Pasar al contenido principal

DISEÑO INNOVADOR DE MATERIALES DE CAMBIO DE FASE PARA AVANZAR EN EL DESARROLLO DE SOLUCIONES DE ALMACENAMIENTO DE ENERGIA TERMICA

PID2024-159867OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Conditions study for PCM microencapsulation using PMMA waste

  • Vera-Rivera, David
  • Neira-Viñas, Marc
  • Formosa, Joan
  • Giro-Paloma, Jessica
Phase change materials (PCM), are used in thermal energy storage (TES) due to their capacity to absorb or release energy during the phase transitions. Hence, PCM present characteristics to reduce the effect caused by the energy consumption for thermal conditioning, by introducing them into building materials. To preserve the PCM, microencapsulation is the procedure to follow. Solvent evaporation method allows using polymeric wastes, to produce microencapsulated PCM (MPCM). This work is aimed to study different conditions to synthetize MPCM using PMMA waste as shell precursor., This research was funded by grant CNS2022-135800 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and grant PID2024-159867OBI00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. The authors would like to thank the Catalan Government (AGAUR) for the quality accreditation and the funding given to their research group DIOPMA (2021 SGR 00708). DIOPMA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Conditions study for PCM microencapsulation using PMMA waste

  • Vera-Rivera, David
  • Neira-Viñas, Marc
  • Formosa, Joan
  • Giro-Paloma, Jessica
Phase change materials (PCM), are used in thermal energy storage (TES) due to their capacity to absorb or release energy during the phase transitions. Hence, PCM present characteristics to reduce the effect caused by the energy consumption for thermal conditioning, by introducing them into building materials. To preserve the PCM, microencapsulation is the procedure to follow. Solvent evaporation method allows using polymeric wastes, to produce microencapsulated PCM (MPCM). This work is aimed to study different conditions to synthetize MPCM using PMMA waste as shell precursor., This research was funded by grant CNS2022-135800 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and grant PID2024-159867OBI00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. The authors would like to thank the Catalan Government (AGAUR) for the quality accreditation and the funding given to their research group DIOPMA (2021 SGR 00708). DIOPMA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Metal-dependent study of LHOIPs for energy storage applications

  • Salgado-Pizarro, Rebeca
  • Collao, Dafne
  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
This work focuses on the synthesis and thermal properties of a series of layered hybrid organic-inorganic perovskites (LHOIPs), solid-solid phase change materials that store energy through polymorphic transitions and are thus promising candidates for cooling electronics by using different divalent metals. Four different divalent metals (Cu, Mn, Zn, and Fe) were used to synthesize (C12H28N)2CuCl4, (C12H28N)2MnCl4, (C12H28N)2ZnCl4, and (C12H28N)2FeCl4. Their crystal and molecular structures, along with thermophysical properties, were analysed. It was found that all components could be synthesized using the optimized methods reported in previous studies. Additionally, the Zn-based component exhibits the highest enthalpy and specific heat, indicating superior heat storage capacity and optimal thermal stability compared to the other metals. Conversely, the Fe-based component showed lower storage capacity and presented synthesis challenges. These LHOIPs, as solid-solid phase change materials, have strong potential as cooling agents for electronics., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (DIOPMA 2021 SGR 00708). DIOPMA is a certified TECNIO agent in the category of technology developers by the Government of Catalonia. This work is partially supported by the grant projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Shape stabilized phase change materials based on natural rubber: Tailoring thermophysical properties via matrix network design

  • Neira-Viñas, Marc
  • Candau, Nicolas
  • Fernández Renna, Ana Inés
Shape‑stabilized phase change materials (SSPCMs) combine the high energy density of solid‑to‑liquid PCMs with the structural stability of solid-solid PCMs. This study examines the feasibility of using crosslinked natural rubber (NR) as a matrix to obtain room‑temperature tailorable SSPCMs. Using Differential Scanning Calorimetry (DSC) analysis, NR matrices with different crosslink densities, vulcanized with dicumyl peroxide or sulfur, are evaluated, with special attention to the actual PCM content incorporated. Results show that only modest amounts of PCM can be stabilized, between 16 and 24 wt.%, with enthalpies of 15-20 J·g-1. Confinement within the rubber network lowers the observable enthalpy and depresses the melting point by up to 23.6 °C. The study highlights the structural complexity of NR-PCM composites and the need for further research to fully understand their advanced thermal behavior., The authors thank the Catalan Government for the quality accreditation to their research groups DIOPMA (2021 SGR 00708) and eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, (2021 SGR 01042). Authors acknowledge the projects PID2024-159867OB-I00 and PID2023-151338NB-I00 funded by FEDER, UE and MICIU/AEI/10.13039/501100011033. N. Candau acknowledges the project RubNatCell from the ERASMUS SEED FUNDING UNITE program cofounded by the European Union.