Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 77
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Módulo didáctico para la realización de experiencias de control no lineal

  • Lampón Diestre, Cristina
  • Costa-Castelló, R.
  • Dormido-Canto, Sebastián
[Resumen] En este trabajo se presenta un modelo analógico que puede ser utilizado para la realización de prácticas experimentales de control no lineal. El módulo permite incorporar no linealidades estáticas a sistemas ya existentes. El trabajo presenta la estructura, los componentes y un ejemplo de uso de este dispositivo., Este trabajo ha sido parcialmente financiado por los proyectos DPI2012-31303 y DPI2015-69286-C3-2-R (MINECO/FEDER) a y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

MPC como estrategia de gestión energética para un vehículo híbrido eléctrico

  • Carignano, Mauro Guido
  • Feroldi, Diego
  • Nigro, Norberto
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta la formulación y aplicación de una estrategia de gestión energética (EMS) para un vehículo eléctrico (HEV) basada en Control Predictivo (MPC). Específicamente, se presenta una formulación no lineal variante en el tiempo. El problema de optimización en el horizonte de predicción se resuelve utilizando programación dinámica. Los resultados obtenidos son comparados con las estrategias de gestión más reconocidas en la literatura, incluyendo la solución óptima. Los resultados en términos del consumo de combustible y del uso de la batería no muestran ninguna ventaja con implementación de MPC., Este trabajo ha sido parcialmente financiado por los proyectos DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (Agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Una estrategia de control mediante observadores para la temperatura en edificio de oficinas

  • Mascaró Palliser, Rubén
  • Costa-Castelló, R.
  • Álvarez, José Domingo
[Resumen] En este trabajo se presenta un modelo térmico de una habitación basado en primeros principios junto con el modelo térmico de las paredes que la conforman. Ambos modelos permiten formular el modelo parametrizable de un edificio con independencia del número de habitaciones que tenga. Además, se presentan resultados utilizando el modelo de un sistema de control basado en realimentación de estados que ha sido diseñado tomando como referencia las técnicas de control LQR. El sistema de control utiliza un observador basado en un filtro de Kalman que permita estimar la temperatura de todas las paredes del edificio, de esta manera, una futura implementación del sistema de control en un edificio real permitiría un ahorro considerable en lo tocante a la red de sensores que éste necesitaría para su funcionamiento., Este trabajado ha sido parcialmente financiado con las becas de colaboración del MEC, los proyectos DPI2015-69286-C3-2-R, DPI2014-56364-C2-1-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya). José Domingo Álvarez Hervás pertenece al programa del MEC `Ramón y Cajal' cofinanciado por la fundación social Europea, Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Prácticas experimentales de control digital con elementos de bajo coste

  • Izquierdo Borràs, Adolf
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta un entorno de bajo coste, compuesto por una placa Arduino y un circuito analógico, para su uso en prácticas de control digital. Se describe el entorno completo (tanto software como hardware), unas prácticas propuestos y se muestran algunos resultados experimentales., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Librería Java para análisis y simulación de sistemas lineales

  • Blanch Costa, Jordi
  • Costa-Castelló, R.
[Resumen] Este proyecto presenta el diseño, implementación y algunos ejemplos de uso de una librería JAVA pensada para el análisis y simulación de sistemas lineales. Se ha diseñado pensando en que sea fácilmente integrable con Easy Java Simulations. El uso combinado de ambas herramientas facilita el desarrollo de laboratorios virtuales y remotos., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control adaptativo por modelo de referencia para un inversor basado en LCL con síntesis de controlador mínima

  • Larco Barros, Ciro
  • Costa-Castelló, R.
  • Olm, Josep M.
[Resumen] Un Control Adaptativo por Modelo de Referencia (MRAC) con Síntesis de Controlador Mínima (MCS), es desarrollado con el objetivo de controlar un Inversor monofásico basado en un Filtro LCL conectado a la Red Eléctrica y adaptar el inductor de la red, que es un parámetro desconocido y que genera incertidumbre, manteniendo las prestaciones y la robustez del sistema. Para ello primero se revisara el algoritmo de MCS y en función de este, se muestran todos los pasos a seguir y el desarrollo de los componentes necesarios para el funcionamiento de MCS en tiempo continuo. Se desarrolla un modelo de simulación promediado y se presentan los resultados obtenidos., Este trabajo ha sido realizado gracias al apoyo de la Secretaría Nacional de Educación Superior, Ciencia y Tecnología e Innovación del Ecuador (SENESCYT), a la Universidad de Cuenca, y a los proyectos DPI2013-41224-P y DPI2015-69286-C3-2-R (MINECO/FEDER) y 2014 SGR 267 de la agencia AGAUR de la Generalitat de Catalunya, Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Model-based analysis for the thermal management of open-cathode proton exchange membrane fuel cell systems concerning efficiency and stability

  • Strahl, Stephan
  • Costa Castelló, Ramon
In this work we present a dynamic, control-oriented, concentrated parameter model of an open-cathode proton exchange membrane fuel cell system for the study of stability and efficiency improvement with respect to thermal management. The system model consists of two dynamic states which are the fuel cell temperature and the liquid water saturation in the cathode catalyst layer. The control action of the system is the inlet air velocity of the cathode air flow manifold, set by the cooling fan, and the system output is the stack voltage. From the model we derive the equilibrium points and eigenvalues within a set of operating conditions and subsequently discuss stability and the possibility of efficiency improvement. The model confirms the existence of a temperature-dependent maximum power in the moderate temperature region. The stability analysis shows that the maximum power line decomposes the phase plane in two parts, namely stable and unstable equilibrium points. The model is capable of predicting the temperature of a stable steady-state voltage maximum and the simulation results serve for the design of optimal thermal management strategies., This work is partially funded by the National Project MICINN DPI2015-69286-C3-2-R MINECO/FEDER and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado a la 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON), celebrada en Florencia (Italia) del 23 al 26 de octubre de 2016., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., This work has been partially funded by the MINECO/FEDER project DPI2015-69286-C3-2-R, the Regione Autonoma della Sardegna project CRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: A comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2R), the Regione Autonoma della Sardegna projectCRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

  • Luna, Julio
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila
  • Serra-Prat, María
  • Hissel, Daniel
In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), the LABEX ACTION (ref. ANR-11-LABX-01-01) and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Strahl, Stephan
  • Costa Castelló, Ramon
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model., This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Ramos, German A.
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., This work was partially supported by the spanish Ministerio de Educacion project DPI2015-69286-C3-2-R (MINECO/FEDER) and the catalan AGAUR project 2014 SGR 267., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of metal hydride properties in hydrogen absorption through 2D-axisymmetric modeling and experimental testing in storage canisters

