Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Design and use of an evaluation tool for assessment of instrumental skills within a subject related to materials science

  • Andrés-Ruiz, Víctor Tomás
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] The interest in a competence-based approach in the university, continues increasing at a considerable rate in the European Higher Education Area. Generic competences (specific of the sort of education) assessment is nowadays considered crucial to support socio-educational demands. Nevertheless, the methodologies for the assessment/evaluation of the generic competences and their inclusion in the curriculum has yet to be adequately achieved. Competency-based learning requires either the development of new evaluation tools or adjustment of the existing ones in order to support marking changes needed for new learning-oriented active methodologies. In this sense, questionnaires are an innovative educational tool for competence evaluation although the development of a solid body of knowledge is still a pending task. For this reason, this study proposes a methodological tool based on a questionnaire for rating the assessment (or not) of Specific Instrumental generic competence (instrumental skills), as defined in our university, by undergraduate students. In this regard, a practical intervention was designed to integrate the evaluation of activities related to Instrumental Skills in undergraduate students of Chemical Engineering, taking advantage of a computer practice session programmed as a part of the Materials Science subject. The appropriateness of the developed questionnaire, based on some learning outcomes, as a tool to properly score the competence of interest has been analysed by comparison of the obtained marks with the ones coming from more regular evaluation tools. The results may lead to some interesting conclusions to university professors when creating appropriate competency-based scoring questionnaires., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use of ict tools in hybrid environments of presential and virtual learning. Experience in two mechanical engineering subjects of master&apos, s degree

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Rupérez Moreno, María José|||0000-0001-8457-7963
[EN] In March 2020, the World Health Organization (WHO) raised to an international pandemic level the outbreak of the coronavirus (COVID-19) disease caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV2). Consequently, the Spanish government declared the State of Alarm on March 14th, 2020. From that moment on, all non-essential activities were tightened lockdown. This measure affected all levels of education, and face-to-face learning was suspended until the end of the academic year. While the last year all the educational community was forced to suddenly move to online platforms, this year has been rather marked by the need of flexibility in the learning model. The main reasons are the constant threat of global lockdowns, the changing local mobility restriction measures and the forced isolation or quarantine in case of infections or close contact with someone with a positive Polymerase Chain Reaction (PCR) test. This situation has drastically affected the face-to-face teaching model. At the same time, this uncertain scenario has undoubtedly been an opportunity to implement Information and Communications Technology (ICT)activities in our teaching. This paper presents some actions implemented in two subjects of mechanical design of two different master¿s degrees with 36 and 19 students, respectively. The developed resources concern to the learning materials provided to the students, both for theoretical and practical lessons. The audio-visual materials generated over the classes, both videos and annotations on the virtual whiteboard, has also been managed. Finally, the delivery and defence of the students' works have been adapted. As it was foreseeable all, some of the students or the teacher, have followed the classes online over the term. In all cases, the developed materials and the methodology followed have been valid for use in face-to-face teaching, online and blended learning, thus providing the flexibility required. The level of success has been measured, mainly through a survey answered by the students. In addition, it has been analysed objective data, such as the marks and the number of visits or downloads of the documents uploaded to the UPV e-learning platform. Finally, it is concluded which actions taken would be valid for the post-COVID era., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165 and project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluation activities performance of the specific instrumental transversal competence in subjects of the mechanical engineering area

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Martinez-Sanchis, Sandra|||0000-0002-3223-0623
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
[EN] Nowadays, the European higher education space is concerned, not only about the transmission of theoretical knowledge, but also about the acquisition of soft-skills, which are increasingly demanded in the professional profiles of graduates. Therefore, the Universitat Politècnica de València (UPV) has elaborated its own program aiming to develop these generic capabilities, which are embedded in 13 Transversal Competences (CT in Spanish). All of them are worked on and evaluated in all UPV degrees, whether undergraduate or graduate. Specifically, the "Specific Instrumental" transversal competence has been working for two years by a team of lecturers from the Department of Mechanical and Materials Engineering (DIMM in Spanish). Their objective is to develop an effective methodology to work on the acquisition and evaluation of this competence. The tool chosen to work with is ANSYS®, which is widely used in the field of mechanical engineering. This commercial software provides numerical solutions to complex problems using the Finite Element Method (FEM). The proposed methodology has been implemented during this year in three different subjects with a total of 335 students and is based on previous experience carried out in small groups last year. The objective is also to consolidate a procedure suitable for large groups without increasing lecturer's dedication time. After analysing the characteristics that were not entirely satisfactory, the new proposal seeks to improve them while maintaining the correct actions of the previous experience. Thus, laboratory training sessions and a different timed exercise for each student are kept. The most important changes affect the distribution of the worktime of the student and the assessable exercises. The number of evaluable exercises has been reduced to one, as well as the content and the test score. The proposed exercise consists of modelling a mechanical component and carrying out several tasks related to the mechanical study of a component. The correct completion of the different sections allows a numerical evaluation of the laboratory sessions and the suitability of the methodology. At the same time, the justification of the steps followed, and the adequacy of the strategies followed give the level reached in the ¿Specific Instrumental¿ transversal competence. The results reveal that students have achieved a greater degree of autonomy in managing the software. Furthermore, the new evaluation system discriminates the mastery with greater rigor, in the past there were no intermediate marks, the capability was achieved or not. Additionally, all the practical sessions have been adapted to the sanitary situation following an online format. This adaptation to the COVID scenario has provided the opportunity to introduce changes in the lecturing material that will be maintained in the next courses., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación, the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Formation of biomimetic calcite-gelatin/agarose composites: Gel occlusion, aggregate co-orientation and Mg content)

  • Yin, Xiaofei
  • Fernández Díaz, Lurdes
  • Griesshaber, Erika
  • Ziegler, Andreas
  • Walther, Paul
  • García-García, Francisco Javier
  • Schmahl, Wolfgang W.
Trabajo presentado en la XXXVI Reunión de la Sociedad Española de Mineralogía, celebrada en Oviedo (España) del 4 al 7 de julio de 2017, Biological hard tissues such as shells, bones and teeth are mineral-organic composite materials with enhanced mechanical properties. In the case of carbonate biological hard tissues, the organic component consists of a mixture of proteins, glycoproteins and polysaccharides, arranged to define a matrix of membranes and of fibrils. The most common mineral component is nanoparticulated calcium carbonate, calcite or aragonite. The characteristics of calcite crystal aggregation and its organization into hierarchical orientation patterns is mediated by the organic matrix, which becomes occluded within the mineral component during the formation of the hard tissue., This research is part of the GermanSpanish Joint Acciones Integradas Program (AIB2010 DE-0008), DAAD50749739. This research was partially funded by projects CGL2013-47988-C2- 01-P and CGL2016-77138-C2-1-P (MECC-Spain), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The Co-operative Influence of Gel Solid Content and Reagent Solution Concentrations on Gel Occlusion and Crystal Micro-organization in Biomimetic Calcite-Agar Composites

  • Greiner, Martina
  • Yin, Xiaofei
  • Fernández Díaz, Lurdes
  • Griesshaber, Erika
  • Ziegler, Andreas
  • Schmahl, Wolfgang W.
Trabajo presentado en la XXXVI Reunión de la Sociedad Española de Mineralogía, celebrada en Oviedo (España) del 4 al 7 de julio de 2017, Carbonate biominerals are composite materials which consist of a compliant organic polymeric matrix and a stiff mineral component (calcite or aragonite (CaCO3)). The polymeric matrix is arranged in nanometer thick membranes and fibrils. The membranes compartmentalize the space and envelope the mineral component, which appears as aggregations of nanoparticles. The fibrils infiltrate the space between these nanoparticles, affecting their degree of co-alignment. The organic polymeric matrix becomes occluded within the mineral component during the biomineralization process through mechanisms that are not fully understood yet., Martina Greiner is financially supported by the German Research Foundation (DFG), research unit "Transalpine Mobility and Culture Transfer" (FOR 1670) of the German-Spanish Joint Acciones Integradas Program (AIB2010 DE-0008), DAAD-50749739. This research was partially funded by projects CGL2013-47988-C2-01-P, CGL2016-77138-C2-1-P (MECC-Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Using decision trees to extract patterns for dairy culling management

  • Lopez-Suarez, M.
  • Armengol, Eva
  • Calsamiglia, S.
  • Castillejos, L.
Trabajo presentado en el 14ª Artificial Intelligence Applications and Innovations (AIAI 2018), celebrado en Rhodes (Grecia), del 25 al 27 de mayo de 2018, The management of a dairy farm involves taking difficult technical and economic decisions such as the replacement of some cows to either maintain or increase the productivity of the farm. However, there is not a standard method supporting the selection procedure of which animals need to be culled. In the present study we used decision trees to develop a model able to classify a cow according to the average herd productivity. This model, obtained from a data base around 98000 cows, predicts the average milk production of the first lactation of a cow based on the monthly milk controls corresponding to the lactation peak. Our goal is to identify poor productive cows during her first lactation in order to make more accurate selections of which cows should be culled., This research is partially funded by the projects (Project AGL2015-67409-C2-01-R) from the Spanish Ministry of Economy and Competitiveness; RPREF (CSIC Intramural 201650E044); and the grant 2014-SGR-118 from the Generalitat de Catalunya., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of atmospheric aerosol properties using lidar measurements and their impact on radiative budget in Barcelona over the past 20 years

  • Lolli, Simone
  • Sicard, Michaël
  • Comerón Tejero, Adolfo
  • Gil Díaz, Cristina
  • Oliveira, Daniel Camilo Fortunato dos Santos
  • Landi, Tony C.
  • Rodríguez Gómez, Alejandro Antonio
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Dios Otín, Víctor Federico
Aerosols are significant atmospheric constituents that modulate radiation and cloud processes. We evaluated 17-year aerosol profile trends in Barcelona, Spain, from lidar measurements. In summer aerosol reaches 5 km, while in the other seasons it exhibits clear exponential decay. Sahara dust transport affects all seasons, with winter layers above and others penetrating the boundary layer. This study informs the formation of haze and urban preservation strategies in the Mediterranean. The analysis puts in evidence that the averaged net radiative effect is of cooling at both surface level and top of the atmosphere., This work has been made possible through the efforts of many people, whom it would be too long to mention, and the funding of many grants through the years, in particular European projects of different framework programmes (FP5 EARLINET project (ID EVR1-CT-1999-40003), FP6 EARLINET-ASOS (ID: 25991), FP7 ACTRIS (ID: 262254), H2020 ACTRIS-2 (ID: 654109), ACTRIS-PPP (ID: 739530), ACTRIS IMP (ID: 871115) and ATMO-ACCESS (ID: 101008004)), projects of the Spanish National Research Programmes (refs. TIC 431/93, AMB96-1144-C02-01, REN2000-1907-CE, REN2000-1754-C02-02 / CLI, REN2003-09753-C02-C02 / CLI, REN2003-09753-C02-C CGL2008- 01330-E/CLI 02 / CLI, REN2002-12784-E, CGL2005-5131-E, CGL2006-27108-E/CLI, CGL2006-26149-E/CLI, CGL2007-28871-/CLI, CTM2006-27154-E/TECNO, TEC2006-07850/TCM, TEC2009-09106, TEC2012-34575, TEC2015-63832-P and PID2019-103886RB-I00), the project of the Catalan Regional Government IMMPACTE, and the ESA project No. nº 21487/08/NL/HE. The support of the European Union through NextGenerationEU funds is also gratefully acknowledged., Peer Reviewed, Postprint (author's final draft)