Pasar al contenido principal

ANALISIS Y VALIDACION DE PARAMETROS DE ESTRUCTURA FORESTAL DERIVADOS DE LIDAR Y OTRAS TECNICAS EMERGENTES Y SU INCIDENCIA EN LA MODELIZACION DEL POTENCIAL COMBUSTIBLE

CGL2016-80705-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de posiciones y densidades TLS (Terrestrial Laser Scanning) para optimizar la estimación de parámetros forestales, Analyzing the position and density distributions of the Terrestrial Laser Scanning (TLS) to retrieve forest parameters

  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
[EN] In the last decades, the feasibility and efficiency of using TLS (Terrestrial Laser Scanning) in forest inventories have been studied. Data acquisition requires defining the scan locations to register the largest proportion of forest parameters in the plot. In this study, 31 location combinations of TLS scanners, from a single scan in the center of the plot to nine scans, were analyzed in 28 plots in a Mediterranean forest. Multiple linear regression models were generated to estimate mean height and aboveground biomass (AGB) from point cloud elevation metrics from each combination of scan locations. Additionally, the accuracy variation of the selected models by randomly reducing the point density was also analyzed. The analysis of the number of TLS scans shows that an increment in the number of scans does not necessarily mean an improvement in the statistical models for either variable. Results show for both variables that the influence of the point density on the accuracy of the regression model is significant when its value drops below one hundredth part of the initial point density, [ES] En las últimas décadas se ha investigado la viabilidad y eficiencia del uso del TLS (Terrestrial Laser Scanning) en la realización de inventarios forestales. La adquisición de las nubes de puntos en campo implica definir los puntos de ubicación del sensor para registrar la mayor proporción de parámetros forestales en la parcela. En este estudio se realizó un análisis de 31 combinaciones de posiciones de escaneo TLS, considerando desde un escaneo simple en el centro de la parcela hasta un escaneo múltiple de 9 escaneos en 28 parcelas de bosque Mediterráneo. Se generaron modelos de regresión lineal múltiple para la obtención de la altura dominante de la parcela y la biomasa aérea total, a partir de las métricas de distribución de alturas de las nubes de puntos en cada combinación. También se analizó la evolución de la precisión de los modelos seleccionados al reducir aleatoriamente la densidad de puntos. En el análisis del número de escaneos TLS se observa que el aumento del número de tomas no implica una mejora en los modelos para ninguna de las dos variables. Por otro lado, el estudio de la reducción de densidad de puntos muestra para ambas variables forestales que la precisión del modelo de regresión no comienza a decrecer significativamente hasta reducir la nube a una centésima parte de la densidad original de puntos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparing the generation of DTM in a forest ecosystem using TLS, ALS and UAV-DAP, and different software tools

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Remote sensing and photogrammetry techniques have demonstrated to be an important tool for the characterization of forest ecosystems. Nonetheless, the use of these techniques requires an accurate digital terrain model (DTM) for the height normalization procedure, which is a key step prior to any further analyses. In this manuscript, we assess the extraction of the DTM for different techniques (airborne laser scanning: ALS, terrestrial laser scanning: TLS, and digital aerial photogrammetry in unmanned aerial vehicle: UAV-DAP), processing tools with different algorithms (FUSION/LDV© and LAStools©), algorithm parameters, and plot characteristics (canopy and shrub cover, and terrain slope). To do this, we compare the resulting DTMs with one used as reference and extracted from classic surveying measurements. Our results demonstrate, firstly, that ALS and reference DTMs are similar in the different scenarios, except for steep slopes. Secondly, TLS DTMs are slightly less accurate than those extracted for ALS, since items such as trunks and shrubs cause a great occlusion due to the proximity of the instrument, and some of the points filtered as ground correspond to these items as well, therefore a finer setting of algorithm parameters is required. Lastly, DTMs extracted for UAV-DAP in dense canopy scenarios have a low accuracy, however, accuracy may be enhanced by modifying the processing tool and algorithm parameters. An accurate DTM is essential for further forestry applications, therefore, to know how to take advantage of the available data to obtain the most accurate DTM is also fundamental., The authors are thankful for the financial support provided by the Spanish Ministerio de Economía y Competitividad and FEDER, in the framework of the project CGL2016-80705-R.