  • Busqué Somacarrera, Raquel
  • Torres, Ricardo
  • Grau, Joan
  • Roda, Vicente
  • Husar, Attila
A two-dimensional axisymmetric model is developed to study the hydrogen absorption reaction and resultant mass and heat transport phenomena inside a metal hydride canister. The model is compared against published literature and experimental data. Experimental tests are performed on an in-house fabricated setup using different cooling scenarios. An extensive study on the effects of the metal properties on charging performance is carried out through non-destructive testing (NDT). Results show that the properties that most influence the charging performance are: absorption rate constant (C), activation energy (E) and thermal conductivity (k). A Higher porosity (ε) reduces charging time and amount of hydrogen stored while a higher cooling level produces a faster charging process. These results can be used to select metal hydride materials but also to estimate the metal hydride internal state and the process can be used for future evaluation of metal hydride degradation., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), and the Spanish Council for Scientific Investigations JAE-INTRO2014., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed parameter model-based control of water activity and concentration of reactants in a polymer electrolyte membrane fuel cell

  • Sarmiento-Carnevali, María Laura
  • Serra-Prat, María
  • Batlle, Carles
Water management is still a key challenge for optimal performance and durability of polymer electrolyte membrane (PEM) fuel cells. Water levels along the channel in a PEM fuel cell present important spatial variations that should be taken into account to avoid both local flooding and local drying. In this work, a decentralised model predictive control scheme is designed to maintain the water activity on both anode and cathode sides of the PEM at appropriate levels. The proposed strategy tackles the accumulation of liquid water on the surface of the catalyst layers, and the possibility of local drying, by controlling observed water activity spatial profiles. Classic PEM fuel cell issues like reactant starvation are also considered. High control performance is achieved. The strategy is applied to a validated distributed parameter PEM fuel cell model. Results show increased cell power density in comparison to non-spatial control strategies., This work was partially funded by Spanish MEC-FPU [grant number AP-2010-3969]; and the Spanish national project MICAPEM (DPI2015-69286-C3-2-R, MINECO/FEDER)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Model predictive control for ethanol steam reformers with membrane separation

  • Serra-Prat, María
  • Ocampo-Martínez, Carlos
  • Li, Mingming
  • Llorca, Jordi
This paper focuses on the dynamic modelling and the predictive control of an ethanol steam reformer (ESR) with Pd[sbnd]Ag membrane separation stage for the generation of pure hydrogen. Hydrogen purity necessary to feed a proton exchange membrane fuel cell (PEMFC) is required. A non-linear dynamic model of the ESR is developed together with a procedure for adjusting the model parameters in order to fit a bank of experimental data of a real ESR system. Static and dynamic analysis of the non-linear ESR model is presented. From this non-linear model, a linear, reduced order and discretised model is derived and a model predictive controller (LMPC) is designed for the ESR system. Control objectives are pure hydrogen flowrate tracking and ethanol inlet minimization. Comparisons between the non-linear and linear models are carried out to determine the control constraints. Finally, simulation results for the implemented LMPC controller are presented and discussed., This paper has been partially supported by Spanish research projects. DPI2015-69286-C3-2-R, MINECO/FEDER and ENE2015-63969-R, MINECO/FEDER. Mingming Li has been supported by the China Scholarship Council (CSC). Jordi Llorca is Serra Húnter Fellow and is grateful to ICREA Academia program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the efficiency and lifetime of a proton exchange membrane fuel cell using nonlinear model-predictive control with nonlinear observation

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
The aim of this research is to develop and test in a simulation environment an advanced model-based control solution for a proton exchange membrane fuel cell (PEMFC) system. A nonlinear model-predictive control (NMPC) strategy is proposed to maximize the active catalytic surface area at the cathode catalyst layer to increase the available reaction area of the stack and to avoid starvation at the catalyst sites. The PEMFC stack model includes a spatial discretization that permits the control strategy to take into account the internal conditions of the system. These internal states are estimated and fed to the NMPC via a nonlinear distributed parameters observer. The air-fed cathode of the PEMFC simulation model includes a two-phase water model for better representation of the stack voltage. The stack temperature is regulated through the use of an active cooling system. The control strategy is evaluated in an automotive application using a driving cycle based on the New European Driving Cycle profile as the case study., This work has been partially supported by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), the Regione Autonoma della Sardegna project CRP-7733 and the Fuel Cells and Hydrogen 2 Joint Undertaking under grant agreement No 735969. This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation programme and Hydrogen Europe and N.ERGHY, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iterative learning control experimental results in twin-rotor device

  • Mascaró Palliser, R.
  • Costa Castelló, Ramon
  • Ramos, German A.
This paper presents the results of applying the Iterative Learning Control algorithms to a Twin-Rotor Multiple-Input Multiple-Output System (TRMS) in order to achieve high performance in repetitive tracking of trajectories. The plant, which is similar to a prototype of helicopter, is characterized by its highly nonlinear and cross-coupled dynamics. In the first phase, the system is modelled using the Lagrangian approach and combining theoretical and experimental results. Thereafter, a hierarchical control architecture which combines a baseline feedback controller with an Iterative Learning Control algorithm is developed. Finally, the responses of the real device and a complete analysis of the learning behaviour are exposed., This work has been supported by Project DPI2015-69286-C3-2-R of Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy management strategy for fuel cell-supercapacitor hybrid vehicles based on prediction of energy demand

  • Carignano, Mauro G.
  • Costa Castelló, Ramon
  • Roda, Vicente
  • Nigro, Norberto M.
  • Junco, Sergio
  • Feroldi, Diego
Offering high efficiency and producing zero emissions Fuel Cells (FCs) represent an excellent alternative to internal combustion engines for powering vehicles to alleviate the growing pollution in urban environments. Due to inherent limitations of FCs which lead to slow transient response, FC-based vehicles incorporate an energy storage system to cover the fast power variations. This paper considers a FC/supercapacitor platform that configures a hard constrained powertrain providing an adverse scenario for the energy management strategy (EMS) in terms of fuel economy and drivability. Focusing on palliating this problem, this paper presents a novel EMS based on the estimation of short-term future energy demand and aiming at maintaining the state of energy of the supercapacitor between two limits, which are computed online. Such limits are designed to prevent active constraint situations of both FC and supercapacitor, avoiding the use of friction brakes and situations of non-power compliance in a short future horizon. Simulation and experimentation in a case study corresponding to a hybrid electric bus show improvements on hydrogen consumption and power compliance compared to the widely reported Equivalent Consumption Minimization Strategy. Also, the comparison with the optimal strategy via Dynamic Programming shows a room for improvement to the real-time strategies., This work was supported by Bec.Ar, Programa de Becas de Formación en el Exterior en Ciencia y Tecnología of Ministerio de Modernización of Argentina; by the project MINECO/FEDER of the Ministerio de Educación de España [grant number DPI2015-69286-C3-2-R]; and by AGAUR agency of the Generalitat de Catalunya [grant number 2014 SGR 267]. The first author also wishes to thank CONICET, Consejo Nacional de Investigaciones Científicas y Técnicas for its financial support through the PhD fellowship; and Escuela de Ingeniería Mecánica of Universidad Nacional de Rosario (EIM-FCEIA-UNR) for providing the workspace., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Teaching, analyzing, designing and interactively simulating sliding mode control

