Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a Twisting based algorithm

  • Dòria-Cerezo, Arnau
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Trabajo presentado a la 39th IECON celebrada en Viena del 10 al 13 de noviembre de 2013., This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., This work was supported by the Spanish Government Research Project DPI2010-15110, Project Marie Curie FP7-2011-IIF-299767/911767 ACRES (EU), CONICET and UNLP (Argentina). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños, Fernando
Trabajo presentado a la ACC celebrada en Washington del 17 al 19 de junio de 2013., We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., This research has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MICINN-España), the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno-Noguer, Francesc
  • Angulo, M. T.
Trabajo presentado al 52nd CDC celebrado en Florencia del 10 al 13 de diciembre de 2013., In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCHJU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain), the CSIC project MACPERCON (code 201250E027) and the CSIC JAE-DOC Research Programme. J. Moreno gratefully acknowledges the financial support from PAPIIT, UNAM, grant IN111012, and Fondo de Colaboración del II-FI, UNAM, IISGBAS-165-2011., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas, J. D.
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
Trabajo presentado al 39th IECON celebrado en Viena del 10 al 13 de noviembre de 2013., In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., The research work of José David Rojas has been supported by the project 322-B2-727 of the Vicerrectoría de Investigación, Universidad de Costa Rica. The research work of C. Ocampo-Martinez has been supported by the project MACPERCON (Ref. 201250E027) of the Spanish National Research Council (CSIC). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of an adaptive extremum seeking algorithm for hydrogen minimization in PEM fuel cell based systems

  • Kunusch, Cristian
  • Castaños, Fernando
Presentado al ECC 2013 celebrado en Zurich del 17 al 19 de julio., This work presents initial experimental results of an adaptive sliding-mode extremum seeker that minimizes the hydrogen consumption in a fuel cell based system. The extremum seeker is based on the classical steepest-descent method, the main challenge being the fact that the gradient of the objective function is unknown. The gradient is estimated by means of a sliding-mode adaptive estimator. The strategy is applied in experimental practical situations in a fuel cell test bench, this allows to asses the performance of the scheme as well as the difficulties that arise in real applications., This research has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09- GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MICINN-España), the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans, Noemí
  • Llorca, Jordi
  • Husar, Attila
Presentado al IV Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Estoril (Portugal) del 26 al 28 de junio de 2013., The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., This work is partially funded by the projects MICINN DPI2011-25649 and MINECO ENE2012-36368, and by the contract PUMA-MIND FP7 303419 with the European Comission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, M.
  • Husar, Attila
  • Serra-Prat, María
  • Riera, Jordi
Presentado a la 5th International Conference on Fundamentals & Developments of Fuel Cells celebrada en Karlsruhe (Alemania) del 16 al 18 de abril de 2013., The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., This work is partially funded by the national project MICINN DPI2011-25649, and by the contract PUMA-MIND FP7 303419 with the European Comission., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
Presentado a la 5th International Conference on Fundamentals & Developments of Fuel Cells celebrada en Karlsruhe (Alemania) del 16 al 18 de abril de 2013., This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Presentado a la XV Reunión de Trabajo en Procesamiento de la Informnación y Control celebrada en Argentina del 16 al 20 de septiembre de 2013., En este trabajo se presenta el diseño de un controlador para maximizar la eficiencia de una pila de combustible, en base a un algoritmo Super-twisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Este trabajo fue realizado con el apoyo de la UNLP, CONICET, y SECyT, de Argentina; y del FP7-PEOPLE-2011 Marie-Curie Action, Proyectos IIF-ACRES (299767/911767) y (GA: PCIG09-GA-2011-293876), de la Unión Europea, los proyectos Puma-Mind (GA: FCH-JU-2011-1-303419) y CICYT DPI2011-25649 (MINECO-España) y el programa JAE-DOC del CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

2D transient modeling of hydrogen purge and temperature effects on the performance of PEM fuel cells

  • Strahl, Stephan
  • Husar, Attila
  • Riera, Jordi
Resumen del trabajo presentado al 11th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (ModVal 11) celebrado del 17 al 19 de marzo de 2014 en Winterthur (Switzerland)., Project PUMA MIND (FP7-FCH-JU-2011-1-303419) and project MESPEM (DPI2011-25649)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A two-dimensional multi-physics approach of transient PEMFC modeling in a virtual fuel cell car

  • Mayur, Manik
  • Strahl, Stephan
  • Husar, Attila
  • Bessler, Wolfgang G.
Resumen del trabajo presentado al 11th Symposium on Fuel Cell and Battery Modeling and Experimental Validation (ModVal 11) celebrado del 17 al 19 de marzo de 2014 en Winterthur (Switzerland)., Project PUMA MIND (FP7-FCH-JU-2011-1-303419) and project MESPEM (DPI2011-25649)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control de temperatura en pilas de combustible tipo PEM de cátodo abierto

  • Strahl, Stephan
  • Husar, Attila
  • Riera, Jordi
  • Costa Castelló, Ramon
Trabajo presentado a las XXXV Jornadas de Automática celebradas en Valencia del 3 al 5 de septiembre de 2014., En este trabajo se analiza el modelo de una pila de combustible tipo PEM de cátodo abierto. Se caracterizan sus puntos de equilibrio. Se analiza el plano de fase del modelo alrededor de diferentes puntos de operación y se plantea una linearización del comportamiento del sistema. Finalmente se plantea un diseño basado en control robusto. Este diseño se valida con el modelo completo., Este trabajo ha sido parcialmente financiado por los proyectos MICINN DPI2011-25649 y PUMAMIND FP7 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento-Carnevali, María Laura
  • Batlle, Carles
  • Serra-Prat, María
  • Massana, Inmaculada
Trabajo presentado al Iberconappice 2014 (Congreso Iberoamericano de Hidrógeno y Pilas de Combustible) celebrado en Barcelona del 15 al 17 de octubre., This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model., This work has been supported by National Project DPI2011-25649 and European Project PUMA MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna, Julio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado al Iberconappice 2014 (Congreso Iberoamericano de Hidrógeno y Pilas de Combustible) celebrado en Barcelona del 15 al 17 de octubre., [EN]: This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work., [ES]: Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección de los estados a estimar está basada en la funcionalidad y desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos a partir de un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de correción basada en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador en la reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., This work has been partially funded by the Spanish National Project DPI2011-25649 and the European project PUMA MIND SPI-JTI-FCH 303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento-Carnevali, María Laura
  • Batlle, Carles
  • Massana, Inmaculada
  • Serra-Prat, María
Trabajo presentado a la European Hydrogen Energy Conference, celebrada en Sevilla (España) del 12 al 14 de marzo de 2014.-- Este ítem (excepto textos e imágenes no creados por el autor) está sujeto a una licencia de Creative Commons: Attribution-NonCommercial-NoDerivs 3.0 Spain., This work has been supported by National Project DPI2011-25649 and European Project PUMA MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter nonlinear state observer with unmatched disturbance estimation for PEMFC systems

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
Trabajo presentado a la 6th International Conference on ”Fundamentals & Development of Fuel Cells”, celebrada en Toulouse (Francia) del 3 al 5 de febrero de 2015., In this paper a nonlinear state observer based on a distributed parameter model is proposed for a proton exchange membrane fuel cell (PEMFC). The estimation technique is implemented using a model-based nonlinear observer with a nonlinear disturbance observer in parallel. To implement the model, a finite element discretisation is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the observer synthesis procedure. By means of this double observation technique it is possible to reconstruct the gases concentrations internal states in the gas channels of the PEMFC in the presence of disturbances. The reaction rates and water transport terms that cross the membrane are considered as unknown unmatched disturbances of the model, henceforth the implementation of a disturbance observer to estimate them. Simulation results of the proposed solution are provided and discussed., This work has been partially funded by the Spanish national project MESPEM (ref. DPI2011-25649), the Italian MAEIC project RODEO (ref. PGR000152) and the European Project PUMA MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems: A sliding mode approach

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
  • Serra-Prat, María
Trabajo presentado al V Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Tenerife (España) del 5 al 8 de julio de 2015., In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., This work has been partially supported by the Spanish Research and Technology Ministry under project DPI2011-25649, by the Italian MAEIC under project RODEO PGR000152 and by the European Comission under project PUMA-MIND FP7-303419., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila
  • D'Elia, Gaia
  • Roda, Vicente
Trabajo presentado al V Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries celebrado en Tenerife (España) del 5 al 8 de julio de 2015., The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., This work is partially funded by the Spanish national MICINN project DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila Peter|||0000-0001-8503-3837
  • D'Elia, Gaia
  • Roda Serrat, Vicente
The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of an adaptive extremum seeking algorithm for hydrogen minimization in PEM fuel cell based systems

  • Kunusch, Cristian
  • Castaños Luna, Fernando
This work presents initial experimental results of an adaptive sliding-mode extremum seeker that minimizes the hydrogen consumption in a fuel cell based system. The extremum seeker is based on the classical steepest-descent method, the main challenge being the fact that the gradient of the objective function is unknown. The gradient is estimated by means of a sliding-mode adaptive estimator. The strategy is applied in experimental practical situations in a fuel cell test bench, this allows to asses the performance of the scheme as well as the difficulties that arise in real applications, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter nonlinear state observer with unmatched disturbance estimation for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
In this paper a nonlinear state observer based on a distributed parameter model is proposed for a proton exchange membrane fuel cell (PEMFC). The estimation technique is implemented using a model-based nonlinear observer with a nonlinear disturbance observer in parallel. To implement the model, a finite element discretisation is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the observer synthesis procedure. By means of this double observation technique it is possible to reconstruct the gases concentrations internal states in the gas channels of the PEMFC in the presence of disturbances. The reaction rates and water transport terms that cross the membrane are considered as unknown unmatched disturbances of the model, henceforth the implementation of a disturbance observer to estimate them. Simulation results of the proposed solution are provided and discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control de temperatura en pilas de combustible tipo PEM de cátodo abierto

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Riera, Jordi (Riera Colomer)
  • Costa Castelló, Ramon|||0000-0003-2553-5901
En este trabajo se analiza el modelo de una pila de combustible tipo PEM de cátodo abierto. Se caracterizan sus puntos de equilibrio. Se analiza el plano de fase del modelo alrededor de diferentes puntos de operación y se plantea una linearización del comportamiento del sistema. Finalmente se plantea un diseño basado en control robusto. Este diseño se valida con el modelo completo., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños Luna, Fernando
We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, Michel
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Riera, Jordi (Riera Colomer)
  • Serra, Maria|||0000-0002-9885-8093
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles|||0000-0002-6088-6187
  • Serra, Maria|||0000-0002-9885-8093
  • Massana Hugas, Immaculada|||0000-0002-1089-4525
This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work.// Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno Pérez, Jaime
  • Angulo, M.
In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles|||0000-0002-6088-6187
  • Massana Hugas, Immaculada|||0000-0002-1089-4525
  • Serra, Maria|||0000-0002-9885-8093
Distributed parameter modeling is required to accurately consider space variations, which are important regarding the performance and durability of the Proton Exchange Membrane Fuel Cells (PEMFC) [1-3]. However, the number of differential and algebraic equations (DAE) obtained from the discretization of a set of partial differential equations (PDE) is very large, and this not only slows down the numerical simulations, but also complicates the design of online model-based controllers. The inclusion of complex DAE models within model-based control schemes requires a previous simplification. A method to simplify complex models consists of reducing the order while preserving the relationship between certain input and output variables, determined from the control objectives. These Model Order Reduction (MOR) techniques have been extended to DAE systems [4]. This work focuses on obtaining an order reduced model, from a PEMFC anode gas channel PDE model, which incorporates the effects of distributed parameters that are relevant for the proper functioning and performance of PEMFC. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply MOR techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear PDE model.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas Fernández, José David
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Kunusch, Cristian
In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Husar, Attila Peter|||0000-0001-8503-3837
The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems : a sliding mode approach

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Serra, Maria|||0000-0002-9885-8093
In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cells

  • Bianchi, Fernando Daniel|||0000-0001-7332-6501
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC) facing oxygen stoichiometry regulation. In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFC systems present highly nonlinear behaviors that demand nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. The control strategy is applied to a couple of experimental practical situations in a laboratory fuel cell system, to evaluate not only the performance but also the difficulties that can arise in real applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria|||0000-0002-9885-8093
  • Batlle Arnau, Carles|||0000-0002-6088-6187
En este trabajo se ha desarrollado una herramienta de simulación para pilas de combustible tipo PEM, basada en un modelo de parámetros distribuidos. La herramienta está diseñada para realizar estudios de variaciones espaciales y temporales a lo largo de los canales de alimentación de reactantes. El trabajo muestra y analiza los resultados de simulación de una monocelda monocanal. Las variables estudiadas son las concentraciones de los reactantes, presiones, temperaturas, humidificación, contenido de agua de la membrana, corriente, entre otras que influyen significativamente sobre el rendimiento y durabilidad de las pilas PEM., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental analysis of a degraded open-cathode PEM fuel cell stack

  • Strahl, Stephan
  • Gasamans Rodríguez, Noemí
  • Llorca Piqué, Jordi
  • Husar, Attila Peter
The well-known challenges to be overcome in PEM fuel cell research are their relatively low durability and high costs for the platinum catalysts. Thus, this work focuses on factors that impact durability and the links to the fuel cell performance. Therefore a degraded, open-cathode, 20-cell, PEM fuel cell stack, which was used in a laboratory test station for characterization experiments, was analyzed experimentally. Voltage transients during external perturbations, such as changing temperature, humidity and stoichiometries show that degradation affects individual cells quite differently throughout the lifetime of the stack. Electrochemical impedance spectroscopy (EIS) data presents non-reversible catalyst layer and membrane degradation of several cells. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) are in progress in order to validate the results of the electrical analysis and elucidate catalyst and membrane degradation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter model simulation tool for PEM fuel cells

  • Sarmiento Carnevali, María Laura
  • Serra, Maria
  • Batlle Arnau, Carles
En este trabajo se ha desarrollado una herramienta de simulación para pilas de combustible tipo PEM, basada en un modelo de parámetros distribuidos. La herramienta está diseñada para realizar estudios de variaciones espaciales y temporales a lo largo de los canales de alimentación de reactantes. El trabajo muestra y analiza los resultados de simulación de una monocelda monocanal. Las variables estudiadas son las concentraciones de los reactantes, presiones, temperaturas, humidificación, contenido de agua de la membrana, corriente, entre otras que influyen significativamente sobre el rendimiento y durabilidad de las pilas PEM., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Identification and observation in the anode line of PEM fuel cell stacks

  • Kunusch, Cristian
  • Moreno Pérez, Jaime
  • Angulo, M.
In this work, some potential identification/observation problems that arise in the anode line of a typical Polymer Electrolyte Membrane (PEM) fuel cell based system are highlighted and then solved. They involve estimating the hydrogen input flow at the stack anode and the water transport across the membrane. It is argued that estimating the membrane water transport is of special interest since it gives relevant information on the actual performance and state of the fuel cell. Both problems are solved by constructing robust observers and parameter identification algorithms based on the Generalized Super-Twisting Algorithm., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental decoupling of single cell polarization losses

  • Husar, Attila Peter
  • D'Elia, Gaia
  • Roda Serrat, Vicente
The decoupling of the current sweep with the Ohmic resistance is a very powerful tool to determine the magnitude of the voltage losses inside of a fuel cell. In a time frame of seconds, the fuel cell can be diagnosed and critical information on the state of the membrane, catalyst and diffusion layer can be assessed. The losses determined by this technique are the Ohmic, mass transport and activation. With this technique flooding and dry can be isolated and degradation studies can be made. Finally, this technique can be applied to a real system were this data can be used to improve control strategies for performance and durability when integrated in to a model based controller., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State observers design for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Husar, Attila Peter
  • Serra, Maria
This work presents the development of a nonlinear state observer to estimate the values of the different gas species concentration profiles in a Proton Exchange Membrane Fuel Cell (PEMFC) energy system. The selection of the estimated states is based on the functionality and performance of the observer. The implementation is based on the discretization of a PEMFC distributed 1+1D model. Forward and backwards discretization of the partial derivative equations is performed to take advantage of the boundary conditions of the problem. A second-order sliding-mode control super-twisting corrective input action is implemented to reduce the estimation error to zero in a finite amount of time. Simulation results are presented to show the performance of the observer to estimate the values of the states and to extract conclusions for future research work.// Este trabajo presenta el desarrollo de un observador de estados no lineal para la estimación de los perfiles de concentraciones en un sistema de energía basado en una Pila de Combustible de Membrana de Intercambio Protónico (PEMFC). La selección desempeño del observador. Las ecuaciones en derivadas parciales son discretizadas en dos sentidos un modelo 1+1D para aprovechar las condiciones de contorno del problema. Una acción de en métodos deslizantes de segundo orden es implementada para reducir el error de estimación a cero en un periodo finito de tiempo. Se presentan resultados de simulación para mostrar el rendimiento del observador reconstrucción de los valores de los estados y para extraer conclusiones para futuro trabajo de investigación., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Thermal modelling approach and model predictive control of a water-cooled PEM fuel cell system

