Pasar al contenido principal

DESARROLLO DE SISTEMAS DE CONTROL PARA LA MEJORA DE LA EFICIENCIA Y LA VIDA UTIL EN SISTEMAS BASADOS EN PILAS DE COMBUSTIBLE PEM

DPI2011-25649

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control difuso para el seguimiento de guiñada del AUV Cormorán, Fuzzy control for yaw tracking of Cormoran AUV

  • González, Julián
  • Gomáriz, Spartacus
  • Batlle, Carles
[ES] En este trabajo se presenta en detalle el diseño de un control difuso para el seguimiento de guiñada de un vehículo autónomo submarino. Este control está desarrollado a partir de la descripción matemática del modelo hidrodinámico del vehículo, que se estudia y discute bajo diferentes situaciones de velocidad de avance o cambios en la referencia de guiñada. Se linealiza el modelo matemático y se estudian diferentes controles lineales que son diseñados para actuar en situaciones concretas, de forma que el control difuso se encargue de manejar dichos controles de manera global., [EN] This work presents in detail the fuzzy control design for yaw tracking of an autonomous underwater vehicle. This control has been developed from the mathematical description of the hydrodynamic model of the vehicle, which is studied and discussed from different situations both in surge velocity as in changes in yaw reference. The model is linearized and several linear controls are designed for their actuation at certain situations, in a way that the fuzzy control allows to handle those controls globally., Este trabajo ha sido financiado por el Ministerio de Educacion y Ciencia de España y la Unión Europea (FEDER), proyectos CGL2013-42557-R y DPI2011-25649.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear model predictive control methodology for efficiency and durability improvement in a fuel cell power system

  • Luna Pacho, Julio Alberto
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
The main contribution of this work is the improvement of the efficiency of a PEMFC power system while guaranteeing conditions that also improve its durability. Adopting the NMPC scheme with the distributed parameter model and the nonlinear observer, the efficiency of the PEMFC-based system can be maximized guaranteeing at the same time the appropriate internal gas concentration profiles to avoid global and local hydrogen and oxygen starvation and proper membrane humidification., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Middleware for plug and play integration of heterogeneous sensor resources into the sensor web

  • Martínez Padró, Enoc|||0000-0003-1233-7105
  • Toma, Daniel|||0000-0003-0472-1190
  • Jirka, Simon
  • Río Fernández, Joaquín del|||0000-0002-6191-2201
The study of global phenomena requires the combination of a considerable amount of data coming from different sources, acquired by different observation platforms and managed by institutions working in different scientific fields. Merging this data to provide extensive and complete data sets to monitor the long-term, global changes of our oceans is a major challenge. The data acquisition and data archival procedures usually vary significantly depending on the acquisition platform. This lack of standardization ultimately leads to information silos, preventing the data to be effectively shared across different scientific communities. In the past years, important steps have been taken in order to improve both standardization and interoperability, such as the Open Geospatial Consortium’s SensorWeb Enablement (SWE) framework. Within this framework, standardized models and interfaces to archive, access and visualize the data from heterogeneous sensor resources have been proposed. However, due to the wide variety of software and hardware architectures presented by marine sensors and marine observation platforms, there is still a lack of uniform procedures to integrate sensors into existing SWE-based data infrastructures. In this work, a framework aimed to enable sensor plug and play integration into existing SWE-based data infrastructures is presented. First, an analysis of the operations required to automatically identify, configure and operate a sensor are analysed. Then, the metadata required for these operations is structured in a standard way. Afterwards, a modular, plug and play, SWE-based acquisition chain is proposed. Finally different use cases for this framework are presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Micro-scale continuous and discrete numerical models for nonlinear analysis of masonry shear walls

  • Petracca, Massimo
  • Pelà, Luca|||0000-0001-7760-8290
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Zaghi, Stefano
  • Camata, Guido
  • Spacone, Enrico
A novel damage mechanics-based continuous micro-model for the analysis of masonry-walls is presented and compared with other two well-known discrete micro-models. The discrete micro-models discretize masonry micro-structure with nonlinear interfaces for mortar-joints, and continuum elements for units. The proposed continuous micro-model discretizes both units and mortar-joints with continuum elements, making use of a tension/compression damage model, here refined to properly reproduce the nonlinear response under shear and to control the dilatancy. The three investigated models are validated against experimental results. They all prove to be similarly effective, with the proposed model being less time-consuming, due to the efficient format of the damage model. Critical issues for these types of micro-models are analysed carefully, such as the accuracy in predicting the failure load and collapse mechanism, the computational efficiency and the level of approximation given by a 2D plane-stress assumption., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Control-oriented thermal modeling methodology for water-cooled PEM fuel-cell-based systems

  • Rojas Fernández, José David
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
In this paper, a new control-oriented modeling methodology for the thermal dynamics of water-cooled Proton Exchange Membrane Fuel Cells (PEMFCs) is presented and validated. This methodology is not only useful for control applications, but also can be used for predicting the temperature variation across the stack, allowing to monitor its operation. The methodology has been validated in a real 600-W, 20-cells, water cooled PEMFC, with encouraging results for both the stationary and the transient states. Results show that the proposed methodology is accurate and suitable for control purposes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance and degradation of proton exchange membrane fuel cells: State of the art in modeling from atomistic to system scale

  • Jahnke, T.
  • Futter, G.
  • Latz, A.
  • Serra, Maria|||0000-0002-9885-8093
Proton Exchange Membrane Fuel Cells (PEMFC) are energy efficient and environmentally friendly alternatives to conventional energy conversion systems in many yet emerging applications. In order to enable prediction of their performance and durability, it is crucial to gain a deeper understanding of the relevant operation phenomena, e.g., electrochemistry, transport phenomena, thermodynamics as well as the mechanisms leading to the degradation of cell components. Achieving the goal of providing predictive tools to model PEMFC performance, durability and degradation is a challenging task requiring the development of detailed and realistic models reaching from the atomic/molecular scale over the meso scale of structures and materials up to components, stack and system level. In addition an appropriate way of coupling the different scales is required.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fast model predictive control for hydrogen outflow regulation in ethanol steam reformers

  • Torchio, M.
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Magni, L.
  • Serra, Maria|||0000-0002-9885-8093
  • Braatz, R. D.
  • Raimondo, D. M.
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the recent years, the presence of alternative power sources, such as solar panels, wind farms, hydropumps and hydrogen-based devices, has significantly increased. The reasons of this trend are clear: contributing to a reduction of gas emissions and dependency on fossil fuels. Hydrogen-based devices are of particular interest due to their significant efficiency and reliability. Reforming technologies are among the most economic and efficient ways of producing hydrogen. In this paper we consider the regulation of hydrogen outflow in an ethanol steam reformer (ESR). In particular, a fast model predictive control approach based on a finite step response model of the process is proposed. Simulations performed using a more realistic non-linear model show the effectiveness of the proposed approach in driving the ESR to different operating conditions while fulfilling input and output constraints., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of Optimal Control Approaches for Predicting Active Knee-Ankle-Foot-Orthosis Motion for Individuals With Spinal Cord Injury

  • Febrer Nafría, Miriam|||0000-0002-1189-835X
  • Fregly, Benjamin Jon
  • Font Llagunes, Josep Maria|||0000-0002-7192-2980
Gait restoration of individuals with spinal cord injury can be partially achieved using active orthoses or exoskeletons. To improve the walking ability of each patient as much as possible, it is important to personalize the parameters that define the device actuation. This study investigates whether using an optimal control-based predictive simulation approach to personalize pre-defined knee trajectory parameters for an active knee-ankle-foot orthosis (KAFO) used by spinal cord injured (SCI) subjects could potentially be an alternative to the current trial-and-error approach. We aimed to find the knee angle trajectory that produced an improved orthosis-assisted gait pattern compared to the one with passive support (locked knee). We collected experimental data from a healthy subject assisted by crutches and KAFOs (with locked knee and with knee flexion assistance) and from an SCI subject assisted by crutches and KAFOs (with locked knee). First, we compared different cost functions and chose the one that produced results closest to experimental locked knee walking for the healthy subject (angular coordinates mean RMSE was 5.74°). For this subject, we predicted crutch-orthosis-assisted walking imposing a pre-defined knee angle trajectory for different maximum knee flexion parameter values, and results were evaluated against experimental data using that same pre-defined knee flexion trajectories in the real device. Finally, using the selected cost function, gait cycles for different knee flexion assistance were predicted for an SCI subject. We evaluated changes in four clinically relevant parameters: foot clearance, stride length, cadence, and hip flexion ROM. Simulations for different values of maximum knee flexion showed variations of these parameters that were consistent with experimental data for the healthy subject (e.g., foot clearance increased/decreased similarly in experimental and predicted motions) and were reasonable for the SCI subject (e.g., maximum parameter values were found for moderate knee flexion). Although more research is needed before this method can be applied to choose optimal active orthosis controller parameters for specific subjects, these findings suggest that optimal control prediction of crutch-orthosis-assisted walking using biomechanical models might be used in place of the trial-and-error method to select the best maximum knee flexion angle during gait for a specific SCI subject., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Nonlinear model predictive control methodology for efficiency and durability improvement in a fuel cell power system

  • Luna Pacho, Julio Alberto
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila Peter
  • Serra, Maria
The main contribution of this work is the improvement of the efficiency of a PEMFC power system while guaranteeing conditions that also improve its durability. Adopting the NMPC scheme with the distributed parameter model and the nonlinear observer, the efficiency of the PEMFC-based system can be maximized guaranteeing at the same time the appropriate internal gas concentration profiles to avoid global and local hydrogen and oxygen starvation and proper membrane humidification., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fast model predictive control for hydrogen outflow regulation in ethanol steam reformers

  • Torchio, M.
  • Ocampo-Martínez, Carlos
  • Magni, L.
  • Serra, Maria
  • Braatz, R. D.
  • Raimondo, D. M.
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the recent years, the presence of alternative power sources, such as solar panels, wind farms, hydropumps and hydrogen-based devices, has significantly increased. The reasons of this trend are clear: contributing to a reduction of gas emissions and dependency on fossil fuels. Hydrogen-based devices are of particular interest due to their significant efficiency and reliability. Reforming technologies are among the most economic and efficient ways of producing hydrogen. In this paper we consider the regulation of hydrogen outflow in an ethanol steam reformer (ESR). In particular, a fast model predictive control approach based on a finite step response model of the process is proposed. Simulations performed using a more realistic non-linear model show the effectiveness of the proposed approach in driving the ESR to different operating conditions while fulfilling input and output constraints., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Micro-scale continuous and discrete numerical models for nonlinear analysis of masonry shear walls

  • Petracca, Massimo
  • Pelà, Luca
  • Rossi, Riccardo
  • Zaghi, Stefano
  • Camata, Guido
  • Spacone, Enrico
A novel damage mechanics-based continuous micro-model for the analysis of masonry-walls is presented and compared with other two well-known discrete micro-models. The discrete micro-models discretize masonry micro-structure with nonlinear interfaces for mortar-joints, and continuum elements for units. The proposed continuous micro-model discretizes both units and mortar-joints with continuum elements, making use of a tension/compression damage model, here refined to properly reproduce the nonlinear response under shear and to control the dilatancy. The three investigated models are validated against experimental results. They all prove to be similarly effective, with the proposed model being less time-consuming, due to the efficient format of the damage model. Critical issues for these types of micro-models are analysed carefully, such as the accuracy in predicting the failure load and collapse mechanism, the computational efficiency and the level of approximation given by a 2D plane-stress assumption., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Control-oriented thermal modeling methodology for water-cooled PEM fuel-cell-based systems

  • Rojas Fernández, José David
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Puig Cayuela, Vicenç
In this paper, a new control-oriented modeling methodology for the thermal dynamics of water-cooled Proton Exchange Membrane Fuel Cells (PEMFCs) is presented and validated. This methodology is not only useful for control applications, but also can be used for predicting the temperature variation across the stack, allowing to monitor its operation. The methodology has been validated in a real 600-W, 20-cells, water cooled PEMFC, with encouraging results for both the stationary and the transient states. Results show that the proposed methodology is accurate and suitable for control purposes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of Optimal Control Approaches for Predicting Active Knee-Ankle-Foot-Orthosis Motion for Individuals With Spinal Cord Injury

