Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Vortex dynamics in nanofabricated chemical solution deposition high-temperature superconducting films

  • Palau, Anna
  • Rouco, Víctor
  • Luccas, Roberto F.
  • Obradors, Xavier
  • Puig Molina, Teresa
Artificial manipulation and control of vortex dynamics in YBa2Cu3O7 (YBCO) films have always been a complex issue, especially since high thermal excitations but also strong vortex pinning capabilities coexist in this material. Thus, artificial nanofabrication strategies able to generate competing effects with intrinsic microstructural defects need to be achieved. Lithography tools are widely used to create model systems with controlled pinning potentials in superconductors. However, these techniques easily disturb the optimal oxygen film doping in YBCO films and consequently the overall performances degrades. We have optimized the use of two different high-resolution nanolithography approaches, Focused Ion Beam Milling and Electron Beam Lithography, to artificially and locally modify the pinning landscape of YBCO films grown by chemical solution deposition (CSD). Three different nanofabricated systems will be discussed, which resulted in ideal structures to manipulate vortex dynamics in CSD-YBCO thin films with strong intrinsic pinning centers. In particular, we observed artificial granularity effects, nanowall pinning, and positive and negative rectification effects. We will report on our understanding of all these effects and potential expectations., This work has been supported by MINECO (MAT2014-51778-C2- 1R, MAT2011-28874-C02-01, Programa CONSOLIDER, CSD 2007-00041), Generalitat de Catalunya (2014-SGR-00753), European Union, FP7- EU-NMP-LA-2012-280432 EUROTAPES project and Cost Action MP1201. ICMAB acknowledges the Severo Ochoa Center of Excellence mention from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Conjugated Polymers: Relationship Between Morphology and Optical Properties

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
In this Chapter we will start by briefly summarising the basic concepts of the electronic structure of conjugated polymers. This will enable the discussion of the relevant descriptions of the dielectric function. We will relate these descriptions to the model parameterisations which are used in advanced ellipsometric analysis of thin films such as those used in devices for organic photovoltaics (OPVs) and light emitting diodes (OLEDs). Amongst other things, such parametric descriptions are useful to deal with structural changes in conjugated polymer thin films. Once the models are presented, we will provide representative examples of the nexus between morphology and optical constants, and how the latter can be employed to infer aspects of the former. First, we will discuss how chain conformation affects the optical properties. Then, we will explain the anisotropic behaviour of conjugated polymer films due to their intrinsic molecular anisotropy and review different cases (f. i., oriented films or semicrystalline polymers). We will also describe structural changes that occur upon blending polymers with fullerenes and concomitant variations of the optical properties. Here we will focus on state of the art low band gap polymers mixed with fullerenes. Finally, real-time ellipsometric experiments in which these structure-property relationships can be exploited will be presented., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through grant MAT2015-70850-P and the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Optical properties of semiconductors

  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
In this chapter we present basic concepts which are relevant to link the results obtained from ellipsometry data analysis with fundamental properties of semiconductors for photovoltaic applications. The linear optical properties of semiconductors are best discussed in terms of the relationship between the dielectric function ε and the band structure., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for funding through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic Solar Cells

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
Organic solar cells attract both scientific and economic interest due to their potential for clean and cost-effective photovoltaic energy conversion. Continuous evolution of this field relies on materials research, including synthesis of new compounds and fine control over film microstructure, as well as improved device architectures. In this context, spectroscopic ellipsometry is a helpful characterization tool, stretching over material preparation, device structure, and device modelling. This chapter will provide a general perspective of aspects that can be investigated by ellipsometry in these systems. The acquired insights enhance our capability to understand and model the optoelectronic properties of photovoltaic devices., The authors thank Ms. Andrea Pitillas help in the preparation of devices studied in Fig. 15.8 and the Spanish Ministry of Economy and Competitiveness for funding through grants MAT2012-37776, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic-Inorganic Hybrid Perovskite Solar Cells

  • Fujiwara, Hiroyuki
  • Podraza, Nikolas J.
  • Alonso Carmona, M. Isabel
  • Kato, Masato
  • Ghimire, Kiran
  • Miyadera, Tetsuhiko
  • Chikamatsu, Masayuki
Quite high efficiencies exceeding 20% have been realized in solar cells incorporating organic-inorganic hybrid perovskites (APbX3), which have a unique structure with a center cation [A = CH3NH3+, HC(NH2) 2 + ] located within a PbX3− cage (X = I, Br, Cl). Superior characteristics of hybrid perovskite solar cells can be understood from the nature of optical transitions and the efficient carrier collection in the device. From these points of view, this chapter provides details on optical properties of various hybrid perovskite materials and carrier dynamics in the solar cells. In particular, based on the first-principles analyses of different perovskite materials, we present universal rules that allow the unified interpretation of the optical absorption phenomenon in APbX3 perovskites. The external quantum efficiency (EQE) analysis further reveals that high short-circuit current densities (>20 mA/cm2) observed in the perovskite solar cells originate from electric-field-assisted carrier collection and the suppressed optical losses in the devices. Although hybrid perovskites have quite favorable characteristics for solar cells, these materials exhibit rather intense phase change upon exposure to humid air. In this chapter, the degradation process of CH3NH3PbI3 in humid air, characterized by applying ellipsometry technique, is further presented and discussed., N. J. Podraza and K. Ghimire would like to acknowledge D. Zhao, A. Cimaroli, Y. Ke, F. Hong, T. Shi, and Prof. Y. Yan for providing samples and materials; M. Junda for graphical assistance; and the National Science Foundation for financial support (CHE-1230246). M. I. Alonso acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanostructured Electroactive Materials with Large Charge Capacity: Direct Field Electrostimulation Through Connected and Non-connected Electrodes

  • Rajnicek, Ann M.
  • Suñol, Cristina
  • Casañ Pastor, Nieves
Electric field stimulation protocols depend on the electrode material used, but the material characteristics are often not considered or sufficiently described for optimization. Furthermore, charge capacity is considered only in capacitor-like systems, without taking into account that intercalation materials offer an internal faradaic charge delivery advantage, with substantially less risk for biological systems. This chapter describes new materials with high charge capacities, appropriate electric field protocols for using them, and examples of neural cultures that can be used to elucidate the biological effects of fields. Mammalian neurons, neuron–astrocyte co-cultures, and amphibian spinal neurons are used in vitro, often as scratch wound models, to assess their potential for stimulating tissue repair. Importantly, remote control of dipoles induced in conducting implanted materials is shown to be a new promising approach and a breakthrough., The present work has been financed by the Ministry of Science of Spain (MAT2015-65192-R and RTI2018-097753-B-I00), Fundació Marató TV3 (110130/31), Severo Ochoa Program (SEV-2015-0496 and CEX2019-000917-S) and EU grant FP6-2004-NEST-C1 028473.