  • Rojas Fernández, José David
  • Ocampo-Martínez, Carlos
  • Kunusch, Cristian
In this paper, a modular thermal modelling approach for a water-cooled Proton Exchange Membrane fuel cell (PEM-FC) stack is proposed. The resultant model is based on the heat flux inside the stack and has been validated in a real test station. Then, a linear model predictive control (MPC) strategy for temperature regulation is designed and tested in simulation with promising results. The proposed MPC controller not only tackles the temperature regulation problem, but also incorporates necessary management constraints for the proper operation of the system in real conditions., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Perrier, Michel
  • Husar, Attila Peter
  • Riera, Jordi (Riera Colomer)
  • Serra, Maria
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimization strategies. The experimental analysis shows the great potential of improving the system performance by proper temperature management. The most significant temperature dependent parameters of the system under study are the activation polarization and the water content of the ionomer of the catalyst layer. An Extremum seeking control algorithm is proposed to regulate the temperature to a voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management via model-free control strategies., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Online identification of time varying parameters in PEM fuel cells

  • Kunusch, Cristian
This article tackles some ideas about parameters identification in the anode line of a typical PEM fuel cell test station. The approach is focused in the nonlinear model structure and solves an observation problem using a system transformation and Kalman filtering. Simulation results are presented to show the feasibility of the proposal., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Order reduction of a distributed parameter PEM fuel cell anode gas channel model

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles
  • Massana Hugas, Immaculada
  • Serra, Maria
Distributed parameter modeling is required to accurately consider space variations, which are important regarding the performance and durability of the Proton Exchange Membrane Fuel Cells (PEMFC) [1-3]. However, the number of differential and algebraic equations (DAE) obtained from the discretization of a set of partial differential equations (PDE) is very large, and this not only slows down the numerical simulations, but also complicates the design of online model-based controllers. The inclusion of complex DAE models within model-based control schemes requires a previous simplification. A method to simplify complex models consists of reducing the order while preserving the relationship between certain input and output variables, determined from the control objectives. These Model Order Reduction (MOR) techniques have been extended to DAE systems [4]. This work focuses on obtaining an order reduced model, from a PEMFC anode gas channel PDE model, which incorporates the effects of distributed parameters that are relevant for the proper functioning and performance of PEMFC. The original model is an in-house MATLAB® code, flexible enough to manipulate the underlying model equations and apply MOR techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear PDE model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extremum seeking algorithms for minimal hydrogen consumption in PEM fuel cells

  • Kunusch, Cristian
  • Castaños Luna, Fernando
We present an adaptive sliding-mode extremum seeker that minimizes an unknown function that is subject to an unknown static constraint. The same algorithm can be applied when the static constraint is replaced by a dynamic one, provided that the dynamics possess strong stability properties. The application and feasibility study is focused on hydrogen consumption minimization in PEM fuel cell based systems., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State estimation in fuel cell systems : a sliding mode approach

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
In this paper, a nonlinear distributed parameter observer (NDOP) is developed for the estimation of the internal condi-tions of a proton exchange membrane fuel cell (PEMFC). In particular, the estimation of the internal concentration values for different gas species is studied. A novel high order sliding mode (HOSM) estimation technique, based on a distributed parameter model of a PEMFC is developed to reconstruct the internal variables. The observer includes the estimation of the reaction and water transport terms, which are considered as disturbances of the PEMFC estimation model. Since the approach is based on a distributed parameter model representation of the PEMFC, the observer is capable of reconstruct the full internal profile of the estimated variables. The performance and robustness of the proposed observation technique is tested through a simulation example around different operation points., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter PEMFC model order reduction

