Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effects of kinematic boundary conditions on trench curvature in a retreating subduction zone: insights from analog modelling

  • Fernández Ortiga, Manel
  • Kumar, Ajay
  • Peral, M.
  • Funiciello, Francesca
  • Zlotnik, Sergio
  • Faccenna, Claudio
  • Vergés Masip, Jaume
Subduction trench curvature is generally attributed to the Earth's sphericity. Although, observed trench curvature in Nature are usually larger than those imposed by Earth radius. Other factors potentially influencing curvature are the mantle flow (produced by some other geodynamic process), internal heterogeneities in the subducting plate (e.g. variations in plate age and consequently in its thickness), the presence of crustal features (e.g. seamounts or plateaus), the orientation of the main plate structures (parallel/perpendicular to the trench) and the geometry of the upper plate. The role of a weak lithosphere on a lateral side perpendicular to the strike of the retreating subduction, e.g. continent/transfer zones, is unexplored. We study the influence of this boundary condition in a retreating subduction setting by varying its kinematic nature using analog modelling. A continental block is considered in one side of the plate, and the kinematic nature of the contact with the oceanic plate is varied considering: 1) fully attached, 2) half attached, and 3) completely free. To first order, lateral boundary perpendicular to the trench introduces an asymmetry in the trench curvature. The magnitude of this asymmetry is proportional to the resistance of the transfer zone. This kinematic resistance slows down the subduction of the oceanic plate near the contact and enhances the subduction in the free lateral side, thus affecting the retreat velocities along the trench. This work has implications for present and geologic past subduction zones where asymmetric trench and laterally varying retreat velocities have been observed/postulated. This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) contribution., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) contribution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A detailed crust to upper mantle structure: Comparison between Algerian and Alboran domains in the Western Mediterranean.

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We present a comparison of the present-day crust to upper-mantle (400km) structure in the Western Mediterranean along two NW-SE oriented transects in the Alboran and Algerian domains. The Alboran domain transect crosses the Betics, the Alboran Basin, and the northern margin of Africa between the Tell and Rif mountains. The Algerian domain transect crosses Valencia Trough, the Balearic Promontory, the Algerian basin and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, compositional, density and seismic velocity structure, also incorporating slabs imaged by seismic tomography using recently updated version of the LitMod2D, an integrated geophysical-petrological modelling tool. LitMod2D combines data from petrology, geochemistry and geophysics in a self-consistent thermodynamic framework. The resulting structure is constrained by simultaneously fitting elevation, gravity, geoid and surface heat flow to reduce the uncertainties in the modelling. Further, we calculate synthetic receiver functions and surface wave dispersion curves from our velocity model. We do this to circumvent non-uniqueness of seismic tomography models and directly compare the prediction from our velocity model with the observed seismological data. Preliminary results suggest that crust is thickest beneath the Betics and thins beneath the Alboran basin within a distance of ~100 km. Farther SE, crust gradually thickens beneath the north margin of Africa, between Tell and Rif mountains over ~300 km distance. The LAB shows a similar trend though affected by the presence of the slab underneath Betics. For the Algerian domain transect, maximum crustal thickness occurs beneath the Tell-Atlas Mountains with noticeable variations across the Algerian basin, Balearic Promontory and Valencia Trough, the LAB showing a similar tendency. Comparing the modelled geometries suggests that both transects have opposite trends with the deepest Moho and LAB in the NW side of the Alboran domain transect and in the SE side of the Algerian domain transect, imposing important constrains on the geodynamic evolution of the Western Mediterranean., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dependence of lithospheric slab buoyancy on composition and convergence rate: insights from a thermally-coupled kinematic model

  • Boonma, Kittiphon
  • Kumar, Ajay
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, The buoyancy of the lithospheric mantle relative to the asthenospheric mantle is the driving force of plate subduction and mantle delamination (the peeling off of the lithospheric mantle from the crust and its detachment and sinking into the asthenospheric mantle). Both mechanisms are often invoked for the evolution of collision zones, yet there are still open questions about the conditions under which they take place. The higher density of the lithosphere relative to the asthenosphere is thought to lead to subduction or delamination as it sinks. However, it is true only when the densities are temperature dependent. We adopt a mineral physics viewpoint where the density depends on temperature, pressure, and composition such that lithospheric mantle can be less dense than that of the underlying asthenosphere, posing a severe problem for the initiation of delamination. The density and its pressure-temperature dependence, in the lithosphere and asthenosphere, are calculated from stable mineral assemblages computed using major oxides composition based on mantle xenoliths/garnet peridotites in the (CFMAS) framework.We present a parametric study on the relationship between slab buoyancy and convergence rate using a simple 2D kinematic numerical model, incorporating thermal advection and diffusion. We consider different types of the lithospheric mantle (e.g. Archon, Tecton, Proton, and Oceanic), subducting with different convergence rate and constant angle, into the asthenosphere. Our results suggest that Oceanic, Tecton and Proton lithospheres are always negatively buoyant and maximum negative buoyancy increases with the convergence velocity whereas Archons are always positively buoyant. In case of oceanic lithosphere maximum negative buoyancy also increases with its age for a given velocity., This is a SUBITOP (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (CGL2014-59516) contribution.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Thermomechanical 2D model for a lithosphere transect of North Iberia: reconciling theories of its Cenozoic geodynamic evolution.

  • Valverde, Ángel
  • García-Castellanos, Daniel
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Moresi, L. N.
  • Farrington, R. J.
EGU General Assembly 2019, in Viena, Austria, 7–12 April 2019, We investigate the influence of the rheology of the lithosphere and inherited weak zones on the transmission of stresses in a N-S oriented transect for the Iberian Peninsula crossing the Central System, Duero Basin and the Cantabrian Range. The Iberian Peninsula was an independent microplate that has been deformed by the convergence between the Eurasian and African plates for the last 65 My. During this tectonic compression, the intraplate mountain range Central System uplifted. Previous studies suggest distinct ways of stress transmission in intraplate deformation such us lithosphere folding or mid-crustal detachment levels. The controversy comes on the distribution of the crustal shortenings in the different areas of the transect and how the crustal deformation accommodates according to those shortenings. Another enigma is the high overall elevation of the Iberian Peninsula compared to the mean topography of Europe. In this study, we perform some thermomechanical models varying rheologies and including weak parts inherited from the Variscan orogeny. We aim to explain the different shortenings, geostructural interpretation and lithosphere asthenosphere boundary from previous studies, by numerical modeling. The transect incorporates a 30 My old oceanic crust in the Bay of Biscay, a weak zone down into the upper mantle on the continental and oceanic transition part, and two faults with a different angle at both sides of the Central System which is a granitoid block. The adopted rheology consists of a power law creep, including diffusion and dislocation, in which viscosities decrease due to a plastic criterion that follows the Byerlee’s law. To simulate deformation, we use Underworld-II, a particle-in-cell finite element code applied to large-scale geodynamics simulations. Results show the importance of inherited weak zones to explain the grown of the Central system as a pop-up structure and for mid-lower crustal subduction below the Cantabrian Range. They show the relevance of a mid-detachment level transferring strain rate to the Central System. Our models present high mean absolute topography comparable to the actual Iberian relief in the transect of our study as a result of the density distribution applied., This work is part of the projects MITE (CGL2014-59516-P) and SUBITOP (H2020-MSCA-ITN-2015-674899). We also thank the Barcelona Supercomputing centre (BSC-CNS) for their support to projects AECT-2018-3-0008 & AECT-2018-1-0007
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of the crust and upper mantle structure of the Alboran and Algerian domains (Western Mediterranean): Tectonic significance

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Vergés Masip, Jaume
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
EGU General Assembly 2020 Online, 4-8 May 2020, We present a comparison of the present-day crust to upper-mantle structure in the Western Mediterranean along two NW-SE oriented geo-transects in the Alboran and Algerian basins. The Alboran domain geo-transect traverses the Iberian Massif, the Betics, the Alboran Basin and ends in the northern margin of Africa between the Tell and Rif mountains. The Algerian domain geo-transect traverses the Catalan Coast Ranges, the Valencia Trough, the Balearic Promontory, the Algerian basin, the Greater Kabylies and ends in the Tell-Atlas Mountains in the northern margin of Africa. We model the thermal, density (i.e. compositional) and seismic velocity structure by integrating geophysical and geochemical dataset in a self-consistent thermodynamic framework. The crustal structure is constrained by seismic experiments and geological cross-sections, whereas seismic tomography models and mantle xenoliths constrain the upper mantle structure and composition. The Algerian Basin lithosphere shows a typical oceanic lithosphere composition, whereas the Alboran Basin lithosphere is slightly fertile. The lithospheric mantle beneath the Betics and Greater Kabylies are also fertile compared to the Iberian and African lithospheres showing the involvement of the fertile sublithosphere mantle during the later stages of subduction. In the Valencia Trough, the lithosphere is fertile in comparison to the Balearic Promontory lithosphere, which is similar to Iberian lithosphere. A lithosphere-scale thickening is observed in the Betics, and the Greater Kabylies, and thinning follows towards the Alboran and Algerian back-arc basins. Detached slabs with anomalous temperature of-320 oC, with oceanic lithosphere composition beneath the Greater Kabylies, and Iberian lithosphere composition beneath the Betics, are required to fit the geoid height. Our results impose important constraints for the geodynamic evolution models of the Western Mediterranean., This work has been supported by SUBTETIS (PIE-201830E039) project, EU Marie Curie Initial Training Network `SUBITOP¿ (674899-SUBITOP-H2020-MSCA-ITN-2015), the Agencia Estatal de Investigación through projects MITE (CGL2014-59516) and GeoCAM (PGC2018-095154-B-100), and the Agency for Management of University and Research Grants of Catalonia (AGAUR-2017-SGR-847).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New crustal and lithospheric mantle structure of Alaska from geoid, elevation and thermal inversion analysis further constrained by 3D gravity modelling

  • Carballo, Alberto
  • Jadamec, Margarete
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2018, We investigate the lithospheric structure of Alaska and the lateral crustal density variations using a two-stepapproach. First, we calculate the crustal and mantle lithosphere thicknesses from joint geoid and elevationmodeling combined with thermal analysis further constrained by available seismic data. We then compute the 3Dgravity effect of the resulting lithospheric structure to separate the measured Bouguer anomaly into its regionaland local components. The thickest crust (> than 40 km) is observed in the Brooks Range, Wrangell Mountainsand the Alaska Range, while thinnest crust is located in the Aleutian Range and Chugach Mountains (< 30 km).In addition, moderate crustal thickness (in the range of 32 to 36 km, in average) is obtained underneath theYukon-Tanana basin, the Kuskokwim Mountains, Ahklum Mountains, the Yukon-Kuskokwim Coastal Lowlandand in eastern Alaska. The LAB depth map shows that the deepest LAB is located in the western Brooks Range (>180 km) while the shallowest (∼80 km) is observed along the continental side of the Yakutat Block. The obtainedresidual gravity anomalies highlight lateral average crustal density variations which we discus in terms of crustalstructure. Positive residual anomalies delineate the high density crustal rocks of the accreted Wrangellia andComposite terrains while negative values are associated with the sedimentary rocks of the Sadlerochit Mountains., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New improvements on LitMod package: A tool for integrated geophysical-petrological modelling of the lithosphere and upper mantle

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
European Geosciences Union General Assembly 2018 Vienna , Austria , 8–13 April 2018, LitMod is a combined geophysical-petrological 2D forward modelling tool developed ten years ago at ICTJACSIC to study the thermal, compositional, density and seismological structure of lithosphere and sublithosphere domains by combining data from petrology, mineral physics and geophysical observables within a self-consistent framework. Here, we present a set of improvements on the different modules of the current version of the LitMod package focused on the graphic user interface (GUI), the average composition of the upper mantle, and the incorporation of anomalous sublithospheric bodies in terms of composition, temperature and seismic velocities. A new GUI has been developed under Python programming language to gain versatility and compatibility with the different operative systems and platforms. We tested several changes in the sublithospheric mantle composition (DMM instead PUM) and in the attenuation parameters (grain size and period) to fit the calculated seismic velocities with those from the ak135 global reference model. None of these changes produce significant variations in the calculated velocity values below 200 km depth and hence, the calculated synthetic tomography from LitMod shows a red shift below this depth. The most interesting improvement is the possibility to incorporate sublithospheric bodies with different chemical compositions, and either anomalous velocities (Vp or Vs) or temperatures, which can be imposed from independent studies for each target region. To this end we increased the range of temperatures up to 2200 ºC in calculating the mineral assemblages and we incorporated anelasticity in calculating the bulk rock seismic velocities and their partial derivatives, such that we can translate temperature anomalies into seismic velocities and vice-versa. Additionally, this new tool permits to calculate coupled-uncoupled elevation to estimate the effects of density anomalies on topography giving an upper bound for dynamic topography under isostatic equilibrium., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).