Pasar al contenido principal

APLICACION DEL LASER FEMTOCOMB AL ESTUDIO DE ESTRUCTURAS SEMICONDUCTORAS PARA COMUNICACIONES OPTICAS

TEC2009-14423-C02-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ALCALA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Kerr effect in structured superluminal media

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Caucheteur, C.
  • Kinet, D.
  • Wuilpart, M.
  • Denisov, A.
  • Chin, S.H.
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
Kerr effect accounts for the change in refractive index of a material with the light intensity and appears in all known optical materials. In this work we analyze Kerr effect in structured superluminal media (e.g some specific types of resonators). We show that Kerr effect in these structures can be cancelled or even reversed (in comparison with the Kerr effect of the material composing the structure) depending on the group index of the structure. We also discuss some possible realizations of structured superluminal media., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hot spot detection over 100 km with 2 meter resolution in a Ramanassisted Brillouin distributed sensor

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We have developed a long-range Brillouin distributed sensor featuring 100 km measuring distance with 2 meter resolution. To our knowledge, this is the first time that a high-resolution setup reaches the barrier of 100 km measurement range. The key improvements with respect to previous configurations are explained., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Raman-assisted Brillouin optical time-domain analysis with sub-meter resolution over 100 km

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
Sub-meter resolution in long-distance Brillouin Optical Time Domain Analysis (BOTDA) cannot be trivially achieved due to several issues including: resolution-uncertainty trade-offs, self-phase modulation, fiber attenuation, depletion, etc. In this paper we show that combining Raman assistance, differential pulse-width pair (DPP) measurements and a novel numerical de-noising procedure, we could obtain sub-meter resolution Brillouin optical time-domain analysis over a range of 100 km. We successfully demonstrate the detection of a 0.5 meter hot-spot in the position of worst contrast along the fiber., Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Raman-Assisted Brillouin Distributed Temperature Sensor Over 100 km Featuring 2 m Resolution and 1.2 C Uncertainty

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
Raman assistance in distributed sensors based on Brillouin optical time-domain analysis can significantly extend the measurement distance. In this paper, we have developed a 2 m resolution long-range Brillouin distributed sensor that reaches 100 km using first-order Raman assistance. The estimated uncertainty in temperature discrimination is 1.2 °C, even for the position of worst contrast. The parameters used in the experiment are supported by a simple analytical model of the required values, considering the main limitations of the setup., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Signal-to-Noise Ratio Improvement in BOTDA Using Balanced Detection

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Brillouin optical time domain analysis (BOTDA) relies typically on the interaction among two counter-propagating waves: 1) a pulsed pump wave and 2) a modulated probe wave. The modulated probe wave has typically two sidebands, located at ±νB with respect to the pump frequency. Conventional systems detect the time-resolved gain/loss by detecting only the upper/lower wavelength sideband. In this letter, we show that BOTDA can strongly benefit from the use of balanced detection among the two sidebands. In particular, the detected signal can be doubled while the noise only grows by a factor of (2)1/2, leading to a (2)1/2 signal-to noise ratio (SNR) increase. Moreover, any common-mode noise in the probe signal path (e.g., master laser noise, modulator drifts, and so forth) is eliminated, rendering the system more robust. We validate the principle by experimental results that highlight the benefits of the technique in terms of the SNR., Comunidad de Madrid, Ministerio de Ciencia e Innovación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

High-resolution Raman-assisted Brillouin sensor based on Differential Pulse-width Pair Technique

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
High sensing resolution in long-distance distributed fiber optic sensors, such as Brillouin Optical Time Domain Analysis (BOTDA), cannot be trivially achieved due to several issues including self-phase modulation, resolution-uncertainty trade-offs and fiber attenuation. These problems could be fixed by the use of differential pulse-pair techniques in combination with Raman amplification. In this work we present a Differential Pulse-width Pair (DPP) Raman-assisted BOTDA sensor, that can achieve 1 meter resolution in a 100 km range., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Carrier localization in InN/InGaN multiple-quantum wells with high In-content

  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Rigutti, Lorenzo
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • Ruterana, Pierre
  • Mangeney, Juliette
  • Julien, François H.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Monroy, Eva
We study the carrier localization in InN/In0.9Ga0.1N multiple-quantum-wells (MQWs) and bulk InN by means of temperature-dependent photoluminescence and pump-probe measurements at 1.55 lm. The S-shaped thermal evolution of the emission energy of the InN film is attributed to carrier localization at structural defects with an average localization energy of 12 meV. Carrier localization is enhanced in the MQWs due to well/barrier thickness and ternary alloy composition fluctuations, leading to a localization energy above 35 meV and longer carrier relaxation time. As a result, the luminescence efficiency in the MQWs is improved by a factor of five over bulk InN., European Commission, Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sensor de temperatura BOTDA asistido por Raman, de 2 metros de resolución sobre 100 km de distancia con incertidumbre de 1,2ºC

