Pasar al contenido principal

RED MALLADA IOT CON RADIO DE BAJA POTENCIA

PID2019-106808RA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 93
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A QoS harmonization strategy for Wi-Fi and cellular networks convergence

  • Jain, Akshay|||0000-0002-6986-2720
  • Garcia, Daniel
  • Darroudi, Seyed Mahdi
  • López Aguilera, M. Elena|||0000-0002-6987-8466
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Beyond 5G networks will not only present an evolution of the current 5G standards, but they will also provision a path for increased convergence with other Radio Access Technologies (RATs). The Wi-Fi Alliance and 3GPP through their standards releases have presented a lucrative inter-working opportunity for the same. Such a convergence will help to enhance the Quality of Experience (QoE) for the users. However, one of the most important challenge towards a more converged scenario is the provision of uniform Quality of Service (QoS) across cellular and Wi-Fi RATs. Hence in this paper, to the best of our knowledge, we propose the first attempt in literature to homogenize Wi-Fi and 5G QoS. Specifically, a method is presented to map Wi-Fi QoS parameters to 5G QoS Identifiers (5QI). The presented results, which show a clear possibility of the 5G and Wi-Fi QoS harmonization, have been obtained via a real testbed setup., This research was funded in part by the Spanish MCIN/AEI/10.13039/501100011033 through PID2019-106808RA-I00.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Genetic algorithm-based grouping strategy for IEEE 802.11ah networks

  • García Villegas, Eduard|||0000-0002-6005-9608
  • López García, Alejandro
  • López Aguilera, M. Elena|||0000-0002-6987-8466
The IEEE 802.11ah standard is intended to adapt the specifications of IEEE 802.11 to the Internet of Things (IoT) scenario. One of the main features of IEEE 802.11ah consists of the Restricted Access Window (RAW) mechanism, designed for scheduling transmissions of groups of stations within certain periods of time or windows. With an appropriate configuration, the RAW feature reduces contention and improves energy efficiency. However, the standard specification does not provide mechanisms for the optimal setting of RAW parameters. In this way, this paper presents a grouping strategy based on a genetic algorithm (GA) for IEEE 802.11ah networks operating under the RAW mechanism and considering heterogeneous stations, that is, stations using different modulation and coding schemes (MCS). We define a fitness function from the combination of the predicted system throughput and fairness, and provide the tuning of the GA parameters to obtain the best result in a short time. The paper also includes a comparison of different alternatives with regard to the stages of the GA, i.e., parent selection, crossover, and mutation methods. As a proof of concept, the proposed GA-based RAW grouping is tested on a more constrained device, a Raspberry Pi 3B+ , where the grouping method converges in around 5 s. The evaluation concludes with a comparison of the GA-based grouping strategy with other grouping approaches, thus showing that the proposed mechanism provides a good trade-off between throughput and fairness performance.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Novel architecture for cellular IoT in future non-terrestrial networks: store and forward adaptations for enabling discontinuous feeder link operation

  • Kellermann, Timo Nicolas|||0000-0001-7860-1330
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Camps-Mur, Daniel
  • Ferrús Ferré, Ramón Antonio|||0000-0002-8296-6233
  • Guadalupi, Marco
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Internet of Things (IoT) paradigm has already progressed from an emerging technology to an incredibly fast-growing field. Defined as one of the three key services in 5th Generation (5G), massive Machine Type Communications (mMTC) are intended to enable the wide-spread adoption of IoT services across the globe. Satellite-based Non-Terrestrial Networks (NTN) are crucial in providing connectivity with global coverage including rural and offshore areas, which are fundamental for supporting important use cases in future networks. A rapidly growing market for IoT devices with mMTC applications using NarrowBandIoT (NB-IoT) will represent a large share of user equipment (UE) in such areas. While standardization efforts for NTN are underway for forthcoming 3GPP releases, they focus on transparent payload architectures where the satellite platform is necessarily connected to a ground station gateway to be able to provide satellite access services to IoT devices, thus requiring complex ground segment infrastructure in low Earth orbit (LEO) constellation deployments to achieve global coverage. In contrast, satellite network deployments targeting the delivery of delay-tolerant IoT applications using NB-IoT, which are a major mMTC use case, can benefit from architectures based on the use of regenerative payloads in the satellite and support for Store and Forward (S&F) operation where satellite access can remain operational even at times when the satellite is not connected to a ground station. In particular, such an approach would allow for extending satellite service coverage in areas where satellites cannot be connected to ground stations (e.g. maritime or very remote areas with lack of ground-stations infrastructures), improving ground segment affordability by enabling operation with fewer ground-stations and allowing more robust operation of the satellite under intermittent feeder link operation. In this paper, we provide a high-level design of an extended 3GPP architecture featuring store and forward mechanisms for IoT NTN delay-tolerant applications that address the previous challenges, as well as a laboratory validation of said architecture for a specific use case., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Perspective on the impact of the massiveness of mega-constellations on diverse ecosystems

  • Baselga Lahoz, Oscar
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Ruiz-de-Azua, Joan
From the irruption of the New Space paradigm, a multitude of disruptive initiatives and cutting-edge technologies emerged in the space sector, resulting in the creation of new vertical domains. In recent years, satellite systems have been envisaged for communications to provide ubiquitous, global, and broadband services. However, the demanding requirements can only be met by large Low Earth Orbit satellite constellations (i.e., mega-constellations). This industry of massive space-based networks, currently led by SpaceX, is converging with the 3GPP Non-Terrestrial Networks market due to their common trend. For this purpose, satellite operators are partnering with Mobile Network Operators to access their 3GPP-compliant frequency spectrum and implement Direct-to-Handset technologies. Nevertheless, mega-constellations pose major problems to multiple global ecosystems. This paper delves into the economic, governance, sustainability, astronomical, and coexistence issues arising from the mega-constellation industry and offers a new perspective on how the space ecosystem should evolve to avoid collapse., This work has been co-funded by the Generalitat de Catalunya and the European Social Fund (Joan Or´ o Grants to hire research staff in training FI 2023, no. 2023 FI-1 00861), by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union– NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-8-6GSatNet-SeS), by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, by the Grant 6G-DIFERENTE (CER-20231018) funded by CDTI, by the European Union NextGenerationEU/PRTR within the call, in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330 and by the European Union’s Horizon Europe under Grant Agreement no. 101096526 (ETHER)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Packet fragmentation over Sigfox: implementation and performance evaluation of SCHC ACK-on-error

  • Aguilar Romero, Sergio|||0000-0001-5808-5658
  • Wistuba La-Torre, Diego s.
  • Platis, Antonio
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Céspedes, Sandra
  • Zúñiga, Juan Carlos
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The Static Context Header Compression and fragmentation (SCHC) framework has been recently designed by the IETF. SCHC provides adaptation layer functionality intended to efficiently support IPv6-based and other applications over LPWAN technologies. As of the writing, technology-specific profiles are being standardized in order to describe how SCHC can be tailored when used over a given underlying technology. In this paper, we provide the first performance evaluation of SCHC over Sigfox, a flagship LPWAN technology. We focus on the main SCHC over Sigfox fragmentation mode, called ACKon-Error, which offers low overhead, reliability, and reassembly functionalities. We provide a theoretical analysis and an experimental evaluation in real environments that correspond to two geographical zones with different Sigfox radio settings: Barcelona (Spain) and Santiago (Chile). The study focuses on modeling and evaluating packet transfer times, and the required number of uplink and downlink messages. The results show that a small change in packet sizes may significantly affect the transfer times, especially when no duty-cycle restrictions are enforced. Also, we observe that, under certain conditions, an increase in the fragment loss rate may decrease the packet transfer time, and that the number of uplink and downlink messages is not proportional to such increase due to the fact that downlink messages are device-driven. The results provide useful insights for researchers, developers, implementers, and providers, with applicability to the application design, network planning, and resource management of IoT solutions., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI / FSE / EU, and and grant PID2019-106808RA-I00 funded by MCIN / AEI / 10.13039/501100011033. This work was also supported by ANID Chile Project FONDECYT Regular 1201893, FONDEF/CONICYT 2019 Folio ID19I10363, and ANID Basal Project FB0008. (Corresponding author: Sergio Aguilar.), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

CARAMEL: results on a secure architecture for connected and autonomous vehicles detecting GPS spoofing attacks

  • Vitale, Christian
  • Piperigkos, Nikos
  • Laoudias, Christos
  • Ellinas, Georgios
  • Casademont Serra, Jordi|||0000-0003-0946-7232
  • Escrig, Josep
  • Kloukiniotis, Andreas
  • Lalos, Aris
  • Moustakas, Konstantinos
  • Diaz Rodriguez, Rodrigo
  • Baños, Daniel
  • Roqueta Crusats, Gemma
  • Kapsalas, Petros
  • Hofmann, Klaus Peter
  • Khodashenas, Pouria Sayyad
The main goal of the H2020-CARAMEL project is to address the cybersecurity gaps introduced by the new technological domains adopted by modern vehicles applying, among others, advanced Artificial Intelligence and Machine Learning techniques. As a result, CARAMEL enhances the protection against threats related to automated driving, smart charging of Electric Vehicles, and communication among vehicles or between vehicles and the roadside infrastructure. This work focuses on the latter and presents the CARAMEL architecture aiming at assessing the integrity of the information transmitted by vehicles, as well as at improving the security and privacy of communication for connected and autonomous driving. The proposed architecture includes: (1) multi-radio access technology capabilities, with simultaneous 802.11p and LTE-Uu support, enabled by the connectivity infrastructure; (2) a MEC platform, where, among others, algorithms for detecting attacks are implemented; (3) an intelligent On-Board Unit with anti-hacking features inside the vehicle; (4) a Public Key Infrastructure that validates in real-time the integrity of vehicle’s data transmissions. As an indicative application, the interaction between the entities of the CARAMEL architecture is showcased in case of a GPS spoofing attack scenario. Adopted attack detection techniques exploit robust in-vehicle and cooperative approaches that do not rely on encrypted GPS signals, but only on measurements available in the CARAMEL architecture., This work was supported by the European Union’s H2020 research and innovation programme under the CARAMEL project (Grant agreement No. 833611). The work of Christian Vitale, Christos Laoudias and Georgios Ellinas was also supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant 739551 (KIOS CoE) and from the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development. The work of Jordi Casademont and Pouria Sayyad Khodashenas was also supported by FEDER and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya through projects Fem IoT and SGR 2017-00376 and by the ERDF, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data transmission in store and forward based Non-Terrestrial Networks for IoT use cases

  • Kellermann, Timo Nicolas|||0000-0001-7860-1330
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
Non-Terrestrial Networks (NTNs) are critical enablers of beyond 5G and 6G connectivity, particularly for expanding the reach of massive Machine-Type Communications (mMTC) in the Internet of Things (IoT) domain. Narrowband-IoT (NB-IoT) is a leading protocol for these use cases, and its integration with NTNs offers the potential to provide connectivity in remote or underserved areas via satellite-based communication. However, NTNs introduce several challenges, particularly in the context of paging and data transmission, due to the inherent discontinuities in coverage caused by satellite movement and the non-concurrent operation of feeder and service links. This paper presents a novel design of an architecture for NTNs that effectively addresses the challenges of paging and data transmission in LEO satellite constellations operating in store and forward mode. The focus is to minimize delays and maximizing paging success rates. We evaluate the architecture through simulation of a Low Earth Orbit (LEO) satellite constellation, exploring key performance metrics such as end-to-end transmission delay and the impact of accurate UE location information on paging efficiency. The results demonstrate the architecture’s ability to significantly reduce delays using dynamic forwarding strategies based on predicted satellite contact windows, making it a viable solution for future NTN-based IoT deployments., This work was supported and funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union– NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-1-6GSatNet-GS). and by the European Union’s Horizon Europe under Grant Agreement no. 101096526 (ETHER). Furthermore, this research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, PID2023-146378NB-I00 and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Energy-efficient wireless mesh networks with IEEE 802.11ba: a new architecture

  • Sánchez Vital, Roger|||0000-0003-0976-5766
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • García Villegas, Eduard|||0000-0002-6005-9608
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. DOI: 10.1109/ISCC58397.2023.10218013, In traditional IoT applications, energy saving is crucial, whereas the demand for high bandwidth is not frequent. Nonetheless, a new generation of IoT applications show a wider and varying range of requirements, where bandwidth or delay become key performance indicators to consider, which can be satisfied by technologies like Wi-Fi. However, Wi-Fi does not provide a long link range, and it exhibits a high energy consumption. To solve these issues, we propose a Wi-Fi mesh architecture where devices are equipped with a secondary, Wake-up Radio (WuR) interface, based on the new IEEE 802.11ba amendment. A WuR allows the main radio to remain in a power-saving state for long periods. Simulation results demonstrate that this architecture drastically reduces energy consumption, while keeping delay figures similar to those of traditional, single-interface approaches. To our best knowledge, this work pioneers the exploration of WuR's practicality in optimizing energy consumption in Wi-Fi-based mesh networks.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrating geographical information systems in management and orchestration of satellites constellation to achieve a spatial-aware 6G Non-Terrestrial Networks architecture

  • Ávila Acosta, José Luis
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Ruiz-de-Azua, Joan
  • Rouzegar, Hossein
  • Figuerola, Sergi
5G networks are expanding rapidly, driven by cloud technologies such as Network Function Virtualization (NFV) and orchestrated through Management And Orchestration (MANO) Systems. Despite this fast grow, the goal of providing global coverage and serving remote areas remains. Non-Terrestrial Networks (NTN), leveraging on satellite constellations, emerge as a transformative solution for 6G, providing seamless and global connectivity. Utilizing virtualization technologies, these satellite constellations can form cooperative clusters and function as distributed data centers in space, able to deploy ubiquitous virtualized based applications. Nevertheless, the dynamic nature and geographical spread of these networks present unique challenges. Traditional MANO systems, designed for terrestrial infrastructures, struggle to address the inherent mobility of satellite nodes and service deployment based in target areas (geographical deployment). The main contribution of this work is the proposal of the integration of Geographic Information Systems (GIS) into 6G satellite network management through MANO systems. By harnessing the power of spatial data capture, analysis, and visualization, GIS optimizes resource distribution across the satellite cluster based on location and future network topology prediction. This system can also be used to allow operators to understand coverage patterns and define the geographical boundaries of services offered by satellites in constant movement. To address these challenges, this work presents a development of a GIS extension for ETSI MANO architecture. This plugin enhances the MANO systems by enabling dynamic scaling, which adjusts resource allocation based on satellite movement and projected position. Additionally, it facilitates seamless migration, which ensures service continuity during satellite handovers, thereby guaranteeing uninterrupted connectivity. Furthermore, an experimental testbed validates the proposed architecture and its performance in various scenarios, ranging from single satellites to highly interconnected constellations. This research demonstrates the importance of GIS in spatially informed network function virtualization for NTNs, and prove the importance of GIS in managing satellite clusters through MANO systems. The incorporation of GIS technology in this research facilitates the provision of spatially aware services on satellite clusters. This research presents crucial findings on the performance of GIS-enabled MANO systems for enhancing network planning and operational efficiency in the context of 5G and beyond, particularly in NTNs., This work is co-funded by the Spanish MCIN/AEI/ 10.13039/501100011033 through projects PID2019106808RA-I00, PID2023-146378NB-I00 and by Secretaria d'Universitats i Recerca del departament d'Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330, by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-16GSatNet-GS), ETHER project by the EU’s Horizon Europe program (GA Nº 101096526), by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive solution for securing connected and autonomous vehicles

  • Kamal, Mohsin
  • Kyrkou, Christos
  • Piperigkos, Nikos
  • Papandreou, Andreas
  • Kloukiniotis, Andreas
  • Casademont Serra, Jordi|||0000-0003-0946-7232
  • Porras, Natalia
  • Baños, Daniel
  • Diaz, Rodrigo
  • Durante, Nicola Gregorio
  • Hofmann, Klaus Peter
  • Kapsalas, Petros
  • Lalos, Aris
  • Moustakas, Konstantinos
  • Laoudias, Christos
  • Theocharides, Theocharides
  • Ellinas, Georgios
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., With the advent of Connected and Autonomous Vehicles (CAVs) comes the very real risk that these vehicles will be exposed to cyber-attacks by exploiting various vulnerabilities. This paper gives a technical overview of the H2020 CARAMEL project (currently in the intermediate stage) in which Artificial Intelligent (AI)-based cybersecurity for CAVs is the main goal. Most of the possible scenarios are considered, by which an adversary can generate attacks on CAVs, such as attacks on camera sensors, GPS location, Vehicle to Everything (V2X) message transmission, the vehicle’s On-Board Unit (OBU), etc. The counter-measures to these attacks and vulnerabilities are presented via the current results in the CARAMEL project achieved by implementing the designed security algorithms., This work was supported by the European Union’s H2020 research and innovation programme under the CARAMEL project (Grant agreement No 833611). The work of M.K., C.K., C.L., T.T., and G.E. has also been supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 739551 (KIOS CoE- TEAMING) and from the Republic of Cyprus through the Deputy Ministry of Research, Innovation and Digital Policy. The work of J.C. has also been supported by grants PID2019-106808RA-I00 and PID2020-112675RB funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the energy performance of iridium satellite IoT technology

  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Darroudi, Seyed Mahdi
  • Naranjo Silva, Héctor Sebastián|||0000-0002-1430-8140
  • Paradells, Josep
Most Internet of Things (IoT) communication technologies rely on terrestrial network infrastructure. When such infrastructure is not available or does not provide sufficient coverage, satellite communication offers an alternative IoT connectivity solution. Satellite-enabled IoT devices are typically powered by a limited energy source. However, as of this writing, and to our best knowledge, the energy performance of satellite IoT technology has not been investigated. In this paper, we model and evaluate the energy performance of Iridium satellite technology for IoT devices. Our work is based on real hardware measurements. We provide average current consumption, device lifetime, and energy cost of data delivery results as a function of different parameters. Results show, among others, that an Iridium-enabled IoT device, running on a 2400 mAh battery and sending a 100-byte message every 100 min, may achieve a lifetime of 0.95 years. However, Iridium device energy performance decreases significantly with message rate., This work was supported in part by the Spanish Government through project PID2019- 106808RA-I00, AEI/FEDER, EU, and by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya through project 2017 SGR 376.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis and proposal of strategies for the management of drone swarms through Wi-Fi technologies

  • Betcher Sbrolla, Guido|||0009-0001-0069-8336
  • López Aguilera, M. Elena|||0000-0002-6987-8466
  • García Villegas, Eduard|||0000-0002-6005-9608
The main purpose of this paper is to explore the benefits of combining two radio interfaces onboard an unmanned aerial vehicle (UAV) to communicate with a ground control station (GCS) and other UAVs inside a swarm. The goals are to use the IEEE 802.11ah standard (Wi-Fi HaLow) combined with the IEEE 802.11ax specification (Wi-Fi 6/6E) to enable real-time video transmission from UAVs to the GCS. While airport runway inspection serves as the proof-of-concept use case, the proposed multi-hop architectures apply to other medium-range UAV operations (i.e., a few kilometers) requiring real-time video transmission, such as natural disaster relief and agricultural monitoring. Several scenarios in which a UAV swarm performs infrastructure inspection are emulated. During the missions, UAVs have to send real-time video to the GCS through a multi-hop network when some damage in the infrastructure is found. The different scenarios are studied by means of emulation. Emulated scenarios are defined using different network architectures and radio technologies. Once the emulations finish, different performance metrics related to time, energy and the multi-hop video transmission network are analyzed. The capacity of a multi-hop network is a limiting factor for the transmission of high-quality video. As a first contribution, an expression to find this capacity from distances between UAVs in the emulated scenario is found using the NS-3 simulator. Then, this expression is applied in the algorithms in charge of composing the multi-hop network to offer on-demand quality video. However, the main contribution of this work lies in the development of efficient mechanisms for exchanging control information between UAVs and the GCS, and for forming a multi-hop network to transmit video., This research was funded in part by the Spanish MCIN/AEI/10.13039/501100011033/ FEDER/UEthrough projects PID2019-106808RA-I00 and PID2023-146378NB-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., 9 - Indústria, Innovació i Infraestructura, 7 - Energia Assequible i No Contaminant, 11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard|||0000-0002-6005-9608
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ.
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V03, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V03

  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
Internet Draft version 3 of CoAP over BP, The Bundle Protocol (BP) was designed to enable end-to-end communication in challenged networks. The Constrained Application Protocol (CoAP), which was designed for constrained-node networks, may be a suitable application-layer protocol for the scenarios where BP is used. This document specifies how CoAP is carried over BP.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrating satellite and network operations for NB-IoT NTN connectivity: in-orbit test design of the Constellation Management System

  • Singla Manau, Arnau|||0000-0002-8539-3688
  • Criscola, Franco
  • Canales, David
  • Fraire, Juan A.
  • Betorz Martínez, Francesc
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Munoz-Martin, Joan Francesc
  • Guadalupi, Marco
  • Ruiz de Azua, Joan Adria
With the technological advancements in software and hardware and the cost reduction of satellite launches, there has been a surge in future planned Low Earth Orbit (LEO) constellations aimed at providing Internet of Things (IoT) services. Leveraging these constellations to extend terrestrial networks for global coverage has become a key focus, as evidenced by the standardization of Non-Terrestrial Networks (NTN) by 3GPP. However, managing operations in satellite-based NTN poses significant challenges due to the intersection of satellite operations and network management, especially in sparse constellations with intermittent connectivity. Another challenge is the need for satellite operations to adhere to standard-compliant procedures, such as those set forth by 3GPP standards. This ensures satellite services align with established industry norms, facilitating interoperability and compatibility with existing network infrastructures. A Constellation Management System (CMS) has been developed in response to these challenges. This system is an autonomous framework designed to seamlessly integrate satellite and network operations. The CMS integrates all the necessary agents and coordinates satellite and network operations in this heterogeneous scenario by providing business policy- and resource-aware task schedules. This facilitates the alignment of contact and task plans for satellites, ground station networks, and core networks, and it ultimately enables the extension of existing terrestrial networks through satellite-based NTN. This work presents a means to validate this novel approach through a dedicated CubeSat mission scheduled for the end of 2024. The final paper details the mission architecture incorporating the CMS, including interfaces and telemetry feedback mechanisms for autonomous rescheduling during the mission. Additionally, it describes the test design and procedures, along with the necessary developments for the CMS operation in space, both on the ground and in satellites. These developments encompass the required architecture for dynamic CMS operation during the mission, resource tracking, telemetry integration, and establishment of baseline operational parameters for performance evaluation. This work represents a significant step towards enhancing the capabilities of satellite-based IoT services and advancing the seamless integration of terrestrial and satellite networks on a global scale. To the authors' knowledge, this marks the first mission attempting to implement this innovative task-scheduling approach within a telecommunications satellite constellation providing NB-IoT services., This work has been funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work was funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-1-6GSatNetGS). This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. This paper is also part of the Grant 6GDIFERENTE (CER-20231018) funded by CDTI and by the European Union NextGenerationEU/PRTR within the call ”Ayudas Cervera para Centros Tecnológicos 2023., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of Direct-to-Satellite IoT for monitoring water reservoirs in remote areas to prevent wildfires

  • Marín de Yzaguirre, Marcel
  • Baselga Lahoz, Oscar
  • Pagès, Joan
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Guixé Jové, Pol
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-Terrestrial Networks are three-dimension net-works composed of aircraft and spacecraft nodes that extend the services provided by terrestrial infrastructure. This kind of network plays a key role in the deployment of Internet of Things (IoT) connectivity in remote areas, which are more probable to currently lack it. Among the different alternatives, the usage of satellite systems to conform these new networks that provides IoT connectivity has emerged as a promising solution. In this scenario, IoT devices directly interacts with satellites with Low-Power Wide Area Network technologies. This approach is defined in the literature as a Direct-to-Satellite IoT (DtS-IoT) architecture. This work contributes to the DtS-IoT concept by presenting an experimental deployment following this architecture. Specifically, a dedicated sensor that monitors water reservoirs located in remote areas are installed. The sensor collects the status of the reservoirs and uploads it to the satellite. This application becomes essential for the maintenance of the firefighter infrastructure, which typically is located in the mountains. This work presents thus the architecture design, the sensor setup, and discusses the achieved results of an in-field campaign. These results demon-strate the feasibility of this deployment with current technologies, and promotes its deployment in future projects., This work was co-funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, by the Generalitat de Catalunya and the European Social Fund (Joan Oro´ Grants to hire research staff in training FI 2023), and by the Spanish MCINAEI 10.13039501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. Additionally, the authors would like to acknowledge the inkind support of Departament d’Interior of the Government of Catalonia., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Preparing Wi-Fi 7 for healthcare Internet-of-Things, Posant a punt el Wi-Fi 7 per a la Internet de les Coses (IoT) en aplicacions de salut, Poniendo a punto Wi-Fi 7 para la Internet de las Cosas (IoT) en aplicaciones de salud

  • Qadri, Yazdan Ahmad
  • Nain, Zulqar
  • Nauman, Ali
  • Musaddiq, Arslan
  • García Villegas, Eduard|||0000-0002-6005-9608
  • Kim, Sung Won
The healthcare Internet of Things (H-IoT) is an interconnection of devices capable of sensing and transmitting information that conveys the status of an individual’s health. The continuous monitoring of an individual’s health for disease diagnosis and early detection is an important application of H-IoT. Ambient-assisted living (AAL) entails monitoring a patient’s health to ensure their well-being. However, ensuring a limit on transmission delays is an essential requirement of such monitoring systems. The uplink (UL) transmission during the orthogonal frequency division multiple access (OFDMA) in the wireless local area networks (WLANs) can incur a delay which may not be acceptable for delay-sensitive applications such as H-IoT due to their random nature. Therefore, we propose a UL OFDMA scheduler for the next Wireless Fidelity (Wi-Fi) standard, the IEEE 802.11be, that is compliant with the latency requirements for healthcare applications. The scheduler allocates the channel resources for UL transmission taking into consideration the traffic class or access category. The results demonstrate that the proposed scheduler can achieve the required latency for H-IoT applications. Additionally, the performance in terms of fairness and throughput is also superior to state-of-the-art schedulers., This research was supported in part by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education (NRF-2021R1A6A1A03039493), in part by the NRF grant funded by the Korea government (MSIT) (NRF-2022R1A2C1004401), and in part by Spanish MCIN/AEI/10.13039/501100011033 through project PID2019-106808RA-I00.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

How sufficient is TCP when deployed in 5G mmWave networks over the urban deployment?

  • Poorzare, Reza
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., By deploying the millimeter-wave wide spectrum in 5G networks, the new generation is capable of providing high data rates with low latencies. However, these frequencies have intermittent characteristics as their downside, which acts as a hurdle on the way of attaining high performances. This disadvantage can lower signals’ penetration power in reaching far distances or passing materials such as vehicles, walls, and even human bodies. As a result, having a reliable end-to-end connection throughout 5G millimeter-wave networks can be challenging because this burden is on the transport layer mostly exploited protocol, TCP, which is unable to perform sufficiently due to the fluctuation of the high-frequency channels. This paper aims to analyze TCP’s behavior in one of the 3GPP’s well-known scenarios called urban deployment. The detailed investigation of TCP over 5G millimeter-wave when used in a city and the impact of different parameters such as remote servers, RLC buffer size, different congestion control algorithms, and maximum segment size are discussed thoroughly throughout the paper. The results revealed that TCP could benefit from the edge server deployment due to the shorter control loop, and increasing maximum segment size can also enhance this superiority. Moreover, individual TCP variants react to various RLC buffer sizes differently. However, in general, increased throughput can be attained by deploying larger buffers at the cost of latency., This work was supported in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376, and in part by the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V01, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V01

  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
Internet Draft version 1 of CoAP over BP, The Bundle Protocol (BP) was designed to enable end-to-end communication in challenged networks. The Constrained Application Protocol (CoAP), which was designed for constrained-node networks, may be a suitable application-layer protocol for the scenarios where BP is used. This document specifies how CoAP is carried over BP.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The SF12 well in LoRaWAN: problem and end-device-based solutions

  • Casals Ibáñez, Lluís|||0000-0002-1203-0595
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
© 2021 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), LoRaWAN has become a popular technology for the Internet of Things (IoT) device connectivity. One of the expected properties of LoRaWAN is high network scalability. However, LoRaWAN network performance may be compromised when even a relatively small number of devices use link-layer reliability. After failed frame delivery, such devices typically tend to reduce their physical layer bit rate by increasing their spreading factor (SF). This reaction increases channel utilization, which may further degrade network performance, even into congestion collapse. When this problem arises, all the devices performing reliable frame transmission end up using SF12 (i.e., the highest SF in LoRaWAN). In this paper, we identify and characterize the described network condition, which we call the SF12 Well, in a range of scenarios and by means of extensive simulations. The results show that by using alternative SF-management techniques it is possible to avoid the problem, while achieving a packet delivery ratio increase of up to a factor of 4.7.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Understanding the impact of packet size on the energy efficiency of LoRaWAN

  • Casals Ibáñez, Lluís|||0000-0002-1203-0595
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
LoRaWAN has become a flagship LPWAN technology, and one of the main connectivity alternatives for IoT devices. Since LoRaWAN was designed for low energy consumption, it is fundamental to understand its energy performance. In this paper, we study the impact of packet size on LoRaWAN device energy consumption per delivered data bit (EPB). By means of extensive simulations, we show that, when network performance is very high or very low, EPB decreases steadily with packet size; otherwise, EPB may show an “asymmetric U” shape as a function of packet size, with a minimum EPB value that is achieved for a medium packet size. We also provide detailed insights on the reasons that produce the observed behaviors., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI/FSE/EU, grant PID2019-106808RAI00 funded by MCIN/AEI/10.13039/501100011033, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Demo: interoperability between cellular and V2X networks (802.11p / LTE-PC5) under a Cloud Native Edge Scenario

  • Marias i Parella, Jordi
  • Pino, Adrián
  • Cordero, Bruno
  • Casademont Serra, Jordi|||0000-0003-0946-7232
  • Carmona Cejudo, Estela
  • Vazquez-Gallego, Francisco
By leveraging the use of wireless communication technologies and edge computing capabilities, Cooperative Intelligent Transport Systems (C-ITS) aim to improve safety and traffic management in mobility use cases. However, the deployment of C-ITS poses some critical challenges. Specifically, in heterogeneous systems, it is necessary to guarantee interoperability among the various available wireless technologies. This paper presents a cloud native infrastructure architecture for vehicular communications that guarantees the interoperability between cellular technologies (4G/5G), and specific Vehicle-to-Everything (V2X) communication technologies, such as LTE-PC5 and IEEE 802.11p wireless communications standards. Such interoperability is demonstrated through the implementation of an Edge Infrastructure where a vehicle equipped with one of the aforementioned radio access technologies, sends cooperative awareness messages, and such messages are received in vehicles provisioned with different wireless technologies., This work was supported by the grants ONOFRE-3 PID2020-112675RB-C43 and PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033, INTEGRA CER20211031 funded by CDTI Cervera, the PODIUM project (101069547) funded by the European Commission, and the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 951947 (5GMED). The authors would also like to acknowledge CERCA Programme Generalitat de Catalunya for sponsoring part of this work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy performance of LR-FHSS: analysis and evaluation

  • Sánchez Vital, Roger|||0000-0003-0976-5766
  • Casals Ibáñez, Lluís|||0000-0002-1203-0595
  • Heer Salva, Bartomeu
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • García Villegas, Eduard|||0000-0002-6005-9608
Long-range frequency hopping spread spectrum (LR-FHSS) is a pivotal advancement in the LoRaWAN protocol that is designed to enhance the network’s capacity and robustness, particularly in densely populated environments. Although energy consumption is paramount in LoRaWANbased end devices, this is the first study in the literature, to our knowledge, that models the impact of this novel mechanism on energy consumption. In this article, we provide a comprehensive energy consumption analytical model of LR-FHSS, focusing on three critical metrics: average current consumption, battery lifetime, and energy efficiency of data transmission. The model is based on measurements performed on real hardware in a fully operational LR-FHSS network. While in our evaluation, LR-FHSS can show worse consumption figures than LoRa, we find that with optimal configuration, the battery lifetime of LR-FHSS end devices can reach 2.5 years for a 50 min notification period. For the most energy-efficient payload size, this lifespan can be extended to a theoretical maximum of up to 16 years with a one-day notification interval using a cell-coin battery., This research was funded by the Spanish Government MCIN/AEI/10.13039/501100011033 through projects PID2019-106808RA-I00 and PID2023-146378NB-I00 and by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2021 through grant SGR 00330. The first author gratefully acknowledges a predoctoral program AGAUR-FI grant (2023 FI-1 00154) Joan Oró of the Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats de la Generalitat de Catalunya and the European Fund Social Plus.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

IPv6 over cross-technology communication with wake-up radio

  • Aguilar Romero, Sergio|||0000-0001-5808-5658
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
© 2023 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A variety of wireless (and wired) technologies are being used to enable Internet of Things (IoT) device connectivity. Two examples of popular technologies in some crucial IoT domains (e.g., smart home, smart factories and smart cities, among others) are IEEE 802.15.4 and IEEE 802.11. However, IoT devices supporting different wireless technologies are not interoperable without a gateway. One solution to this problem is exploiting bidirectional Cross-Technology Communication with Wake-up Radio (WuR-CTC). Nevertheless, existing WuR-CTC approaches do not support IPv6, and therefore cannot offer full Internet protocol stack interoperability. For the first time to our knowledge, in this paper, we present the design, implementation and evaluation of an adaptation layer to provide IPv6 support over WuR-CTC, by leveraging the IETF Static Context Header Compression and fragmentation (SCHC) framework. Among others, experimental results show that our solution allows transferring a 127-byte IPv6 packet from an IEEE 802.15.4 device to an IEEE 802.11 device, without a gateway, in 69 ms (in average). Therefore, the designed solution supports latency-stringent applications in smart environments, where a human in the loop expects real-time interaction between devices., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI/FSE/EU, Spain, and grant PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033, Spain, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya, Spain with the grant number 2021 SGR 00330., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An implementation of IoT LPWAN SCHC message fragmentation and reassembly

  • Wistuba, Diego
  • Céspedes, Sandra
  • Zúñiga, Juan Carlos
  • Muñoz Lara, Rodrigo
  • Aguilar Romero, Sergio|||0000-0001-5808-5658
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
This extended abstract reports about the implementation of the fragmentation and reassembly mechanisms of the SCHC framework for Low Power Wide Area Networks (LPWANs). The project aims to program the methods and routines described in the SCHC standard protocol for the fragmentation and reassembly mechanism while being independent of the LPWAN technology and remaining as an open-source project. The implementation addresses the ACK-on-Error mode, where an acknowledgement message is sent back to the sender device only when lost fragments are detected. Initial tests have been successful using a local communication setting with network sockets. We are currently porting the code to support the Sigfox LPWAN using Google Cloud Platform as a cloud computing service and the Python framework Flask for easy testing., Sergio Aguilar, Rafael Vidal and Carles Gomez were funded in part by the Spanish Government through projects TEC2016-79988-P, PID2019-106808RA-I00 (AEI/FEDER, and UE); and the Generalitat de Catalunya Grant 2017 SGR 376., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing satellite non-terrestrial networks through advanced constellation management: optimizing in-orbit resources for NB-IoT

  • Singla Manau, Arnau|||0000-0002-8539-3688
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Bertoz Martínez, Francesc
  • Ruiz de Azua, Joan Adria
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a novel autonomous management system for satellite-based Non-Terrestrial Networks (NTN). It addresses the challenges of managing the operations of Low Earth Orbit (LEO) constellations for the Internet of Things (IoT), emphasizing intermittent connectivity and resource constraints. This work contributes with the description of the scheduler module alongside a customized formulation of a novel multi-objective optimization problem and its associated mathematical framework. The resultant optimization algorithm is elaborated. This Constellation Management System (CMS) is validated through a real-world scenario, revealing substantial improvements of up to 40% in task assignment and throughput rates when compared to a best-effort baseline. This study underscores the CMS’s potential to enhance IoT communication with LEO constellations through resource-efficient and business-aware satellite operations scheduling., This work was supported by the Generalitat de Catalunya; the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU; the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00; and by Departament d’Innovacio, Universitats i Empresa, Generalitat de Catalunya 2021 SGR 00330., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Deep learning TCP for mitigating NLoS impairments in 5G mmWave

  • Poorzare, Reza
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
5G and beyond 5G are revolutionizing cellular and ubiquitous networks with new features and capabilities. The new millimeter-wave frequency band can provide high data rates for the new generations of mobile networks but suffers from NLoS caused by obstacles, which causes packet drops that mislead TCP because the protocol interprets all drops as an indication of network congestion. The principal flaw of TCP in such networks is that the root for packet drops is not distinguishable for TCP, and the protocol takes it for granted that all losses are due to congestion. This paper presents a new TCP based on deep learning that can outperform other common TCPs in terms of throughput, RTT, and congestion window fluctuation. The primary contribution of deep learning is providing the ability to distinguish various conditions in the network. The simulation results revealed that the proposed protocol could outperform conventional TCPs such as Cubic, NewReno, Highspeed, and BBR., This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00", and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard|||0000-0002-6005-9608
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bandwidth-Based Wake-Up Radio solution through IEEE 802.11 technology

  • López Aguilera, M. Elena|||0000-0002-6987-8466
  • García Villegas, Eduard|||0000-0002-6005-9608
IEEE 802.11 consists of one of the most used wireless access technologies, which can be found in almost all consumer electronics devices available. Recently, Wake-up Radio (WuR) systems have emerged as a solution for energy-efficient communications. WuR mechanisms rely on using a secondary low-power radio interface that is always in the active operation mode and is in charge of switching the primary interface, used for main data exchange, from the power-saving state to the active mode. In this paper, we present a WuR solution based on IEEE 802.11 technology employing transmissions of legacy frames by an IEEE 802.11 standard-compliant transmitter during a Transmission Opportunity (TXOP) period. Unlike other proposals available in the literature, the WuR system presented in this paper exploits the PHY characteristics of modern IEEE 802.11 radios, where different signal bandwidths can be used on a per-packet basis. The proposal is validated through the Matlab software tool, and extensive simulation results are presented in a wide variety of scenario configurations. Moreover, insights are provided on the feasibility of the WuR proposal for its implementation in real hardware. Our approach allows the transmission of complex Wake-up Radio signals (i.e., including address field and other binary data) from legacy Wi-Fi devices (from IEEE 802.11n-2009 on), avoiding hardware or even firmware modifications intended to alter standard MAC/PHY behavior, and achieving a bit rate of up to 33 kbps.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Awareness information dissemination using aggregation into collective perception messages for connected vehicles

  • Marias i Parella, Jordi
  • Casademont Serra, Jordi|||0000-0003-0946-7232
  • Vazquez-Gallego, Francisco
  • López Aguilera, M. Elena|||0000-0002-6987-8466
In the last few years, two critical situations have arisen in the ecosystem of Intelligent Transportation Systems (ITS) related to the Vehicle-to-Everything (V2X) radio technologies, that are delaying their commercial development. One is the unclear standard to use for this radio access layer, and the other is the limited coverage range of the used frequencies in the presence of obstacles, like buildings in an urban scenario. In this paper we present an infrastructure architecture, which utilizes edge computing that receives V2X messages in varying radio technologies and optimally forwards awareness information, using CPM messages, to all vehicles regardless of their radio technology, increasing at the same time the area where these messages are received., This work was supported by the PODIUM project (101069547) funded by the European Commission, by the grants PID2019-106808RA-I00 and ONOFRE-3 PID2020-112675RB-C43 funded by MCIN/AEI/10.13039/501100011033 and INTEGRA CER-20211031 funded by CDTI Cervera., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of receiver-feedback techniques for fragmentation over LPWANs

  • Aguilar Romero, Sergio|||0000-0001-5808-5658
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The Internet Engineering Task Force (IETF) has standardized a new framework for IPv6 support over Low Power Wide Area Networks (LPWANs), called Static Context Header Compression and Fragmentation (SCHC). SCHC includes acknowledgment (ACK)-based mechanisms for reliable fragmented packet transmission. For the latter, SCHC defines a Receiver-Feedback Technique (RFT), called Compressed Bitmap (CB), by which a receiver reports to the sender whether the fragments carrying a packet have been received or not. Such information is carried as ACK payload. Considering the extraordinary frame size and message rate constraints of LPWANs, ACK payload size becomes crucial. In this paper, we compare the performance of CB with that of several alternative RFTs, namely List of Lost Fragments (LLF), List of Deltas (LoD), and Uncompressed Bitmap (UB), where the latter is used as a benchmark. We evaluate the considered RFTs in terms of ACK size, number of Layer 2 (L2) frames needed to carry an ACK, and ACK Time on Air. Our analysis shows that the use of RFTs different from CB offers significant performance improvement in many scenarios. Furthermore, we provide guidance on which RFT should be used for different packet sizes, error rates and error patterns., This research is funded in part by the ERDF and the Spanish Government through project TEC2016-79988-P and project PID2019-106808RA-I00, AEI/FEDER, EU., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Exploring the boundaries of energy-efficient Wireless Mesh Networks with IEEE 802.11ba

  • Sánchez Vital, Roger|||0000-0003-0976-5766
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • García Villegas, Eduard|||0000-0002-6005-9608
In traditional IoT applications, energy saving is essential while high bandwidth is not always required. However, a new wave of IoT applications exhibit stricter requirements in terms of bandwidth and latency. Broadband technologies like Wi-Fi could meet such requirements. Nevertheless, these technologies come with limitations: high energy consumption and limited coverage range. In order to address these two shortcomings, and based on the recent IEEE 802.11ba amendment, we propose a Wi-Fi-based mesh architecture where devices are outfitted with a supplementary Wake-up Radio (WuR) interface. According to our analytical and simulation studies, this design maintains latency figures comparable to conventional single-interface networks while significantly reducing energy consumption (by up to almost two orders of magnitude). Additionally, we verify via real device measurements that battery lifetime can be increased by as much as 500% with our approach.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A testbed for a nearby-context aware: threat detection and mitigation system for connected vehicles

  • Martín Pérez, Miguel
  • Marias i Parella, Jordi
  • Fernández Hidalgo, Javier
  • de Juan Fidalgo, Pablo
  • Casademont Serra, Jordi|||0000-0003-0946-7232
  • Álvarez Romero, Antonio
  • Díaz Rodríguez, Rodrigo
The fact than more and more Cyber-Physical or IoT systems are integrated in vehicle fleets, coupled with the growing connectivity of these devices, poses a higher risk of cyber attacks, due to the increased attack surface. To mitigate this problem, we propose and test a collaborative system of Security Information and Event Management (SIEM) systems, where each node has its own autonomous SIEM—allowing the execution of mitigation actions even when the node is isolated—but it shares its context information with the nearby nodes, improving the correlation intelligence to make better informed decisions. The SIEMs are organised in a hierarchy, following the architecture of the monitoring system, where higher SIEMs collect events and alarms from lower SIEMs to make more general decisions and raise alarms. These alarms are forwarded to lower SIEMs to mitigate or prevent attacks on other nodes in the system. This system has been implemented as part of the CPSoSaware project and tested in three scenarios: local, area and global, focusing the demonstrations on the different layers of the project architecture., This work was supported by European Union’s Horizon 2020 program under grant No 871738 (CPSoSaware), by MCIN/AEI/10.13039/501100011033 under grants PID2019- 106808RA-I00 and ONOFRE-3 PID2020-112675RB-C43 and by CDTI Cervera under grant INTEGRA CER-20211031., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Wake-up radio: an enabler of wireless convergence

  • Cervià Caballé, Martí
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Paradells Aspas, Josep|||0000-0003-4185-2202
Nowadays, several wireless communication solutions targeted at low-power devices (e.g. sensors, actuators) compete for market dominance. As a consequence, the deployment of the Internet of Things is slowed by fragmentation. However, Cross-Technology Communication (CTC) has appeared as a solution capable of bridging the compatibility gap between non-interoperable devices. In this way, we propose using Wake-up Radio (WuR) to achieve high rate bidirectional CTC, introducing WuR assisted CTC (WuR-CTC). Although WuR was originally proposed to reduce radio power consumption, it provides a secondary communications channel that can be used for high-speed and bidirectional CTC. With WuRCTC, we demonstrate that WuR can lead to interoperability between non-compatible wireless devices, therefore, providing a compelling reason for the harmonization of the nascent WuR specifications. This article presents a WuR-CTC solution implemented on an heterogeneous testbed with IEEE 802.11 and IEEE 802.15.4 devices. The resulting testbed achieves reliable CTC with an effective throughput of 26.7 kbps. Moreover, the addition of WuR to the testbed devices provides energy savings, and, in a clear advantage over traditional duty-cycled solutions, allows devices to asynchronously maintain communications.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Demonstrations of Direct-to-Satellite IoT for Earth observation applications: remote road traffic monitoring with imaging

  • Marín de Yzaguirre, Marcel
  • Pagès, Joan
  • Baselga Lahoz, Oscar
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Guixé Jové, Pol
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The escalating volume of road users and the increase on safety demands by the governmental institutions, such as the EU, highlights the need for more widespread and advanced traffic monitoring systems. Despite the emergence of traffic monitoring solutions through Earth observation techniques, persistent challenges are evident, particularly in the context of remote and rural roads. This paper presents an innovative approach, integrating ground-based imaging, in-situ Computer Vision (CV) and Direct-to-Satellite Internet of Things (DtS-IoT) for a near-real-time, cost-effective traffic monitoring solution. Focusing on current challenges, this hybrid system demonstrates to be a tailored response to the demands of remote traffic monitoring, showcasing feasibility through a proof-of-concept integrated solution., This work has been co-funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, the Generalitat de Catalunya and the European Social Fund (Joan Oro Grants to ´ hire research staff in training FI 2023), the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RAI00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with grant 2021 SGR 00330., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A primer on AP power save in Wi-Fi 8: overview, analysis, and open challenges

  • Sánchez Vital, Roger|||0000-0003-0976-5766
  • Belogaev, Andrey
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Famaey, Jeroen
  • García Villegas, Eduard|||0000-0002-6005-9608
Wi-Fi facilitates the Internet connectivity of billions of devices worldwide, making it an indispensable technology for modern life. Wi-Fi networks are becoming significantly denser, making energy consumption and its effects on operational costs and environmental sustainability crucial considerations. Wi-Fi has already introduced several mechanisms to enhance the energy efficiency of non-access point (non-AP) stations (STAs). However, the reduction of energy consumption of APs has never been a priority. Always-on APs operating at their highest capabilities consume significant power, which affects the energy costs of the infrastructure owner, aggravates the environmental impact, and decreases the lifetime of battery-powered APs. IEEE 802.11bn, which will be the basis of Wi-Fi 8, makes a big leap forward by introducing the AP power save (PS) framework. In this article, we describe and analyze the main proposals discussed in the IEEE 802.11bn Task Group (TGbn), such as scheduled power save, (semi-)dynamic power save, and cross-link power save. We also consider other proposals that are being discussed in TGbn, namely the integration of wake-up radios (WuRs) and STA offloading. We then showcase the potential benefits of AP PS in several scenarios, including a deployment of 470 real APs on a university campus. Our numerical analysis reveals that AP power consumption can be decreased on average by up to 28 percent, with further improvement potential. Finally, we outline the open challenges that need to be addressed to optimally integrate AP PS in Wi-Fi and ensure its compatibility with legacy devices., This research was funded in part by the Spanish MCIU/ AEI/10.13039/ 501100011033/FEDER/UE through projects PID2019106808RA-I00 and PID2023146378NB-I00, and by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. Roger SanchezVital gratefully acknowledges the predoctoral program AGAUR-FI grant (2023 FI-1 00154) Joan Oroof the Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats de la Generalitat de Catalunya and the European Social Fund Plus.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing LoRa for satellite-to-Earth communications considering the impact of Ionospheric Scintillation

  • Fernández Capón, Lara Pilar|||0000-0002-1223-6892
  • Ruiz De Azúa Ortega, Juan Adrián|||0000-0001-5892-3404
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Since the appearance of 5G, Internet of Things (IoT) has gained an increased interest, with multiple technologies emerging and converging to cover different user needs. One of the biggest challenges today is to have global IoT coverage, ensuring seamless communication with IoT devices placed in rural and even remote areas. Satellite constellations, and in particular CubeSats orbiting in Low Earth Orbit, can provide a solution to these challenges. Out of the technologies available, LoRa (Long Range) has a great potential for implementation in space-to-Earth satellite communications. As the space-to-Earth channel is different with respect to the conventional Earth-to-Earth one, it is important to asses the capabilities of LoRa in this new environment. This paper presents a study of different LoRa device configurations to identify the constrains for each one and determine which one is better for particular mission requirements. Also, the effect of ionospheric scintillation is assessed with a SDR-based (Software-Defined Radio) test set-up that evaluates the performance of this technology against with Humprey's ionospheric scintillation model. This phenomena produces deep signal intensity fadings and phase fluctuations in equatorial regions, and mainly phase fluctuations in high latitudes. The obtained metrics are the received power and the packet delivery ratio as a function of the intensity scintillation index, and show the robustness of the LoRa modulation in these new environments., This work was supported in part by the Spanish Ministry of Economy and Competitiveness, by the Spanish Ministry of Science, Innovationand Universities, Sensing with Pioneering Opportunistic Techniques, under Grant RTI2018-099008-B-C21, in part by the Unidad deExcelencia Maria de Maeztu under Grant MDM-2016-0600, in part by the European Regional Development Fund (ERDF) and the SpanishGovernment under Project PID2019-106808RA-I00 AEI/FEDER UE, and in part by the Secretaria d’Universitats i Recerca delDepartament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376 and Grant 2017 SGR 219, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V02, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V02

  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
Internet Draft version 2 of CoAP over BP, The Bundle Protocol (BP) was designed to enable end-to-end communication in challenged networks. The Constrained Application Protocol (CoAP), which was designed for constrained-node networks, may be a suitable application-layer protocol for the scenarios where BP is used. This document specifies how CoAP is carried over BP.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An improvement over TCP Vegas to enhance its performance in optical burst switching networks

  • Poorzare, Reza
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Abedidarabad, Siamak
This is a post-peer-review, pre-copyedit version of an article published in Optical review. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10043-021-00652-w., The demand for high bandwidth on the Internet is growing drastically, and one of the solutions for tackling this problem is using optical networks. Burst switching is one of the techniques that can be used in optical networks to handle high traffic. Aside from the many advantages that this technique has, it suffers from a big flaw called burst contention. Optical burst switching (OBS) is a switching technique without any buffering system. As a result, when two bursts are trying to reserve one resource, one of them drops. This drawback can have a significant impact on the performance of some protocols like TCP because they have not been designed to perform in a network without any queuing system and cannot distinguish a drop is because of the congestion or contention. In this paper, a new algorithm called AVGR (Average of RTTs) is proposed based on some mathematical equations to prevent the degradation of TCP. It tries to calculate averages for some RTTs in three different periods. Then base on the obtained results, the congestion control mechanism will be modified. The primary goal of the algorithm is to determine the current status of the network and make proper decisions based on it., This work has been funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (2017 SGR 376) and the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

E-model: an analytical tool for fast adaptation of IEEE 802.11 ah RAW grouping strategies

  • Baños González, Víctor Hugo
  • López Aguilera, M. Elena|||0000-0002-6987-8466
  • García Villegas, Eduard|||0000-0002-6005-9608
IEEE 802.11ah is an Internet of Things enabling technology, where the efficient management of thousands of devices is a key function. To this aim, IEEE 802.11ah provides the restricted access window (RAW) mechanism, which reduces contention by enabling transmissions for small groups of stations. Optimal grouping of RAW stations requires an evaluation of many possible configurations. In this paper, we propose an analytical model (named e-model) that provides an evaluation of the RAW configuration performance, allowing a fast adaptation of RAW grouping policies, in accordance to varying channel conditions. We base the e-model in known saturation models, which we adapted to include the IEEE 802.11ah’s PHY and MAC layer modifications and to support different bitrates and packet sizes. As a proof of concept, we use the proposed model to compare the performance of different grouping strategies, showing that the e-model is a useful analysis tool in RAW-enabled scenarios. We validate the model with existing IEEE 802.11ah implementation for NS-3., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrating satellite constellation and mobile operations for non-terrestrial networks: preliminary results of dynamic scheduling

  • Singla Manau, Arnau|||0000-0002-8539-3688
  • Criscola, Franco
  • Canales, David
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Fraire, Juan
  • Ruiz de Azua, Joan Adria
The integration of terrestrial networks with Non-Terrestrial Networks requires a comprehensive management framework to address the mutual impact between satellite operations and network services. Past research by the authors introduced the Constellation Management System (CMS) as a solution, facilitating optimized plans for both satellite and network operators. This paper extends prior work by focusing on enhancing the adaptability of the CMS through dynamic execution methodologies, particularly by integrating telemetry feedback. The study presents a dynamic execution framework and a sequence diagram outlining the rescheduling process. Validation through telemetry emulation demonstrates the system’s agility in responding to telemetry variations and the value of this new architecture using the CMS dynamically. Initial findings indicate a throughput enhancement of 10% with the implementation of a closed-loop approach compared to an open-loop approach. This research advances satellite constellation operations management towards automated communications, enhancing adaptability and robustness in unpredictable and constantly changing environments., This work has been funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work was funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021- 1-6GSatNet-GS). This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. This paper is also part of the Grant 6G-DIFERENTE (CER-20231018) funded by CDTI and by the European Union NextGenerationEU/PRTR within the call ”Ayudas Cervera para Centros Tecnologicos 2023. The research was partially ´ supported by the Embry-Riddle Aeronautical University Faculty Research Development Program and GAANN fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Design and validation of a dual-band circular polarization patch antenna and stripline combiner for the FSSCat mission

  • Fernández Capón, Lara Pilar|||0000-0002-1223-6892
  • Muñoz Martín, Joan Francesc
  • Ruiz de Azua, Joan Adria
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
The FMPL-2 payload on board the 3Cat-5/A 6 Unit CubeSat, part of the FSSCat CubeSat mission, includes a dual L-Band Microwave Radiometer and a Global Navigation Satellite System Reflectometer, in one instrument, implemented in a Software Defined Radio. One of the design challenges of this payload was its Nadir looking Antenna, which had to be directive (> 12 dB), dual-band at 1400–1427 MHz and 1575.42 MHz, left-hand circularly polarized, and with important envelope restrictions, notably with a low profile. After a trade-off analysis, the best design solution appeared to be an array of six elements each of them being a stacked dual-band patch antenna, with diagonal feed to create the circular polarization, and a six to one stripline combiner. The design process of the elementary antennas first includes a theoretical analysis, to obtain the approximate dimensions. Then, by means of numerical simulations, prototyping, and adjusting the results in the simulations, the manufacturing errors and dielectric constant tolerances, to which patch antennas are very sensitive, can be characterized. A similar approach is taken with the combiner. This article includes the theoretical analysis, simulations, and prototype results, including the Flight Model assembly and characterization, This work was by the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) and in part by the European Social Fund (ESF). It is also funded in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2017 SGR 376 and 2017 SGR 219. This work has also been founded by the grant PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033. Finally, this research was possible thanks to the FI-2019 grant from AGAUR-Generalitat de Catalunya, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards federated satellite systems and internet of satellites: the federation deployment control protocol

  • Ruiz de Azua, Joan Adria
  • Garzaniti, Nicola
  • Golkar, Alessandro
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
Presently, the Earth Observation community is demanding applications that provide low latency and high downlink capabilities. An increase in downlink contacts becomes essential to meet these new requirements. The Federated Satellite Systems concept addresses this demand by promoting satellite collaborations to share unused downlink opportunities. These collaborations are established opportunistically and temporarily, posing multiple technology challenges to be implemented in-orbit. This work contributes to the definition of the Federation Deployment Control Protocol which formalizes a mechanism to fairly establish and manage these collaborations by employing a negotiation process between the satellites. Moreover, this manuscript presents the results of a validation campaign of this protocol with three stratospheric balloons. In summary, more than 27 federations with 63.0% of throughput were established during the field campaign. Some of these federations were used to download data to the ground, and others were established to balance data storage between balloons. These federations allowed also the extension of the coverage of a ground station with a federation that relayed data through a balloon, and the achievement of a hybrid scenario with one balloon forwarding data from a ground device. The results demonstrate that the proposed protocol is functional and ready to be embedded in a CubeSat mission., This work has been (partially) funded by “CommSensLab” Excellence Research Unit Maria de Maeztu (MINECO grant MDM-2016-0600), the Spanish Ministerio MICINN and EU ERDF project “SPOT: Sensing with pioneering opportunistic techniques” (grant RTI2018-099008-BC21/AEI/10.13039/501100011033), by the grant PID2019-106808RA-I00/AEI/FEDER/UE from the EDRF and the Spanish Government, and by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (2017 SGR 376, and 2017 SGR 219)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy consumption model of SCHC packet fragmentation over Sigfox LPWAN

  • Aguilar Romero, Sergio|||0000-0001-5808-5658
  • Platis, Antonio
  • Vidal Ferré, Rafael|||0000-0003-2217-029X
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
The Internet Engineering Task Force (IETF) has standardized a new framework, called Static Context Header Compression and fragmentation (SCHC), which offers adaptation layer functionality designed to support IPv6 over Low Power Wide Area Networks (LPWANs). The IETF is currently profiling SCHC, and in particular its packet fragmentation and reassembly functionality, for its optimal use over certain LPWAN technologies. Considering the energy constraints of LPWAN devices, it is crucial to determine the energy performance of SCHC packet transfer. In this paper, we present a current and energy consumption model of SCHC packet transfer over Sigfox, a flagship LPWAN technology. The model, which is based on real hardware measurements, allows to determine the impact of several parameters and fragment transmission strategies on the energy performance of SCHC packet transfer over Sigfox. Among other results, we have found that the lifetime of a device powered by a 2000 mAh battery, transmitting packets every 5 days, is 168 days for 2250-byte packets, while it increases to 1464 days for 77-byte packets
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Outperforming RPL with scalable routing based on meaningful MAC addressing

  • Rojas, Elisa
  • Hosseini, Hedayat
  • Gómez Montenegro, Carlos|||0000-0002-4186-8418
  • Carrascal, David
  • Rodrigues Cotrim, Jeferson
RPListhe de-facto IPv6-based routing protocol for the Internet of Things (IoT), where networks are mainly formed by sensors and other low capacity devices. However, RPL lacks scalability and is inefficient in any-to-any communications. In this article, we present IoTorii, a hierarchical protocol that creates routes based on a probe frame, instead of the computation of a distance vector, as in RPL. We implemented a proof-of-concept of IoTorii and compared it with RPL, proving lower number of table entries, decreased exchanged control messages and faster convergence time, with similar path hop count, which is particularly promising in the IoT field., This work was funded in part by grants from Comunidad de Madrid through project TAPIR-CM (S2018/TCS-4496) and project IRIS-CM (CM/JIN/2019039), by Junta de Comunidades de Castilla-La Mancha through project IRISJCCM(SBPLY/19/180501/000324), by ‘Becas de colaboración 2019-2020’ from Ministerio de Educación y FP, by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2017 SGR 376, by the European Regional Development Fund (ERDF) and the Spanish
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

FB-TCP: a 5G mmWave friendly TCP for urban deployments

  • Poorzare, Reza
  • Calveras Augé, Anna M.|||0000-0001-6371-8595
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., 5G era opens a new horizon toward communication with new features and capabilities. The new mobile generation comes up with a multi-gigabit per second data rate along with its huge available bandwidths provided by millimeter-wave frequency bands. Dispensing a fully connected world throughout low latency is the supreme aim for 5G networks. However, attaining high-speed, reliable communication is challenging in the new generation, especially in scenarios with numerous obstacles such as the urban one. As the frequency rises, the signal’s penetration power declines, which can mislead TCP in adjusting the sending rate because TCP cannot distinguish that a packet drop in a network is due to congestion or other shortcomings of the network such as blockage or random packet drops. This paper proposes a new TCP based on Fuzzy logic, which strives to prevent performance reduction in urban deployments. The Fuzzy rules are implemented in the congestion avoidance phase of the new protocol to adjust the sending rate intelligently and prevent blockage impacts. The ultimate aim of the protocol is to control the sending rate based on the current situation of the network so it can attain the highest possible performance. Moreover, it tries to reach its goal through low latency and keep the average sending rate as small as possible to restrain the buffer exhaustion. The extensive conducted simulations showed that the newly proposed protocol could attain higher performance compared to BBR, HighSpeed, Cubic, and NewReno in terms of throughput, RTT, and sending rate adjustment in the urban scenario., This work was supported in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376, and in part by the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy performance of LR-FHSS: analysis and evaluation

  • Sánchez Vital, Roger
  • Casals Ibáñez, Lluís
  • Heer Salva, Bartomeu
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
  • García Villegas, Eduard
Long-range frequency hopping spread spectrum (LR-FHSS) is a pivotal advancement in the LoRaWAN protocol that is designed to enhance the network’s capacity and robustness, particularly in densely populated environments. Although energy consumption is paramount in LoRaWANbased end devices, this is the first study in the literature, to our knowledge, that models the impact of this novel mechanism on energy consumption. In this article, we provide a comprehensive energy consumption analytical model of LR-FHSS, focusing on three critical metrics: average current consumption, battery lifetime, and energy efficiency of data transmission. The model is based on measurements performed on real hardware in a fully operational LR-FHSS network. While in our evaluation, LR-FHSS can show worse consumption figures than LoRa, we find that with optimal configuration, the battery lifetime of LR-FHSS end devices can reach 2.5 years for a 50 min notification period. For the most energy-efficient payload size, this lifespan can be extended to a theoretical maximum of up to 16 years with a one-day notification interval using a cell-coin battery., This research was funded by the Spanish Government MCIN/AEI/10.13039/501100011033 through projects PID2019-106808RA-I00 and PID2023-146378NB-I00 and by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2021 through grant SGR 00330. The first author gratefully acknowledges a predoctoral program AGAUR-FI grant (2023 FI-1 00154) Joan Oró of the Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats de la Generalitat de Catalunya and the European Fund Social Plus., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An implementation of IoT LPWAN SCHC message fragmentation and reassembly

  • Wistuba, Diego
  • Céspedes, Sandra
  • Zúñiga, Juan Carlos
  • Muñoz Lara, Rodrigo
  • Aguilar Romero, Sergio
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
This extended abstract reports about the implementation of the fragmentation and reassembly mechanisms of the SCHC framework for Low Power Wide Area Networks (LPWANs). The project aims to program the methods and routines described in the SCHC standard protocol for the fragmentation and reassembly mechanism while being independent of the LPWAN technology and remaining as an open-source project. The implementation addresses the ACK-on-Error mode, where an acknowledgement message is sent back to the sender device only when lost fragments are detected. Initial tests have been successful using a local communication setting with network sockets. We are currently porting the code to support the Sigfox LPWAN using Google Cloud Platform as a cloud computing service and the Python framework Flask for easy testing., Sergio Aguilar, Rafael Vidal and Carles Gomez were funded in part by the Spanish Government through projects TEC2016-79988-P, PID2019-106808RA-I00 (AEI/FEDER, and UE); and the Generalitat de Catalunya Grant 2017 SGR 376., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SLA-MLO: congestion-aware SLA-based scheduling of multiple links in IEEE 802.11 be

  • Kumar, Suneel
  • García Villegas, Eduard
  • Camps Mur, Daniel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., As technology advances and factories adopt the industry 4.0 paradigm, the demand for low latency and highly reliable wireless connectivity becomes more crucial than ever. To cater to these challenges multi-link operation (MLO) is a new feature introduced in IEEE 802.11be (Wi-Fi 7) that requires scheduling packets in a station across multiple Wi-Fi links. This paper proposes SLA-MLO, which is a novel MLO scheduler for industrial communications designed to manage per-flow Service Level Agreement (SLA), where an SLA is defined as a maximum allowed percentile latency. We evaluate SLA-MLO by means of NS-3 packet-level simulations and compare it against a state-of-the-art MLO mechanism that schedules packets based on instantaneous per-link congestion measurements. Our results show that SLA-MLO achieves an average reduction in SLA deviation of 50 %., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO and EU PRTR UNICO I+D number TSI-063000-2021- 15-6GSMART-EZ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Awareness information dissemination using aggregation into collective perception messages for connected vehicles

  • Marias i Parella, Jordi
  • Casademont Serra, Jordi
  • Vazquez-Gallego, Francisco
  • López Aguilera, M. Elena
In the last few years, two critical situations have arisen in the ecosystem of Intelligent Transportation Systems (ITS) related to the Vehicle-to-Everything (V2X) radio technologies, that are delaying their commercial development. One is the unclear standard to use for this radio access layer, and the other is the limited coverage range of the used frequencies in the presence of obstacles, like buildings in an urban scenario. In this paper we present an infrastructure architecture, which utilizes edge computing that receives V2X messages in varying radio technologies and optimally forwards awareness information, using CPM messages, to all vehicles regardless of their radio technology, increasing at the same time the area where these messages are received., This work was supported by the PODIUM project (101069547) funded by the European Commission, by the grants PID2019-106808RA-I00 and ONOFRE-3 PID2020-112675RB-C43 funded by MCIN/AEI/10.13039/501100011033 and INTEGRA CER-20211031 funded by CDTI Cervera., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

How sufficient is TCP when deployed in 5G mmWave networks over the urban deployment?

  • Poorzare, Reza
  • Calveras Augé, Anna M.
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., By deploying the millimeter-wave wide spectrum in 5G networks, the new generation is capable of providing high data rates with low latencies. However, these frequencies have intermittent characteristics as their downside, which acts as a hurdle on the way of attaining high performances. This disadvantage can lower signals’ penetration power in reaching far distances or passing materials such as vehicles, walls, and even human bodies. As a result, having a reliable end-to-end connection throughout 5G millimeter-wave networks can be challenging because this burden is on the transport layer mostly exploited protocol, TCP, which is unable to perform sufficiently due to the fluctuation of the high-frequency channels. This paper aims to analyze TCP’s behavior in one of the 3GPP’s well-known scenarios called urban deployment. The detailed investigation of TCP over 5G millimeter-wave when used in a city and the impact of different parameters such as remote servers, RLC buffer size, different congestion control algorithms, and maximum segment size are discussed thoroughly throughout the paper. The results revealed that TCP could benefit from the edge server deployment due to the shorter control loop, and increasing maximum segment size can also enhance this superiority. Moreover, individual TCP variants react to various RLC buffer sizes differently. However, in general, increased throughput can be attained by deploying larger buffers at the cost of latency., This work was supported in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376, and in part by the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

E-model: an analytical tool for fast adaptation of IEEE 802.11 ah RAW grouping strategies

  • Baños González, Víctor Hugo
  • López Aguilera, M. Elena
  • García Villegas, Eduard
IEEE 802.11ah is an Internet of Things enabling technology, where the efficient management of thousands of devices is a key function. To this aim, IEEE 802.11ah provides the restricted access window (RAW) mechanism, which reduces contention by enabling transmissions for small groups of stations. Optimal grouping of RAW stations requires an evaluation of many possible configurations. In this paper, we propose an analytical model (named e-model) that provides an evaluation of the RAW configuration performance, allowing a fast adaptation of RAW grouping policies, in accordance to varying channel conditions. We base the e-model in known saturation models, which we adapted to include the IEEE 802.11ah’s PHY and MAC layer modifications and to support different bitrates and packet sizes. As a proof of concept, we use the proposed model to compare the performance of different grouping strategies, showing that the e-model is a useful analysis tool in RAW-enabled scenarios. We validate the model with existing IEEE 802.11ah implementation for NS-3., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards federated satellite systems and internet of satellites: the federation deployment control protocol

  • Ruiz de Azua, Joan Adria
  • Garzaniti, Nicola
  • Golkar, Alessandro
  • Calveras Augé, Anna M.
  • Camps Carmona, Adriano José
Presently, the Earth Observation community is demanding applications that provide low latency and high downlink capabilities. An increase in downlink contacts becomes essential to meet these new requirements. The Federated Satellite Systems concept addresses this demand by promoting satellite collaborations to share unused downlink opportunities. These collaborations are established opportunistically and temporarily, posing multiple technology challenges to be implemented in-orbit. This work contributes to the definition of the Federation Deployment Control Protocol which formalizes a mechanism to fairly establish and manage these collaborations by employing a negotiation process between the satellites. Moreover, this manuscript presents the results of a validation campaign of this protocol with three stratospheric balloons. In summary, more than 27 federations with 63.0% of throughput were established during the field campaign. Some of these federations were used to download data to the ground, and others were established to balance data storage between balloons. These federations allowed also the extension of the coverage of a ground station with a federation that relayed data through a balloon, and the achievement of a hybrid scenario with one balloon forwarding data from a ground device. The results demonstrate that the proposed protocol is functional and ready to be embedded in a CubeSat mission., This work has been (partially) funded by “CommSensLab” Excellence Research Unit Maria de Maeztu (MINECO grant MDM-2016-0600), the Spanish Ministerio MICINN and EU ERDF project “SPOT: Sensing with pioneering opportunistic techniques” (grant RTI2018-099008-BC21/AEI/10.13039/501100011033), by the grant PID2019-106808RA-I00/AEI/FEDER/UE from the EDRF and the Spanish Government, and by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (2017 SGR 376, and 2017 SGR 219)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

C-SLA-MLO: enhancing SLA compliance in industrial Wi-Fi through cooperative multilink operation

  • Kumar, Suneel
  • Camps Mur, Daniel
  • García Villegas, Eduard
In the dynamic landscape of Industry 4.0, robust wireless connectivity emerges as a critical enabler for Industrial Internet of Things (IIoT) applications. With the advent of Wi-Fi 7’s multilink operation (MLO), the demand for schedulers capable of meeting diverse Service Level Agreement (SLA) requirements within industrial environments becomes paramount. Addressing this need, this paper introduces Cooperative SLA-MLO (C-SLA-MLO), a novel distributed multilink scheduler that balances data across MLO channels to fulfill the SLA of STAs operating within the same BSS. We provide a simulation-based evaluation where we compare C-SLAMLO with other benchmark approaches, in terms of SLA compliance when varying the SLA characteristics, the level of QoS, or background traffic, showcasing an average reduction of 90% in SLA deviation in the industrial use case. This study contributes practical insights for enhancing wireless connectivity in IIoT, offering potential benefits for industrial network optimization by exploiting the MLO feature brought by the new IEEE 802.11be., This work is supported by the EU’s H2020 5GSmartFact project under the MSCA, Spain grant agreement ID 956670. This work was also partly supported by the Spanish the MCIN/AEI, Spain/ 10.13039/501100011050 through project PID2019-106808RA-I00 and MINECO, Spain and EU PRTR UNICO I+D number TSI-063000-2021-15-6GSMART-EZ., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energy-efficient wireless mesh networks with IEEE 802.11ba: a new architecture

  • Sánchez Vital, Roger
  • Gómez Montenegro, Carlos
  • García Villegas, Eduard
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. DOI: 10.1109/ISCC58397.2023.10218013, In traditional IoT applications, energy saving is crucial, whereas the demand for high bandwidth is not frequent. Nonetheless, a new generation of IoT applications show a wider and varying range of requirements, where bandwidth or delay become key performance indicators to consider, which can be satisfied by technologies like Wi-Fi. However, Wi-Fi does not provide a long link range, and it exhibits a high energy consumption. To solve these issues, we propose a Wi-Fi mesh architecture where devices are equipped with a secondary, Wake-up Radio (WuR) interface, based on the new IEEE 802.11ba amendment. A WuR allows the main radio to remain in a power-saving state for long periods. Simulation results demonstrate that this architecture drastically reduces energy consumption, while keeping delay figures similar to those of traditional, single-interface approaches. To our best knowledge, this work pioneers the exploration of WuR's practicality in optimizing energy consumption in Wi-Fi-based mesh networks., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Genetic algorithm-based grouping strategy for IEEE 802.11ah networks

  • García Villegas, Eduard
  • López García, Alejandro
  • López Aguilera, M. Elena
The IEEE 802.11ah standard is intended to adapt the specifications of IEEE 802.11 to the Internet of Things (IoT) scenario. One of the main features of IEEE 802.11ah consists of the Restricted Access Window (RAW) mechanism, designed for scheduling transmissions of groups of stations within certain periods of time or windows. With an appropriate configuration, the RAW feature reduces contention and improves energy efficiency. However, the standard specification does not provide mechanisms for the optimal setting of RAW parameters. In this way, this paper presents a grouping strategy based on a genetic algorithm (GA) for IEEE 802.11ah networks operating under the RAW mechanism and considering heterogeneous stations, that is, stations using different modulation and coding schemes (MCS). We define a fitness function from the combination of the predicted system throughput and fairness, and provide the tuning of the GA parameters to obtain the best result in a short time. The paper also includes a comparison of different alternatives with regard to the stages of the GA, i.e., parent selection, crossover, and mutation methods. As a proof of concept, the proposed GA-based RAW grouping is tested on a more constrained device, a Raspberry Pi 3B+ , where the grouping method converges in around 5 s. The evaluation concludes with a comparison of the GA-based grouping strategy with other grouping approaches, thus showing that the proposed mechanism provides a good trade-off between throughput and fairness performance., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy consumption model of SCHC packet fragmentation over Sigfox LPWAN

  • Aguilar Romero, Sergio
  • Platis, Antonio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
The Internet Engineering Task Force (IETF) has standardized a new framework, called Static Context Header Compression and fragmentation (SCHC), which offers adaptation layer functionality designed to support IPv6 over Low Power Wide Area Networks (LPWANs). The IETF is currently profiling SCHC, and in particular its packet fragmentation and reassembly functionality, for its optimal use over certain LPWAN technologies. Considering the energy constraints of LPWAN devices, it is crucial to determine the energy performance of SCHC packet transfer. In this paper, we present a current and energy consumption model of SCHC packet transfer over Sigfox, a flagship LPWAN technology. The model, which is based on real hardware measurements, allows to determine the impact of several parameters and fragment transmission strategies on the energy performance of SCHC packet transfer over Sigfox. Among other results, we have found that the lifetime of a device powered by a 2000 mAh battery, transmitting packets every 5 days, is 168 days for 2250-byte packets, while it increases to 1464 days for 77-byte packets, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis and proposal of strategies for the management of drone swarms through Wi-Fi technologies

  • Betcher Sbrolla, Guido
  • López Aguilera, M. Elena
  • García Villegas, Eduard
The main purpose of this paper is to explore the benefits of combining two radio interfaces onboard an unmanned aerial vehicle (UAV) to communicate with a ground control station (GCS) and other UAVs inside a swarm. The goals are to use the IEEE 802.11ah standard (Wi-Fi HaLow) combined with the IEEE 802.11ax specification (Wi-Fi 6/6E) to enable real-time video transmission from UAVs to the GCS. While airport runway inspection serves as the proof-of-concept use case, the proposed multi-hop architectures apply to other medium-range UAV operations (i.e., a few kilometers) requiring real-time video transmission, such as natural disaster relief and agricultural monitoring. Several scenarios in which a UAV swarm performs infrastructure inspection are emulated. During the missions, UAVs have to send real-time video to the GCS through a multi-hop network when some damage in the infrastructure is found. The different scenarios are studied by means of emulation. Emulated scenarios are defined using different network architectures and radio technologies. Once the emulations finish, different performance metrics related to time, energy and the multi-hop video transmission network are analyzed. The capacity of a multi-hop network is a limiting factor for the transmission of high-quality video. As a first contribution, an expression to find this capacity from distances between UAVs in the emulated scenario is found using the NS-3 simulator. Then, this expression is applied in the algorithms in charge of composing the multi-hop network to offer on-demand quality video. However, the main contribution of this work lies in the development of efficient mechanisms for exchanging control information between UAVs and the GCS, and for forming a multi-hop network to transmit video., This research was funded in part by the Spanish MCIN/AEI/10.13039/501100011033/ FEDER/UEthrough projects PID2019-106808RA-I00 and PID2023-146378NB-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., 9 - Indústria, Innovació i Infraestructura, 7 - Energia Assequible i No Contaminant, 11 - Ciutats i Comunitats Sostenibles, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A primer on AP power save in Wi-Fi 8: overview, analysis, and open challenges

  • Sánchez Vital, Roger
  • Belogaev, Andrey
  • Gómez Montenegro, Carlos
  • Famaey, Jeroen
  • García Villegas, Eduard
Wi-Fi facilitates the Internet connectivity of billions of devices worldwide, making it an indispensable technology for modern life. Wi-Fi networks are becoming significantly denser, making energy consumption and its effects on operational costs and environmental sustainability crucial considerations. Wi-Fi has already introduced several mechanisms to enhance the energy efficiency of non-access point (non-AP) stations (STAs). However, the reduction of energy consumption of APs has never been a priority. Always-on APs operating at their highest capabilities consume significant power, which affects the energy costs of the infrastructure owner, aggravates the environmental impact, and decreases the lifetime of battery-powered APs. IEEE 802.11bn, which will be the basis of Wi-Fi 8, makes a big leap forward by introducing the AP power save (PS) framework. In this article, we describe and analyze the main proposals discussed in the IEEE 802.11bn Task Group (TGbn), such as scheduled power save, (semi-)dynamic power save, and cross-link power save. We also consider other proposals that are being discussed in TGbn, namely the integration of wake-up radios (WuRs) and STA offloading. We then showcase the potential benefits of AP PS in several scenarios, including a deployment of 470 real APs on a university campus. Our numerical analysis reveals that AP power consumption can be decreased on average by up to 28 percent, with further improvement potential. Finally, we outline the open challenges that need to be addressed to optimally integrate AP PS in Wi-Fi and ensure its compatibility with legacy devices., This research was funded in part by the Spanish MCIU/ AEI/10.13039/ 501100011033/FEDER/UE through projects PID2019106808RA-I00 and PID2023146378NB-I00, and by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. Roger SanchezVital gratefully acknowledges the predoctoral program AGAUR-FI grant (2023 FI-1 00154) Joan Oroof the Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats de la Generalitat de Catalunya and the European Social Fund Plus., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V01, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V01

