Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 107
Encontrada(s) 2 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a Twisting based algorithm

  • Dòria-Cerezo, Arnau
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Trabajo presentado a la 39th IECON celebrada en Viena del 10 al 13 de noviembre de 2013., This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., This work was supported by the Spanish Government Research Project DPI2010-15110, Project Marie Curie FP7-2011-IIF-299767/911767 ACRES (EU), CONICET and UNLP (Argentina). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños, Fernando
Trabajo presentado a la ACC celebrada en Washington del 17 al 19 de junio de 2013., We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., This research has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MICINN-España), the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno-Noguer, Francesc
  • Angulo, M. T.
Trabajo presentado al 52nd CDC celebrado en Florencia del 10 al 13 de diciembre de 2013., In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCHJU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain), the CSIC project MACPERCON (code 201250E027) and the CSIC JAE-DOC Research Programme. J. Moreno gratefully acknowledges the financial support from PAPIIT, UNAM, grant IN111012, and Fondo de Colaboración del II-FI, UNAM, IISGBAS-165-2011., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas, J. D.
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
Trabajo presentado al 39th IECON celebrado en Viena del 10 al 13 de noviembre de 2013., In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., The research work of José David Rojas has been supported by the project 322-B2-727 of the Vicerrectoría de Investigación, Universidad de Costa Rica. The research work of C. Ocampo-Martinez has been supported by the project MACPERCON (Ref. 201250E027) of the Spanish National Research Council (CSIC). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental study of hydrogen purge effects on performance and efficiency of an open-cathode Proton Exchange Membrane fuel cell system

  • Strahl, Stephan
  • Husar, Attila
  • Riera, Jordi
The performance and efficiency of an open-cathode PEM fuel cell system in dead-ended anode (DEA) configuration and hydrogen purges is analyzed in this work. Excess water and crossed-over nitrogen in the anode decrease the hydrogen concentration at the catalyst surface, which in turn causes performance losses. Purging the anode with hydrogen removes water and nitrogen and thus recovers the performance. However, this means wasting hydrogen and decreasing overall system efficiency. Gas chromatography was used to detect and quantify the accumulated nitrogen in the anode during DEA operation. The experiments show that the major performance limitation in the studied system is related to water instead of nitrogen. Moreover, oxygen was detected in the anode exhaust gas after long purge intervals, which is an indicator for corrosion of the cathode carbon support structure. Experimental observations revealed that the need for a hydrogen purge strongly depends on the operating conditions and the state-of-health of the fuel cell. It is shown that flooding on the anode and drying of the cathode catalyst layer may occur simultaneously during purged operation. Therefore, purge decisions must be evaluated online, depending on the operating conditions. © 2013 Elsevier B.V. All rights reserved., This work is partially funded by the National Projects MICINN DPI2011-25649 and MINECO ENE2012-36368, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila
  • Puleston, Pablo Federico
  • Riera, Jordi
Paper presented at the “Fundamentals & Developments of Fuel Cells Conference 2013 (FDFC2013)”, April 16–18, 2013, Karlsruhe, Germany., The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., This work is partially funded by the national project MICINN DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419. The work of P. Puleston was supported by CONICET and UNLP (Argentina), as well as Marie Curie FP7-2011-IIF, ACRES (299767/911767) (EU). Finally, the authors highly appreciate the support of the LEICI and the UNLP in enabling a research stay of S. Strahl at the laboratory in La Plata., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of an adaptive extremum seeking algorithm for hydrogen minimization in PEM fuel cell based systems

  • Kunusch, Cristian
  • Castaños, Fernando
Presentado al ECC 2013 celebrado en Zurich del 17 al 19 de julio., This work presents initial experimental results of an adaptive sliding-mode extremum seeker that minimizes the hydrogen consumption in a fuel cell based system. The extremum seeker is based on the classical steepest-descent method, the main challenge being the fact that the gradient of the objective function is unknown. The gradient is estimated by means of a sliding-mode adaptive estimator. The strategy is applied in experimental practical situations in a fuel cell test bench, this allows to asses the performance of the scheme as well as the difficulties that arise in real applications., This research has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09- GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MICINN-España), the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans, Noemí
  • Llorca, Jordi
  • Husar, Attila
Presentado al IV Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Estoril (Portugal) del 26 al 28 de junio de 2013., The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., This work is partially funded by the projects MICINN DPI2011-25649 and MINECO ENE2012-36368, and by the contract PUMA-MIND FP7 303419 with the European Comission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, M.
  • Husar, Attila
  • Serra-Prat, María
  • Riera, Jordi
Presentado a la 5th International Conference on Fundamentals & Developments of Fuel Cells celebrada en Karlsruhe (Alemania) del 16 al 18 de abril de 2013., The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., This work is partially funded by the national project MICINN DPI2011-25649, and by the contract PUMA-MIND FP7 303419 with the European Comission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
Presentado a la 5th International Conference on Fundamentals & Developments of Fuel Cells celebrada en Karlsruhe (Alemania) del 16 al 18 de abril de 2013., This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento-Carnevali, María Laura
  • Serra-Prat, María
  • Batlle, Carles
In this work, a simulation tool for proton exchange membrane fuel cells (PEMFC) has been developed, based on a distributed parameter model. The tool is designed to perform studies of time and space variations in the direction of the gas channels. Results for steady-state and dynamic simulations for a single cell of one channel are presented and analyzed. Considered variables are concentrations of reactants, pressures, temperatures, humidification, membrane water content, current density, among others that have significant effects on the performance and durability of PEMFC., This work has been supported by national projects DISCPICO with reference DPI2010-15274, MESPEM with reference DPI2011-25649 and european project PUMA MIND., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Presentado a la XV Reunión de Trabajo en Procesamiento de la Informnación y Control celebrada en Argentina del 16 al 20 de septiembre de 2013., En este trabajo se presenta el diseño de un controlador para maximizar la eficiencia de una pila de combustible, en base a un algoritmo Super-twisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Este trabajo fue realizado con el apoyo de la UNLP, CONICET, y SECyT, de Argentina; y del FP7-PEOPLE-2011 Marie-Curie Action, Proyectos IIF-ACRES (299767/911767) y (GA: PCIG09-GA-2011-293876), de la Unión Europea, los proyectos Puma-Mind (GA: FCH-JU-2011-1-303419) y CICYT DPI2011-25649 (MINECO-España) y el programa JAE-DOC del CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cell systems

  • Bianchi, Fernando D.
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Sánchez-Peña, Ricardo S.
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC). In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFCs present a highly nonlinear behavior that demands nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. In order to deal with the saturation of the control action, an LPV anti-windup compensation is also proposed. The complete control strategy is applied to several experimental practical situations in a laboratory fuel cell system to evaluate its performance and the reliability of the proposed algorithms., The research of F.D. Bianchi was supported by the European Regional Development Funds (ERDF, FEDER Programa Competitivitat de Catalunya 2007-2013). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876) and project Puma-Mind (GA: FCH-JU-2011-1-303419), as well as by the CICYT project DPI2011-25649 (MICINN-Spain). The research of C. Ocampo-Martinez has been supported by the project MACPERCON (Ref. 201250E027) of the CSIC. The research of R.S. Sánchez Peña has been supported by CONICET and grant PICT2008-290 from the PRH Program of the Ministry of Science, Technology and Innovation of Argentina., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrode structure effects on the performance of open-cathode proton exchange membrane fuel cells: A multiscale modeling approach

  • Strahl, Stephan
  • Husar, Attila
  • Franco, Alejandro A.
In this paper we present a new dynamic multiscale model of an open-cathode Polymer Electrolyte Membrane Fuel Cell (PEMFC). The model describes two-phase water transport, electrochemistry and thermal management within a framework that combines a Computational Fluid Dynamics (CFD) approach with a micro-structurally-resolved model predicting the water filling dynamics of the electrode pores and the impact of these dynamics on the evolution of the electrochemically active surface area (ECSA). The model allows relating for the first time the cathode electrode structure to the cell voltage transient behavior during experimental changes in fuel cell temperature. The effect of evaporation rates, desorption rates and temperature changes on the performance of four different electrode pore size distributions are explored using steady-state and transient numerical simulations. The results are discussed with respect to water management and temperature control., This work is partially funded by the national project MICINNDPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans, Noemí
  • Llorca, Jordi
  • Husar, Attila
The well-known challenges to overcome in PEM fuel cell research are their relatively low durability and the high costs for the platinum catalysts. This work focuses on degradation mechanisms that are present in open-cathode PEM fuel cell systems and their links to the decaying fuel cell performance. Therefore a degraded, open-cathode, 20 cell, PEM fuel cell stack was analyzed by means of in-situ and ex-situ techniques. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometry show that degradation affects individual cells quite differently towards the end of life of the stack. Cells located close to the endplates of the stack show the biggest performance decay. Electrochemical impedance spectroscopy (EIS) data present non-reversible catalyst layer degradation but negligible membrane degradation of several cells. Post-mortem, ex-situ experiments, such as cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) show a significant active area loss of the first cells within the stack due to Pt dissolution, oxidation and agglomeration. Scanning electron microscope (SEM) images of the degraded cells in comparison with the normally working cells in the stack show severe carbon corrosion of the cathode catalyst layers., This work is partially funded by the national projects MICINN DPI2011-25649 and MINECO ENE2012-36368, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • Moré, Jerónimo J.
  • Puleston, Pablo Federico
  • Kunusch, Cristian
  • Allué, Miguel
This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., This research was supported by the Universidad Nacional de La Plata, CONICET, and SECyT, from Argentina; by FP7-PEOPLE-2011 Marie-Curie Action, Project ACRES (IIF-299767/911767) and ACOFC (PCIG09-GA- 2011-293876) from the EU; by Project Puma-Mind (FCHJU-2011-1-303419); partially founded by Project MICINN DPI2011-25649 and supported by the Universitat Polit`ecnica de Catalunya, and the CSIC, from Spain., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

2D transient modeling of hydrogen purge and temperature effects on the performance of PEM fuel cells

  • Strahl, Stephan
  • Husar, Attila
  • Riera, Jordi
Resumen del trabajo presentado al 11th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (ModVal 11) celebrado del 17 al 19 de marzo de 2014 en Winterthur (Switzerland)., Project PUMA MIND (FP7-FCH-JU-2011-1-303419) and project MESPEM (DPI2011-25649)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A two-dimensional multi-physics approach of transient PEMFC modeling in a virtual fuel cell car

  • Mayur, Manik
  • Strahl, Stephan
  • Husar, Attila
  • Bessler, Wolfgang G.
Resumen del trabajo presentado al 11th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (ModVal 11) celebrado del 17 al 19 de marzo de 2014 en Winterthur (Switzerland)., Project PUMA MIND (FP7-FCH-JU-2011-1-303419) and project MESPEM (DPI2011-25649)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control de temperatura en pilas de combustible tipo PEM de cátodo abierto

  • Strahl, Stephan
  • Husar, Attila
  • Riera, Jordi
  • Costa Castelló, Ramon
Trabajo presentado a las XXXV Jornadas de Automática celebradas en Valencia del 3 al 5 de septiembre de 2014., En este trabajo se analiza el modelo de una pila de combustible tipo PEM de cátodo abierto. Se caracterizan sus puntos de equilibrio. Se analiza el plano de fase del modelo alrededor de diferentes puntos de operación y se plantea una linearización del comportamiento del sistema. Finalmente se plantea un diseño basado en control robusto. Este diseño se valida con el modelo completo., Este trabajo ha sido parcialmente financiado por los proyectos MICINN DPI2011-25649 y PUMAMIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento-Carnevali, María Laura
  • Batlle, Carles
  • Serra-Prat, María
  • Massana, Inmaculada
Trabajo presentado al Iberconappice 2014 (Congreso Iberoamericano de Hidrógeno y Pilas de Combustible) celebrado en Barcelona del 15 al 17 de octubre., This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model., This work has been supported by National Project DPI2011-25649 and European Project PUMA MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna, Julio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado al Iberconappice 2014 (Congreso Iberoamericano de Hidrógeno y Pilas de Combustible) celebrado en Barcelona del 15 al 17 de octubre., [EN]: This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work., [ES]: Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección de los estados a estimar está basada en la funcionalidad y desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos a partir de un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de correción basada en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador en la reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., This work has been partially funded by the Spanish National Project DPI2011-25649 and the European project PUMA MIND SPI-JTI-FCH 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento-Carnevali, María Laura
  • Batlle, Carles
  • Massana, Inmaculada
  • Serra-Prat, María
Trabajo presentado a la European Hydrogen Energy Conference, celebrada en Sevilla (España) del 12 al 14 de marzo de 2014.-- Este ítem (excepto textos e imágenes no creados por el autor) está sujeto a una licencia de Creative Commons: Attribution-NonCommercial-NoDerivs 3.0 Spain., This work has been supported by National Project DPI2011-25649 and European Project PUMA MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Experimental and model-based analysis for performance and durability improvement of PEM fuel cells

  • Strahl, Stephan
[EN]: Increasing global energy demand, growing carbon emissions and the depletion of fossil fuel sources are some of the most important driving forces for the development of sustainable energy solutions. Proton Exchange Membrane (PEM) fuel cells have been demonstrated to be a potential candidate for clean energy conversion in a wide range of applications reaching from highly dynamic transportation systems to stationary systems. Despite their benefits, such as high efficiency and wide operating range, PEM fuel cells must still meet or exceed the technological advantages, such as durability and cost, of conventional power systems in order to be truly competitive. Thus, current research is focused on improving these aspects. This doctoral thesis combines experimental and model-based studies in order to improve performance and durability of PEM fuel cells, that work without external humidification, as demanded by recent government-supported research programs. Improved performance and durability can be obtained by proper system control. The key factor for the development of successful control strategies is adequate thermal and water management considering their interconnections. Therefore, this work investigates the important links between performance, efficiency and lifetime with respect to fuel cell temperature and humidification. The experimental evaluation of temperature-related and purge-related effects shows the great potential of improving the system performance by proper thermal management. In-situ and ex-situ experiments, such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), gas chromatography (GC), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were utilized in order to explore short-term and long-term effects of operation modes on performance and durability. To provide a better understanding of the experimentally observed phenomena and their different dynamics with respect to the development of efficient controllers, mathematical models have been derived. The dynamic models allow for relating electrode structure to the cell voltage transient behavior during changes in fuel cell temperature and humidification, including important phase change and ionomer sorption dynamics of water. The experimentally validated, model-based analysis provides recommendations of proper operating conditions and catalyst structure, such as optimal fuel cell temperature and adequate pore-size-distribution, in order to improve the PEM fuel cell performance. The modular character and inherent adaptability of the models has been successfully demonstrated in the study of water transport in a high temperature PEM fuel cell stack. It is shown how mathematical modeling can improve the interpretation of experimental results and provide insight into experimentally non-observable interactions. In conclusion, the presented laboratory and model-based work, including the developed experimental and mathematical tools, contribute to current international research targets for advancing sustainable energy solutions., [ES]: La creciente demanda mundial de energía, el crecimiento de las emisiones de dióxido de carbono y el agotamiento de las fuentes de combustible fósiles son algunos de los factores más importantes para el desarrollo de soluciones basadas en energies sostenibles. Las pilas de combustible de tipo Proton Exchange Membrane (PEM) han demostrado ser un candidato potencial para la conversión limpia de la energía en una extensa gama de aplicaciones, desde los sistemas de transporte altamente dinámicos hasta sistemas estacionarios. No obstante sus beneficios, tales como una alta eficiencia y un amplio rango de operación, las pilas de combustible PEM todavía deben cumplir o superar las ventajas tecnológicas de los sistemas de energía convencionales, como son su durabilidad y coste, con el fin de ser verdaderamente competitivas. Por lo tanto, la investigación actual se centra en la mejora de estos aspectos. Esta tesis doctoral combina estudios experimentales y estudios basados en modelos físicos con el fin de mejorar el rendimiento y la durabilidad de las pilas de combustible PEM que trabajan sin humidificación externa, tal y como exigen recientes programas de investigación apoyados por los gobiernos. La mejora del rendimiento y de la durabilidad se puede obtener por control apropiado del sistema. El factor clave para el desarrollo de estrategias de control exitosas es la gestión adecuada de la temperatura y del agua y sus interconexiones. Por lo tanto, este trabajo investiga los vínculos importantes entre el rendimiento, la eficiencia y la vida útil con respecto a la temperatura de la pila de combustible y su humidificación. La evaluación experimental de los efectos relacionados con la temperatura y las purgas de hidrógeno muestra el gran potencial para mejorar el rendimiento del sistema pila mediante una gestión térmica adecuada. En esta tesis se emplean experimentos in-situ y ex-situ, tales como la espectroscopía electroquímica de impedancia (EIS), la voltametría cíclica (CV), la cromatografía de gases (CG), la espectroscopia de fotoelectrones emitidos por rayos X (XPS), la difracción de rayos X (XRD) y la microscopía electrónica de barrido (SEM) con el fin de explorar los efectos a corto plazo y a largo plazo de los modos de operación sobre el rendimiento y la durabilidad de una pila PEM. Para proporcionar una mejor comprensión de los fenómenos observados experimentalmente y sus diferentes dinámicas para el correcto desarrollo de controladores eficientes, se derivan modelos matemáticos dinámicos. Los modelos permiten relacionar la estructura de los electrodos con el comportamiento transitorio del voltaje durante los cambios de temperatura y de humidificación de la pila de combustible, incluyendo las dinámicas importantes del cambio de fase y de adsorción y desorción del agua. El análisis basado en modelos validados experimentalmente proporciona recomendaciones de las condiciones de funcionamiento y de la estructura del catalizador, tales como la temperatura óptima y la distribución de tamaño de poros apropiada, con el fin de mejorar el rendimiento de la pila de combustible PEM. El carácter modular y la adaptabilidad inherente de los modelos propuestos se demuestra con éxito en el estudio de transporte de agua en un stack de pilas de combustible PEM de alta temperatura. Se muestra como el modelado matemático puede mejorar la interpretación de los resultados experimentales y proporcionar información sobre las interacciones que experimentalmente no son observables. En conclusión, el trabajo de laboratorio y el basado en modelos que se presenta en esta tesis doctoral, incluyendo las herramientas experimentales y matemáticas desarrolladas, contribuyen a la consecución de los actuales objetivos internacionales de investigación que deben permitir aportar mejoras en las soluciones basadas en energías sostenibles., My doctoral thesis was funded by the Universitat Politècnica de Catalunya through the FPI doctoral scholarship. The involved research activities were also partially funded by the project DPI2011-25649 of the Spanish Council of Science and Innovation and by the project PUMA-MIND FP7 303419 of the European Seventh Framework Program for Research., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance and degradation of Proton Exchange Membrane Fuel Cells: State of the art in modeling from atomistic to system scale

  • Jahnke, T.
  • Franco, Alejandro A.
  • Strahl, Stephan
  • Serra-Prat, María
  • Mayur, Manik
  • Bessler, Wolfgang G.
  • Kompis, C.
Jahnke, T. et al., Proton Exchange Membrane Fuel Cells (PEMFC) are energy efficient and environmentally friendly alternatives to conventional energy conversion systems in many yet emerging applications. In order to enable prediction of their performance and durability, it is crucial to gain a deeper understanding of the relevant operation phenomena, e.g., electrochemistry, transport phenomena, thermodynamics as well as the mechanisms leading to the degradation of cell components. Achieving the goal of providing predictive tools to model PEMFC performance, durability and degradation is a challenging task requiring the development of detailed and realistic models reaching from the atomic/molecular scale over the meso scale of structures and materials up to components, stack and system level. In addition an appropriate way of coupling the different scales is required. This review provides a comprehensive overview of the state of the art in modeling of PEMFC, covering all relevant scales from atomistic up to system level as well as the coupling between these scales. Furthermore, it focuses on the modeling of PEMFC degradation mechanisms and on the coupling between performance and degradation models., The research leading to this review has been partially supported by the European Union's Seventh Framework Program for the Fuel Cells and Hydrogen Joint Technology Initiative under the project PUMA MIND (grant agreement no 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault-tolerant unfalsified control for PEM fuel cell systems

  • Bianchi, Fernando D.
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
  • Sánchez-Peña, Ricardo S.
This paper addresses the implementation of a data-driven control strategy in a real test bench based on proton exchange membrane fuel cells (PEMFCs). The proposed control scheme is based on unfalsified control, which allows adapting in real time the control law by evaluating the performance specifications based only on measured input-output data. This approach is especially suitable to deal with nonlinearity, model uncertainty, and also possible faults that may occur in PEMFCs. The control strategy has been applied to several experimental practical situations in order to evaluate not only the system performance, but also different fault scenarios. The experimental results have shown the effectiveness of the proposed approach to regulate the oxygen stoichiometry in real-time operation, as well as to maintain a proper system performance under fault situations. Also, a start-up mass-flow controller is added in order to bring the system toward its normal operating conditions., The research of C. Ocampo-Martinez and C. Kunusch has been supported by the project MACPERCON (Ref. 201250E027) of the CSIC. The research of C. Kunusch has been also supported by the 7th Framework Programme of the EU through the Marie Curie actions (GA: PCIG09-GA-2011-293876) and Puma-Mind project (GA: FCH-JU-2011-1-303419), as well as by the CICYT project DPI2011-25649 (MICINN-Spain). The research of R.S. S´anchez Peña has been supported by CONICET and grant PICT2008-290 from the PRH Program of the Ministry of Science, Technology and Innovation of Argentina., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear distributed parameter observer design for fuel cell systems

  • Luna, Julio
  • Husar, Attila
  • Serra-Prat, María
This paper presents the development of a nonlinear state observer to estimate the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell energy system. The selection of the estimated states follows functionality and fuel cell performance criteria. The implementation is based on the finite element discretisation of a fuel cell distributed parameter model. Forward and backwards discretisation of the partial derivative equations is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the synthesis procedure of the observer. A second-order sliding-mode super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. The sliding-mode control approach grants a suitable corrective action without incrementing the model-dependency of the observer. Simulation results are presented to show the performance of the proposed observer of the fuel cell internal states and to extract conclusions for future research work., This work is partially funded by the Spanish national MICINN project DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dither-less extremum seeking for hydrogen minimization in PEM fuel cells

  • Castaños, Fernando
  • Kunusch, Cristian
This paper presents a nonsmooth adaptive extremum seeker that minimizes the hydrogen consumption in a fuel-cell system. The extremum seeker operates by estimating the gradient of the objective function but, unlike other seekers, it does not require a dither signal to produce such estimate. The absence of a dither signal simplifies the choice of parameter values for the seeker, and more importantly, it allows it to converge to the optimal value exactly, not only to a small neighborhood. The proper functioning of the proposed scheme is proved using nonsmooth Lyapunov analysis. The strategy is tested on the input-output map of a real polymer electrolyte fuel cell., The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain), the CSIC MACPERCON project (201250E027) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multi-timescale modeling methodology for PEMFC performance and durability in a virtual fuel cell car

  • Mayur, Manik
  • Strahl, Stephan
  • Husar, Attila
  • Bessler, Wolfgang G.
The durability of polymer electrolyte membrane fuel cells (PEMFC) is governed by a nonlinear coupling between system demand, component behavior, and physicochemical degradation mechanisms, occurring on timescales from the sub-second to the thousand-hour. We present a simulation methodology for assessing performance and durability of a PEMFC under automotive driving cycles. The simulation framework consists of (a) a fuel cell car model converting velocity to cell power demand, (b) a 2D multiphysics cell model, (c) a flexible degradation library template that can accommodate physically-based component-wise degradation mechanisms, and (d) a time-upscaling methodology for extrapolating degradation during a representative load cycle to multiple cycles. The computational framework describes three different time scales, (1) sub-second timescale of electrochemistry, (2) minute-timescale of driving cycles, and (3) thousand-hour-timescale of cell ageing. We demonstrate an exemplary PEMFC durability analysis due to membrane degradation under a highly transient loading of the New European Driving Cycle (NEDC)., The research leading to this work has been supported by the European Union's Seventh Framework Program for the Fuel Cells and Hydrogen Joint Technology Initiative under the project PUMA MIND (grant agreement no 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter nonlinear state observer with unmatched disturbance estimation for PEMFC systems

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado a la 6th International Conference on ”Fundamentals & Development of Fuel Cells”, celebrada en Toulouse (Francia) del 3 al 5 de febrero de 2015., In this paper a nonlinear state observer based on a distributed parameter model is proposed for a proton exchange membrane fuel cell (PEMFC). The estimation technique is implemented using a model-based nonlinear observer with a nonlinear disturbance observer in parallel. To implement the model, a finite element discretisation is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the observer synthesis procedure. By means of this double observation technique it is possible to reconstruct the gases concentrations internal states in the gas channels of the PEMFC in the presence of disturbances. The reaction rates and water transport terms that cross the membrane are considered as unknown unmatched disturbances of the model, henceforth the implementation of a disturbance observer to estimate them. Simulation results of the proposed solution are provided and discussed., This work has been partially funded by the Spanish national project MESPEM (ref. DPI2011-25649), the Italian MAEIC project RODEO (ref. PGR000152) and the European Project PUMA MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems: A sliding mode approach

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
  • Serra-Prat, María
Trabajo presentado al V Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Tenerife (España) del 5 al 8 de julio de 2015., In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., This work has been partially supported by the Spanish Research and Technology Ministry under project DPI2011-25649, by the Italian MAEIC under project RODEO PGR000152 and by the European Comission under project PUMA-MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila
  • D'Elia, Gaia
  • Roda, Vicente
Trabajo presentado al V Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Tenerife (España) del 5 al 8 de julio de 2015., The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., This work is partially funded by the Spanish national MICINN project DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Characterization of voltage loss for proton exchange membrane fuel cell

  • Elia, Gaia'd
Thesis presented to obtain the Energy Engineering Bachelor., [CA]: Les piles de combustible són, cada dia més, una alternativa als clàssics vectors energètics. La utilització de l’hidrogen com a font energètica suposa una important reducció d’emissions i costos, tot i que la tecnologia es encara massa cara per entrar en competició directa amb fonts i vectors energètics tradicionals. En aquest context es desenvolupa aquesta tesis, més en concret, en el marc del programa PUMA MIND, un programa d’investigació europeu que cerca optimitzar el funcionament de les piles de combustible de membrana polimèrica (PEM) i reduir-ne els costos associats per aplicacions en el sector de l’automoció. El treball es centra en la consolidació i reproducció de mètodes d’identificació i caracterització de les pèrdues de voltatge i els seus indicadors associats a partir de dades experimentals obtingudes al laboratori de piles de l’Institut de Robòtica i Informàtica Industrial (UPC – CSIC). Especialment interessant és l’estudi de la variació de la densitat de corrent d’intercanvi al càtode, relacionada amb les pèrdues de concentració d’oxigen a la capa catalitzadora del càtode. A més a més, aquestes dades experimental es poden utilitzar per validar models fluidodinàmics computacionals, tasca que s’inicia en aquest PFG i es continuarà en futurs estudis., [ES]: Las pilas de combustible son, cada día más, una alternativa a los clásicos vectores energéticos. La utilización del hidrogeno como fuente energética supone una importante reducción de emisiones y costes; aun así el precio de esta nueva tecnología sigue siendo demasiado elevado para entrar en competición directa con las fuentes y vectores energéticos tradicionales. En este contexto se desarrolla esta tesis, más en concreto, en el marco del programa PUMA MIND, un programa de investigación europeo que busca optimizar el funcionamiento de las pilas de combustible de membrana polimérica (PEM) y reducir sus costes asociados para aplicaciones en el sector de la automoción. En concreto, esta tesis se centra en la consolidación y reproducción de métodos de identificación y caracterización de la perdidas de voltaje y de sus indicadores asociados a partir de datos experimentales obtenidos en el laboratorio de pilas del Instituto de Robótica (UPC – CSIC). Especialmente interesante es el estudio de la variación de la densidad de corriente de intercambio del cátodo, relacionada con las pérdidas de concentración de oxígeno en la capa catalizadora del cátodo. Además, estos datos experimentales se pueden utilizar para validar modelos de dinámica de fluidos computacional, tarea que se inicia con este PFG y que seguirá en futuros estudios., [EN]: Fuel cells are, every day more and more, an alternative to the usual energy vectors. Using hydrogen as source, the fossil costs and the emissions are highly reduced. Despite this, the investment costs of this new technology are still too high to compete with the traditional energy vectors. In this context is where this thesis is developed, more specifically, as part of the European investigation program PUMA MIND which aim is to optimize the performance of the polymeric exchange membranes fuel cells (PEMFC) and reduce the associated costs for applications in the automotive sector. This work is centred in the consolidation and reproduction of methods for identification and characterization of voltage losses and the associated indicators starting from experimental data obtained in the Fuel Cell laboratory at the Institut de Robòtica i Informàtica Industrial (UPC – CSIC). Especially interesting is the study of the cathode exchange current density variation, related with the reduction of the oxygen concentration at the cathode’s catalyst. Moreover, this experimental data can be used to validate computational fluid dynamics (CFD) models, work that starts whit this thesis and will continue in future studies., Programa de investigación europeo PUMA MIND., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: A comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2R), the Regione Autonoma della Sardegna projectCRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

  • Luna, Julio
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila
  • Serra-Prat, María
  • Hissel, Daniel
In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), the LABEX ACTION (ref. ANR-11-LABX-01-01) and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Modeling and control of PEM fuel cells

  • Sarmiento-Carnevali, María Laura
Programa de Doctorat: Automàtica, Robòtica i Visió., [EN]: In recent years, the PEM fuel cell technology has been incorporated to the R&D plans of many key companies in the automotive, stationary power and portable electronics sectors. However, despite current developments, the technology is not mature enough to be significantly introduced into the energy market. Performance, durability and cost are the key challenges. The performance and durability of PEM fuel cells significantly depend on variations in the concentrations of hydrogen and oxygen in the gas channels, water activity in the catalyst layers and other backing layers, water content in the polymer electrolyte membrane, as well as temperature, among other variables. Such variables exhibit internal spatial dependence in the direction of the fuel and air streams of the anode and cathode. Highly non-uniform spatial distributions in PEM fuel cells result in local over-heating, cell flooding, accelerated ageing, and lower power output than expected. Despite the importance of spatial variations of certain variables in PEM fuel cells, not many works available in the literature target the control of spatial profiles. Most controloriented designs use lumped-parameter models because of their simplicity and convenience for controller performance. In contrast, this Doctoral Thesis targets the distributed parameter modelling and control of PEM fuel cells. In the modelling part, the research addresses the detailed development of a non-linear distributed parameter model of a single PEM fuel cell, which incorporates the effects of spatial variations of variables that are relevant to its proper performance. The model is first used to analyse important cell internal spatial profiles, and it is later simplified in order to decrease its computational complexity and make it suitable for control purposes. In this task, two different model order reduction techniques are applied and compared. The purpose of the control part is to tackle water management and supply of reactants, which are two major PEM fuel cell operation challenges with important degradation consequences. In this part of the Thesis, two decentralised control strategies based on distributed parameter model predictive controllers are designed, implemented and analysed via simulation environment. State observers are also designed to estimate internal unmeasurable spatial profiles necessary for the control action. The aim of the first strategy is to monitor and control observed water activity spatial profiles on both sides of the membrane to appropriate levels. These target values are carefully chosen to combine proper membrane, catalyst layer and gas diffusion layer humidification, whilst the rate of accumulation of excess liquid water is reduced. The key objective of this approach is to decrease the frequency of water removal actions that cause disruption in the power supplied by the cell, increased parasitic losses and reduction of cell efficiency. The second strategy is a variation of the previous water activity control strategy, which includes the control of spatial distribution of gases in the fuel and air channels. This integrated solution aims to avoid starvation of reactants by controlling corresponding concentration spatial profiles. This approach is intended to prevent PEM fuel cell degradation due to corrosion mechanisms, and thermal stress caused by the consequences of reactant starvation. The results show increased fuel cell performance considering the spatial control approaches proposed in this Thesis, in comparison to non-spatial control strategies. Moreover, the decentralised feature of the control scheme, combined with the use of order-reduced models within the model predictive controllers, has important impact on the overall control performance., [ES]: A pesar de los avances actuales, la tecnología de celdas de hidrógeno tipo PEM no está suficientemente preparada para ser ampliamente introducida en el mercado energético. Rendimiento, durabilidad y costo son los mayores retos. El rendimiento y la durabilidad de las celdas dependen significativamente de las variaciones en las concentraciones de hidrógeno y oxígeno en los canales de alimentación de gases, la humedad relativa en las capas catalizadoras, el contenido de agua de la membrana polimérica, así como la temperatura, entre otras variables. Dichas variables presentan dependencia espacial interna en la dirección del flujo de gases del ánodo y del cátodo. Distribuciones espaciales altamente no uniformes en algunas variables de la celda resultan en sobrecalentamiento local, inundación, degradación acelerada y menor potencia de la requerida. Muy pocos trabajos disponibles en la literatura se ocupan del control de perfiles espaciales. La mayoría de los diseños orientados a control usan modelos de parámetros concentrados que ignoran la dependencia espacial de variables internas de la celda, debido a la complejidad que añaden al funcionamiento de controladores. En contraste, esta Tesis Doctoral trata la modelización y control de parámetros distribuidos en las celdas de hidrógeno tipo PEM. En la parte de modelización, esta tesis presenta el desarrollo detallado de un modelo no lineal de parámetros distribuidos para una sola celda, el cual incorpora las variaciones espaciales de todas las variables que son relevantes para su correcto funcionamiento. El modelo se usa primero para analizar importantes perfiles espaciales internos, y luego se simplifica para reducir su complejidad computacional y adecuarlo a propósitos de control. En esta tarea se usan y se comparan dos técnicas de reducción de orden de modelos. El propósito de la parte de control es abordar la gestión de agua y el suministro de reactantes, que son dos grandes retos en el funcionamiento de las celdas con importantes consecuencias para su vida útil. En esta parte de la tesis, dos estrategias de control descentralizadas, basadas en controladores predictivos de modelos de referencia con parámetros distribuidos, son diseñadas, implementadas y analizadas en un entorno de simulación. Estas tareas incluyen también el diseño de observadores de estado que estiman los perfiles espaciales internos necesarios para la acción de control. El objetivo de la primera estrategia es monitorear y controlar perfiles espaciales observados de la humedad relativa en las capas catalizadoras para mantenerlos en niveles apropiados. Estos niveles son escogidos cuidadosamente para combinar la correcta humidificación de la membrana y las capas catalizadoras, reduciendo la velocidad de acumulación de agua líquida. El objetivo clave de este enfoque es disminuir la frecuencia de las acciones de remoción de agua dentro de la celda, ya que estas acciones causan interrupción en la potencia suministrada, aumento de las cargas parasitarias y disminución de la eficiencia. La segunda estrategia es una variación de la estrategia anterior que considera adicionalmente el control de la distribución espacial de los gases en los canales del ánodo y cátodo. Esta solución integrada tiene como objetivo evitar la ausencia local de reactantes mediante el control de perfiles espaciales de concentración de gases. Este enfoque pretende prevenir la degradación de las celdas debido a mecanismos de corrosión. Los resultados muestran un mayor rendimiento de la celda considerando los enfoques de control de perfiles espaciales propuestos en esta tesis, en comparación con técnicas de control que ignoran dichos perfiles. Además, la característica descentralizada de los esquemas de control, combinada con el uso de modelos reducidos dentro de los controladores predictivos, tiene un impacto positivo importante en el rendimiento general del control., This work was partially funded by Spanish MEC-FPU Grant number AP-2010-3969, the Spanish national projects MESPEM (DPI2011-25649) and MICAPEM (DPI2015-69286-C3-2-R, MINECO/FEDER) and the European project PUMA-MIND (FP7-FCH-JU-2011-1- 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast prediction of adsorption properties for platinum nanocatalysts with generalized coordination numbers

