Pasar al contenido principal

RECICLADO DE FIBRAS A PARTIR DE RESIDUOS DE ROPA Y REMANENTES TEXTILES PARA SU APLICACION EN MATERIALES DE CONSTRUCCION SOSTENIBLES

PID2019-108067RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Preliminary study on new micro textile waste fiber reinforced cement composite

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
Large amounts of nonrenewable resources are depleted by the construction industry in addition to the generation of million tons of mineral waste and carbon dioxide gas every year. For the sake of a more sustainable consumption pattern of building materials, as well as for reducing the waste flux to landfills, the use of recycled materials and wastes should be researched and motivated. One of the promising wastes is textile waste from residues of the garments and textile industries. The recycling and reusing of textile waste would be beneficial for reducing CO2 emissions and energy intake. In this sense, there are already some studies regarding the thermal behavior of this type of material, however, the engineering design properties of textile waste fiber reinforced cement composites to identify the proper application have not been deeply investigated. Hence, the objective of this study was to evaluate the potentiality of using textile waste fiber as reinforcement in the cement paste. To this end, the composites with three different treatments were made and the optimum treatment was chosen based on the flexural test. The result is the feasibility of using this kind of fiber as reinforcement of mortar elements with dewatering treatment., This work was supported by the Spanish Government, Ministerio de Ciencia e Innovación [grant number PID2019-108067RB-I00]., Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Characterization of cement composite plates reinforced with nonwovens obtained from technical waste fibres

  • Gónzalez López, Laura
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Ventura Casellas, Heura|||0000-0003-3654-618X
Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Flax fabric-reinforcement lime composite as a strengthening system for masonry materials: study of adhesion

  • Rakhsh Mahpour, Ali|||0000-0002-7968-0250
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Rosell Amigó, Juan Ramón|||0000-0001-5034-8388
The present study was designed to investigate the bond mechanism between flax nonwoven fabric reinforced lime mortars and four different types of masonry stones. The researchers carried out a comprehensive characterization of the mortars and stones, and analyzed the interface between these materials based onbondextensionandflexuralstrength.Theresultsshowedthatbondstrengthvalues were directly related to adherence extension, which was dependent on surface treatment (such as water, lime, and latex). The flexural tests conducted on stones strengthened with the flax nonwoven fabric reinforced lime composite revealed that the latex treatment showed the best performance. This study provides preliminary evidence that the use of flax nonwoven fabric reinforced lime composite maybeaneffective method for masonry strengthening. However, further research is necessary to reach a comprehensive conclusion. Further studies may include an investigation of the effects of different types of latex, the influence of curing conditions on bond strength, and the long-term performance of the strengthening system. The results of this research may have important implications for the conservation and strengthening of historic masonry structures, as well as for the design of new masonry constructions.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam|||0000-0003-2789-4406
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Upcycling fibers from end-of-life clothes & textile remnants for sustainable building materials: closing the loop for a circular economy (Recybuildmat)

  • Ardanuy Raso, Mònica|||0000-0002-9809-2577
  • Claramunt Blanes, Josep|||0000-0003-3546-5943
  • Ventura Casellas, Heura|||0000-0003-3654-618X
Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Characterization of cement composite plates reinforced with nonwovens obtained from technical waste fibres

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Preliminary study on new micro textile waste fiber reinforced cement composite

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
Large amounts of nonrenewable resources are depleted by the construction industry in addition to the generation of million tons of mineral waste and carbon dioxide gas every year. For the sake of a more sustainable consumption pattern of building materials, as well as for reducing the waste flux to landfills, the use of recycled materials and wastes should be researched and motivated. One of the promising wastes is textile waste from residues of the garments and textile industries. The recycling and reusing of textile waste would be beneficial for reducing CO2 emissions and energy intake. In this sense, there are already some studies regarding the thermal behavior of this type of material, however, the engineering design properties of textile waste fiber reinforced cement composites to identify the proper application have not been deeply investigated. Hence, the objective of this study was to evaluate the potentiality of using textile waste fiber as reinforcement in the cement paste. To this end, the composites with three different treatments were made and the optimum treatment was chosen based on the flexural test. The result is the feasibility of using this kind of fiber as reinforcement of mortar elements with dewatering treatment., This work was supported by the Spanish Government, Ministerio de Ciencia e Innovación [grant number PID2019-108067RB-I00]., Objectius de Desenvolupament Sostenible::12 - Producció i Consum Responsables, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Comparing the mechanical performance of flax nonwoven fabric reinforced lime composites modified with two types of lime

  • Rakhsh Mahpour, Ali
  • Ardanuy Raso, Mònica
  • Ventura Casellas, Heura
  • Rosell Amigó, Juan Ramón
  • Claramunt Blanes, Josep
The use of more environmentally friendly materials is gaining increased acceptance in strengthening historic masonry structures. Therefore, using vegetable nonwoven fabric as reinforcement in the lime composite may be a promising solution. This study presents a comparison extensive experimental program carried out on two flax nonwoven fabric reinforced lime composites ( CL-90 and putty CL-90) modified with two kinds of various metakaolin (MK). Laminate plates comprising six layers of fabric impregnated with a lime matrix were created and cured in a CO2 chamber for up to 7 days and both the mechanical (flexural and direct tension) Further and scanning electron microscopy (SEM) was used to complement the analysis of mechanical characterization. The results confirmed that the 6 layers composites with Putty LC-90 lime had a better mechanical performance. The results and outcomes of this study may serve as the basis for future research on these composites and their potential use in structural applications in the building construction and restoration of historical masonry structures, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Durability of eco-friendly strain-hardening cementitious composite incorporating recycled textile waste fabric and silica fume

  • Sadrolodabaee, Payam
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
To reach carbon neutrality, the use of more eco-friendly building materials derived from recycled resources and industrial by-products has been widely encouraged. The use of Portland cement (PC) and concrete as the most used material in the world, after water, ends in the release of million tonnes of CO2 into the atmosphere. On the other hand, fast fashion in the garment industry has resulted in a massive volume of textile waste (TW) that ends up in landfills worldwide. In this regard, a cementitious composite containing industrial by-products as a partial replacement of PC reinforced with recycled TW fibers could be a viable option in terms of both durability and sustainability. In this study, the durability of the hybrid TW/falx nonwoven fabric-reinforced cement composite modified with 30% Silica Fume (SF) was investigated by determining the effect of accelerated wet /dry cycles on the mechanical behavior (through the flexural test) and microstructural characteristics (through scanning and backscat-tered electron microscope). The results show that there was a negligible difference between the mechanical properties of the laminated composite treated with SF with respect to the one without SF in unaged conditions. Nonetheless, after accelerated aging, the fibers in the former could maintain their strength and flexibility, resulting in the composite with better post-cracking mechanical parameters by 40%. © 2022, fib. The International Federation for Structural Concrete. All rights reserved., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cement composite panels reinforced with textile waste and flax nonwoven fabrics: flexural and accelerated aging performance

  • Sadrolodabaee, Payam
  • Ardanuy Raso, Mònica
  • Fuente Antequera, Albert de la
  • Claramunt Blanes, Josep
Towards more eco-friendly building materials, nonwoven fabrics from natural-based (flax) and recycled (textile waste) fibers were produced and incorporated into the cementitious composite panels. The textile waste fibers were recovered from two different clothing sources including fashion and fire-proofing garments. The flexural and durability (through forced wet-dry aging cycles) properties of the laminated sandwich-like cement panels reinforced with four different nonwoven fabrics (flax, treated flax, hybrid fashion textile waste/flax, and fire-proofing textile waste) were analyzed. Based on the results, all four different composites showed promising flexural-hardening behaviors in unaged conditions, especially those reinforced with the treated flax or hybrid fabrics which reached flexural strength of more than 16 MPa and energy ab-sorption index of more than 10 kJ/m2. After wet-dry aging, the post-cracking performance of all composites degraded due to fiber embrittlement, this was more evident for untreated flax composite (reduced by ~65%). Nonetheless, the treated flax fabric composite and hybrid fabric composite containing silica fume could show a better performance after aging., The authors express their gratitude to the Agencia Estatal de Investigación, Spanish Ministry of Economy, Industry, and Competitiveness (Government of Spain) for the financial support received under the scope of the projects RECYBUILDMAT (PID2019-108067RB-I00/AEI/10.13039/501100011033); 3D-Crete (2019PROD00066/IU68-017262-Codi project: J-02696); and CREEF (PID2019-108978RB-C32/AEI/10.13039/501100011033). The first author acknowledges the Banco Santander for the Research Scholarships (Postdoc-UPC 2022 Grant)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Upcycling fibers from end-of-life clothes & textile remnants for sustainable building materials: closing the loop for a circular economy (Recybuildmat)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Flax fabric-reinforcement lime composite as a strengthening system for masonry materials: study of adhesion

  • Rakhsh Mahpour, Ali
  • Claramunt Blanes, Josep
  • Ardanuy Raso, Mònica
  • Rosell Amigó, Juan Ramón
The present study was designed to investigate the bond mechanism between flax nonwoven fabric reinforced lime mortars and four different types of masonry stones. The researchers carried out a comprehensive characterization of the mortars and stones, and analyzed the interface between these materials based onbondextensionandflexuralstrength.Theresultsshowedthatbondstrengthvalues were directly related to adherence extension, which was dependent on surface treatment (such as water, lime, and latex). The flexural tests conducted on stones strengthened with the flax nonwoven fabric reinforced lime composite revealed that the latex treatment showed the best performance. This study provides preliminary evidence that the use of flax nonwoven fabric reinforced lime composite maybeaneffective method for masonry strengthening. However, further research is necessary to reach a comprehensive conclusion. Further studies may include an investigation of the effects of different types of latex, the influence of curing conditions on bond strength, and the long-term performance of the strengthening system. The results of this research may have important implications for the conservation and strengthening of historic masonry structures, as well as for the design of new masonry constructions., Postprint (published version)