Pasar al contenido principal

APLICACION DEL LASER FEMTO FIBRE COMB A LA METROLOGIA DE FRECUENCIAS PARA COMUNICACIONES OPTICAS

TEC2009-14423-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hot spot detection over 100 km with 2 meter resolution in a Ramanassisted Brillouin distributed sensor

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We have developed a long-range Brillouin distributed sensor featuring 100 km measuring distance with 2 meter resolution. To our knowledge, this is the first time that a high-resolution setup reaches the barrier of 100 km measurement range. The key improvements with respect to previous configurations are explained., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Raman-assisted Brillouin optical time-domain analysis with sub-meter resolution over 100 km

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
Sub-meter resolution in long-distance Brillouin Optical Time Domain Analysis (BOTDA) cannot be trivially achieved due to several issues including: resolution-uncertainty trade-offs, self-phase modulation, fiber attenuation, depletion, etc. In this paper we show that combining Raman assistance, differential pulse-width pair (DPP) measurements and a novel numerical de-noising procedure, we could obtain sub-meter resolution Brillouin optical time-domain analysis over a range of 100 km. We successfully demonstrate the detection of a 0.5 meter hot-spot in the position of worst contrast along the fiber., Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Raman-Assisted Brillouin Distributed Temperature Sensor Over 100 km Featuring 2 m Resolution and 1.2 C Uncertainty

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman assistance in distributed sensors based on Brillouin optical time-domain analysis can significantly extend the measurement distance. In this paper, we have developed a 2 m resolution long-range Brillouin distributed sensor that reaches 100 km using first-order Raman assistance. The estimated uncertainty in temperature discrimination is 1.2 °C, even for the position of worst contrast. The parameters used in the experiment are supported by a simple analytical model of the required values, considering the main limitations of the setup., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Signal-to-Noise Ratio Improvement in BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin optical time domain analysis (BOTDA) relies typically on the interaction among two counter-propagating waves: 1) a pulsed pump wave and 2) a modulated probe wave. The modulated probe wave has typically two sidebands, located at ±νB with respect to the pump frequency. Conventional systems detect the time-resolved gain/loss by detecting only the upper/lower wavelength sideband. In this letter, we show that BOTDA can strongly benefit from the use of balanced detection among the two sidebands. In particular, the detected signal can be doubled while the noise only grows by a factor of (2)1/2, leading to a (2)1/2 signal-to noise ratio (SNR) increase. Moreover, any common-mode noise in the probe signal path (e.g., master laser noise, modulator drifts, and so forth) is eliminated, rendering the system more robust. We validate the principle by experimental results that highlight the benefits of the technique in terms of the SNR., Comunidad de Madrid, Ministerio de Ciencia e Innovación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

High-resolution Raman-assisted Brillouin sensor based on Differential Pulse-width Pair Technique

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
High sensing resolution in long-distance distributed fiber optic sensors, such as Brillouin Optical Time Domain Analysis (BOTDA), cannot be trivially achieved due to several issues including self-phase modulation, resolution-uncertainty trade-offs and fiber attenuation. These problems could be fixed by the use of differential pulse-pair techniques in combination with Raman amplification. In this work we present a Differential Pulse-width Pair (DPP) Raman-assisted BOTDA sensor, that can achieve 1 meter resolution in a 100 km range., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sensor de temperatura BOTDA asistido por Raman, de 2 metros de resolución sobre 100 km de distancia con incertidumbre de 1,2ºC

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • González Herráez, Miguel|||0000-0003-2555-2971
Para aumentar significativamente los rangos de medida de los sensores distribuidos basados en tecnología BOTDA (Brillouin Optical Time Domain Analysis) se puede emplear la amplificación Raman. En este trabajo hemos desarrollado un sensor de temperatura distribuido Brillouin asistido por amplificación Raman de 1er orden capaz de monitorizar 100 km de longitud con una resolución de 2 metros. La incertidumbre en cuanto a discriminación de temperatura es de 1,2ºC, incluso en la región de menor contraste. Los valores de los parámetros empleados en este experimento están respaldados por un sencillo modelo analítico, considerando las mayores limitaciones del montaje., In order to increase significantly the measuring range of the distributed sensors based on Brillouin Optical Time Domain Analysis (BOTDA) technology it is possible to employ Raman assistance. In this work we have developed a distributed Brillouin temperature sensor assisted by first-order Raman amplification that measures 100 km range with 2 meter resolution. The uncertainty in temperature discrimination is 1.2oC, even for the position of worst contrast. The parameters used in the experiment are supported by a simple analytical model of the required values, considering the main limitations of the setup., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

100 km BOTDA temperature sensor with sub-meter resolution

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
22nd International Conference on Optical Fiber Sensors (OFS2012), Beijing, China | October 14, 2012, Temperature or strain sensing in long-range (> 70 km) Brillouin Optical Time Domain Analysis (BOTDA) below 2 meter resolution cannot be trivially achieved due to numerous matters such as fiber attenuation, self-phase modulation, depletion, resolution-uncertainty trade-offs, etc. In this paper we show that combining Raman assistance and the Differential Pulse-width Pair (DPP) technique sub-metrical resolution is achievable in a BOTDA over 100 km sensing range. We successfully demonstrate the detection of a 0.5 meter hot-spot in the position of worst contrast along the fiber., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Wide range group delay tuning in lossy fiber ring resonators