  • Sarmiento Carnevali, María Laura
  • Batlle Arnau, Carles
  • Serra, Maria
  • Massana Hugas, Immaculada
This work focuses on obtaining an order-reduced model from a nonlinear single PEMFC model, which incorporates the effects of distributed parameters that are relevant for its proper functioning and performance. The original model is an in-house MATLAB code, flexible enough to manipulate the underlying model equations and apply model order reduction (MOR) techniques. The obtained order-reduced model is suitable to perform numerical simulations and design efficient controllers for the original nonlinear partial differential equations (PDE) model., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of gain-scheduled LPV control for oxygen stoichiometry regulation in PEM fuel cells

  • Bianchi, Fernando Daniel
  • Kunusch, Cristian
  • Ocampo-Martínez, Carlos
  • Sánchez Peña, Ricardo Salvador
The article addresses the LPV control of a Polymer Electrolyte Membrane Fuel Cell (PEMFC) facing oxygen stoichiometry regulation. In order to optimize efficiency, PEMFCs require reliable control systems ensuring stability and performance, as well as robustness to model uncertainties and external perturbations. On the other hand, PEMFC systems present highly nonlinear behaviors that demand nonlinear and/or adaptive control strategies to achieve high performance in the entire operating range. Here, a linear parameter varying (LPV) gain scheduled control is proposed. The control is based on a piecewise affine LPV representation of the PEMFC, a model that can be available in practice. The control strategy is applied to a couple of experimental practical situations in a laboratory fuel cell system, to evaluate not only the performance but also the difficulties that can arise in real applications., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Observation of the electrochemically active surface area in a proton exchange membrane fuel cell

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper a methodology for the estimation of the Electrochemically active Surface Area (ECSA) of a Proton Exchange Membrane Fuel Cell (PEMFC) is developed. Specifically, the ECSA in the Cathode Catalyst Layer (CCL) is estimated, which makes it possible to quantify the amount of active platinum (Pt) in the CCL. In order to estimate the ECSA, the internal conditions of the PEMFC have to be known. A model-based observer for the distributed parameter dynamics is designed. From the observation of the distributed states, the ECSA can be estimated as well. With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the CCL. The results of the methodology are discussed in a simulation environment using the New European Driving Cycle (NEDC) as a case study., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed parameter nonlinear state observer with unmatched disturbance estimation for PEMFC systems

  • Luna Pacho, Julio Alberto
  • Usai, Elio
  • Husar, Attila Peter
  • Serra, Maria
In this paper a nonlinear state observer based on a distributed parameter model is proposed for a proton exchange membrane fuel cell (PEMFC). The estimation technique is implemented using a model-based nonlinear observer with a nonlinear disturbance observer in parallel. To implement the model, a finite element discretisation is performed to take advantage of the boundary conditions of the problem and also to apply lumped systems theory in the observer synthesis procedure. By means of this double observation technique it is possible to reconstruct the gases concentrations internal states in the gas channels of the PEMFC in the presence of disturbances. The reaction rates and water transport terms that cross the membrane are considered as unknown unmatched disturbances of the model, henceforth the implementation of a disturbance observer to estimate them. Simulation results of the proposed solution are provided and discussed., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control de temperatura en pilas de combustible tipo PEM de cátodo abierto

  • Strahl, Stephan
  • Husar, Attila Peter
  • Riera, Jordi (Riera Colomer)
  • Costa Castelló, Ramon
En este trabajo se analiza el modelo de una pila de combustible tipo PEM de cátodo abierto. Se caracterizan sus puntos de equilibrio. Se analiza el plano de fase del modelo alrededor de diferentes puntos de operación y se plantea una linearización del comportamiento del sistema. Finalmente se plantea un diseño basado en control robusto. Este diseño se valida con el modelo completo., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On the implementation of an adaptive extremum seeking algorithm for hydrogen minimization in PEM fuel cell based systems

  • Kunusch, Cristian
  • Castaños Luna, Fernando
This work presents initial experimental results of an adaptive sliding-mode extremum seeker that minimizes the hydrogen consumption in a fuel cell based system. The extremum seeker is based on the classical steepest-descent method, the main challenge being the fact that the gradient of the objective function is unknown. The gradient is estimated by means of a sliding-mode adaptive estimator. The strategy is applied in experimental practical situations in a fuel cell test bench, this allows to asses the performance of the scheme as well as the difficulties that arise in real applications, Peer Reviewed, Postprint (author’s final draft)