Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a Twisting based algorithm

  • Dòria-Cerezo, Arnau
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Trabajo presentado a la 39th IECON celebrada en Viena del 10 al 13 de noviembre de 2013., This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., This work was supported by the Spanish Government Research Project DPI2010-15110, Project Marie Curie FP7-2011-IIF-299767/911767 ACRES (EU), CONICET and UNLP (Argentina). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct synchronous-asynchronous conversion system for hybrid electrical vehicle applications. An energy-based modeling approach

  • Muñoz-Aguilar, Raúl S.
  • Dòria-Cerezo, Arnau
  • Puleston, Pablo Federico
This paper presents a proposal for a series hybrid electric vehicle propulsion system. This new configuration is based on a wound-rotor synchronous generator (WRSM) and a doubly-fed induction machine (DFIM). The energy-based model of the whole system is obtained taking advantage of the capabilities of the port-based modeling techniques. From the dq port-controlled Hamiltonian description of the WRSM and DFIM, the Hamiltonian model of the proposed Direct Synchronous-Asynchronous Conversion System (DiSAC) is developed. Subsequently, the bond graph models of the DiSAC and associate systems are also provided. Numerical simulations are also presented in order to validate the proposed system. © 2012 Elsevier Ltd. All rights reserved., R. S. Muñoz-Aguilar, A. Dòria-Cerezo and P.F. Puleston were partially supported by the Spanish government research projects ENE2011-29041-C02-01, DPI2010-15110 and Marie Curie FP7-PIIF-911767 (EU), CONICET and UNLP (Argentina), respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila
  • Puleston, Pablo Federico
  • Riera, Jordi
Paper presented at the “Fundamentals & Developments of Fuel Cells Conference 2013 (FDFC2013)”, April 16–18, 2013, Karlsruhe, Germany., The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., This work is partially funded by the national project MICINN DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419. The work of P. Puleston was supported by CONICET and UNLP (Argentina), as well as Marie Curie FP7-2011-IIF, ACRES (299767/911767) (EU). Finally, the authors highly appreciate the support of the LEICI and the UNLP in enabling a research stay of S. Strahl at the laboratory in La Plata., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Presentado a la XV Reunión de Trabajo en Procesamiento de la Informnación y Control celebrada en Argentina del 16 al 20 de septiembre de 2013., En este trabajo se presenta el diseño de un controlador para maximizar la eficiencia de una pila de combustible, en base a un algoritmo Super-twisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Este trabajo fue realizado con el apoyo de la UNLP, CONICET, y SECyT, de Argentina; y del FP7-PEOPLE-2011 Marie-Curie Action, Proyectos IIF-ACRES (299767/911767) y (GA: PCIG09-GA-2011-293876), de la Unión Europea, los proyectos Puma-Mind (GA: FCH-JU-2011-1-303419) y CICYT DPI2011-25649 (MINECO-España) y el programa JAE-DOC del CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • Moré, Jerónimo J.
  • Puleston, Pablo Federico
  • Kunusch, Cristian
  • Allué, Miguel
This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., This research was supported by the Universidad Nacional de La Plata, CONICET, and SECyT, from Argentina; by FP7-PEOPLE-2011 Marie-Curie Action, Project ACRES (IIF-299767/911767) and ACOFC (PCIG09-GA- 2011-293876) from the EU; by Project Puma-Mind (FCHJU-2011-1-303419); partially founded by Project MICINN DPI2011-25649 and supported by the Universitat Polit`ecnica de Catalunya, and the CSIC, from Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental results applying second order sliding mode control to a PEM fuel cell based system

  • Kunusch, Cristian
  • Puleston, Paul
  • Mayosky, Miguel Angel
  • Fridman, Leonid
A robust control solution is proposed to solve the air supply control problem in autonomous polymer electrolyte membrane fuel cells (PEMFC) based systems. A Super Twisting controller is designed using a nonlinear model of a laboratory fuel cell test station, even a Lyapunov based stability discussion is included. Subsequently, the proposed control strategy is successfully implemented in the laboratory test bench. Highly satisfactory results are obtained, regarding dynamic behaviour, oxygen stoichiometry regulation and robustness against uncertainty., Award-winning
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Direct synchronous-asynchronous conversion system for hybrid electrical vehicle applications. An energy-based modeling approach

  • Muñoz Aguilar, Raúl Santiago|||0000-0002-9048-4365
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Puleston, Paul
This paper presents a proposal for a series hybrid electric vehicle propulsion system. This new configuration is based on a wound-rotor synchronous generator (WRSM) and a doubly-fed induction machine (DFIM). The energy-based model of the whole system is obtained taking advantage of the capabilities of the port-based modeling techniques. From the dq port-controlled Hamiltonian description of the WRSM and DFIM, the Hamiltonian model of the proposed Direct Synchronous-Asynchronous Conversion System (DiSAC) is developed. Subsequently, the bond graph models of the DiSAC and associate systems are also provided. Numerical simulations are also presented in order to validate the proposed system
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development and implementation of a supervisor strategy and sliding mode control setup for fuel-cell-based hybrid generation systems

  • More, Jerónimo Jose
  • Puleston, Paul Federico
  • Kunusch, Cristian
  • Allué Fantova, Miguel
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the development and experimental results of a supervisor strategy and a sliding mode control setup to improve the performance of hybrid generation systems. The topology in this study is conformed by a core comprising a fuel cell module and a supercapacitor module, in combination with an alternative energy source module and an electrolyzer. In particular, a wind power turbine is considered as alternative power source to attain a hybrid generation system fully relying on renewable energy. First, a supervisor strategy is proposed to manage the power flows of the subsystems and coordinate the system as a whole. Subsequently, a sliding mode control setup for combined operation of the dc/dc power converters of the fuel cell/supercapacitor core is presented to track the power references synthesized by the supervisor control. Both control levels, supervisor strategy and sliding mode controllers, are implemented and assessed through extensive experimental tests under different wind conditions and heavy-load changes., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct synchronous-asynchronous conversion system for hybrid electrical vehicle applications. An energy-based modeling approach

  • Muñoz Aguilar, Raúl Santiago
  • Dòria Cerezo, Arnau
  • Puleston, Paul
This paper presents a proposal for a series hybrid electric vehicle propulsion system. This new configuration is based on a wound-rotor synchronous generator (WRSM) and a doubly-fed induction machine (DFIM). The energy-based model of the whole system is obtained taking advantage of the capabilities of the port-based modeling techniques. From the dq port-controlled Hamiltonian description of the WRSM and DFIM, the Hamiltonian model of the proposed Direct Synchronous-Asynchronous Conversion System (DiSAC) is developed. Subsequently, the bond graph models of the DiSAC and associate systems are also provided. Numerical simulations are also presented in order to validate the proposed system, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental results applying second order sliding mode control to a PEM fuel cell based system

  • Kunusch, Cristian
  • Puleston, Paul
  • Mayosky, Miguel Angel
  • Fridman, Leonid
A robust control solution is proposed to solve the air supply control problem in autonomous polymer electrolyte membrane fuel cells (PEMFC) based systems. A Super Twisting controller is designed using a nonlinear model of a laboratory fuel cell test station, even a Lyapunov based stability discussion is included. Subsequently, the proposed control strategy is successfully implemented in the laboratory test bench. Highly satisfactory results are obtained, regarding dynamic behaviour, oxygen stoichiometry regulation and robustness against uncertainty., Award-winning, Postprint (published version)