Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The Mont-Blanc prototype: an alternative approach for HPC systems

  • Rajovic, Nikola
  • Rico, Alejandro
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Ruiz, Daniel
  • Vlarrubi, Josep O.
  • Gomez, Constantino
  • Backes, Luna
  • Nieto, Diego
  • Servat, Harald
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Adeniyi-Jones, Chris
  • Derradji, Said
  • Gloaguen, Hervé
  • Lanucara, Piero
  • Sanna, Nico
  • Mehaut, Jean-François
  • Pouget, Kevin
  • Videau, Brice
  • Boyer, Eric
  • Allalen, Momme
  • Auweter, Axel
  • Brayford, David
  • Tafani, Daniele
  • Weinberg, Volker
  • Brömmel, Dirk
  • Halver, René
  • Meinke, Jan H.
  • Beivide Palacio, Ramon
  • Benito, Mariano
  • Vallejo, Enrique
  • Valero Cortés, Mateo|||0000-0003-2917-2482
  • Ramirez, Alex
High-performance computing (HPC) is recognized as one of the pillars for further progress in science, industry, medicine, and education. Current HPC systems are being developed to overcome emerging architectural challenges in order to reach Exascale level of performance, projected for the year 2020. The much larger embedded and mobile market allows for rapid development of intellectual property (IP) blocks and provides more flexibility in designing an application specific system-on-chip (SoC), in turn providing the possibility in balancing performance, energy-efficiency, and cost. In the Mont-Blanc project, we advocate for HPC systems being built from such commodity IP blocks, currently used in embedded and mobile SoCs. As a first demonstrator of such an approach, we present the Mont-Blanc prototype; the first HPC system built with commodity SoCs, memories, and network interface cards (NICs) from the embedded and mobile domain, and off-the-shelf HPC networking, storage, cooling, and integration solutions. We present the system’s architecture and evaluate both performance and energy efficiency. Further, we compare the system’s abilities against a production level supercomputer. At the end, we discuss parallel scalability and estimate the maximum scalability point of this approach across a set of applications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Computational Fluid and Particle Dynamics Simulations for Respiratory System: Runtime Optimization on an Arm Cluster

  • Garcia-Gasulla, Marta
  • Josep-Fabrego, Marc
  • Eguzkitza, Beatriz|||0000-0002-3302-6667
  • Mantovani, Filippo|||0000-0003-3559-4825
Computational fluid and particle dynamics simulations (CFPD) are of paramount importance for studying and improving drug effectiveness. Computational requirements of CFPD codes involves high-performance computing (HPC) resources. For these reasons we introduce and evaluate in this paper system software techniques for improving performance and tolerate load imbalance on a state-of-the-art production CFPD code. We demonstrate benefits of these techniques on both Intel- and Arm-based HPC clusters showing the importance of using mechanisms applied at runtime to improve the performance independently of the underlying architecture. We run a real CFPD simulation of particle tracking on the human respiratory system, showing performance improvements of up to 2X, keeping the computational resources constant., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology project (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European Mont-Blanc projects (288777, 610402 and 671697)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Filling the gap between education and industry: evidence-based methods for introducing undergraduate students to HPC

  • Mantovani, Filippo|||0000-0003-3559-4825
  • Banchelli, Fabio
Educational institutions provide in most cases basic theoretical background covering several computational science topics, however High Performance Computing (HPC) and Parallel and Distributed Computing (PDC) markets require specialized technical profiles. Even the most skilled students are often not prepared to face production HPC applications of thousands of lines nor complex computational frameworks from other disciplines nor heterogeneous multinode machines accessed by hundreds of users. In this paper, we offer an educational package for filling this gap. Leveraging the 4-years experience of the Student Cluster Competition, we present our educational journey together with the lessons learned and the outcomes of our methodology. We show how, in a time span of a semester and an affordable budget, a university can implement an educational package preparing pupils for starting competitive professional careers. Our findings also highlight that 78% of the students exposed to our methods remain within the HPC high-education, research or industry., The authors of this paper and the participants in the SCC have been supported by the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697; the HPC Advisory Council; the Facultat d’Informàtica de Barcelona – Universitat Politècnica de Catalunya; Arm Ltd.; Cavium Inc.; E4 Computer Engineering. We warmly thank Luna Backes Drault for her unconditioned dedication to the SCC cause in the early days and the pizzeria 7bello in Frankfurt for always having a table and a smile for us., Si
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel|||0000-0002-1973-8289
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Mantovani, Filippo|||0000-0003-3559-4825
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Advanced Performance Analysis of HPC Workloads on Cavium ThunderX