  • Costa Castelló, Ramon
  • Carrero, Niliana
  • Dormido, Sebastián
  • Fossas-Colet, Enric
This paper introduces an interactive methodology to analize, design, and simulate sliding model controllers for R, linear systems. This paper reviews sliding mode basic concepts and design methodologies and describes an interactive tool which has been developed to support teaching in this field. The tool helps students by generating a nice graphical and interactive display of most relevant concepts. This fact can be used so that students build their own intuition about the role of different parameters in a sliding mode controller. Described application has been coded with Sysquake using an event-driven solver technique. The Sysquake allows using precise integration methods in real time and handling interactivity in a simple manner., This work was supported in part by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under Project DPI2012-31303 and Project DPI2015-69286-C3-2-R, in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modeling and control of HTPEMFC based combined heat and power for confort control

  • Martínez Molina, Pau
  • Serra-Prat, María
  • Costa Castelló, Ramon
Trabajo presentado a la 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), celebrada en Limassol (Chipre) del 12 al 15 de septiembre de 2017., In this work the dynamic model of a domestic heating system is described. The heating system is based on a High Temperature PEM Fuel Cell. The model corresponds to a home placed in the city of Barcelona. The set of equations describing its behavior, the implementation in MATLAB/Simulink and some preliminary results for the control system are described., This work was partially supported by the spanish Ministerio de Educacion project DPI2015-69286-C3-2-R (MINECO/FEDER) and the catalan AGAUR project 2014 SGR 267., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Luna, Julio
  • Costa Castelló, Ramon
Trabajo presentado a las XXXVIII Jornadas de Automática (JJAA), celebradas en Gijón del 6 al 8 de septiembre de 2017., En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS., Este trabajo ha sido parcialmente financiado por los proyectos MINECO/FEDER DPI2015-69286-C3-2-R y INN-BALANCE H2020-JTI-FCH-2016-1-735969., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined heat and power using high temperature proton exchange membrane fuel cells for comfort applications

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle, Carles
Trabajo presentado al XV Simposio CEA de Ingeniería de Control: "Control total de planta / Plant-Wide Control", celebrado en Salamanca del 9 al 10 de febrero de 2017., Global concerns about nowadays' energy shortage problems as well as climate change eects have encouraged alternatives to classical energy sources such as fossil fuels and nuclear power plants. In this context, combined heat and power is presented as a useful option due to its ability of generating both electrical and thermal energy more eciently than conventional methods. Regarding this, high temperature proton exchange membrane fuel cells are not only a reliable way of implementing combined heat and power systems, but also a better solution in terms of energy conversion eciency and greenhouse gases emissions reduction. Therefore, high temperature proton exchange membrane fuel cells are being installed around the world and policies encouraging its utilisation are being promoted., This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental thermal model of a high temperature fuel cell stack

  • Serri, Flavia
  • Serra-Prat, María
  • Costa Castelló, Ramon
Trabajo presentado al 6th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries (Hyceltec), celebrado en Oporto (Portugal) del 19 al 23 de junio de 2017., HT- PEM fuel cells (operating termperature >100°C), in comparison to PEM fuel cells: have better reaction kinetics; have higher CO tolerance; do not present problems with liquid water formation; and can be used as a CH&P generator. The main objective of this work is to obtain a thermal model of a HT-PEMFC based on experimental data. The model is aimed at the design of temperature controllers. Second order transfer functions have shown to achieve fittings to the experimental data greater than 87% both for closed and open heat management openings., This work acknowledges the Spanish project with reference DPI2015-69286-C3-2-R, MINECO/FEDER., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
Trabajo presentado a la Conference on Control Technology and Applications, celebrada en Hawai (US) del 27 al 30 de agosto de 2017., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system¿s areas., This work was supported by the partnership between Keio University and UPC-ETSEIB. This work has been supported by the project DPI2015-69286-C3-2-R of the Spanish Ministerio de Educacion de España and 2014 SGR 267 of the AGAUR agency of the Generalitat de Catalunya., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Modeling and control of PEM fuel cells

