations are related with the computational time, the smoothness of the structural borders, and the non-appearance of the checkerboard patterns. With respect to the stress constraints, the results show that they have to be considered in order to avoid instability and structural integrity problems., Universidades)” through “Margarita Salas grants for the training of new PhD—2022” [RSU.UDC.MS25], by Spanish Government “(Ministerio de Ciencia e Innovación)” through “Knowledge generation projects” [PID2021-125447OB-I00] and through “Strategic projects oriented to the ecological and digital transition” [TED2021-129991B-C31], by the “Xunta de Galicia “(Consellería de Cultura, Educación, Formación Profesional y Universidades)” through “Grants for the consolidation and structuring of competitive research units of the Galician University System: Competitive reference group” [ED431C 2022/06], by Portuguese Government “(Ministério da Educação e Ciência - Fundação para a Ciência e a Tecnologia (FCT) )” through projects [UIDB/00481/2020] and [UIDP/00481/ 2020] and by Portuguese Government “(Centro Portugal Regional Operational Program (Centro2020))” under the PORTUGAL 2020 Partnership Agreement, with the European Regional Development Fund through project [CENTRO-01-0145-FEDER-022083]., Xunta de Galicia; ED431C 2022/06, Portugal. Fundação para a Ciência e a Tecnologia; UIDB/00481/2020, Portugal. Fundação para a Ciência e a Tecnologia; UIDP/00481/2020, Portugal. Centro de Tecnologia Mecânica e Automação; CENTRO-01-0145-FEDER-022083