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Nuño del Campo, Javier
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • González Herráez, Miguel|||0000-0003-2555-2971
Para aumentar significativamente los rangos de medida de los sensores distribuidos basados en tecnología BOTDA (Brillouin Optical Time Domain Analysis) se puede emplear la amplificación Raman. En este trabajo hemos desarrollado un sensor de temperatura distribuido Brillouin asistido por amplificación Raman de 1er orden capaz de monitorizar 100 km de longitud con una resolución de 2 metros. La incertidumbre en cuanto a discriminación de temperatura es de 1,2ºC, incluso en la región de menor contraste. Los valores de los parámetros empleados en este experimento están respaldados por un sencillo modelo analítico, considerando las mayores limitaciones del montaje., In order to increase significantly the measuring range of the distributed sensors based on Brillouin Optical Time Domain Analysis (BOTDA) technology it is possible to employ Raman assistance. In this work we have developed a distributed Brillouin temperature sensor assisted by first-order Raman amplification that measures 100 km range with 2 meter resolution. The uncertainty in temperature discrimination is 1.2oC, even for the position of worst contrast. The parameters used in the experiment are supported by a simple analytical model of the required values, considering the main limitations of the setup., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

100 km BOTDA temperature sensor with sub-meter resolution

  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
22nd International Conference on Optical Fiber Sensors (OFS2012), Beijing, China | October 14, 2012, Temperature or strain sensing in long-range (> 70 km) Brillouin Optical Time Domain Analysis (BOTDA) below 2 meter resolution cannot be trivially achieved due to numerous matters such as fiber attenuation, self-phase modulation, depletion, resolution-uncertainty trade-offs, etc. In this paper we show that combining Raman assistance and the Differential Pulse-width Pair (DPP) technique sub-metrical resolution is achievable in a BOTDA over 100 km sensing range. We successfully demonstrate the detection of a 0.5 meter hot-spot in the position of worst contrast along the fiber., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Pulse distortion in linear slow light systems: theoretical limits and compensation strategies

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
Advances in Slow and Fast Light IV, San Francisco, California, January 22, 2011, We study analytically pulse distortion in linear slow light systems, and provide some useful limits on these devices. Additionally, we also show that the contributions of phase and amplitude broadening can be de-coupled and quantified. It is observed that phase broadening is generally smaller than amplitude broadening in conventional slow light media (lorentzian gain profile) except for very large fractional delays, where it becomes larger. Upon these expressions, we may envisage new strategies to minimize the distortion in the delaying of pulses, depending on the specific application and the required fractional delay. To overcome the residual distortion, we show that nonlinear systems can lead to a resharpening of the pulses and a re-generation of the filtered frequencies., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Wide range group delay tuning in lossy fiber ring resonators

  • Angulo Vinuesa, Xabier
  • Bravo, M.
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
22nd International Conference on Optical Fiber Sensors, OFS 2012, Beijing, China, 15-19 Oct. 2012, We demonstrate theoretically and experimentally that a wide-range tuning of group delay values can be achieved in a lossy fiber ring resonator. The tuning mechanism relies simply on varying the loss/coupling ratio in the resonator. This simple structure may be used advantageously in different regimes for many sensing configurations, both for achieving extremely high sensitivity enhancements (by working close to critical coupling, where the group index becomes extremely large) or suppression of undesired refractive index effects (e.g. Kerr effect), by working in the under-coupled regime., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Brillouin optical time-domain analysis over a 240 km-long fiber loop with no repeater

  • Angulo Vinuesa, Xabier
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • Chin, S.H.
  • Ania Castañón, Juan Diego
  • Corredera Guillén, Pedro
  • Rochat, Etienne
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
22nd International Conference on Optical Fiber Sensors (OFS2012), Beijing, China, October 14, 2012., In this paper we combine the use of optical pulse coding and seeded second-order Raman amplification to extend the sensing distance of Brillouin optical time-domain analysis (BOTDA) sensors. Using 255-bit Simplex coding, the power levels of the Raman pumps and the Brillouin pump and probe signals were adjusted in order to extend the real physical sensing distance of a BOTDA sensor up to 120 km away from the sensor interrogation unit, employing a 240-km long loop of standard single-mode fiber (SSMF) with no repeater. To the best of our knowledge, this is the first time that distributed measurements are carried out over such a long distance with no active device inserted into the entire sensing loop, constituting a considerable breakthrough in the field., Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission, Swiss Commission for Technology and Innovation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Infrared photoluminescence of high In-content InN/InGaN multiple-quantum-wells

  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Rigutti, Lorenzo
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • Lacroix, Bertrand
  • Fernández, S.
  • Ruterana, Pierre
  • Julien, François H.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Monroy, Eva
We report on the thermal evolution of the photoluminescence (PL) from high In-content InN/In0.9Ga0.1N multiple-quantum wells (MQWs) synthesized by plasma-assisted molecular-beam epitaxy on GaN-on-sapphire templates. The structural quality and the well/barrier thickness uniformity in the MQW structure are assessed by X-ray diffraction and transmission electron microscopy measurements. PL results are compared with the luminescence from a 1-µm-thick InN reference sample. In both cases, the dominant low-temperature (5 K) PL emission peaks at ∼0.73 eV with a full width at half maximum of ∼86 meV. The InN layer displays an S-shape evolution of the emission peak energy with temperature, explained in terms of carrier localization. A carrier localization energy of ∼12 meV is estimated for the InN layer, in good agreement with the expected carrier concentration. In the case of the MQW structure, an enhancement of the carrier localization associated to the piezoelectric field results in an improved thermal stability of the PL intensity, reaching an internal quantum efficiency of ∼16%., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Non-linear absorption of InN/InGaN multiple-quantum-well structures at optical telecommunication wavelengths

  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • Kandaswamy, P.K
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Calvo, V.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • Méndez, J.A.
  • Mutta, G.R.
  • Lacroix, Bertrand
  • Ruterana, Pierre
  • Monroy, Eva
We report on the nonlinear optical absorption of InN/ InxGa1−xN x=0.8, 0.9 multiple-quantum-well structures characterized at 1.55 m by the Z-scan method in order to obtain the effective nonlinear absorption coefficient 2 of the samples at high repetition rate. Saturable absorption is observed for the sample with x=0.9, with an effective 2 −9 103 cm/GW for the studied optical regime. For lower In content in the barrier, reverse saturable absorption is observed, which is attributed to two-photon absorption., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Extending the real remoteness of long-range brillouin optical time-domain fiber analyzers

  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Chin, S.H.
  • Ania Castañón, Juan Diego
  • Corredera Guillén, Pedro
  • Rochat, Etienne
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
The real remoteness of a distributed optical fiber sensor based on Brillouin optical time-domain analysis is considerably extended in this paper using seeded second-order Raman amplification and optical pulse coding. The presented analysis and the experimental results demonstrate that a proper optimization of both methods combined with a well-equalized two-sideband probe wave provide a suitable solution to enhance the signal-to-noise ratio of the measurements when an ultra-long sensing fiber is used. In particular, the implemented system is based on an extended optical fiber length, in which half of the fiber is used for sensing purposes, and the other half is used to carry the optical signals to the most distant sensing point, providing also a long fiber for distributed Raman amplification. Power levels of all signals launched into the fiber are properly optimized in order to avoid nonlinear effects, pump depletion, and especially any power imbalance between the two sidebands of the probe wave. This last issue turns out to be extremely important in ultra-long Brillouin sensing to provide strong robustness of the system against pump depletion. This way, by employing a 240 km-long optical fiber-loop, sensing from the interrogation unit up to a 120 km remote position (i.e., corresponding to the real sensing distance away from the sensor unit) is experimentally demonstrated with a spatial resolution of 5 m. Furthermore, this implementation requires no powered element in the whole 240 km fiber loop, providing considerable advantages in situations where the sensing cable crosses large unmanned areas., Ministerio de Ciencia e Innovación, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Distributed Brillouin fiber sensor assisted by first-order Raman amplification

  • Rodríguez Barrios, Félix
  • Martín López, Sonia|||0000-0001-5203-6206
  • Carrasco-Sanz, A.
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We review some recent results on the application of distributed Raman amplification schemes, including ultralong lasers, to the extension of the operating range and contrast in Brillouin optical time domain analysis (BOTDA) distributed sensing systems., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Influence of substrate biasing on the growth of c-axis oriented AlN thin films by RF reactive sputtering in pure nitrogen

  • Monteagudo Lerma, Laura
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández, S.
We report on the investigation of the influence of deposition conditions on structural, morphological and optical properties of AlN thin films deposited on sapphire (Al 2O 3) substrates by radio-frequency (RF) reactive sputtering. The deposition parameters studied are RF power, substrate temperature and substrate bias, while using pure nitrogen as reactive gas. The effect of such deposition parameters on AlN film properties are analyzed by different characterization methods as high resolution X-ray diffraction (HRXRD), field emission scanning electron microscopy (FESEM) and linear optical transmission. AlN thin films with a full-width at half-maximum (FWHM) of the rocking curve obtained for the (0002) diffraction peak of 1.2 o are achieved under optimized conditions. The time resolved evolution of the self and externally-induced biasing of the substrate during deposition process is monitored and analyzed in terms of the rate of atomic species incorporation into the layer. The bias-induced change of the atomic incorporation leads to an enhancement in the structural quality of the layer and an increase of the deposition rate., Ministerio de Ciencia e Innovación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Brillouin optical time-domain analysis assisted by second-order Raman amplification

  • Martín López, Sonia|||0000-0001-5203-6206
  • Alcón-Camas, M.
  • Rodríguez, F.
  • Corredera Guillén, Pedro
  • Ania Castañón, Juan Diego
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We propose and experimentally demonstrate a new method to extend the range of Brillouin optical time domain analysis (BOTDA) systems. It exploits the virtual transparency created by second-order Raman pumping in optical fibers. The idea is theoretically analyzed and experimentally demonstrated in a 50 km fiber. By working close to transparency, we also show that the measurement length of the BOTDA can be increased up to 100 km with 2 meter resolution. We envisage extensions of this technique to measurement lengths well beyond this value, as long as the issue of relative intensity noise (RIN) of the primary Raman pump can be avoided., Ministerio de Ciencia e Innovación, Ministerio de Fomento, Comunidad de Madrid