Pasar al contenido principal

WALKIE-TALKIE: SOPORTE A ENTORNOS DE TRANSPORTE SEGURO, INTELIGENTE Y SOSTENIBLE PARA LA FUTURA GENERACION DE COCHES INTELIGENTES

TIN2011-27543-C03-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Characterizing the driving style behavior using artificial intelligence techniques

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The On Board Diagnosis (OBD-II) standard allows accessing the vehicles’ Electronic Control Unit (ECU) easily through a Bluetooth OBD-II connector. This paper presents the DrivingStyles architecture, which adopts data mining techniques and neural networks to analyze and generate a classification of driving styles by analysing the characteristics of the driver along the route followed. The final goal is to assist drivers at correcting the bad habits in their driving behavior, while offering helpful tips to improve fuel economy. Since it is well known that smart driving can lead to a lower fuel consumption, the environmental impact is also reduced. A study involving more than 180 users is being carried out, where their real time traces (with different traffic conditions) is sent periodically to the platform. DrivingStyles is currently available on the Google Play Store platform for free download, and has achieved more than 2800 downloads from different countries in just a few months, This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Universitat Politècnica de València through the ABATIS project (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the feasibility of using smartphones for ITS safety applications

  • Tornell, Sergio M.
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Driving security and comfort can be improved by applying Intelligent Transportation Systems (ITS) proposals. The low adoption rate of new ITS hardware and software products is slowing down the market introduction of these solutions. In this paper we present a driving safety application for smartphones based on a warning dissemination protocol called eMDR. The use of smartphones minimizes the hardware cost and eliminates most of the adoption barriers; users will no longer have to install new dedicated devices in their vehicles. Instead, they will simply have to install an application in their smartphone. Our application is integrated with a Navigation System which provides access to road maps, current location, and route information. We analyzed the behavior of the wireless channel and the GPS location service under different conditions to assess the feasibility of our proposal. Results showed that, in C2C communications, smartphones are able to provide a reasonable degree of connectivity, and that the degree of precision achieved is enough for certain types of driving safety applications., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

DTB-MAC: Dynamic Token-Based MAC Protocol for reliable and efficient beacon broadcasting in VANETs

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Most applications developed for vehicular environments rely on broadcasting as the main mechanism to disseminate their messages. However, in IEEE 802.11p, which is the most widely accepted MAC protocol for vehicular communications, all transmissions remain unacknowledged if broadcasting is used. Furthermore, safety message transmission requires a strict delay limit and a high reliability, which is an issue for random access MAC protocols like IEEE 802.11p. Therefore, transmission reliability becomes the most important issue for broadcast-based services in vehicular environments. In this paper, we propose a hybrid MAC protocol, referred as Dynamic Token-Based MAC Protocol (DTB-MAC). DTB-MAC uses both a token passing mechanism and a random access MAC protocol to prevent channel contention as much as possible, and to improve the reliability of safety message transmissions. Our proposed protocol tries to select the best neighbouring node as the next transmitter, and when it is not possible, or when it causes a high overhead, the random access MAC protocol is used instead. Based on simulation experiments, we show that the DTB-MAC protocol can achieve better performance compared with IEEE802.11p in terms of channel utilization and beacon delivery ratio., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An analytical evaluation of a Map-based Sensor-data Delivery Protocol for VANETs

  • Martínez Tornell, Sergio
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The Delay Tolerant Networks (DTN) approach is considered the best strategy to address the specific issues of the VANETs, namely high mobility, variable node density or frequent radio obstacles. Several protocols have been proposed for DTNs, being the epidemic routing (and variations of it) the most representative protocol. Nevertheless, the availability of navigation systems, thanks to which each vehicle is aware of its location within a map, introduces the possibility for a new routing approach, known as Geographic Routing. In this paper we analytically evaluate the performance of our previously presented Map-based Sensor-data Delivery Protocol (MSDP). We introduce an analytical model that takes into account the effect of constrained buffers. The results show that adopting the Map-based Sensor-data Delivery Protocol (MSDP) routing mechanism allows achieving a reasonable delivery time with an insignificant overhead compared with epidemic routing., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing the impact of driving behavior on instantaneous fuel consumption

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Despite the recent technological improvements in vehicles and engines, and the introduction of better fuels, road transportation is still responsible for air pollution in urban areas due to the increasing number of circulating vehicles, and their relative travelled distances. We develop a methodology to calculate, in real-time, the consumption and environmental impact of spark ignition and diesel vehicles from a set of variables such as Engine Fuel Rate, Speed, Mass Air Flow, Absolute Load, and Manifold Absolute Pressure, all of them obtained from the vehicle’s Electronic Control Unit (ECU). Our platform is able to assist drivers in correcting their bad driving habits, while offering helpful recommendations to improve fuel economy. In this paper we will demonstrate through data mining, to what extent does the driving style really affect (negatively or positively) the fuel consumption, as well as the increase or reduction of greenhouse gas emissions generated by vehicles., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Impact of mobility on Message Oriented Middleware (MOM) protocols for collaboration in transportation

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Pérez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Message Oriented Middleware (MOM) refers to the software infrastructure that support ubiquitous information delivery among software and hardware systems. Two of the most relevant protocols in this context are AMQP and MQTT. Lately, they have been extensively used to exchange messages conserving network bandwidth, device memory and batteries. These protocols provide an abstraction of the communication programming details of the different participating system entities, alleviating their coordination and collaboration. However, these protocols have not been thoroughly tested focused on studying the impact of node mobility. In this paper we present an experimental evaluation of both protocols quantifying the effect of the node mobility in terms of message loss, latency, jitter and saturation boundary values. Based on the results obtained, we provide criteria of applicability of these protocols. This evaluation is of interest for the upcoming applications that can be supported by MOM, and in especial for communication in Machine to Machine (M2M) and Internet of Things (IoT)., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating computation offloading tradeoffs in mobile cloud computing: a sample application

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Mobile cloud computing is generally referred to as the infrastructure where both the data storage and the data processing happen outside of the mobile device. The nature of the connection between the cloud servers and the mobile host are anyway much less reliable than in classical cloud computing with static devices. A compromise must be found between local versus remote computation so to cope with the reduced performance of the data connection and with the characteristics of the mobile device, basically its power availability limitations. In this paper, we evaluate the tradeoffs of computation offloading using as a case study a facial recognition application for smartphones where recognition is a service in the cloud. We present a specifically designed application for mobile devices developed as a component of the proposed evaluation system. The intensive calculus needed for the image manipulation is compared in terms of speed and accuracy both when we delegate it to cloud computing and when we perform it locally on the mobile device. These two alternatives and the intermediate options are compared to determine the optimal settings to take better advantage of integrating these two technologies., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Validation of a vehicle emulation platform supporting OBD-II communications

  • ALVEAR ALVEAR, ÓSCAR
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
In the next few years, important developments are expected in the Intelligent Transportation Systems (ITS) area. One of the key issues enabling future solutions is achieving an effective integration between mobile apps and vehicles. Such integration can be efficiently achieved on all existing vehicles by relying on the On Board Diagnostic (OBD-II) interface. This allows obtaining critical information such as speed, fuel consumption, gas emissions and system failures. In this paper we propose a vehicle emulation platform, called VEWE, that allows developing and testing OBD-II aware applications. The advantages of this approach include: avoiding the need for a real vehicle, allowing to easily generate realistic vehicle parameter patterns, and supporting emulated GPS functionality. We evaluate our platform by conducting a performance analysis in terms of OBD-II response times and channel capacity when relying on a Bluetooth adapter. We compare our results with respect to those obtained in real vehicles, and demonstrate that our VEWE platform behaves similarly to realistic on board devices, thereby providing a complete and reliable platform for smartphone application development., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

VACaMobil: VANET Car Mobility Manager for OMNeT++

  • Báguena Albaladejo, Miguel
  • Tornell, Sergio M.
  • Torres Cortés, Álvaro
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
The performance of communication protocols in vehicular networks highly depends on the mobility pattern. Therefore, one of the most important issues when simulating this kind of protocols is how to properly model vehicular mobility. In this paper we present VACaMobil, a VANET Car Mobility Manager for the OMNeT++ simulator which allows researchers to completely define vehicular mobility by setting the desired average number of vehicles along with its upper and lower bounds. We compare VACaMobil against other common methods employed to generate vehicular mobility. Results clearly show the advantages of the VACaMobil tool when distributing vehicles in a real scenario, becoming one of the best mobility generators to evaluate the performance of different communication protocols and algorithms in VANET environments., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673, and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397, AP2009-2415.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reducing Channel Contention in Vehicular Environments Through an Adaptive Contention Window Solution

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Intelligent Transportation Systems (ITS) are attracting growing attention both in industry and academia due to the advances in wireless communication technologies, and a significant demand for a wide variety of applications targeting this kind of environments are expected. In order to make it usable in real vehicular environments, achieving a well-designed Medium Access Control (MAC) protocol is a challenging issue due to the dynamic nature of Vehicular Ad Hoc Networks (VANETs), scalability issues, and the variety of application requirements. Different standardization organizations have selected IEEE 802.11 as the first choice for VANET environments considering its availability, maturity, and cost. The contention window is a critical parameter for handling medium access collisions by the IEEE 802.11 MAC protocol, and it highly affects the communications performance. The impact of adjusting the contention window has been studied in Mobile Ad-Hoc Networks (MANETs), but the vehicular communications community has not yet addressed this issue thoroughly. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in a highway scenario show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities., This work was partially supported by the Ministerio de Ciencia e Innovacióm , Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

