Pasar al contenido principal

EVALUACION MULTINIVEL DE LA VULNERABILIDADD SISMICA Y MITIGACION DE RIESGO DE EDIFICIOS DE OBRA DE FABRICA EN CENTROS URBANOS HISTORICOS RESILIENTES

RTI2018-099589-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Data analysis using ARX models applied to static structural health monitoring of the Monastery of Sant Cugat

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The church of the monastery of Sant Cugat close to Barcelona is a medieval construction characterized by a complex structural behaviour stemming from the interaction among various structural elements built over different periods. Despite having survived for several centuries, such structures are often affected by slow irreversible deterioration mechanisms that can jeopardise their stability in the future. In order to identify such mechanisms at an early stage, and to better understand the cause of visible pathologies, a static structural health monitoring (SHM) system was installed in the church since 2017. Although this monitoring strategy, aimed at the continuous measurement of key slow-varying parameters, has been used successfully in the past to facilitate the diagnosis of this structural typology, the interpretation of data collected by such systems remains a challenging task. One of the main reasons for this is the fact that many monitored damage and deformation features are sensitive to changes caused by environmental conditions. To address this issue, this paper presents the application of a fully automated data analysis procedure to the records collected from the SHM system installed in the church of the monastery of Sant Cugat. The procedure consists of two parts. The first relies on the identification of models that comprehend an Auto-Regressive output and an eXogenous input (ARX) to represent the dynamics of each monitored response using suitable environmental parameters as predictors. The identified models are then used to estimate filtered evolution rates. The second part of the procedure involves classifying each monitored response into pre-defined evolution states based on outcomes from the first part. The main results from the application to the case of the church of the monastery of Sant Cugat are presented and the implications for the diagnosis of the structure are discussed., This research has received financial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental and numerical analysis of the cyclic in-plane behaviour of retrofitted masonry walls

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper presents an experimental study focused on the mechanical performance of retrofitted brick masonry walls under in-plane cyclic shear test. The specimens were tested in two configurations: unreinforced and retrofitted with Basalt Textile Reinforced Mortar (BTRM). The experimental programme aimed to study the suitability and efficiency of the solutions to increase the mechanical strength, the displacement capacity and the dissipation capacity. In addition, an advanced numerical model was used for the analysis of the strengthened walls subjected to shear compression tests. The masonry was modelled as a continuous homogeneous macro model in which the nonlinear behaviour was described with a constitute model based on Continuum-Damage mechanics. The adopted model was able to capture correctly the main aspects of the observed experimental behaviour, such as initial stiffness, failure mechanism, and loadbearing capacity. The numerical results were compared with the experimental outcome to investigate the ability of the model to describe the in-plane behaviour of brick masonry walls retrofitted with BTRM., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project “Seismic Strengthening of Masonry walls” A-01278. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental testing of solid fired clay bricks in compression: comparison of different bearing surface treatments

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The conservation and preservation of heritage historical masonry buildings requires the evaluation of their structural capacity against gravity and horizontal actions. This evaluation is normally based on meaningful mechanical properties such as the masonry compressive strength. The compressive strength of masonry is highly dependent on the compressive strength of the components. Specifically the experimental assessment of compressive strength in solid fired clay bricks has long been a topic of debate, with various standards describing different specimen shapes, sizes and bearing surfaces treatment. There is an evi-dent lack of consensus on common criteria and procedures for brick mechanical testing. This research focuses on evaluating the compressive strength of two types of solid clay bricks, corresponding to mechanically extruded ones and traditionally handmade bricks by moulding. The reference standards considered are the Amer-ican ASTM C67, the European EN 772-1, the Australian AS/NZS 4456:4, and the Canadian CAN/CSA A82. These standards encompass different specimen shapes, such as whole or half bricks and 100 × 100 × 40 mm3 specimens subjected to various bearing surface treatments, including grinding, capping with cement mortar or gypsum plaster, and placing with birch plywood or fiberboard. Addi-tionally, a novel bearing surface treatment involving the placement of two oiled PTFE sheets on each specimen loading surface is proposed. The experimental campaign focuses on evaluating the compressive strength based on a comparison of the results obtained using the reference standards. The results highlight and quantify the variations in compressive strength obtained for the same type of solid fired clay brick when different reference standards are considered. In addition, the results reveal the potential of using PTFE sheets as a promising possibility for brick mechanical characterization. The PTFE sheets cause very low friction at the specimen-platen surface and therefore allow the measurement of strength values not influenced by the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary ap-proach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evalu-ation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Machine-learning model for the determination of macro-scale masonry properties based on a virtual laboratory at micro-scale

  • Kalkbrenner, Philip
  • Pelà, Luca|||0000-0001-7760-8290
  • Rossi, Riccardo|||0000-0003-0528-7074
Cutting-edge methods in the computational analysis of structures have been developed over the last decades. Such modern tools are helpful to assess the safety of existing buildings. Multi-scale techniques have been proposed to combine the accuracy of micro-modelling and the computational efficiency of macro-modelling. Machine-learning tools have been utilized successfully to train specific models by feeding big source data from different fields, e.g. autonomous driving, face recognition, etc. This research proposes a continuous nonlinear material law that can reproduce data from micro-scale analysis. The proposed method is based on a machine-learning tool that links the two scales of the analysis by training a macro-model smeared damage constitutive law through benchmark data from numerical tests derived from micro-models., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of shear response of brick masonry retrofitted with TRM

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
As one of the main historical construction materials, masonry is abundant among the architectural heritage of earthquake-prone areas of the Mediterranean countries. Earthquake mitigation approaches are now focusing on strengthening solutions based on compatible and environmentally friendly repair materials. These solutions should efficiently improve the in-plane lateral strength and displacement capacity, which are the two most significant parameters considered in the seismic assessment of masonry buildings. This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar, a recurrent typology for historical buildings. Tests under cyclic in-plane forces were carried out on unreinforced and retrofitted walls. The unreinforced walls were repaired and retrofitted after being damaged in the first test and were then tested again to investigate the recovery of strength. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called “scuci-cuci” technique. The retrofitting consisted of externally bonded textile reinforced mortar (TRM). The investigated TRM system was a continuous bidirectional grid of basalt embedded in hydraulic lime mortar. The experimental results show the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry. In addition, the results allow a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Estudio experimental de soluciones basadas en TRM/SRG y su aplicación a casos reales

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Sánchez Martínez, José Luis
  • Cobo, Juan
  • Soria, Miguel Ángel
  • Castellano, Miguel Ángel
El presente trabajo se centra en la caracterización experimental de materiales innovadores basados en la tecnología Textile Reinforced Mortar (TRM) y Steel Reinforced Grout (SRG) para su uso como refuerzo estructural para mejorar la resistencia en el plano de muros portantes de obra fábrica de ladrillo en edificios existentes. El programa experimental consistió en la construcción de 12 muros de doble hoja de ladrillo macizo de arcilla hechos a mano y juntas de mortero de baja resistencia de cal hidráulica, una tipología recurrente en los edificios históricos de los países mediterráneos. Los muros se ensayaron en dos configuraciones: no reforzadas y reforzadas. Los muros fueron reforzados mediante TRM con malla basalto de baja densidad (LDB) y SRG con acero de ultra alta resistencia de baja densidad (LDS), colocados superficialmente y con una configuración simétrica. De los 12 muros, 6 fueron ensayados mediante compresión diagonal y 6 mediante el ensayo de corte y compresión. Los resultados de la investigación ponen en relieve la eficacia de las soluciones de refuerzo investigados para aumentar la resistencia y la ductilidad de la obra de fábrica de ladrillo., Los autores agradecen el apoyo financiero del Ministerio de Ciencia, Innovación y Universidades (MCIU) del Gobierno de España, de la Agencia Estatal de Investigación (AEI) y del Fondo Europeo de Desarrollo Regional (FEDER) a través del proyecto SEVERUS ("Evaluación multinivel de la vulnerabilidad sísmica y mitigación del riesgo de edificios de mampostería en centros urbanos históricos resilientes", ref. num. RTI2018-099589-BI00), y de Kerakoll Ibérica S.A. a través del proyecto de RTD A-01217. También se agradece el apoyo de la Secretaria d'Universitats i Investigació de la Generalitat de Catalunya a través de una beca predoctoral concedida al primer autor., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of traditional timber-masonry buildings subjected to lateral loads

  • Jiménez Ramírez, María Belén
  • Pelà, Luca|||0000-0001-7760-8290
Existing heritage buildings are often composed of diverse structural typologies, representing a challenge for structural analysis. This work investigates the use of nonlinear static analysis to assess the seismic behaviour of hybrid timber-masonry buildings. The proposed methodology includes the use of Lumped Plasticity Models (LPM) and Macro-Mechanical Finite Element (FE) approaches to simulate the response of structures composed of timber frames and masonry walls. Benchmark experiments on timber and masonry specimens subjected to lateral loads are used to calibrate the constitutive laws governing the behaviour of the proposed models. The calibrated models are used to appraise the seismic response of an existing timber-masonry building located in the historical centre of Valparaíso (Chile). The results predict the nonlinear acceleration-displacement capacity of the buildings, as well as the expected damage of the structure, revealing the potential local and global failure mechanisms., This research has received the financial support from the ELARCH project (Euro-Latin America partnership in natural Risk Mitigation and protection of the Cultural Heritage), reference number 552129-EM-1-2014-1-IT- ERASMUS MUNDUS EMA21, funded with support of the European Commission. This document reflects the view of the authors, and the Commission cannot be held responsible for any use that may be made of the information contained therein. The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Static structural health monitoring and automated data analysis procedures applied to the diagnosis of a complex medieval masonry monastery

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Pelà, Luca|||0000-0001-7760-8290
  • Molins i Borrell, Climent|||0000-0001-8292-0473
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Copyright 2020 Society of Photo‑Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this publication for a fee or for commercial purposes, and modification of the contents of the publication are prohibited., Static structural health monitoring (SHM), aimed at the continuous measurement of slow-varying parameters over a long period, has been proved to be a powerful tool to support the diagnosis of masonry heritage structures. In such applications, the initial interpretation task involves the identification of evolutionary conditions from recorded data. However, this can be difficult since monitored features are influenced by environmental changes. In addition, many masonry heritage structures are characterised by a complex structural behaviour stemming from the interaction among different elements, making the task of interpreting SHM data for diagnosis very challenging. One such structure is the church of the monastery of Sant Cugat close to Barcelona, built mostly between the 12th and 15th centuries. Certain key structural parameters of the church have been monitored since 2017 with the aim of understanding the cause of visible pathologies and identifying any active deterioration mechanisms that could pose a threat to the structural integrity of the church in the future. This paper presents the application of an automated data analysis methodology to this problem. The method uses dynamic regression models to filter out components related to reversible seasonal fluctuations from measurements and automatically classifies monitored parameters into evolutionary states based on predicted evolution rates and dispersion metrics from the filtering procedure. A tool is presented which allows analysis results to be updated as new data is received. Finally, results from the proposed methodology are used for the diagnosis of the structure and their usefulness in a broader decision-making framework is discussed., This research has received _nancial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the _nancial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018- 099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Challenges posed by computational modelling and nonlinear analysis of complex historical masonry structures

  • Pelà, Luca|||0000-0001-7760-8290
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This study analyses some of the most common challenges encountered in numerical modelling and nonlinear analysis of complex historical masonry structures of the built cultural heritage. The research highlights the need for preliminary activities, including historical investigation, inspection, and structural health monitoring, to support the advanced computations by means of essential empirical data for model calibration and validation. This multidisciplinary scientific approach allows drawing optimum conclusions from the structural analysis, in order to plan future studies or interventions respectful of the heritage value of the historical building. The study presents a numerical model, specifically developed for complex historical masonry constructions, able to describe the time-dependent strain accumulation in the material due to long-term exposure to constant stress, as well as the damaging behaviour under different stress states. The resulting coupled viscoelasticity and tension-compression continuum damage model is characterised by several advantages, especially in terms of simplicity and computational efficiency. The strain driven format, the reduced number of internal variables and input parameters make the model suitable for the numerical analysis of large historical structures, such as churches or cathedrals. The proposed constitutive model is combined with a crack-tracking technique to represent tensile crack localization, allowing a more realistic description of damage phenomena and mesh-objective results. In this work, the numerical model is applied to the study of two important monuments in Spain, i.e. Mallorca Cathedral and the church of the Poblet Monastery (UNESCO World Heritage Site). The structural analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking patterns, given by architectural alterations experienced by the monument in the past, insufficient buttressing of the naves, and effects of past earthquakes. In both studies, the results of the advanced numerical results, fully supported and validated by the empirical evidence from experimental activities, motivate the development of future studies based on continuous structural health monitoring, now under consideration.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of in-plane shear behaviour of brick masonry retrofitted with basalt and steel reinforced mortars

