Pasar al contenido principal

SOLUCION UNIFICADA PARA CONSTRUIR REDES DE SENSORES INALAMBRICAS

TEC2016-79988-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An implementation of IoT LPWAN SCHC message fragmentation and reassembly

  • Wistuba, Diego
  • Céspedes, Sandra
  • Zúñiga, Juan Carlos
  • Muñoz Lara, Rodrigo
  • Aguilar Romero, Sergio
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
This extended abstract reports about the implementation of the fragmentation and reassembly mechanisms of the SCHC framework for Low Power Wide Area Networks (LPWANs). The project aims to program the methods and routines described in the SCHC standard protocol for the fragmentation and reassembly mechanism while being independent of the LPWAN technology and remaining as an open-source project. The implementation addresses the ACK-on-Error mode, where an acknowledgement message is sent back to the sender device only when lost fragments are detected. Initial tests have been successful using a local communication setting with network sockets. We are currently porting the code to support the Sigfox LPWAN using Google Cloud Platform as a cloud computing service and the Python framework Flask for easy testing., Sergio Aguilar, Rafael Vidal and Carles Gomez were funded in part by the Spanish Government through projects TEC2016-79988-P, PID2019-106808RA-I00 (AEI/FEDER, and UE); and the Generalitat de Catalunya Grant 2017 SGR 376., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Wake-up radio systems for cooperative-intelligent transport systems architecture

  • Casademont Serra, Jordi
  • López Aguilera, M. Elena
  • Paradells, Josep
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Cooperative-Intelligent Transport systems are new applications developed on top of communications between vehicles and between vehicles and fixed infrastructure. Their architecture envisages devices deployed along the routes and streets, transmitting and receiving different kind of messages belonging to different services. Quite often, these devices will be located in isolated places with very low number of vehicles passing nearby. Being in isolated places, these devices will require to be feed with rechargeable batteries and alternative power sources, the usage of which need to be very efficient. The fact of continuously transmitting messages whenever there is no vehicle to receive them demands a solution. In this paper, we propose to use a well-known saving power strategy already used in Internet of Things, the Wake-up Radio systems. As vehicular communications are based on IEEE 802.11 standard, we propose to use a Wake-up Radio system based on this standard as well, being thus no additional hardware needed for the wake-up transmitter. The paper analyses the feasibility of using this solution on several vehicular applications., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

IEEE 802.11-Enabled Wake-Up Radio: use cases and applications

  • López Aguilera, M. Elena
  • Demirkol, Ilker Seyfettin
  • García Villegas, Eduard
  • Paradells Aspas, Josep
IEEE 802.11 is one of the most commonly used radio access technologies, being present in almost all handheld devices with networking capabilities. However, its energy-hungry communication modes are a challenge for the increased battery lifetime of such devices and are an obstacle for its use in battery-constrained devices such as the ones defined by many Internet of Things applications. Wake-up Radio (WuR) systems have appeared as a solution for increasing the energy efficiency of communication technologies by employing a secondary low-power radio interface, which is always in the active state and switches the primary transceiver (used for main data communication) from the energy-saving to the active operation mode. The high market penetration of IEEE 802.11 technology, together with the benefits that WuR systems can bring to this widespread technology, motivates this article’s focus on IEEE 802.11-basedWuR solutions. More specifically, we elaborate on the feasibility of such IEEE 802.11-based WuR solutions, and introduce the latest standardization efforts in this IEEE 802.11-based WuR domain, IEEE 802.11ba, which is a forthcoming IEEE 802.11 amendment, discussing its main features and potential use cases. As a use case consisting of green Wi-Fi application, we provide a proof-of-concept smart plug system implemented by a WuR that is activated remotely using IEEE 802.11 devices, evaluate its monetary and energy savings, and compare it with commercially available smart plug solutions. Finally, we discuss novel applications beyond the wake-up functionality that IEEE 802.11-enabled WuR devices can offer using a secondary radio, as well as applications that have not yet been considered by IEEE 802.11ba. As a result, we argue that the IEEE 802.11-based WuR solution will support a wide range of devices and deployments, for both low-rate and low-power communications, as well as high-rate transmissions., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

E-model: an analytical tool for fast adaptation of IEEE 802.11 ah RAW grouping strategies

  • Baños González, Víctor Hugo
  • López Aguilera, M. Elena
  • García Villegas, Eduard
IEEE 802.11ah is an Internet of Things enabling technology, where the efficient management of thousands of devices is a key function. To this aim, IEEE 802.11ah provides the restricted access window (RAW) mechanism, which reduces contention by enabling transmissions for small groups of stations. Optimal grouping of RAW stations requires an evaluation of many possible configurations. In this paper, we propose an analytical model (named e-model) that provides an evaluation of the RAW configuration performance, allowing a fast adaptation of RAW grouping policies, in accordance to varying channel conditions. We base the e-model in known saturation models, which we adapted to include the IEEE 802.11ah’s PHY and MAC layer modifications and to support different bitrates and packet sizes. As a proof of concept, we use the proposed model to compare the performance of different grouping strategies, showing that the e-model is a useful analysis tool in RAW-enabled scenarios. We validate the model with existing IEEE 802.11ah implementation for NS-3., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

IPv6 over LPWANs: connecting Low Power Wide Area Networks to the Internet (of Things)

  • Gómez Montenegro, Carlos
  • Minaburo, Ana
  • Toutain, Laurent
  • Barthel, Dominique
  • Zúñiga, Juan Carlos
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., LPWANs have recently emerged as a promising solution for enabling industrial IoT applications. To fully exploit their potential, LPWANs need to be connected to the Internet. However, the severe capacity constraints of LPWAN technologies challenge IPv6 support, and even 6LoWPAN-based adaptations are not sufficient. In this paper, we present SCHC, an ultralightweight IPv6 adaptation layer designed for LPWANs, which is being standardized by the IETF., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Performance analysis and optimal tuning of IETF LPWAN SCHC ACK-on-Error Mode

  • Aguilar Romero, Sergio
  • Maillé, patrick
  • Toutain, Laurent
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
  • montavont, nicolas
  • Papadopoulos, Georgios Z.
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The Internet Engineering Task Force (IETF) Low Power Wide Area Network (LPWAN) Working Group has developed the Static Context Header Compression (SCHC) framework to enable IPv6 over LPWAN. In order to support 1280-byte packets, as required for IPv6, SCHC includes a fragmentation functionality, since relevant LPWAN technologies offer very short data unit sizes and do not provide native fragmentation mechanisms. SCHC offers 3 fragmentation modes: No-ACK, ACK-Always, and ACK-on-Error, the latter being especially promising due to its reliability and high efficiency. In this article, we develop a mathematical model to compute the most critical performance parameters for the SCHC ACK-on-Error mode, namely, the acknowledgment traffic incurred by a fragment receiver for the successful delivery of a fragmented packet. The model is used to evaluate the SCHC ACK-on-Error mode performance, as well as to optimally tune its main parameters when used over LoRaWAN and Sigfox, for different packet sizes. Additionally, we illustrate how our derived optimal settings allow to reduce the acknowledgment traffic in a number of scenarios., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multimodal retransmission timer for LPWAN

  • Gómez Montenegro, Carlos
  • Crowcroft, Jon
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Low Power Wide Area Networks (LPWANs) are experiencing high momentum as an inexpensive solution for enabling Internet of Things (IoT) applications. Recent Internet connectivity support developments are expected to further fuel the adoption of LPWAN. However, the latter present challenges to Internet protocols. Remarkably, many LPWAN scenarios exhibit a multimodal Round Trip Time (RTT) distribution, which deviates from common Internet RTT characteristics. This leads to a significant mismatch between Retransmission TimeOut (RTO), computed by the standard TCP or alternative experimental RTO algorithms, and RTT. In this paper, we present the Multimodal RTO algorithm, which is able to selfadapt to the current RTT mode and produce suitable RTO values. Evaluation results show that the Multimodal RTO reduces the RTO versus RTT misalignment of the TCP RTO algorithm by an average factor of up to 5, and reduces latency in the presence of losses by up to 2 orders of magnitude, while operating safely. The Multimodal RTO is currently being considered by the IETF as a candidate mechanism for standardization, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Understanding the impact of the PC5 resource grid design on the capacity and efficiency of LTE-V2X in vehicular networks

