Pasar al contenido principal

TECNOLOGIAS PARA SENSORES DE FIBRA OPTICA I

TEC2010-20224-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Versatile all-fiber slow-light assisted sensor

  • Bravo, M.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
We present theoretical and experimental results on a slow-light assisted all-fiber configuration that can be used for efficient sensing of a variety of parameters (pressure, displacement...). In particular, we report here a structure that can be transformed into a slow-light assisted displacement sensor capable of sub-micrometric resolution values with a potentially simple intensiometric measurement scheme. The basic element in the structure is a lossy ring resonator tuned close to the critical coupling regime. In this working regime, the resonator transfer function displays extremely high group delay values close to the resonances, and, accordingly, a large sensitivity to additional losses. A mechanic transducer transforms displacement into small additional losses in the ring. This leads to strong variations in the log transmission of the resonances, which are shown to scale with the group index. This scheme shows orders of magnitude sensitivity enhancements over a conventional bending-loss configuration. We believe that this structure can be further developed to provide large sensitivity enhancements to conventional intensiometric fiber sensors., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Turning a low Q fiber resonator into a high-sensitivity displacement sensor using slow light concepts

  • Bravo, M.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
High-Q resonators have been widely used for sensing purposes. High Q factors normally lead to sharp spectral peaks which accordingly provide a strong sensitivity in spectral interrogation methods. In this work we employ a low-Q ring resonator to develop a high sensitivity sub-micrometric resolution displacement sensor. We use the slow-light effects occurring close to the critical coupling regime to achieve high sensitivity in the device. By tuning the losses in the cavity close to the critical coupling, extremely high group delay variations can be achieved, which in turn introduce strong enhancements of the absorption of the structure. We first validate the concept using an Optical Vector Analyzer (OVA) and then we propose a simple functional scheme for achieving a low-cost interrogation of this kind of sensors., European Commission, Ministerio de Ciencia e Innovación, Comunidad de Madrid, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Wide range group delay tuning in lossy fiber ring resonators

  • Angulo Vinuesa, Xabier
  • Bravo, M.
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
22nd International Conference on Optical Fiber Sensors, OFS 2012, Beijing, China, 15-19 Oct. 2012, We demonstrate theoretically and experimentally that a wide-range tuning of group delay values can be achieved in a lossy fiber ring resonator. The tuning mechanism relies simply on varying the loss/coupling ratio in the resonator. This simple structure may be used advantageously in different regimes for many sensing configurations, both for achieving extremely high sensitivity enhancements (by working close to critical coupling, where the group index becomes extremely large) or suppression of undesired refractive index effects (e.g. Kerr effect), by working in the under-coupled regime., Ministerio de Ciencia e Innovación, Comunidad de Madrid
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Compound lasing fiber optic ring resonators for sensing

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel
  • López-Amo Sáinz, Manuel
In this work, we present a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is rendered close to perfect by creating an external lasing ring resonator with matched spectral response. The resulting lasers allow the stable interrogation of the sensors with an impressive sensitivity enhancement. In our experiments, the dynamic range of the intensity sensor (and consequently its sensitivity) is increased 15 dB by using this laser-based interrogation system. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on external interrogation, our method is >100 times more stable and also simpler, as no wavelength tunable elements are required., The authors would like to acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia through projects TEC2010-20224-C02-01, TEC2012-37958-C02-01 and Innocampus; from the European FEDER funding through ECOAL-MGT SUDOE project and from the European Research Council through Starting Grant U-FINE (Grant No. 307441).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Characterization of a hybrid Fabry-Pérot Cavity based on a four-bridge double-Y-shape-core microstructured fiber

  • Rodrigues Pinto, Ana Margarida
  • López Aldaba, Aitor
  • López-Amo Sáinz, Manuel
  • Frazão, Orlando
  • Santos, José Luís
  • Baptista, José Manuel
  • Baierl, Hardy
  • Auguste, Jean-Louis
  • Jamier, Raphael
  • Roy, Philippe
In this work, a hybrid Fabry-Perot interferometer based on a novel four-bridge microstructured fiber is presented and characterized. The characterization of this cavity is performed in the L-band using two different instruments: an optical spectrum analyzer and an optical backscatter reflectometer. The Fabry-Perot output signal presents linear variation with temperature changes (sensitivity 9.8-11.9 pm/ºC), variation with the polarization states of light and high stability., The authors are grateful to the Spanish Government projects TEC2010-20224-C02-01, Innocampus; European COST action-TD1001: OFSeSa and the INTERREG SUDOE Project "ECOAL-MGT - Ecological Management of Coal Waste Piles, SOE3/P2/P714".
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Dynamic BOTDA measurements using Brillouin phase-shift