  • Calle-Vallejo, Federico
  • Martínez, José I.
  • García-Lastra, J. M.
  • Sautet, Philippe
  • Loffreda, David
Platinum is a prominent catalyst for a multiplicity of reactions because of its high activity and stability. As Pt nanoparticles are normally used to maximize catalyst utilization and to minimize catalyst loading, it is important to rationalize and predict catalytic activity trends in nanoparticles in simple terms, while being able to compare these trends with those of extended surfaces. The trends in the adsorption energies of small oxygen- and hydrogen-containing adsorbates on Pt nanoparticles of various sizes and on extended surfaces were analyzed through DFT calculations by making use of the generalized coordination numbers of the surface sites. This simple and predictive descriptor links the geometric arrangement of a surface to its adsorption properties. It generates linear adsorption-energy trends, captures finite-size effects, and provides more accurate descriptions than d-band centers and usual coordination numbers. Unlike electronic-structure descriptors, which require knowledge of the densities of states, it is calculated manually. Finally, it was shown that an approximate equivalence exists between generalized coordination numbers and d-band centers., F.C.V., P.S., and D.L. acknowledge EU funding through the PUMA MIND contract (Call FCH‐JU‐2011‐1, Code SP1‐JTI‐FCH‐2011.1.3, Project 303419). We thank IDRIS and CINES (project 609, GENCI/CT8) and PSMN for CPU time and assistance. J.I.M. acknowledges support from CSIC and ESF through the JAEDoc program. J.M.G.L. acknowledges support from MINECO (FIS2012‐30996) and the ReLiable project funded by the DCSR (11‐116792).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila Peter|||0000-0001-8503-3837
  • D'Elia, Gaia
  • Roda Serrat, Vicente
The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of an adaptive extremum seeking algorithm for hydrogen minimization in PEM fuel cell based systems

  • Kunusch, Cristian
  • Castaños Luna, Fernando
This work presents initial experimental results of an adaptive sliding-mode extremum seeker that minimizes the hydrogen consumption in a fuel cell based system. The extremum seeker is based on the classical steepest-descent method, the main challenge being the fact that the gradient of the objective function is unknown. The gradient is estimated by means of a sliding-mode adaptive estimator. The strategy is applied in experimental practical situations in a fuel cell test bench, this allows to asses the performance of the scheme as well as the difficulties that arise in real applications, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter nonlinear state observer with unmatched disturbance estimation for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
In this paper a nonlinear state observer based on a distributed parameter model is proposed for a proton exchange membrane fuel cell (PEMFC). The estimation technique is implemented using a model-based nonlinear observer with a nonlinear disturbance observer in parallel. To implement the model, a finite element discretisation is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the observer synthesis procedure. By means of this double observation technique it is possible to reconstruct the gases concentrations internal states in the gas channels of the PEMFC in the presence of disturbances. The reaction rates and water transport terms that cross the membrane are considered as unknown unmatched disturbances of the model, henceforth the implementation of a disturbance observer to estimate them. Simulation results of the proposed solution are provided and discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control de temperatura en pilas de combustible tipo PEM de cátodo abierto

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Riera, Jordi (Riera Colomer)
  • Costa Castelló, Ramon|||0000-0003-2553-5901
En este trabajo se analiza el modelo de una pila de combustible tipo PEM de cátodo abierto. Se caracterizan sus puntos de equilibrio. Se analiza el plano de fase del modelo alrededor de diferentes puntos de operación y se plantea una linearización del comportamiento del sistema. Finalmente se plantea un diseño basado en control robusto. Este diseño se valida con el modelo completo., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños Luna, Fernando
We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A multi-timescale modeling methodology for PEMFC performance and durability in a virtual fuel cell car

  • Mayur, Manik
  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Bessler, Wolfang G.
The durability of polymer electrolyte membrane fuel cells (PEMFC) is governed by a nonlinear cou-pling between system demand, component behavior, and physicochemical degradation mechanisms, occurring on timescales from the sub-second to the thousand-hour. We present a simulation methodol-ogy for assessing performance and durability of a PEMFC under automotive driving cycles. The simu-lation framework consists of (a) a fuel cell car model converting velocity to cell power demand, (b) a 2D multiphysics cell model, (c) a flexible degradation library template that can accommodate physi-cally-based component-wise degradation mechanisms, and (d) a time-upscaling methodology for ex-trapolating degradation during a representative load cycle to multiple cycles. The computational framework describes three different time scales, (1) sub-second timescale of electrochemistry, (2) minute-timescale of driving cycles, and (3) thousand-hour-timescale of cell ageing. We demonstrate an exemplary PEMFC durability analysis due to membrane degradation under a highly transient load-ing of the New European Driving Cycle (NEDC)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, Michel
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Riera, Jordi (Riera Colomer)
  • Serra, Maria|||0000-0002-9885-8093
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles|||0000-0002-6088-6187
  • Serra, Maria|||0000-0002-9885-8093
  • Massana Hugas, Immaculada|||0000-0002-1089-4525
This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault-tolerant unfalsified control for PEM fuel cell systems

  • Bianchi, Fernando Daniel|||0000-0001-7332-6501
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Kunusch, Cristian
  • Sánchez Peña, Ricardo Salvador
The article addresses the implementation of a data-driven control strategy in a real test bench based on proton exchange membrane fuel cells (PEMFCs). The proposed control scheme is based on Unfalsified Control (UC), which allows adapting in real-time the control law by evaluating the performance specifications based only on measured input-output data. This approach is especially suitable to deal with non-linearity, model uncertainty and also possible faults that may occur in PEMFCs. The control strategy has been applied to several experimental practical situations in order to evaluate not only the system performance but also different fault scenarios. The experimental results have shown the effectiveness of the proposed approach to regulate the oxygen stoichiometry in real-time operation as well as to maintain a proper system performance under fault situations. Also, a start-up mass-flow controller is added in order to bring the system towards its normal operating conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work.// Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno Pérez, Jaime
  • Angulo, M.
In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles|||0000-0002-6088-6187
  • Massana Hugas, Immaculada|||0000-0002-1089-4525
  • Serra, Maria|||0000-0002-9885-8093
Distributed parameter modeling is required to accurately consider space variations, which are important regarding the performance and durability of the Proton Exchange Membrane Fuel Cells (PEMFC) [1-3]. However, the number of differential and algebraic equations (DAE) obtained from the discretization of a set of partial differential equations (PDE) is very large, and this not only slows down the numerical simulations, but also complicates the design of online model-based controllers. The inclusion of complex DAE models within model-based control schemes requires a previous simplification. A method to simplify complex models consists of reducing the order while preserving the relationship between certain input and output variables, determined from the control objectives. These Model Order Reduction (MOR) techniques have been extended to DAE systems [4]. This work focuses on obtaining an order reduced model, from a PEMFC anode gas channel PDE model, which incorporates the effects of distributed parameters that are relevant for the proper functioning and performance of PEMFC. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply MOR techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear PDE model.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ditherless extremum seeking for hydrogen minimization in PEM fuel cells