  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Camata, Guido
This paper focuses on the application of composite materials to improve the in-plane shear strength of existing brick masonry walls. The experimental program involved the construction of walls composed of handmade solid clay brick and hydraulic lime mortar joints, a recurrent typology for historical buildings in the Mediterranean countries. The walls were tested under both unreinforced and reinforced configurations, being the latter obtained by either externally bonded textile reinforced mortar (TRM) or structural repointing with near surface mounted (NSM) rebars into the bed joints. Both TRM and NSM compounds were embedded in hydraulic lime mortar. The diagonal compression tests on retrofitted specimens considered different double-sided TRM configurations. One of them consisted in a novel asymmetric layout based on basalt TRM on one face, and NSM steel reinforcing bars on the other face. The experimental results illustrate the suitability of the proposed TRM and NSM solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research outcomes highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Investigation on experimental techniques for the mechanical characterization of brick masonry

  • Roca Fabregat, Pedro|||0000-0001-5400-5817
  • Pelà, Luca|||0000-0001-7760-8290
One of the main difficulties found in the assessment and verification of masonry historical structures lays in the characterization of the main mechanical properties of the material components (units and mortar) and masonry as composite material. In an attempt to provide possible approaches for mechanical characterization, the paper presents and discusses different Minor Destructive Tests (MDTs) oriented to the measurement of the compressive strength of mortar bed joints and masonry composite samples extracted from existing brick masonries. The MDTs discussed for mortar characterization are the Double Punch Test (DPT), the Windsor Pin Penetration Test (PPT) and the Helix Screw Pull-Out Test (HPT). The method presented for the characterization of masonry as composite encompasses laboratory tests on cylindrical core samples. Different types of cylindrical samples, corresponding to alternative sizes and geometrical joint configurations, are investigated based on-purpose built laboratory walls and from a set of real case studies. The proposed MDTs are appraised with regard to their reliability and real applicability., The authors gratefully acknowledge the financial support provided by the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government and the State Agency of Research (AEI), as well as that of the European Regional Development Fund (FEDER) through projects MULTIMAS (BIA2015-63882-P) and SEVERUS (RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Laboratory and in-situ characterisation of masonry materials in a large historical industrial building in Barcelona

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
This paper presents an experimental campaign carried out in an historical industrial building of Barcelona from the 19th century, considering in-situ and laboratory minor destructive testing (MDT) techniques. The results obtained showed a good relationship between the in-situ MDT techniques and the tests carried out in the laboratory. The experimental results from different portions of the large-scale building allowed the discovery of different material typologies deriving from different construction phases., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seismic performance of typical hybrid buildings in the urban centre of Barcelona

  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Unreinforced existing masonry buildings, located in many historical urban centres, present specific construction characteristics that can have a significant impact on their seismic performance. As these structures are often designed considering only gravity loads before the introduction of seismic codes, they are commonly found to be particularly vulnerable to seismic actions. This work investigates the seismic performance of representative existing masonry buildings located in the Eixample district of Barcelona, Spain. These buildings are characterised by several common structural features, allowing grouping them into building typologies characterised by a similar structural response. The results of a building taxonomy of the specific district manifest the existence of two structural typologies related with the load-bearing system: one with load-bearing slender masonry walls throughout the whole height and a second hybrid one with steel beams and cast-iron columns on the ground floor and unreinforced masonry walls in the upper ones. The second typology is very common because it allows for large open space at the ground floor level, commonly used for commercial or administrative facilities. The drawback of this hybrid structural system is its reduced seismic performance, as the slender piers at the ground floor facilitate the development of a soft-storey mechanism. The main objective of this paper is to evaluate the seismic vulnerability of a typical hybrid building system composed by steel frames on the ground floor and unreinforced masonry at the upper floors. The seismic assessment and the identification of the collapse mechanism of this building typology have been carried out using the Finite Element Method. Seismic loading has been simulated through non-linear static (pushover) analyses in two main directions (parallel and perpendicular to the façades). The results of the numerical analysis allow a better understanding of the seismic performance of hybrid steel-masonry building typologies. This work is part of an ongoing research devoted to a large-scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Measurement of solid brick compressive strength and anisotropy on non-standard small cubic specimens

  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The final authenticated version is available online at https://doi.org/10.1007/978-3-031-39603-8_48, An experimental research has been carried out on the possibility of measuring the compressive strength of ceramic solid bricks by testing in laboratory non-standardized cubic samples measuring 40 × 40 × 40 mm3. The viability of such approach has been confirmed through a systematic comparison, for a variety of brick types, with compression strength values obtained for the standard prismatic 100 × 100 × 40 mm3 specimen. The comparison has allowed the derivation of a reliable correlation to estimate an equivalent compressive strength based on the 40 × 40 × 40 mm3 spec-imen. The proposed cubic specimen is largely advantageous in the characterization of the compressive strength of exist-ing masonries built with moderately thin bricks (with thickness in the order or 4 or 5 cm). It can be also used to accurately characterize the anisotropy that the manufacturing process can induce in the bricks and its influence on the strength. Taking advantage of this possibility, the paper also presents a detailed investigation on the anisotropy of different brick types., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Assessing the impact of seismic risk mitigation at the urban scale on community resilience and housing recovery

  • Basaglia, Alberto
  • Aprile, Alessandra
  • Spacone, Enrico
  • Pelà, Luca|||0000-0001-7760-8290
European historical city centers are particularly prone to natural disasters. This is due to the fragility of structures that often times do not comply with seismic codes; the high constructions’ density that causes induced damage; and the historical relevance of buildings that makes difficult the enacting of mitigation strategies. In Italy, major earthquake caused extensive damages over the last century. Seismic events have a huge impact on the Nation’s economy growth due to direct and indirect impacts, such as for example the high reconstruction costs or the business interruption spread out over a long period, respectively. In addition, the duration of recovery can affect the population wellbeing and cause permanent displacement. For this reason, the preventive planning of disaster management strategies are crucial to mitigate the damage and enhance resilience. Proposed strategies have to be effective and economically sustainable. In this paper, two towns affected by the 2012 Northern Italy Earthquake are chosen to analyze the reconstruction process. Using information published on the town journal, relevant aspects of the community resilience are highlighted. In particular, the housing recovery, i.e. the return of displaced people to a permanent housing solution is investigated. Then, a suite of seismic mitigation strategies is proposed for both cities, taking into account the peculiarity of the built environment and the damage distribution available thanks to the post-event buildings’ inspection. The effectiveness of the proposed strategies is assessed through a cost-benefit analysis, highlighting optimal solutions to reduce the economic and social losses., This work was supported by the FAR funding of the University of Ferrara, 2015, “Historical Centers Livable and Sustainable” (HC-LIVE)” and by the scholarship of the University “G. D’Annunzio” Chieti-Pescara, 2019, “Risk Assessment of the Built Heritage at the Urban Scale” (Ref. Num. 0002299). The fourth Author would like to acknowledge the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. Num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Seismic vulnerability assessment of representative building typologies from Barcelona's Eixample district

