Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laterally-resolved mechanical and tribological properties of laser-structured polymer nanocomposites

  • Rodríguez-Beltrán, René I.
  • Martínez-Tong, Daniel E.
  • Reyes-Contreras, Adela
  • Paszkiewicz, Sandra
  • Szymczyk, Anna
  • Ezquerra, Tiberio A.
  • Moreno, Pablo
  • Rebollar, Esther
In this work, we report on a detailed quantitative nanomechanical mapping of free-standing films of poly(ethylene terephthalate) (PET) and the composite PET/expanded graphite (EG) with 0.4% in weight of the nanoadditive, and of these materials nanostructured by laser irradiation. By using atomic force microscopy, we obtained simultaneously the topography, surface elastic modulus and adhesion force maps of the materials. Young’s modulus images exhibited higher values for the composite in comparison to those of the neat polymer and for the nanostructured films in contrast to the non-nanostructured ones. Additionally, we explored the tribological properties of these systems at the nanoscale. Using lateral force microscopy, we observed a decrease in the friction coefficient for the nanocomposite as compared to the neat polymer, while quantifying an increase for both laser-structured samples. Our results are discussed taking into consideration the possible changes that the samples might undergo during processing, as well as the changes imposed by the complex geometry of the nanometric features in these laterally-resolved mechanical measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional nanostructured surfaces induced by laser on fullerene thin films

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
We report a method to produce nanosecond pulsed laser induced periodic surface structures (LIPSS) on spin-coated [6,6]‑phenyl C71-butyric acid methyl ester (PCBM) films exhibiting a photoinduced resist-free imprinting (PRI) property. LIPSS in PCBM are resist free and can be solvent developed, under certain conditions, leaving the laser illuminated zone as an undissolved residue. LIPSS prepared with a wavelength of 532 nm selectively preserve the electrical conductivity on the LIPSS valleys. The heterogeneous conducting pattern consisting in conducting valleys and less conducting hills observed in the LIPSS has been interpreted as due to a reduction in the crystallinity of the hills provoked by the fast heating/cooling process induced by every laser pulse. On the basis of the experiments we propose that irradiated PCBM films: i) suffer a fast heating/cooling process tending to reduce the overall crystallinity of the LIPSS and therefore decreasing the electrical conductivity of the hills while leaving a remnant conducting film underneath the hills, ii) during laser irradiation the sample suffers a heat treatment leading to the development of a buried phase with enhanced crystallinity, close to the silicon substrate, formed by larger crystals with enhanced electrical conductivity and iii) further solvent treatment reveals the buried phase which remains in the form of partially electrically conducting nanowires. These results point towards the potential use of the described technology for nanofabrication of organic electronic devices., Peer Reviewed