Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots, Edge computing: influence of latencies on the precision of robots

  • Urbaniak, Dominik
  • Rosell, Jan
  • Suárez, Raúl
  • Suppa, Michael
[Resumen] La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., [Abstract] Edge computing allows access to large computational resources and computer networks, making it easier for small devices with limited resources to perform complex computations by downloading them to powerful computers on the edge, and allows latency in communications to be reduced compared to cloud computing. Autonomous mobile robots could greatly benefit from edge computing, as their energy and computational resources are generally limited but its use would allow them to perform computationally complex tasks that require rapid adaptations to a changing environment. In this work, a comparison of the impact of the most outstanding communication technologies is carried out using as a test task, in sumulation with Gazebo and ROS2, the correction of the orientation of a cube when being pushed by a robot manipulator UR5e equipped with a parallel-finger gripper Robotiq 2F-85. The results show a better performance of 5G Ultra Reliable Low-Latency Communication (URLLC) over private 5G and 4G communications, reducing the median orientation error by 36% and 55 %, respectively, after having carried out 50 runs of corrective actions of the orientation with each technology.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-cost 3D indoor visible light positioning: algorithms and experimental validation, Localització en 3D de baix cost basada en llum: algorismes i validació experimental

  • Khan, Sanjha
  • Paradells Aspas, Josep|||0000-0003-4185-2202
  • Catalán, Marisa
Visible light technology presents significant advancement for indoor IoT applications. These systems offer enhanced bit rate transmission, enabling faster and reliable data transfer. Moreover, optical-based visible light systems facilitate improved location services within indoor environments. However, many of these systems still exhibit limited accuracy within several centimeters, even when relying on costly high-resolution cameras. This paper introduces a novel low-cost visible light system for 3D positioning, designed to enhance indoor positioning accuracy using low-resolution images. Initially, we propose a non-integer pixel (NI-P) algorithm to enhance precision without the need for higher-resolution images. This algorithm allows the system to identify the precise light spot coordinates on the low-resolution images, enabling accurate positioning. Subsequently, we present an algorithm leveraging the precise coordinate data from the previous step to determine the 3D position of objects even in front of errors in the measures. Benefiting from high accuracy, reduced cost, and low complexity, the proposed system is suitable for implementation on low-end hardware platforms, thereby increasing the versatility and feasibility of visible light technologies in indoor settings. Experimental results show an average 2D positioning error of 1.08 cm and 3D error within 1.4 cm at 2.3 m separation between the object and camera, achieved with an average positioning time of 20 ms on a low-end embedded device. Consequently, the proposed system offers fast and highly accurate indoor positioning and tracking capabilities, making it suitable for applications like mobile robots, automated guided vehicles, and indoor parking management. Furthermore, it is easy to deploy and does not require re-calibration., This research was partially funded by the European Union’s Horizon 2020 5GSmartFact project under the Marie Skłodowska-Curie grant agreement ID 956670, by CDTI and the European Union NextGenerationEU/PRTR within the call Ayudas Cervera para Centros Tecnológicos 2023 under grant 6G-DIFERENTE (CER-20231018) and by the Spanish MCIN/AEI/10.13039/501100011033 through project PID 2019-106808RA-100., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Deep learning-based UWB-IMU data fusion for indoor positioning in industrial scenario

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
  • Catalán Cid, Marisa
  • Paradells Aspas, Josep|||0000-0003-4185-2202
Accurate and precise wireless infrastructure-based positioning systems become crucial as industries move towards flexible, portable, and autonomous transportation systems such as Automated Guided Vehicles (AGVs). Multipath-dominant dynamic environments like industries present significant challenges for wireless signal propagation and affect wireless positioning accuracy due to the interplay of reflected signals from obstacles. The achievable indoor positioning accuracy of the target AGV can be enhanced by fusing the measurements from the wireless infrastructure with the target's onboard sensor data. Nevertheless, the lack of correspondence between the wireless infrastructure and the target's onboard sensors causes the measurements from these two systems to arrive at irregular time steps. Using asynchronous measurements in the data fusion process can degrade the overall positioning accuracy of the target AGV. This paper proposes a novel deep learning-based data fusion approach to deal with asynchronous measurements from the wireless infrastructure Ultra-Wideband (UWB) and the target's onboard Inertial Measurement Unit (IMU) sensor to achieve enhanced positioning accuracy of the target AGV. In particular, a two-stage cascaded Deep Neural Network (DNN) is proposed to deal with the asynchronized measurements from UWB and IMU sensors. The first stage of the DNN is used to obtain the initial position estimate of the AGV by processing the measurements from UWB. Subsequently, the second stage of the DNN fuses the initial position estimate of the AGV with the IMU sensor data to obtain the final enhanced position estimate. The proposed approach is validated with real-world experiments in an indoor industrial scenario using UWB technology in channel 2 (3.7-4.2 GHz) and an IMU sensor placed on an AGV. Moreover, the achievable positioning accuracy and the computational runtime to provide the position estimates with the proposed approach are analyzed. The experimental results show that the proposed approach achieves a mean absolute error of less than 10 cm, outperforming the considered baseline methods, Extended Kalman Filter (EKF) and Long Short-Term Memory (LSTM)., The work of Josep Paradells was supported in part by the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through Project PID2023-146378NB-I00 and in part by the Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2021 SGR 00330. This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant 956670, in part by Project 6-SENSES under Grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033, and in part by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard|||0000-0002-6005-9608
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Localization-driven multi-robot exploration for indoor search and rescue

  • Maresca, Fabio
  • Devoti, Francesco
  • Encinas Lago, Guillermo
  • Sciancalepore, Vincenzo
  • Paradells Aspas, Josep|||0000-0003-4185-2202
  • Costa Pérez, Xavier
This work was supported in part by the European Union’s Horizon Europe Research and Innovation Programme (MultiX) under Grant 101192521; in part by EU FP for Research and Innovation Horizon 2020 (5GSmartFact) under Grant 956670; in part by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union—NextGeneration EU (Call UNICO I+D 5G 2021) under Grant TSI-063000-2021-6 and Grant TSI-063000-2021-14; and in part by the CERCA Programme from the Generalitat de Catalunya., Search and Rescue (SAR) operations in complex indoor environments require efficient robotic coordination to ensure timely victim detection while optimizing area coverage and operation time. However, relying solely on exploration may be insufficient, as early victim localization can enhance path planning and prioritize victim access over the exploration of empty areas. In this work, we integrate Radio Frequency (RF)-based victim localization into State-of-Art multi-robot exploration approaches to guide decision-making and prioritize areas with higher likelihood of victim presence. Specifically, we perform probabilistic victim localization using Angle of Arrival (AoA) triangulation of RF signals, enhanced by Received Signal Strength Indicator (RSSI) filtering. This information is then used to dynamically update exploration priorities and replan robot paths toward potential victim locations. We evaluate the proposed method using the Cramér-Rao Lower Bound (CRLB) and Root Mean Square Error (RMSE). Extensive simulations confirm that the proposed approach significantly increases SAR efficiency, allowing up to ~34% of victims to be reached earlier in typical indoor environments and reducing the total mission time by up to 50%., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Slicing for dense smart factory network: current state, scenarios, challenges and expectation

  • Ochonu, Regina
Submitted to IEEE ETFA 2024 - IEEE International Conference on Emerging Technologies and Factory Automation, 8 Pages, In the era of Industry 4.0, smart factories have emerged as a paradigm shift, redefining manufacturing with the integration of advanced digital technologies. Central to this transformation is the deployment of 5G networks, offering unprecedented levels of connectivity, speed, reliability, and ultra-low latency. Among the revolutionary features of 5G is network slicing, a technology that offers enhanced capabilities through the customization of network resources by allowing multiple logical networks (or slices) to run on top of a shared physical infrastructure. This capability is particularly crucial in the densely packed and highly dynamic environment of smart factories, where diverse applications - from robotic automation to real-time analytics - demand varying network requirements. In this paper, we present a comprehensive overview of the integration of slicing in smart factory networks, emphasizing its critical role in enhancing operational efficiency and supporting the diverse requirements of future manufacturing processes. We elaborate on the recent advances, and technical scenarios, including indoor factory propagation conditions, traffic characteristics, system requirements, slice-aware radio resource management, network elements, enabling technologies and current standardisation efforts. Additionally, we identify open research challenges as well as key technical issues stifling deployments. Finally, we speculate on the future trajectory of slicing-enabled smart factories, emphasizing the need for continuous adaptation to emerging technologies., This work is supported by the 5GSmartFact project, which has received funding from the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant ID 956670. Also by the project 6-SENSES grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by FEDER-UE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
R. Ochonu and J. Vidal,, The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant ID 956670. J. Vidal’s work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI- 063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OB- I00, funded by MCIN/AEI/10.13039/501100011033, and by FEDER-UE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard|||0000-0002-6005-9608
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

PosGNN: A graph neural network based multimodal data fusion for indoor positioning in industrial Non-Line-of-Sight scenarios

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Abode, Daniel
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
In industrial environments, the wireless infrastructure is functional for offering services such as communication and positioning of industrial assets. However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in industrial scenarios cause the wireless receiver to have positional information from a limited and varying number of wireless transmitters between consecutive time steps, leading to ambiguities in wireless infrastructure-based positioning. In this paper, we propose PosGNN, a novel data fusion solution based on the Graph Neural Network (GNN) approach that allows us to estimate the position of the User Equipment (UE) by fusing the positional information from the available wireless transmitters at each time step with the UE sensor technology. The performance of the proposed method is assessed using an experimental setup of Ultra-Wideband (UWB) technology as wireless infrastructure at 3.7-4.2GHz frequency band, the Inertial Measurement Unit (IMU) as UE-side sensor, and the Automated Guided Vehicle (AGV) as the target UE to be positioned. The experimental results demonstrate the exceptional performance of our approach over the conventional model-based approach, Extended Kalman Filter (EKF), and the data-driven approach, Deep Neural Network (DNN), achieving an average positioning error of less than 15cm in harsh industrial environments., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant Agreement 956670 and in part by MCIN/AEI/ 10.13039/501100011033 and ERDF A way of making Europe as part of Project 6-SENSES under Grant PID2022-138648OB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik|||0000-0002-8827-2013
  • Artemenko, Alexander
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Nájar Martón, Montserrat|||0000-0003-3507-5689
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union's H2020 research and innovation program under the Marie Sklodowska-Curie grant ID 956670. J. Vidal's work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OBIOO, funded by MCIN/AEl/l0.13039/501100011033, and by FEDER-VE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Deliverable D4.2 Description and preliminary evaluation of applications

  • Singh, Suhani
  • Suppa, Michael
  • Urbaniak, Dominik
  • Pathan, Sanjha Khan|||0000-0001-9376-3514
  • Karfakis, Panagiotis
  • Muthineni, Karthik|||0000-0002-8827-2013
This deliverable details the progress of work regarding robotic applications. Five ESRs have been working in the domain with focus on indoor localisation, simultaneous localisation and mapping for in- and outdoor applications, environment model generation and manipulation. The technology developments consider robotic applications in the context of wireless communication such as 5G. 5G and edge computing provide novel access to mobile and stationary robot applications. The current results are detailed and further research directions are discussed., 5GSmartFact has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement ID 956670
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Contextual bandits and reconfigurable intelligent surfaces for predictive LTM handover decisions

  • Moreno Locubiche, Ainna Yue|||0009-0006-4237-7131
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Muñoz Medina, Olga|||0000-0002-8739-7068
  • Cabrera-Bean, Margarita|||0000-0001-9058-3825
This article addresses the challenge of optimizing handover (HO) in next-generation wireless networks by integrating Reconfigurable Intelligent Surfaces (RIS), predicting received signal power, and utilizing learning-based decision-making. A conventional reactive HO mechanism, such as lower-layer triggered mobility (LTM), is enhanced through linear prediction to anticipate link degradation. Additionally, the use of RIS helps to mitigate signal blockage and extend coverage. An online trained non-linear Contextual Multi-Armed Bandit (CMAB) agent selects target gNBs based on context features, which reduces unnecessary HO and signaling overhead. Extensive simulations evaluate eight combinations of these techniques under realistic mobility and channel conditions. Results show that CMAB and RSRP prediction consistently reduce the number of HO, ping-pong rate and cell preparations, while RIS improves link reliability., This work was funded through the project 6-SENSES grant PID2022-138648OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by FEDER-UE, ERDF-EU A way of making Europe, grant 22CO1/008248, and by the project 5GSmartFact, funded by the European Union’s H2020 research and innovation program under the MSCA grant ID 956670., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Deliverable number D3.1: State of the art on 5G industrial networks and slicing for IIoT

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Maresca, Fabio
  • Kumar, Suneel
  • Khosroshahi, Keivan
  • Yusuf, Taofeek
R. Ochonu (UPC-ESR2), F. Maresca (NEC-ESR10), S. Kumar (i2CAT-ESR3), K. Khosroshahi (CNRS-ESR8), T.A.O. Yusuf (NEC-ESR11), Deliverable number D3.1: State of the art on 5G industrial networks and slicing for IIoT, March 2023. Available: https://5gsmartfact.upc.edu/results/deliverables., In this deliverable, ESR2 discussed end-2-end network slicing for dense networks with mMTC, eMBB and URLLC requirements for Industrial Internet-of-Things (IIoT). The architecture and enabling technologies of network slicing and network slice management are presented as well as the system requirements for some smart factory use cases. A survey of the recent research work in this area is also carried out and the open research challenges are highlighted. Some AI techniques that enable the development of dynamic slice aware resource allocation and slice admission control schemes were briefly mentioned. Finally, the overall scope of the PhD research and the research directions are discussed.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Uplink and downlink slice-aware OFDMA resource allocation for smart factory networks

  • Ochonu, Regina
  • Vidal Manzano, José|||0000-0002-1985-2065
  • Bhatia, Gurjot Singh
  • Corre, Yoann
Smart factories require wireless networks capable of supporting diverse applications with stringent and heterogeneous quality of service (QoS) demands. Network slicing enables this by virtualizing resources into isolated slices optimized for specific service types. To effectively manage scarce radio resources and ensure seamless support for mixed-traffic industrial users, this paper proposes a suite of slice-aware resource allocation (RA) frameworks encompassing power and subchannel (SC) allocation for both uplink (UL) and downlink (DL) in industrial time-division duplexing (TDD)-orthogonal frequency division multiple access (OFDMA) networks. We transform diverse QoS constraints—latency, reliability, jitter, and throughput—into unified rate expressions enabling tractable convex optimization across three slice types: capacity limited (CL) for best-effort traffic, ultra-reliable low-latency communication (URLLC) for mission-critical control, and time sensitive (TS) for deterministic periodic traffic. The framework incorporates dynamic TDD adaptation for asymmetric traffic patterns and admission control to manage congestion. The effectiveness of the proposed algorithms in reducing energy consumption while guaranteeing slice-specific QoS is validated using realistic industrial ray-tracing channels and extensive simulations., This work was supported in part by the 5GSmartFact Project funded by European Union’s H2020 Research and Innovation Program through the Marie Skłodowska-Curie under Grant 956670 and in part by the Project 6-SENSES funded by MCIN/AEI/10.13039/501100011033 under Grant PID2022-138648OB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Edge computing in autonomous and collaborative assembly lines

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan|||0000-0003-4854-2370
  • Suárez Feijóo, Raúl|||0000-0002-3853-7095
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Industry 4.0 demands interconnected production lines that consist of modular assets. Recent advances of wireless communication technologies allow a large connectivity of devices and approach the performance of wireline communication, specifically regarding throughput, latency and reliability. As a result, more and more time critical connections can be performed wirelessly. Both attributes foster the emergence of edge computing, a concept that can efficiently utilize distributed computational resources. This is particularly beneficial for modular assets that have limited energy supply and capacity of computation hardware. Autonomous mobile robots offer high potential for object transportation, inspection and manipulation in shared workspaces with human operators. With edge computing, heavy computations can then be offloaded to more powerful computers or edge data centers to speed up the decision-making process and increase the productivity. For an efficient orchestration strategy of computation and communication resources, various task requirements in terms of latency, bandwidth, cost and energy must be considered. To this end, we aim at evaluating the requirements in autonomous and collaborative assembly lines, a use case that comprises diverse tasks including latency-sensitive ones in dynamic, uncertain, multi-agent environments. This work focuses on discussing latency requirements on the basis of a collaborative safety mode and autonomous robotic insertion., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Deliverable number D3.2: Solutions and preliminary evaluation of the industrial slicing mechanism

  • Maresca, Fabio
  • Yusuf, Taofeek
  • Mursia, Placido
  • Sciancalepore, Vincenzo
  • Ochonu, Regina
  • Kumar, Suneel
  • Khosroshahi, Keivan
R. Ochonu (UPC-ESR2), F. Maresca (NEC-ESR10), S. Kumar (i2CAT-ESR3), K. Khosroshahi (CNRS-ESR8), T.A.O. Yusuf (NEC-ESR11), Deliverable number D3.2: Solutions and preliminary evaluation of the industrial slicing mechanisms, June 2024. Available: https://5gsmartfact.upc.edu/results/deliverables., 5G networks are poised to revolutionize a wide array of industries by providing faster speeds, lower latency, and more reliable connectivity compared to previous generations. In particular, the 5GSmartFact project focuses on the application of 5G to IIoT. While the first deliverable of this WP, i.e., D3.1, focused on documenting state-of-the-art 5G industrial networks and slicing mechanisms for the IIoT, in this deliverable D3.2 we identify candidate technologies, namely ISAC, RISs, Simultaneous Localization and Mapping (SLAM), recent advances in Wireless Fidelity (WiFi) 7, and network slicing as pivotal areas that are poised to radically enhance 5G industrial networks.
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Slicing for dense smart factory network: current state, scenarios, challenges and expectation

  • Ochonu, Regina
Submitted to IEEE ETFA 2024 - IEEE International Conference on Emerging Technologies and Factory Automation, 8 Pages, In the era of Industry 4.0, smart factories have emerged as a paradigm shift, redefining manufacturing with the integration of advanced digital technologies. Central to this transformation is the deployment of 5G networks, offering unprecedented levels of connectivity, speed, reliability, and ultra-low latency. Among the revolutionary features of 5G is network slicing, a technology that offers enhanced capabilities through the customization of network resources by allowing multiple logical networks (or slices) to run on top of a shared physical infrastructure. This capability is particularly crucial in the densely packed and highly dynamic environment of smart factories, where diverse applications - from robotic automation to real-time analytics - demand varying network requirements. In this paper, we present a comprehensive overview of the integration of slicing in smart factory networks, emphasizing its critical role in enhancing operational efficiency and supporting the diverse requirements of future manufacturing processes. We elaborate on the recent advances, and technical scenarios, including indoor factory propagation conditions, traffic characteristics, system requirements, slice-aware radio resource management, network elements, enabling technologies and current standardisation efforts. Additionally, we identify open research challenges as well as key technical issues stifling deployments. Finally, we speculate on the future trajectory of slicing-enabled smart factories, emphasizing the need for continuous adaptation to emerging technologies., This work is supported by the 5GSmartFact project, which has received funding from the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant ID 956670. Also by the project 6-SENSES grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by FEDER-UE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Deliverable number D3.2: Solutions and preliminary evaluation of the industrial slicing mechanism

  • Maresca, Fabio
  • Yusuf, Taofeek
  • Mursia, Placido
  • Sciancalepore, Vincenzo
  • Ochonu, Regina
  • Kumar, Suneel
  • Khosroshahi, Keivan
R. Ochonu (UPC-ESR2), F. Maresca (NEC-ESR10), S. Kumar (i2CAT-ESR3), K. Khosroshahi (CNRS-ESR8), T.A.O. Yusuf (NEC-ESR11), Deliverable number D3.2: Solutions and preliminary evaluation of the industrial slicing mechanisms, June 2024. Available: https://5gsmartfact.upc.edu/results/deliverables., 5G networks are poised to revolutionize a wide array of industries by providing faster speeds, lower latency, and more reliable connectivity compared to previous generations. In particular, the 5GSmartFact project focuses on the application of 5G to IIoT. While the first deliverable of this WP, i.e., D3.1, focused on documenting state-of-the-art 5G industrial networks and slicing mechanisms for the IIoT, in this deliverable D3.2 we identify candidate technologies, namely ISAC, RISs, Simultaneous Localization and Mapping (SLAM), recent advances in Wireless Fidelity (WiFi) 7, and network slicing as pivotal areas that are poised to radically enhance 5G industrial networks., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Deliverable D4.2 Description and preliminary evaluation of applications

  • Singh, Suhani
  • Suppa, Michael
  • Urbaniak, Dominik
  • Pathan, Sanjha Khan
  • Karfakis, Panagiotis
  • Muthineni, Karthik
This deliverable details the progress of work regarding robotic applications. Five ESRs have been working in the domain with focus on indoor localisation, simultaneous localisation and mapping for in- and outdoor applications, environment model generation and manipulation. The technology developments consider robotic applications in the context of wireless communication such as 5G. 5G and edge computing provide novel access to mobile and stationary robot applications. The current results are detailed and further research directions are discussed., 5GSmartFact has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement ID 956670, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Deep learning-based data fusion of 6G sensing and inertial information for target positioning: experimental validation

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Grudnitsky, Artjom
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The sixth-generation (6G) cellular technology will be deployed with a key feature of Integrated Sensing and Communication (ISAC), allowing the cellular network to map the environment through radar sensing on top of providing communication services. In this regard, the entire network can be considered as a sensor with a broader Field of View (FoV) of the environment, assisting in both the positioning of active and detection of passive targets. On the other hand, the non-3GPP sensors available on the target can provide additional information specific to the target that can be beneficially combined with ISAC sensing information to enhance the overall achievable positioning accuracy. In this paper, we first study the performance of the ISAC system in terms of its achievable accuracy in positioning the mobile target in an indoor scenario. Second, we study the performance gain achieved in the ISAC positioning accuracy after fusing the information from the target's non-3GPP sensors. To this end, we propose a novel data fusion solution based on the deep learning framework to fuse the information from ISAC and non-3GPP sensors. We validate our proposed data fusion and positioning solution with a real-world ISAC Proof-of-Concept (PoC) as the wireless infrastructure, an Automated Guided Vehicle (AGV) as the target, and the Inertial Measurement Unit (IMU) sensor on the target as the non-3GPP sensor. The experimental results show that our proposed solution achieves an average positioning error of 3 cm, outperforming the considered baselines., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, part of this work has been supported by the German Federal Ministry of Education and Research (Foerderkennzeichen 16KISK116, KOMSENS-6G). In addition, this work is also part of the project ROUTE56 with grant PID2019-104945GBI00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Uplink and downlink slice-aware OFDMA resource allocation for smart factory networks

  • Ochonu, Regina
  • Vidal Manzano, José
  • Bhatia, Gurjot Singh
  • Corre, Yoann
Smart factories require wireless networks capable of supporting diverse applications with stringent and heterogeneous quality of service (QoS) demands. Network slicing enables this by virtualizing resources into isolated slices optimized for specific service types. To effectively manage scarce radio resources and ensure seamless support for mixed-traffic industrial users, this paper proposes a suite of slice-aware resource allocation (RA) frameworks encompassing power and subchannel (SC) allocation for both uplink (UL) and downlink (DL) in industrial time-division duplexing (TDD)-orthogonal frequency division multiple access (OFDMA) networks. We transform diverse QoS constraints—latency, reliability, jitter, and throughput—into unified rate expressions enabling tractable convex optimization across three slice types: capacity limited (CL) for best-effort traffic, ultra-reliable low-latency communication (URLLC) for mission-critical control, and time sensitive (TS) for deterministic periodic traffic. The framework incorporates dynamic TDD adaptation for asymmetric traffic patterns and admission control to manage congestion. The effectiveness of the proposed algorithms in reducing energy consumption while guaranteeing slice-specific QoS is validated using realistic industrial ray-tracing channels and extensive simulations., This work was supported in part by the 5GSmartFact Project funded by European Union’s H2020 Research and Innovation Program through the Marie Skłodowska-Curie under Grant 956670 and in part by the Project 6-SENSES funded by MCIN/AEI/10.13039/501100011033 under Grant PID2022-138648OB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José
The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union's H2020 research and innovation program under the Marie Sklodowska-Curie grant ID 956670. J. Vidal's work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OBIOO, funded by MCIN/AEl/l0.13039/501100011033, and by FEDER-VE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Edge computing in autonomous and collaborative assembly lines

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Industry 4.0 demands interconnected production lines that consist of modular assets. Recent advances of wireless communication technologies allow a large connectivity of devices and approach the performance of wireline communication, specifically regarding throughput, latency and reliability. As a result, more and more time critical connections can be performed wirelessly. Both attributes foster the emergence of edge computing, a concept that can efficiently utilize distributed computational resources. This is particularly beneficial for modular assets that have limited energy supply and capacity of computation hardware. Autonomous mobile robots offer high potential for object transportation, inspection and manipulation in shared workspaces with human operators. With edge computing, heavy computations can then be offloaded to more powerful computers or edge data centers to speed up the decision-making process and increase the productivity. For an efficient orchestration strategy of computation and communication resources, various task requirements in terms of latency, bandwidth, cost and energy must be considered. To this end, we aim at evaluating the requirements in autonomous and collaborative assembly lines, a use case that comprises diverse tasks including latency-sensitive ones in dynamic, uncertain, multi-agent environments. This work focuses on discussing latency requirements on the basis of a collaborative safety mode and autonomous robotic insertion., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PosGNN: A graph neural network based multimodal data fusion for indoor positioning in industrial Non-Line-of-Sight scenarios

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Abode, Daniel
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
In industrial environments, the wireless infrastructure is functional for offering services such as communication and positioning of industrial assets. However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in industrial scenarios cause the wireless receiver to have positional information from a limited and varying number of wireless transmitters between consecutive time steps, leading to ambiguities in wireless infrastructure-based positioning. In this paper, we propose PosGNN, a novel data fusion solution based on the Graph Neural Network (GNN) approach that allows us to estimate the position of the User Equipment (UE) by fusing the positional information from the available wireless transmitters at each time step with the UE sensor technology. The performance of the proposed method is assessed using an experimental setup of Ultra-Wideband (UWB) technology as wireless infrastructure at 3.7-4.2GHz frequency band, the Inertial Measurement Unit (IMU) as UE-side sensor, and the Automated Guided Vehicle (AGV) as the target UE to be positioned. The experimental results demonstrate the exceptional performance of our approach over the conventional model-based approach, Extended Kalman Filter (EKF), and the data-driven approach, Deep Neural Network (DNN), achieving an average positioning error of less than 15cm in harsh industrial environments., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant Agreement 956670 and in part by MCIN/AEI/ 10.13039/501100011033 and ERDF A way of making Europe as part of Project 6-SENSES under Grant PID2022-138648OB-I00., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Slice-aware resource allocation and admission control for smart factory wireless networks

  • Ochonu, Regina
  • Vidal Manzano, José
R. Ochonu and J. Vidal,, The 5th generation (5G) and beyond network offers substantial promise as the ideal wireless technology to replace the existing inflexible wired connections in traditional factories of today. 5G network slicing allows for tailored allocation of resources to different network services, each with unique Quality of Service (QoS) requirements. This paper presents a novel solution for slice-aware radio resource allocation based on a convex optimisation and control framework for applications in smart factory wireless networks. The proposed framework dynamically allocates minimum power and sub-channels to downlink mixed service type industrial users categorised into three slices: Capacity Limited (CL), Ultra Reliable Low Latency Communication (URLLC), and Time Sensitive (TS) slices. Given that the base station (BS) has limited transmission power, we enforce admission control by effectively relaxing the target rate constraints for current connections in the CL slice. This rate readjustment occurs whenever power consumption exceeds manageable levels. Simulation results show that our approach minimises power, allocates sub-channels to users, maintains slice isolation, and delivers QoS-specific communications to users in all the slices despite time-varying number of users and changing network conditions., R. Ochonu is supported by the 5GSmartFact project, which has received funding from the European Union’s H2020 research and innovation program under the Marie Skłodowska-Curie grant ID 956670. J. Vidal’s work is funded by the European Commission Horizon Europe SNS JU PREDICT-6G (GA 101095890) Project and the NextGeneration UNICO5G TIMING (TSI- 063000-2021-145). Also by the project 6-SENSES grant PID2022-138648OB- I00, funded by MCIN/AEI/10.13039/501100011033, and by FEDER-UE, ERDF-EU A way of making Europe, and the grants 22CO1/008248 and 2021 SGR 01033 (AGAUR, Generalitat de Catalunya)., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A survey of 5G-based positioning for industry 4.0: state of the art and enhanced techniques