  • Urricelqui Polvorinos, Javier
  • Zornoza Indart, Ander
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a novel dynamic BOTDA sensor based, for the first time to our knowledge, on the use of the Brillouin phase-shift instead of the conventional Brillouin gain. This provides the advantage of measurements that are largely immune to variations in fiber attenuation or changes in pump pulse power. Furthermore, the optical detection deployed can lead to an enhanced precision or measurement time and to the broadening of the measurement range. Proof of concept experiments demonstrate 1.66 kHz measurement rate with 1 m resolution over a 160 m sensing fiber length., The authors wish to acknowledge financial support from the Spanish Ministerio de Educación y Ciencia through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

High sensitive micro-displacement intensity fiber sensor by using a multiwavelength erbium doped fiber ring laser based on optical add-drop multiplexers

  • Pérez Herrera, Rosa Ana
  • Leandro González, Daniel
  • López-Amo Sáinz, Manuel
In this work, a wavelength division multiplexed fiber ring laser, based on optical add-drop multiplexers to interconnect intensity sensors has been experimentally demonstrated. Three different laser lines were obtained simultaneously all with an optical signal to noise ratio higher than 30dB. This proposed configuration is based on commercial devices and is adapted to the ITU channels normative. By using this configuration each sensor was associated with a different wavelength directly offered by each OADM and a reference wavelength was also included in order to distinguish between power variations induced by the transducer or to detect a fiber failure. This sensor system has been experimentally verified by using microbending sensors obtaining experimental slope sensitivity as good as -0.327dB/µm., This work was supported by the Spanish Government project TEC2010-20224-C02-01 and the European SUDOE-Interreg Project ECOAL-MGT.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous measurement of strain and temperature using a unique LPG-coupled fibre laser scheme

  • Leandro González, Daniel
  • Ams, Martin
  • López-Amo Sáinz, Manuel
  • Sun, Tong
  • Grattan, Kenneth T. V.
In this work, we present and demonstrate a novel sensor system for simultaneous measurement of strain and temperature through a unique combination of a long period grating (LPG) and a fibre laser based on a fibre Bragg grating (FBG). In order to achieve this, a new erbium doped fibre laser (EDFL) structure is created, showing an optical signal-to-noise ratio (OSNR) of 55 dB and a peak power measured on the OSA between -5 and 0 dBm. The strain and the temperature variation applied on the FBG and the LPG can be monitored through both the fibre laser wavelength shift and the change of the power level of a unique emission line, both showing a clear linear behaviour., The authors would like to thank the support of the Spanish Ministerio de Ciencia e Innovación within project TEC2010-20224-C02-01 and the COST action TD1001.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Simultaneous strain and temperature measure based on a single suspended core photonic crystal fiber

  • Rota Rodrigo, Sergio
  • López-Amo Sáinz, Manuel
  • Kobelke, J.
  • Schuster, Kay
  • Santos, José Luís
  • Frazão, Orlando
In this work a simultaneous strain and temperature sensor based on a suspended core fiber is proposed. The sensor comprises a 3mm suspended core PCF between SMFs and is based on the combination of two multimodal interferences with different frequency fringe patterns. The interference of the both signal has different sensitivity responses to strain and temperature. Thought a low-pass frequency filtering of the detected spectrum, the wavelength shift of the two interferences can be measured allowing the discrimination of strain and temperature simultaneously. The resolutions of this sensor are 0.45 ºC and 4.02 με., The authors are grateful to the Spanish government project TEC2010-20224-C02-01, to the European Cooperation in Science and Technology (COST) Action TD1001, and Project "NORTE-07-0124-FEDER-000058" that is financed by the North Portugal Regional Operational Programme (ON.2 – O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF), and by national funds, through the Portuguese funding agency, Fundação para a Ciência e a Tecnologia (FCT).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Polarization diversity for Brillouin distributed fiber sensors based on a double orthogonal pump

  • Urricelqui Polvorinos, Javier
  • López Fernandino, Felipe
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a novel Brillouin optical time domain analysis sensor deploying a polarization diversity technique which eliminates the need for polarization scrambling, providing measurements that are largely immune to the state of polarization of the probe wave and the pump pulses throughout the sensing fiber. This can be exploited to reduce the measurement time or can lead to an enhanced precision. Proof of concept experiments demonstrate a 651 Hz sampling rate with 1m resolution over a 930m sensing fiber., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Fully-switchable multi-wavelength fiber laser based interrogator system for remote and versatile fiber optic sensors multiplexing structures

  • Bravo Acha, Mikel
  • Miguel Soto, Verónica de
  • Ortigosa Cayetano, Amaia
  • López-Amo Sáinz, Manuel
A novel interrogation system for multiple fiber optic sensor technologies and based on a fully-switchable multiwavelength fiber laser (MWFL) is proposed and experimentally demonstrated. The MWFL can generate any wavelength combination with a minimum emission line distance up to 50 GHz fitting the ITU grid specifications. On the other hand, as proof of concept sensor network, two different networks were multiplexed by using a remote powered by light fiber optic switch. They are based on two different sensor technologies. One of them based on PCF intensity sensors and multiplexed by using an 8 port WDM and the other one based on wavelength temperature/strain FBG sensors., This work was supported by the Spanish Ministry of Science and Innovation through project TEC2010-20224-C02-01.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Egituren egoeraren monitorizaziorako zuntz optikoan oinarritutako sentsore sinplifikatua

  • Iribas Pardo, Haritz
  • Sagüés García, Mikel
  • Mariñelarena Ollacarizqueta, Jon
  • Loayssa Lara, Alayn
Brillouin hedatuko denbora eremu optikoaren analisian (BOTDA) oinarritutako sentsoreak, estruktura handien (100 km luzerako estrukturak) deformazioa eta tenperatura neurtzeko gaitasuna dute. Lan honetan, BOTDA konfigurazio sinplifikatua aurkezten dugu. Erabilitako konfigurazioaren helburua sentsorearen prezioa murriztea da, detekzio prozesuan parte hartzen duten seinale optikoen sortze prozesua sinplifikatuz. Proposatutako teknika hau, iturri optiko bati irrati-maiztasun (IM) pultsu modulatu bat aplikatuz sortutako osagai espektralen iragazketa optiko pasiboan oinarritzen da. Laborategiko esperimentuek frogatzen dute tenperatura hedatuko neurriak 1,1 metroko erresoluzioarekin 5 km zuntz optikoan zehar, Distributed Brillouin optical time domain analysis (BOTDA) sensors can provide high precision distributed measurements of the strain and temperature profile over extremely large structures (structures of 100 km). In this work, we present a simplified configuration for BOTDA sensors. The aim of this configuration is to reduce the cost of the sensor by simplifying the generation of the optical waves involved in the sensing process. The proposed technique is based on passive optical filtering of the spectral components generated in an RF-pulse-modulated optical source. Proof of concept experiments demonstrate distributed temperature measurement with 1.1 m resolution over a 5 km sensing fiber, Los autores agradecen al Ministerio de Ciencia e Innovación (a través del proyecto TEC2010-20224-C02-01) y a la Universidad Pública de Navarra la financiación recibida.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Phasorial DPP-BOTDA sensor tolerant to non-local effects

  • Urricelqui Polvorinos, Javier
  • Mariñelarena Ollacarizqueta, Jon
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We introduce a modification of the differential pulse width pair technique in a BOTDA sensor based on a phase modulated probe wave and RF demodulation. This provides a differential Brillouin phasorial signal with high spatial and spectral resolution in both components (magnitude and phase shift). Moreover, the use of a phase modulated probe wave provides RF phase shift measurements tolerant to the emergence of non local effects. The combination of both techniques can lead to the development of long range BOTDA sensors. Proof of concept experiments demonstrate RF phase shift measurements with 1m spatial resolution over 50km and an uncertainty of 1.3ºC at the worst contrast position., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Reinforced concrete structural corrosion monitoring using Hi-Bi photonic crystal fibres in a fiber loop structure

  • Bravo Acha, Mikel
  • McCague, Colum
  • Fabian, Matthias
  • Jaroszewicz, Leszek R.
  • Mergo, Paweł
  • Sun, Tong
  • Grattan, Kenneth T. V.
  • López-Amo Sáinz, Manuel
A novel sensing approach has been developed for in-situ corrosion monitoring of steel reinforced concrete structures, using an interferometric Sagnac sensor system based on a Hi-Bi photonic crystal fibre (PCF). To do so an accurate fibre alignment procedure has been implemented in order to improve the performance of the sensor system embedded into the concrete structure when it is subjected to an accelerated corrosion test. The positive results obtained have confirmed the effectiveness of such a sensor system for applications in structural health monitoring., This work was supported by the Spanish Ministry project TEC2010-20224-C02-01 and by the COST Action TD1001: Novel and Reliable Optical Fiber Sensor Systems for Future Security and Safety Applications (OFSeSa).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Phase-shift based BOTDA measurements tolerant to non-local effects

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a BOTDA sensor based on the use of the Brillouin phase shift that performs measurements tolerant to non local effects. This technique raises opportunities to increase the distance covered by these sensors and the maximum optical power of the probe wave injected to the fiber. As a result, the system has the potential to increase the SNR achieved at the last meters of the fiber. Proof-of-concept experiments demonstrate unaltered measurements of the phase shift spectrum in a 20Km long fiber for large frequency-dependent distortions of the pump pulse., The authors wish to acknowledge financial support from the Spanish Ministerio de Educación y Ciencia through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Control of the strain sensitivity using a suspended core photonic crystal fiber sensing head

  • Rota Rodrigo, Sergio
  • López-Amo Sáinz, Manuel
  • Kobelke, J.
  • Schuster, Kay
  • Santos, José Luís
  • Frazão, Orlando
In this work a strain sensor based on a suspended core fiber is proposed. The sensor comprises a suspended core PCF between SMFs and is based on the multimode interference generated in these transitions. A strain sensitivity study for different sensing heads and stage separation lengths was carried out showing a sensitivity of -2.42 pm/με for the best case. Also the sensing head was tested for curvature and temperature, showing in the first case that it is insensitive to curvature effects, and secondly, that for small sensor lengths it was insensitive to temperature variations., The authors are grateful to the Spanish government project TEC2010-20224-C02-01, to the European Cooperation in Science and Technology (COST) Action TD1001, and Project "NORTE-07-0124-FEDER-000058" that is financed by the North Portugal Regional Operational Programme (ON.2 – O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF), and by national funds, through the Portuguese funding agency, Fundação para a Ciência e a Tecnologia (FCT).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Brillouin distributed sensing assisted by Brillouin amplification of pump pulses

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
Trabajo presentado a IEEE Sensors 2014, celebrado en Valencia (España) del 2 al 5 de noviembre de 2014., We demonstrate, for the first time to our knowledge, the extension of the measurement range of Brillouin distributed sensors (BDS) by using a distributed Brillouin amplifier (DBA) to compensate the attenuation of the sensor's pump pulses. The technique is based on injecting an extra DBA pump wave in the fiber to generate an additional Brillouin interaction to that used for sensing. Moreover, the bandwidth of the DBA is tailored to fit that of the pump pulses by deploying a wavelength modulation of the DBA pump that is synchronized to the pump. Experimental proof of concept results demonstrate a fivefold enhancement of the measurement range of a BDS, from 10.36 km to more than 50 km in this particular case. Moreover, it is found that the use of the DBA does not introduce any significant penalty in the detection signal to noise ratio, highlighting the potential of the technique to provide much larger sensing lengths., The authors wish to acknowledge the financial support from the Universidad Pública de Navarra and Spanish Ministerio de Ciencia e Innovación through the projects TEC2010-20224- C02-01 and TEC2013-47264-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Synthesis of virtual Brillouin frequency shift profiles in BOTDA sensors using optical source dithering

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a novel concept for Brillouin optical time domain analysis sensors that is based on synthesizing a virtual Brillouin frequency shift profile along the sensing fiber. The technique is based on modulating the wavelength of the optical source with a periodic waveform that is synchronized to the pump pulse. Application of this new tool to the compensation of non local effects and Brillouin induced noise in distributed sensors is experimentally demonstrated., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.