  • Sarmiento-Carnevali, María Laura
Programa de Doctorat: Automàtica, Robòtica i Visió., [EN]: In recent years, the PEM fuel cell technology has been incorporated to the R&D plans of many key companies in the automotive, stationary power and portable electronics sectors. However, despite current developments, the technology is not mature enough to be significantly introduced into the energy market. Performance, durability and cost are the key challenges. The performance and durability of PEM fuel cells significantly depend on variations in the concentrations of hydrogen and oxygen in the gas channels, water activity in the catalyst layers and other backing layers, water content in the polymer electrolyte membrane, as well as temperature, among other variables. Such variables exhibit internal spatial dependence in the direction of the fuel and air streams of the anode and cathode. Highly non-uniform spatial distributions in PEM fuel cells result in local over-heating, cell flooding, accelerated ageing, and lower power output than expected. Despite the importance of spatial variations of certain variables in PEM fuel cells, not many works available in the literature target the control of spatial profiles. Most controloriented designs use lumped-parameter models because of their simplicity and convenience for controller performance. In contrast, this Doctoral Thesis targets the distributed parameter modelling and control of PEM fuel cells. In the modelling part, the research addresses the detailed development of a non-linear distributed parameter model of a single PEM fuel cell, which incorporates the effects of spatial variations of variables that are relevant to its proper performance. The model is first used to analyse important cell internal spatial profiles, and it is later simplified in order to decrease its computational complexity and make it suitable for control purposes. In this task, two different model order reduction techniques are applied and compared. The purpose of the control part is to tackle water management and supply of reactants, which are two major PEM fuel cell operation challenges with important degradation consequences. In this part of the Thesis, two decentralised control strategies based on distributed parameter model predictive controllers are designed, implemented and analysed via simulation environment. State observers are also designed to estimate internal unmeasurable spatial profiles necessary for the control action. The aim of the first strategy is to monitor and control observed water activity spatial profiles on both sides of the membrane to appropriate levels. These target values are carefully chosen to combine proper membrane, catalyst layer and gas diffusion layer humidification, whilst the rate of accumulation of excess liquid water is reduced. The key objective of this approach is to decrease the frequency of water removal actions that cause disruption in the power supplied by the cell, increased parasitic losses and reduction of cell efficiency. The second strategy is a variation of the previous water activity control strategy, which includes the control of spatial distribution of gases in the fuel and air channels. This integrated solution aims to avoid starvation of reactants by controlling corresponding concentration spatial profiles. This approach is intended to prevent PEM fuel cell degradation due to corrosion mechanisms, and thermal stress caused by the consequences of reactant starvation. The results show increased fuel cell performance considering the spatial control approaches proposed in this Thesis, in comparison to non-spatial control strategies. Moreover, the decentralised feature of the control scheme, combined with the use of order-reduced models within the model predictive controllers, has important impact on the overall control performance., [ES]: A pesar de los avances actuales, la tecnología de celdas de hidrógeno tipo PEM no está suficientemente preparada para ser ampliamente introducida en el mercado energético. Rendimiento, durabilidad y costo son los mayores retos. El rendimiento y la durabilidad de las celdas dependen significativamente de las variaciones en las concentraciones de hidrógeno y oxígeno en los canales de alimentación de gases, la humedad relativa en las capas catalizadoras, el contenido de agua de la membrana polimérica, así como la temperatura, entre otras variables. Dichas variables presentan dependencia espacial interna en la dirección del flujo de gases del ánodo y del cátodo. Distribuciones espaciales altamente no uniformes en algunas variables de la celda resultan en sobrecalentamiento local, inundación, degradación acelerada y menor potencia de la requerida. Muy pocos trabajos disponibles en la literatura se ocupan del control de perfiles espaciales. La mayoría de los diseños orientados a control usan modelos de parámetros concentrados que ignoran la dependencia espacial de variables internas de la celda, debido a la complejidad que añaden al funcionamiento de controladores. En contraste, esta Tesis Doctoral trata la modelización y control de parámetros distribuidos en las celdas de hidrógeno tipo PEM. En la parte de modelización, esta tesis presenta el desarrollo detallado de un modelo no lineal de parámetros distribuidos para una sola celda, el cual incorpora las variaciones espaciales de todas las variables que son relevantes para su correcto funcionamiento. El modelo se usa primero para analizar importantes perfiles espaciales internos, y luego se simplifica para reducir su complejidad computacional y adecuarlo a propósitos de control. En esta tarea se usan y se comparan dos técnicas de reducción de orden de modelos. El propósito de la parte de control es abordar la gestión de agua y el suministro de reactantes, que son dos grandes retos en el funcionamiento de las celdas con importantes consecuencias para su vida útil. En esta parte de la tesis, dos estrategias de control descentralizadas, basadas en controladores predictivos de modelos de referencia con parámetros distribuidos, son diseñadas, implementadas y analizadas en un entorno de simulación. Estas tareas incluyen también el diseño de observadores de estado que estiman los perfiles espaciales internos necesarios para la acción de control. El objetivo de la primera estrategia es monitorear y controlar perfiles espaciales observados de la humedad relativa en las capas catalizadoras para mantenerlos en niveles apropiados. Estos niveles son escogidos cuidadosamente para combinar la correcta humidificación de la membrana y las capas catalizadoras, reduciendo la velocidad de acumulación de agua líquida. El objetivo clave de este enfoque es disminuir la frecuencia de las acciones de remoción de agua dentro de la celda, ya que estas acciones causan interrupción en la potencia suministrada, aumento de las cargas parasitarias y disminución de la eficiencia. La segunda estrategia es una variación de la estrategia anterior que considera adicionalmente el control de la distribución espacial de los gases en los canales del ánodo y cátodo. Esta solución integrada tiene como objetivo evitar la ausencia local de reactantes mediante el control de perfiles espaciales de concentración de gases. Este enfoque pretende prevenir la degradación de las celdas debido a mecanismos de corrosión. Los resultados muestran un mayor rendimiento de la celda considerando los enfoques de control de perfiles espaciales propuestos en esta tesis, en comparación con técnicas de control que ignoran dichos perfiles. Además, la característica descentralizada de los esquemas de control, combinada con el uso de modelos reducidos dentro de los controladores predictivos, tiene un impacto positivo importante en el rendimiento general del control., This work was partially funded by Spanish MEC-FPU Grant number AP-2010-3969, the Spanish national projects MESPEM (DPI2011-25649) and MICAPEM (DPI2015-69286-C3-2-R, MINECO/FEDER) and the European project PUMA-MIND (FP7-FCH-JU-2011-1- 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reset control of boost converters

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Trabajo presentado en la Annual American Control Conference (ACC), celebrada en Milwaukee (WI, USA), del 27 al 29 de junio de 2018, The goal of this work is to apply the framework of reset systems, in particular PI+CI controllers, in the controller design for power converters. While the PI+CI controller has been applied in several industrial applications, the application of such controllers in fast electrical systems especially power electronic converters appears to be new. The main motivations for this proposal are performance superiority of these controllers and the ability to produce a fast flat response without any overshoot for a step input. Another factor that influenced the use of such controller is the relatively simple design equations, which enables plug and play capability. The flat responses are highly interesting from the perspective of power converters especially when they are connected to power grids., This work was partially supported, including FEDER co-funding, by the Spanish Ministerio de Educacin project DPI2015-69286-C3-2-R (MINECO/FEDER), project DPI2013-47100-C2-1-P, and project DPI2016- 79278-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy management strategy for a bioethanol isolated hybrid system: Simulations and experiments

  • Rullo, Pablo Gabriel
  • Costa Castelló, Ramon
  • Roda, Vicente
  • Feroldi, Diego
Renewable energy sources have significant advantages both from the environmental and the economic point of view. Additionally, renewable energy sources can contribute significantly to the development of isolated areas that currently have no connection to the electricity supply network. In order to make efficient use of these energy sources, it is necessary to develop appropriate energy management strategies. This work presents an energy management strategy for an isolated hybrid renewable energy system with hydrogen production from bioethanol reforming. The system is based on wind-solar energy, batteries and a bioethanol reformer, which produces hydrogen to feed a fuel cell system. Bioethanol can contribute to the development of isolated areas with surplus agricultural production, which can be used to produce bioethanol. The energy management strategy takes the form of a state machine and tries to maximize autonomy time while minimizing recharging time. The proposed rule-based strategy has been validated both by simulation and experimentally in a scale laboratory station. Both tests have shown the viability of the proposed strategy complying with the specifications imposed and a good agreement between experimental and simulation results, This work has been partially funded by the Spanish national project MICAPEM(Ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Argentine national project PICT2014-1607. This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAURof Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composite PID control with unknown dynamics estimator for rotomagnet plant

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Although PID control has been widely used in practical engineering, its ability to reject external disturbance and to handle severe nonlinearities should be further enhanced. In this paper, we present a simple robust unknown dynamics estimation, which can be easily incorporated into PID control to achieve satisfactory control performance for a rotomagnet plant subject to period disturbance. The use of this estimator together with PID control leads to a feedforward like composite control framework. Unlike other estimators, only low-pass filter operations on the input and output and simple algebraic operations are needed to construct our estimator, while exponential convergence can be guaranteed. Numerical simulations are given to show the validity of the proposed estimator and composite PID control., This work was supported by the National Natural Science Foundation of China (NSFC) under grant 61573174 and the spanish Ministerio de Educacion project DPI2015- 69286-C3-2-R (MINECO/FEDER). This work is supported by the Spanish State Research Agency through the Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grid voltage regulation using a reset PI+CI controller for energy storage systems

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Hybrid controllers are capable of improved performance over their linear counterparts. In particular, reset controllers like the PI+CI are capable of fast flat response for lag dominant plants. Grid connected power converters especially interfacing energy storage systems to grids are required to have fast response to varying load demands to ensure minimum variation in grid parameters. Application of PI+CI controllers in such systems can improve their performance. In this work the improvement brought about by use of PI+CI controller employed for energy storage system power converters is highlighted by comparing it with PI controller based system under load variations. A DC microgrid with Fuel cell-supercapacitor based storage elements are considered here. The design criteria and simulation results are presented here., This work was partially supported, including FEDER co-funding, by the Spanish Ministerio de Educacin project DPI2015-69286-C3-2-R (MINECO/FEDER), project DPI2013-47100-C2-1-P, and project DPI2016- 79278-C2-1-R. This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mathematical modeling, numerical simulation and experimental comparison of the desorption process in a metal hydride hydrogen storage system

  • Busqué Somacarrera, Raquel
  • Torres, Ricardo
  • Grau, Joan
  • Roda, Vicente
  • Husar, Attila
A two-dimensional axisymmetric model is developed to study the hydrogen desorption reaction and its subsequent discharge in a metal hydride canister. Experimental tests are performed on an in-house fabricated setup. An extensive study on the effects of the metal properties and boundary conditions on discharging performance is carried out through non-destructive testing (NDT). Results show that the desorption process is more effective if the activation energy for desorption (Ed) and the reaction enthalpy (ΔH) decrease, and when the desorption rate coefficient (Cd) and the external convection heat transfer coefficient when the bottle is being heated (h) increase. Furthermore, porosity (ε) can be useful for the design of hydrogen storage systems, with a trade-off between charge/discharge time and storage capacity. Numerical and experimental results are compared achieving a good agreement. These results can be used to select metal hydride materials and also for the future evaluation of metal hydride degradation., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Design of an ejector for a hydrogen recirculation system for a PEM fuel cell

  • Corbella Coll, Xavier
  • Roda, Vicente
  • Torres, Ricardo
  • Husar, Attila
Trabajo presentado en la European Hydrogen Energy Conference, celebrada en Málaga, del 14 al 16 de marzo de 2018, One of the issues that need to be addressed in order to improve the durability and efficiency of a PEM fuel cell system is the management of the hydrogen feeding procedure. It has been demonstrated these aspects are improved when a hydrogen recirculation systems are used [1]. In this work, an ejector has been designed and manufactured and implemented in an experimental PEM fuel cell Test Station to analyze how ejector based hydrogen recirculation systems affect PEM fuel cells. The proper design of an ejector must take into account several geometrical parameters that can only be studied using Computational Fluid Dynamics (CFD). Thus, a CFD model has been implemented with an axisymmetric geometry and the standard k-ε model to approximate the Favre-averaged Navier-Stokes equations. An experimental ejector has been used to validate the CFD model, obtaining very good agreement between experimental results and the model. Finally, a parametric study has been done to find the optimum geometrical parameters for the ejector to be implemented in the Test Station., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of Energy Management in a Fuel Cell/Battery Hybrid Vehicle

  • Carignano, Mauro G.
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Valiño García, Luis
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
The energy management strategy plays a major role in hybrid platforms powered by fuel cells (FCs) and batteries. This paper presents an assessment of energy management focused on fuel economy and battery degradation. Particularly, a proposed heuristic strategy and the widely known equivalent consumption minimization strategy are compared with the optimal solution obtained offline via dynamic programming. The case study is based on a real FC hybrid vehicle. Accordingly, the powertrain model of the vehicle used for the simulations is validated experimentally, and the profile of the power demand is measured from the real application. The results show that the proposed strategy offers the same performance as the equivalent consumption minimization strategy when the battery degradation is prioritized, and in comparison with the optimal off-line solution, it can be seen that there is still margin for improvement in terms of battery degradation., This work was supported in part by the Scholarship Program BECAR of Ministerio de Modernizacion of Argentina, under Project DPI2015-69286-C3-1-R and Project DPI2015-69286-C3-2-R (MINECO/FEDER) of the Spanish Government, in part by the European Commission H2020 through the Fuel Cell and Hydrogen Joint Undertaking Project under Project INN-BALANCE 735969 and Project REWIND LIFE13 ENV/ES/000280, in part by the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group of LIFTEC under Grant T01_17R, in part by the Spanish State Research Agency through the Marí de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal sizing of storage elements for a vehicle based on fuel cells, supercapacitors, and batteries

  • Sampietro, José Luis
  • Puig, Vicenç
  • Costa Castelló, Ramon
To achieve a vehicle-efficient energy management system, an architecture composed of a PEM fuel cell as the main energy source and a hybrid storage system based on battery banks and supercapacitors is proposed. This paper introduces a methodology for the optimal component sizing aiming at minimizing the total cost, achieving a cheaper system that can achieve the requirements of the speed profiles. The chosen vehicle is an urban transport bus, which must meet the Buenos Aires Driving Cycle, and the Manhattan Driving Cycle. The combination of batteries and supercapacitors allows a better response to the vehicle’s power demand, since it combines the high energy density of the batteries with the high power density of the supercapacitors, allowing the best absorption of energy coming from braking. In this way, we address the rapid changes in power without reducing the global efficiency of the system. Optimum use of storage systems and fuel cell is analyzed through dynamic programming., This work has been partially funded by the Spanish national projects MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and SCAV (ref. DPI2017-88403-R MINECO/FEDER). This work is supported by the Spanish State Research Agencythrough the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Trabajo presentado en el 18th European Control Conference (ECC), celebrado en Nápoles (Italia), del 25 al 28 de junio de 2019, Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells., This work was partially funded by the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially supported by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007). This work has been done with the partial support of ACCIO (Operational Program FEDER Catalunya 2014-2020) through the ´ REFER project (COMRDI15-1-0036-11)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Ramos, German A.
Trabajo presentado en la 20th IEEE International Conference on Industrial Technology, celebrada en Melbourne (Australia) del 13 al 15 de febrero de 2019, Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H¿ and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement No 675318 (INCITE). This work has been partially funded by the MINECO/FEDER project DPI2015-69286-C3-2-R. This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reset control for DC-DC converters: an experimental application

