Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Passive radiative cooling of solar cells by low-cost and scalable metamaterials: physical simulation and efficiency limits

  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Editor(s): Alexandre Freundlich, Stéphane Collin, Karin Hinzer.-- SPIE OPTO, 22 January - 28 February 2022. San Francisco, California, United States.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Radiative cooling is an attractive concept for future sustainable energy strategies, as it might enable passive cooling of buildings and photovoltaic systems, hence facilitating energy savings by boosting performance and lifespan. The key idea is the adoption of materials that strongly emit thermal radiation in the atmosphere transparency window (wavelengths between 8 and 13 μm) as cooling layers. Significant progress in the field of metamaterials has enabled the realization of dielectric photonic structures with properties matching radiative cooling requirements and capable of going below ambient temperature. However, these structures are rather expensive and appear unsuitable for today’s large-scale manufacturing. In the present work, we have studied radiative cooling applied to Shockley-Queisser solar cells by exploring alternative materials, namely cementitious phases, which exhibit the required properties while being low-cost and scalable. We have determined their emission behavior by electromagnetic simulations and estimated the corresponding solar cell operating temperature by means of a detailed-balance model. The results have been benchmarked against the current state-of-the-art and hint at the possible realization of a new class of radiative coolers based on cheap and scalable cementitious materials., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Análisis de los principales compuestos del cemento para enfriado radiativo

  • Lezaun, Carlos
  • Dolado, Jorge S.
  • Pérez-Escudero, José M.
  • Liberal, Íñigo
  • Beruete, Miguel
  • MIRACLE Project ID: 964450
XXXVI Simposium Nacional de la Unión Científica Internacional de Radio, URSI 2021, Vigo, Spain (online), 20-25 Sep. 2021.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., In this work, a study of the viability of using concrete for radiative cooling is done by theoretically analysing some of the main compounds of concrete: C3S, CH and CSH. Atomistic simulations have been employed for determining the structure and the dielectric response of these phases. Interestingly, the materials have theoretically shown a night-time net cooling power of 55.68 W, 60.96 W and 62.43 W respectively. This preliminary study shows the potential of concrete as a possible cheap, scalable and widely used night-time radiative cooling structural material. Further research must be done in order to achieve a higher reflection in the solar band for day-time radiative cooling. To calculate de emissivity of the compounds, an analytical model has been used, which has nearly zero error and computes the data much faster than a simulator., Este trabajo ha recibido financiación del programa de investigación e innovación Horizonte 2020 de la Unión Europea, proyecto MIRACLE, Grant Agreement 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of a Radiative Cooling Material Database to Benchmark the Environmental Impact of a newly Developed Photonic Meta-Concrete

  • Adams, Nick
  • Allacker, Karen
  • MIRACLE Project ID: 964450
Society of Environmental Toxicology and Chemistry (SETAC) conference in Copenhagen (15-19/05/2022).-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Global warming and the heat-island-effect in cities led to an increased use of conventional air-conditioners. This increased usage is responsible for 10% of the total energy consumption and 7% of global greenhouse gas emissions. In the overall aim to reduce these greenhouse gas emissions and to mitigate climate change and the heat-island-effect, a new radiative cooling material is under development. Although radiative cooling materials already exist, this material stands out because, for the first time, it is based on conventional concrete. This poster describes the first step of the environmental life cycle assessment (LCA) study that is performed along the development of the photonic meta-concrete (PMC). In this step we generate a database with environmental data of existing radiative cooling materials in order to create a comparative base for the PMC. Information about the various materials is collected through a literature review and consultation of experts. The environmental impact of the materials are assessed with the Belgian LCA method for buildings, i.e. the MMG method. The MMG method is in line with the EN15804:A2 and hence covers 16 environmental impact categories, such as global warming potential, acidification, eutrophication, water scarcity, toxicity. Furthermore, the environmental impact will be compared with the first composition of the photonic meta-concrete. The first results show that a lot of product-specific information regarding radiative cooling materials is lacking to date to assess their environmental impact and this makes it challenging to create a reference database. However, the environmental impact of the radiative cooling materials assessed in this paper is in line with the expectations. The first mixture of the photonic meta-concrete is promising as this shows great potential from an environmental point of view compared to the existing daytime radiative cooling materials., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cement-based Radiactive Coolers for Photovoltataics: Towards a Practical Design

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
16th International Congress on the Chemistry of Cement 2023 (18-22 September 2023).-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving the efficiency of solar cells through radiative cooling

  • Testa, Pietro
  • Cappelluti, Federica
  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • MIRACLE Project ID: 964450
Polito EECE Posterday (2023), 2023 PhD Poster Day EECE" at Politecnico di Torino held on Sept 28 (2023)..-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Radiative cooling of solar cells with low-cost, scalable cementitious materials

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
1th Conferenza della Rete Italiana del Fotovoltaico (IFV)" on June 2023.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of radiative cooling on multi-junction solar cell under unconcentrated and low-concentrated light

  • Testa, Pietro
  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Trabajo presentado como póster a la IEEE 52nd Photovoltaic Specialist Conference, celebrada en Seattle, Washington (USA) del 9 al 14 de junio de 2024., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement No. 964450., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of radiative cooling on multi-junction solar cell under unconcentrated and low-concentrated light

  • Testa, Pietro
  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Comunicación presentada a la IEEE 52nd Photovoltaic Specialist Conference, celebrada en Seattle, Washington (USA) del 9 al 14 de junio de 2024., Multi-junction solar cells are a key technology for high efficiency photovoltaics. Since their performance and reliability are strongly influenced by the operating temperature, their effective thermal management is an important concern, especially in concentrating photovoltaics. Radiative cooling is a cost-effective, passive, and scalable solution for thermal management of solar cells. This technique can effectively expel alarge amount of heat by radiating it into outer space through the atmospheric transparency window between 8 and 13 μm. In this work, we analyze the impact of this cooling strategy on multijunction solar cells under different illumination conditions by means of a detailed balance model for the cell/cooler system. We show that the increase in efficiency resulting from reduced operating temperature is more significant for multi-junction architectures in comparison to single-junction ones, because of their more negative temperature coefficient. Furthermore, we explore two viable approaches for successfully utilizing the radiative cooler in low-concentration photovoltaic systems. Thefirst method involves increasing the size of the radiative cooler area, while the second entails combining it with a nonradiative cooling system., This project has received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreement no. 964450., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Lithography-free perfect narrowband absorbers using simple layered structures

  • Lezaun Capdevila, Carlos
  • Navajas Hernández, David
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Light absorbers are key components for multiple applications ranging from heat and energy management to communications and sensing. This work explores different complex permittivity combinations for material-reflector and material-spacer-reflector configurations, achieving perfect absorption under different permittivity regimes and thicknesses. Using silicon carbide, we discuss polarization and angle dependencies, and the potential of exploiting different permittivity regimes within a device for multi-band absorption. This work helps standardize absorber design and offer insights to engineer perfect absorbers for applications such as thermal emission, absorption, communication and sensing., The project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE and from project TED2021-132074B-C33, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR\.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Enhancing the infrared and visible emission properties of calcium silicate hydrate for radiative cooling using metamaterials

  • Lezaun Capdevila, Carlos
  • Dolado, Jorge S.
  • Torres García, Alicia E.
  • Pérez Escudero, José Manuel
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Two periodic structures composed of metal cylinders with different orientations are used to improve the solar reflection of calcium silicate hydrate (CSH) while maintaining its atmospheric emission. Interesting effects have been found when the distance between bars is small, suggesting that lattice effects, arising from the interaction between the rods could be leveraged in the design of these metamaterials. The size of the metal bars is selected based on state of the art micro-manufacturing techniques. This study limits its scope to a CSH gel model; i.e. the most important component of cement-based materials. Further research will be undertaken to consider a best description of the dielectric function of concrete., This work has been funded by the research and innovation program Horizon 2020 of the European union. Project MIRACLE, Grant Agreement 964450.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Nanoparticle derived suppressed-scattering bands for radiative cooling

  • Lezaun Capdevila, Carlos
  • Pérez Escudero, José Manuel
  • Torres García, Alicia E.
  • Caggiano, Antonio
  • Peralta, Ignacio
  • Dolado, Jorge S.
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Light scattering using resonant nanoparticles is crucial for improving sun irradiance reflection in a daytime radiative cooler. Popular nanoparticles in radiative cooling literature are analyzed in terms of scattering performance due to material dispersion. Different scattering properties in the infrared range have been detected while a similar behavior can be achieved in the solar range due to changes in material dispersion. Also, suppressed scattering windows are produced by dispersive nanoparticles, allowing high reflectance while enabling thermal emission selectively. Material dispersion alone produces such scattering windows, thus, given a material, they will always remain in the same region regardless geometry and location of particles. Lastly, calcium silicate hydrate (CSH), the main phase of concrete, is studied as a dispersive host example. These results demonstrate the importance of a co-design between host and nanoparticles dispersion for daytime radiative cooling and that nanoporosities design are a key ingredient that could allow concrete-based daytime radiative coolers., The authors acknowledge financial support from European Union's Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE.