Pasar al contenido principal

MONITORIZACION, DIAGNOSTICO Y CONTROL TOLERANTE A FALLOS DE SISTEMAS CIBERFISICOS CON METODOS BASADOS EN DATOS

DPI2016-76493-C3-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic fault detection observer with H_ performance

  • Wang, Ye
  • Zhou, Meng
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Wang, Zhenhua
Trabajo presentado a la 36th Chinese Control Conference (CCC), celebrada en Dalian (China) del 26 al 28 de julio de 2017., This paper proposes a robust fault detection observer based on zonotopes for discrete-time uncertain systems with sensor faults and unknown but bounded uncertainties. The main advantage of this method is that the observer gain of the robust zonotopic observer is designed to be robust against bounded uncertainties while being sensitive to faults. In order to detect sensor faults with low magnitudes, the fault sensitivity is taken into account by measuring the H_ performance. The designed zonotopic observer gain can be obtained by solving an optimization problem including a sequence of linear matrix inequalities (LMIs). Finally, an illustrative example is provided to demonstrate the proposed method., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R), CICYT HARCRICS (ref. DPI2014-58104-R) and by National Natural Science Foundation of China (Grant No. 61273162, 61403104)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic fault estimation filter design for discrete-time descriptor systems

  • Wang, Ye
  • Wang, Zhenhua
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper considers actuator-fault estimation for discrete-time descriptor systems with unknown but bounded system disturbance and measurement noise. A zonotopic fault estimation filter is designed based on the analysis of fault detectability indexes. To ensure estimation accuracy, the filter gain in the zonotopic fault estimation filter is optimized through the zonotope minimization. The designed zonotopic filter not only can estimate fault magnitudes, but it also provides fault estimation results in an interval, i.e. the upper and lower bounds of fault magnitudes. Moreover, the proposed fault estimation filter has a non-singular structure and hence is easy to implement. Finally, simulation results are provided to illustrate the effectiveness of the proposed method., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R), CICYT HARCRICS (ref. DPI2014-58104-R) and by National Natural Science Foundation of China (Grant No. 61273162, 61403104)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust periodic economic predictive control based on interval arithmetic for water distribution networks

  • Wang, Ye
  • Blesa, Joaquim
  • Puig, Vicenç
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper addresses a robust periodic economic model predictive control (EMPC) based on interval arithmetic with unknown-but-bounded additive disturbances for the management of water distribution networks (WDNs). The system constraints in presence of system disturbances are tightened along the prediction horizon by means of the proposed interval arithmetic and considering that system variables in the WDN model are also subject to some algebraic equations. These algebraic equations should be satisfied when the disturbances have effects on those system variables. The EMPC controller is designed with adding the terminal state constraint. The periodically optimal steady states are obtained by employing a periodic EMPC planner with the nominal model. This periodic steady states are subsequently used to be terminal states. The on-line robust constraint satisfactions are implemented into the robust periodic EMPC controller. Finally, the proposed control strategy is verified using a case study., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reduced-order interval-observer design for dynamic systems with time-invariant uncertainty

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
  • Zhang, Qinghua
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper addresses the design of reduced-order interval-observers for dynamic systems with time-invariant uncertainty. Because of the limitations of using the set-based approach to preserve the time dependency of parameter uncertainty and the wrapping effect to deal with interval-observers, the trajectory-based interval-observer approach is used with an appropriate observer gain. But, there could be some difficulties to satisfy the conditions for selecting a suitable gain to guarantee the positivity of the resulting observer. Then, a reduced-order observer is designed to reduce the computational complexity and to increase the degree of freedom when selecting the observer gain. Finally, a simulation example is employed for illustrating and analyzing the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the communication discussion of two distributed population-game approaches for optimization purposes

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Quijano, Nicanor
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., Population games have become a powerful tool for solving resource-allocation problems in a distributed manner, and for the design of non-centralized optimization-based controllers. The aim of this paper is to illustrate the advantages of two recently introduced population-game approaches in comparison to other classical optimization methods. More specically, the discussion is mainly devoted to the communication requirements. Finally, an illustrative example shows with more detail the advantages highlighted throughout the comparative discussion, i.e., fewer communications links are required for resource allocation problems, and there is not need of additional computation stages to solve the problem in a distributed manner., Authors would like to thank COLCIENCIAS (grant 6172) and the Agencia de Gestio d’Ajust Universitaris i de Recerca, AGAUR, for supporting J. Barreiro-Gomez. Authors would also like to thank the project DEOCS (Ref. DPI2016-76493-C3-3-R), which have partially supported this work., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimal management of barcelona water distribution network using non-linear model predictive control

  • Wang, Ye
  • Cembrano, Gabriela
  • Puig, Vicenç
  • Urrea, Maite
  • Romera, Juli
  • Saporta, David
  • Valero, J. G.
  • Quevedo, Joseba
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., This paper presents a non-linear optimal control strategy for the operational management of water distribution networks (WDNs) including both flow and hydraulic head/pressure constraints. The optimal operation of WDNs should guarantee water supply with suitable pressures at all the demand nodes in the network. The challenge for non-linear model predictive control in this context is to compute control strategies for the pumps and valves in a WDN to supply the required demand while optimizing performance goals related to cost and safety. A two-layer scheme is used in order to produce set-points that can be directly sent to the actuators: on-off schedules for pumps and pressure set-points for pressures reducing valves. Finally, the results of applying the proposed control strategy to a portion of the Barcelona real WDN are provided., This work has been partially funded by the European Union through the project EFFINET (ref. FP7-ICT-2011-8-318556), by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243-C2-1-R), CICYT DEOCS (ref. DPI2016-76493-C3-3-R) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Partitioning for large-scale systems: A sequential distributed MPC design

  • Barreiro-Gómez, Julian
  • Ocampo-Martínez, Carlos
  • Quijano, Nicanor
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., Large-scale systems involve a high number of variables making challenging the design of controllers because of information availability and computational burden issues. Normally, the measurement of all the states in a large-scale system implies to have a big communication network, which might be quite expensive. On the other hand, the treatment of large amount of data to compute the appropriate control inputs implies high computational costs. An alternative to mitigate the aforementioned issues is to split the problem into several sub-systems. Thus, computational tasks may be split and assigned to different local controllers, letting to reduce the required time to compute the control inputs. Additionally, the partitioning of the system allows control designers to simplify the communication network. This paper presents a partitioning algorithm performed by considering an information-sharing graph that can be generated for any control strategy and for any dynamical large-scale system. Finally, a distributed model predictive control (DMPC) is designed for a large-scale system as an application of the proposed partitioning method., This work has been partially supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R). J. Barreiro-Gomez is partially supported by Colciencias and AGAUR., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Periodic nonlinear economic model predictive control with changing horizon for water distribution networks

  • Wang, Ye
  • Salvador, José Ramón
  • Muñoz de la Peña, David
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., A periodic nonlinear economic model predictive control (EMPC) with changing prediction horizon is proposed for the optimal management of water distribution networks (WDNs). The control model of the WDN is built by means of nonlinear differential-algebraic equations in which both the hydraulic pressure and flow variables are taken into account. The model allows the controller to consider minimum pressure constraints at the demands. A periodic terminal constraint is employed in order to guarantee closed-loop stability. The prediction horizon is modified on-line in order to guarantee convergence to the optimal periodic trajectory. The proposed control strategy is verified with the case study of the Richmond water network in a realistic hydraulic simulator. Although there are modeling errors between the control model and hydraulic model, the closed-loop system converges to a sub-optimal periodic trajectory satisfying all the constraints., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243), CICYT DEOCS (ref. DPI2016-76493) and CICYT HARCRICS (ref. DPI2014-58104-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Distributed zonotopic set-membership state estimation based on optimization methods with partial projection

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
Trabajo presentado al 20th IFAC (International Federation of Automatic Control) World Congress, celebrado en Toulouse (Francia) del 9 al 14 de julio de 2017., A distributed set-membership approach is proposed for the state estimation of large-scale systems. The uncertain system states are bounded in a sequence of the distributed set-membership estimators considering unknown-but-bounded system disturbances and measurement noise. In the framework of the set-membership approach, the measurement consistency test is implemented by finding parameterized intersection zonotopes. The size of the intersection zonotope is minimized by solving an optimization problem including a sequence of linear/bilinear matrix inequalities based on the weighted 2-norm criterion of the generator matrix. Meanwhile, for the distributed set-membership estimators, the partial projection method is considered to correct the estimation of the neighbor state. On the other hand, an on-line method is also provided. Finally, the proposed distributed set-membership approach is verified in a case study based on a urban drainage network., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT ECOCIS (ref. DPI2013-48243), CICYT HARCRICS (ref. DPI2014-58104-R) and CICYT DEOCS (ref. DPI2016-76493)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Embedded optimization-based controllers for industrial processes

  • Ibáñez López, Carlos
  • Ocampo-Martínez, Carlos
  • González García, Brais
Trabajo presentado a la IEEE 3rd Colombian Conference on Automatic Control (CCAC), celebrada en Cartagena (Colombia) del 18 al 20 de octubre de 2017., Due to the growth of computational capabilities and the proliferation of field-programmable gate arrays (FPGA), the utilization of model predictive control (MPC) for embedded applications in the industry has become a possibility and a fact. This paper presents and discusses the possibilities of the use of online MPC, embedded in an educational device from National Instruments, using two different optimization algorithms and code generators, which have come out in recent years by the academia: CVXGEN, which implements a primal-dual interior-point algorithm, and qpOASES, which relies on the online active-set strategy algorithm. Both algorithms have been tested both in simulation and in real-time experimentation to control a four-tank pilot plant., This work has been supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish Ministry of Economy and Competitiveness., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dynamic analysis of an ethanol steam reformer for hydrogen production

  • Llerena Pizarro, Omar R.
  • Ocampo-Martínez, Carlos
  • Serra-Prat, María
  • Luz Silveira, José
Trabajo presentado a la IEEE 3rd Colombian Conference on Automatic Control (CCAC), celebrada en Cartagena (Colombia) del 18 al 20 de octubre de 2017., The attempt to improve hydrogen quality has motivated research focused solely on the design of reactors for hydrogen production, paying little interest to their modelling and much less attention to its dynamic analysis. For these main reasons, this paper is focused on the dynamic analysis of a mathematical model of an ethanol steam reformer (ESR) for producing hydrogen. This analysis differs from other nonlinear analyses since it is applied to a specific seventh-order system, while literature presents analyses for at most fourth-order systems. The nonlinear model used is based on mass balances. It is represented by partial differential equations (PDEs), which are converted into ordinary differential equations (ODEs) by the finite-differences method over the space. A general nonlinear dynamic analysis based on equilibrium points and their local stability is carried out by using these ODEs. Dynamic analysis results show that the studied reactor has a stable equilibrium point for a physical-sense range of inputs (ethanol + water), which allow to have available key criteria for the design of control strategies., This work has been supported by the project DEOCS (Ref. DPI2016-76493-C3-3-R) from the Spanish Ministry of Economy and Competitiveness. Omar Llerena has been supported by SENESCYT and the Universidad Politecnica Salesiana., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Computing an inner approximation of the viability kernel using guaranteed integration tubes

  • Codres, Eduard
  • Blesa, Joaquim
  • Martinez Guerrero, Mario
  • Stancu, Alexandru
Trabajo presentado al 10th Summer Workshop on Interval Methods, and 3rd International Symposium on Set Membership - Applications, Reliability and Theory, celebrado en Manchester (UK) del 14 al 16 de junio de 2017., Viability theory is a promising area of research for the design of reliable control systems in the presence of uncertainties and faults. In this work, following the ideas presented in [2], we propose a method to compute the inner and outer approximation of the viability kernel using interval analysis and guaranteed integration techniques., This work has been partially funded by the Ministerio de Economía, Industria y Competitividad (MEICOMP) of the Spanish Government and FEDER through the project DEOCS (ref. DPI2016-76493-C3-3-R) and through the grant IJCI-2014-20801. Thanks to the National Council of Science and Technology (CONACyT) for their support in the realization of this project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Factors influencing the simplified quality model performance

  • Feng, Jing
  • Sun, Congcong
  • Cembrano, Gabriela
  • Puig, Vicenç
During the last few years, the integrated real-time control (RTC) of both the urban sewer network and the wastewater treatment plants (WWTP), has attracted increasingly attention. In order to apply integrated RTC control approach efficiently considering both the hydraulic and quality variables, models, simplified conceptual quality modelling approaches are required. This paper presents research work based on simplified water quality models in sewers, which have been developed in the European project LIFE EFFIDRAIN (Efficient Integrated Real-time Control in Urban Drainage and Wastewater Treatment Plants for Environmental Protection). The contribution of this paper is to analyze the potential factors that would influence the performance of the proposed modelling approach and consequently the corresponding integrated RTC control. A real sewer pilot the Perinot sewer network has been used as case study. Results and conclusions have been provided which would be useful for the users of these models., The authors wish to thank the support received by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), also thank the support from the Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Bordeaux Metropole and Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fault-tolerant control of discrete-time descriptor systems using virtual actuators

  • Wang, Ye
  • Rotondo, Damiano
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Zhao, Yuxin
Trabajo presentado en la 4th Conference on Control and Fault Tolerant Systems (SysTol), celebrada en Casablanca (Marruecos), del 18 al 20 de septiembre de 2019, This paper proposes a fault-tolerant control (FTC) strategy based on virtual actuators for discrete-time descriptor systems subject to multiplicative and additive actuator faults. The goal of this FTC strategy is to reconfigure the closed-loop system by means of a virtual actuator that allows maintaining the use of the nominal controller without having to retune it. To achieve this goal, we define the structure of a dynamical virtual actuator for descriptor systems including multiplicative and additive actuator faults. In order to use a state-feedback controller for implementing the FTC strategy, a state observer for descriptor systems is also defined. Under the proposed FTC scheme, the separation principle of the virtual actuator, the nominal closed-loop system and the state observer is established. Therefore, all the gains can be designed separately. Finally, a numerical example is provided to show the effectiveness of the proposed FTC strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493-C3-3-R), the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and the grant Juan de la Cierva-Formacion (FJCI-2016-29019), and by the ´ Fundamental Research Funds for the Central University (No. 3072019CFJ0406).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Robust zonotopic observer design: Interval observer versus set-membership approaches

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
Trabajo presentado en la 4th Conference on Control and Fault Tolerant Systems (SysTol), celebrada en Casablanca (Marruecos), del 18 al 20 de septiembre de 2019, The aim of this paper is to provide a robust observer design using a Linear Matrix Inequality (LMI) technique along with the analysis and comparison of the interval observer and set-membership approaches within the state estimation framework. The propagation of the uncertainty is taken into account considering a zonotopic-set representation. Both approaches are compared and related using Linear Quadratic Regulator (LQR). Finally, a simulation example based on a three-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach., This work has been partially funded by the Spanish Government (MINECO) through the project DEOCS (ref. DPI2016-76493-C3-3-R), by MINECO and FEDER through the project HARCRICS (ref. DPI2014-58104-R) and by Agencia de Gestio d’Ajuts Universitaris i de Recerca.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detección de fallos en redes de presión pertenecientes a redes de suministro de agua mediante filtros estáticos lineales basados en PCA, Failure Detection on Water Drinking Networks Based on Linear Static Filters and PCA

  • Pereira Martín, Mario
  • Blesa, Joaquim
  • Puig, Vicenç
  • Muñoz de la Peña, David
Trabajo presentado en las XL Jornadas de Automática: Modelado, Simulación y Optimización, celebradas en Ferrol (España), del 4 al 6 de septiembre de 2019, [ES] Este artículo se centra en la elaboración de una serie de modelos estáticos lineales que relacionan los datos de un conjunto de sensores de presión con un subconjunto de ellos que denominaremos base. Gracias a estos modelos se pueden detectar comportamientos anómalos en el funcionamiento de dichos sensores mediante la comparación de los datos reales con los estimados. Para la detección de anomalías en la base se empleará otro subconjunto secundario para su chequeo que denominaremos base secundaria. Como caso de estudio se han utilizado datos almacenados de los sensores de presión de una sección de la red de suministro de aguas de la ciudad de Madrid., [EN] This paper is focused on the design of a set of static and linear models which relate the data of a subset of pressure sensors in a drinking water network with the rest of them. This subset of sensors is called principal base. Thanks to these models wrong behaviours in these devices can be detected comparing real data from sensors with estimated data obtained from these models. In case of fault in a sensor beloning to the principal base, we propose the use of another base, different from the previous one, called secondary base. This second set is needed to detect anomalies in the first one. The proposed methodology was applied to a section of the water drinking network of the city of Madrid, Este trabajo ha sido financiado por los proyectos DPI2016-76493-C3-2-R y DPI2016-76493-C3-3-R del MINECO (España).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

An unknown input moving horizon estimator for open channel irrigation systems

  • Conde, Gregory Johann
  • Quijano, Nicanor
  • Ocampo-Martínez, Carlos
Trabajo presentado en la European Control Conference, celebrada en Delft (Países Bajos), del 29 de junio al 2 de julio de 2021, The use of modeling and estimation strategies appears as a valuable tool to increase the efficiency of the open channel irrigation systems (OCIS). This paper is focused on exploring the feasibility, advantages, and conditions in the implementation of a moving horizon estimation (MHE) approach designed from an approximated model that contemplates mass and energy balances of the channels, which is useful to differentiate when a change of level is a conduction change effect, or when the change is due to an unknown input. The estimation strategy is evaluated via simulation using a test case reported in the literature. The results show that, with the use of the proposed estimation strategy, it is possible to reach an optimal estimation of the total amount of unknown inputs., This research has been supported by Séptima Convocatoria Interna de Investigación de la Universidad Central, Convocatoria Proyectos de Investigación Conjunta Universidad de Ibagu´e-Universidad de los Andes, the CSIC Project MuYSCA (Ref. COOPA20246), and the Project DEOCS DPI2016-76493-C3-3R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

H2 purity control for highpressure alkaline electrolyzers

  • David, Martín
  • Bianchi, Fernando D.
  • Ocampo-Martínez, Carlos
  • Sánchez-Peña, Ricardo S.
Trabajo presentado en el 16th IFAC Symposium on Advanced Control of Chemical Processes ADCHEM 2021, celebrado en Venecia (Italia), del 13 al 16 de junio de 2021, This paper proposes a control strategy that mitigates the cross contamination of H2 and O2 in a high-pressure alkaline electrolyzer, which consequently increases the supplied gases purity. In order to reduce the diffusion of gases through the membrane, the controller establishes the opening of two outlet valves based on the pressure of the system and the difference in liquid level between both separation chambers. Therefore, a multiple input - multiple output optimal controller is designed here. For this purpose, an available high-fidelity model was simplified in order to obtain a control-oriented model. The proposed controller was evaluated in simulation using the high-fidelity nonlinear model in a wide operating range and was compared with a pair of decoupled PI controllers. The resulting impurity of gases was below 1% in all cases., This work has been partially funded by the DEOCS project (DPI2016-76493-C3-3R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A fully data-driven approach for leak localization in water distribution networks

  • Romero Ben, Luis
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Blesa, Joaquim
  • Meseguer, Jordi
Trabajo presentado en la European Control Conference (ECC 2021), celebrada online del 29 de junio al 2 de julio de 2021, This paper presents a data-driven technique for the localization of leaks in water distribution networks (WDN). The methodology requires hydraulic data, i.e., pressure measurements from a set of sensors installed throughout the network and topological information. Therefore, the hydraulic model of the WDN is not necessary for its operation. The hydraulic state of the complete set of nodes of the network is approximated by means of a graph-based interpolation technique. Then, a set of candidates where the leak can be located is achieved by comparing the computed states for both the leaky and nominal cases. The methodology is applied to a case study based on a real network, providing and discussing several graphical results and key performance indicators., The authors want to thank the RIS3CAT Utilities 4.0 SENIX project (COMRDI16-1-0055), as well as the Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Joaquim Blesa is a Serra Hunter Fellow
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A fully data-driven approach for leak localization in water distribution networks

  • Romero Ben, Luis
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
  • Blesa Izquierdo, Joaquim
  • Meseguer Amela, Jordi
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents a data-driven technique for the localization of leaks in water distribution networks (WDN). The methodology requires hydraulic data, i.e., pressure measurements from a set of sensors installed throughout the network and topological information. Therefore, the hydraulic model of the WDN is not necessary for its operation. The hydraulic state of the complete set of nodes of the network is approximated by means of a graph-based interpolation technique. Then, a set of candidates where the leak can be located is achieved by comparing the computed states for both the leaky and nominal cases. The methodology is applied to a case study based on a real network, providing and discussing several graphical results and key performance indicators., The authors want to thank the RIS3CAT Utilities 4.0 SENIX project (COMRDI16-1-0055), as well as the Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the Spanish State Research Agency through the María de Maeztu Seal of Excel, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Set-based replay attack detection in closed-loop systems using a plug & play watermarking approach

  • Trapiello Fernández, Carlos
  • Puig Cayuela, Vicenç
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a watermarking signal injection method that compensates its effect in the loop, avoiding thus the signal reinjection. Similar to a virtual actuator scheme, the proposed methodology masks the presence of the authentication signal to the system controller, that do not need to be retuned as it remains immunized. Furthermore, a set-based analysis concerning the effect that the performance loss imposed by a watermarking signal has in the detectability of a replay attack is performed for the stationary, assuming that a standard state observer is used in order to monitor the plant. Finally, a numerical application example is used to illustrate the proposed approach., This work has been partially funded by the Spanish State ResearchAgency (AEI) and the European Regional Development Fund (ERFD)through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS(ref. MINECO DPI2016-76493) and AGAUR ACCIO RIS3CAT UTILITIES4.0 – P7 SECUTIL. This work has been also supported by the AEI throughthe Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

LPV-MPC control of autonomous vehicles

  • Alcalá Baselga, Eugenio
  • Puig Cayuela, Vicenç
  • Quevedo Casín, Joseba Jokin
In this work, a novel approach is presented to solve the trajectory tracking problem for autonomous vehicles. This method is based on the use of a cascade control where the external loop solves the position control using a novel Linear Parameter Varying - Model Predictive Control (LPV-MPC) approach and the internal loop is in charge of the dynamic control of the vehicle using a LPV - Linear Quadratic Regulator technique designed via Linear Matrix Inequalities (LPV-LMI-LQR). Both techniques use an LPV representation of the kinematic and dynamic models of the vehicle. The main contribution of the LPV-MPC technique is its ability to calculate solutions very close to those obtained by the non-linear version but reducing significantly the computational cost and allowing the real-time operation. To demonstrate the potential of the LPV-MPC, we propose a comparison between the non-linear MPC formulation (NL-MPC) and the LPV-MPC approach., This work has been partially funded by the Spanish Governmentand FEDER through the projects CICYT DEOCS and SCAV (refs.MINECO DPI2016-76493, DPI2017-88403-R). This work has alsobeen partially funded by AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems (SAC) group grant (2017SGR 482), and by AGAUR and the Spanish Research Agencythrough the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model predictive control based on LPV models with parameter-varying delays

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a Model Predictive Control (MPC) strategy based on Linear Parameter Varying (LPV) models with varying delays affecting states and inputs. The proposed control approach allows the controller to accommodate the scheduling parameters and delay change. By computing the prediction of the state variables and delay along a prediction time horizon, the system model can be modified according to the evaluation of the estimated state and delay at each time instant. Moreover, the solution of the optimization problem associated with the MPC design is achieved by solving a series of Quadratic Programming (QP) problem at each time instant. This iterative approach reduces the computational burden compared to the solution of a non-linear optimization problem. A pasteurization plant system is used as a case study to demonstrate the effectiveness of the proposed approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Frequency-based detection of replay attacks: application to a quadrotor UAV

  • Sánchez Corrales, Helem Sabina
  • Rotondo, Damiano
  • Lopez Vidal, Marc
  • Quevedo Casín, Joseba Jokin
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Unmanned aerial vehicles (UAVs) are reported to be highly exposed as possible targets of cyber attacks, due to their strong strategic and economic value, and their increasing use in a wide range of operations. Among the most critical cyber attacks, replay attacks are performed by replacing the real data coming from the sensors with previously recorded data. In this way, the attacker may provoke performance degradation, cause instability, and allow to perform undetectable physical attacks. The main contribution of this paper is to investigate the applicability of a frequency-based detection method, which uses a sine wave with time-varying frequency as authentication signal, to a UAV affected by replay attacks. The effectiveness of the method is illustrated through simulation scenarios., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

H2 purity control for highpressure alkaline electrolyzers

  • David, Martín Rafael
  • Bianchi, Fernando Daniel
  • Ocampo-Martínez, Carlos
  • Sánchez Peña, Ricardo Salvador
This paper proposes a control strategy that mitigates the cross contamination of H2 and O2 in a high-pressure alkaline electrolyzer, which consequently increases the supplied gases purity. In order to reduce the diffusion of gases through the membrane, the controller establishes the opening of two outlet valves based on the pressure of the system and the difference in liquid level between both separation chambers. Therefore, a multiple input - multiple output optimal controller is designed here. For this purpose, an available high-fidelity model was simplified in order to obtain a control-oriented model. The proposed controller was evaluated in simulation using the high-fidelity nonlinear model in a wide operating range and was compared with a pair of decoupled PI controllers. The resulting impurity of gases was below 1% in all cases., This work has been partially funded by the DEOCS project (DPI2016-76493-C3-3R)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control of urban drainage systems: optimal flow control and deep learning in action

  • Ochoa Tamayo, Daniel Esteban
  • Riaño Briceño, Gerardo
  • Quijano Silva, Nicanor
  • Ocampo-Martínez, Carlos
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A hierarchical control strategy is proposed to solve the optimal drainage problem in sewer systems by combining an optimization technique known as minimum scaled consensus control (MSCC) with the deep deterministic policy gradient (DDPG) algorithm. The MSCC strategy operates at the global control level, and is used to determine the flows of the hydraulic structures of the drainage system, such that the water is optimally distributed, i.e., wastewater flows are controlled to minimize saturation of water levels and/or flooding events, filling each of the drainage system components (e.g., pipes, tanks, wastewater treatment plants) proportionally to their capacity. On the other hand, the DDPG uses a model-free approach at the local control level, setting the drainage flows by operating valves and gates, without any knowledge of the inherent dynamics, so that it can be used to handle the nonlinearities of the system. Finally, a case study is presented to show the effectiveness of the proposed strategy. © 2019 American Automatic Control Council., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Tilt angle optimization of photovoltaic panels

  • Rasouli Dogaheh, Zahra
  • Puig Cayuela, Vicenç
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The solar PV power sector in Spain has been developing at a spectacular rate in recent years. The energy cost and the dependence on fossil fuels can be reduced by improving the efficiency of photovoltaic energy production. The performance of a solar radiation conversion system is affected by a tilt angle with the horizontal plane. Thus, the photovoltaic array needs to be tilted at the correct angle to maximize the performance of the system. In this paper, we found the optimum tilt angle and applied for Barcelona, Spain, located at latitude 41o 22' 56'' North and longitude 2o 6'56'' East. The optimal tilt angle for Winter (December, January, February) is 56.46 and the optimum tilt angle for Spring (March, April, May Ls 2 .11°and the optimum tilt angle for Summer(Jun, July, August Ls 13.76° and the optimum tilt angle for Autumn (September, 2ctober, November Ls 8.1 °. finally, the annual optimum tilt angle for our latitude Ls 36.87°, ZLth thLs optimal slope angle, maximum monthly and annual solar radiation is calculated. In this way, we can increase the energy generation when achieved to maximum solar radiation. With this process, we were able to increase 10.54% of energy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Economic MPC-LPV control for the operational management of water distribution networks

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
This paper presents an Economic Model Predictive Control (EMPC) for the operational management of water distribution networks (WDNs) with periodic operation based on embedding the nonlinearity of the model to the Linear Parameter Varying (LPV) model of WDNs. The performance of the WDN is identified by a set of difference-algebraic equations while the relation of hydraulic head/pressure and flow in connected pipes is nonlinear. In particular, the WDN model consists of two sections of nonlinear algebraic equations for bidirectional and unidirectional flows in pipes, respectively. The proposed algorithm is embedded the nonlinear algebraic equations into the LPV model. The proposed control approach allows the controller to accommodate the scheduling parameters. By computing the prediction of the state variables along a prediction time horizon, the system model can be modified according to the evaluation of the estimated state at each time instant. This iterative approach improves the implementation efficiency and reduces the computational burden compared to the solution of a non-linear optimization problem. Finally, the proposed strategy is applied to a well-known benchmark of the Richmond WDN., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

State observer design for quadratic parameter varying (QPV) systems

  • Rotondo, Damiano
  • Johansen, Tor Arne
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper addresses the problem of state observation in quadratic parameter varying (QPV) systems. In particular, a state observer is designed in such a way that the estimation error converges to zero with a desired rate of convergence in a given polytopic region of the error space. Under some assumptions, it is shown that design conditions can be given in the form of a set of bilinear matrix inequalities (BMIs), which can be reduced to linear matrix inequalities (LMIs), which are computationally more tractable. The main characteristics of the proposed approach are illustrated by means of an example, which confirms the validity of the theoretical results., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Robust zonotopic observer design: Interval observer versus set-membership approaches

  • Pourasgharlafmejani, Masoud
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, The aim of this paper is to provide a robust observer design using a Linear Matrix Inequality (LMI) technique along with the analysis and comparison of the interval observer and set-membership approaches within the state estimation framework. The propagation of the uncertainty is taken into account considering a zonotopic-set representation. Both approaches are compared and related using Linear Quadratic Regulator (LQR). Finally, a simulation example based on a three-tank system is employed to both illustrate and discuss the effectiveness of the proposed approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Detection of replay attacks in CPSs using observer-based signature compensation

  • Trapiello Fernández, Carlos
  • Rotondo, Damiano
  • Sánchez Corrales, Helem Sabina
  • Puig Cayuela, Vicenç
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a replay attack detection method that addresses the performance loss of watermarking-based approaches. The proposed method injects a sinusoidal signal that affects a subset, chosen at random, of the system outputs. The presence of the signal in each one of the outputs is estimated by means of independent observers and its effect is compensated in the control loop. When a system output is affected by a replay attack, the loss of feedback of the associated observer destabilizes the signal estimation, leading to an exponential increase of the estimation error up to a threshold, above which the estimated signal compensation in the control loop is disabled. This event triggers the detection of a replay attack over the output corresponding to the disrupted observer. The effectiveness of the method is demonstrated using results obtained with a quadruple-tank system simulator., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault-tolerant control of discrete-time descriptor systems using virtual actuators

  • Wang, Ye
  • Rotondo, Damiano
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
  • Zhao, Yuxin
This paper proposes a fault-tolerant control (FTC) strategy based on virtual actuators for discrete-time descriptor systems subject to multiplicative and additive actuator faults. The goal of this FTC strategy is to reconfigure the closed-loop system by means of a virtual actuator that allows maintaining the use of the nominal controller without having to retune it. To achieve this goal, we define the structure of a dynamical virtual actuator for descriptor systems including multiplicative and additive actuator faults. In order to use a state-feedback controller for implementing the FTC strategy, a state observer for descriptor systems is also defined. Under the proposed FTC scheme, the separation principle of the virtual actuator, the nominal closed-loop system and the state observer is established. Therefore, all the gains can be designed separately. Finally, a numerical example is provided to show the effectiveness of the proposed FTC strategy., © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Energy efficiency improvement of machine tools via peripheral devices management: an optimization-based control approach

  • Diaz Castañeda, Jenny Lorena
  • Ocampo-Martínez, Carlos
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, a control scheme for both reducing the electric power consumption and minimizing power peaks during the operation of machine tools without affecting its throughput is proposed. The controller is designed to only manage peripheral devices without modifying the machining processes and the cycle time of the machine tool. Based on a test bench to emulate the energy consumption of a machine tool, a real data set is used to obtain models of electric power consumption by using data-driven model techniques such as subspace identification. Then, an optimization-based controller is designed considering both power consumption models and operating constraints of peripheral devices. The proposed controller is tested for both nominal and disturbed cases, i.e., with and without disturbances/uncertainties, achieving reductions up to 15% in the power peaks with respect to other control systems usually implemented for such systems. From this approach, both energy cost and economical penalties by overloads could be reduced and the energy efficiency of these machines can be improved. © 2019 American Automatic Control Council., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An unknown input moving horizon estimator for open channel irrigation systems

  • Conde Méndez, Gregory
  • Quijano Silva, Nicanor
  • Ocampo-Martínez, Carlos
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The use of modeling and estimation strategies appears as a valuable tool to increase the efficiency of the open channel irrigation systems (OCIS). This paper is focused on exploring the feasibility, advantages, and conditions in the implementation of a moving horizon estimation (MHE) approach designed from an approximated model that contemplates mass and energy balances of the channels, which is useful to differentiate when a change of level is a conduction change effect, or when the change is due to an unknown input. The estimation strategy is evaluated via simulation using a test case reported in the literature. The results show that, with the use of the proposed estimation strategy, it is possible to reach an optimal estimation of the total amount of unknown inputs., This research has been supported by Septima Convocatoria Interna de Investigacion de la Universidad Central, Convocatoria Proyectos de Investigacion Conjunta Universidad de Ibague-Universidad de los Andes, the CSIC Project MuYSCA (Ref. COOPA20246), and the Project DEOCS DPI2016-76493-C3-3R, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gomez, Samuel
  • López Estrada, Francisco Ronay
  • Valencia Palomo, Guillermo
  • Rotondo, Damiano
  • Enriquez Zarate, Josue
© 2019. Elsevier, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H8 performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Economic reliability-aware MPC-LPV based on chance-constraints programming for water networks *

  • Karimi Pour, Fatemeh
  • Puig Cayuela, Vicenç
  • Cembrano Gennari, Gabriela
This paper proposed an economic reliabilityaware model predictive control (MPC) for the management of drinking water transport networks (DWNs) that includes a new goal to increase the system and components reliability based on a finite horizon stochastic optimization problem with joint probabilistic (chance) constraints. The proposed approach is based on a single-layer economic optimization problem with dynamic constraints. The inclusion of components and system reliability in the MPC model using an LPV modelling approach aims at maximizing the availability of the system by estimating system reliability. The solution of the optimization problem related to the MPC problem is obtained by solving a series of Quadratic Programming (QP) problem. The use of chance-constraint programming allows computing an optimal policy based on a desirable risk acceptability level and managing dynamically volume tank stocks to cope with non-stationary flow demands. Finally, the proposed approach is applied to a part of a real drinking water transport network of Barcelona for demonstrating the performance of the method., Peer Reviewed, Postprint (updated version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis and design of quadratically bounded QPV control systems

  • Rotondo, Damiano
  • Witczak, Marcin
© 2019. Elsevier, A nonlinear system is said to be quadratically bounded (QB) if all its solutions are bounded and this is guaranteed using a quadratic Lyapunov function. This paper considers the QB analysis and state-feedback controller design problems for quadratic parameter varying (QPV) systems. The developed approach, which relies on a linear matrix inequality (LMIs) feasibility problem, ensures that the QB property holds for an invariant ellipsoid which contains a predefined polytopic region of the state space. An example is used to illustrate the main characteristics of the proposed approach and to confirm the validity of the theoretical results., Peer Reviewed, Postprint (author's final draft)