  • Calore, Enrico
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Ruiz, Daniel
The interest towards Arm based platforms as HPC solutions increased significantly during the last 5 years. In this paper we show that, in contrast to the early days of pioneer tests, several application performance analysis techniques can now be applied also to Arm based SoCs. To show the possibilities offered by the available tools, we provide as an example, the analysis of a Lattice Boltzmann HPC production code, highly optimized for several architectures and now ported also to Armv8. We tested it on a system based on a production silicon, Cavium CN8890 SoC. In particular, as performance analysis tools we adopt Extrae and Paraver, making use of the PAPI support, initially developed by us for the ThunderX platform, and now available also upstream. The contribution of this paper is twofold: first, we demonstrate that performance analysis tools available on standard HPC platforms, independently from the CPU providers, are nowadays available also for Arm SoCs; second, we actually optimize an HPC application for this platforms, showing similarities with other architectures., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [15], grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Università degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”. Cavium Inc. has kindly supported this research providing access to documentation and platforms.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multi-Node Advanced Performance and Power Analysis with Paraver

  • Mantovani, Filippo|||0000-0003-3559-4825
  • Calore, Enrico
Performance analysis tools allow application developers to identify and characterize the inefficiencies that cause performance degradation in their codes. Due to the increasing interest in the High Performance Computing (HPC) community towards energy-efficiency issues, it is of paramount importance to be able to correlate performance and power figures within the same profiling and analysis tools. For this reason, we present a preliminary performance and energy-efficiency study aimed at demonstrating how a single tool can be used to collect most of the relevant metrics. Moreover we show how the same analysis techniques are applicable on different architectures, analyzing the same HPC application running on two clusters, based respectively on Intel Haswell and Arm Cortex-A57 CPUs., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Universit`a degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

POSTER: Exploiting asymmetric multi-core processors with flexible system sofware

  • Chronaki, Kallia
  • Moretó Planas, Miquel|||0000-0002-9848-8758
  • Casas, Marc|||0000-0003-4564-2093
  • Rico, Alejandro
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Valero Cortés, Mateo|||0000-0003-2917-2482
Energy efficiency has become the main challenge for high performance computing (HPC). The use of mobile asymmetric multi-core architectures to build future multi-core systems is an approach towards energy savings while keeping high performance. However, it is not known yet whether such systems are ready to handle parallel applications. This paper fills this gap by evaluating emerging parallel applications on an asymmetric multi-core. We make use of the PARSEC benchmark suite and a processor that implements the ARM big.LITTLE architecture. We conclude that these applications are not mature enough to run on such systems, as they suffer from load imbalance. Furthermore, we explore the behaviour of dynamic scheduling solutions on either the Operating System (OS) or the runtime level. Comparing these approaches shows us that the most efficient scheduling takes place in the runtime level, influencing the future research towards such solutions., This work has been supported by the Spanish Government (SEV2015-0493), by the Spanish Ministry of Science and Innovation (contracts TIN2015-65316-P), by Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), by the RoMoL ERC Advanced Grant (GA 321253) and the European HiPEAC Network of Excellence. The Mont-Blanc project receives funding from the EU's Seventh Framework Programme (FP7/2007-2013) under grant agreement number 610402 and from the EU's H2020 Framework Programme (H2020/2014-2020) under grant agreement number 671697. M. Moretó has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047. M. Casas is supported by the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Cofund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union (Contract 2013 BP B 00243)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extending OmpSs for OpenCL kernel co-execution in heterogeneous systems