  • Gómez Montenegro, Carlos
  • Calveras Augé, Anna M.
Internet Draft version 1 of CoAP over BP, The Bundle Protocol (BP) was designed to enable end-to-end communication in challenged networks. The Constrained Application Protocol (CoAP), which was designed for constrained-node networks, may be a suitable application-layer protocol for the scenarios where BP is used. This document specifies how CoAP is carried over BP., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Outperforming RPL with scalable routing based on meaningful MAC addressing

  • Rojas, Elisa
  • Hosseini, Hedayat
  • Gómez Montenegro, Carlos
  • Carrascal, David
  • Rodrigues Cotrim, Jeferson
RPListhe de-facto IPv6-based routing protocol for the Internet of Things (IoT), where networks are mainly formed by sensors and other low capacity devices. However, RPL lacks scalability and is inefficient in any-to-any communications. In this article, we present IoTorii, a hierarchical protocol that creates routes based on a probe frame, instead of the computation of a distance vector, as in RPL. We implemented a proof-of-concept of IoTorii and compared it with RPL, proving lower number of table entries, decreased exchanged control messages and faster convergence time, with similar path hop count, which is particularly promising in the IoT field., This work was funded in part by grants from Comunidad de Madrid through project TAPIR-CM (S2018/TCS-4496) and project IRIS-CM (CM/JIN/2019039), by Junta de Comunidades de Castilla-La Mancha through project IRISJCCM(SBPLY/19/180501/000324), by ‘Becas de colaboración 2019-2020’ from Ministerio de Educación y FP, by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2017 SGR 376, by the European Regional Development Fund (ERDF) and the Spanish, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

IPv6 over cross-technology communication with wake-up radio

  • Aguilar Romero, Sergio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
© 2023 Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, A variety of wireless (and wired) technologies are being used to enable Internet of Things (IoT) device connectivity. Two examples of popular technologies in some crucial IoT domains (e.g., smart home, smart factories and smart cities, among others) are IEEE 802.15.4 and IEEE 802.11. However, IoT devices supporting different wireless technologies are not interoperable without a gateway. One solution to this problem is exploiting bidirectional Cross-Technology Communication with Wake-up Radio (WuR-CTC). Nevertheless, existing WuR-CTC approaches do not support IPv6, and therefore cannot offer full Internet protocol stack interoperability. For the first time to our knowledge, in this paper, we present the design, implementation and evaluation of an adaptation layer to provide IPv6 support over WuR-CTC, by leveraging the IETF Static Context Header Compression and fragmentation (SCHC) framework. Among others, experimental results show that our solution allows transferring a 127-byte IPv6 packet from an IEEE 802.15.4 device to an IEEE 802.11 device, without a gateway, in 69 ms (in average). Therefore, the designed solution supports latency-stringent applications in smart environments, where a human in the loop expects real-time interaction between devices., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI/FSE/EU, Spain, and grant PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033, Spain, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya, Spain with the grant number 2021 SGR 00330., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing LoRa for satellite-to-Earth communications considering the impact of Ionospheric Scintillation

  • Fernández Capón, Lara Pilar
  • Ruiz De Azúa Ortega, Juan Adrián
  • Calveras Augé, Anna M.
  • Camps Carmona, Adriano José
Since the appearance of 5G, Internet of Things (IoT) has gained an increased interest, with multiple technologies emerging and converging to cover different user needs. One of the biggest challenges today is to have global IoT coverage, ensuring seamless communication with IoT devices placed in rural and even remote areas. Satellite constellations, and in particular CubeSats orbiting in Low Earth Orbit, can provide a solution to these challenges. Out of the technologies available, LoRa (Long Range) has a great potential for implementation in space-to-Earth satellite communications. As the space-to-Earth channel is different with respect to the conventional Earth-to-Earth one, it is important to asses the capabilities of LoRa in this new environment. This paper presents a study of different LoRa device configurations to identify the constrains for each one and determine which one is better for particular mission requirements. Also, the effect of ionospheric scintillation is assessed with a SDR-based (Software-Defined Radio) test set-up that evaluates the performance of this technology against with Humprey's ionospheric scintillation model. This phenomena produces deep signal intensity fadings and phase fluctuations in equatorial regions, and mainly phase fluctuations in high latitudes. The obtained metrics are the received power and the packet delivery ratio as a function of the intensity scintillation index, and show the robustness of the LoRa modulation in these new environments., This work was supported in part by the Spanish Ministry of Economy and Competitiveness, by the Spanish Ministry of Science, Innovationand Universities, Sensing with Pioneering Opportunistic Techniques, under Grant RTI2018-099008-B-C21, in part by the Unidad deExcelencia Maria de Maeztu under Grant MDM-2016-0600, in part by the European Regional Development Fund (ERDF) and the SpanishGovernment under Project PID2019-106808RA-I00 AEI/FEDER UE, and in part by the Secretaria d’Universitats i Recerca delDepartament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376 and Grant 2017 SGR 219, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing satellite non-terrestrial networks through advanced constellation management: optimizing in-orbit resources for NB-IoT

  • Singla Manau, Arnau
  • Calveras Augé, Anna M.
  • Bertoz Martínez, Francesc
  • Ruiz de Azua, Joan Adria
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a novel autonomous management system for satellite-based Non-Terrestrial Networks (NTN). It addresses the challenges of managing the operations of Low Earth Orbit (LEO) constellations for the Internet of Things (IoT), emphasizing intermittent connectivity and resource constraints. This work contributes with the description of the scheduler module alongside a customized formulation of a novel multi-objective optimization problem and its associated mathematical framework. The resultant optimization algorithm is elaborated. This Constellation Management System (CMS) is validated through a real-world scenario, revealing substantial improvements of up to 40% in task assignment and throughput rates when compared to a best-effort baseline. This study underscores the CMS’s potential to enhance IoT communication with LEO constellations through resource-efficient and business-aware satellite operations scheduling., This work was supported by the Generalitat de Catalunya; the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU; the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00; and by Departament d’Innovacio, Universitats i Empresa, Generalitat de Catalunya 2021 SGR 00330., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrating satellite and network operations for NB-IoT NTN connectivity: in-orbit test design of the Constellation Management System

  • Singla Manau, Arnau
  • Criscola, Franco
  • Canales, David
  • Fraire, Juan A.
  • Betorz Martínez, Francesc
  • Calveras Augé, Anna M.
  • Munoz-Martin, Joan Francesc
  • Guadalupi, Marco
  • Ruiz de Azua, Joan Adria
With the technological advancements in software and hardware and the cost reduction of satellite launches, there has been a surge in future planned Low Earth Orbit (LEO) constellations aimed at providing Internet of Things (IoT) services. Leveraging these constellations to extend terrestrial networks for global coverage has become a key focus, as evidenced by the standardization of Non-Terrestrial Networks (NTN) by 3GPP. However, managing operations in satellite-based NTN poses significant challenges due to the intersection of satellite operations and network management, especially in sparse constellations with intermittent connectivity. Another challenge is the need for satellite operations to adhere to standard-compliant procedures, such as those set forth by 3GPP standards. This ensures satellite services align with established industry norms, facilitating interoperability and compatibility with existing network infrastructures. A Constellation Management System (CMS) has been developed in response to these challenges. This system is an autonomous framework designed to seamlessly integrate satellite and network operations. The CMS integrates all the necessary agents and coordinates satellite and network operations in this heterogeneous scenario by providing business policy- and resource-aware task schedules. This facilitates the alignment of contact and task plans for satellites, ground station networks, and core networks, and it ultimately enables the extension of existing terrestrial networks through satellite-based NTN. This work presents a means to validate this novel approach through a dedicated CubeSat mission scheduled for the end of 2024. The final paper details the mission architecture incorporating the CMS, including interfaces and telemetry feedback mechanisms for autonomous rescheduling during the mission. Additionally, it describes the test design and procedures, along with the necessary developments for the CMS operation in space, both on the ground and in satellites. These developments encompass the required architecture for dynamic CMS operation during the mission, resource tracking, telemetry integration, and establishment of baseline operational parameters for performance evaluation. This work represents a significant step towards enhancing the capabilities of satellite-based IoT services and advancing the seamless integration of terrestrial and satellite networks on a global scale. To the authors' knowledge, this marks the first mission attempting to implement this innovative task-scheduling approach within a telecommunications satellite constellation providing NB-IoT services., This work has been funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work was funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-1-6GSatNetGS). This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. This paper is also part of the Grant 6GDIFERENTE (CER-20231018) funded by CDTI and by the European Union NextGenerationEU/PRTR within the call ”Ayudas Cervera para Centros Tecnológicos 2023., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design and validation of a dual-band circular polarization patch antenna and stripline combiner for the FSSCat mission

  • Fernández Capón, Lara Pilar
  • Muñoz Martín, Joan Francesc
  • Ruiz de Azua, Joan Adria
  • Calveras Augé, Anna M.
  • Camps Carmona, Adriano José
The FMPL-2 payload on board the 3Cat-5/A 6 Unit CubeSat, part of the FSSCat CubeSat mission, includes a dual L-Band Microwave Radiometer and a Global Navigation Satellite System Reflectometer, in one instrument, implemented in a Software Defined Radio. One of the design challenges of this payload was its Nadir looking Antenna, which had to be directive (> 12 dB), dual-band at 1400–1427 MHz and 1575.42 MHz, left-hand circularly polarized, and with important envelope restrictions, notably with a low profile. After a trade-off analysis, the best design solution appeared to be an array of six elements each of them being a stacked dual-band patch antenna, with diagonal feed to create the circular polarization, and a six to one stripline combiner. The design process of the elementary antennas first includes a theoretical analysis, to obtain the approximate dimensions. Then, by means of numerical simulations, prototyping, and adjusting the results in the simulations, the manufacturing errors and dielectric constant tolerances, to which patch antennas are very sensitive, can be characterized. A similar approach is taken with the combiner. This article includes the theoretical analysis, simulations, and prototype results, including the Flight Model assembly and characterization, This work was by the Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia, del Plan Estatal de Investigación Científica, Técnica y de Innovación 2021-2023 (Spain) and in part by the European Social Fund (ESF). It is also funded in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya 2017 SGR 376 and 2017 SGR 219. This work has also been founded by the grant PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033. Finally, this research was possible thanks to the FI-2019 grant from AGAUR-Generalitat de Catalunya, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An improvement over TCP Vegas to enhance its performance in optical burst switching networks

  • Poorzare, Reza
  • Calveras Augé, Anna M.
  • Abedidarabad, Siamak
This is a post-peer-review, pre-copyedit version of an article published in Optical review. The final authenticated version is available online at: http://dx.doi.org/10.1007/s10043-021-00652-w., The demand for high bandwidth on the Internet is growing drastically, and one of the solutions for tackling this problem is using optical networks. Burst switching is one of the techniques that can be used in optical networks to handle high traffic. Aside from the many advantages that this technique has, it suffers from a big flaw called burst contention. Optical burst switching (OBS) is a switching technique without any buffering system. As a result, when two bursts are trying to reserve one resource, one of them drops. This drawback can have a significant impact on the performance of some protocols like TCP because they have not been designed to perform in a network without any queuing system and cannot distinguish a drop is because of the congestion or contention. In this paper, a new algorithm called AVGR (Average of RTTs) is proposed based on some mathematical equations to prevent the degradation of TCP. It tries to calculate averages for some RTTs in three different periods. Then base on the obtained results, the congestion control mechanism will be modified. The primary goal of the algorithm is to determine the current status of the network and make proper decisions based on it., This work has been funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (2017 SGR 376) and the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bandwidth-Based Wake-Up Radio solution through IEEE 802.11 technology

  • López Aguilera, M. Elena
  • García Villegas, Eduard
IEEE 802.11 consists of one of the most used wireless access technologies, which can be found in almost all consumer electronics devices available. Recently, Wake-up Radio (WuR) systems have emerged as a solution for energy-efficient communications. WuR mechanisms rely on using a secondary low-power radio interface that is always in the active operation mode and is in charge of switching the primary interface, used for main data exchange, from the power-saving state to the active mode. In this paper, we present a WuR solution based on IEEE 802.11 technology employing transmissions of legacy frames by an IEEE 802.11 standard-compliant transmitter during a Transmission Opportunity (TXOP) period. Unlike other proposals available in the literature, the WuR system presented in this paper exploits the PHY characteristics of modern IEEE 802.11 radios, where different signal bandwidths can be used on a per-packet basis. The proposal is validated through the Matlab software tool, and extensive simulation results are presented in a wide variety of scenario configurations. Moreover, insights are provided on the feasibility of the WuR proposal for its implementation in real hardware. Our approach allows the transmission of complex Wake-up Radio signals (i.e., including address field and other binary data) from legacy Wi-Fi devices (from IEEE 802.11n-2009 on), avoiding hardware or even firmware modifications intended to alter standard MAC/PHY behavior, and achieving a bit rate of up to 33 kbps., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V02, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V02

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demonstrations of Direct-to-Satellite IoT for Earth observation applications: remote road traffic monitoring with imaging

  • Marín de Yzaguirre, Marcel
  • Pagès, Joan
  • Baselga Lahoz, Oscar
  • Calveras Augé, Anna M.
  • Guixé Jové, Pol
  • Ruiz De Azúa Ortega, Juan Adrián
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The escalating volume of road users and the increase on safety demands by the governmental institutions, such as the EU, highlights the need for more widespread and advanced traffic monitoring systems. Despite the emergence of traffic monitoring solutions through Earth observation techniques, persistent challenges are evident, particularly in the context of remote and rural roads. This paper presents an innovative approach, integrating ground-based imaging, in-situ Computer Vision (CV) and Direct-to-Satellite Internet of Things (DtS-IoT) for a near-real-time, cost-effective traffic monitoring solution. Focusing on current challenges, this hybrid system demonstrates to be a tailored response to the demands of remote traffic monitoring, showcasing feasibility through a proof-of-concept integrated solution., This work has been co-funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, the Generalitat de Catalunya and the European Social Fund (Joan Oro Grants to ´ hire research staff in training FI 2023), the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RAI00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with grant 2021 SGR 00330., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

CARAMEL: results on a secure architecture for connected and autonomous vehicles detecting GPS spoofing attacks

  • Vitale, Christian
  • Piperigkos, Nikos
  • Laoudias, Christos
  • Ellinas, Georgios
  • Casademont Serra, Jordi
  • Escrig, Josep
  • Kloukiniotis, Andreas
  • Lalos, Aris
  • Moustakas, Konstantinos
  • Diaz Rodriguez, Rodrigo
  • Baños, Daniel
  • Roqueta Crusats, Gemma
  • Kapsalas, Petros
  • Hofmann, Klaus Peter
  • Khodashenas, Pouria Sayyad
The main goal of the H2020-CARAMEL project is to address the cybersecurity gaps introduced by the new technological domains adopted by modern vehicles applying, among others, advanced Artificial Intelligence and Machine Learning techniques. As a result, CARAMEL enhances the protection against threats related to automated driving, smart charging of Electric Vehicles, and communication among vehicles or between vehicles and the roadside infrastructure. This work focuses on the latter and presents the CARAMEL architecture aiming at assessing the integrity of the information transmitted by vehicles, as well as at improving the security and privacy of communication for connected and autonomous driving. The proposed architecture includes: (1) multi-radio access technology capabilities, with simultaneous 802.11p and LTE-Uu support, enabled by the connectivity infrastructure; (2) a MEC platform, where, among others, algorithms for detecting attacks are implemented; (3) an intelligent On-Board Unit with anti-hacking features inside the vehicle; (4) a Public Key Infrastructure that validates in real-time the integrity of vehicle’s data transmissions. As an indicative application, the interaction between the entities of the CARAMEL architecture is showcased in case of a GPS spoofing attack scenario. Adopted attack detection techniques exploit robust in-vehicle and cooperative approaches that do not rely on encrypted GPS signals, but only on measurements available in the CARAMEL architecture., This work was supported by the European Union’s H2020 research and innovation programme under the CARAMEL project (Grant agreement No. 833611). The work of Christian Vitale, Christos Laoudias and Georgios Ellinas was also supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant 739551 (KIOS CoE) and from the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development. The work of Jordi Casademont and Pouria Sayyad Khodashenas was also supported by FEDER and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya through projects Fem IoT and SGR 2017-00376 and by the ERDF, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring the boundaries of energy-efficient Wireless Mesh Networks with IEEE 802.11ba

  • Sánchez Vital, Roger
  • Gómez Montenegro, Carlos
  • García Villegas, Eduard
In traditional IoT applications, energy saving is essential while high bandwidth is not always required. However, a new wave of IoT applications exhibit stricter requirements in terms of bandwidth and latency. Broadband technologies like Wi-Fi could meet such requirements. Nevertheless, these technologies come with limitations: high energy consumption and limited coverage range. In order to address these two shortcomings, and based on the recent IEEE 802.11ba amendment, we propose a Wi-Fi-based mesh architecture where devices are outfitted with a supplementary Wake-up Radio (WuR) interface. According to our analytical and simulation studies, this design maintains latency figures comparable to conventional single-interface networks while significantly reducing energy consumption (by up to almost two orders of magnitude). Additionally, we verify via real device measurements that battery lifetime can be increased by as much as 500% with our approach., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Packet fragmentation over Sigfox: implementation and performance evaluation of SCHC ACK-on-error

  • Aguilar Romero, Sergio
  • Wistuba La-Torre, Diego s.
  • Platis, Antonio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
  • Céspedes, Sandra
  • Zúñiga, Juan Carlos
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The Static Context Header Compression and fragmentation (SCHC) framework has been recently designed by the IETF. SCHC provides adaptation layer functionality intended to efficiently support IPv6-based and other applications over LPWAN technologies. As of the writing, technology-specific profiles are being standardized in order to describe how SCHC can be tailored when used over a given underlying technology. In this paper, we provide the first performance evaluation of SCHC over Sigfox, a flagship LPWAN technology. We focus on the main SCHC over Sigfox fragmentation mode, called ACKon-Error, which offers low overhead, reliability, and reassembly functionalities. We provide a theoretical analysis and an experimental evaluation in real environments that correspond to two geographical zones with different Sigfox radio settings: Barcelona (Spain) and Santiago (Chile). The study focuses on modeling and evaluating packet transfer times, and the required number of uplink and downlink messages. The results show that a small change in packet sizes may significantly affect the transfer times, especially when no duty-cycle restrictions are enforced. Also, we observe that, under certain conditions, an increase in the fragment loss rate may decrease the packet transfer time, and that the number of uplink and downlink messages is not proportional to such increase due to the fact that downlink messages are device-driven. The results provide useful insights for researchers, developers, implementers, and providers, with applicability to the application design, network planning, and resource management of IoT solutions., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI / FSE / EU, and and grant PID2019-106808RA-I00 funded by MCIN / AEI / 10.13039/501100011033. This work was also supported by ANID Chile Project FONDECYT Regular 1201893, FONDEF/CONICYT 2019 Folio ID19I10363, and ANID Basal Project FB0008. (Corresponding author: Sergio Aguilar.), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrating satellite constellation and mobile operations for non-terrestrial networks: preliminary results of dynamic scheduling

  • Singla Manau, Arnau
  • Criscola, Franco
  • Canales, David
  • Calveras Augé, Anna M.
  • Fraire, Juan
  • Ruiz de Azua, Joan Adria
The integration of terrestrial networks with Non-Terrestrial Networks requires a comprehensive management framework to address the mutual impact between satellite operations and network services. Past research by the authors introduced the Constellation Management System (CMS) as a solution, facilitating optimized plans for both satellite and network operators. This paper extends prior work by focusing on enhancing the adaptability of the CMS through dynamic execution methodologies, particularly by integrating telemetry feedback. The study presents a dynamic execution framework and a sequence diagram outlining the rescheduling process. Validation through telemetry emulation demonstrates the system’s agility in responding to telemetry variations and the value of this new architecture using the CMS dynamically. Initial findings indicate a throughput enhancement of 10% with the implementation of a closed-loop approach compared to an open-loop approach. This research advances satellite constellation operations management towards automated communications, enhancing adaptability and robustness in unpredictable and constantly changing environments., This work has been funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia. Additionally, this work was funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021- 1-6GSatNet-GS). This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. This paper is also part of the Grant 6G-DIFERENTE (CER-20231018) funded by CDTI and by the European Union NextGenerationEU/PRTR within the call ”Ayudas Cervera para Centros Tecnologicos 2023. The research was partially ´ supported by the Embry-Riddle Aeronautical University Faculty Research Development Program and GAANN fellowship., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Deep learning TCP for mitigating NLoS impairments in 5G mmWave

  • Poorzare, Reza
  • Calveras Augé, Anna M.
5G and beyond 5G are revolutionizing cellular and ubiquitous networks with new features and capabilities. The new millimeter-wave frequency band can provide high data rates for the new generations of mobile networks but suffers from NLoS caused by obstacles, which causes packet drops that mislead TCP because the protocol interprets all drops as an indication of network congestion. The principal flaw of TCP in such networks is that the root for packet drops is not distinguishable for TCP, and the protocol takes it for granted that all losses are due to congestion. This paper presents a new TCP based on deep learning that can outperform other common TCPs in terms of throughput, RTT, and congestion window fluctuation. The primary contribution of deep learning is providing the ability to distinguish various conditions in the network. The simulation results revealed that the proposed protocol could outperform conventional TCPs such as Cubic, NewReno, Highspeed, and BBR., This research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00", and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Preparing Wi-Fi 7 for healthcare Internet-of-Things, Posant a punt el Wi-Fi 7 per a la Internet de les Coses (IoT) en aplicacions de salut, Poniendo a punto Wi-Fi 7 para la Internet de las Cosas (IoT) en aplicaciones de salud

  • Qadri, Yazdan Ahmad
  • Nain, Zulqar
  • Nauman, Ali
  • Musaddiq, Arslan
  • García Villegas, Eduard
  • Kim, Sung Won
The healthcare Internet of Things (H-IoT) is an interconnection of devices capable of sensing and transmitting information that conveys the status of an individual’s health. The continuous monitoring of an individual’s health for disease diagnosis and early detection is an important application of H-IoT. Ambient-assisted living (AAL) entails monitoring a patient’s health to ensure their well-being. However, ensuring a limit on transmission delays is an essential requirement of such monitoring systems. The uplink (UL) transmission during the orthogonal frequency division multiple access (OFDMA) in the wireless local area networks (WLANs) can incur a delay which may not be acceptable for delay-sensitive applications such as H-IoT due to their random nature. Therefore, we propose a UL OFDMA scheduler for the next Wireless Fidelity (Wi-Fi) standard, the IEEE 802.11be, that is compliant with the latency requirements for healthcare applications. The scheduler allocates the channel resources for UL transmission taking into consideration the traffic class or access category. The results demonstrate that the proposed scheduler can achieve the required latency for H-IoT applications. Additionally, the performance in terms of fairness and throughput is also superior to state-of-the-art schedulers., This research was supported in part by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education (NRF-2021R1A6A1A03039493), in part by the NRF grant funded by the Korea government (MSIT) (NRF-2022R1A2C1004401), and in part by Spanish MCIN/AEI/10.13039/501100011033 through project PID2019-106808RA-I00., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demo: interoperability between cellular and V2X networks (802.11p / LTE-PC5) under a Cloud Native Edge Scenario

  • Marias i Parella, Jordi
  • Pino, Adrián
  • Cordero, Bruno
  • Casademont Serra, Jordi
  • Carmona Cejudo, Estela
  • Vazquez-Gallego, Francisco
By leveraging the use of wireless communication technologies and edge computing capabilities, Cooperative Intelligent Transport Systems (C-ITS) aim to improve safety and traffic management in mobility use cases. However, the deployment of C-ITS poses some critical challenges. Specifically, in heterogeneous systems, it is necessary to guarantee interoperability among the various available wireless technologies. This paper presents a cloud native infrastructure architecture for vehicular communications that guarantees the interoperability between cellular technologies (4G/5G), and specific Vehicle-to-Everything (V2X) communication technologies, such as LTE-PC5 and IEEE 802.11p wireless communications standards. Such interoperability is demonstrated through the implementation of an Edge Infrastructure where a vehicle equipped with one of the aforementioned radio access technologies, sends cooperative awareness messages, and such messages are received in vehicles provisioned with different wireless technologies., This work was supported by the grants ONOFRE-3 PID2020-112675RB-C43 and PID2019-106808RA-I00 funded by MCIN/AEI/10.13039/501100011033, INTEGRA CER20211031 funded by CDTI Cervera, the PODIUM project (101069547) funded by the European Commission, and the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 951947 (5GMED). The authors would also like to acknowledge CERCA Programme Generalitat de Catalunya for sponsoring part of this work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data transmission in store and forward based Non-Terrestrial Networks for IoT use cases

  • Kellermann, Timo Nicolas
  • Pueyo Centelles, Roger
  • Calveras Augé, Anna M.
Non-Terrestrial Networks (NTNs) are critical enablers of beyond 5G and 6G connectivity, particularly for expanding the reach of massive Machine-Type Communications (mMTC) in the Internet of Things (IoT) domain. Narrowband-IoT (NB-IoT) is a leading protocol for these use cases, and its integration with NTNs offers the potential to provide connectivity in remote or underserved areas via satellite-based communication. However, NTNs introduce several challenges, particularly in the context of paging and data transmission, due to the inherent discontinuities in coverage caused by satellite movement and the non-concurrent operation of feeder and service links. This paper presents a novel design of an architecture for NTNs that effectively addresses the challenges of paging and data transmission in LEO satellite constellations operating in store and forward mode. The focus is to minimize delays and maximizing paging success rates. We evaluate the architecture through simulation of a Low Earth Orbit (LEO) satellite constellation, exploring key performance metrics such as end-to-end transmission delay and the impact of accurate UE location information on paging efficiency. The results demonstrate the architecture’s ability to significantly reduce delays using dynamic forwarding strategies based on predicted satellite contact windows, making it a viable solution for future NTN-based IoT deployments., This work was supported and funded by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union– NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-1-6GSatNet-GS). and by the European Union’s Horizon Europe under Grant Agreement no. 101096526 (ETHER). Furthermore, this research was funded in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, PID2023-146378NB-I00 and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The SF12 well in LoRaWAN: problem and end-device-based solutions

  • Casals Ibáñez, Lluís
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
© 2021 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), LoRaWAN has become a popular technology for the Internet of Things (IoT) device connectivity. One of the expected properties of LoRaWAN is high network scalability. However, LoRaWAN network performance may be compromised when even a relatively small number of devices use link-layer reliability. After failed frame delivery, such devices typically tend to reduce their physical layer bit rate by increasing their spreading factor (SF). This reaction increases channel utilization, which may further degrade network performance, even into congestion collapse. When this problem arises, all the devices performing reliable frame transmission end up using SF12 (i.e., the highest SF in LoRaWAN). In this paper, we identify and characterize the described network condition, which we call the SF12 Well, in a range of scenarios and by means of extensive simulations. The results show that by using alternative SF-management techniques it is possible to avoid the problem, while achieving a packet delivery ratio increase of up to a factor of 4.7., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A QoS harmonization strategy for Wi-Fi and cellular networks convergence

  • Jain, Akshay
  • Garcia, Daniel
  • Darroudi, Seyed Mahdi
  • López Aguilera, M. Elena
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Beyond 5G networks will not only present an evolution of the current 5G standards, but they will also provision a path for increased convergence with other Radio Access Technologies (RATs). The Wi-Fi Alliance and 3GPP through their standards releases have presented a lucrative inter-working opportunity for the same. Such a convergence will help to enhance the Quality of Experience (QoE) for the users. However, one of the most important challenge towards a more converged scenario is the provision of uniform Quality of Service (QoS) across cellular and Wi-Fi RATs. Hence in this paper, to the best of our knowledge, we propose the first attempt in literature to homogenize Wi-Fi and 5G QoS. Specifically, a method is presented to map Wi-Fi QoS parameters to 5G QoS Identifiers (5QI). The presented results, which show a clear possibility of the 5G and Wi-Fi QoS harmonization, have been obtained via a real testbed setup., This research was funded in part by the Spanish MCIN/AEI/10.13039/501100011033 through PID2019-106808RA-I00., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Novel architecture for cellular IoT in future non-terrestrial networks: store and forward adaptations for enabling discontinuous feeder link operation

  • Kellermann, Timo Nicolas
  • Pueyo Centelles, Roger
  • Camps-Mur, Daniel
  • Ferrús Ferré, Ramón Antonio
  • Guadalupi, Marco
  • Calveras Augé, Anna M.
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Internet of Things (IoT) paradigm has already progressed from an emerging technology to an incredibly fast-growing field. Defined as one of the three key services in 5th Generation (5G), massive Machine Type Communications (mMTC) are intended to enable the wide-spread adoption of IoT services across the globe. Satellite-based Non-Terrestrial Networks (NTN) are crucial in providing connectivity with global coverage including rural and offshore areas, which are fundamental for supporting important use cases in future networks. A rapidly growing market for IoT devices with mMTC applications using NarrowBandIoT (NB-IoT) will represent a large share of user equipment (UE) in such areas. While standardization efforts for NTN are underway for forthcoming 3GPP releases, they focus on transparent payload architectures where the satellite platform is necessarily connected to a ground station gateway to be able to provide satellite access services to IoT devices, thus requiring complex ground segment infrastructure in low Earth orbit (LEO) constellation deployments to achieve global coverage. In contrast, satellite network deployments targeting the delivery of delay-tolerant IoT applications using NB-IoT, which are a major mMTC use case, can benefit from architectures based on the use of regenerative payloads in the satellite and support for Store and Forward (S&F) operation where satellite access can remain operational even at times when the satellite is not connected to a ground station. In particular, such an approach would allow for extending satellite service coverage in areas where satellites cannot be connected to ground stations (e.g. maritime or very remote areas with lack of ground-stations infrastructures), improving ground segment affordability by enabling operation with fewer ground-stations and allowing more robust operation of the satellite under intermittent feeder link operation. In this paper, we provide a high-level design of an extended 3GPP architecture featuring store and forward mechanisms for IoT NTN delay-tolerant applications that address the previous challenges, as well as a laboratory validation of said architecture for a specific use case., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V03, Constrained Application Protocol (CoAP) over Bundle Protocol (BP). V03

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Demonstration of Direct-to-Satellite IoT for monitoring water reservoirs in remote areas to prevent wildfires

  • Marín de Yzaguirre, Marcel
  • Baselga Lahoz, Oscar
  • Pagès, Joan
  • Calveras Augé, Anna M.
  • Guixé Jové, Pol
  • Ruiz De Azúa Ortega, Juan Adrián
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Non-Terrestrial Networks are three-dimension net-works composed of aircraft and spacecraft nodes that extend the services provided by terrestrial infrastructure. This kind of network plays a key role in the deployment of Internet of Things (IoT) connectivity in remote areas, which are more probable to currently lack it. Among the different alternatives, the usage of satellite systems to conform these new networks that provides IoT connectivity has emerged as a promising solution. In this scenario, IoT devices directly interacts with satellites with Low-Power Wide Area Network technologies. This approach is defined in the literature as a Direct-to-Satellite IoT (DtS-IoT) architecture. This work contributes to the DtS-IoT concept by presenting an experimental deployment following this architecture. Specifically, a dedicated sensor that monitors water reservoirs located in remote areas are installed. The sensor collects the status of the reservoirs and uploads it to the satellite. This application becomes essential for the maintenance of the firefighter infrastructure, which typically is located in the mountains. This work presents thus the architecture design, the sensor setup, and discusses the achieved results of an in-field campaign. These results demon-strate the feasibility of this deployment with current technologies, and promotes its deployment in future projects., This work was co-funded by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, by the Generalitat de Catalunya and the European Social Fund (Joan Oro´ Grants to hire research staff in training FI 2023), and by the Spanish MCINAEI 10.13039501100011033 through project PID2019-106808RA-I00, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330. Additionally, the authors would like to acknowledge the inkind support of Departament d’Interior of the Government of Catalonia., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A testbed for a nearby-context aware: threat detection and mitigation system for connected vehicles

  • Martín Pérez, Miguel
  • Marias i Parella, Jordi
  • Fernández Hidalgo, Javier
  • de Juan Fidalgo, Pablo
  • Casademont Serra, Jordi
  • Álvarez Romero, Antonio
  • Díaz Rodríguez, Rodrigo
The fact than more and more Cyber-Physical or IoT systems are integrated in vehicle fleets, coupled with the growing connectivity of these devices, poses a higher risk of cyber attacks, due to the increased attack surface. To mitigate this problem, we propose and test a collaborative system of Security Information and Event Management (SIEM) systems, where each node has its own autonomous SIEM—allowing the execution of mitigation actions even when the node is isolated—but it shares its context information with the nearby nodes, improving the correlation intelligence to make better informed decisions. The SIEMs are organised in a hierarchy, following the architecture of the monitoring system, where higher SIEMs collect events and alarms from lower SIEMs to make more general decisions and raise alarms. These alarms are forwarded to lower SIEMs to mitigate or prevent attacks on other nodes in the system. This system has been implemented as part of the CPSoSaware project and tested in three scenarios: local, area and global, focusing the demonstrations on the different layers of the project architecture., This work was supported by European Union’s Horizon 2020 program under grant No 871738 (CPSoSaware), by MCIN/AEI/10.13039/501100011033 under grants PID2019- 106808RA-I00 and ONOFRE-3 PID2020-112675RB-C43 and by CDTI Cervera under grant INTEGRA CER-20211031., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the energy performance of iridium satellite IoT technology

  • Gómez Montenegro, Carlos
  • Darroudi, Seyed Mahdi
  • Naranjo Silva, Héctor Sebastián
  • Paradells, Josep
Most Internet of Things (IoT) communication technologies rely on terrestrial network infrastructure. When such infrastructure is not available or does not provide sufficient coverage, satellite communication offers an alternative IoT connectivity solution. Satellite-enabled IoT devices are typically powered by a limited energy source. However, as of this writing, and to our best knowledge, the energy performance of satellite IoT technology has not been investigated. In this paper, we model and evaluate the energy performance of Iridium satellite technology for IoT devices. Our work is based on real hardware measurements. We provide average current consumption, device lifetime, and energy cost of data delivery results as a function of different parameters. Results show, among others, that an Iridium-enabled IoT device, running on a 2400 mAh battery and sending a 100-byte message every 100 min, may achieve a lifetime of 0.95 years. However, Iridium device energy performance decreases significantly with message rate., This work was supported in part by the Spanish Government through project PID2019- 106808RA-I00, AEI/FEDER, EU, and by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya through project 2017 SGR 376., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrating geographical information systems in management and orchestration of satellites constellation to achieve a spatial-aware 6G Non-Terrestrial Networks architecture

  • Ávila Acosta, José Luis
  • Calveras Augé, Anna M.
  • Ruiz-de-Azua, Joan
  • Rouzegar, Hossein
  • Figuerola, Sergi
5G networks are expanding rapidly, driven by cloud technologies such as Network Function Virtualization (NFV) and orchestrated through Management And Orchestration (MANO) Systems. Despite this fast grow, the goal of providing global coverage and serving remote areas remains. Non-Terrestrial Networks (NTN), leveraging on satellite constellations, emerge as a transformative solution for 6G, providing seamless and global connectivity. Utilizing virtualization technologies, these satellite constellations can form cooperative clusters and function as distributed data centers in space, able to deploy ubiquitous virtualized based applications. Nevertheless, the dynamic nature and geographical spread of these networks present unique challenges. Traditional MANO systems, designed for terrestrial infrastructures, struggle to address the inherent mobility of satellite nodes and service deployment based in target areas (geographical deployment). The main contribution of this work is the proposal of the integration of Geographic Information Systems (GIS) into 6G satellite network management through MANO systems. By harnessing the power of spatial data capture, analysis, and visualization, GIS optimizes resource distribution across the satellite cluster based on location and future network topology prediction. This system can also be used to allow operators to understand coverage patterns and define the geographical boundaries of services offered by satellites in constant movement. To address these challenges, this work presents a development of a GIS extension for ETSI MANO architecture. This plugin enhances the MANO systems by enabling dynamic scaling, which adjusts resource allocation based on satellite movement and projected position. Additionally, it facilitates seamless migration, which ensures service continuity during satellite handovers, thereby guaranteeing uninterrupted connectivity. Furthermore, an experimental testbed validates the proposed architecture and its performance in various scenarios, ranging from single satellites to highly interconnected constellations. This research demonstrates the importance of GIS in spatially informed network function virtualization for NTNs, and prove the importance of GIS in managing satellite clusters through MANO systems. The incorporation of GIS technology in this research facilitates the provision of spatially aware services on satellite clusters. This research presents crucial findings on the performance of GIS-enabled MANO systems for enhancing network planning and operational efficiency in the context of 5G and beyond, particularly in NTNs., This work is co-funded by the Spanish MCIN/AEI/ 10.13039/501100011033 through projects PID2019106808RA-I00, PID2023-146378NB-I00 and by Secretaria d'Universitats i Recerca del departament d'Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330, by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union – NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-16GSatNet-GS), ETHER project by the EU’s Horizon Europe program (GA Nº 101096526), by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Understanding the impact of packet size on the energy efficiency of LoRaWAN

  • Casals Ibáñez, Lluís
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
LoRaWAN has become a flagship LPWAN technology, and one of the main connectivity alternatives for IoT devices. Since LoRaWAN was designed for low energy consumption, it is fundamental to understand its energy performance. In this paper, we study the impact of packet size on LoRaWAN device energy consumption per delivered data bit (EPB). By means of extensive simulations, we show that, when network performance is very high or very low, EPB decreases steadily with packet size; otherwise, EPB may show an “asymmetric U” shape as a function of packet size, with a minimum EPB value that is achieved for a medium packet size. We also provide detailed insights on the reasons that produce the observed behaviors., This work was supported in part by the Spanish Government through project TEC2016-79988-P funded by AEI/FSE/EU, grant PID2019-106808RAI00 funded by MCIN/AEI/10.13039/501100011033, and by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of receiver-feedback techniques for fragmentation over LPWANs

  • Aguilar Romero, Sergio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The Internet Engineering Task Force (IETF) has standardized a new framework for IPv6 support over Low Power Wide Area Networks (LPWANs), called Static Context Header Compression and Fragmentation (SCHC). SCHC includes acknowledgment (ACK)-based mechanisms for reliable fragmented packet transmission. For the latter, SCHC defines a Receiver-Feedback Technique (RFT), called Compressed Bitmap (CB), by which a receiver reports to the sender whether the fragments carrying a packet have been received or not. Such information is carried as ACK payload. Considering the extraordinary frame size and message rate constraints of LPWANs, ACK payload size becomes crucial. In this paper, we compare the performance of CB with that of several alternative RFTs, namely List of Lost Fragments (LLF), List of Deltas (LoD), and Uncompressed Bitmap (UB), where the latter is used as a benchmark. We evaluate the considered RFTs in terms of ACK size, number of Layer 2 (L2) frames needed to carry an ACK, and ACK Time on Air. Our analysis shows that the use of RFTs different from CB offers significant performance improvement in many scenarios. Furthermore, we provide guidance on which RFT should be used for different packet sizes, error rates and error patterns., This research is funded in part by the ERDF and the Spanish Government through project TEC2016-79988-P and project PID2019-106808RA-I00, AEI/FEDER, EU., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A comprehensive solution for securing connected and autonomous vehicles

  • Kamal, Mohsin
  • Kyrkou, Christos
  • Piperigkos, Nikos
  • Papandreou, Andreas
  • Kloukiniotis, Andreas
  • Casademont Serra, Jordi
  • Porras, Natalia
  • Baños, Daniel
  • Diaz, Rodrigo
  • Durante, Nicola Gregorio
  • Hofmann, Klaus Peter
  • Kapsalas, Petros
  • Lalos, Aris
  • Moustakas, Konstantinos
  • Laoudias, Christos
  • Theocharides, Theocharides
  • Ellinas, Georgios
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., With the advent of Connected and Autonomous Vehicles (CAVs) comes the very real risk that these vehicles will be exposed to cyber-attacks by exploiting various vulnerabilities. This paper gives a technical overview of the H2020 CARAMEL project (currently in the intermediate stage) in which Artificial Intelligent (AI)-based cybersecurity for CAVs is the main goal. Most of the possible scenarios are considered, by which an adversary can generate attacks on CAVs, such as attacks on camera sensors, GPS location, Vehicle to Everything (V2X) message transmission, the vehicle’s On-Board Unit (OBU), etc. The counter-measures to these attacks and vulnerabilities are presented via the current results in the CARAMEL project achieved by implementing the designed security algorithms., This work was supported by the European Union’s H2020 research and innovation programme under the CARAMEL project (Grant agreement No 833611). The work of M.K., C.K., C.L., T.T., and G.E. has also been supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 739551 (KIOS CoE- TEAMING) and from the Republic of Cyprus through the Deputy Ministry of Research, Innovation and Digital Policy. The work of J.C. has also been supported by grants PID2019-106808RA-I00 and PID2020-112675RB funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

FB-TCP: a 5G mmWave friendly TCP for urban deployments

  • Poorzare, Reza
  • Calveras Augé, Anna M.
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., 5G era opens a new horizon toward communication with new features and capabilities. The new mobile generation comes up with a multi-gigabit per second data rate along with its huge available bandwidths provided by millimeter-wave frequency bands. Dispensing a fully connected world throughout low latency is the supreme aim for 5G networks. However, attaining high-speed, reliable communication is challenging in the new generation, especially in scenarios with numerous obstacles such as the urban one. As the frequency rises, the signal’s penetration power declines, which can mislead TCP in adjusting the sending rate because TCP cannot distinguish that a packet drop in a network is due to congestion or other shortcomings of the network such as blockage or random packet drops. This paper proposes a new TCP based on Fuzzy logic, which strives to prevent performance reduction in urban deployments. The Fuzzy rules are implemented in the congestion avoidance phase of the new protocol to adjust the sending rate intelligently and prevent blockage impacts. The ultimate aim of the protocol is to control the sending rate based on the current situation of the network so it can attain the highest possible performance. Moreover, it tries to reach its goal through low latency and keep the average sending rate as small as possible to restrain the buffer exhaustion. The extensive conducted simulations showed that the newly proposed protocol could attain higher performance compared to BBR, HighSpeed, Cubic, and NewReno in terms of throughput, RTT, and sending rate adjustment in the urban scenario., This work was supported in part by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya under Grant 2017 SGR 376, and in part by the Spanish Government under Project PID2019-106808RA-I00 AEI/FEDER UE., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Perspective on the impact of the massiveness of mega-constellations on diverse ecosystems

  • Baselga Lahoz, Oscar
  • Calveras Augé, Anna M.
  • Ruiz-de-Azua, Joan
From the irruption of the New Space paradigm, a multitude of disruptive initiatives and cutting-edge technologies emerged in the space sector, resulting in the creation of new vertical domains. In recent years, satellite systems have been envisaged for communications to provide ubiquitous, global, and broadband services. However, the demanding requirements can only be met by large Low Earth Orbit satellite constellations (i.e., mega-constellations). This industry of massive space-based networks, currently led by SpaceX, is converging with the 3GPP Non-Terrestrial Networks market due to their common trend. For this purpose, satellite operators are partnering with Mobile Network Operators to access their 3GPP-compliant frequency spectrum and implement Direct-to-Handset technologies. Nevertheless, mega-constellations pose major problems to multiple global ecosystems. This paper delves into the economic, governance, sustainability, astronomical, and coexistence issues arising from the mega-constellation industry and offers a new perspective on how the space ecosystem should evolve to avoid collapse., This work has been co-funded by the Generalitat de Catalunya and the European Social Fund (Joan Or´ o Grants to hire research staff in training FI 2023, no. 2023 FI-1 00861), by the Spanish Ministry of Economic Affairs and Digital Transformation and the European Union– NextGeneration EU, in the framework of the Recovery Plan, Transformation and Resilience (PRTR) (Call UNICO I+D 5G 2021, ref. number TSI-063000-2021-8-6GSatNet-SeS), by the Government of Catalonia in the scope of the NewSpace Strategy for Catalonia, by the Grant 6G-DIFERENTE (CER-20231018) funded by CDTI, by the European Union NextGenerationEU/PRTR within the call, in part by the Spanish MCIN/AEI/ 10.13039/501100011033 through project PID2019-106808RA-I00, by Secretaria d’Universitats i Recerca del departament d’Empresa i Coneixement de la Generalitat de Catalunya with the grant number 2021 SGR 00330 and by the European Union’s Horizon Europe under Grant Agreement no. 101096526 (ETHER)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Wake-up radio: an enabler of wireless convergence

  • Cervià Caballé, Martí
  • Calveras Augé, Anna M.
  • Paradells Aspas, Josep
Nowadays, several wireless communication solutions targeted at low-power devices (e.g. sensors, actuators) compete for market dominance. As a consequence, the deployment of the Internet of Things is slowed by fragmentation. However, Cross-Technology Communication (CTC) has appeared as a solution capable of bridging the compatibility gap between non-interoperable devices. In this way, we propose using Wake-up Radio (WuR) to achieve high rate bidirectional CTC, introducing WuR assisted CTC (WuR-CTC). Although WuR was originally proposed to reduce radio power consumption, it provides a secondary communications channel that can be used for high-speed and bidirectional CTC. With WuRCTC, we demonstrate that WuR can lead to interoperability between non-compatible wireless devices, therefore, providing a compelling reason for the harmonization of the nascent WuR specifications. This article presents a WuR-CTC solution implemented on an heterogeneous testbed with IEEE 802.11 and IEEE 802.15.4 devices. The resulting testbed achieves reliable CTC with an effective throughput of 26.7 kbps. Moreover, the addition of WuR to the testbed devices provides energy savings, and, in a clear advantage over traditional duty-cycled solutions, allows devices to asynchronously maintain communications., Postprint (published version)
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Outperforming RPL with scalable routing based on meaningful MAC addressing

  • Rojas Sánchez, Elisa|||0000-0002-6385-2628
  • Hosseini, Hedayat
  • Gómez, Carles
  • Carrascal Acebron, David|||0000-0002-6982-9365
  • Rodrigues Cotrim, Jeferson
RPL is the de-facto IPv6-based routing protocol for the Internet of Things (IoT), where networks are mainly formed by sensors and other low capacity devices. However, RPL lacks scalability and is inefficient in any-to-any communications. In this article, we present IoTorii, a hierarchical protocol that creates routes based on a probe frame, instead of the computation of a distance vector, as in RPL. We implemented a proof-of-concept of IoTorii and compared it with RPL, proving lower number of table entries, decreased exchanged control messages and faster convergence time, with similar path hop count, which is particularly promising in the IoT field., Comunidad de Madrid, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, Agencia Estatal de Investigación, Generalitat de Catalunya