  • Febrer Nafría, Miriam
  • Fregly, Benjamin Jon
  • Font Llagunes, Josep Maria
Gait restoration of individuals with spinal cord injury can be partially achieved using active orthoses or exoskeletons. To improve the walking ability of each patient as much as possible, it is important to personalize the parameters that define the device actuation. This study investigates whether using an optimal control-based predictive simulation approach to personalize pre-defined knee trajectory parameters for an active knee-ankle-foot orthosis (KAFO) used by spinal cord injured (SCI) subjects could potentially be an alternative to the current trial-and-error approach. We aimed to find the knee angle trajectory that produced an improved orthosis-assisted gait pattern compared to the one with passive support (locked knee). We collected experimental data from a healthy subject assisted by crutches and KAFOs (with locked knee and with knee flexion assistance) and from an SCI subject assisted by crutches and KAFOs (with locked knee). First, we compared different cost functions and chose the one that produced results closest to experimental locked knee walking for the healthy subject (angular coordinates mean RMSE was 5.74°). For this subject, we predicted crutch-orthosis-assisted walking imposing a pre-defined knee angle trajectory for different maximum knee flexion parameter values, and results were evaluated against experimental data using that same pre-defined knee flexion trajectories in the real device. Finally, using the selected cost function, gait cycles for different knee flexion assistance were predicted for an SCI subject. We evaluated changes in four clinically relevant parameters: foot clearance, stride length, cadence, and hip flexion ROM. Simulations for different values of maximum knee flexion showed variations of these parameters that were consistent with experimental data for the healthy subject (e.g., foot clearance increased/decreased similarly in experimental and predicted motions) and were reasonable for the SCI subject (e.g., maximum parameter values were found for moderate knee flexion). Although more research is needed before this method can be applied to choose optimal active orthosis controller parameters for specific subjects, these findings suggest that optimal control prediction of crutch-orthosis-assisted walking using biomechanical models might be used in place of the trial-and-error method to select the best maximum knee flexion angle during gait for a specific SCI subject., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Middleware for plug and play integration of heterogeneous sensor resources into the sensor web

  • Martínez Padró, Enoc
  • Toma, Daniel
  • Jirka, Simon
  • Río Fernández, Joaquín del
The study of global phenomena requires the combination of a considerable amount of data coming from different sources, acquired by different observation platforms and managed by institutions working in different scientific fields. Merging this data to provide extensive and complete data sets to monitor the long-term, global changes of our oceans is a major challenge. The data acquisition and data archival procedures usually vary significantly depending on the acquisition platform. This lack of standardization ultimately leads to information silos, preventing the data to be effectively shared across different scientific communities. In the past years, important steps have been taken in order to improve both standardization and interoperability, such as the Open Geospatial Consortium’s SensorWeb Enablement (SWE) framework. Within this framework, standardized models and interfaces to archive, access and visualize the data from heterogeneous sensor resources have been proposed. However, due to the wide variety of software and hardware architectures presented by marine sensors and marine observation platforms, there is still a lack of uniform procedures to integrate sensors into existing SWE-based data infrastructures. In this work, a framework aimed to enable sensor plug and play integration into existing SWE-based data infrastructures is presented. First, an analysis of the operations required to automatically identify, configure and operate a sensor are analysed. Then, the metadata required for these operations is structured in a standard way. Afterwards, a modular, plug and play, SWE-based acquisition chain is proposed. Finally different use cases for this framework are presented., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance and degradation of proton exchange membrane fuel cells: State of the art in modeling from atomistic to system scale

  • Jahnke, T.
  • Futter, G.
  • Latz, A.
  • Serra, Maria
Proton Exchange Membrane Fuel Cells (PEMFC) are energy efficient and environmentally friendly alternatives to conventional energy conversion systems in many yet emerging applications. In order to enable prediction of their performance and durability, it is crucial to gain a deeper understanding of the relevant operation phenomena, e.g., electrochemistry, transport phenomena, thermodynamics as well as the mechanisms leading to the degradation of cell components. Achieving the goal of providing predictive tools to model PEMFC performance, durability and degradation is a challenging task requiring the development of detailed and realistic models reaching from the atomic/molecular scale over the meso scale of structures and materials up to components, stack and system level. In addition an appropriate way of coupling the different scales is required., Postprint (author's final draft)