  • Pérez, Borja
  • Stafford, Esteban
  • Bosque, Jose L.
  • Beivide Palacio, Ramon
  • Mateo, Sergi
  • Teruel, Xavier
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Heterogeneous systems have a very high potential performance but present difficulties in their programming. OmpSs is a well known framework for task based parallel applications, which is an interesting tool to simplify the programming of these systems. However, it does not support the co-execution of a single OpenCL kernel instance on several compute devices. To overcome this limitation, this paper presents an extension of the OmpSs framework that solves two main objectives: the automatic division of datasets among several devices and the management of their memory address spaces. To adapt to different kinds of applications, the data division can be performed by the novel HGuided load balancing algorithm or by the well known Static and Dynamic. All this is accomplished with negligible impact on the programming. Experimental results reveal that there is always one load balancing algorithm that improves the performance and energy consumption of the system., This work has been supported by the University of Cantabria with grant CVE-2014-18166, the Generalitat de Catalunya under grant 2014-SGR-1051, the Spanish Ministry of Economy, Industry and Competitiveness under contracts TIN2016- 76635-C2-2-R (AEI/FEDER, UE) and TIN2015-65316-P. The Spanish Government through the Programa Severo Ochoa (SEV-2015-0493). The European Research Council under grant agreement No 321253 European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc Projects, grant agreement n 288777, 610402 and 671697 and the European HiPEAC Network., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Is Arm software ecosystem ready for HPC?

  • Banchelli Gracia, Fabio F.
  • Ruiz, Daniel
  • Hao Xu Lin, Ying
  • Mantovani, Filippo|||0000-0003-3559-4825
In recent years, the HPC community has increasingly grown its interest towards the Arm architecture with research projects targeting primarily the installation of Arm-based clusters. State of the art research project examples are the European Mont-Blanc, the Japanese Post-K, and the UKs GW4/EPSRC. Primarily attention is usually given to hardware platforms, and the Arm HPC community is growing as the hardware is evolving towards HPC workloads via solutions borrowed from mobile market e.g., big.LITTLE and additions such as Armv8-A Scalable Vector Extension (SVE) technology. However the availability of a mature software ecosystem and the possibility of running large and complex HPC applications plays a key role in the consolidation process of a new technology, especially in a conservative market like HPC. For this reason in this poster we present a preliminary evaluation of the Arm system software ecosystem, limited here to the Arm HPC Compiler and the Arm Performance Libraries, together with a porting and testing of three fairly complex HPC code suites: QuantumESPRESSO, WRF and FEniCS. The selection of these codes has not been totally random: they have been in fact proposed as HPC challenges during the last two editions of the Student Cluster Competition at ISC where all the authors have been involved operating an Arm-based cluster and awarded with the Fan Favorite award., The research leading to these results has received funding from the European Community's Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [3], grant agreements n. 288777, 610402 and 671697. The authors would also like to thank E4 Computer Engineering for providing part of the hardware resources needed for the evaluation carried out in this poster as well as for greatly supporting the Student Cluster Competition team.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hipster: hybrid task manager for latency-critical cloud workloads

  • Nishtala, Rajiv
  • Carpenter, Paul Matthew
  • Petrucci, Vinicius
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
In 2013, U. S. data centers accounted for 2.2% of the country's total electricity consumption, a figure that is projected to increase rapidly over the next decade. Many important workloads are interactive, and they demand strict levels of quality-of-service (QoS) to meet user expectations, making it challenging to reduce power consumption due to increasing performance demands. This paper introduces Hipster, a technique that combines heuristics and reinforcement learning to manage latency-critical workloads. Hipster's goal is to improve resource efficiency in data centers while respecting the QoS of the latency-critical workloads. Hipster achieves its goal by exploring heterogeneous multi-cores and dynamic voltage and frequency scaling (DVFS). To improve data center utilization and make best usage of the available resources, Hipster can dynamically assign remaining cores to batch workloads without violating the QoS constraints for the latency-critical workloads. We perform experiments using a 64-bit ARM big.LITTLE platform, and show that, compared to prior work, Hipster improves the QoS guarantee for Web-Search from 80% to 96%, and for Memcached from 92% to 99%, while reducing the energy consumption by up to 18%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Energy Analysis of a 4D Variational Data Assimilation Algorithm and Evaluation on ARM-Based HPC Systems