  • Angulo Vinuesa, Xabier
  • Bravo, M.
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
22nd International Conference on Optical Fiber Sensors, OFS 2012, Beijing, China, 15-19 Oct. 2012, We demonstrate theoretically and experimentally that a wide-range tuning of group delay values can be achieved in a lossy fiber ring resonator. The tuning mechanism relies simply on varying the loss/coupling ratio in the resonator. This simple structure may be used advantageously in different regimes for many sensing configurations, both for achieving extremely high sensitivity enhancements (by working close to critical coupling, where the group index becomes extremely large) or suppression of undesired refractive index effects (e.g. Kerr effect), by working in the under-coupled regime., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analysis over a 240 km-long fiber loop with no repeater

  • Angulo Vinuesa, Xabier
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • Chin, S.H.
  • Ania Castañón, Juan Diego
  • Corredera Guillén, Pedro
  • Rochat, Etienne
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
22nd International Conference on Optical Fiber Sensors (OFS2012), Beijing, China, October 14, 2012., In this paper we combine the use of optical pulse coding and seeded second-order Raman amplification to extend the sensing distance of Brillouin optical time-domain analysis (BOTDA) sensors. Using 255-bit Simplex coding, the power levels of the Raman pumps and the Brillouin pump and probe signals were adjusted in order to extend the real physical sensing distance of a BOTDA sensor up to 120 km away from the sensor interrogation unit, employing a 240-km long loop of standard single-mode fiber (SSMF) with no repeater. To the best of our knowledge, this is the first time that distributed measurements are carried out over such a long distance with no active device inserted into the entire sensing loop, constituting a considerable breakthrough in the field., Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission, Swiss Commission for Technology and Innovation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Balanced detection in Brillouin optical time domain analysis

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We propose the use of balanced detection in Brillouin Optical Time Domain Analysis (BOTDA) sensors. Balanced detection can be effectively accomplished among the Stokes and anti-Stokes bands in the probe signal. This type of detection leads to a doubling of the trace amplitude and at least a √2 increase in signal to noise ratio over the conventional configuration. Moreover, it leads to a complete cancellation of the common-mode noise in the probe signal, including relative intensity noise in Raman-assisted configurations. We show all these benefits both theoretically and experimentally, Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Extending the real remoteness of long-range brillouin optical time-domain fiber analyzers

  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Chin, S.H.
  • Ania Castañón, Juan Diego
  • Corredera Guillén, Pedro
  • Rochat, Etienne
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
The real remoteness of a distributed optical fiber sensor based on Brillouin optical time-domain analysis is considerably extended in this paper using seeded second-order Raman amplification and optical pulse coding. The presented analysis and the experimental results demonstrate that a proper optimization of both methods combined with a well-equalized two-sideband probe wave provide a suitable solution to enhance the signal-to-noise ratio of the measurements when an ultra-long sensing fiber is used. In particular, the implemented system is based on an extended optical fiber length, in which half of the fiber is used for sensing purposes, and the other half is used to carry the optical signals to the most distant sensing point, providing also a long fiber for distributed Raman amplification. Power levels of all signals launched into the fiber are properly optimized in order to avoid nonlinear effects, pump depletion, and especially any power imbalance between the two sidebands of the probe wave. This last issue turns out to be extremely important in ultra-long Brillouin sensing to provide strong robustness of the system against pump depletion. This way, by employing a 240 km-long optical fiber-loop, sensing from the interrogation unit up to a 120 km remote position (i.e., corresponding to the real sensing distance away from the sensor unit) is experimentally demonstrated with a spatial resolution of 5 m. Furthermore, this implementation requires no powered element in the whole 240 km fiber loop, providing considerable advantages in situations where the sensing cable crosses large unmanned areas., Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Distributed Brillouin fiber sensor assisted by first-order Raman amplification

  • Rodríguez Barrios, Félix
  • Martín López, Sonia|||0000-0001-5203-6206
  • Carrasco-Sanz, A.
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We review some recent results on the application of distributed Raman amplification schemes, including ultralong lasers, to the extension of the operating range and contrast in Brillouin optical time domain analysis (BOTDA) distributed sensing systems., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Brillouin optical time-domain analysis assisted by second-order Raman amplification

  • Martín López, Sonia|||0000-0001-5203-6206
  • Alcón-Camas, M.
  • Rodríguez, F.
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We propose and experimentally demonstrate a new method to extend the range of Brillouin optical time domain analysis (BOTDA) systems. It exploits the virtual transparency created by second-order Raman pumping in optical fibers. The idea is theoretically analyzed and experimentally demonstrated in a 50 km fiber. By working close to transparency, we also show that the measurement length of the BOTDA can be increased up to 100 km with 2 meter resolution. We envisage extensions of this technique to measurement lengths well beyond this value, as long as the issue of relative intensity noise (RIN) of the primary Raman pump can be avoided., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid