Pasar al contenido principal

IDENTIFICACION DE BARRERAS Y OPORTUNIDADES SOSTENIBLES EN LOS MATERIALES Y APLICACIONES DEL ALMACENAMIENTO DE ENERGIA TERMICA

ENE2015-64117-C5-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT ROVIRA I VIRGILI
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Micro-encapsulated PCM in concrete matrix after a decade of the building construction

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Universidad de Çukurova (Turquía) del 25 al 28 de abril de 2018., The reduction of the energy consumed in the building sector is no more a recommendation, but a duty of our society. Thermal energy storage (TES) implementation into buildings envelope has been highlighted as a promising technology to reduce the energy demand in buildings. Last decade, many literature have been dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia. Several studies focused on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them focused on the long stability properties of the materials with embedded PCM when included in a building, since the lifetime of a building last around 50 years. In this study, an evaluation of a house-like cubicle of concrete with micro-encapsulated PCM after a decade of its construction is done. The results of this study were compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), ULLE10-4E-1305, and ENE2005-08256-C02-01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.