  • Arcucci, Rossella
  • Basciano, Davide
  • Cilardo, Alessandro
  • D'Amore, Luisa
  • Mantovani, Filippo|||0000-0003-3559-4825
Driven by the emerging requirements of High Performance Computing (HPC) architectures, the main focus of this work is the interplay of computational and energetic aspects of a Four Dimensional Variational (4DVAR) Data Assimilation algorithm, based on Domain Decomposition (named DD-4DVAR). We report first results on the energy consumption of the DD-4DVAR algorithm on embedded processor and a mathematical analysis of the energy behavior of the algorithm by assuming the architectures characteristics as variable of the model. The main objective is to capture the essential operations of the algorithm exhibiting a direct relationship with the measured energy. The experimental evaluation is carried out on a set of mini-clusters made available by the Barcelona Supercomputing Center., The research has received funding from European Commission under H2020-MSCA-RISE NASDAC project (grant agreement no. 691184) FP7 Mont-Blanc and Mont-Blanc 2 (grant agreements no. 288777 and 610402), H2020-FET Mont-Blanc 3 (grant agreement 671697)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Is Arm software ecosystem ready for HPC?

  • Banchelli Gracia, Fabio F.
  • Ruiz, Daniel
  • Hao Xu Lin, Ying
  • Mantovani, Filippo
In recent years, the HPC community has increasingly grown its interest towards the Arm architecture with research projects targeting primarily the installation of Arm-based clusters. State of the art research project examples are the European Mont-Blanc, the Japanese Post-K, and the UKs GW4/EPSRC. Primarily attention is usually given to hardware platforms, and the Arm HPC community is growing as the hardware is evolving towards HPC workloads via solutions borrowed from mobile market e.g., big.LITTLE and additions such as Armv8-A Scalable Vector Extension (SVE) technology. However the availability of a mature software ecosystem and the possibility of running large and complex HPC applications plays a key role in the consolidation process of a new technology, especially in a conservative market like HPC. For this reason in this poster we present a preliminary evaluation of the Arm system software ecosystem, limited here to the Arm HPC Compiler and the Arm Performance Libraries, together with a porting and testing of three fairly complex HPC code suites: QuantumESPRESSO, WRF and FEniCS. The selection of these codes has not been totally random: they have been in fact proposed as HPC challenges during the last two editions of the Student Cluster Competition at ISC where all the authors have been involved operating an Arm-based cluster and awarded with the Fan Favorite award., The research leading to these results has received funding from the European Community's Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [3], grant agreements n. 288777, 610402 and 671697. The authors would also like to thank E4 Computer Engineering for providing part of the hardware resources needed for the evaluation carried out in this poster as well as for greatly supporting the Student Cluster Competition team., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extending OmpSs for OpenCL kernel co-execution in heterogeneous systems

  • Pérez, Borja
  • Stafford, Esteban
  • Bosque, Jose L.
  • Beivide Palacio, Ramon
  • Mateo, Sergi
  • Teruel, Xavier
  • Martorell Bofill, Xavier
  • Ayguadé Parra, Eduard
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Heterogeneous systems have a very high potential performance but present difficulties in their programming. OmpSs is a well known framework for task based parallel applications, which is an interesting tool to simplify the programming of these systems. However, it does not support the co-execution of a single OpenCL kernel instance on several compute devices. To overcome this limitation, this paper presents an extension of the OmpSs framework that solves two main objectives: the automatic division of datasets among several devices and the management of their memory address spaces. To adapt to different kinds of applications, the data division can be performed by the novel HGuided load balancing algorithm or by the well known Static and Dynamic. All this is accomplished with negligible impact on the programming. Experimental results reveal that there is always one load balancing algorithm that improves the performance and energy consumption of the system., This work has been supported by the University of Cantabria with grant CVE-2014-18166, the Generalitat de Catalunya under grant 2014-SGR-1051, the Spanish Ministry of Economy, Industry and Competitiveness under contracts TIN2016- 76635-C2-2-R (AEI/FEDER, UE) and TIN2015-65316-P. The Spanish Government through the Programa Severo Ochoa (SEV-2015-0493). The European Research Council under grant agreement No 321253 European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc Projects, grant agreement n 288777, 610402 and 671697 and the European HiPEAC Network., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The Mont-Blanc prototype: an alternative approach for HPC systems

  • Rajovic, Nikola
  • Rico, Alejandro
  • Mantovani, Filippo
  • Ruiz, Daniel
  • Vlarrubi, Josep O.
  • Gomez, Constantino
  • Backes, Luna
  • Nieto, Diego
  • Servat, Harald
  • Martorell Bofill, Xavier
  • Labarta Mancho, Jesús José
  • Ayguadé Parra, Eduard
  • Adeniyi-Jones, Chris
  • Derradji, Said
  • Gloaguen, Hervé
  • Lanucara, Piero
  • Sanna, Nico
  • Mehaut, Jean-François
  • Pouget, Kevin
  • Videau, Brice
  • Boyer, Eric
  • Allalen, Momme
  • Auweter, Axel
  • Brayford, David
  • Tafani, Daniele
  • Weinberg, Volker
  • Brömmel, Dirk
  • Halver, René
  • Meinke, Jan H.
  • Beivide Palacio, Ramon
  • Benito, Mariano
  • Vallejo, Enrique
  • Valero Cortés, Mateo
  • Ramirez, Alex
High-performance computing (HPC) is recognized as one of the pillars for further progress in science, industry, medicine, and education. Current HPC systems are being developed to overcome emerging architectural challenges in order to reach Exascale level of performance, projected for the year 2020. The much larger embedded and mobile market allows for rapid development of intellectual property (IP) blocks and provides more flexibility in designing an application specific system-on-chip (SoC), in turn providing the possibility in balancing performance, energy-efficiency, and cost. In the Mont-Blanc project, we advocate for HPC systems being built from such commodity IP blocks, currently used in embedded and mobile SoCs. As a first demonstrator of such an approach, we present the Mont-Blanc prototype; the first HPC system built with commodity SoCs, memories, and network interface cards (NICs) from the embedded and mobile domain, and off-the-shelf HPC networking, storage, cooling, and integration solutions. We present the system’s architecture and evaluate both performance and energy efficiency. Further, we compare the system’s abilities against a production level supercomputer. At the end, we discuss parallel scalability and estimate the maximum scalability point of this approach across a set of applications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Filling the gap between education and industry: evidence-based methods for introducing undergraduate students to HPC

  • Mantovani, Filippo
  • Banchelli, Fabio
Educational institutions provide in most cases basic theoretical background covering several computational science topics, however High Performance Computing (HPC) and Parallel and Distributed Computing (PDC) markets require specialized technical profiles. Even the most skilled students are often not prepared to face production HPC applications of thousands of lines nor complex computational frameworks from other disciplines nor heterogeneous multinode machines accessed by hundreds of users. In this paper, we offer an educational package for filling this gap. Leveraging the 4-years experience of the Student Cluster Competition, we present our educational journey together with the lessons learned and the outcomes of our methodology. We show how, in a time span of a semester and an affordable budget, a university can implement an educational package preparing pupils for starting competitive professional careers. Our findings also highlight that 78% of the students exposed to our methods remain within the HPC high-education, research or industry., The authors of this paper and the participants in the SCC have been supported by the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697; the HPC Advisory Council; the Facultat d’Informàtica de Barcelona – Universitat Politècnica de Catalunya; Arm Ltd.; Cavium Inc.; E4 Computer Engineering. We warmly thank Luna Backes Drault for her unconditioned dedication to the SCC cause in the early days and the pizzeria 7bello in Frankfurt for always having a table and a smile for us., Si, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Implementation of the K-Means Algorithm on Heterogeneous Devices: A Use Case Based on an Industrial Dataset

  • Xu, Ying hao
  • Vidal, Miquel
  • Arejita, Beñat
  • Diaz, Javier
  • Alvarez, Carlos
  • Jiménez González, Daniel
  • Martorell Bofill, Xavier
  • Mantovani, Filippo
This paper presents and analyzes a heterogeneous implementation of an industrial use case based on K-means that targets symmetric multiprocessing (SMP), GPUs and FPGAs. We present how the application can be optimized from an algorithmic point of view and how this optimization performs on two heterogeneous platforms. The presented implementation relies on the OmpSs programming model, which introduces a simplified pragma-based syntax for the communication between the main processor and the accelerators. Performance improvement can be achieved by the programmer explicitly specifying the data memory accesses or copies. As expected, the newer SMP+GPU system studied is more powerful than the older SMP+FPGA system. However the latter is enough to fulfill the requirements of our use case and we show that uses less energy when considering only the active power of the execution., This work is partially supported by the European Union H2020 project AXIOM (grant agreement n. 645496), HiPEAC (grant agreement n. 687698), and Mont-Blanc (grant agreements n. 288777, 610402 and 671697), the Spanish Government Programa Severo Ochoa (SEV-2015-0493), the Spanish Ministry of Science and Technology (TIN2015- 65316-P) and the Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya, under project MPEXPAR: Models de Programaci´o i Entorns d’Execució Paral·lels (2014-SGR-1051)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multi-Node Advanced Performance and Power Analysis with Paraver

  • Mantovani, Filippo
  • Calore, Enrico
Performance analysis tools allow application developers to identify and characterize the inefficiencies that cause performance degradation in their codes. Due to the increasing interest in the High Performance Computing (HPC) community towards energy-efficiency issues, it is of paramount importance to be able to correlate performance and power figures within the same profiling and analysis tools. For this reason, we present a preliminary performance and energy-efficiency study aimed at demonstrating how a single tool can be used to collect most of the relevant metrics. Moreover we show how the same analysis techniques are applicable on different architectures, analyzing the same HPC application running on two clusters, based respectively on Intel Haswell and Arm Cortex-A57 CPUs., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects, grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Universit`a degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

POSTER: Exploiting asymmetric multi-core processors with flexible system sofware

  • Chronaki, Kallia
  • Moretó Planas, Miquel
  • Casas, Marc
  • Rico, Alejandro
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
  • Valero Cortés, Mateo
Energy efficiency has become the main challenge for high performance computing (HPC). The use of mobile asymmetric multi-core architectures to build future multi-core systems is an approach towards energy savings while keeping high performance. However, it is not known yet whether such systems are ready to handle parallel applications. This paper fills this gap by evaluating emerging parallel applications on an asymmetric multi-core. We make use of the PARSEC benchmark suite and a processor that implements the ARM big.LITTLE architecture. We conclude that these applications are not mature enough to run on such systems, as they suffer from load imbalance. Furthermore, we explore the behaviour of dynamic scheduling solutions on either the Operating System (OS) or the runtime level. Comparing these approaches shows us that the most efficient scheduling takes place in the runtime level, influencing the future research towards such solutions., This work has been supported by the Spanish Government (SEV2015-0493), by the Spanish Ministry of Science and Innovation (contracts TIN2015-65316-P), by Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), by the RoMoL ERC Advanced Grant (GA 321253) and the European HiPEAC Network of Excellence. The Mont-Blanc project receives funding from the EU's Seventh Framework Programme (FP7/2007-2013) under grant agreement number 610402 and from the EU's H2020 Framework Programme (H2020/2014-2020) under grant agreement number 671697. M. Moretó has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047. M. Casas is supported by the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia and the Cofund programme of the Marie Curie Actions of the 7th R&D Framework Programme of the European Union (Contract 2013 BP B 00243)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energy Analysis of a 4D Variational Data Assimilation Algorithm and Evaluation on ARM-Based HPC Systems

  • Arcucci, Rossella
  • Basciano, Davide
  • Cilardo, Alessandro
  • D'Amore, Luisa
  • Mantovani, Filippo
Driven by the emerging requirements of High Performance Computing (HPC) architectures, the main focus of this work is the interplay of computational and energetic aspects of a Four Dimensional Variational (4DVAR) Data Assimilation algorithm, based on Domain Decomposition (named DD-4DVAR). We report first results on the energy consumption of the DD-4DVAR algorithm on embedded processor and a mathematical analysis of the energy behavior of the algorithm by assuming the architectures characteristics as variable of the model. The main objective is to capture the essential operations of the algorithm exhibiting a direct relationship with the measured energy. The experimental evaluation is carried out on a set of mini-clusters made available by the Barcelona Supercomputing Center., The research has received funding from European Commission under H2020-MSCA-RISE NASDAC project (grant agreement no. 691184) FP7 Mont-Blanc and Mont-Blanc 2 (grant agreements no. 288777 and 610402), H2020-FET Mont-Blanc 3 (grant agreement 671697)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Computational Fluid and Particle Dynamics Simulations for Respiratory System: Runtime Optimization on an Arm Cluster

  • Garcia-Gasulla, Marta
  • Josep-Fabrego, Marc
  • Eguzkitza, Beatriz
  • Mantovani, Filippo
Computational fluid and particle dynamics simulations (CFPD) are of paramount importance for studying and improving drug effectiveness. Computational requirements of CFPD codes involves high-performance computing (HPC) resources. For these reasons we introduce and evaluate in this paper system software techniques for improving performance and tolerate load imbalance on a state-of-the-art production CFPD code. We demonstrate benefits of these techniques on both Intel- and Arm-based HPC clusters showing the importance of using mechanisms applied at runtime to improve the performance independently of the underlying architecture. We run a real CFPD simulation of particle tracking on the human respiratory system, showing performance improvements of up to 2X, keeping the computational resources constant., This work is partially supported by the Spanish Government (SEV-2015-0493), by the Spanish Ministry of Science and Technology project (TIN2015-65316-P), by the Generalitat de Catalunya (2017-SGR-1414), and by the European Mont-Blanc projects (288777, 610402 and 671697)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hipster: hybrid task manager for latency-critical cloud workloads

  • Nishtala, Rajiv
  • Carpenter, Paul Matthew
  • Petrucci, Vinicius
  • Martorell Bofill, Xavier
In 2013, U. S. data centers accounted for 2.2% of the country's total electricity consumption, a figure that is projected to increase rapidly over the next decade. Many important workloads are interactive, and they demand strict levels of quality-of-service (QoS) to meet user expectations, making it challenging to reduce power consumption due to increasing performance demands. This paper introduces Hipster, a technique that combines heuristics and reinforcement learning to manage latency-critical workloads. Hipster's goal is to improve resource efficiency in data centers while respecting the QoS of the latency-critical workloads. Hipster achieves its goal by exploring heterogeneous multi-cores and dynamic voltage and frequency scaling (DVFS). To improve data center utilization and make best usage of the available resources, Hipster can dynamically assign remaining cores to batch workloads without violating the QoS constraints for the latency-critical workloads. We perform experiments using a 64-bit ARM big.LITTLE platform, and show that, compared to prior work, Hipster improves the QoS guarantee for Web-Search from 80% to 96%, and for Memcached from 92% to 99%, while reducing the energy consumption by up to 18%., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Advanced Performance Analysis of HPC Workloads on Cavium ThunderX

  • Calore, Enrico
  • Mantovani, Filippo
  • Ruiz, Daniel
The interest towards Arm based platforms as HPC solutions increased significantly during the last 5 years. In this paper we show that, in contrast to the early days of pioneer tests, several application performance analysis techniques can now be applied also to Arm based SoCs. To show the possibilities offered by the available tools, we provide as an example, the analysis of a Lattice Boltzmann HPC production code, highly optimized for several architectures and now ported also to Armv8. We tested it on a system based on a production silicon, Cavium CN8890 SoC. In particular, as performance analysis tools we adopt Extrae and Paraver, making use of the PAPI support, initially developed by us for the ThunderX platform, and now available also upstream. The contribution of this paper is twofold: first, we demonstrate that performance analysis tools available on standard HPC platforms, independently from the CPU providers, are nowadays available also for Arm SoCs; second, we actually optimize an HPC application for this platforms, showing similarities with other architectures., The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] and Horizon 2020 under the Mont-Blanc projects [15], grant agreements n. 288777, 610402 and 671697. E.C. was partially founded by “Contributo 5 per mille assegnato all’Università degli Studi di Ferrara - dichiarazione dei redditi dell’anno 2014”. Cavium Inc. has kindly supported this research providing access to documentation and platforms., Postprint (author's final draft)