  • Castaños Luna, Fernando
  • Kunusch, Cristian
This paper presents a nonsmooth adaptive extremum seeker that minimizes the hydrogen consumption in a fuel-cell system. The extremum seeker operates by estimating the gradient of the objective function but, unlike other seekers, it does not require a dither signal to produce such estimate. The absence of a dither signal simplifies the choice of parameter values for the seeker, and more importantly, it allows it to converge to the optimal value exactly, not only to a small neighborhood. The proper functioning of the proposed scheme is proved using non-smooth Lyapunov analysis. The strategy is tested on the input–output map of a real polymer electrolyte fuel cells., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas Fernández, José David
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Kunusch, Cristian
In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: a comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Husar, Attila Peter|||0000-0001-8503-3837
The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental study of hydrogen purge effects on performance and efficiency of an open-cathode proton exchange membrane fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Riera, Jordi (Riera Colomer)
The performance and efficiency of an open-cathode PEM fuel cell system in dead-ended anode (DEA) configuration and hydrogen purges is analyzed in this work. Excess water and crossed-over nitrogen in the anode decrease the hydrogen concentration at the catalyst surface, which in turn causes performance losses. Purging the anode with hydrogen removes water and nitrogen and thus recovers the performance. However, this means wasting hydrogen and decreasing overall system efficiency. Gas chromatography was used to detect and quantify the accumulated nitrogen in the anode during DEA operation. The experiments show that the major performance limitation in the studied system is related to water instead of nitrogen. Moreover, oxygen was detected in the anode exhaust gas after long purge intervals, which is an indicator for corrosion of the cathode carbon support structure. Experimental observations revealed that the need for a hydrogen purge strongly depends on the operating conditions and the state-of-health of the fuel cell. It is shown that flooding on the anode and drying of the cathode catalyst layer may occur simultaneously during purged operation. Therefore, purge decisions must be evaluated online, depending on the operating conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems : a sliding mode approach

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear distributed parameter observer design for fuel cell systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
This paper presents the development of a nonlinear state observer to estimate the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell energy system. The selection of the estimated states follows functionality and fuel cell performance criteria. The implementation is based on the finite element discretisation of a fuel cell distributed parameter model. Forward and backwards discretisation of the partial derivative equations is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the synthesis procedure of the observer. A second-order sliding-mode super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. The sliding-mode control approach grants a suitable corrective action without incrementing the model-dependency of the observer. Simulation results are presented to show the performance of the proposed observer of the fuel cell internal states and to extract conclusions for future research work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria|||0000-0002-9885-8093
  • Batlle Arnau, Carles|||0000-0002-6088-6187
In this work, a simulation tool for proton exchange membrane fuel cells (PEMFC) has been developed, based on a distributed parameter model. The tool is designed to perform studies of time and space variations in the direction of the gas channels. Results for steady-state and dynamic simulations for a single cell of one channel are presented and analyzed. Considered variables are concentrations of reactants, pressures, temperatures, humidification, membrane water content, current density, among others that have significant effects on the performance and durability of PEMFC. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cells

  • Bianchi, Fernando Daniel|||0000-0001-7332-6501
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC) facing oxygen stoichiometry regulation. In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFC systems present highly nonlinear behaviors that demand nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. The control strategy is applied to a couple of experimental practical situations in a laboratory fuel cell system, to evaluate not only the performance but also the difficulties that can arise in real applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Tesis doctoral (DoctoralThesis)

Experimental and model-based analysis for performance and durability improvement of PEM fuel cells

  • Strahl, Stephan
Tesi per compendi de publicacions. La consulta íntegra de la tesi, inclosos els articles no comunicats públicament per drets d'autor es pot realitzar, prèvia petició, a l'Arxiu de la UPC, Increasing global energy demand, growing carbon emissions and the depletion of fossil fuel sources are some of the most important driving forces for the development of sustainable energy solutions. Proton Exchange Membrane (PEM) fuel cells have been demonstrated to be a potential candidate for clean energy conversion in a wide range of applications reaching from highly dynamic transportation systems to stationary systems. Despite their benefits, such as high efficiency and wide operating range, PEM fuel cells must still meet or exceed the technological advantages, such as durability and cost, of conventional power systems in order to be truly competitive. Thus, current research is focused on improving these aspects. This doctoral thesis combines experimental and model-based studies in order to improve performance and durability of PEM fuel cells, that work without external humidification, as demanded by recent government-supported research programs. Improved performance and durability can be obtained by proper system control. The key factor for the development of successful control strategies is adequate thermal and water management considering their interconnections. Therefore, this work investigates the important links between performance, efficiency and lifetime with respect to fuel cell temperature and humidification. The experimental evaluation of temperature-related and purge-related effects shows the great potential of improving the system performance by proper thermal management. In-situ and ex-situ experiments, such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), gas chromatography (GC), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM) were utilized in order to explore short-term and long-term effects of operation modes on performance and durability. To provide a better understanding of the experimentally observed phenomena and their different dynamics with respect to the development of efficient controllers, mathematical models have been derived. The dynamic models allow for relating electrode structure to the cell voltage transient behavior during changes in fuel cell temperature and humidification, including important phase change and ionomer sorption dynamics of water. The experimentally validated, model-based analysis provides recommendations of proper operating conditions and catalyst structure, such as optimal fuel cell temperature and adequate pore-size-distribution, in order to improve the PEM fuel cell performance. The modular character and inherent adaptability of the models has been successfully demonstrated in the study of water transport in a high temperature PEM fuel cell stack. It is shown how mathematical modeling can improve the interpretation of experimental results and provide insight into experimentally non-observable interactions. In conclusion, the presented laboratory and model-based work, including the developed experimental and mathematical tools, contribute to current international research targets for advancing sustainable energy solutions., La creciente demanda mundial de energía, el crecimiento de las emisiones de dióxido de carbono y el agotamiento de las fuentes de combustible fósiles son algunos de los factores más importantes para el desarrollo de soluciones basadas en energies sostenibles. Las pilas de combustible de tipo Proton Exchange Membrane (PEM) han demostrado ser un candidato potencial para la conversión limpia de la energía en una extensa gama de aplicaciones, desde los sistemas de transporte altamente dinámicos hasta sistemas estacionarios. No obstante sus beneficios, tales como una alta eficiencia y un amplio rango de operación, las pilas de combustible PEM todavía deben cumplir o superar las ventajas tecnológicas de los sistemas de energía convencionales, como son su durabilidad y coste, con el fin de ser verdaderamente competitivas. Por lo tanto, la investigación actual se centra en la mejora de estos aspectos. Esta tesis doctoral combina estudios experimentales y estudios basados en modelos físicos con el fin de mejorar el rendimiento y la durabilidad de las pilas de combustible PEM que trabajan sin humidificación externa, tal y como exigen recientes programas de investigación apoyados por los gobiernos. La mejora del rendimiento y de la durabilidad se puede obtener por control apropiado del sistema. El factor clave para el desarrollo de estrategias de control exitosas es la gestión adecuada de la temperatura y del agua y sus interconexiones. Por lo tanto, este trabajo investiga los vínculos importantes entre el rendimiento, la eficiencia y la vida útil con respecto a la temperatura de la pila de combustible y su humidificación. La evaluación experimental de los efectos relacionados con la temperatura y las purgas de hidrógeno muestra el gran potencial para mejorar el rendimiento del sistema pila mediante una gestión térmica adecuada. En esta tesis se emplean experimentos in-situ y ex-situ, tales como la espectroscopía electroquímica de impedancia (EIS), la voltametría cíclica (CV), la cromatografía de gases (CG), la espectroscopia de fotoelectrones emitidos por rayos X (XPS), la difracción de rayos X (XRD) y la microscopía electrónica de barrido (SEM) con el fin de explorar los efectos a corto plazo y a largo plazo de los modos de operación sobre el rendimiento y la durabilidad de una pila PEM. Para proporcionar una mejor comprensión de los fenómenos observados experimentalmente y sus diferentes dinámicas para el correcto desarrollo de controladores eficientes, se derivan modelos matemáticos dinámicos. Los modelos permiten relacionar la estructura de los electrodos con el comportamiento transitorio del voltaje durante los cambios de temperatura y de humidificación de la pila de combustible, incluyendo las dinámicas importantes del cambio de fase y de adsorción y desorción del agua. El análisis basado en modelos validados experimentalmente proporciona recomendaciones de las condiciones de funcionamiento y de la estructura del catalizador, tales como la temperatura óptima y la distribución de tamaño de poros apropiada, con el fin de mejorar el rendimiento de la pila de combustible PEM. El carácter modular y la adaptabilidad inherente de los modelos propuestos se demuestra con éxito en el estudio de transporte de agua en un stack de pilas de combustible PEM de alta temperatura. Se muestra como el modelado matemático puede mejorar la interpretación de los resultados experimentales y proporcionar información sobre las interacciones que experimentalmente no son observables. En conclusión, el trabajo de laboratorio y el basado en modelos que se presenta en esta tesis doctoral, incluyendo las herramientas experimentales y matemáticas desarrolladas, contribuyen a la consecución de los actuales objetivos internacionales de investigación que deben permitir aportar mejoras en las soluciones basadas en energías sostenibles.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Control-oriented thermal modeling methodology for water-cooled PEM fuel-cell-based systems

  • Rojas Fernández, José David
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
In this paper, a new control-oriented modeling methodology for the thermal dynamics of water-cooled Proton Exchange Membrane Fuel Cells (PEMFCs) is presented and validated. This methodology is not only useful for control applications, but also can be used for predicting the temperature variation across the stack, allowing to monitor its operation. The methodology has been validated in a real 600-W, 20-cells, water cooled PEMFC, with encouraging results for both the stationary and the transient states. Results show that the proposed methodology is accurate and suitable for control purposes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance and degradation of proton exchange membrane fuel cells: State of the art in modeling from atomistic to system scale

  • Jahnke, T.
  • Futter, G.
  • Latz, A.
  • Serra, Maria|||0000-0002-9885-8093
Proton Exchange Membrane Fuel Cells (PEMFC) are energy efficient and environmentally friendly alternatives to conventional energy conversion systems in many yet emerging applications. In order to enable prediction of their performance and durability, it is crucial to gain a deeper understanding of the relevant operation phenomena, e.g., electrochemistry, transport phenomena, thermodynamics as well as the mechanisms leading to the degradation of cell components. Achieving the goal of providing predictive tools to model PEMFC performance, durability and degradation is a challenging task requiring the development of detailed and realistic models reaching from the atomic/molecular scale over the meso scale of structures and materials up to components, stack and system level. In addition an appropriate way of coupling the different scales is required.
UPCommons. Portal del coneixement obert de la UPC
Publicación Proyecto fin de carrera (BachelorThesis)

Characterization of voltage loss for proton exchange membrane fuel cell

  • Elia, Gaia'd
Les piles de combustible són, cada dia més, una alternativa als clàssics vectors energètics. La utilització de l’hidrogen com a font energètica suposa una important reducció d’emissions i costos, tot i que la tecnologia es encara massa cara per entrar en competició directa amb fonts i vectors energètics tradicionals. En aquest context es desenvolupa aquesta tesis, més en concret, en el marc del programa PUMA MIND, un programa d’investigació europeu que cerca optimitzar el funcionament de les piles de combustible de membrana polimèrica (PEM) i reduir-ne els costos associats per aplicacions en el sector de l’automoció. El treball es centra en la consolidació i reproducció de mètodes d’identificació i caracterització de les pèrdues de voltatge i els seus indicadors associats a partir de dades experimentals obtingudes al laboratori de piles de l’Institut de Robòtica i Informàtica Industrial (UPC – CSIC). Especialment interessant és l’estudi de la variació de la densitat de corrent d’intercanvi al càtode, relacionada amb les pèrdues de concentració d’oxigen a la capa catalitzadora del càtode. A més a més, aquestes dades experimental es poden utilitzar per validar models fluidodinàmics computacionals, tasca que s’inicia en aquest PFG i es continuarà en futurs estudis.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria|||0000-0002-9885-8093
  • Batlle Arnau, Carles|||0000-0002-6088-6187
En este trabajo se ha desarrollado una herramienta de simulación para pilas de combustible tipo PEM, basada en un modelo de parámetros distribuidos. La herramienta está diseñada para realizar estudios de variaciones espaciales y temporales a lo largo de los canales de alimentación de reactantes. El trabajo muestra y analiza los resultados de simulación de una monocelda monocanal. Las variables estudiadas son las concentraciones de los reactantes, presiones, temperaturas, humidificación, contenido de agua de la membrana, corriente, entre otras que influyen significativamente sobre el rendimiento y durabilidad de las pilas PEM., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cell systems

  • Bianchi, Fernando Daniel|||0000-0001-7332-6501
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC). In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFCs present a highly nonlinear behavior that demands nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. In order to deal with the saturation of the control action, an LPV anti-windup compensation is also proposed. The complete control strategy is applied to several experimental practical situations in a laboratory fuel cell system to evaluate its performance and the reliability of the proposed algorithms., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Husar, Attila Peter|||0000-0001-8503-3837
The well-known challenges to overcome in PEM fuel cell research are their relatively low durability and the high costs for the platinum catalysts. This work focuses on degradation mechanisms that are present in open-cathode PEM fuel cell systems and their links to the decaying fuel cell performance. Therefore a degraded, open-cathode, 20 cell, PEM fuel cell stack was analyzed by means of in-situ and ex-situ techniques. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometry show that degradation affects individual cells quite differently towards the end of life of the stack. Cells located close to the endplates of the stack show the biggest performance decay. Electrochemical impedance spectroscopy (EIS) data present non-reversible catalyst layer degradation but negligible membrane degradation of several cells. Post-mortem, ex-situ experiments, such as cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) show a significant active area loss of the first cells within the stack due to Pt dissolution, oxidation and agglomeration. Scanning electron microscope (SEM) images of the degraded cells in comparison with the normally working cells in the stack show severe carbon corrosion of the cathode catalyst layers., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

  • Luna Pacho, Julio Alberto
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
  • Hissel, Daniel
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Electrode structure effects on the performance of open-cathode proton exchange membrane fuel cells: A multiscale modeling approach

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Franco, Alejandro A.
In this paper we present a new dynamic multiscale model of an open-cathode Polymer Electrolyte Membrane Fuel Cell (PEMFC). The model describes two-phase water transport, electrochemistry and thermal management within a framework that combines a Computational Fluid Dynamics (CFD) approach with a micro-structurally-resolved model predicting the water filling dynamics of the electrode pores and the impact of these dynamics on the evolution of the electrochemically active surface area (ECSA). The model allows relating for the first time the cathode electrode structure to the cell voltage transient behavior during experimental changes in fuel cell temperature. The effect of evaporation rates, desorption rates and temperature changes on the performance of four different electrode pore size distributions are explored using steady-state and transient numerical simulations. The results are discussed with respect to water management and temperature control. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi
  • Husar, Attila Peter
The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: a comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
© <year>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria
  • Batlle Arnau, Carles
En este trabajo se ha desarrollado una herramienta de simulación para pilas de combustible tipo PEM, basada en un modelo de parámetros distribuidos. La herramienta está diseñada para realizar estudios de variaciones espaciales y temporales a lo largo de los canales de alimentación de reactantes. El trabajo muestra y analiza los resultados de simulación de una monocelda monocanal. Las variables estudiadas son las concentraciones de los reactantes, presiones, temperaturas, humidificación, contenido de agua de la membrana, corriente, entre otras que influyen significativamente sobre el rendimiento y durabilidad de las pilas PEM., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno Pérez, Jaime
  • Angulo, M.
In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila Peter
  • D'Elia, Gaia
  • Roda Serrat, Vicente
The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear distributed parameter observer design for fuel cell systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter
  • Serra, Maria
This paper presents the development of a nonlinear state observer to estimate the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell energy system. The selection of the estimated states follows functionality and fuel cell performance criteria. The implementation is based on the finite element discretisation of a fuel cell distributed parameter model. Forward and backwards discretisation of the partial derivative equations is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the synthesis procedure of the observer. A second-order sliding-mode super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. The sliding-mode control approach grants a suitable corrective action without incrementing the model-dependency of the observer. Simulation results are presented to show the performance of the proposed observer of the fuel cell internal states and to extract conclusions for future research work., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter
  • Serra, Maria
This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work.// Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi
  • Husar, Attila Peter
The well-known challenges to overcome in PEM fuel cell research are their relatively low durability and the high costs for the platinum catalysts. This work focuses on degradation mechanisms that are present in open-cathode PEM fuel cell systems and their links to the decaying fuel cell performance. Therefore a degraded, open-cathode, 20 cell, PEM fuel cell stack was analyzed by means of in-situ and ex-situ techniques. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometry show that degradation affects individual cells quite differently towards the end of life of the stack. Cells located close to the endplates of the stack show the biggest performance decay. Electrochemical impedance spectroscopy (EIS) data present non-reversible catalyst layer degradation but negligible membrane degradation of several cells. Post-mortem, ex-situ experiments, such as cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) show a significant active area loss of the first cells within the stack due to Pt dissolution, oxidation and agglomeration. Scanning electron microscope (SEM) images of the degraded cells in comparison with the normally working cells in the stack show severe carbon corrosion of the cathode catalyst layers., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas Fernández, José David
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, Michel
  • Husar, Attila Peter
  • Riera, Jordi (Riera Colomer)
  • Serra, Maria
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria
  • Batlle Arnau, Carles
In this work, a simulation tool for proton exchange membrane fuel cells (PEMFC) has been developed, based on a distributed parameter model. The tool is designed to perform studies of time and space variations in the direction of the gas channels. Results for steady-state and dynamic simulations for a single cell of one channel are presented and analyzed. Considered variables are concentrations of reactants, pressures, temperatures, humidification, membrane water content, current density, among others that have significant effects on the performance and durability of PEMFC. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fault-tolerant unfalsified control for PEM fuel cell systems

  • Bianchi, Fernando Daniel
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
  • Sánchez Peña, Ricardo Salvador
The article addresses the implementation of a data-driven control strategy in a real test bench based on proton exchange membrane fuel cells (PEMFCs). The proposed control scheme is based on Unfalsified Control (UC), which allows adapting in real-time the control law by evaluating the performance specifications based only on measured input-output data. This approach is especially suitable to deal with non-linearity, model uncertainty and also possible faults that may occur in PEMFCs. The control strategy has been applied to several experimental practical situations in order to evaluate not only the system performance but also different fault scenarios. The experimental results have shown the effectiveness of the proposed approach to regulate the oxygen stoichiometry in real-time operation as well as to maintain a proper system performance under fault situations. Also, a start-up mass-flow controller is added in order to bring the system towards its normal operating conditions., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles
  • Massana Hugas, Immaculada
  • Serra, Maria
Distributed parameter modeling is required to accurately consider space variations, which are important regarding the performance and durability of the Proton Exchange Membrane Fuel Cells (PEMFC) [1-3]. However, the number of differential and algebraic equations (DAE) obtained from the discretization of a set of partial differential equations (PDE) is very large, and this not only slows down the numerical simulations, but also complicates the design of online model-based controllers. The inclusion of complex DAE models within model-based control schemes requires a previous simplification. A method to simplify complex models consists of reducing the order while preserving the relationship between certain input and output variables, determined from the control objectives. These Model Order Reduction (MOR) techniques have been extended to DAE systems [4]. This work focuses on obtaining an order reduced model, from a PEMFC anode gas channel PDE model, which incorporates the effects of distributed parameters that are relevant for the proper functioning and performance of PEMFC. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply MOR techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear PDE model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cell systems

  • Bianchi, Fernando Daniel
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC). In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFCs present a highly nonlinear behavior that demands nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. In order to deal with the saturation of the control action, an LPV anti-windup compensation is also proposed. The complete control strategy is applied to several experimental practical situations in a laboratory fuel cell system to evaluate its performance and the reliability of the proposed algorithms., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrode structure effects on the performance of open-cathode proton exchange membrane fuel cells: A multiscale modeling approach

  • Strahl, Stephan
  • Husar, Attila Peter
  • Franco, Alejandro A.
In this paper we present a new dynamic multiscale model of an open-cathode Polymer Electrolyte Membrane Fuel Cell (PEMFC). The model describes two-phase water transport, electrochemistry and thermal management within a framework that combines a Computational Fluid Dynamics (CFD) approach with a micro-structurally-resolved model predicting the water filling dynamics of the electrode pores and the impact of these dynamics on the evolution of the electrochemically active surface area (ECSA). The model allows relating for the first time the cathode electrode structure to the cell voltage transient behavior during experimental changes in fuel cell temperature. The effect of evaporation rates, desorption rates and temperature changes on the performance of four different electrode pore size distributions are explored using steady-state and transient numerical simulations. The results are discussed with respect to water management and temperature control. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Control-oriented thermal modeling methodology for water-cooled PEM fuel-cell-based systems

  • Rojas Fernández, José David
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Puig Cayuela, Vicenç
In this paper, a new control-oriented modeling methodology for the thermal dynamics of water-cooled Proton Exchange Membrane Fuel Cells (PEMFCs) is presented and validated. This methodology is not only useful for control applications, but also can be used for predicting the temperature variation across the stack, allowing to monitor its operation. The methodology has been validated in a real 600-W, 20-cells, water cooled PEMFC, with encouraging results for both the stationary and the transient states. Results show that the proposed methodology is accurate and suitable for control purposes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños Luna, Fernando
We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems : a sliding mode approach

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A multi-timescale modeling methodology for PEMFC performance and durability in a virtual fuel cell car

  • Mayur, Manik
  • Strahl, Stephan
  • Husar, Attila Peter
  • Bessler, Wolfang G.
The durability of polymer electrolyte membrane fuel cells (PEMFC) is governed by a nonlinear cou-pling between system demand, component behavior, and physicochemical degradation mechanisms, occurring on timescales from the sub-second to the thousand-hour. We present a simulation methodol-ogy for assessing performance and durability of a PEMFC under automotive driving cycles. The simu-lation framework consists of (a) a fuel cell car model converting velocity to cell power demand, (b) a 2D multiphysics cell model, (c) a flexible degradation library template that can accommodate physi-cally-based component-wise degradation mechanisms, and (d) a time-upscaling methodology for ex-trapolating degradation during a representative load cycle to multiple cycles. The computational framework describes three different time scales, (1) sub-second timescale of electrochemistry, (2) minute-timescale of driving cycles, and (3) thousand-hour-timescale of cell ageing. We demonstrate an exemplary PEMFC durability analysis due to membrane degradation under a highly transient load-ing of the New European Driving Cycle (NEDC)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles
  • Serra, Maria
  • Massana Hugas, Immaculada
This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cells

  • Bianchi, Fernando Daniel
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC) facing oxygen stoichiometry regulation. In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFC systems present highly nonlinear behaviors that demand nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. The control strategy is applied to a couple of experimental practical situations in a laboratory fuel cell system, to evaluate not only the performance but also the difficulties that can arise in real applications., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Proyecto fin de carrera (BachelorThesis)

Characterization of voltage loss for proton exchange membrane fuel cell

  • Elia, Gaia'd
Les piles de combustible són, cada dia més, una alternativa als clàssics vectors energètics. La utilització de l’hidrogen com a font energètica suposa una important reducció d’emissions i costos, tot i que la tecnologia es encara massa cara per entrar en competició directa amb fonts i vectors energètics tradicionals. En aquest context es desenvolupa aquesta tesis, més en concret, en el marc del programa PUMA MIND, un programa d’investigació europeu que cerca optimitzar el funcionament de les piles de combustible de membrana polimèrica (PEM) i reduir-ne els costos associats per aplicacions en el sector de l’automoció. El treball es centra en la consolidació i reproducció de mètodes d’identificació i caracterització de les pèrdues de voltatge i els seus indicadors associats a partir de dades experimentals obtingudes al laboratori de piles de l’Institut de Robòtica i Informàtica Industrial (UPC – CSIC). Especialment interessant és l’estudi de la variació de la densitat de corrent d’intercanvi al càtode, relacionada amb les pèrdues de concentració d’oxigen a la capa catalitzadora del càtode. A més a més, aquestes dades experimental es poden utilitzar per validar models fluidodinàmics computacionals, tasca que s’inicia en aquest PFG i es continuarà en futurs estudis.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., Peer Reviewed, Postprint (author's final draft)