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Government of Spain under Project DPI2016-79278-C2-1-R, MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle, Carles
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modelling of solid oxide electrolizer and hydrogen leak estimation

  • Cifuentes López, Alejandro
  • Husar, Attila
  • Roda, Vicente
  • Morales, M.
  • Bernadet, L.
  • Torrell, M.
  • Serra-Prat, María
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Solid Oxide Elecyrolizers (SOEC) are electrochemical devises that produce hydrogen from water using the energy of an electric power source. SOEC operate at high temperatures (around 800ºC) and have efficiencies around 53% [1]. One of the most interesting scenarios of SOEC use is the storage of energy in hydrogen form when renewable power sources do not match the load. Because of this, it is important to study the dynamic behavior of SOEC systems in order to know their ability to adapt to changing power profiles. Different works describe SOEC models in the literature, as reviewed in [2], but time dependent models are scarse [3] and very few of the models are experimentally validated. This work presents a dy-namic model of a SOEC implemented in MATLAB Simulink and its match with experimental data. One important issue in SOEC stacks is hydrogen leak, which aggravates with ageing and is mostly caused by the high operating temperatures. The analysis of the experimental data of this work suggested hydrogen leak. Based on the SOEC thermal model, a methodology to quantify the flow of hydrogen that is leaked out is proposed and applied to the experimental system., This work was done with the support of ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the COSIN project (ref. COMRDI15-1-0037-06), the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to the Institut de Robòtica i Informàtica Industrial (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM, High-gain dead-zone observer for PEM fuel cells

  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en las XL Jornadas de Automática: Modelado, Simulación y Optimización, celebradas en Ferrol (España), del 4 al 6 de septiembre de 2019, [ES] En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., [EN] In this work an observer that estimates the cathode catalyst layer’s liquid water saturation of an open-cathode PEM fuel cell is presented. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone. In this work, it is shown that, in the absence of noise, the proposed observer presents a similar performance than its non deadzone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., Este proyecto se ha financiado parcialmente por el proyecto nacional Español MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a través de la subvención del grupo Advanced Control Systems (SAC) (2017 SGR 482). Este trabajo se ha realizado con el apoyo de ACCIÓ (Operational Program FEDER Catalunya 2014-2020) a través de REFER project (COMRDI15-1-0036-11).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On teaching digital control systems in a generic engineering degree

  • Lerma, Eneko
  • Costa Castelló, Ramon
  • Griñó, Robert
  • Sanchis, Carlos
  • Dormido, Sebastián
Trabajo presentado en el 12th IFAC Symposium on Advances in Control Education ACE , celebrado en Philadelphia, Pennsylvania (Estados Unidos), del 7 al 9 de julio de 2019, In this work, the subject of digital control taught in a generic engineering degree is described. In particular, the contents of the course, the experimental environment and the interactive tools used in teaching are discussed. This work collects the teaching experience obtained during the past twenty years by the teaching team of this subject at the Barcelona School of Industrial Engineering of the Universitat Politecnica de Catalunya., The work of R. Costa-Castello was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2015-69286-C3-2-R and Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Generalitat de Catalunya through the Project 2017 SGR 482 and by the donation of Mathworks UPC-I-01523. The work of R. Griño was partially supported by the Government of Spain through the Agencia Estatal de Investigaci´on Project DPI2017-85404-P, by the Generalitat de Catalunya through the Project 2017 SGR 872 and by the donation of Mathworks UPC-I-01523. The work of E. Lerma was partially supported by the donation of Mathworks UPC-I-01523. The work of S. Dormido was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2017-84259-C2-2-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., This work was partially funded by the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, J. K.
  • Serra-Prat, María
  • Husar, Attila
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
Trabajo presentado en el 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design., This work was partially funded by ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11), the Spanish national project MICAPEM (ref. DPI2015- 69286- C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptive Estimation of Time-Varying Parameters with Application to Roto-Magnet Plant

  • Na, Jing
  • Xing, Yashan
  • Costa Castelló, Ramon
This paper presents an alternative adaptive parameter estimation framework for nonlinear systems with time-varying parameters. Unlike existing techniques that rely on the polynomial approximation of time-varying parameters, the proposed method can directly estimate the unknown time-varying parameters. Moreover, this paper proposes several new adaptive laws driven by the derived information of parameter estimation errors, which achieve faster convergence rate than conventional gradient descent algorithms. In particular, the exponential error convergence can be rigorously proved under the well-recognized persistent excitation condition. The robustness of the developed adaptive estimation schemes against bounded disturbances is also studied. Comparative simulation results reveal that the proposed approaches can achieve better estimation performance than several other estimation algorithms. Finally, the proposed parameter estimation methods are verified by conducting experiments based on a roto-magnet plant., This work was supported by the National Natural Science Foundation of China (NSFC) under grant 61573174, the Spanish Ministerio de Educación project DPI2015-69286-C3-2-R (MINECO/ FEDER), the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and the Chinese Scholarship Council (CSC) under rant 201808390007.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive estimation of time-varying parameters with application to roto-magnet plant

  • Na, Jing
  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents an alternative adaptive parameter estimation framework for nonlinear systems with time-varying parameters. Unlike existing techniques that rely on the polynomial approximation of time-varying parameters, the proposed method can directly estimate the unknown time-varying parameters. Moreover, this paper proposes several new adaptive laws driven by the derived information of parameter estimation errors, which achieve faster convergence rate than conventional gradient descent algorithms. In particular, the exponential error convergence can be rigorously proved under the well-recognized persistent excitation condition. The robustness of the developed adaptive estimation schemes against bounded disturbances is also studied. Comparative simulation results reveal that the proposed approaches can achieve better estimation performance than several other estimation algorithms. Finally, the proposed parameter estimation methods are verified by conducting experiments based on a roto-magnet plant., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing the efficiency and lifetime of a proton exchange membrane fuel cell using nonlinear model-predictive control with nonlinear observation

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The aim of this research is to develop and test in a simulation environment an advanced model-based control solution for a proton exchange membrane fuel cell (PEMFC) system. A nonlinear model-predictive control (NMPC) strategy is proposed to maximize the active catalytic surface area at the cathode catalyst layer to increase the available reaction area of the stack and to avoid starvation at the catalyst sites. The PEMFC stack model includes a spatial discretization that permits the control strategy to take into account the internal conditions of the system. These internal states are estimated and fed to the NMPC via a nonlinear distributed parameters observer. The air-fed cathode of the PEMFC simulation model includes a two-phase water model for better representation of the stack voltage. The stack temperature is regulated through the use of an active cooling system. The control strategy is evaluated in an automotive application using a driving cycle based on the New European Driving Cycle profile as the case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Identification of PEM fuel cells based on support vector regression and orthonormal bases

  • Feroldi, Diego Hernán
  • Gómez, Juan Carlos
  • Roda Serrat, Vicente
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Polymer Electrolyte Membrane Fuel Cells (PEMFC) are efficient devices that convert the chemical energy of the reactants in electricity. In this type of fuel cells, the performance of the air supply system is fundamental to improve their efficiency. An accurate mathematical model representing the air filling dynamics for a wide range of operating points is then necessary for control design and analysis. In this paper, a new Wiener model identification method based on Support Vector (SV) Regression and orthonormal bases is introduced and used to estimate a nonlinear dynamical model for the air supply system of a laboratory PEMFC from experimental data. The method is experimentally validated using a PEMFC system based on a ZB 8-cell stack with Nafion 115 membrane electrode assemblies, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Ramos Fuentes, German A.
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H8 and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Ramos Fuentes, German A.
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, Johanna Katharina
  • Serra, Maria|||0000-0002-9885-8093
  • Husar, Attila Peter|||0000-0001-8503-3837
Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Jing, Na
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM de cátodo abierto

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Premio al mejor trabajo en Ingeniería de Control presentado en las XL Jornadas de Automática, otorgado por el Comité Español de Automàtica, celebradas en Ferrol 2019, En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Peer Reviewed, Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Jing, Na
Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system’s areas., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An analysis of energy storage system interaction in a multi objective model predictive control based energy management in DC microgrid

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-deterministic generation from renewable sources have resulted in the incorporation energy storage systems in modern grids. Management of energy between different storage elements need to done optimally to ensure efficient operation of the grid. The intraday energy management problem is addressed in this work through an online model predictive control using multi objective optimisation. This work analyses the energy interaction among different storages when penalty weights in a multi objective optimisation problem is varied, in order to find an optimal scenario in terms of weight distribution. Different scenarios are identified and performance indices are proposed to achieve the same. The work also addresses implicitly the objective of minimising rate of degradation batteries. Simulation results are presented to aid in the analysis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Batlle Arnau, Carles|||0000-0002-6088-6187
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Luna Pacho, Julio Alberto
En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reset control for DC-DC converters: an experimental application

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Baños Torrico, Alfonso
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Jing, Na
Best Oral Communication Award for Young Authors, atorgat pel comitè científic HYCELTEC 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., Peer Reviewed, Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Strahl, Stephan
Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessment of Energy Management in a Fuel Cell/Battery Hybrid Vehicle

  • Carignano, M.
  • Roda, V.
  • Costa-Castello, R.
  • Valiño, L.
  • Lozano, A.
  • Barreras, F.
The energy management strategy plays a major role in hybrid platforms powered by fuel cells (FCs) and batteries. This paper presents an assessment of energy management focused on fuel economy and battery degradation. Particularly, a proposed heuristic strategy and the widely known equivalent consumption minimization strategy are compared with the optimal solution obtained offline via dynamic programming. The case study is based on a real FC hybrid vehicle. Accordingly, the powertrain model of the vehicle used for the simulations is validated experimentally, and the profile of the power demand is measured from the real application. The results show that the proposed strategy offers the same performance as the equivalent consumption minimization strategy when the battery degradation is prioritized, and in comparison with the optimal off-line solution, it can be seen that there is still margin for improvement in terms of battery degradation.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical and cooperative model predictive control of electrical grids by using overlapping information

  • Sanz i López, Víctor
  • Namerikawa, Toru
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The presented study deals with hierarchical and cooperative model predictive control (MPC) of electrical grids. The aim of this study is minimizing electrical frequency deviation while ensuring power levels do not rise too much. The original system is a simply interconnected one divided in several areas and, in order to control eventually disconnected areas due to communication blackouts, an expansion of the original system to a hierarchical version of itself by overlapping original system’s areas., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

PEM automotive stack model with experimental validation

  • Gómez Pomar, Juan Carlos
  • Dombrovski, Johanna Katharina
  • Serra, Maria
  • Husar, Attila Peter
Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Temperature control of open-cathode PEM fuel cells

  • Costa Castelló, Ramon
  • Strahl, Stephan
Proper temperature control of Proton Exchange Membrane (PEM) Fuel Cells is a crucial factor for optimizing fuel cell performance. A robust temperature controller is required for optimal water management of PEM fuel cells. This paper describes a model-based characterization of the equilibrium points of an open-cathode fuel cell system as the baseline for proper controller design, highlighting the relation between fuel cell temperature, humidification and performance. Phase plane analysis of the nonlinear model versus a linearized model around different points of operation shows the potential of approximating the nonlinear system behavior with a linear model. The methodology for the system analysis presented in this paper finally serves for the development of control schemes using robust control techniques. The designed controller is validated in simulation with the nonlinear plant model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Stability analysis of solid oxide fuel cell systems

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Jing, Na
Solid oxide fuel cells (SOFC), with entirely solid structure and high operating temperatures, have attracted research interest in recent years. Unlike other types of fuel cells, low electrode corrosion and low electrolyte looses are assumed due to its solid structure. Furthermore, the high operating temperatures enable SOFC to reach up to 50% to 65% efficiency with excellent impurity tolerance. However, there are several degradation mechanisms in SOFC, such as electrode delamination, electrolyte cracking, electrode poisoning, etc. Most of these degradations are related with the operation conditions, which can be optimized by appropriate control. Since most control algorithms are developed based on the mathematical models, it is important to obtain SOFC control-oriented models. Therefore, this paper aims to develop a SOFC control-oriented model, including the dynamics of inlet manifold, SOFC stack and outlet manifold. Moreover, equilibrium points are characterized and a stability around these equilibrium points analysis is performed. This information can provide guidelines for control strategies design., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Jing, Na
  • Costa Castelló, Ramon
Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reset control for DC-DC converters: an experimental application

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
  • Baños Torrico, Alfonso
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Identification of PEM fuel cells based on support vector regression and orthonormal bases

