Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First terrestrial occurrence of the complex phosphate chladniite: crystal-structure refinement by synchrotron through-the-substrate microdiffraction

  • Vallcorba, Oriol
  • Casas, Lluís
  • Colombo, Fernando
  • Frontera, Carlos
  • Rius, Jordi
Chladniite, a complex phosphate species belonging to the fillowite group so far only found in meteorites, was identified in a pegmatite from Córdoba (Argentina) as inclusions in beusite. Applying synchrotron through-the-substrate microdiffraction technique (tts-μXRD) to polished thin sections prepared on very thin glass substrates (0.1 mm), diffraction data with nearly single-crystal quality were directly measured at selected chladniite microvolumes of the section. Chladniite is trigonal (space group R-3), with a = 15.0133(3) Å, c = 42.887(2) Å, V = 8371.6(5) Å3. The subsequent crystal structure refinement confirms that the accuracy attainable by using 0.1 mm thick glass-substrates is comparable to that of routine single-crystal measurements [R1=3.34% for 1617 unique reflections]. The refined crystal structure of pegmatitic chladniite differs from meteoritic one in the cation ordering (Mg, Fe+Mn and Ca) at the various metal sites, with Mn being dominant at the M(1) position., Thanks are due to Mr. Luis Gordón and Mr. Marc Puigcerver (Lab. de Preparació de Làmines Primes, Dpt. de Geologia, U. Autònoma de Barcelona) for their decisive contribution in the development of the technique, and to Dr. Jorge Sfragulla (U. Nac. de Córdoba) for help with the field work. The financial support of the Spanish ‘Ministerio de Economía y Competitividad’ (Projects ‘NANOXRED’: MAT2012-35247; MAT2015-67593-P and Severo Ochoa: SEV-2015-0496) is gratefully acknowledged. FC gratefully acknowledges CONICET for a stay at ICMAB. Thank are also due to the ALBA synchrotron (Barcelona, Spain) for beamtime (experiment Nr. 201521156) and to the ‘Centres Científics i Tecnològics de la Universitat de Barcelona’ for some EMP analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric stack sample cooling modification of a commercial atomicforce microscopy

  • Moral, Alberto del
  • Gonzalez Rosillo, Juan Carlos
  • Gómez Rodríguez, Andrés
  • Puig Molina, Teresa
  • Obradors, Xavier
Enabling temperature dependent experiments in Atomic Force Microscopy is of great interest to study materials and surface properties at the nanoscale. By studying Curie temperature of multiferroic materials, temperature dependent phase transitions on crystalline structures or resistive switching phenomena are only a few examples of applications. We present an equipment capable of cooling samples using a thermoelectric cooling stage down to −61.4°C in a 15 × 15 mm2 sample plate. The equipment uses a four-unit thermoelectric stack to achieve maximum temperature range, with low electrical and mechanical noise. The equipment is installed into a Keysight 5500LS Atomic Force Microscopy maintaining its compatibility with all Electrical and Mechanical modes of operation. We study the contribution of the liquid cooling pump vibration into the cantilever static deflection noise and the temperature dependence of the cantilever deflection. A La0.7Sr0.3MnO3-y thin film sample is used to demonstrate the performance of the equipment and its usability by analyzing the resistive switching phenomena associated with this oxide perovskite., This research was supported by Consolider NANOSELECT (CSD 2007-00041). ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). The authors thank ICMAB Scientific and Technical Services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carborane-BODIPY Dyads: New Photoluminescent Materials through an Efficient Heck Coupling

  • Bellomo, Chiara
  • Chaari, Mahdi
  • Cabrera González, Justo
  • Blangetti, Marco
  • Lombardi, Chiara
  • Deagostino, Annamaria
  • Viñas, Clara
  • Gaztelumendi, Nerea
  • Nogués, Carme
  • Núñez Aguilera, Rosario
  • Prandi, Cristina
A small library of carborane-BODIPY/aza-BODIPY dyads were efficiently synthesized by means of a novel convergent synthetic approach, the key step of which is a Pd-catalyzed Heck coupling reaction. The structural characterization and photoluminescence properties of the newly synthesized dyads were evaluated. The presence of the carborane did not significantly alter the photophysical patterns of the BODIPY or aza-BODIPY in the final fluorophores, but it produced a decrease of the emission fluorescent quantum yields that was in the range from 1.4 % for aza-BODIPY to 48 % for BODIPY-dyads. The carborane-BODIPY dyads were successfully incorporated into cells, especially compounds 2, 4 and 13, demonstrating their cytoplasmic localization. The fluorescent and biocompatibility properties make these compounds good candidates for in vitro cell tracking., We acknowledge the italian MIUR and the Cassa di Risparmio di Torino for support as well as Prof. Claudio Medana (UNITO) for HRMS measurements. The work was also supported by the Spanish Ministerio de Economía y Competitividad, MINECO, [CTQ2016-75150-R, MAT2017-86357-C3-3-R and “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496)] and Generalitat de Catalunya (2017-SGR-1720, 2017-SGR-503). The authors also wish to thank the Servei de Microscopia at the UAB. M.C. is enrolled in the Université Sfax Ph.D. program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrahigh energy density supercapacitors through a double hybrid strategy

  • Dubal, Deepak P.
  • Nagar, Bhawna
  • Suárez Guevara, Jullieth
  • Tonti, Dino
  • Enciso, Eduardo
  • Palomino, Pablo
  • Gómez Romero, Pedro
Herein, we are presenting all-solid-state symmetric supercapacitors (ASSSCs) with an innovative double hybrid strategy, where a hybrid material based on reduced graphene oxide (rGO) anchored with phoshotungstic acid, rGO-H<inf>3</inf>PW<inf>12</inf>O<inf>40</inf>) is combined with hybrid electrolyte (hydroquinone-doped gel electrolyte). Initially, a hybrid electrode is fabricated by decorating H<inf>3</inf>PW<inf>12</inf>O<inf>40</inf> nanodots onto the surface rGO (rGO-PW<inf>12</inf>). Next, a symmetric cell based on rGO-PW<inf>12</inf> electrodes was assembled with PVA-H<inf>2</inf>SO<inf>4</inf> polymer gel-electrolyte. Interestingly, rGO-PW<inf>12</inf> symmetric cell revealed a substantial enhancement in the cell performance as compared to parent rGO systems. It featured a widened potential range of 1.6 V, thereby providing 1.05 mWh/cm<sup>3</sup> energy density. The electrochemical performance of rGO-PW<inf>12</inf> cell was further advanced by introducing redox-active (hydroquinone) species in to the PVA-H<inf>2</inf>SO<inf>4</inf> gel-electrolyte. Indeed, the performance of rGO-PW<inf>12</inf> cell was surprisingly improved with an ultra-high energy density of 2.38 mWh/cm<sup>3</sup> (more than two-fold)., Partial funding from Miisterio de Economía y Competitividad through Fondo Europeo de Desarrollo Regional (FEDER) (Grant MAT2015-68394-R, MINECO/FEDER) and from AGAUR (project NESTOR) are acknowledged. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295. Finally, the award to DPD of a Marie-Curie Fellowship through Beatriu de Pinos Program (BP-DGR-2013) from the Catalan system of science and technology, Spain, is gratefully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed