Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: A comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2R), the Regione Autonoma della Sardegna projectCRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

  • Luna, Julio
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila
  • Serra-Prat, María
  • Hissel, Daniel
In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), the LABEX ACTION (ref. ANR-11-LABX-01-01) and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed parameter model-based control of water activity and concentration of reactants in a polymer electrolyte membrane fuel cell

  • Sarmiento-Carnevali, María Laura
  • Serra-Prat, María
  • Batlle, Carles
Water management is still a key challenge for optimal performance and durability of polymer electrolyte membrane (PEM) fuel cells. Water levels along the channel in a PEM fuel cell present important spatial variations that should be taken into account to avoid both local flooding and local drying. In this work, a decentralised model predictive control scheme is designed to maintain the water activity on both anode and cathode sides of the PEM at appropriate levels. The proposed strategy tackles the accumulation of liquid water on the surface of the catalyst layers, and the possibility of local drying, by controlling observed water activity spatial profiles. Classic PEM fuel cell issues like reactant starvation are also considered. High control performance is achieved. The strategy is applied to a validated distributed parameter PEM fuel cell model. Results show increased cell power density in comparison to non-spatial control strategies., This work was partially funded by Spanish MEC-FPU [grant number AP-2010-3969]; and the Spanish national project MICAPEM (DPI2015-69286-C3-2-R, MINECO/FEDER)., Peer Reviewed