Pasar al contenido principal

MEZCLAS DE ALTO RENDIMIENTO MECANICO A PARTIR DE ECO-POLIMEROS Y RESIDUOS DE CAUCHO.

PID2023-151338NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE CATALA DEL PLASTIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Ionic conductive bio-based composite aerogels

  • Amenta, Serena
  • Cruz Jesús, Lucía Guadalupe de la|||0000-0001-9009-4503
  • Abt, Tobias Martin|||0000-0002-4351-8155
  • León Albiter, Noel|||0000-0003-1061-8552
  • Lamberti, Andrea
  • Marchese, Leonardo
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
In the realm of energy transition, significant advancements are essential on the improvement of energy storage performance as well as in sustainability and safety. Aerogels are lightweight materials that can be endowed with mechanical strength, thermal insulation capability, and fire resistance. These characteristics make them promising for electrochemical devices such as composite polymer electrolytes (CPE). Silica-based aerogels have been used as scaffolds for solid polymer electrolytes (SPE). In these applications, the aerogel not only provides structural support but also creates additional conduction channels that improve ionic conductivity (IC). In this work, we present a bio-based aerogel composed of gelatin, montmorillonite clay, and tannic acid, synthesized using water as a solvent. By employing an ice templating strategy, we achieved a 1D pore orientation, which provides more direct conduction pathways. This aerogel exhibits an axially oriented honeycomb porous structure with high porosity (92.9 ± 0.1%) and low density (0.130 ± 0.002 g/cm³). It is also categorized as a self-extinguishing material. This aerogel was infiltrated with a SPE consisting of Polyethylene glycol (PEG) and Lithium bis (trifluoromethanesulfonyl) imide (LiTFSI). With partial pore coverage, we achieved IC at room temperature on the order of 2 × 10-7 S/cm. This led to promising results, resulting in a porous (76%) ionic conductive aerogel that opens new perspectives. It enables the creation of a low-density solid electrolyte, which can increase the specific capacity of the final device. Alternatively, it can serve as an active, fire resistant, scaffold for a liquid or gel electrolyte, enhancing and maximizing IC., Los autores agradecen la ayuda recibida por el proyecto EcoPolyRub PID2023-151338NB-I00 financiado por MCIU/ AEI / 10.13039/501100011033 / FEDER, UE. Igualmente agradecen la ayuda recibida de la Generalitat de Catalunya en la convocatoria 2021SGR01042. Serena Amenta agradece la financiación recibida por MUR – DM 352/2022 a través del proyecto PNRR- NGEU.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas|||0000-0002-1559-8696
  • Fernández Renna, Ana Inés
Shape-stabilized phase change materials (SSPCMs) combine the high energy density of solid-to-liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room-temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed, 7 - Energia Assequible i No Contaminant, 9 - Indústria, Innovació i Infraestructura, 13 - Acció per al Clima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.