TGRP: Topological-Geographical Adaptive Routing Protocol for Vehicular Environments

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Vehicular networks represent an extremely variable and unpredictable environment. Scenarios can vary from very dense and congested configurations to sparsely populated arrangements. Therefore, protocols designed for such a general scope may fail to efficiently behave in certain configurations. In this paper we propose the Topological-Geographical Routing Protocol (TGRP), a novel solution that presents an adaptive behavior by using a set of standard routing strategies. According to the scenario, TGRP chooses among four different routing approaches — two-hop direct delivery, Dynamic MANET On-demand (DYMO), greedy georouting, and store-carry-andforward technique— to dynamically adapt its behavior to every situation. Performance evaluation shows that TGRP presents a more stable performance under different circumstances, being more adaptable to the changing characteristics of vehicular networks. In fact, TGRP outperforms DYMO by 10% in low density scenarios. In dense networks, TGRP also outperforms the Delay Tolerant Network (DTN) protocol by 10%., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01 and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Representative and Accurate Characterization of Inter-contact Times in Mobile Opportunistic Networks

  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
A representative characterisation of inter-contact times between nodes is essential for the performance evaluation of mobile networks. The most common characterization of inter-contact times is based on the study of the aggregate distribution of contacts between individual pairs of nodes. The problem with this aggregate distribution is that it is not always representative of the individual pair distributions, especially in the short term and when the number of nodes in the network is high. Thus, deriving results from this characterisation, can lead to inaccurate performance evaluations results. In this paper, we propose and evaluate two new methods for characterising the inter-contact times distribution in mobile networks. We prove that these characterizations have a higher representativeness, thereby improving the accuracy of the derived performance results. For evaluating the precision of the different characterizations we use the epidemic routing protocol, which has an analytical performance expression that is based on a contact rate λ. We derive from each of the characterizations the corresponding λ values. Then, we compare the results obtained using the analytical expression with simulation results using both synthetic and real contact traces. It is shown that the new characterization methods are very accurate, even for reduced contact traces and high number of nodes., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing Vehicular Density Estimation Using Vehicle-to-Infrastructure Communications

  • Barrachina Villalba, Javier
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Vehicle density is one of the main metrics used for assessing the road traffic conditions. In this paper, we present a solution to estimate the density of vehicles that has been specially designed for Vehicular Networks. Our proposal allows Intelligent Transportation Systems to continuously estimate the vehicular density by accounting for the number of beacons received per Road Side Unit, as well as the roadmap topology. Simulation results indicate that our approach accurately estimates the vehicular density, and therefore automatic traffic controlling systems may use it to predict traffic jams and introduce countermeasures. Index Terms—Vehicular Networks, vehicular density estimation, Road Side Unit, VANETs., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A comparative evaluation of AMQP and MQTT protocols over unstable and mobile networks

  • LUZURIAGA QUICHIMBO, JORGE ELOY
  • Pérez, Miguel
  • Boronat, Pablo
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Message oriented middleware (MOM) refers to the software infrastructure supporting sending and receiving messages between distributed systems. AMQP and MQTT are the two most relevant protocols in this context. They are extensively used for exchanging messages since they provide an abstraction of the different participating system entities, alleviating their coordination and simplifying the communication programming details. These protocols, however, have not been thoroughly tested in the context of mobile or dynamic networks like vehicular networks. In this paper we present an experimental evaluation of both protocols in such scenarios, characterizing their behavior in terms of message loss, latency, jitter and saturation boundary values. Based on the results obtained, we provide criteria of applicability of these protocols, and we assess their performance and viability. This evaluation is of interest for the upcoming applications of MOM, especially to systems related to the Internet of Things., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

On the Selection of Optimal Broadcast Schemes in VANETs

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
In Vehicular ad hoc Networks (VANETs), efficient dissemination of messages is a key factor to speed up the development of useful services and applications. In this paper, we propose a novel algorithm that automatically chooses the best dissemination scheme trying to fit the warning message delivery policy to the current characteristics of each specific vehicular scenario. Our mechanism uses as input parameters the vehicular density and the topological characteristics of the environment where the vehicles are located, in order to decide which dissemination scheme to use. Simulation results demonstrate the feasibility of our approach, which is able to support more efficient warning message dissemination in vehicular environments., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, by the Fundación Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as the Government of Aragón and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessing the Impact of Obstacle Modeling Accuracy on IEEE 802.11p Based Message Dissemination

  • Báguena Albaladejo, Miguel
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Deploying real IEEE 802.11p vehicular network testbeds is a challenging but difficult option for most researchers. In these cases, the research community relies on simulation tools to test their protocols. However, since simulation accuracy is a critical issue, real testbed results should be used as a reference to improve simulation behavior. Our proposal adjusts common propagation models to mimic samples taken from real environments, and it uses a building aware model to achieve as much accuracy as possible in urban scenarios. We evaluate the performance differences obtained with this model against other usual simulation schemes, like line-ofsight propagation models, models where no building blockage is taken into account, and models where propagation is only allowed along streets, achieving differences of up to 70% in some measurements. Going a step further, the model is used to study the radio propagation behavior along different city layouts, showing that the actual building layout is one of the key factors affecting protocol performance in urban environments., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

V2X-d: a Vehicular Density Estimation System that combines V2V and V2I Communications

  • Barrachina Villalba, Javier
  • Sangüesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Road traffic is experiencing a drastic increase, and vehicular traffic congestion is becoming a major problem, especially in metropolitan environments throughout the world. Additionally, in modern Intelligent Transportation Systems (ITS) communications, the high amount of information that can be generated and processed by vehicles will significantly increase message redundancy, channel contention, and message collisions, thus reducing the efficiency of message dissemination processes. In this work, we present a V2X architecture to estimate traffic density on the road that relies on the advantages of combining V2V and V2I communications. Our proposal uses both the number of beacons received per vehicle (V2V) and per RSU (V2I), as well as the roadmap topology features to estimate the vehicle density. By using our approach, modern Intelligent Transportation Systems will be able to reduce traffic congestion and also to adopt more efficient message dissemination protocols., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, by the Fundación Universitaria Antonio Gargallo and the Obra Social de Ibercaja, under Grant 2013/B010, as well as the Government of Aragón and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Power consumption evaluation in vehicular opportunistic networks

  • Herrera-Tapia, Jorge
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
The duration of batteries is a key factor that must be considered in the design and deployment of applications and services on mobile devices. The users of this technology are not aware of the energetic impact of the applications executing in their devices, especially if these applications present an adaptive behavior. The goal of this paper is to study the power consumption associated to an opportunistic communication application. This will be achieved by analyzing the different operation stages of an application running on mobile and vehicular devices, using basic statistical analysis calculations on data collected by a logging application. Furthermore, this will allow analysing the impact of this kind of applications regarding battery performance, providing useful information to users and developers. The experiments were executed in an opportunistic network environment, using a floating content approach as a mechanism for information distribution in a geographically delimited zone., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01 and by the Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación del Ecuador (SENESCY T).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Rumours and Good Practices in Community Networks Wireless Links

  • Perez -Francisco, Miguel
  • Boronat-Perez, Pablo
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
In wireless community networks, backbone pointto-point links concentrate most of the traffic. Thus, these links are crucial for the overall performance of the network. Network managers have to constantly test and maintain these links to optimise their performance, but their decisions are often based upon rumours or a purely theoretical knowledge of the technologies being used. These sources of information can be very biased and can lead to incorrect decisions in such complex systems. In this work we provide the guidelines to help in wireless links optimization by covering the most common mistakes or questions, and by addressing the critical factors one by one using a real scenario. In our experiments we analyse critical characteristics such as the interference among links, the relation between channel bandwidth and throughput, the impact of output power, and the effect of antenna proximity., This work has been supported by project P1·1A2010-13 from the Universitat Jaume I, the project TIN2011-27543-C03-01 from “Ministerio de Ciencia e Innovación de España” and also by the ERDF of the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A reliable token-based MAC protocol for delay sensitive platooning applications

  • Balador, Ali
  • Böhm, Annette
  • Uhlemann, Elisabeth
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
Platooning is both a challenging and rewarding application. Challenging since strict timing and reliability requirements are imposed by the distributed control system required to operate the platoon. Rewarding since considerable fuel reductions are possible. As platooning takes place in a vehicular ad hoc network, the use of IEEE 802.11p is close to mandatory. However, the 802.11p medium access method suffers from packet collisions and random delays. Most ongoing research suggests using TDMA on top of 802.11p as a potential remedy. However, TDMA requires synchronization and is not very flexible if the beacon frequency needs to be updated, the number of platoon member changes or if retransmissions for increased reliability are required. We therefore suggest a token-passing medium access method where the next token holder is selected based on beacon data age. This has the advantage of allowing beacons to be re-broadcasted in each beacon interval whenever time and bandwidth is available. We show that our token-based method is able to reduce the data age and increase reliability considerably compared to pure 802.11p., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543- C03-01. Balador is funded by ERASMUS+ programme, and Böhm and Uhlemann are also funded by the Knowledge Foundation through the ACDC project