Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots, Edge computing: influence of latencies on the precision of robots

  • Urbaniak, Dominik
  • Rosell, Jan
  • Suárez, Raúl
  • Suppa, Michael
[Resumen] La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., [Abstract] Edge computing allows access to large computational resources and computer networks, making it easier for small devices with limited resources to perform complex computations by downloading them to powerful computers on the edge, and allows latency in communications to be reduced compared to cloud computing. Autonomous mobile robots could greatly benefit from edge computing, as their energy and computational resources are generally limited but its use would allow them to perform computationally complex tasks that require rapid adaptations to a changing environment. In this work, a comparison of the impact of the most outstanding communication technologies is carried out using as a test task, in sumulation with Gazebo and ROS2, the correction of the orientation of a cube when being pushed by a robot manipulator UR5e equipped with a parallel-finger gripper Robotiq 2F-85. The results show a better performance of 5G Ultra Reliable Low-Latency Communication (URLLC) over private 5G and 4G communications, reducing the median orientation error by 36% and 55 %, respectively, after having carried out 50 runs of corrective actions of the orientation with each technology.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard|||0000-0002-6005-9608
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union's H2020 research and innovation program under the Marie Sklodowska-Curie grant ID 956670. J. Vidal's work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OBIOO, funded by MCIN/AEl/l0.13039/501100011033, and by FEDER-VE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Contextual bandits and reconfigurable intelligent surfaces for predictive LTM handover decisions

  • Moreno Locubiche, Ainna Yue|||0009-0006-4237-7131
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Muñoz Medina, Olga|||0000-0002-8739-7068
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
This article addresses the challenge of optimizing handover (HO) in next-generation wireless networks by integrating Reconfigurable Intelligent Surfaces (RIS), predicting received signal power, and utilizing learning-based decision-making. A conventional reactive HO mechanism, such as lower-layer triggered mobility (LTM), is enhanced through linear prediction to anticipate link degradation. Additionally, the use of RIS helps to mitigate signal blockage and extend coverage. An online trained non-linear Contextual Multi-Armed Bandit (CMAB) agent selects target gNBs based on context features, which reduces unnecessary HO and signaling overhead. Extensive simulations evaluate eight combinations of these techniques under realistic mobility and channel conditions. Results show that CMAB and RSRP prediction consistently reduce the number of HO, ping-pong rate and cell preparations, while RIS improves link reliability., This work was funded through the project 6-SENSES grant PID2022-138648OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by FEDER-UE, ERDF-EU A way of making Europe, grant 22CO1/008248, and by the project 5GSmartFact, funded by the European Union’s H2020 research and innovation program under the MSCA grant ID 956670., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Edge computing in autonomous and collaborative assembly lines

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Industry 4.0 demands interconnected production lines that consist of modular assets. Recent advances of wireless communication technologies allow a large connectivity of devices and approach the performance of wireline communication, specifically regarding throughput, latency and reliability. As a result, more and more time critical connections can be performed wirelessly. Both attributes foster the emergence of edge computing, a concept that can efficiently utilize distributed computational resources. This is particularly beneficial for modular assets that have limited energy supply and capacity of computation hardware. Autonomous mobile robots offer high potential for object transportation, inspection and manipulation in shared workspaces with human operators. With edge computing, heavy computations can then be offloaded to more powerful computers or edge data centers to speed up the decision-making process and increase the productivity. For an efficient orchestration strategy of computation and communication resources, various task requirements in terms of latency, bandwidth, cost and energy must be considered. To this end, we aim at evaluating the requirements in autonomous and collaborative assembly lines, a use case that comprises diverse tasks including latency-sensitive ones in dynamic, uncertain, multi-agent environments. This work focuses on discussing latency requirements on the basis of a collaborative safety mode and autonomous robotic insertion., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José
The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union's H2020 research and innovation program under the Marie Sklodowska-Curie grant ID 956670. J. Vidal's work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OBIOO, funded by MCIN/AEl/l0.13039/501100011033, and by FEDER-VE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Edge computing in autonomous and collaborative assembly lines

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Industry 4.0 demands interconnected production lines that consist of modular assets. Recent advances of wireless communication technologies allow a large connectivity of devices and approach the performance of wireline communication, specifically regarding throughput, latency and reliability. As a result, more and more time critical connections can be performed wirelessly. Both attributes foster the emergence of edge computing, a concept that can efficiently utilize distributed computational resources. This is particularly beneficial for modular assets that have limited energy supply and capacity of computation hardware. Autonomous mobile robots offer high potential for object transportation, inspection and manipulation in shared workspaces with human operators. With edge computing, heavy computations can then be offloaded to more powerful computers or edge data centers to speed up the decision-making process and increase the productivity. For an efficient orchestration strategy of computation and communication resources, various task requirements in terms of latency, bandwidth, cost and energy must be considered. To this end, we aim at evaluating the requirements in autonomous and collaborative assembly lines, a use case that comprises diverse tasks including latency-sensitive ones in dynamic, uncertain, multi-agent environments. This work focuses on discussing latency requirements on the basis of a collaborative safety mode and autonomous robotic insertion., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed, Postprint (published version)