Pasar al contenido principal

MEZCLAS DE ALTO RENDIMIENTO MECANICO A PARTIR DE ECO-POLIMEROS Y RESIDUOS DE CAUCHO.

PID2023-151338NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE CATALA DEL PLASTIC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative packaging from vine shoots: a circular economy solution based on cellulosic aerogels for the wine industry using PLA as reinforcement

  • García-Abril, Paula
  • López-Rubio, Amparo
  • Sánchez-Soto, Miguel
  • García-Fernández, Luis
  • Benito-González, Isaac
: With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Highly porous, lightweight aerogels were developed based on cellulose extracted via industrial Kraft treatments from vine shoot (S) with the aim of valorising a currently generated waste and eucalyptus (EU) to reduce seasonality. In order to enhance their hydrophobicity and mechanical resistance, a poly-lactic acid (PLA) coating was applied through two different methodologies: spray- and pipette-coating. The resulting materials presented low densities (23-80 kg/m3) with improved mechanical performance, revealing a notable augment in compressive strength after PLA coating (up to 20-fold increase, reaching 1.54 N/cm2), while maintaining low thermal conductivity values around 0.0305 W/mK. These results highlight the potential of the developed aerogels as sustainable and biodegradable protective packaging for wine bottles, offering a balance between thermal insulation, mechanical performance, and circular economy benefits., The authors would like to thank funding derived from the VINEBOX project (IDI-20221020) granted by CDTI. Isaac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI10.13039/501100011033 is also fully acknowledged. Miguel Sánchez-Soto acknowledges the EcoPolyRub Project: PID2023-151338NB-I00, funded by the Ministry of Science, Innovation and Universities, the State Research Agency, and the European Regional Development Fund (FEDER). Also acknowledges the support received from the Generalitat of Catalonia through the project 2021SGR01042., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the microstructure of cellulosic porous materials: foams, cryogels and aerogels

  • Pérez Ochando, Jorge
  • Sánchez Soto, Miguel
  • Benito González, Isaac
The massive use of plastic materials derived from fossil fuels and their consequent environmental accumulation have driven the search for more sustainable alternatives. Among them, biopolymer-based materials such as cellulose stand out, as they are not only abundant and renewable but also readily available from lignocellulosic waste, promoting a circular economy. This study analyses porous structures derived from vine shoots’ waste biomass, specifically foams and aerogels obtained via freeze-drying and supercritical CO<inf>2</inf> drying. Parameters such as density (15–70 mg/cm<sup>3</sup>), shrinkage (15–75%), microstructure (wide range of pore sizes up to 3 µm, surface area up to 67 m<sup>2</sup>/g), mechanical strength (up to 37 N/cm<sup>2</sup>), and thermal conductivity (29–36 mW/mK) were evaluated to determine the most optimal ones in terms of performance and cost-effectiveness. Finally, the efficiency of polylactic acid (PLA) as a reinforcement was examined to improve the hydrophobicity and sorption capacity (between 5 and 20 g water/g in sorption capacity measurements) and mechanical strength (up to sixfold) of the materials, making them more competitive in various applications., saac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI / 10.13039/501100011033 is also fully acknowledged. Miguel Sánchez-Soto acknowledges the research support given through the project EcoPolyRub PID2023-151338NB-I00 financed by MCIU/AEI/10.13039/501100011033/FEDER, UE, and also to the Generalitat de Catalunya (2021SGR01042). This work is also part of María de Maeztu Unit of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S). With funding from the Spanish government through the ‘María de Maeztu Unit of Excellence’ accreditation (CEX2023-001300-M)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Designing natural rubber shape stabilized phase change materials: impact of matrix network on thermophysical properties

  • Neira Viñas, Marc
  • Candau, Nicolas|||0000-0002-1559-8696
  • Fernandez, Ana Ines
Shape-stabilized phase change materials (SSPCMs) have been a promising thermal energy storage (TES) solution to combine the high energy density of solid-to-liquid (SL) PCMs and the structural stability of solid–solid PCMs. Although polymeric matrices have been used for their reduced cost and ease of processability, few have evaluated the use of crosslinked natural rubber (NR). In this study, we evaluate by differential scanning calorimetry (DSC) the preparation of room-temperature tailorable SSCPMs by the design of NR matrices with different crosslink density vulcanized by dicumyl peroxide (DCP) or sulphur, with special focus on the quantification of the content of PCM. The results indicate that the amount of PCM stable in the NR matrix is low, with PCM contents between 16 and 24% and enthalpies between 16 and 20 J·g-1. Likewise, it is well-known that thermophysical properties of the PCMs vary upon confinement in a small-scale porous matrix. The confinement of the PCM in the rubber network results in a measured enthalpy below the expected value, and a melting point depression of up to 23.6 °C, dependent on crosslink density. These results highlight the structural complexity of NR-PCM composites and the need for further investigation., The authors would like to thank the Catalan Government for the quality accreditation and funding given to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polι´mers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). DIOPMA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. A.I. Fernández and M. Neira-Viñas acknowledge the project PID2024-159867OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. N. Candau acknowledges the project EcoPolyRub PID2023-151338NB-I00 funded by the Ministerio de Ciencia, Innovación y Universidades (MICIU), the Agencia Estatal de Investigación (AEI) and the FEDER funds. This work is part of María de Maeztu Units of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Ionic conductive bio-based composite aerogels

  • Amenta, Serena
  • Cruz Jesús, Lucía Guadalupe de la|||0000-0001-9009-4503
  • Abt, Tobias Martin|||0000-0002-4351-8155
  • León Albiter, Noel|||0000-0003-1061-8552
  • Lamberti, Andrea
  • Marchese, Leonardo
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
In the realm of energy transition, significant advancements are essential on the improvement of energy storage performance as well as in sustainability and safety. Aerogels are lightweight materials that can be endowed with mechanical strength, thermal insulation capability, and fire resistance. These characteristics make them promising for electrochemical devices such as composite polymer electrolytes (CPE). Silica-based aerogels have been used as scaffolds for solid polymer electrolytes (SPE). In these applications, the aerogel not only provides structural support but also creates additional conduction channels that improve ionic conductivity (IC). In this work, we present a bio-based aerogel composed of gelatin, montmorillonite clay, and tannic acid, synthesized using water as a solvent. By employing an ice templating strategy, we achieved a 1D pore orientation, which provides more direct conduction pathways. This aerogel exhibits an axially oriented honeycomb porous structure with high porosity (92.9 ± 0.1%) and low density (0.130 ± 0.002 g/cm³). It is also categorized as a self-extinguishing material. This aerogel was infiltrated with a SPE consisting of Polyethylene glycol (PEG) and Lithium bis (trifluoromethanesulfonyl) imide (LiTFSI). With partial pore coverage, we achieved IC at room temperature on the order of 2 × 10-7 S/cm. This led to promising results, resulting in a porous (76%) ionic conductive aerogel that opens new perspectives. It enables the creation of a low-density solid electrolyte, which can increase the specific capacity of the final device. Alternatively, it can serve as an active, fire resistant, scaffold for a liquid or gel electrolyte, enhancing and maximizing IC., Los autores agradecen la ayuda recibida por el proyecto EcoPolyRub PID2023-151338NB-I00 financiado por MCIU/ AEI / 10.13039/501100011033 / FEDER, UE. Igualmente agradecen la ayuda recibida de la Generalitat de Catalunya en la convocatoria 2021SGR01042. Serena Amenta agradece la financiación recibida por MUR – DM 352/2022 a través del proyecto PNRR- NGEU.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

DLP 3D cell bioprinting of gelatin methacryloyl–tannic acid hydrogels as a tunable platform for bioactive skin tissue engineering scaffolds