  • Lopez, Leandro Miguel Wong
  • Mendoza, Charmae Franchesca Ugnaya
  • Casademont Serra, Jordi
  • Camps Mur, Daniel
Vehicular communications will foster mobility services and enable mass adoption of future autonomous vehicles, interchanging huge amount of data acquired from vehicles’ sensors. 3GPP Release 14 presents the first standard for supporting V2X in LTE. Several enhancements are introduced, including a new arrangement of the physical resource grid, where subchannels are the minimum resource unit instead of Resource Blocks. The resource grid is defined by several design parameters, some of them with constraints imposed by 3GPP specifications, that affect the maximum message transmission rate and efficiency of the system. Moreover, the optimum choice of these parameters is closely linked to message length, which is another variable parameter. This paper provides an analysis of the relationship between these design parameters (Resource Block per Subchannel, Transport Block Size Index, and coding rate), message size, and the system’s maximum capacity and efficiency. In doing so, we do not consider channel reuse or radio transmission characteristics because the focus of this paper is trying to find the resource grid design parameters that optimize system capacity, which is a very important aspect to consider by V2X operators., This work has been supported in part by the ERDF and the Spanish Government through projects TEC2016-79988-P and TEC2016-76795-C6-2-R; by the Spanish Ministerio de Industria, Energía y Turismo and CELLNEX through project TSI-100102-2015-13 V2XArch; and by the ERDF and Secretaria d’Universitats i Recerca de la Generalitat de Catalunya through projects 2017-SGR-00376 and FEM IoT 001-P- 001662. Additionally, part of this work has been produced in the master’s thesis of Leandro Miguel Lopez [22] that he carried out at the Universitat Politècnica de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An alternative to IEEE 802.11ba: wake-up radio with legacy IEEE 802.11 transmitters

  • Cervià Caballé, Martí
  • Calveras Augé, Anna M.
  • López Aguilera, M. Elena
  • García Villegas, Eduard
  • Demirkol, Ilker Seyfettin
  • Paradells Aspas, Josep
Current standardization process for Wake-up Radio (WuR) within the IEEE 802.11 Working Group, known as the IEEE 802.11ba, has brought interest to the IEEE 802.11-related technologies for the implementation of WuR systems. This paper proposes a new WuR system, where the Wake-up Transmitter (WuTx) is based on the legacy IEEE 802.11 Orthogonal Frequency Division Modulation (OFDM) Physical Layer (PHY) specification. Using the IEEE 802.11, OFDM PHY makes it possible for an IEEE 802.11a/g/n/ac transmitter to operate as WuTx for this WuR system. The WuTx generates a Wake-up Signal (WuS) coded with an amplitude-based digital modulation, achieving a bit rate of 250 kbps. This modulation, which we call Peak-Flat modulation, can be received using low-power receivers. A simulated proof of concept of the WuTx based on the IEEE 802.11g is presented and evaluated using MATLAB WLAN Toolbox. A method to generate the Peak-Flat modulated WuS from an IEEE 802.11a/g standard-compliant transmitter, using only software-level access, is explained. In addition, two possible low-power Wake-up Receiver (WuRx) architectures capable of decoding the presented modulation are proposed. The design of those receivers is generic enough to be used as a reference to compare the performance of the Peak-Flat Modulation with the other state-of-the-art approaches. The evaluation results conclude that the Peak-Flat modulation has similar performance compared to the other IEEE 802.11 WuR solutions on the reference receivers. Moreover, this solution provides a notorious advantage: legacy OFDM-based IEEE 802.11 transmitters can generate the Peak-Flat modulated WuS., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cooperative intelligent transport systems for vulnerable road users safety

  • Casademont Serra, Jordi
  • Calveras Augé, Anna M.
  • Quiñones, David
  • Navarro Rodero, Mònica
  • Arribas Lázaro, Javier
  • Catalán Cid, Miguel
Cooperative-Intelligent Transport Systems (C-ITS) are one of the flagships of new coming automotive and communication industries. Mobility needs to be safer and more efficient and C-ITS are the key for this new era. On the one hand, organizations like ETSI, IEEE, SAE, 3GPP or ISO are developing the standards for the new technologies and protocols and, on the other, manufacturers and operators are deploying and testing their first pilots. In this paper, we present a pilot developed by a group of stakeholders, in which vehicles will alert drivers of potential collisions with vulnerable road users riding bicycles. It is a multidisciplinary project where there are different architecture components: C-ITS stations integrated in vehicles, vehicles provided with digital cockpits that show warning messages to the driver, low-cost C-ITS stations attached to bicycles which are equipped with a high precision location system based on the fusion of different information sources as GPS, inertial sensors and Ultra Wide Band ranging and finally communication between C-ITS stations is provided by a network that supports low delay C-V2X communications with a Multi-access Edge Computing which takes routing decisions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design and implementation of a Wake-up Radio receiver for fast 250 kbps bit rate

  • López Aguilera, M. Elena
  • Hussein, Maison
  • Cervià Caballé, Martí
  • Paradells Aspas, Josep
  • Calveras Augé, Anna M.
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Wake-up radio (WuR) systems have appeared as a solution for reducing power consumption. As IEEE 802.11 is the preferred radio technology, IEEE 802.11 task group TGba focuses on the IEEE 802.11-based WuR standardization. We present an implementation of a wake-up receiver (WuRx), based on off-the-shelf components, using a microcontroller unit for decodification at the fastest bit rate of 250 kb/s allowed by TGba. The proof-of-concept that has been developed, does not aim at presenting an optimized power consumption solution for WuRx, but at enabling a comparative evaluation for several reception cases based on latency and power utilization. The evaluation of the performance shows the WuRx robustness in presence of frame receptions different from the expected for WuR operation or addressed to other WuRx in the surrounding area. This letter also presents the convenience of implementing a mechanism for avoiding consecutive erroneous WuRx identification matchings within the same WuR procedure., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy consumption model of SCHC packet fragmentation over Sigfox LPWAN

  • Aguilar Romero, Sergio
  • Platis, Antonio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
The Internet Engineering Task Force (IETF) has standardized a new framework, called Static Context Header Compression and fragmentation (SCHC), which offers adaptation layer functionality designed to support IPv6 over Low Power Wide Area Networks (LPWANs). The IETF is currently profiling SCHC, and in particular its packet fragmentation and reassembly functionality, for its optimal use over certain LPWAN technologies. Considering the energy constraints of LPWAN devices, it is crucial to determine the energy performance of SCHC packet transfer. In this paper, we present a current and energy consumption model of SCHC packet transfer over Sigfox, a flagship LPWAN technology. The model, which is based on real hardware measurements, allows to determine the impact of several parameters and fragment transmission strategies on the energy performance of SCHC packet transfer over Sigfox. Among other results, we have found that the lifetime of a device powered by a 2000 mAh battery, transmitting packets every 5 days, is 168 days for 2250-byte packets, while it increases to 1464 days for 77-byte packets, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bluetooth mesh energy consumption: a model

  • Darroudi, Seyed Mahdi
  • Caldera-Sànchez, Raül
  • Gómez Montenegro, Carlos
The recent publication of the Bluetooth Mesh standard is a remarkable milestone in the evolution of Bluetooth Low Energy (BLE). As a new technology in the Internet of Things (IoT) market, it is crucial to investigate the performance of Bluetooth Mesh. However, while a fundamental feature of Bluetooth Mesh is its suitability for energy-constrained devices, this aspect has not yet been properly considered in the literature. In this paper, we model the current consumption, lifetime and energy cost per delivered bit of a battery-operated Bluetooth Mesh sensor node. The model is based on measurements performed on a real hardware platform. Evaluation results quantify the impact of crucial Bluetooth Mesh parameters. Among others, we have found that a sensor device running on a simple 235 mAh battery, and sending a data message every 10 s, can achieve a lifetime of up to 15.6 months, whereas the asymptotic lifetime is 21.4 months., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bluetooth Low Energy mesh networks: a standards perspective

  • Darroudi, Seyed Mahdi
  • Gómez Montenegro, Carlos
  • Crowcroft, Jon
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Bluetooth Low Energy (BLE) mesh networking is an emerging technology domain that promises an important role in the Internet of Things. Significant market opportunities for BLE mesh networking have motivated the recent development of two different BLE mesh networking standards, Bluetooth Mesh and 6BLEMesh, produced by the Bluetooth SIG and IETF, respectively. These two standards follow different technical approaches. In this article, we present the main features of Bluetooth Mesh and 6BLEMesh, and investigate their performance characteristics and trade-offs., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Enhanced handover signaling through integrated MME-SDN controller solution

  • Jain, Akshay
  • López Aguilera, M. Elena
  • Demirkol, Ilker Seyfettin
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The future wireless networks are expected to be extremely dense and heterogeneous, with the users experiencing multi-connectivity through the multiple available radio access technologies (RATs). These prevalent characteristics, along with the strict QoS requirements, renders the handover (HO) process optimization as a critical objective for future networks. Along side the evolving network characteristics and methodologies, an evolving network architecture needs to be considered as well. Such evolution should not only facilitate HO process enhancement, i.e., reduction in HO delay and signaling, but it should also allow for a smooth transition from current to future wireless networks. Hence, in this work we firstly present an evolutionary core network entity called the Integrated MME-SDN Controller and the associated network architecture. The proposed architecture provides a migratory path for the existing 3GPP cellular architectures towards the 5G networks. Next, we discuss the benefits and challenges of such an architectural approach, with one of the benefits being a manageable CAPEX for the network operators through its transitional nature. Subsequently, utilizing the aforementioned proposed architecture, we present the handover process enhancement for the current 3GPP defined HO processes. We quantify the improvements achieved in terms of latency, transmission and processing cost for the different 3GPP HO processes. We also show that the proposed HO mechanism leads to a significant reduction in latency and signaling for certain types of HOs which, as a consequence, will critically benefit any dense and heterogeneous wireless system, such as 5G., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental evaluation of 6BLEMesh: IPv6-based BLE mesh networks

  • Darroudi, Seyed Mahdi
  • Gómez Montenegro, Carlos
Bluetooth Low Energy (BLE) has become a major wireless technology for the Internet of Things (IoT). Recent efforts of academia, industry and standards development organizations have focused on creating BLE mesh network solutions. 6BLEMesh is a specification being developed by the IETF that defines an IPv6-oriented approach for BLE mesh networking. In this paper, we perform an experimental evaluation of 6BLEMesh, based on a real implementation. We evaluate latency, round trip time (RTT) and energy consumption. For the latter, we model the device current consumption, we determine the energy efficiency of communication, and we obtain the theoretical device lifetime (for battery-operated devices), for three different hardware platforms, This work has been funded in part by the spanish Government through projects TEC2016-79988-P, PID2019-106808RA-I00, AEI/FEDER, UE, and by secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya grant 2017 sGR 376., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

CARAMEL: results on a secure architecture for connected and autonomous vehicles detecting GPS spoofing attacks

  • Vitale, Christian
  • Piperigkos, Nikos
  • Laoudias, Christos
  • Ellinas, Georgios
  • Casademont Serra, Jordi
  • Escrig, Josep
  • Kloukiniotis, Andreas
  • Lalos, Aris
  • Moustakas, Konstantinos
  • Diaz Rodriguez, Rodrigo
  • Baños, Daniel
  • Roqueta Crusats, Gemma
  • Kapsalas, Petros
  • Hofmann, Klaus Peter
  • Khodashenas, Pouria Sayyad
The main goal of the H2020-CARAMEL project is to address the cybersecurity gaps introduced by the new technological domains adopted by modern vehicles applying, among others, advanced Artificial Intelligence and Machine Learning techniques. As a result, CARAMEL enhances the protection against threats related to automated driving, smart charging of Electric Vehicles, and communication among vehicles or between vehicles and the roadside infrastructure. This work focuses on the latter and presents the CARAMEL architecture aiming at assessing the integrity of the information transmitted by vehicles, as well as at improving the security and privacy of communication for connected and autonomous driving. The proposed architecture includes: (1) multi-radio access technology capabilities, with simultaneous 802.11p and LTE-Uu support, enabled by the connectivity infrastructure; (2) a MEC platform, where, among others, algorithms for detecting attacks are implemented; (3) an intelligent On-Board Unit with anti-hacking features inside the vehicle; (4) a Public Key Infrastructure that validates in real-time the integrity of vehicle’s data transmissions. As an indicative application, the interaction between the entities of the CARAMEL architecture is showcased in case of a GPS spoofing attack scenario. Adopted attack detection techniques exploit robust in-vehicle and cooperative approaches that do not rely on encrypted GPS signals, but only on measurements available in the CARAMEL architecture., This work was supported by the European Union’s H2020 research and innovation programme under the CARAMEL project (Grant agreement No. 833611). The work of Christian Vitale, Christos Laoudias and Georgios Ellinas was also supported by the European Union’s Horizon 2020 Research and Innovation Programme under Grant 739551 (KIOS CoE) and from the Republic of Cyprus through the Directorate General for European Programmes, Coordination, and Development. The work of Jordi Casademont and Pouria Sayyad Khodashenas was also supported by FEDER and Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya through projects Fem IoT and SGR 2017-00376 and by the ERDF, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Sigfox energy consumption model

