Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Phononic and photonic nanostructures

  • Sotomayor Torres, C. M.
Trabajo presentado a la Conferencia "BNC-b Research Meeting" celebrada en Barcelona el 14 de julio de 2011.-- et al., The Phononic and Photonic nanostructures (P2N) group investigates the interaction of photons, phonons and electrons in nanoscale condensed matter underpinn ed by research in nanofabrication and nanometrology. Its long term aim is to develop new information technology concepts where information processing is achieved with multiple state variables. The P2N group research on nanoscale thermal transport impacts thermal management in nanoelectronics. Similarly, the optical studies of acoustic effects in confined and phononic systems explores the limits of couple state-variables. The technology-oriented work on exciton-plasmon coupling printed polymer-based photonic structures targets enhanced light extraction from light sources, while the quest for novel nanometrology paves the way for future standards in nanotechnology. Finally. self- assembly research is oriented to pushing the limits of lithography while simultan eously enabling new functions for Beyond CMOS., The research carried out at the P2N is funded by the following projects: NANOPACK (FP7 grant agreement no. 216176); NanoICT (FP7 grant agreement no. 216165); NAPANIL (FP7 grant agreement no. 214249); TAILPHOX (FP7 grant agreement no. 233883); SEAL (FP7 grant agreement no. 257379); LAMAND (FP7 grant agreement no. 245565); NANOPOWER (FP7 grant agreement no. 256959); NANOFUNCTION (FP7 grant agreement no. 257375); NANO-TEC (FP7 grant agreement no. 257964); Collaboration project between CSIC and the University of Chile (MICINN contract no. 2008CL0046); Support to Emerging Groups by the Agencia de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya (AGAUR contract no. 2009 SGR 150); ACPHIN (MICINN contract no. FIS2009-10150); nanoTHERM (CONSOLIDER-Ingenio 2010, MICINN contract number CSD2010-00044); Juan de la Cierva programme - Towards a phonon source based on opto-mechanical crystals (MICINN contract number JCI-2010-06591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Defect analysis and alignment quantification of line arrays prepared by directed self-assembly of a block copolymer

  • Simao, Claudia
  • Tuchapsky, D.
  • Amann, A.
  • Morris, Michael A.
  • Sotomayor Torres, C. M.
Trabajo presentado al XXVIII Metrology, Inspection, and Process Control for Microlithography, celebrado en California (US) en 2014., Different linear patterns obtained from the directed self-assembly of the block copolymer (BCP) polystyrene-b-polyethylene oxide (PS-b-PEO) were analysed and compared. The hexagonal phase PS-b-PEO in a thin film exhibits linear pattern morphology, by conventional solvent annealing in an atmosphere saturated in chloroform. The surface energy of the silicon substrates was varied using surface functionalization of a self-assembly monolayer (SAM) and a polymer brush, chosen to investigate the influence of the surface energy on the self-assembly of the BCP. The linear patterns formed were analyzed with innovative image analysis software specifically developed in our laboratory to identify elements and defects of line arrays from block copolymer self-assembly. The technique starts by performing dimensional metrology to calculate the pitch size and estimate the linewidth of the lines. Secondly, the methodology allows identification and quantification of typical defects observable in BCP systems, such as turning points, disclination or branching points, break or lone points and end points. The defect density and the quantification of the alignment were estimated using our technique. The methodology presented here represents a step forward in dimensional metrology and defect analysis of BCP DSA systems and can be readily used to analyze other lithographic or non-lithographic patterns., The research leading to these results received funding from the European Union FP7 under the project LAMAND (grant agreement n° 245565), the Spanish MICIN under the project TAPHOR (contract nr. MAT2012-31392) and the Science Foundation Ireland under grant number 09/SIRG/I1615., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Order and defectivity nanometrology by image processing and analysis of sub-20 nm BCPs features for lithographic applications

  • Simao, Claudia
  • Tuchapsky, D.
  • Khunsin, W.
  • Amann, A.
  • Morris, Michael A.
  • Sotomayor Torres, C. M.
Trabajo presentado al III Dimensional Optical Metrology and Inspection for Practical Applications, celebrado en Baltimore (US) del 5 al 6 de mayo de 2014., The line patterns obtained by the self-assembly of the block copolymer (BCP) polystyrene-b-polyethylene oxide (PS-b-PEO) was investigated. The hexagonal PS-b-PEO 42k-11.5k in a thin film was solvent annealed in a chlorophorm saturated atmosphere for three different annealing times. The microphase segregation of this BCP returned 18nm cylinders of PEO through the PS matrix, with an approximately 40 n periodicity, as expected. Under chlorophorm vapours, the PEO cylinders oriented perpendicular to the silicon substrate while increasing the annealing time. These cylinders formed linear patterns with different alignment. To achieve insights about the percentage of alignment, defect type pareto and density, and order quantification to compare the three annealing recipes, the samples were analysed with innovative image analysis software specifically developed in our laboratory to identify elements and defects of line arrays from block copolymer self-assembly. From this technique, it was extracted dimensional metrology estimating pitch size and placement error, and the line-width of the lines was estimated. Secondly, the methodology allows identification and quantification of typical defects observable in BCP systems, such as turning points, disclination or branching points, break or lone points and end points. The defect density and the quantification of the alignment were estimated using our technique. The methodology presented here represents a step forward in dimensional metrology and defect analysis of BCP DSA systems and can be readily used to analyze other lithographic or non-lithographic patterns., The research leading to these results received funding from the European Union FP7 under the project LAMAND (grant agreement n° 245565), MERGING (grant agreement no. 309150) and QUANTIHEAT (grant agreement no. 604668), and the Spanish MINECO under the project TAPHOR (contract nr. MAT2012-31392) and the Science Foundation Ireland under grant number 09/SIRG/I1615., Peer Reviewed