  • Resina, Maria Leonor Matos|||0000-0003-4216-8349
  • Pérez Madrigal, Maria del Mar|||0000-0002-2498-8485
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Although 3D cell bioprinting has emerged as a powerful strategy for engineering biomimetic skin substitutes and wound-related materials, the development of bioinks that simultaneously provide structural integrity, cytocompatibility, and bioactivity remains challenging. In this work, gelatin methacryloyl (GelMA)–based hydrogels incorporating tannic acid (TA) were developed and processed via digital light processing to fabricate 3D scaffolds as prototype platforms for skin-related applications. The incorporation of TA significantly enhanced hydrogel stability, mechanical stiffness, and antibacterial activity, while maintaining high water content and improving print fidelity. Structural characterization by SEM and micro-CT revealed that TA promoted the formation of a more compact and homogeneous porous network, consistent with increased storage modulus, improved compressive strength and delayed degradation under physiological conditions. Rheological analysis confirmed that GelMA+TA systems exhibit enhanced viscoelastic stability and resistance to deformation. Sustained TA release over 25 days endowed the scaffolds with antibacterial activity against E. coli and S. aureus. Importantly, 3D bioprinting and encapsulation studies demonstrated cell–type–dependent biological responses. Human skin fibroblasts exhibited robust long-term viability and proliferation within pure GelMA scaffolds, while TA-containing hydrogels promoted early cell–material interactions and fibronectin deposition but were associated with reduced long-term fibroblast proliferation, suggesting a dose- and exposure-dependent effect of TA. In contrast, Vero cells, used as a model epithelial cell line, showed improved viability and morphology under encapsulation conditions in GelMA+TA scaffolds. These results highlight the critical interplay between macromolecular composition, 3D microenvironment, and cell response, demonstrating that GelMA+TA systems represent a promising preliminary platform for the development of tunable bioactive scaffolds for wound-related applications., This publication is part of the I + D + i projects PID2024-157506OB-I00, PID2021-125767OB-I00, PDC2025-165847-I00, and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033. Authors would like to thank the Agència de Gestió d'Ajuts Universitaris i de Recerca (2021 SGR 00387) for financial support. Support for the research of C.A. was also received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Elastómeros elastocalóricos: cauchos y poliuretanos como casos de estudio

  • Candau, Nicolas|||0000-0002-1559-8696
El efecto elastocalórico en elastómeros poliméricos se basa en el intercambio reversible de calor asociado a la deformación mecánica, y está estrechamente ligado a la orientación de cadenas y a la cristalización inducida por deformación. En este trabajo se presenta una comparación entre dos sistemas representativos: el caucho natural (NR), considerado un material modelo para el estudio de la cristalización bajo deformación, y los poliuretanos-urea termoplásticos basados en óxido de politetrametileno (TPUU-PTMO), como alternativa sintética con elevada versatilidad de diseño y procesado. Se analizan las similitudes y diferencias en microestructura, propiedades mecánicas y respuesta térmica, poniendo de manifiesto el papel clave de la cristalización inducida y de la orientación de las cadenas amorfas en el refuerzo mecánico y en la magnitud del efecto elastocalórico. Finalmente, se discuten las implicaciones tecnológicas de ambos sistemas para el desarrollo de dispositivos de refrigeración en estado sólido basados en polímeros., The elastocaloric effect in polymeric elastomers relies on the reversible heat exchange associated with mechanical deformation and is closely related to chain orientation and strain-induced crystallization. In this work, a comparative analysis is presented between two representative systems: natural rubber (NR), considered as a model material for strain-induced crystallization, and thermoplastic polyurethane-urea elastomers based on polytetramethylene oxide (TPUU-PTMO), as a synthetic alternative offering high versatility in material design and processing. Similarities and differences in microstructure, mechanical properties and thermal response are discussed, highlighting the key role of straininduced crystallization and amorphous chain orientation in mechanical reinforcement and in the magnitude of the elastocaloric effect. Finally, technological implications for the development of solid-state cooling devices based on polymers are addressed., Los autores agradecen al grupo eb-POLICOM: Polímeros y Compuestos Ecológicos y Biode- gradables, grupo de investigación recono- cido por la Generalitat de Catalunya (Grant 2021 SGR 01042). Asimismo, se agradece el apoyo del proyecto EcoPolyRub PID2023- 151338NB-I00, financiado por el Ministerio de Ciencia, Innovación y Universidades (MICIU), la Agencia Estatal de Investigación (AEI) y los fondos FEDER. Este trabajo forma parte del Programa de Unidades de Excelencia María de Maeztu CEX2023-001300-M, financiado por MICIU/AEI /10.13039/501100011033/., Peer Reviewed, 12 - Producció i Consum Responsables, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Deformation and failure mechanisms of natural/waste rubber blends under mechanical and thermal cycles: a synchrotron in situ study

  • Uliana, Samuele
  • Candau, Nicolas|||0000-0002-1559-8696
  • Arioli, Matteo|||0000-0001-7641-4881
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Maspoch Rulduà, M. Lluïsa|||0000-0002-4813-6412
This study investigates the deformation and failure mechanisms of natural rubber (NR) and waste rubber blends under mechanical and thermal cycles using in situ synchrotron wide-angle X-ray diffraction (WAXD). The incorporation of ground tire rubber (GTR) into NR enhances strain-induced crystallization (SIC), reducing the onset strain for crystallization and increasing mechanical reinforcement. Cyclic loadings reveal significant hysteresis and residual deformation, influenced by GTR content. Moreover, the strain at complete melting of SIC crystals is found to decrease with GTR content, suggesting a higher stability of SIC crystals. Under combined tensile stress and high temperature, NR/GTR blends exhibit failure likely due to decohesion at the NR/GTR interface and growth of cavities in the NR matrix. Nonetheless, the temperature at fracture is increased by 15°C with the GTR content at a strain of 300%. As SIC crystals promote resistance to crack growth, failure is delayed under high stress and temperature owing to the nucleating effect of GTR on SIC. In spite of the limitations imposed by the interface between NR and GTR, the study highlights the role of GTR in the promotion of SIC in reinforcing NR-based composites., The authors acknowledge the group eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, a research group of the Generalitat de Catalunya (Grant 2021 SGR 01042). These experiments were performed at BL11-NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff, Marc Malfois, and Cristian Huck Iriart. We acknowledge the project EcoPolyRub PID2023-151338NB-I00 funded by the Ministerio de Ciencia, Innovación y Universidades (MICIU), the Agencia Estatal de Investigación (AEI), and the FEDER funds. This work is part of María de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors acknowledge the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Innovative packaging from vine shoots: a circular economy solution based on cellulosic aerogels for the wine industry using PLA as reinforcement

  • García Abril, Paula
  • López Rubio, Amparo
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
  • García Fernández, Luis
  • Benito González, Isaac
Highly porous, lightweight aerogels were developed based on cellulose extracted via industrial Kraft treatments from vine shoot (S) with the aim of valorising a currently generated waste and eucalyptus (EU) to reduce seasonality. In order to enhance their hydrophobicity and mechanical resistance, a poly-lactic acid (PLA) coating was applied through two different methodologies: spray- and pipette-coating. The resulting materials presented low densities (23–80 kg/m3) with improved mechanical performance, revealing a notable augment in compressive strength after PLA coating (up to 20-fold increase, reaching 1.54 N/cm2), while maintaining low thermal conductivity values around 0.0305 W/mK. These results highlight the potential of the developed aerogels as sustainable and biodegradable protective packaging for wine bottles, offering a balance between thermal insulation, mechanical performance, and circular economy benefits, The authors would like to thank funding derived from the VINEBOX project (IDI-20221020) granted by CDTI. Isaac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI 10.13039/501100011033 is also fully acknowledged. Miguel Sánchez-Soto acknowledges the EcoPolyRub Project: PID2023-151338NB-I00, funded by the Ministry of Science, Innovation and Universities, the State Research Agency, and the European Regional Development Fund (FEDER). Also acknowledges the support received from the Generalitat of Catalonia through the project 2021SGR01042
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tuning the microstructure of cellulosic porous materials: foams, cryogels and aerogels

  • Pérez Ochando, Jorge
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
  • Benito González, Isaac
The massive use of plastic materials derived from fossil fuels and their consequent environmental accumulation have driven the search for more sustainable alternatives. Among them, biopolymer-based materials such as cellulose stand out, as they are not only abundant and renewable but also readily available from lignocellulosic waste, promoting a circular economy. This study analyses porous structures derived from vine shoots’ waste biomass, specifically foams and aerogels obtained via freeze-drying and supercritical CO2 drying. Parameters such as density (15–70 mg/cm3), shrinkage (15–75%), microstructure (wide range of pore sizes up to 3 µm, surface area up to 67 m2/g), mechanical strength (up to 37 N/cm2), and thermal conductivity (29–36 mW/mK) were evaluated to determine the most optimal ones in terms of performance and cost-effectiveness. Finally, the efficiency of polylactic acid (PLA) as a reinforcement was examined to improve the hydrophobicity and sorption capacity (between 5 and 20 g water/g in sorption capacity measurements) and mechanical strength (up to sixfold) of the materials, making them more competitive in various applications, Isaac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI / 10.13039/501100011033 is also fully acknowledged. Miguel Sánchez-Soto acknowledges the research support given through the project EcoPolyRub PID2023-151338NB-I00 financed by MCIU/AEI/10.13039/501100011033/FEDER, UE, and also to the Generalitat de Catalunya (2021SGR01042). This work is also part of María de Maeztu Unit of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas|||0000-0002-1559-8696
  • Fernández Renna, Ana Inés
Shape-stabilized phase change materials (SSPCMs) combine the high energy density of solid-to-liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room-temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed, 7 - Energia Assequible i No Contaminant, 9 - Indústria, Innovació i Infraestructura, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A digital-twin testbench for centrifugal pump systems

  • Díaz Antúnez, Albert
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Diaz Rozo, Javier
This paper presents the Centrifugal Pump Digital Twin Testbench (CPDTT), an instrumented and fully automated experimental platform developed to study mechanical, electrical, and hydraulic failure modes in centrifugal pump systems under controlled conditions. The setup features an advanced architecture for control, data acquisition, and processing, together with a system-level Digital Twin (DT) that enables the implementation of predictive-maintenance algorithms and supports maintenance-oriented decision-making. The resulting linkage supports fault explainability by connecting observed experimental behaviors to specific failure modes. This platform is used to validate novel machine-learning algorithms based on power spectral density (PSD) analysis, aiming to extract features that provide information about the health condition of the different centrifugal-pump components. Cavitation, along with other mechanical and electrical failures, is among the most critical phenomena affecting pump efficiency and lifetime. The DT incorporates physics-based simulation models of the real system, enabling the generation of labeled energy datasets in healthy conditions and under induced faults, and supporting experimentation with supervised learning workflows. A detailed description of the system and the applied methodologies is provided. Overall, the testbench and its digital twin provide a practical environment for analyzing fault behavior in hydraulic systems, validating monitoring algorithms, and assessing computational performance. The methodology used to induce incipient cavitation and the corresponding detection strategies are also described., This study has been supported by the Spanish Centre for the Development of Industrial Technology (CDTI) through the MIG20232016, INDUSTR-IA project, the Doctorats Industrials program from the Catalonia Government (Ref. 2025 DI 00081) and the Spanish project SEAMLESS: Sustainable learning-based Management of Multi-resource Large-scale Systems (ref. PID2023-148840OB-I00), funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors also acknowledge the Digital Twin Consortium TWINSENSE Digital Twin Testbed for enabling industrially relevant validation of the proposed monitoring and digital-twin-ready methodologies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Study of the conductive ink wash-out during overmolding

  • Pascual Cuenca, Enric
  • Sánchez Soto, Miguel|||0000-0002-0023-5059
  • Fontdecaba Baig, Enric
  • Cruz Jesús, Lucía Guadalupe de la|||0000-0001-9009-4503
This study explores the efect of the wash-out of conductive inks used during the in-mold electronic process. The infuence of processing conditions and design parameters on wash-out areas during overmolding is analyzed. Using a comprehensive design of experiments approach, factors like the gate type, cavity thickness, melt temperature, injection rate, and mold temperature were evaluated. Three gating types, namely, edge, fan, and submarine, were considered. From the statistical analysis, it was demonstrated that the choice of gating type is the most important factor. Cavity thickness is the second most important factor for all three gating types. Reducing cavity thickness and raising melt temperatures generally led to a decrease in wash-out (WO), whereas the efect of injection rate varied depending on the gating method used. Adjusting mold temperature also produced favorable results, emphasizing the importance of ink-to-substrate adhesion. Simulation studies revealed the relationship between shear rate and wash-out area, underscoring the need to control injection parameters. These fndings stressed the importance of meticulous design and processing to minimize wash-out defects, thus advancing in-mold electronic technology and meeting market demands for complex electronic parts, Miguel Sanchez-Soto has received research support from the Ministerio de Ciencia e Innovación (Spain) (I00/ AEI/10.13039/501100011033) and Generalitat de Catalunya (2021SGR01042)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative packaging from vine shoots: a circular economy solution based on cellulosic aerogels for the wine industry using PLA as reinforcement

  • García Abril, Paula
  • López Rubio, Amparo
  • Sánchez Soto, Miguel
  • García Fernández, Luis
  • Benito González, Isaac
Highly porous, lightweight aerogels were developed based on cellulose extracted via industrial Kraft treatments from vine shoot (S) with the aim of valorising a currently generated waste and eucalyptus (EU) to reduce seasonality. In order to enhance their hydrophobicity and mechanical resistance, a poly-lactic acid (PLA) coating was applied through two different methodologies: spray- and pipette-coating. The resulting materials presented low densities (23–80 kg/m3) with improved mechanical performance, revealing a notable augment in compressive strength after PLA coating (up to 20-fold increase, reaching 1.54 N/cm2), while maintaining low thermal conductivity values around 0.0305 W/mK. These results highlight the potential of the developed aerogels as sustainable and biodegradable protective packaging for wine bottles, offering a balance between thermal insulation, mechanical performance, and circular economy benefits, The authors would like to thank funding derived from the VINEBOX project (IDI-20221020) granted by CDTI. Isaac Benito-González is recipient of a Torres-Quevedo contract (PTQ2021-011739) from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI 10.13039/501100011033 is also fully acknowledged. Miguel Sánchez-Soto acknowledges the EcoPolyRub Project: PID2023-151338NB-I00, funded by the Ministry of Science, Innovation and Universities, the State Research Agency, and the European Regional Development Fund (FEDER). Also acknowledges the support received from the Generalitat of Catalonia through the project 2021SGR01042, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Study of the conductive ink wash-out during overmolding

  • Pascual Cuenca, Enric
  • Sánchez Soto, Miguel
  • Fontdecaba Baig, Enric
  • Cruz Jesús, Lucía Guadalupe de la
This study explores the efect of the wash-out of conductive inks used during the in-mold electronic process. The infuence of processing conditions and design parameters on wash-out areas during overmolding is analyzed. Using a comprehensive design of experiments approach, factors like the gate type, cavity thickness, melt temperature, injection rate, and mold temperature were evaluated. Three gating types, namely, edge, fan, and submarine, were considered. From the statistical analysis, it was demonstrated that the choice of gating type is the most important factor. Cavity thickness is the second most important factor for all three gating types. Reducing cavity thickness and raising melt temperatures generally led to a decrease in wash-out (WO), whereas the efect of injection rate varied depending on the gating method used. Adjusting mold temperature also produced favorable results, emphasizing the importance of ink-to-substrate adhesion. Simulation studies revealed the relationship between shear rate and wash-out area, underscoring the need to control injection parameters. These fndings stressed the importance of meticulous design and processing to minimize wash-out defects, thus advancing in-mold electronic technology and meeting market demands for complex electronic parts, Miguel Sanchez-Soto has received research support from the Ministerio de Ciencia e Innovación (Spain) (I00/ AEI/10.13039/501100011033) and Generalitat de Catalunya (2021SGR01042), Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Designing natural rubber shape stabilized phase change materials: impact of matrix network on thermophysical properties

  • Neira Viñas, Marc
  • Candau, Nicolas
  • Fernandez, Ana Ines
Shape-stabilized phase change materials (SSPCMs) have been a promising thermal energy storage (TES) solution to combine the high energy density of solid-to-liquid (SL) PCMs and the structural stability of solid–solid PCMs. Although polymeric matrices have been used for their reduced cost and ease of processability, few have evaluated the use of crosslinked natural rubber (NR). In this study, we evaluate by differential scanning calorimetry (DSC) the preparation of room-temperature tailorable SSCPMs by the design of NR matrices with different crosslink density vulcanized by dicumyl peroxide (DCP) or sulphur, with special focus on the quantification of the content of PCM. The results indicate that the amount of PCM stable in the NR matrix is low, with PCM contents between 16 and 24% and enthalpies between 16 and 20 J·g-1. Likewise, it is well-known that thermophysical properties of the PCMs vary upon confinement in a small-scale porous matrix. The confinement of the PCM in the rubber network results in a measured enthalpy below the expected value, and a melting point depression of up to 23.6 °C, dependent on crosslink density. These results highlight the structural complexity of NR-PCM composites and the need for further investigation., The authors would like to thank the Catalan Government for the quality accreditation and funding given to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polι´mers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). DIOPMA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. A.I. Fernández and M. Neira-Viñas acknowledge the project PID2024-159867OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. N. Candau acknowledges the project EcoPolyRub PID2023-151338NB-I00 funded by the Ministerio de Ciencia, Innovación y Universidades (MICIU), the Agencia Estatal de Investigación (AEI) and the FEDER funds. This work is part of María de Maeztu Units of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Deformation and failure mechanisms of natural/waste rubber blends under mechanical and thermal cycles: a synchrotron in situ study

  • Uliana, Samuele
  • Candau, Nicolas
  • Arioli, Matteo
  • Franco García, María Lourdes
  • Maspoch Rulduà, M. Lluïsa
This study investigates the deformation and failure mechanisms of natural rubber (NR) and waste rubber blends under mechanical and thermal cycles using in situ synchrotron wide-angle X-ray diffraction (WAXD). The incorporation of ground tire rubber (GTR) into NR enhances strain-induced crystallization (SIC), reducing the onset strain for crystallization and increasing mechanical reinforcement. Cyclic loadings reveal significant hysteresis and residual deformation, influenced by GTR content. Moreover, the strain at complete melting of SIC crystals is found to decrease with GTR content, suggesting a higher stability of SIC crystals. Under combined tensile stress and high temperature, NR/GTR blends exhibit failure likely due to decohesion at the NR/GTR interface and growth of cavities in the NR matrix. Nonetheless, the temperature at fracture is increased by 15°C with the GTR content at a strain of 300%. As SIC crystals promote resistance to crack growth, failure is delayed under high stress and temperature owing to the nucleating effect of GTR on SIC. In spite of the limitations imposed by the interface between NR and GTR, the study highlights the role of GTR in the promotion of SIC in reinforcing NR-based composites., The authors acknowledge the group eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, a research group of the Generalitat de Catalunya (Grant 2021 SGR 01042). These experiments were performed at BL11-NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff, Marc Malfois, and Cristian Huck Iriart. We acknowledge the project EcoPolyRub PID2023-151338NB-I00 funded by the Ministerio de Ciencia, Innovación y Universidades (MICIU), the Agencia Estatal de Investigación (AEI), and the FEDER funds. This work is part of María de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033. The authors acknowledge the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A digital-twin testbench for centrifugal pump systems

  • Diaz Antunez, Albert
  • Ocampo-Martínez, Carlos
  • Diaz Rozo, Javier
This paper presents the Centrifugal Pump Digital Twin Testbench (CPDTT), an instrumented and fully automated experimental platform developed to study mechanical, electrical, and hydraulic failure modes in centrifugal pump systems under controlled conditions. The setup features an advanced architecture for control, data acquisition, and processing, together with a system-level Digital Twin (DT) that enables the implementation of predictive-maintenance algorithms and supports maintenance-oriented decision-making. The resulting linkage supports fault explainability by connecting observed experimental behaviors to specific failure modes. This platform is used to validate novel machine-learning algorithms based on power spectral density (PSD) analysis, aiming to extract features that provide information about the health condition of the different centrifugal-pump components. Cavitation, along with other mechanical and electrical failures, is among the most critical phenomena affecting pump efficiency and lifetime. The DT incorporates physics-based simulation models of the real system, enabling the generation of labeled energy datasets in healthy conditions and under induced faults, and supporting experimentation with supervised learning workflows. A detailed description of the system and the applied methodologies is provided. Overall, the testbench and its digital twin provide a practical environment for analyzing fault behavior in hydraulic systems, validating monitoring algorithms, and assessing computational performance. The methodology used to induce incipient cavitation and the corresponding detection strategies are also described., This study has been supported by the Spanish Centre for the Development of Industrial Technology (CDTI) through the MIG20232016, INDUSTR-IA project, the Doctorats Industrials program from the Catalonia Government (Ref. 2025 DI 00081) and the Spanish project SEAMLESS: Sustainable learning-based Management of Multi-resource Large-scale Systems (ref. PID2023-148840OB-I00), funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The authors also acknowledge the Digital Twin Consortium TWINSENSE Digital Twin Testbed for enabling industrially relevant validation of the proposed monitoring and digital-twin-ready methodologies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.