  • Gómez Montenegro, Carlos
  • Veras Revelles, Juan Carlos
  • Vidal Ferré, Rafael
  • Casals Ibáñez, Lluís
  • Paradells Aspas, Josep
Sigfox has become one of the main Low-Power Wide Area Network (LPWAN) technologies, as it has attracted the attention of the industry, academy and standards development organizations in recent years. Sigfox devices, such as sensors or actuators, are expected to run on limited energy sources; therefore, it is crucial to investigate the energy consumption of Sigfox. However, the literature has only focused on this topic to a very limited extent. This paper presents an analytical model that characterizes device current consumption, device lifetime and energy cost of data delivery with Sigfox. In order to capture a realistic behavior, the model has been derived from measurements carried out on a real Sigfox hardware module. The model allows quantifying the impact of relevant Sigfox parameters and mechanisms, as well as frame losses, on Sigfox device energy performance. Among others, evaluation results show that the considered Sigfox device, powered by a 2400 mAh battery, can achieve a theoretical lifetime of 1.5 or 2.5 years while sending one message every 10 min at 100 bit/s or 600 bit/s, respectively, and an asymptotic lifetime of 14.6 years as the message transmission rate decreases., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Use of Machine Learning for energy efficiency in present and future mobile networks

  • Sesto Castilla, David
  • García Villegas, Eduard
  • Lyberopoulos, George
  • Theodoropoulou, Eleni
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Given the current evolution trends in mobile cellular networks, which is approaching us towards the future 5G paradigm, novel techniques for network management are in the agenda. Machine Learning techniques are useful for extracting knowledge out of raw data; knowledge that can be applied to improving the experience in the operation of such systems. This paper proposes the use of Machine Learning applied to energy efficiency, which is set to be one major challenge in future network deployments. By studying the cell-level traces collected in a real network, we can study traffic patterns and derive predictive models for different cell load metrics with the aid of different machine learning techniques. Such models are applied into a simulation environment designed to test different algorithms which, according to cell load predictions, dynamically switch on and off base stations with the aim of providing energy savings in a mobile cellular network., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization-oriented RAW modeling of IEEE 802.11ah heterogeneous networks

  • Tian, Le
  • López Aguilera, M. Elena
  • García Villegas, Eduard
  • Tetemke Mehari, Michael
  • De Poorter, Eli
  • Steven, Latre
  • Famaey, Jeroen
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The new medium access method of IEEE 802.11ah, called Restricted Access Window (RAW), divides stations into different groups, and only allows stations in the same group to access the channel simultaneously, in order to reduce collisions and thus achieve better performance (e.g., throughput). However, the existing station grouping strategies only support homogeneous scenarios where all stations use the same modulation and coding scheme (MCS) and packet size. A surrogate model is an efficient mathematical model that represents the behavior of a complex system, trained with a limited set of labeled input-output data samples. In this paper, we present a surrogate model that can accurately predict RAW performance under a given Restricted Access Window (RAW) configuration in heterogeneous networks. Different from the homogeneous scenario, heterogeneous networks are defined by a large number of parameters, leading to an enormous design space, i.e., the order of 1017 possible data points. This is too big to achieve feasible training convergence. In this paper, we present a novel training methodology that leads to a new design space with highly reduced size, i.e., the order of 105 data points. The surrogate model converges when less than 6000 labeled data points are used for training, which is only a tiny portion of the whole design space. The results show that, the relative error between model prediction and simulation results is less than 0.1 for 95% of the data points, in the areas of the design space studied. Its low complexity and high precision make the proposed model a valuable tool to develop real-time RAW optimization algorithms for heterogeneous IEEE 802.11ah networks., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A bluetooth low energy indoor positioning system with channel diversity, weighted trilateration and Kalman filtering

  • Cantón Paterna, Vicente
  • Calveras Augé, Anna M.
  • Paradells Aspas, Josep
  • Perez Bullones, Maria Antonia
Indoor Positioning Systems (IPS) using Bluetooth Low Energy (BLE) technology are currently becoming real and available, which has made them grow in popularity and use. However, there are still plenty of challenges related to this technology, especially in terms of Received Signal Strength Indicator (RSSI) fluctuations due to the behaviour of the channels and the multipath effect, that lead to poor precision. In order to mitigate these effects, in this paper we propose and implement a real Indoor Positioning System based on Bluetooth Low Energy, that improves accuracy while reducing power consumption and costs. The three main proposals are: frequency diversity, Kalman filtering and a trilateration method what we have denominated “weighted trilateration”. The analysis of the results proves that all the proposals improve the precision of the system, which goes up to 1.82 m 90% of the time for a device moving in a middle-size room and 0.7 m for static devices. Furthermore, we have proved that the system is scalable and efficient in terms of cost and power consumption. The implemented approach allows using a very simple device (like a SensorTag) on the items to locate. The system enables a very low density of anchor points or references and with a precision better than existing solutions, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The SF12 well in LoRaWAN: problem and end-device-based solutions

  • Casals Ibáñez, Lluís
  • Gómez Montenegro, Carlos
  • Vidal Ferré, Rafael
© 2021 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), LoRaWAN has become a popular technology for the Internet of Things (IoT) device connectivity. One of the expected properties of LoRaWAN is high network scalability. However, LoRaWAN network performance may be compromised when even a relatively small number of devices use link-layer reliability. After failed frame delivery, such devices typically tend to reduce their physical layer bit rate by increasing their spreading factor (SF). This reaction increases channel utilization, which may further degrade network performance, even into congestion collapse. When this problem arises, all the devices performing reliable frame transmission end up using SF12 (i.e., the highest SF in LoRaWAN). In this paper, we identify and characterize the described network condition, which we call the SF12 Well, in a range of scenarios and by means of extensive simulations. The results show that by using alternative SF-management techniques it is possible to avoid the problem, while achieving a packet delivery ratio increase of up to a factor of 4.7., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hybrid GNSS/INS/UWB positioning for live demonstration assisted driving

  • Navarro Rodero, Mònica
  • Arribas Lázaro, Javier
  • Vilà-Valls, Jordi
  • Casademont Serra, Jordi
  • Calveras Augé, Anna M.
  • Catalán-Cid, Marisa
In Cooperative Intelligent Transport Systems, precise and reliable positioning and navigation is a key feature for assisted or autonomous driving. This contribution presents experimental results from a pilot demonstration involving different stakeholders for assisted driving in a smart city scenario. A low-cost multi-sensor fusion positioning prototype which integrates GNSS, INS and UWB measurements, with communication capabilities has been deployed into a 5G communication architecture to test real-time positioning and communication capabilities in delay constraint/safety applications. A description of the prototype and experimental performance results are provided., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of receiver-feedback techniques for fragmentation over LPWANs

  • Aguilar Romero, Sergio
  • Vidal Ferré, Rafael
  • Gómez Montenegro, Carlos
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The Internet Engineering Task Force (IETF) has standardized a new framework for IPv6 support over Low Power Wide Area Networks (LPWANs), called Static Context Header Compression and Fragmentation (SCHC). SCHC includes acknowledgment (ACK)-based mechanisms for reliable fragmented packet transmission. For the latter, SCHC defines a Receiver-Feedback Technique (RFT), called Compressed Bitmap (CB), by which a receiver reports to the sender whether the fragments carrying a packet have been received or not. Such information is carried as ACK payload. Considering the extraordinary frame size and message rate constraints of LPWANs, ACK payload size becomes crucial. In this paper, we compare the performance of CB with that of several alternative RFTs, namely List of Lost Fragments (LLF), List of Deltas (LoD), and Uncompressed Bitmap (UB), where the latter is used as a benchmark. We evaluate the considered RFTs in terms of ACK size, number of Layer 2 (L2) frames needed to carry an ACK, and ACK Time on Air. Our analysis shows that the use of RFTs different from CB offers significant performance improvement in many scenarios. Furthermore, we provide guidance on which RFT should be used for different packet sizes, error rates and error patterns., This research is funded in part by the ERDF and the Spanish Government through project TEC2016-79988-P and project PID2019-106808RA-I00, AEI/FEDER, EU., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improved handover signaling for 5G networks

  • Jain, Akshay
  • López Aguilera, M. Elena
  • Demirkol, Ilker Seyfettin
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Mobility management is a critical component for any new wireless standard to be ubiquitous. While 4G-LTE and prior wireless standards utilized vendor specific hardware and software on which mobility management (MM) functionality was implemented, recent 5G architecture releases by 3GPP indicate a complete departure from the same. 3GPP in release 14 and the upcoming release 15 has stressed upon the utilization of Software Defined Networking (SDN) and Network Function Virtualization (NFV) as the drivers of 5G technology. Consequently, new challenges related to MM and specifically handover management will be encountered owing to the inter-working setup between the 5G Next-Gen Core (NGC) and the Evolved Packet System (EPS) core. In this paper, we exploit the SDN to enhance the signaling of the HO methods proposed by 3GPP. Although the proposed approach can be applied to any HO method, in this paper we specifically evaluate the scenario wherein a dedicated interface between the Mobility Management Entity (MME) in the EPC and the Access and Mobility management Function (AMF) in the 5G NGC, i.e., N26 as specified by 3GPP, is non-existent. Such a scenario is reasonable during the initial deployment phases of 5G networks. We show that the proposed mechanism is efficient as compared to the 3GPP handover strategy in terms of latency, transmission and processing costs., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Publish/subscribe protocol in wireless sensor networks: improved reliability and timeliness

  • García Davis, Ernesto
  • Calveras Augé, Anna M.
The rapidly-evolving demand of applications using wireless sensor networks in several areas such as building and industrial automation or smart cities, among other, makes it necessary to determine and provide QoS support mechanisms which can satisfy the requirements of applications. In this paper we propose a mechanism that establishes different QoS levels, based on Publish/Subscribe model for wireless networks to meet application requirements, to provide reliable delivery of packet and timeliness. The first level delivers packets in a best effort way. The second one intends to provide reliable packet delivery with a novel approach for Retransmission Timeout (RTO) calculation, which adjusts the RTO depending on the subscriber Packet Delivery Ratio (PDR). The third one provides the same reliable packet delivery as the second one, but in addition, it provides data aggregation trying to be efficient in terms of energy consumption and the use of network bandwidth. The last one provides timeliness in the packet delivery. We evaluate each QoS Level with several performance metrics such as PDR, Message Delivery Ratio, Duplicated and Retransmitted Packet Ratio and Packet Timeliness Ratio to demonstrate that our proposal provides significant improvements based on the increase of the PDR obtained., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Transmitter localization in vessel-like diffusive channels using ring-shaped molecular receivers

  • Turan, Meriç
  • Akdeniz, Bayram Cevdet
  • Kuran, Mehmet Sükrü
  • Yilmaz, Hüseyin Birkan
  • Demirkol, Ilker Seyfettin
  • Pusane, Ali Emre
  • Tugcu, Tuna
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Molecular communication via diffusion in vessellike environment targets critical applications such as detection of abnormal and unhealthy cells. In this work, we derive the analytical formulation of the channel model for diffusion dominated movement, considering ring-shaped (i.e., patch) observing receivers and Poiseuille flow with the aim of localization of the transmitter cell. Then, we derive formulations using this channel model for two different application scenarios. We assume that the emission start time is known in the first scenario, and unknown in the second one. We successfully localize the transmitter cell using a single receiver for the first scenario, whereas two receivers are used to localize the transmitter cell in the second scenario. Lastly, the devised analytical framework is validated with simulations., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Wake-up radio: an enabler of wireless convergence

  • Cervià Caballé, Martí
  • Calveras Augé, Anna M.
  • Paradells Aspas, Josep
Nowadays, several wireless communication solutions targeted at low-power devices (e.g. sensors, actuators) compete for market dominance. As a consequence, the deployment of the Internet of Things is slowed by fragmentation. However, Cross-Technology Communication (CTC) has appeared as a solution capable of bridging the compatibility gap between non-interoperable devices. In this way, we propose using Wake-up Radio (WuR) to achieve high rate bidirectional CTC, introducing WuR assisted CTC (WuR-CTC). Although WuR was originally proposed to reduce radio power consumption, it provides a secondary communications channel that can be used for high-speed and bidirectional CTC. With WuRCTC, we demonstrate that WuR can lead to interoperability between non-compatible wireless devices, therefore, providing a compelling reason for the harmonization of the nascent WuR specifications. This article presents a WuR-CTC solution implemented on an heterogeneous testbed with IEEE 802.11 and IEEE 802.15.4 devices. The resulting testbed achieves reliable CTC with an effective throughput of 26.7 kbps. Moreover, the addition of WuR to the testbed devices provides energy savings, and, in a clear advantage over traditional duty-cycled solutions, allows devices to asynchronously maintain communications., Postprint (published version)