  • Feroldi, Diego Hernán
  • Gómez, Juan Carlos
  • Roda Serrat, Vicente
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Polymer Electrolyte Membrane Fuel Cells (PEMFC) are efficient devices that convert the chemical energy of the reactants in electricity. In this type of fuel cells, the performance of the air supply system is fundamental to improve their efficiency. An accurate mathematical model representing the air filling dynamics for a wide range of operating points is then necessary for control design and analysis. In this paper, a new Wiener model identification method based on Support Vector (SV) Regression and orthonormal bases is introduced and used to estimate a nonlinear dynamical model for the air supply system of a laboratory PEMFC from experimental data. The method is experimentally validated using a PEMFC system based on a ZB 8-cell stack with Nafion 115 membrane electrode assemblies, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parameter estimation algorithm of H-100 PEM fuel cell

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Jing, Na
Best Oral Communication Award for Young Authors, atorgat pel comitè científic HYCELTEC 2019, Polymer electrolyte membrane fuel cells (PEMFCs) have been recognized as one of the most promising eneygy conversion devices for commercial application due to their specific advantages, such as low operation temperature, zero pollutant emission, and high efficiency, etc. Since PEMFC is a highly nonlinear system and some parameters are related to the operation condition, most existing models are difficult to accurately predict the PEMFC characteristics. Thus, it is necessary to exploit parameter estimation methods for PEMFC to online determine the unknown model parameters by using easily measurable data to obtain concrete models. Most of the parameter estimations schemes for PEMFC have been designed based on intelligent optimization techniques. However, optimization methods cannot address the estimation problem online since they focus exclusively on offline searching procedure, which introduces heavy computational costs in the practical implementation and thus cannot be used in the real-time applications. Therefore, this paper aims to exploit real-time adaptive parameter estimation methods for a nonlinear parametric PEMFC system., Peer Reviewed, Award-winning, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed high temperature PEM fuel cell modelling

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle Arnau, Carles
Trabajo presentado en el VII Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Barcelona (España), del 1 al 3 de julio de 2019, In this article, an HT-PEMFC model based on partial differential equations of fluid dynamics and heat transfer, i.e. distributed model, is defined and introduced as well as the hypoteses assumed for its design. Its formulation, results and implications will be presented as well as its differences with other models presented in the literature., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3- 2-R, MINECO/FEDER). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An adaptive disturbance rejection control scheme for voltage regulation in DC micro-grids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
  • Ramos Fuentes, German A.
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Uncertain generation by renewable sources and load variations have resulted in adding energy storage systems in the grid to maintain grid parameters (voltage, frequency) within prescribed limits. The disturbances being non-deterministic in nature, the voltage regulation control by the storage systems relies mostly on dual loop architecture with an outer voltage and inner current loop. Improvement in controller dynamics can be achieved through feed forward of disturbance profile but at expense of additional sensors and communication in the grid. This work explores the application of an adaptive disturbance rejection control scheme for disturbance estimation (without using additional sensors) employing an extended state and proportional integral observer (PI+ESO). The proposed observer aim to achieve robust disturbance estimation under grid parameter uncertainty. The effectiveness of the proposed scheme over the conventional one will be put forward through H8 and H2 norm analysis of the system. The design and simulation results of the proposed scheme will be presented in this work., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An analysis of energy storage system interaction in a multi objective model predictive control based energy management in DC microgrid

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-deterministic generation from renewable sources have resulted in the incorporation energy storage systems in modern grids. Management of energy between different storage elements need to done optimally to ensure efficient operation of the grid. The intraday energy management problem is addressed in this work through an online model predictive control using multi objective optimisation. This work analyses the energy interaction among different storages when penalty weights in a multi objective optimisation problem is varied, in order to find an optimal scenario in terms of weight distribution. Different scenarios are identified and performance indices are proposed to achieve the same. The work also addresses implicitly the objective of minimising rate of degradation batteries. Simulation results are presented to aid in the analysis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing the efficiency and lifetime of a proton exchange membrane fuel cell using nonlinear model-predictive control with nonlinear observation

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The aim of this research is to develop and test in a simulation environment an advanced model-based control solution for a proton exchange membrane fuel cell (PEMFC) system. A nonlinear model-predictive control (NMPC) strategy is proposed to maximize the active catalytic surface area at the cathode catalyst layer to increase the available reaction area of the stack and to avoid starvation at the catalyst sites. The PEMFC stack model includes a spatial discretization that permits the control strategy to take into account the internal conditions of the system. These internal states are estimated and fed to the NMPC via a nonlinear distributed parameters observer. The air-fed cathode of the PEMFC simulation model includes a two-phase water model for better representation of the stack voltage. The stack temperature is regulated through the use of an active cooling system. The control strategy is evaluated in an automotive application using a driving cycle based on the New European Driving Cycle profile as the case study., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Observador de alta ganancia con zona muerta para pilas de combustible PEM de cátodo abierto

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
Premio al mejor trabajo en Ingeniería de Control presentado en las XL Jornadas de Automática, otorgado por el Comité Español de Automàtica, celebradas en Ferrol 2019, En este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia, además se modifica con una función de zona muerta dinámica. En este trabajo se muestra que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Peer Reviewed, Award-winning, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Different architectures to develop repetitive controllers

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Ramos Fuentes, German A.
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work several architectures to implement repetitive controllers are compared. A complete analytical analysis is performed for these dierent architectures and a simulation example with a power converter is included., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Observación de la fracción de agua líquida en pilas de combustible tipo PEM de cátodo abierto

  • Costa Castelló, Ramon
  • Luna Pacho, Julio Alberto
En este trabajo se diseña un observador no-lineal basado en modos deslizantes para la estimación de la fracción de agua líquida en una pila de combustible tipo PEM de cátodo abierto. La pila de combustible se modela con dos estados dinámicos: la temperatura de la pila y la saturación de agua líquida. La estrategia de observación se valida en simulación mediante un ciclo de conducción ARTEMIS., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive estimation of time-varying parameters with application to roto-magnet plant

  • Na, Jing
  • Xing, Yashan
  • Costa Castelló, Ramon
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents an alternative adaptive parameter estimation framework for nonlinear systems with time-varying parameters. Unlike existing techniques that rely on the polynomial approximation of time-varying parameters, the proposed method can directly estimate the unknown time-varying parameters. Moreover, this paper proposes several new adaptive laws driven by the derived information of parameter estimation errors, which achieve faster convergence rate than conventional gradient descent algorithms. In particular, the exponential error convergence can be rigorously proved under the well-recognized persistent excitation condition. The robustness of the developed adaptive estimation schemes against bounded disturbances is also studied. Comparative simulation results reveal that the proposed approaches can achieve better estimation performance than several other estimation algorithms. Finally, the proposed parameter estimation methods are verified by conducting experiments based on a roto-magnet plant., Peer Reviewed, Postprint (author's final draft)