  • Dimovska, Sara|||0000-0003-4882-7608
  • Saloustros, Savvas|||0000-0002-9513-8373
  • Pelà, Luca|||0000-0001-7760-8290
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
Unreinforced masonry buildings prevail in many old historical centres and urban areas worldwide. These structures may present inadequate seismic performance because they were often designed without considering any seismic resistance requirements. Therefore, they may be highly vulnerable and susceptible to damage caused by earthquakes, even of low intensity. This work investigates the seismic vulnerability of typical unreinforced masonry buildings situated in the Eixample district of Barcelona, Spain. Most of the buildings of the district were designed only for vertical static loads with slender load-bearing masonry walls and flexible diaphragms. A typical characteristic is the presence of openings with considerable size on the facades. The identification of the main parameters affecting the structural behaviour under lateral loading is necessary to evaluate the seismic vulnerability. As a first step, a building taxonomy for the Eixample district has been prepared in order to classify the different building typologies by taking into account the influence of the structural features in the overall response. This typology classification serves two aims. The first aim is to empirically evaluate the vulnerability of each category. The second one is to provide the basis for creating a numerical model of a representative building and analyse its seismic performance. The main objective of this paper is to assess the seismic behaviour of a typical unreinforced masonry structure by means of nonlinear static analysis. For this purpose, a three-dimensional Finite Element model of a representative building has been prepared. Pushover analyses have been performed in two directions (parallel and perpendicular to the façades) aiming to identify the typical failure mechanisms and the seismic capacity. The performance of the representative building typology, with its typical heterogeneities and irregularities, is compared with that of a reference regular unreinforced masonry structure. Additionally, a parametric analysis is carried out to evaluate the different seismic response by adding more storeys in height. This work is the basis for future analyses devoted to large scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The inspection by minor destructive testing in projects of adaptive reuse of historical masonry buildings and design of green rooftops in Barcelona

  • Pelà, Luca|||0000-0001-7760-8290
  • Cabané Cañas, Albert|||0000-0002-5858-2563
  • Cuadros Rojas, Emerson Julio|||0000-0003-4148-848X
  • Garcia Ramonda, Larisa|||0000-0001-5438-6314
  • Roca Fabregat, Pedro|||0000-0001-5400-5817
The mechanical characterisation of existing masonry in historical structures encounters several technical dif-ficulties due to the complexity and heterogeneity of this traditional material, as well as to the need for respectful inspec-tion activities able to preserve the cultural heritage value of the building. This paper presents and discusses different Minor Destructive Testing (MDT) techniques oriented at estimating, either in-situ or in the laboratory, the mechanical properties of masonry at the level of components, such as units, tiles, and mortar joints, and at the level of the composite material. The research addresses different issues related to the execution of laboratory tests on sampled historical mate-rials, such as selection of the size and shape of specimens, different types of treatments for the sample, testing protocols, and experimental setup. The complementary use of Finite Element Method (FEM) models represents a valuable activity to provide a good understanding of the experimental behaviour exhibited by the specimens, and especially concerning the execution of non-standard laboratory tests. The possibility of in-situ MDT is explored considering techniques based on different portable instruments, previously calibrated through ad-hoc experimental programs under controlled labora-tory conditions. The research is based on a high number of tests executed at the UPC within the context of several experimental programs linked to projects of adaptive reuse of existing masonry buildings and design of green rooftops in Barcelona., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional De-velopment Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). The first author gratefully acknowledges the owners of the historical buildings investigated, as well as people from the institutions and companies involved in the studies and projects mentioned in this work and in particular Sergio Carratalá from MataAlta. The second and third authors gratefully acknowledge the Spanish Ministry of Science, Innovation and Universities, and the AGAUR agency of the Generalitat de Catalunya, for the financial support of their predoctoral grants., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.2 - Incorporar mesures relatives al canvi climàtic en les polítiques, les estratègies i els plans nacionals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental assessment of shear response of brick masonry retrofitted with TRM

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
As one of the main historical construction materials, masonry is abundant among the architectural heritage of earthquake-prone areas of the Mediterranean countries. Earthquake mitigation approaches are now focusing on strengthening solutions based on compatible and environmentally friendly repair materials. These solutions should efficiently improve the in-plane lateral strength and displacement capacity, which are the two most significant parameters considered in the seismic assessment of masonry buildings. This paper reports an experimental programme on masonry walls composed of handmade solid clay brick and hydraulic lime mortar, a recurrent typology for historical buildings. Tests under cyclic in-plane forces were carried out on unreinforced and retrofitted walls. The unreinforced walls were repaired and retrofitted after being damaged in the first test and were then tested again to investigate the recovery of strength. The repair consisted in filling the open cracks and replacing the damaged bricks by following the so-called “scuci-cuci” technique. The retrofitting consisted of externally bonded textile reinforced mortar (TRM). The investigated TRM system was a continuous bidirectional grid of basalt embedded in hydraulic lime mortar. The experimental results show the suitability of the proposed solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research results highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry. In addition, the results allow a better understanding of the behaviour of masonry walls subjected to cyclic horizontal displacement., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic vulnerability assessment of representative building typologies from Barcelona's Eixample district

  • Dimovska, Sara
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
Unreinforced masonry buildings prevail in many old historical centres and urban areas worldwide. These structures may present inadequate seismic performance because they were often designed without considering any seismic resistance requirements. Therefore, they may be highly vulnerable and susceptible to damage caused by earthquakes, even of low intensity. This work investigates the seismic vulnerability of typical unreinforced masonry buildings situated in the Eixample district of Barcelona, Spain. Most of the buildings of the district were designed only for vertical static loads with slender load-bearing masonry walls and flexible diaphragms. A typical characteristic is the presence of openings with considerable size on the facades. The identification of the main parameters affecting the structural behaviour under lateral loading is necessary to evaluate the seismic vulnerability. As a first step, a building taxonomy for the Eixample district has been prepared in order to classify the different building typologies by taking into account the influence of the structural features in the overall response. This typology classification serves two aims. The first aim is to empirically evaluate the vulnerability of each category. The second one is to provide the basis for creating a numerical model of a representative building and analyse its seismic performance. The main objective of this paper is to assess the seismic behaviour of a typical unreinforced masonry structure by means of nonlinear static analysis. For this purpose, a three-dimensional Finite Element model of a representative building has been prepared. Pushover analyses have been performed in two directions (parallel and perpendicular to the façades) aiming to identify the typical failure mechanisms and the seismic capacity. The performance of the representative building typology, with its typical heterogeneities and irregularities, is compared with that of a reference regular unreinforced masonry structure. Additionally, a parametric analysis is carried out to evaluate the different seismic response by adding more storeys in height. This work is the basis for future analyses devoted to large scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Seismic performance of typical hybrid buildings in the urban centre of Barcelona

  • Dimovska, Sara
  • Saloustros, Savvas
  • Pelà, Luca
  • Roca Fabregat, Pedro
Unreinforced existing masonry buildings, located in many historical urban centres, present specific construction characteristics that can have a significant impact on their seismic performance. As these structures are often designed considering only gravity loads before the introduction of seismic codes, they are commonly found to be particularly vulnerable to seismic actions. This work investigates the seismic performance of representative existing masonry buildings located in the Eixample district of Barcelona, Spain. These buildings are characterised by several common structural features, allowing grouping them into building typologies characterised by a similar structural response. The results of a building taxonomy of the specific district manifest the existence of two structural typologies related with the load-bearing system: one with load-bearing slender masonry walls throughout the whole height and a second hybrid one with steel beams and cast-iron columns on the ground floor and unreinforced masonry walls in the upper ones. The second typology is very common because it allows for large open space at the ground floor level, commonly used for commercial or administrative facilities. The drawback of this hybrid structural system is its reduced seismic performance, as the slender piers at the ground floor facilitate the development of a soft-storey mechanism. The main objective of this paper is to evaluate the seismic vulnerability of a typical hybrid building system composed by steel frames on the ground floor and unreinforced masonry at the upper floors. The seismic assessment and the identification of the collapse mechanism of this building typology have been carried out using the Finite Element Method. Seismic loading has been simulated through non-linear static (pushover) analyses in two main directions (parallel and perpendicular to the façades). The results of the numerical analysis allow a better understanding of the seismic performance of hybrid steel-masonry building typologies. This work is part of an ongoing research devoted to a large-scale seismic vulnerability assessment of the most representative building typologies of the Eixample district., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). The support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Measurement of solid brick compressive strength and anisotropy on non-standard small cubic specimens

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The final authenticated version is available online at https://doi.org/10.1007/978-3-031-39603-8_48, An experimental research has been carried out on the possibility of measuring the compressive strength of ceramic solid bricks by testing in laboratory non-standardized cubic samples measuring 40 × 40 × 40 mm3. The viability of such approach has been confirmed through a systematic comparison, for a variety of brick types, with compression strength values obtained for the standard prismatic 100 × 100 × 40 mm3 specimen. The comparison has allowed the derivation of a reliable correlation to estimate an equivalent compressive strength based on the 40 × 40 × 40 mm3 spec-imen. The proposed cubic specimen is largely advantageous in the characterization of the compressive strength of exist-ing masonries built with moderately thin bricks (with thickness in the order or 4 or 5 cm). It can be also used to accurately characterize the anisotropy that the manufacturing process can induce in the bricks and its influence on the strength. Taking advantage of this possibility, the paper also presents a detailed investigation on the anisotropy of different brick types., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a pre-doctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental testing of solid fired clay bricks in compression: comparison of different bearing surface treatments

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
The conservation and preservation of heritage historical masonry buildings requires the evaluation of their structural capacity against gravity and horizontal actions. This evaluation is normally based on meaningful mechanical properties such as the masonry compressive strength. The compressive strength of masonry is highly dependent on the compressive strength of the components. Specifically the experimental assessment of compressive strength in solid fired clay bricks has long been a topic of debate, with various standards describing different specimen shapes, sizes and bearing surfaces treatment. There is an evi-dent lack of consensus on common criteria and procedures for brick mechanical testing. This research focuses on evaluating the compressive strength of two types of solid clay bricks, corresponding to mechanically extruded ones and traditionally handmade bricks by moulding. The reference standards considered are the Amer-ican ASTM C67, the European EN 772-1, the Australian AS/NZS 4456:4, and the Canadian CAN/CSA A82. These standards encompass different specimen shapes, such as whole or half bricks and 100 × 100 × 40 mm3 specimens subjected to various bearing surface treatments, including grinding, capping with cement mortar or gypsum plaster, and placing with birch plywood or fiberboard. Addi-tionally, a novel bearing surface treatment involving the placement of two oiled PTFE sheets on each specimen loading surface is proposed. The experimental campaign focuses on evaluating the compressive strength based on a comparison of the results obtained using the reference standards. The results highlight and quantify the variations in compressive strength obtained for the same type of solid fired clay brick when different reference standards are considered. In addition, the results reveal the potential of using PTFE sheets as a promising possibility for brick mechanical characterization. The PTFE sheets cause very low friction at the specimen-platen surface and therefore allow the measurement of strength values not influenced by the specimen shape., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation of the Spanish Government (MCI), the State Agency of Research (AEI) as well as that of the European Regional Development Fund (ERDF) through the projects PONT3 (Anticipating failure propagation of ageing bridges through a cost-effective interdisciplinary ap-proach, ref. Num. PID2021-124236OB-C32), and SEVERUS (Multilevel evalu-ation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from the MCI through a predoctoral grant awarded to the first author is also gratefully acknowledged., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Machine-learning model for the determination of macro-scale masonry properties based on a virtual laboratory at micro-scale

  • Kalkbrenner, Philip
  • Pelà, Luca
  • Rossi, Riccardo
Cutting-edge methods in the computational analysis of structures have been developed over the last decades. Such modern tools are helpful to assess the safety of existing buildings. Multi-scale techniques have been proposed to combine the accuracy of micro-modelling and the computational efficiency of macro-modelling. Machine-learning tools have been utilized successfully to train specific models by feeding big source data from different fields, e.g. autonomous driving, face recognition, etc. This research proposes a continuous nonlinear material law that can reproduce data from micro-scale analysis. The proposed method is based on a machine-learning tool that links the two scales of the analysis by training a macro-model smeared damage constitutive law through benchmark data from numerical tests derived from micro-models., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00). Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The inspection by minor destructive testing in projects of adaptive reuse of historical masonry buildings and design of green rooftops in Barcelona

  • Pelà, Luca
  • Cabané Cañas, Albert
  • Cuadros Rojas, Emerson Julio
  • Garcia Ramonda, Larisa
  • Roca Fabregat, Pedro
The mechanical characterisation of existing masonry in historical structures encounters several technical dif-ficulties due to the complexity and heterogeneity of this traditional material, as well as to the need for respectful inspec-tion activities able to preserve the cultural heritage value of the building. This paper presents and discusses different Minor Destructive Testing (MDT) techniques oriented at estimating, either in-situ or in the laboratory, the mechanical properties of masonry at the level of components, such as units, tiles, and mortar joints, and at the level of the composite material. The research addresses different issues related to the execution of laboratory tests on sampled historical mate-rials, such as selection of the size and shape of specimens, different types of treatments for the sample, testing protocols, and experimental setup. The complementary use of Finite Element Method (FEM) models represents a valuable activity to provide a good understanding of the experimental behaviour exhibited by the specimens, and especially concerning the execution of non-standard laboratory tests. The possibility of in-situ MDT is explored considering techniques based on different portable instruments, previously calibrated through ad-hoc experimental programs under controlled labora-tory conditions. The research is based on a high number of tests executed at the UPC within the context of several experimental programs linked to projects of adaptive reuse of existing masonry buildings and design of green rooftops in Barcelona., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional De-velopment Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). The first author gratefully acknowledges the owners of the historical buildings investigated, as well as people from the institutions and companies involved in the studies and projects mentioned in this work and in particular Sergio Carratalá from MataAlta. The second and third authors gratefully acknowledge the Spanish Ministry of Science, Innovation and Universities, and the AGAUR agency of the Generalitat de Catalunya, for the financial support of their predoctoral grants., Peer Reviewed, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.2 - Incorporar mesures relatives al canvi climàtic en les polítiques, les estratègies i els plans nacionals, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Challenges posed by computational modelling and nonlinear analysis of complex historical masonry structures

  • Pelà, Luca
  • Saloustros, Savvas
  • Roca Fabregat, Pedro
This study analyses some of the most common challenges encountered in numerical modelling and nonlinear analysis of complex historical masonry structures of the built cultural heritage. The research highlights the need for preliminary activities, including historical investigation, inspection, and structural health monitoring, to support the advanced computations by means of essential empirical data for model calibration and validation. This multidisciplinary scientific approach allows drawing optimum conclusions from the structural analysis, in order to plan future studies or interventions respectful of the heritage value of the historical building. The study presents a numerical model, specifically developed for complex historical masonry constructions, able to describe the time-dependent strain accumulation in the material due to long-term exposure to constant stress, as well as the damaging behaviour under different stress states. The resulting coupled viscoelasticity and tension-compression continuum damage model is characterised by several advantages, especially in terms of simplicity and computational efficiency. The strain driven format, the reduced number of internal variables and input parameters make the model suitable for the numerical analysis of large historical structures, such as churches or cathedrals. The proposed constitutive model is combined with a crack-tracking technique to represent tensile crack localization, allowing a more realistic description of damage phenomena and mesh-objective results. In this work, the numerical model is applied to the study of two important monuments in Spain, i.e. Mallorca Cathedral and the church of the Poblet Monastery (UNESCO World Heritage Site). The structural analysis of the first case study allows understanding the reasons of its current deformed condition, i.e. critical construction process, strain accumulation given by long-term creep phenomena, and nonlinear geometric effects. The structural analysis of the second case study allows the structural diagnosis of the existing deformation and cracking patterns, given by architectural alterations experienced by the monument in the past, insufficient buttressing of the naves, and effects of past earthquakes. In both studies, the results of the advanced numerical results, fully supported and validated by the empirical evidence from experimental activities, motivate the development of future studies based on continuous structural health monitoring, now under consideration., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Laboratory and in-situ characterisation of masonry materials in a large historical industrial building in Barcelona

  • Cabané Cañas, Albert
  • Pelà, Luca
  • Roca Fabregat, Pedro
This paper presents an experimental campaign carried out in an historical industrial building of Barcelona from the 19th century, considering in-situ and laboratory minor destructive testing (MDT) techniques. The results obtained showed a good relationship between the in-situ MDT techniques and the tests carried out in the laboratory. The experimental results from different portions of the large-scale building allowed the discovery of different material typologies deriving from different construction phases., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI) as well as that of the ERDF (European Regional Development Fund) through the project SEVERUS (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. Num. RTI2018-099589-B-I00). Support from MCIU through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical simulation of traditional timber-masonry buildings subjected to lateral loads

  • Jiménez Ramírez, María Belén
  • Pelà, Luca
Existing heritage buildings are often composed of diverse structural typologies, representing a challenge for structural analysis. This work investigates the use of nonlinear static analysis to assess the seismic behaviour of hybrid timber-masonry buildings. The proposed methodology includes the use of Lumped Plasticity Models (LPM) and Macro-Mechanical Finite Element (FE) approaches to simulate the response of structures composed of timber frames and masonry walls. Benchmark experiments on timber and masonry specimens subjected to lateral loads are used to calibrate the constitutive laws governing the behaviour of the proposed models. The calibrated models are used to appraise the seismic response of an existing timber-masonry building located in the historical centre of Valparaíso (Chile). The results predict the nonlinear acceleration-displacement capacity of the buildings, as well as the expected damage of the structure, revealing the potential local and global failure mechanisms., This research has received the financial support from the ELARCH project (Euro-Latin America partnership in natural Risk Mitigation and protection of the Cultural Heritage), reference number 552129-EM-1-2014-1-IT- ERASMUS MUNDUS EMA21, funded with support of the European Commission. This document reflects the view of the authors, and the Commission cannot be held responsible for any use that may be made of the information contained therein. The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Static structural health monitoring and automated data analysis procedures applied to the diagnosis of a complex medieval masonry monastery

  • Makoond, Nirvan Chandra
  • Pelà, Luca
  • Molins i Borrell, Climent
  • Roca Fabregat, Pedro
Copyright 2020 Society of Photo‑Optical Instrumentation Engineers (SPIE). One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this publication for a fee or for commercial purposes, and modification of the contents of the publication are prohibited., Static structural health monitoring (SHM), aimed at the continuous measurement of slow-varying parameters over a long period, has been proved to be a powerful tool to support the diagnosis of masonry heritage structures. In such applications, the initial interpretation task involves the identification of evolutionary conditions from recorded data. However, this can be difficult since monitored features are influenced by environmental changes. In addition, many masonry heritage structures are characterised by a complex structural behaviour stemming from the interaction among different elements, making the task of interpreting SHM data for diagnosis very challenging. One such structure is the church of the monastery of Sant Cugat close to Barcelona, built mostly between the 12th and 15th centuries. Certain key structural parameters of the church have been monitored since 2017 with the aim of understanding the cause of visible pathologies and identifying any active deterioration mechanisms that could pose a threat to the structural integrity of the church in the future. This paper presents the application of an automated data analysis methodology to this problem. The method uses dynamic regression models to filter out components related to reversible seasonal fluctuations from measurements and automatically classifies monitored parameters into evolutionary states based on predicted evolution rates and dispersion metrics from the filtering procedure. A tool is presented which allows analysis results to be updated as new data is received. Finally, results from the proposed methodology are used for the diagnosis of the structure and their usefulness in a broader decision-making framework is discussed., This research has received _nancial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the _nancial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018- 099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental and numerical analysis of the cyclic in-plane behaviour of retrofitted masonry walls

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
This paper presents an experimental study focused on the mechanical performance of retrofitted brick masonry walls under in-plane cyclic shear test. The specimens were tested in two configurations: unreinforced and retrofitted with Basalt Textile Reinforced Mortar (BTRM). The experimental programme aimed to study the suitability and efficiency of the solutions to increase the mechanical strength, the displacement capacity and the dissipation capacity. In addition, an advanced numerical model was used for the analysis of the strengthened walls subjected to shear compression tests. The masonry was modelled as a continuous homogeneous macro model in which the nonlinear behaviour was described with a constitute model based on Continuum-Damage mechanics. The adopted model was able to capture correctly the main aspects of the observed experimental behaviour, such as initial stiffness, failure mechanism, and loadbearing capacity. The numerical results were compared with the experimental outcome to investigate the ability of the model to describe the in-plane behaviour of brick masonry walls retrofitted with BTRM., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (“Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres”, ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project “Seismic Strengthening of Masonry walls” A-01278. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Experimental study of in-plane shear behaviour of brick masonry retrofitted with basalt and steel reinforced mortars

  • Garcia Ramonda, Larisa
  • Pelà, Luca
  • Roca Fabregat, Pedro
  • Camata, Guido
This paper focuses on the application of composite materials to improve the in-plane shear strength of existing brick masonry walls. The experimental program involved the construction of walls composed of handmade solid clay brick and hydraulic lime mortar joints, a recurrent typology for historical buildings in the Mediterranean countries. The walls were tested under both unreinforced and reinforced configurations, being the latter obtained by either externally bonded textile reinforced mortar (TRM) or structural repointing with near surface mounted (NSM) rebars into the bed joints. Both TRM and NSM compounds were embedded in hydraulic lime mortar. The diagonal compression tests on retrofitted specimens considered different double-sided TRM configurations. One of them consisted in a novel asymmetric layout based on basalt TRM on one face, and NSM steel reinforcing bars on the other face. The experimental results illustrate the suitability of the proposed TRM and NSM solutions for seismic retrofit and post-earthquake repair of existing masonry buildings. The research outcomes highlight the effectiveness of the investigated systems in increasing the resistance and ductility of unreinforced brick masonry., The authors gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI) and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres ref. num. RTI2018-099589-BI00), and from Kerakoll Ibérica S.A. through the RTD project A-01217. Support from Secretaria d’Universitats i Investigació de la Generalitat de Catalunya through a predoctoral grant awarded to the first author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les persones, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.b - Per a 2020, augmentar substancialment el nombre de ciutats i assentaments humans que adopten i posen en marxa polítiques i plans integrats per promoure la inclusió, l’ús eficient dels recursos, la mitigació del canvi climàtic i l’adaptació a aquest, així com la resiliència davant dels desastres, i desenvolupar i posar en pràctica una gestió integral dels riscos de desastre a tots els nivells, d’acord amb el Marc de Sendai per a la reducció del risc de desastres 2015.2030, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Assessing the impact of seismic risk mitigation at the urban scale on community resilience and housing recovery

  • Basaglia, Alberto
  • Aprile, Alessandra
  • Spacone, Enrico
  • Pelà, Luca
European historical city centers are particularly prone to natural disasters. This is due to the fragility of structures that often times do not comply with seismic codes; the high constructions’ density that causes induced damage; and the historical relevance of buildings that makes difficult the enacting of mitigation strategies. In Italy, major earthquake caused extensive damages over the last century. Seismic events have a huge impact on the Nation’s economy growth due to direct and indirect impacts, such as for example the high reconstruction costs or the business interruption spread out over a long period, respectively. In addition, the duration of recovery can affect the population wellbeing and cause permanent displacement. For this reason, the preventive planning of disaster management strategies are crucial to mitigate the damage and enhance resilience. Proposed strategies have to be effective and economically sustainable. In this paper, two towns affected by the 2012 Northern Italy Earthquake are chosen to analyze the reconstruction process. Using information published on the town journal, relevant aspects of the community resilience are highlighted. In particular, the housing recovery, i.e. the return of displaced people to a permanent housing solution is investigated. Then, a suite of seismic mitigation strategies is proposed for both cities, taking into account the peculiarity of the built environment and the damage distribution available thanks to the post-event buildings’ inspection. The effectiveness of the proposed strategies is assessed through a cost-benefit analysis, highlighting optimal solutions to reduce the economic and social losses., This work was supported by the FAR funding of the University of Ferrara, 2015, “Historical Centers Livable and Sustainable” (HC-LIVE)” and by the scholarship of the University “G. D’Annunzio” Chieti-Pescara, 2019, “Risk Assessment of the Built Heritage at the Urban Scale” (Ref. Num. 0002299). The fourth Author would like to acknowledge the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government, the State Agency of Research (AEI), and the European Regional Development Fund (ERDF) through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, Ref. Num. RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima::13.1 - Enfortir la resiliència i la capacitat d’adaptació als riscos relacionats amb el clima i els desastres naturals a tots els països, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Data analysis using ARX models applied to static structural health monitoring of the Monastery of Sant Cugat

  • Makoond, Nirvan Chandra
  • Pelà, Luca
  • Molins i Borrell, Climent
  • Roca Fabregat, Pedro
The church of the monastery of Sant Cugat close to Barcelona is a medieval construction characterized by a complex structural behaviour stemming from the interaction among various structural elements built over different periods. Despite having survived for several centuries, such structures are often affected by slow irreversible deterioration mechanisms that can jeopardise their stability in the future. In order to identify such mechanisms at an early stage, and to better understand the cause of visible pathologies, a static structural health monitoring (SHM) system was installed in the church since 2017. Although this monitoring strategy, aimed at the continuous measurement of key slow-varying parameters, has been used successfully in the past to facilitate the diagnosis of this structural typology, the interpretation of data collected by such systems remains a challenging task. One of the main reasons for this is the fact that many monitored damage and deformation features are sensitive to changes caused by environmental conditions. To address this issue, this paper presents the application of a fully automated data analysis procedure to the records collected from the SHM system installed in the church of the monastery of Sant Cugat. The procedure consists of two parts. The first relies on the identification of models that comprehend an Auto-Regressive output and an eXogenous input (ARX) to represent the dynamics of each monitored response using suitable environmental parameters as predictors. The identified models are then used to estimate filtered evolution rates. The second part of the procedure involves classifying each monitored response into pre-defined evolution states based on outcomes from the first part. The main results from the application to the case of the church of the monastery of Sant Cugat are presented and the implications for the diagnosis of the structure are discussed., This research has received financial support from the City Council of Sant Cugat (Ajuntament de Sant Cugat) through a project aimed at monitoring the structure of the church of the monastery of Sant Cugat (ref. num. C-10764). The authors also gratefully acknowledge the financial support from the Ministry of Science, Innovation and Universities of the Spanish Government (MCIU), the State Agency of Research (AEI), as well as the ERDF (European Regional Development Fund), through the SEVERUS project (Multilevel evaluation of seismic vulnerability and risk mitigation of masonry buildings in resilient historical urban centres, ref. num. RTI2018-099589-B-I00). Support from the AGAUR agency of the Generalitat de Catalunya and the European Social Fund, in the form of a pre-doctoral grant awarded to the corresponding author is also gratefully acknowledged., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Investigation on experimental techniques for the mechanical characterization of brick masonry

  • Roca Fabregat, Pedro
  • Pelà, Luca
One of the main difficulties found in the assessment and verification of masonry historical structures lays in the characterization of the main mechanical properties of the material components (units and mortar) and masonry as composite material. In an attempt to provide possible approaches for mechanical characterization, the paper presents and discusses different Minor Destructive Tests (MDTs) oriented to the measurement of the compressive strength of mortar bed joints and masonry composite samples extracted from existing brick masonries. The MDTs discussed for mortar characterization are the Double Punch Test (DPT), the Windsor Pin Penetration Test (PPT) and the Helix Screw Pull-Out Test (HPT). The method presented for the characterization of masonry as composite encompasses laboratory tests on cylindrical core samples. Different types of cylindrical samples, corresponding to alternative sizes and geometrical joint configurations, are investigated based on-purpose built laboratory walls and from a set of real case studies. The proposed MDTs are appraised with regard to their reliability and real applicability., The authors gratefully acknowledge the financial support provided by the Ministry of Economy and Competitiveness and from the Ministry of Science, Innovation and Universities (MCIU) of the Spanish Government and the State Agency of Research (AEI), as well as that of the European Regional Development Fund (FEDER) through projects MULTIMAS (BIA2015-63882-P) and SEVERUS (RTI2018-099589-B-I00)., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles::11.4 - Redoblar els esforços per a protegir i salvaguardar el patrimoni cultural i natural del món, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Estudio experimental de soluciones basadas en TRM/SRG y su aplicación a casos reales

  • Garcia Ramonda, Larisa
  • Sánchez Martínez, José Luis
  • Cobo, Juan
  • Soria, Miguel Ángel
  • Castellano, Miguel Ángel
El presente trabajo se centra en la caracterización experimental de materiales innovadores basados en la tecnología Textile Reinforced Mortar (TRM) y Steel Reinforced Grout (SRG) para su uso como refuerzo estructural para mejorar la resistencia en el plano de muros portantes de obra fábrica de ladrillo en edificios existentes. El programa experimental consistió en la construcción de 12 muros de doble hoja de ladrillo macizo de arcilla hechos a mano y juntas de mortero de baja resistencia de cal hidráulica, una tipología recurrente en los edificios históricos de los países mediterráneos. Los muros se ensayaron en dos configuraciones: no reforzadas y reforzadas. Los muros fueron reforzados mediante TRM con malla basalto de baja densidad (LDB) y SRG con acero de ultra alta resistencia de baja densidad (LDS), colocados superficialmente y con una configuración simétrica. De los 12 muros, 6 fueron ensayados mediante compresión diagonal y 6 mediante el ensayo de corte y compresión. Los resultados de la investigación ponen en relieve la eficacia de las soluciones de refuerzo investigados para aumentar la resistencia y la ductilidad de la obra de fábrica de ladrillo., Los autores agradecen el apoyo financiero del Ministerio de Ciencia, Innovación y Universidades (MCIU) del Gobierno de España, de la Agencia Estatal de Investigación (AEI) y del Fondo Europeo de Desarrollo Regional (FEDER) a través del proyecto SEVERUS ("Evaluación multinivel de la vulnerabilidad sísmica y mitigación del riesgo de edificios de mampostería en centros urbanos históricos resilientes", ref. num. RTI2018-099589-BI00), y de Kerakoll Ibérica S.A. a través del proyecto de RTD A-01217. También se agradece el apoyo de la Secretaria d'Universitats i Investigació de la Generalitat de Catalunya a través de una beca predoctoral concedida al primer autor., Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Postprint (published version)