Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Diamond-coated silicon nanowires for enhanced micro-supercapacitor with ionic liquids

  • Gund, Girish S.|||0000-0002-2301-6051
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Mueller-Sebert, Wolfgang
  • Bidan, Gérard
  • Gaboriau, D.
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Silicon nanowires (SiNWs) and diamond-coated SiNWs (D@SiNWs) on highly n-doped silicon wafer substrates were prepared through standard chemical vapor deposition (CVD) method as electrodes for micro-supercapacitors. The surface of electrodes exhibited uniform distribution of SiNWs on silicon wafer and continuous diamond coating on SiNWs. Electrochemical measurements were carried out in order to test the combined effect of using Ionic Liquid electrolytes and diamond coating on SiNWs on energy storage performance. Optimal values of areal capacitance, energy density and power densities were 317 μF cm, 0.13 μWh cm and 150 μW cm, respectively. So, the work reported here confirms the suitability and compatibility of D@SiNWs electrode materials and ionic liquid electrolytes for the fabrication of high-performing and robust micro-supercapacitors.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Metal oxides in photovoltaics: All-oxide, ferroic and perovskite solar cells

  • Pérez-Tomás, Amador
  • Mingorance, Alba
  • Tanenbaum, David M.
  • Lira-Cantú, Mónica
Semiconductor oxides have been applied in photovoltaic technologies for many years. The remarkable versatility of their properties and the feasibility to be fabricated by simple, low-cost and easily scalable fabrication methods confers oxides a unique place in next generation photovoltaics (NGPVs). Their outstanding ability to preserve or improve device characteristics, even as a noncrystalline (amorphous) material, allows their application in flexible and semitransparent PVs devices and printed electronics. Basic (doped and undoped) semiconductor oxides have demonstrated to provide enhanced lifetime stability to state-of-the-art PVs such as Organic (OPV) and halide perovskite solar cells (PSCs), which is a significant step toward NGPVs industrialization and commercialization. But semiconductor oxides, in their more complex form, can also provide properties like magnetism, ferroelectricity, or pyroelectricity (among others), that collectively with the most classical materials, can deliver novel and innovative features. This chapter documents the most recent results observed when semiconductor oxides are applied in different NGPVs technologies. The chapter covers technologies like all-oxide solar cells where the oxide is not only part of the device but also acts as the main light harvesting material. The chapter also describes the application of oxides as part of OPV and PSCs where semiconductor oxides are mostly applied as barrier layers eliminating the use of expensive and unstable organic semiconductors, enhancing device lifetime., A.P.T. acknowledges Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under contract ENE2015-74275-JIN. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the predoctoral contract to A.M; for the grant ENE2013-48816-C5-4-R, ENE2016-79282-C5-2-R and the Nanoselect Excelence Network MAT2015-68994-REDC. To the Agència de Gestiód'Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l'Energia (Xarmae). To the COST Action StableNextSol project MP1307., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

On the Enhancement of the Thermal Conductivity of Graphene-Based Nanofluids

  • Rodríguez Laguna, María del Rocío|||0000-0001-5582-1728
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Heat transfer fluids have been extensively used in both low-temperature and high temperature applications (e.g. microelectronics cooling and concentrated solar power). However, their low thermal conductivity is still a limit on performance. One way to enhance thermal properties is to disperse nanomaterials, such as graphene flakes in the base fluid. In this work, we have developed highly stable DMAc-graphene nanofluids with enhanced thermal properties. Furthermore, the displacement of several Raman bands as a function of graphene concentration in DMAc suggests that the solvent molecules are able to interact with graphene surfaces strongly.