Pasar al contenido principal

ANALISIS Y VALIDACION DE PARAMETROS DE ESTRUCTURA FORESTAL DERIVADOS DE LIDAR Y OTRAS TECNICAS EMERGENTES Y SU INCIDENCIA EN LA MODELIZACION DEL POTENCIAL COMBUSTIBLE

CGL2016-80705-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remote sensing for the Spanish forests in the 21st century: a review of advances, needs, and opportunities

  • Gómez, Cristina
  • Alejandro, Pablo
  • Hermosilla, Txomin
  • Montes, Fernando
  • Pascual, Cristina
  • Álvarez-Taboada, Flor
  • Tanase, Mihai A.
  • Valbuena, Rubén
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Forest ecosystems provide a host of services and societal benefits, including carbon storage, habitat for fauna, recreation, and provision of wood or non-wood products. In a context of complex demands on forest resources, identifying priorities for biodiversity and carbon budgets require accurate tools with sufficient temporal frequency. Moreover, understanding long term forest dynamics is necessary for sustainable planning and management. Remote sensing (RS) is a powerful means for analysis, synthesis, and report, providing insights and contributing to inform decisions upon forest ecosystems. In this communication we review current applications of RS techniques in Spanish forests, examining possible trends, needs, and opportunities offered by RS in a forestry context. Currently, wall-to-wall optical and LiDAR data are extensively used for a wide range of applications-many times in combination-whilst radar or hyperspectral data are rarely used in the analysis of Spanish forests. Unmanned Aerial Vehicles (UAVs) carrying visible and infrared sensors are gaining ground in acquisition of data locally and at small scale, particularly for health assessments. Forest fire identification and characterization are prevalent applications at the landscape scale, whereas structural assessments are the most widespread analyses carried out at limited extents. Unparalleled opportunities are offered by the availability of diverse RS data like those provided by the European Copernicus programme and recent satellite LiDAR launches, processing capacity, and synergies with other ancillary sources to produce information of our forests. Overall, we live in times of unprecedented opportunities for monitoring forest ecosystems with a growing support from RS technologies., Part of this work was funded by the Spanish Ministry of Science, innovation and University through the project AGL2016-76769-C2-1-R "Influence of natural disturbance regimes and management on forests dynamics. structure and carbon balance (FORESTCHANGE)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterizing understory vegetation in Mediterranean forests using full-waveform airborne laser scanning data

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Tompalski, P.
  • Coops, N.C.
[EN] The use of laser scanning acquired from the air, or ground, holds great potential for the assessment of forest structural attributes, beyond conventional forest inventory. The use of full-waveform airborne laser scanning (ALSFW) data allows for the extraction of detailed information in different vertical strata compared to discrete ALS (ALSD). Terrestrial laser scanning (TLS) can register lower vertical strata, such as understory vegetation, without issues of canopy occlusion, however is limited in its acquisition over large areas. In this study we examine the ability of ALSFW to characterize understory vegetation (i.e. maximum and mean height, cover, and volume), verified using TLS point clouds in a Mediterranean forest in Eastern Spain. We developed nine full-waveform metrics to characterize understory vegetation attributes at two different scales (3.75¿m square subplots and circular plots with a radius of 15¿m); with, and without, application of a height filter to the data. Four understory vegetation attributes were estimated at plot level with high R2 values (mean height: R2¿=¿0.957, maximum height: R2¿=¿0.771, cover: R2¿=¿0.871, and volume: R2¿=¿0.951). The proportion of explained variance was slightly lower at 3.75¿m side cells (mean height: R2¿=¿0.633, maximum height: R2¿=¿0.470, cover: R2¿=¿0.581, and volume R2¿=¿0.651). These results indicate that Mediterranean understory vegetation can be estimated and accurately mapped over large areas with ALSFW. The future use of these types of predictions includes the estimation of ladder fuels, which drive key fire behavior in these ecosystems., This research was developed mainly in the Integrated Remote Sensing Studio (IRSS) of University of British Columbia (UBC) (Canada) as a result of the Erasmus + KA-107 mobility grant. The authors thank the financial support provided by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the project CGL2016-80705-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analyzing the role of pulse density and voxelization parameters on full-waveform LiDAR-derived metrics

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] LiDAR full-waveform (LFW) pulse density is not homogeneous along study areas due to overlap between contiguous flight stripes and, to a lesser extent, variations in height, velocity and altitude of the platform. As a result, LFW-derived metrics extracted at the same spot but at different pulse densities differ, which is called ¿side-lap effect¿. Moreover, this effect is reflected in forest stand estimates, since they are predicted from LFW-derived metrics. This study was undertaken to analyze LFW-derived metric variations according to pulse density, voxel size and value assignation method in order to reduce the side-lap effect. Thirty LiDAR samples with a minimum density of 16 pulses.m¿2 were selected from the testing area and randomly reduced to 2 pulses.m¿2 with an interval of 1 pulse.m¿2, then metrics were extracted and compared for each sample and pulse density at different voxel sizes and assignation values. Results show that LFW-derived metric variations as a function of pulse density follow a negative exponential model similar to the exponential semivariogram curve, increasing sharply until they reach a certain pulse density, where they become stable. This value represents the minimum pulse density (MPD) in the study area to optimally minimize the side-lap effect. This effect can also be reduced with pulse densities lower than the MPD modifying LFW parameters (i.e. voxel size and assignation value). Results show that LFW-derived metrics are not equally influenced by pulse density, such as number of peaks (NP) and ROUGHness of the outermost canopy (ROUGH) that may be discarded for further analyses at large voxel sizes, given that they are highly influenced by pulse density. In addition, side-lap effect can be reduced by either increasing pulse density or voxel size, or modifying the assignation value. In practice, this leads to a proper estimate of forest stand variables using LFW data., This research has been funded by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the project CGL2016-80705-R. The authors also thank the Bureau of Land Management and the Panther Creek Remote Sensing and Research Cooperative Program for the data provided.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparative assessment of the vertical distribution of forest components using full-waveform airborne, discrete airborne and discrete terrestrial laser scanning data

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Fournier, Richard A.
  • Nguyen, Van-Tho
  • van Lier, Olivier R.
[EN] Laser scanning has the potential to accurately detect the vertical distribution of forest vegetative components. However, limitations are present and vary according to the system's platform (i.e., terrestrial or airborne) and recording method (i.e., discrete return or full-waveform). Terrestrial configurations detect close objects (i.e., lower vegetation strata) in more detail while airborne configurations detect a more detailed upper strata, with weak backscattered signals from lower strata. Moreover, discrete lidar systems record single or multiple hits from a given pulse at intercepted features in contrast to full-waveform systems, which register the pulse's complete backscattered signal providing complete vertical profiles. In this study, we examine for a boreal and a Mediterranean forest with contrasted conifer canopy densities: (i) the characterization of the vertical distribution and signal occlusion from three laser scanning configurations: full-waveform airborne (ALS(FW)), discrete airborne (ALS(D)), and discrete terrestrial (TLS); (ii) the comparison in the detection of understory vegetation by ALS(FW) and ALS(D) using TLS as reference; and (iii) the use of a methodological procedure based on the Gini index concept to group understory vegetation in density classes from both ALS(FW) and ALS(D) configurations. Our results demonstrate, firstly, that signal occlusion can be quantified by the rate of pulse reduction independently for data from all three laser scanning configurations. The ALS(D) configuration was the most affected by signal occlusion, leading to weak signal returns at the lower strata (z < 4 m) where the rate of pulse reduction was highest as a result of dense canopy covers. Secondly, we demonstrated the capabilities for both airborne laser scanning configurations to detect understory vegetation, albeit significantly more accurately with ALS(FW). Lastly, we demonstrated the use of the Gini index as an indicator to determine understory vegetation density classes, particularly for ALS(FW) data in dense canopy cover. We proceed to explain the limitations in detecting the vertical distribution from different configurations, and indicate that understory vegetation density classes may be successfully assigned with ALS(FW) in contrasted conifer canopy densities., This research was mainly developed in the Centre d'Applications et de Recherche en TELedetection of Universite de Sherbrooke, Canada. The authors are thankful for the financial support provided by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the project CGL2016-80705-R, and also the Canadian research project Assessment of Wood Attributes using Remote Sensing (AWARE) (NSERC CRDPJ-462973-14, grantee N.C. Coops, UBC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Processing and Classification Methods of UAV Photogrammetric Point Clouds for Forest Structure and Fire Behaviour Analysis

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
[ES] Los bosques son uno de los ecosistemas más críticos de la Tierra, cubriendo aproximadamente el 31% de la superficie terrestre y desempeñando un papel vital como sumideros de carbono, reservas de biodiversidad y reguladores del clima. Almacenan alrededor del 45% del carbono terrestre y albergan la mayor parte de la biodiversidad del planeta, lo que hace que su conservación sea esencial para el equilibrio ecológico. Sin embargo, estos ecosistemas están cada vez más amenazados por los incendios forestales, que cumplen un doble papel en la dinámica de los bosques: actúan tanto como reguladores naturales como potenciales destructores. La modelización avanzada del fuego es una herramienta clave para mejorar la predicción y mitigación de incendios. Los modelos de incendios 3D, basados en modelos de dinámica de fluidos computacional (CFD, por sus siglas en inglés), requieren datos de entrada de alta resolución sobre la carga de combustible, la estructura de la vegetación y la composición de especies. En este sentido, uno de los mayores desafíos en la modelización de incendios es la obtención de datos precisos y de alta resolución sobre las características de la vegetación a escala local. Las tecnologías de teledetección, en particular la fotogrametría aérea digital con UAV (UAV-DAP, por sus siglas en inglés), ofrecen una solución rentable y de alta resolución para caracterizar la estructura forestal. Mediante UAV-DAP, es posible obtener nubes de puntos que permiten la segmentación individual de plantas, la clasificación de especies y la extracción de características geométricas y espectrales clave para la dinámica del fuego. Estos datos pueden utilizarse para estimar variables relacionadas con los incendios. Sin embargo, a pesar de su potencial, UAV-DAP sigue estando infrautilizado debido a sus limitaciones técnicas inherentes y a la falta de metodologías y software especializados que permitan aprovechar plenamente tanto su información geométrica tridimensional como su contenido espectral. Esta tesis tiene como objetivo mejorar las técnicas de procesamiento de UAV-DAP a través de cuatro objetivos clave: i) evaluar la efectividad de las características espectrales, geométricas y de vecindad combinadas con técnicas de aprendizaje automático para la clasificación de nubes de puntos e identificación de especies vegetales; ii) desarrollar y validar metodologías para la clasificación de especies de matorral mediterráneo; iii) investigar las relaciones entre las variables geométricas y espectrales derivadas de UAV-DAP y la dinámica de propagación del fuego; iv) y estimar la biomasa aérea (AGB, por sus siglas en inglés) de arbustos y árboles mediante segmentación y clasificación a nivel de planta individual. Al abordar estos objetivos, esta tesis pretende desarrollar metodologías UAV-DAP capaces de proporcionar datos clave sobre la vegetación para mejorar la evaluación de la estructura forestal y el análisis del comportamiento del fuego en entornos mediterráneos., [CA] Els boscos són un dels ecosistemes més crítics de la Terra, cobrint aproximadament el 31% de la superfície terrestre i exercint un paper vital com a sumiders de carboni, reserves de biodiversitat i reguladors del clima. Emmagatzemen al voltant del 45% del carboni terrestre i alberguen la major part de la biodiversitat del planeta, la qual cosa fa que la seua conservació siga essencial per a l'equilibri ecològic. No obstant això, aquests ecosistemes estan cada vegada més amenaçats pels incendis forestals, que compleixen un doble paper en la dinàmica dels boscos: actuen tant com a reguladors naturals com a potencials destructors. La modelització avançada del foc és una eina clau per a millorar la predicció i mitigació dels incendis. Els models d'incendis en 3D, basats en models de dinàmica de fluids computacionals (CFD, per les seues sigles en anglés), requereixen dades d'entrada d'alta resolució sobre la càrrega de combustible, l'estructura de la vegetació i la composició d'espècies. En aquest sentit, un dels majors desafiaments en la modelització d'incendis és l'obtenció de dades precises i d'alta resolució sobre les característiques de la vegetació a escala local. Les tecnologies de teledetecció, en particular la fotogrametria aèria digital amb UAV (UAV-DAP, per les seues sigles en anglés), ofereixen una solució efectiva a nivell de costos i d'alta resolució per a caracteritzar l'estructura forestal. Mitjançant UAV-DAP, és possible obtindre núvols de punts que permeten la segmentació individual de plantes, la classificació d'espècies i l'extracció de característiques geomètriques i espectrals clau per a la dinàmica del foc. Aquestes dades poden utilitzar-se per a estimar variables relacionades amb els incendis. No obstant això, malgrat el seu potencial, UAV-DAP continua estant infrautilitzat a causa de les seues limitacions tècniques inherents i de la falta de metodologies i programari especialitzats que permeten aprofitar plenament tant la seua informació geomètrica tridimensional com el seu contingut espectral. Aquesta tesi té com a objectiu millorar les tècniques de processament d'UAV-DAP a través de quatre objectius clau: i) avaluar l'efectivitat de les característiques espectrals, geomètriques i de veïnat combinades amb tècniques d'aprenentatge automàtic per a la classificació de núvols de punts i la identificació d'espècies vegetals; ii) desenvolupar i validar metodologies per a la classificació d'espècies de matollar mediterrani; iii) investigar les relacions entre les variables geomètriques i espectrals derivades d'UAV-DAP i la dinàmica de propagació del foc; iv) i estimar la biomassa aèria (AGB, per les seues sigles en anglés) d'arbustos i arbres mitjançant segmentació i classificació a nivell de planta individual. En abordar aquests objectius, aquesta tesi pretén desenvolupar metodologies UAV-DAP que permeten proporcionar dades clau sobre la vegetació per a millorar l'avaluació de l'estructura forestal i l'anàlisi del comportament del foc en entorns mediterranis., [EN] Forests are among the most critical ecosystems on Earth, covering approximately 31% of the global land area and serving as vital carbon sinks, biodiversity hotspots, and climate regulators. They store about 45% of terrestrial carbon and support the majority of Earth's biodiversity, making their conservation essential for ecological balance. However, these ecosystems are increasingly threatened by wildfires, which play a dual role in forest dynamics¿acting as both natural regulators and potential destructors. Advancing wildfire modelling is a key tool for improving fire prediction and mitigation efforts. 3D wildfire models, based in computational fluid dynamics (CFD) models, require high-resolution input data on fuel loads, vegetation structure, and species composition. In this regard, one of the greatest challenges in fire modelling is obtaining accurate, high-resolution data on vegetation characteristics at the local scale. Remote sensing technologies, particularly UAV-based Digital Aerial Photogrammetry (UAV-DAP), offer a cost-effective and high-resolution solution for characterize forest structure. Using UAV-DAP is possible to obtain point clouds that enable individual plant segmentation, species classification, and the extraction of key geometric and spectral features relevant to wildfire dynamics. These data can be utilized to estimate fire-related variables. However, despite its potential, UAV-DAP remains underutilized due to inherent technical limitations and the absence of specialized methodologies and software capable of fully leveraging both its three-dimensional geometric and spectral information. This thesis aims to refine UAV-DAP processing techniques through four key objectives: i), evaluating the effectiveness of spectral, geometric, and neighbourhood features combined with machine learning techniques for point cloud classification and vegetation species identification; ii), developing and validating methodologies for classifying Mediterranean shrub species; iii), investigating the relationships between geometric and spectral variables derived from UAV-DAP data and fire spread dynamics; iv), and estimating AGB for shrubs and trees through segmentation and classification at the individual plant level. By addressing these objectives, this thesis intends to develop UAV-DAP methodologies capable of providing key vegetation data to enhance forest structure assessment and fire behaviour analysis in Mediterranean environments., The author of this PhD Thesis gratefully acknowledges the financial support provided by the Spanish Ministerio de Economía, Industria y Competitividad (MCIN/AEI/10.13039/501100011033) and the ESF “Investing in your future.” This support was made possible through the predoctoral contract BES-2017-081920, associated with the FIRMACARTO project (CGL2016-80705-R, 2016-2019), and a subsequent contract under the R+D+i project FireMode (PID2020-117808RB-C21, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimating quality of life dimensions from urban spatial pattern metrics

  • Sapena, Marta
  • Wurm, Michael
  • Taubenböck, Hannes
  • Tuia, Devis
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] The spatial structure of urban areas plays a major role in the daily life of dwellers. The current policy framework to ensure the quality of life of inhabitants leaving no one behind, leads decision-makers to seek better-informed choices for the sustainable planning of urban areas. Thus, a better understanding between the spatial structure of cities and their socio-economic level is of crucial relevance. Accordingly, the purpose of this paper is to quantify this two-way relationship. Therefore, we measured spatial patterns of 31 cities in North Rhine-Westphalia, Germany. We rely on spatial pattern metrics derived from a Local Climate Zone classification obtained by fusing remote sensing and open GIS data with a machine learning approach. Based upon the data, we quantified the relationship between spatial pattern metrics and socio-economic variables related to `education¿, `health¿, `living conditions¿, `labor¿, and `transport¿ by means of multiple linear regression models, explaining the variability of the socio-economic variables from 43% up to 82%. Additionally, we grouped cities according to their level of `quality of life¿ using the socio-economic variables, and found that the spatial pattern of low-dense built-up types was different among socio-economic groups. The proposed methodology described in this paper is transferable to other datasets, levels, and regions. This is of great potential, due to the growing availability of open statistical and satellite data and derived products. Moreover, we discuss the limitations and needed considerations when conducting such studies., This research has been partially funded by the Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (CGL2016-80705-R) and by the Swiss National Science Foundation (PP00P2-150593).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identifying urban growth patterns through land-use/land-cover spatio-temporal metrics: Simulation and analysis

  • Sapena Moll, Marta
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] The spatial pattern of urban growth determines how the physical, socio-economic and environmental characteristics of urban areas change over time. Monitoring urban areas for early identification of spatial patterns facilitates assuring their sustainable growth. In this paper, we assess the use of spatio-temporal metrics from land-use/land-cover (LULC) maps to identify growth patterns. We applied LULC change models to simulate different scenarios of urban growth spatial patterns (i.e., expansion, compact, dispersed, road-based and leapfrog) on various baseline urban forms (i.e., monocentric, polycentric, sprawl and linear). Then, we computed the spatio-temporal metrics for the simulated scenarios, selected the most informative metrics by applying discriminant analysis and classified the growth patterns using clustering methods. Two metrics, Weighted mean expansion and Weighted Euclidean distance, which account for the densification, compactness and concentration of urban growth, were the most efficient for classifying the five growth patterns, despite the influence of the baseline urban form. These metrics have the potential to identify growth patterns for monitoring and evaluating the management of developing urban areas., This work was supported by the the Spanish Ministerio de Economia y Competitividad and FEDER [CGL2016-80705-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación del uso de LiDAR discreto, full-waveform y TLS en la clasificación por composición de especies en bosques mediterráneos, Assessing the use of discrete, full-waveform LiDAR and TLS to classify Mediterranean forest species composition

  • Torralba, J.
  • Crespo-Peremarch, P.
  • Ruiz, L. A.
[EN] LiDAR technology –airborne and terrestrial- is becoming more relevant in the development of forest inventories, which are crucial to better understand and manage forest ecosystems. In this study, we assessed a classification of species composition in a Mediterranean forest following the C4.5 decision tree. Different data sets from airborne laser scanner full-waveform (ALSFW), discrete (ALSD) and terrestrial laser scanner (TLS) were combined as input data for the classification. Species composition were divided into five classes: pure Quercus ilex plots (QUI); pure Pinus halepensis dense regenerated (HALr); pure P. halepensis (HAL); pure P. pinaster (PIN); and mixed P. pinaster and Q. suber (mPIN). Furthermore, the class HAL was subdivided in low and dense understory vegetation cover. As a result, combination of ALSFW and TLS reached 85.2% of overall accuracy classifying classes HAL, PIN and mPIN. Combining ALSFW and ALSD, the overall accuracy was 77.0% to discriminate among the five classes. Finally, classification of understory vegetation cover using ALSFW reached an overall accuracy of 90.9%. In general, combination of ALSFW and TLS improved the overall accuracy of classifying among HAL, PIN and mPIN by 7.4% compared to the use of the data sets separately, and by 33.3% with respect to the use of ALSD only. ALSFW metrics, in particular those specifically designed for detection of understory vegetation, increased the overall accuracy 9.1% with respect to ALSD metrics. These analyses show that classification in forest ecosystems with presence of understory vegetation and intermediate canopy strata is improved when ALSFW and/or TLS are used instead of ALSD., [ES] La tecnología LiDAR, tanto en sus versiones aerotransportada como terrestre, ha adquirido relevancia en los últimos años en la realización de inventarios forestales que permiten entender y adecuar la gestión de los ecosistemas forestales. En este estudio, se evaluó la clasificación por composición de especies en un bosque mediterráneo mediante el árbol de decisión C4.5. Para ello, se emplearon diferentes conjuntos de datos derivados de LiDAR discreto (ALSD ), LiDAR de retorno de onda completa (full-waveform, ALSFW) y láser escáner terrestre (TLS) como datos de entrada de la clasificación. La composición de especies se dividió en cinco clases: parcelas puras de Quercus ilex (QUI); puras de Pinus halepensis regenerado (HALr); puras de P. halepensis (HAL); puras de P. pinaster (PIN); y mixta de P. pinaster y Q. suber (mPIN). Además, se realizó una subdivisión de la clase HAL en cobertura de sotobosque escasa y densa. Como resultado se obtuvo una fiabilidad del 85,2% en la clasificación de las clases HAL, PIN y mPIN combinando ALSFW y TLS. En la clasificación de las cinco composiciones de especies, la fiabilidad alcanzada empleando ALSFW y ALSD fue del 77,0%. Finalmente, en la clasificación de las subclases de cobertura de sotobosque se logró un 90,9% de fiabilidad con ALSFW. En general, la combinación de ALSFW y TLS mejoró los resultados en un 7,4% en la clasificación de las clases HAL, PIN y mPIN en comparación con el uso de los datos de los sensores por separado, y en un 33,3% con respecto al uso de ALSD. Las métricas ALSFW, en particular aquellas diseñadas especialmente para la detección del sotobosque, mejoraron la precisión en un 9,1% con respecto a las métricas derivadas de ALSD. Estos análisis muestran que el uso del ALSFW y TLS mejora la clasificación de los ecosistemas forestales con presencia de sotobosque y diferentes especies arbóreas en los estratos intermedios con respecto al ALSD., This research has been funded by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the project CGL2016-80705-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Software de investigación Software (Software)

Class3Dp

  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Estornell Cremades, Javier|||0000-0003-0854-5358
[EN] Class3Dp is a software tool developed for supervised classification of photogrammetric point clouds. It allows the selection of training samples and classification of point clouds according to different features and machine learning models. Point clouds obtained from photogrammetric algorithms (e.g., Structure from Motion) include spectral information recorded in the image acquisition process using RGB, multispectral or hyperspectral sensors. The software extracts spectral and geometric features from the point clouds to be used for point classification., The financial support for its development has been provided by the grant BES-2017-081920 and the R&D&I projects CGL2016-80705-R and PID2020-117808RB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "FSE Invierte en tu futuro".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de posiciones y densidades TLS (Terrestrial Laser Scanning) para optimizar la estimación de parámetros forestales, Analyzing the position and density distributions of the Terrestrial Laser Scanning (TLS) to retrieve forest parameters

  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
[EN] In the last decades, the feasibility and efficiency of using TLS (Terrestrial Laser Scanning) in forest inventories have been studied. Data acquisition requires defining the scan locations to register the largest proportion of forest parameters in the plot. In this study, 31 location combinations of TLS scanners, from a single scan in the center of the plot to nine scans, were analyzed in 28 plots in a Mediterranean forest. Multiple linear regression models were generated to estimate mean height and aboveground biomass (AGB) from point cloud elevation metrics from each combination of scan locations. Additionally, the accuracy variation of the selected models by randomly reducing the point density was also analyzed. The analysis of the number of TLS scans shows that an increment in the number of scans does not necessarily mean an improvement in the statistical models for either variable. Results show for both variables that the influence of the point density on the accuracy of the regression model is significant when its value drops below one hundredth part of the initial point density, [ES] En las últimas décadas se ha investigado la viabilidad y eficiencia del uso del TLS (Terrestrial Laser Scanning) en la realización de inventarios forestales. La adquisición de las nubes de puntos en campo implica definir los puntos de ubicación del sensor para registrar la mayor proporción de parámetros forestales en la parcela. En este estudio se realizó un análisis de 31 combinaciones de posiciones de escaneo TLS, considerando desde un escaneo simple en el centro de la parcela hasta un escaneo múltiple de 9 escaneos en 28 parcelas de bosque Mediterráneo. Se generaron modelos de regresión lineal múltiple para la obtención de la altura dominante de la parcela y la biomasa aérea total, a partir de las métricas de distribución de alturas de las nubes de puntos en cada combinación. También se analizó la evolución de la precisión de los modelos seleccionados al reducir aleatoriamente la densidad de puntos. En el análisis del número de escaneos TLS se observa que el aumento del número de tomas no implica una mejora en los modelos para ninguna de las dos variables. Por otro lado, el estudio de la reducción de densidad de puntos muestra para ambas variables forestales que la precisión del modelo de regresión no comienza a decrecer significativamente hasta reducir la nube a una centésima parte de la densidad original de puntos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Aplicaciones de los índices de fragmentación de los usos del suelo para caracterizar la expansión urbana, Applying LU/LC fragmentation indices for characterization of urban sprawl

  • Sapena, Marta
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] The growing number of people living in urban areas implies the need for more sustainable landscape management. The analysis and monitorization of urban areas allows for the quantification and characterization of urban sprawl processes. Currently, new geospatial and statistical databases are being developed in Europe (Urban Atlas and Urban Audit) with up-to-date and homogeneous information on urban areas, easing its comparison and monitorization, as well as the development of tools for computing urban fragmentation metrics by means of these data, such as IndiFrag. In this work, three applications of fragmentation metrics in multiple scales are presented. Firstly, an intra-urban analysis has been conducted by municipalities in Rome in two dates. Secondly, a massive analysis, comparing at the inter-urban level the fragmentation degree for one date and their growth patterns in a sample of 68 European urban areas. Finally, multiple regression models were tested to explore the prediction of socio-economic variables using the fragmentation metrics of the 68 urban areas. The outcomes show that fragmentation metrics for the analysis of morphology, composition, and urban growth, allow for quantifying urban sprawl patterns at intra- and inter-urban levels, facilitating its relation with socioeconomic variables., [ES] El creciente aumento de población residente en áreas urbanas hace que sea necesaria una gestión del territorio más sostenible. El análisis y monitorización las áreas urbanas permite cuantificar y caracterizar los procesos de expansión urbana. Actualmente, se están desarrollando bases de datos geoespaciales y estadísticas a nivel europeo (Urban Atlas y Urban Audit) con información relativa a las áreas urbanas, de manera homogénea y actualizada, que facilitan su comparación y monitorización, además de herramientas para calcular métricas de fragmentación urbanas a partir de estos datos, como IndiFrag. En este trabajo se presentan tres aplicaciones de las métricas de fragmentación a diferentes escalas. En primer lugar, se ha elaborado un análisis intraurbano por municipios en Roma en dos fechas. En segundo lugar, un análisis masivo, donde se realiza una comparación interubana de los niveles de fragmentación, para una fecha, y de sus patrones de crecimiento, de un total de 68 áreas urbanas europeas. Por último, se han calculado modelos de predicción de variables socioeconómicas a partir de las métricas de fragmentación de las 68 áreas urbanas. Los resultados obtenidos muestran que el análisis de la morfología, composición, y del crecimiento urbano a partir de las métricas de fragmentación es adecuado para cuantificar los patrones de expansión en escalas intra e interurbanas, posibilitando su relación con variables socioeconómicas., Este trabajo ha sido financiado por el Ministerio de Economía y Competitividad y FEDER, en el marco del proyecto CGL2016-80705-R y con el contrato del Fondo de Garantía Juvenil PEJ-2014-A-45358.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterizing Landscape Spatial Heterogeneity Using Semivariogram Parameters Derived from NDVI Images, Caracterizacão da heterogeneidade espacial da paisagem utilizando parâmetros do semivariograma derivados de imagens NDVI

  • de Oliveira Silveira, Eduarda Martiniano
  • de Mello, Jose Marcio
  • Acerbi Junior, Fausto Weimar
  • dos Reis, Aliny Aparecida
  • Withey, Kieran Daniel
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Assuming a relationship between landscape heterogeneity and measures of spatial dependence by using remotely sensed data, the aim of this work was to evaluate the potential of semivariogram parameters, derived from satellite images with different spatial resolutions, to characterize landscape spatial heterogeneity of forested and human modified areas. The NDVI (Normalized Difference Vegetation Index) was generated in an area of Brazilian amazon tropical forest (1,000 km²). We selected samples (1 x 1 km) from forested and human modified areas distributed throughout the study area, to generate the semivariogram and extract the sill (¿²-overall spatial variability of the surface property) and range (¿-the length scale of the spatial structures of objects) parameters. The analysis revealed that image spatial resolution influenced the sill and range parameters. The average sill and range values increase from forested to human modified areas and the greatest between-class variation was found for LANDSAT 8 imagery, indicating that this image spatial resolution is the most appropriate for deriving sill and range parameters with the intention of describing landscape spatial heterogeneity. By combining remote sensing and geostatistical techniques, we have shown that the sill and range parameters of semivariograms derived from NDVI images are a simple indicator of landscape heterogeneity and can be used to provide landscape heterogeneity maps to enable researchers to design appropriate sampling regimes. In the future, more applications combining remote sensing and geostatistical features should be further investigated and developed, such as change detection and image classification using object-based image analysis (OBIA) approaches., [PT] Assumindo a existência de uma relação entre a heterogeneidade da paisagem e medidas de dependência espacial obtidas de dados de sensoriamento remoto, o objetivo deste estudo foi avaliar o potencial dos parâmetros do semivariograma derivados de imagens de satélite com diferentes resoluções espaciais, para caracterizar áreas cobertas por floresta e áreas sob ação antrópica. Para isso, o NDVI (Índice de Vegetação da Diferença Normalizada) de cada umas das imagens (SPOT 6, Landsat 8 e MODIS Terra) foi gerado em uma área de floresta tropical Amazônica (1.000 km²), onde foram selecionadas amostras (1 x 1 km) de áreas florestadas e áreas antrópicas. A partir destes dados, foram gerados os semivariogramas e extraídos os parâmetros patamar (¿²-variabilidade espacial total) e alcance (¿-distância dentro da qual as amostras apresentam-se estruturadas espacialmente). A análise revelou que a resolução espacial das imagens influencia os parâmetros ¿² e ¿, apresentando significativo aumento das áreas de florestas para as áreas sob ação antrópica. A maior variação entre estas classes foi obtida com as imagens Landsat 8, indicando estas imagens, com resolução espacial de 30 metros, a mais apropriada para a obtenção dos parâmetros do semivariograma objetivando a caracterização da heterogeneidade espacial da paisagem. Combinando o sensoriamento remoto e técnicas geostatisticas, demonstrou-se que os parâmetros do semivariograma derivados de imagens NDVI podem ser utilizados como um simples indicador de heterogeneidade da paisagem, gerando mapas que permitem aos pesquisadores delinearem com maior eficácia o regime de amostragem. Outras aplicações combinando estas duas técnicas devem ser investigadas, como por exemplo a detecção de mudanças na cobertura do solo e a classificação de imagens utilizando análises orientada a objetos (OBIA)., The authors are grateful to the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES), Department of Forest Science of the Federal University of Lavras (UFLA) and the ONF Brazil group for supporting this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of spatial correlation in predictive models of forest variables that use LiDAR auxiliary information

  • Mauro, Francisco
  • Monleón, V. J.
  • Temesgen, H.
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Accounting for spatial correlation of LiDAR model errors can improve the precision of model-based estimators. To estimate spatial correlation, sample designs that provide close observations are needed, but their implementation might be prohibitively expensive. To quantify the gains obtained by accounting for the spatial correlation of model errors, we examined (i) the spatial correlation patterns of residuals from LiDAR linear models developed to predict volume, total and stem biomass per hectare, quadratic mean diameter (QMD), basal area, mean and dominant height, and stand density and (ii) the impact of field plot size on the spatial correlation patterns in a standwise managed Mediterranean forest in central Spain. For all variables, the correlation range of model residuals consistently increased with plot radius and was always below 60 m except for stand density, where it reached 85 m. Except for QMD, correlation ranges of model residuals were between 1.06 and 8.16 times shorter than those observed for the raw variables. Based on the relatively short correlation ranges observed when the LiDAR metrics were used as predictors, the assumption of independent errors in many forest management inventories seems to be reasonable and appropriate in practice., The authors wish to thank Jay Ver Hoef and Isabel Molina for their valuable comments on earlier versions of the manuscript. The U.S. Bureau of Land Management, the Spanish Ministry of Industry, Tourism and Trade, and the Spanish Ministry of Science and Innovation provided financial support in the framework of the projects "Use of LIDAR and other remote sensing data with FIA plots for mapping forest inventory in Southwest Oregon," InForest II TSI-020100-2009-815, and CGL2010-19591/BTE, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparing the generation of DTM in a forest ecosystem using TLS, ALS and UAV-DAP, and different software tools

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Carbonell-Rivera, Juan Pedro|||0000-0002-6724-6780
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Remote sensing and photogrammetry techniques have demonstrated to be an important tool for the characterization of forest ecosystems. Nonetheless, the use of these techniques requires an accurate digital terrain model (DTM) for the height normalization procedure, which is a key step prior to any further analyses. In this manuscript, we assess the extraction of the DTM for different techniques (airborne laser scanning: ALS, terrestrial laser scanning: TLS, and digital aerial photogrammetry in unmanned aerial vehicle: UAV-DAP), processing tools with different algorithms (FUSION/LDV© and LAStools©), algorithm parameters, and plot characteristics (canopy and shrub cover, and terrain slope). To do this, we compare the resulting DTMs with one used as reference and extracted from classic surveying measurements. Our results demonstrate, firstly, that ALS and reference DTMs are similar in the different scenarios, except for steep slopes. Secondly, TLS DTMs are slightly less accurate than those extracted for ALS, since items such as trunks and shrubs cause a great occlusion due to the proximity of the instrument, and some of the points filtered as ground correspond to these items as well, therefore a finer setting of algorithm parameters is required. Lastly, DTMs extracted for UAV-DAP in dense canopy scenarios have a low accuracy, however, accuracy may be enhanced by modifying the processing tool and algorithm parameters. An accurate DTM is essential for further forestry applications, therefore, to know how to take advantage of the available data to obtain the most accurate DTM is also fundamental., The authors are thankful for the financial support provided by the Spanish Ministerio de Economía y Competitividad and FEDER, in the framework of the project CGL2016-80705-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of land use/land cover spatio-temporal metrics and population dynamics for urban growth characterization

  • Sapena Moll, Marta
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] Promoting sustainable urbanization and limiting land consumption is a local and regional priority policy target in Europe. Monitoring and quantifying urban growth supports decision-making processes for the prevention of ecological and socio-economic consequences. In this work, we present a methodology based on spatio-temporal metrics and a new index (PUGI), that quantifies the inequality of growth between population and urban areas, to analyze and compare urban growth patterns at different levels. We computed an exhaustive set of spatio-temporal metrics at local level in a testing sample of six urban areas from the Urban Atlas database, then un-correlated metrics were selected and the data were interpreted at various levels. Results allow for a differentiation of growing patterns, discriminating between compact and sprawl trends. The index proposed complements the analysis by including demographic dynamics, being also useful for assessing the growing imbalance between the progression on residential areas and the population change at local level. The analysis at various levels contributes to a better understanding of urban growth patterns and its relation to sustainable policies not only within urban areas, but also for the comparison across Europe., This research has been funded by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the project CGL2016-80705-R and the Fondo de Garantia Juvenil contract PEJ-2014-A-45358.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A full-waveform airborne laser scanning metric extraction tool for forest structure modelling. Do scan angle and radiometric correction matter?

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] In the last decade, full-waveform airborne laser scanning (ALSFW) has proven to be a promising tool for forestry applications. Compared to traditional discrete airborne laser scanning (ALSD), it is capable of registering the complete signal going through the different vertical layers of the vegetation, allowing for a better characterization of the forest structure. However, there is a lack of ALSFW software tools for taking greater advantage of these data. Additionally, most of the existing software tools do not include radiometric correction, which is essential for the use of ALSFW data, since extracted metrics depend on radiometric values. This paper describes and presents a software tool named WoLFeX for clipping, radiometrically correcting, voxelizing the waves, and extracting object-oriented metrics from ALSFW data. Moreover, extracted metrics can be used as input for generating either classification or regression models for forestry, ecology, and fire sciences applications. An example application of WoLFeX was carried out to test the influence of the relative radiometric correction and the acquisition scan angle (1) on the ALSFW metric return waveform energy (RWE) values, and (2) on the estimation of three forest fuel variables (CFL: canopy fuel load, CH: canopy height, and CBH: canopy base height). Results show that radiometric differences in RWE values computed from different scan angle intervals (0°¿5° and 15°¿20°) were reduced, but not removed, when the relative radiometric correction was applied. Additionally, the estimation of height variables (i.e., CH and CBH) was not strongly influenced by the relative radiometric correction, while the model obtained for CFL improved from R2 = 0.62 up to R2 = 0.79 after applying the correction. These results show the significance of the relative radiometric correction for reducing radiometric differences measured from different scan angles and for modelling some stand-level forest fuel variables., This research was funded by the Spanish Ministerio de Economia y Competitividad and FEDER, in the framework of the projects ForeStructure (CGL2013-46387-C2-1-R) and FIRMACARTO (CGL2016-80705-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Processing and analysis of airborne full-waveform laser scanning data for the characterization of forest structure and fuel properties, Procesado y análisis de datos láser escáner full-waveform aéreo para la caracterización de la estructura y combustibilidad forestal

  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] This PhD thesis addresses the development of full-waveform airborne laser scanning (ALSFW) processing and analysis methods to characterize the vertical forest structure, in particular the understory vegetation. In this sense, the influence of several factors such as pulse density, voxel parameters (voxel size and assignation value), scan angle at acquisition, radiometric correction and regression methods is analyzed on the extraction of ALSFW metric values and on the estimate of forest attributes. Additionally, a new software tool to process ALSFW data is presented, which includes new metrics related to understory vegetation. On the other hand, occlusion caused by vegetation in the ALSFW, discrete airborne laser scanning (ALSD) and terrestrial laser scanning (TLS) signal is characterized along the vertical structure. Finally, understory vegetation density is detected and determined by ALSFW data, as well as characterized by using the new proposed metrics., [ES] Esta tesis doctoral aborda el desarrollo de métodos de procesado y análisis de datos láser escáner full-waveform aéreo (ALSFW) para la caracterización de la estructura vertical del bosque y, en particular, del sotobosque. En este sentido, se analiza la influencia de diferentes factores como la densidad de pulso, parámetros de voxelización (tamaño de vóxel y tipo de asignación), ángulo de escaneo en la adquisición, corrección radiométrica y métodos de regresión en la extracción de los valores de métricas ALSFW y en la estimación de atributos forestales. Asimismo, se presenta una nueva herramienta de procesado de datos ALSFW, la cual incluye nuevas métricas relacionadas con el sotobosque. Por otro lado, se caracteriza la oclusión provocada por la vegetación en la señal ALSFW, láser escáner discreto aéreo (ALSD) y láser escáner terrestre (TLS) en toda la estructura vertical. Por último, se detecta y determina la densidad de sotobosque mediante datos ALSFW, así como su caracterización empleando las nuevas métricas propuestas., The author of this PhD thesis is thankful for the financial support provided by the Spanish Ministerio de Economía y Competitividad and FEDER, in the framework of the projects ForeStructure CGL2013-46387-C2-1-R (2013-2016) and FIRMACARTO CGL2016-80705-R (2016-2019). In addition, this PhD thesis was partly developed in the Integrated Remote Sensing Studio (IRSS) of University of British Columbia (UBC) (Canada) and in the Centre d’Applications et de Recherche en Télédétection of Université de Sherbrooke (Canada) thanks to the Erasmus+ KA-107 mobility grant and to the Canadian research project Assessment of Wood Attributes using Remote Sensing (AWARE) (NSERC CRDPJ-462973-14, grantee N.C. Coops, UBC), respectively