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The fifth generation (5G) mobile communication technology integrates communication, positioning, and mapping functionalities as an in-built feature. This has drawn significant attention from industries owing to the capability of replacing the traditional wireless technologies used in industries with 5G infrastructure that can be used for both connectivity and positioning. To this end, we identify the Automated Guided Vehicle (AGV) as a primary use case to benefit from the 5G functionalities. Given that there have been various works focusing on 5G positioning, it is necessary to analyze the existing works about their applicability with AGVs in industrial environments and provide insights to future research. In this paper, we present state of the art in 5G-based positioning, with a focus on key features, such as Millimeter Wave (mmWave) system, Massive Multiple Input Multiple Output (MIMO), Ultra-Dense Network (UDN), Device-to-Device (D2D) communication, and Reconfigurable Intelligent Surface (RIS). Moreover, we present the shortcomings in the current state of the art. Additionally, we propose enhanced techniques that can complement the accuracy of 5G-based positioning in controlled industrial environments., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, partially funded through the project ROUTE56 (funded by the Agencia Estatal de Investigacion, PID2019-104945GB- I00 / AEI / 10.13039/501100011033)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Deep learning-based UWB-IMU data fusion for indoor positioning in industrial scenario

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
  • Catalán Cid, Marisa
  • Paradells Aspas, Josep
Accurate and precise wireless infrastructure-based positioning systems become crucial as industries move towards flexible, portable, and autonomous transportation systems such as Automated Guided Vehicles (AGVs). Multipath-dominant dynamic environments like industries present significant challenges for wireless signal propagation and affect wireless positioning accuracy due to the interplay of reflected signals from obstacles. The achievable indoor positioning accuracy of the target AGV can be enhanced by fusing the measurements from the wireless infrastructure with the target's onboard sensor data. Nevertheless, the lack of correspondence between the wireless infrastructure and the target's onboard sensors causes the measurements from these two systems to arrive at irregular time steps. Using asynchronous measurements in the data fusion process can degrade the overall positioning accuracy of the target AGV. This paper proposes a novel deep learning-based data fusion approach to deal with asynchronous measurements from the wireless infrastructure Ultra-Wideband (UWB) and the target's onboard Inertial Measurement Unit (IMU) sensor to achieve enhanced positioning accuracy of the target AGV. In particular, a two-stage cascaded Deep Neural Network (DNN) is proposed to deal with the asynchronized measurements from UWB and IMU sensors. The first stage of the DNN is used to obtain the initial position estimate of the AGV by processing the measurements from UWB. Subsequently, the second stage of the DNN fuses the initial position estimate of the AGV with the IMU sensor data to obtain the final enhanced position estimate. The proposed approach is validated with real-world experiments in an indoor industrial scenario using UWB technology in channel 2 (3.7-4.2 GHz) and an IMU sensor placed on an AGV. Moreover, the achievable positioning accuracy and the computational runtime to provide the position estimates with the proposed approach are analyzed. The experimental results show that the proposed approach achieves a mean absolute error of less than 10 cm, outperforming the considered baseline methods, Extended Kalman Filter (EKF) and Long Short-Term Memory (LSTM)., The work of Josep Paradells was supported in part by the Spanish MCIU/AEI/10.13039/501100011033/FEDER/UE through Project PID2023-146378NB-I00 and in part by the Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2021 SGR 00330. This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Sklodowska-Curie under Grant 956670, in part by Project 6-SENSES under Grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033, and in part by ERDF A way of making Europe., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Outlier rejection for 5G-based indoor positioning in ray-tracing-enabled industrial scenario

  • Muthineni, Karthik
  • Artemenko, Alexander
  • Vidal Manzano, José
  • Nájar Martón, Montserrat
The precise and accurate indoor positioning using cellular communication technology remains to be a prerequisite for several industrial applications, including the emergence of a new topic of Integrated Sensing and Communication (ISAC). However, the frequently occurring Non-Line-of-Sight (NLoS) conditions in a heavy multipath dominant industrial scenario challenge the wireless signal propagation, leading to abnormal estimation errors (outliers) in the signal measurements taken at the receiver. In this paper, we investigate the iterative positioning scheme that is robust to the outliers in the Time of Arrival (ToA) measurements. The Iteratively Reweighted Least Squares (IRLS) positioning scheme formulated on the Least Squares (LS) is implemented to reject the outlier measurements and reweight the available ToA samples based on their confidence. Our positioning scheme is validated under 5G frequency bands, including the C-band (3.7 GHz) and the mmWave-band (26.8 GHz) in a Ray-Tracing enabled industrial scenario with different emulation setups., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ID 956670. Also, this work is part of the project ROUTE56 with grant PID2019-104945GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and the project 6-SENSES with grant PID2022-138648OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Deliverable number D3.1: State of the art on 5G industrial networks and slicing for IIoT

  • Ochonu, Regina
  • Vidal Manzano, José
  • Maresca, Fabio
  • Kumar, Suneel
  • Khosroshahi, Keivan
  • Yusuf, Taofeek
R. Ochonu (UPC-ESR2), F. Maresca (NEC-ESR10), S. Kumar (i2CAT-ESR3), K. Khosroshahi (CNRS-ESR8), T.A.O. Yusuf (NEC-ESR11), Deliverable number D3.1: State of the art on 5G industrial networks and slicing for IIoT, March 2023. Available: https://5gsmartfact.upc.edu/results/deliverables., In this deliverable, ESR2 discussed end-2-end network slicing for dense networks with mMTC, eMBB and URLLC requirements for Industrial Internet-of-Things (IIoT). The architecture and enabling technologies of network slicing and network slice management are presented as well as the system requirements for some smart factory use cases. A survey of the recent research work in this area is also carried out and the open research challenges are highlighted. Some AI techniques that enable the development of dynamic slice aware resource allocation and slice admission control schemes were briefly mentioned. Finally, the overall scope of the PhD research and the research directions are discussed., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Computación frontera: influencia de latencias en la precisión de robots

  • Urbaniak, Dominik
  • Rosell Gratacòs, Jan
  • Suárez Feijóo, Raúl
  • Suppa, Michael
La computación en la frontera (edge computing) permite acceder a grandes recursos computacionales y a redes de computadores, facilitando que pequeños dispositivos con recursos limitados realicen cálculos complejos descargándolos en computadores potentes de la red, y permite que la latencia en la comunicación se pueda reducir en comparación con la computación en la nube (cloud computing). Los robots móviles autónomos podrían beneficiarse enormemente de computación en la frontera, ya que en general su energía y recursos computacionales son limitados, pero su uso les permitiría realizar tareas computacionalmente complejas y que requieran adaptaciones rápidas a un entorno cambiante. En este trabajo se realiza una comparación del impacto de las tecnologías de comunicación más destacadas usando como tarea de ensayo, en simulación con Gazebo y ROS2, la corrección de la orientación de un cubo al ser empujado por un robot manipulador UR5e equipado con una pinza de dedos paralelos Robotiq 2F-85. Los resultados muestran un mejor rendimiento de 5G Ultra Reliable Low-Latency Communication (URLLC) sobre las comunicaciones 5G y 4G privadas, reduciendo la media del error de orientación en un 36% y 55 %, respectivamente, tras haber realizado 50 acciones de corrección de la orientación con cada tecnología., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-cost 3D indoor visible light positioning: algorithms and experimental validation, Localització en 3D de baix cost basada en llum: algorismes i validació experimental

  • Khan, Sanjha
  • Paradells Aspas, Josep
  • Catalán, Marisa
Visible light technology presents significant advancement for indoor IoT applications. These systems offer enhanced bit rate transmission, enabling faster and reliable data transfer. Moreover, optical-based visible light systems facilitate improved location services within indoor environments. However, many of these systems still exhibit limited accuracy within several centimeters, even when relying on costly high-resolution cameras. This paper introduces a novel low-cost visible light system for 3D positioning, designed to enhance indoor positioning accuracy using low-resolution images. Initially, we propose a non-integer pixel (NI-P) algorithm to enhance precision without the need for higher-resolution images. This algorithm allows the system to identify the precise light spot coordinates on the low-resolution images, enabling accurate positioning. Subsequently, we present an algorithm leveraging the precise coordinate data from the previous step to determine the 3D position of objects even in front of errors in the measures. Benefiting from high accuracy, reduced cost, and low complexity, the proposed system is suitable for implementation on low-end hardware platforms, thereby increasing the versatility and feasibility of visible light technologies in indoor settings. Experimental results show an average 2D positioning error of 1.08 cm and 3D error within 1.4 cm at 2.3 m separation between the object and camera, achieved with an average positioning time of 20 ms on a low-end embedded device. Consequently, the proposed system offers fast and highly accurate indoor positioning and tracking capabilities, making it suitable for applications like mobile robots, automated guided vehicles, and indoor parking management. Furthermore, it is easy to deploy and does not require re-calibration., This research was partially funded by the European Union’s Horizon 2020 5GSmartFact project under the Marie Skłodowska-Curie grant agreement ID 956670, by CDTI and the European Union NextGenerationEU/PRTR within the call Ayudas Cervera para Centros Tecnológicos 2023 under grant 6G-DIFERENTE (CER-20231018) and by the Spanish MCIN/AEI/10.13039/501100011033 through project PID 2019-106808RA-100., Peer Reviewed, Postprint (published version)