Pasar al contenido principal

DESARROLLO DE SENSORES MODULARES DE BAJO COSTE PARA SU USO EN IDENTIFICACION ESTRUCTURAL DE PUENTES SOMETIDOS A CARGAS QUASIESTATICAS

PID2021-126405OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Automatic calibration of structural BIM models applied to bridges

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Atencio, Edison
  • Tošić, Nikola|||0000-0003-0242-8804
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
Building Information Modeling (BIM) enables the creation of digital twins that simulate physical assets like buildings and infrastructure. Achieving an accurate representation of the true structural behavior necessitates calibrating the properties of these virtual models using real on-site measurements. The calibration process holds particular significance for the federated structural model, as on-site damages can potentially compromise crucial mechanical attributes, jeopardizing the asset’s safety and integrity. Although Structural System Identification (SSI) methods can derive actual parameters from on-site measurements, integrating these calibrated properties into BIM models poses challenges. Typically, the calibration process involves manual operations, such as modifying predefined structural databases and updating properties for damaged elements. This manual approach introduces complexities and potential inaccuracies. This paper proposes a novel approach using Robot Process Automation (RPA) to automate the calibration of BIM structural models. The proposed RPA tool automates the generation of new sections in the structural database and the assignment of updated mechanical properties to damaged elements. By leveraging RPA, the integration of SSI results into BIM models can be significantly enhanced, improving interoperability between architectural and structural federated models. Furthermore, this automation supports informed decision-making in structural assessment and maintenance. To validate the proposed tool, a case study is presented involving the calibration of mechanical properties in a real steel bridge. Autodesk software, including Revit and Robot Structural Analysis, is utilized in this case study. The findings demonstrate the effectiveness and potential benefits of the proposed RPA tool in streamlining the calibration process and ensuring the accuracy of BIM structural models., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OBC32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Sustainability and digitalization in bridge management: how far we are?

  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Sustainability and digitalization are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalization are very different in essence and, therefore, the tools needed for their fully adoption in the bridge management environment have to be also different in their basis and formulation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their actual level of sustainability and digitalization. It is shown that although in the technical aspects the final goals are not so far, the human factor (educational and organizational aspects) remains as the critical factor for a full and optimal implementation., The autor thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optimization of prestressing operations in the design of cable-stayed bridges by applying the Direct Algorithm

  • Farré Checa, Josep
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
A new direct simulation of the cantilever erection method is presented in order to reduce the prestressing operations of stay cables. This new method introduces a direct approach for cable-stayed bridge construction using the cantilever erection method, employing independent finite element models. Prestressing forces are modeled as imposed strains based on the unstressed length concept to ensure the achievement of a specific target state post-construction (objective service stage, OSS). This facilitates faster simulation of the construction process, particularly for steel bridges and the predesign of concrete cable-stayed bridges, and enables direct simulation of construction stages and OSS achievement. The proposed method's efficacy is demonstrated through the analysis of a cable-stayed bridge., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/ directed by Professor José Turmo. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

From sensing to action: a digital framework for bridge management

  • Zunino, Leonardo|||0009-0007-5876-1151
  • Gatteschi, Valentina
  • Villa, Valentina
  • Domaneschi, Marco
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
The continuous digitalization of bridge management is transforming how infra- structures are monitored, assessed, and maintained. Despite the availability of sensor data and AI-driven diagnostics, ensuring reliability, transparency, and traceability across the decision- making process remains challenging. This work presents a vision for an integrated, verifiable, and automated bridge management framework that links sensing, assessment, and intervention through emerging digital technologies. Advances in Artificial Intelligence and Machine Learn- ing enable data-driven Structural Health Monitoring for damage detection and quantification under varying conditions. When combined within a Digital Management Environment (DME) compliant with a Digital Twin (DT) framework, these tools support real-time condition assess- ment and predictive maintenance through interaction between physical and virtual assets. To ensure trust and accountability, blockchain is introduced as a tamper-proof layer for certifying data provenance and AI-based decisions. Smart contracts can automate maintenance workflows while preserving human oversight in safety-critical operations., This work was supported by MIUR - PRIN 2022 “BIO-RESTORE” [Prot. 202234HM8J, CUP E53C24002680006]; and it is part of the project “National Recovery and Resilience Plan-Next Generation EU” (PNRR-NGEU) which has received funding from the Italian Ministry of University and Research (MUR) - DM 629/2024. The support of PID2021- 126405OB-C31 and PID2022-140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Temperature field simulation method and average temperature prediction on main cables of suspension bridges

  • Zou, Shuai
  • Ma, Haiying
  • Xia, Ye
  • Wei, Yushuo
  • Wang, Xinyi
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Zhang, Yanan
In order to reduce the construction error caused by the temperature effect during the construction of the main cable of the suspension bridge, this paper determines the key factors that cause the error through theoretical derivation. Through the accurate numerical simulation of the sunshine temperature field of the main cable, the quantitative analysis of the parameter influence of the average temperature error of the main cable section is carried out. According to the parameter fitting and generalization of the error quantization results, the average temperature correction model suitable for different diameter main cables is obtained. The results show that the average temperature correction model can greatly reduce the construction error caused by the temperature effect in the main cable construction project., The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (52478318); Natural Science Foundation of Shanghai (24ZR1469500); Fundamental Research Funds of the Central Universities (2023-2-YB-17); Spanish Ministry of Science and Innovation (PID2021-126405OB-C31)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Accuracy of Ground Penetrating Radar (GPR) in locating post-tensioned cables

  • Mazzatura, Isabella
  • Caprili, Silvia
  • Salvatore, Walter
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
The inspection and assessment of post-tensioned (PT) bridges is a complex issue, first involving the evaluation of the conservation status of the cables. One of the most crucial pieces of information to be confident with is the cables' location since it allows the success of all subsequent tests in the tendons (both non-destructive and destructive) and is critical in the bearing capacity of the beam in bending and shear as well. Many non-destructive techniques (NTDs) are studied and employed by the scientific community and practitioners for the cables' trace determination in PT beams; one of the most promising is the Ground Penetrating Radar (GPR). This technique is commonly employed in the location of metallic elements, both under the ground (pipes, utilities, etc.) and inside the concrete (reinforcements, ducts, etc.). The GPR technology exploits electromagnetic waves typically in the range of 1000-5000 MHz in the inspection of structures and tunnel lines. The variation of electromagnetic properties of the materials results in changes in the speed of travel, attenuation, and redirection of signals. The present research deals with the determination of the GPR accuracy in locating cables in PT structures. A laboratory testing campaign on specially designed samples was conducted for this aim. The tested walls contain both metallic and plastic ducts., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Traffic-informed proof load testing without prior resistance information

  • Addonizio, Gianmarco|||0000-0002-9960-4546
  • Losanno, Daniele
  • Lantsoght, Eva O.L.
  • Casas Rius, Joan Ramon|||0000-0003-4473-4308
Proof load testing (PLT) can be an effective means to proof the load-carrying capacity and structural reliability of existing bridges even when no or weak prior information on structural resistance is available. However, both the design and the interpretation of a successful PLT strongly depend on how the effects of actual traffic loads are modelled. This paper presents a reliability-based methodology for integrating Weigh-In-Motion (WIM) traffic data into PLT design through simplified probabilistic formulations. The resulting reliability-based PLT design charts directly relate the target proof load level to the prescribed target reliability. The proposed framework can be applied both to the design of dedicated proof load tests and to the interpretation of documented traffic loading histories, including permit load events., This study was developed within the CSLLP-ReLUIS project, funded by the Italian High Council of Public Works. The support of PID2021-126405OB-C31 and PID2022-140178OB- I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Long-term performance evaluation of low-cost sensors using AI-driven tools

  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
In civil engineering and architectural applications, Micro Electro-Mechanical System (MEMS) accelerometer-based inclinometers are widely used due to their costeffectiveness. However, a major challenge associated with these devices is their long-term durability and reliability. Typically, commercial inclinometers are employed to calibrate low-cost solutions over time, which ultimately increases monitoring costs and significantly reduces their economic advantages. To address this limitation, this paper presents a novel approach based on Artificial Intelligence (AI) to evaluate the long-term performance of the low-cost inclinometer called LARA (Low-Cost Adaptable Reliable Anglemeter). This AI-driven tool utilizes a Multilayer Perceptron to predict the inclination of a monitored steel structure under real environmental conditions. By comparing the predicted results with actual on-site measurements, potential inaccuracies in the low-cost inclinometer can be automatically detected, indicating the need for recalibration. The effectiveness and applicability of the proposed tool are demonstrated through a study conducted on a real steel frame located in Spain. This study demonstrates how the AI-based approach can enhance the assessment of the low-cost inclinometer’s performance and its suitability for long-term monitoring of real structures., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OBC32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and National Natural Science Foundation of China (52278313).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Temperature field simulation method and average temperature prediction on main cables of suspension bridges

  • Zou, Shuai
  • Ma, Haiying
  • Xia, Ye
  • Wei, Yushuo
  • Wang, Xinyi
  • Komarizadehasl, Seyedmilad
  • Zhang, Yanan
In order to reduce the construction error caused by the temperature effect during the construction of the main cable of the suspension bridge, this paper determines the key factors that cause the error through theoretical derivation. Through the accurate numerical simulation of the sunshine temperature field of the main cable, the quantitative analysis of the parameter influence of the average temperature error of the main cable section is carried out. According to the parameter fitting and generalization of the error quantization results, the average temperature correction model suitable for different diameter main cables is obtained. The results show that the average temperature correction model can greatly reduce the construction error caused by the temperature effect in the main cable construction project., The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (52478318); Natural Science Foundation of Shanghai (24ZR1469500); Fundamental Research Funds of the Central Universities (2023-2-YB-17); Spanish Ministry of Science and Innovation (PID2021-126405OB-C31)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integration of BIM and MIVES to automate the sustainability assessment of viaducts

  • Lozano Galant, Fidel
  • Jurado, Julio Cesar
  • Fuente Antequera, Albert de la
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Among the multicriteria decision-making (MCDM) methods, the Integrated Value Model for Sustainability Assessment (MIVES) stands out for its ability to quantitatively assess sustainability of civil and construction engineering projects. The integration of this method with building information modeling (BIM) offers a holistic approach to construction project management, this allowing promoting better decision-making, collaboration, and ultimately, more successful and efficient construction projects. While literature explores the link between BIM and MIVES, efforts often lack consistent sustainability assessment automation. Current approaches mainly define MIVES indicators within the BIM model, without achieving a comprehensive evaluation automation. To address this issue, a novel methodology that combines MIVES and BIM is presented to automate the sustainability assessment. The proposed methodology automates the sustainability analysis of BIM digital twin in Revit using quantity tables and internal operators. In addition, a parametric programming tool in Dynamo is developed for direct MIVES and BIM coupling. The approach is validated using a real viaduct to assess sustainability and perform a sensitivity analysis in order to identify those indicators with the most influence on sustainability performance. Critically, this methodology is not limited to the sustainability assessment of bridges as it can be readily adapted to other types of infrastructure. Moreover, it is worth noting that the capabilities of this approach can be significantly augmented by incorporating data from sensors and diverse sources. This inclusion of sensor-derived or alternative data sources enhances the depth and accuracy of the insights drawn from the integrated MCDM-BIM framework., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB- C32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Sustainability and digitalization in bridge management: how far we are?

  • Casas Rius, Joan Ramon
Sustainability and digitalization are two main topics in many research programs in Europe and worldwide. It seems that bridge managers can largely benefit from the current digital transformation where processes using digital technologies are able to create new or to enhance existing bridge management systems (BMS). The concepts of sustainability and digitalization are very different in essence and, therefore, the tools needed for their fully adoption in the bridge management environment have to be also different in their basis and formulation. For an optimal adoption and development of both topics, also the actual trends in the bridge management policies, as performance-based decision making and adaptive BMS should be considered. This paper analyzes the actual bridge management policies, trying to evaluate their actual level of sustainability and digitalization. It is shown that although in the technical aspects the final goals are not so far, the human factor (educational and organizational aspects) remains as the critical factor for a full and optimal implementation., The autor thanks the support given by Grant PID2021-126405OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study on the failure process of large shear key joints based on NDT methods

  • Li, Shengtao
  • Casas Rius, Joan Ramon
  • Chen, Xudong
  • Sun, Yangyang
  • Liu, Duo
Dry joints with keys are often used in precast concrete segmental bridges (PCSBs) to transfer shear stresses. Large dry joints with keys can often provide greater shear bearing capacity, which can meet the needs of rapid construction and simple assembly. This study focuses on the shear response of super-sized dry joints with keys under direct shear. Various monitoring methods, including digital image correlation (DIC) and distributed optical fiber sensing (DFOS), were used to systematically study the stress process of large concrete keys. The results show that as the size of the key teeth increases, the shear bearing capacity and ultimate vertical displacement of the specimens also increase. DIC and DFOS techniques provide detailed information on key tooth failure, which is beneficial for subsequent stress analysis of shear keys., The authors acknowledge the support provided by the Spanish Ministry of Science and Innovation through the research project PID2021-126405OB-C31 and AGAUR (Government of Catalonia) for support to consolidated re-search groups, and CSC scholarship of China (202206710009)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

From sensing to action: a digital framework for bridge management

  • Zunino, Leonardo
  • Gatteschi, Valentina
  • Villa, Valentina
  • Domaneschi, Marco
  • Casas Rius, Joan Ramon
The continuous digitalization of bridge management is transforming how infra- structures are monitored, assessed, and maintained. Despite the availability of sensor data and AI-driven diagnostics, ensuring reliability, transparency, and traceability across the decision- making process remains challenging. This work presents a vision for an integrated, verifiable, and automated bridge management framework that links sensing, assessment, and intervention through emerging digital technologies. Advances in Artificial Intelligence and Machine Learn- ing enable data-driven Structural Health Monitoring for damage detection and quantification under varying conditions. When combined within a Digital Management Environment (DME) compliant with a Digital Twin (DT) framework, these tools support real-time condition assess- ment and predictive maintenance through interaction between physical and virtual assets. To ensure trust and accountability, blockchain is introduced as a tamper-proof layer for certifying data provenance and AI-based decisions. Smart contracts can automate maintenance workflows while preserving human oversight in safety-critical operations., This work was supported by MIUR - PRIN 2022 “BIO-RESTORE” [Prot. 202234HM8J, CUP E53C24002680006]; and it is part of the project “National Recovery and Resilience Plan-Next Generation EU” (PNRR-NGEU) which has received funding from the Italian Ministry of University and Research (MUR) - DM 629/2024. The support of PID2021- 126405OB-C31 and PID2022-140178OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Residual service life of a deteriorated retaining wall near the Terrassa railway station based on evidence

  • Casas Rius, Joan Ramon
  • Alegre Heitzmann, Vicente
  • Comellas Oliva, Josep
A part of the retaining earth wall of the main line of the Catalonian railways (FGC), close to the station of Terrassa collapsed abruptly and without any previous warning. The collapse of this part of the wall provoked the disruption of the operation of trains for three days due to the difficulties in the debris removal. The re-construction of the wall lasted several months. After investigation, it became evident that the failure was due to the pit corrosion of the main reinforcement due to the leakage of a pipeline containing water with chlorides (drinking water network). From the results of the investigation, the main parameters related to the durability of the concrete in the wall were deduced. Once the failed section of the wall was refurbished, it was possible the inspection of the condition state of the reinforce-ment mainly in the rest of the wall (around 100 meters), removing extrados land. The assessment of the actual state and remaining service life of the rest of the retaining earth wall was carried out based on the different behaviour of each part, due to the different leakage in relation to the failed section. Based on this evidence, the residual service life of the rest of the wall was estimated as adequate during the remaining years of railway operation, The second author acknowledges the financial support provided by the Spanish Ministry of Science and Innovation through the research project PID2021-126405OB-C31 and AGAUR (Government of Catalonia) for the support to consolidated research groups., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Automatic calibration of structural BIM models applied to bridges

  • Lozano Galant, Fidel
  • Atencio, Edison
  • Tošić, Nikola
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
Building Information Modeling (BIM) enables the creation of digital twins that simulate physical assets like buildings and infrastructure. Achieving an accurate representation of the true structural behavior necessitates calibrating the properties of these virtual models using real on-site measurements. The calibration process holds particular significance for the federated structural model, as on-site damages can potentially compromise crucial mechanical attributes, jeopardizing the asset’s safety and integrity. Although Structural System Identification (SSI) methods can derive actual parameters from on-site measurements, integrating these calibrated properties into BIM models poses challenges. Typically, the calibration process involves manual operations, such as modifying predefined structural databases and updating properties for damaged elements. This manual approach introduces complexities and potential inaccuracies. This paper proposes a novel approach using Robot Process Automation (RPA) to automate the calibration of BIM structural models. The proposed RPA tool automates the generation of new sections in the structural database and the assignment of updated mechanical properties to damaged elements. By leveraging RPA, the integration of SSI results into BIM models can be significantly enhanced, improving interoperability between architectural and structural federated models. Furthermore, this automation supports informed decision-making in structural assessment and maintenance. To validate the proposed tool, a case study is presented involving the calibration of mechanical properties in a real steel bridge. Autodesk software, including Revit and Robot Structural Analysis, is utilized in this case study. The findings demonstrate the effectiveness and potential benefits of the proposed RPA tool in streamlining the calibration process and ensuring the accuracy of BIM structural models., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OBC32 funded by MICIN/AEI/10.13039/501100011033/ and FEDER funds A way to make Europe. The financial support of the project F-00528 (PLEC2022-009441) with the title “Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)” is also appreciated., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost technologies for monitoring timber structures

  • Lozano Galant, Fidel
  • González-Arteaga, Jesús
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Komarizadehasl, Seyedmilad
In recent years, wood has gained recognition as a construction material due to technological advancements and environmental concerns. However, wood's organic nature presents several peculiarities, such as variability in physical and mechanical properties, anisotropy, and susceptibility to biotic and abiotic deterioration. To assess and ensure the safety and longevity of timber constructions, multiple monitoring solutions have been proposed in the literature, but their usual high cost limit its applicability in conventional constructions. In the last decade, low-cost sensors are gaining attention in multiple fields to reduce monitoring costs. Despite this interest, no review of the current state of research on the application of low-cost sensor technologies for monitoring timber structures has been presented. This paper aims to fill this gap by providing a comprehensive review of the technologies and sensors used in the literature and identifying avenues for future research in this area., The authors are indebted to the projects PID2021-126405OB-C31, and PID2021-126405OB-C32 funded by MICIN/AEI/501100011033/ and FEDER funds A way to make Europe. The financial suport of the project F-00528 (PLEC2022-009441) withe the title "Optimización topológica para una metodología de construcción de bajo impacto ambiental (Topological optimization for a low environmental impact construction methodology)" is also appreciated., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Accuracy of Ground Penetrating Radar (GPR) in locating post-tensioned cables

  • Mazzatura, Isabella
  • Caprili, Silvia
  • Salvatore, Walter
  • Casas Rius, Joan Ramon
The inspection and assessment of post-tensioned (PT) bridges is a complex issue, first involving the evaluation of the conservation status of the cables. One of the most crucial pieces of information to be confident with is the cables' location since it allows the success of all subsequent tests in the tendons (both non-destructive and destructive) and is critical in the bearing capacity of the beam in bending and shear as well. Many non-destructive techniques (NTDs) are studied and employed by the scientific community and practitioners for the cables' trace determination in PT beams; one of the most promising is the Ground Penetrating Radar (GPR). This technique is commonly employed in the location of metallic elements, both under the ground (pipes, utilities, etc.) and inside the concrete (reinforcements, ducts, etc.). The GPR technology exploits electromagnetic waves typically in the range of 1000-5000 MHz in the inspection of structures and tunnel lines. The variation of electromagnetic properties of the materials results in changes in the speed of travel, attenuation, and redirection of signals. The present research deals with the determination of the GPR accuracy in locating cables in PT structures. A laboratory testing campaign on specially designed samples was conducted for this aim. The tested walls contain both metallic and plastic ducts., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Long-term performance evaluation of low-cost sensors using AI-driven tools

  • Lozano Galant, Fidel
  • Emadi, Seyyedbehrad
  • Komarizadehasl, Seyedmilad
  • González-Arteaga, Jesús
  • Xia, Ye
  • Lozano Galant, José Antonio
In civil engineering and architectural applications, Micro Electro-Mechanical System (MEMS) accelerometer-based inclinometers are widely used due to their costeffectiveness. However, a major challenge associated with these devices is their long-term durability and reliability. Typically, commercial inclinometers are employed to calibrate low-cost solutions over time, which ultimately increases monitoring costs and significantly reduces their economic advantages. To address this limitation, this paper presents a novel approach based on Artificial Intelligence (AI) to evaluate the long-term performance of the low-cost inclinometer called LARA (Low-Cost Adaptable Reliable Anglemeter). This AI-driven tool utilizes a Multilayer Perceptron to predict the inclination of a monitored steel structure under real environmental conditions. By comparing the predicted results with actual on-site measurements, potential inaccuracies in the low-cost inclinometer can be automatically detected, indicating the need for recalibration. The effectiveness and applicability of the proposed tool are demonstrated through a study conducted on a real steel frame located in Spain. This study demonstrates how the AI-based approach can enhance the assessment of the low-cost inclinometer’s performance and its suitability for long-term monitoring of real structures., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OBC32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, and National Natural Science Foundation of China (52278313)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimization of prestressing operations in the design of cable-stayed bridges by applying the Direct Algorithm

  • Farré Checa, Josep
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
A new direct simulation of the cantilever erection method is presented in order to reduce the prestressing operations of stay cables. This new method introduces a direct approach for cable-stayed bridge construction using the cantilever erection method, employing independent finite element models. Prestressing forces are modeled as imposed strains based on the unstressed length concept to ensure the achievement of a specific target state post-construction (objective service stage, OSS). This facilitates faster simulation of the construction process, particularly for steel bridges and the predesign of concrete cable-stayed bridges, and enables direct simulation of construction stages and OSS achievement. The proposed method's efficacy is demonstrated through the analysis of a cable-stayed bridge., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds A way to make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/ directed by Professor José Turmo. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112)., Postprint (published version)