Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 62
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Headphone-Based virtual spatialization of sound with a GPU accelerator

  • Belloch Rodríguez, José Antonio
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Vidal Maciá, Antonio Manuel
[EN] Multichannel audio signal processing has undergone major development in recent years. The incorporation of spatial information into an immersive audiovisual virtual environment or into video games provides a better sense of ¿presence¿ to applications. In a binaural system, spatial sound consists of reproducing audio signals with spatial cues (spatial information embedded in the sound) through headphones. This spatial information allows the listener to identify the virtual positions of the sources corresponding to different sounds. Headphone-based spatial sound is obtained by filtering different sound sources through a collection of special filters (whose frequency responses are called Head-Related Transfer Functions) prior to rendering them through headphones. These filters belong to a database composed by a limited number of spatial fixed positions. A complete audio application that can render multiple sound sources in any position of the space and virtualize movements of sound sources in real time demands high computing needs. Graphics Processing Units (GPUs) are highly parallel programmable coprocessors that provide massive computation when the needed operations are properly parallelized. This paper presents the design of a headphone-based multisource spatial audio application whose main feature is that all required processing is carried out on the GPU. To this end, two solutions have been approached in order to synthesize sound sources in spatial positions that are not included in the database and to virtualize sound sources movements between different spatial positions. The results show that the proposed application is able to move up to 240 sources simultaneously ., This work has been partially funded by Spanish Ministerio de Economia (TEC2009-13741 and TEC2012-38142-C04-01) and EU through FEDER funds, Generalitat Valenciana PROMETEO 2009/2013, and Universitat Politecnica de Valencia through Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-11 and PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new well-balanced non-oscillatory central scheme for the shallow water equations on rectangular meshes

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Balaguer-Beser, Ángel|||0000-0003-0039-2641
This paper is concerned with the development of high-order well-balanced central schemes to solve the shallow water equations in two spatial dimensions. A Runge Kutta scheme is applied for time discretization. A Gaussian quadrature rule is used to evaluate time integrals and a three-degree polynomial which calculates point-values or flux values. A new procedure has been defined to evaluate the flux integrals and to approach the 2D source term integrals in order to verify the exact C-property, using the water surface elevation instead of the water depth as a variable. Numerical experiments have confirmed the high-resolution properties of our numerical scheme in 2D test problems., This work was partially funded by the "Programa de Apoyo a la Investigacion y Desarrollo" (PAID-06-10) and (PAID-05-12) of the Universidad Politecnica de Valencia. Angel Balaguer-Beser thanks the support of the Spanish Ministry of Education and Science in the framework of the Projects CGL2009-14220-C02-01 and CGL2010-19591. The authors express their gratitude to the anonymous reviewers for their helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stochastic Cooperative Decision Approach for Studying the Symmetric Behavior of People in Wireless Indoor Location Systems

  • Tomás Gironés, Jesús|||0000-0002-0358-0325
  • Canovas Solbes, Alejandro|||0000-0002-0422-0161
  • Lloret, Jaime|||0000-0002-0862-0533
  • García Pineda, Miguel
[EN] Nowadays, several wireless location systems have been developed in the research world. The goal of these systems has always been to find the greatest accuracy as possible. However, if every node takes data from the environment, we can gather a lot of information, which may help us understand what is happening around our network in a cooperative way. In order to develop this cooperative location and tracking system, we have implemented a sensor network to capture data from user devices. From this captured data we have observed a symmetry behavior in people's movements at a specific site. By using these data and the symmetry feature, we have developed a statistical cooperative approach to predict the new user's location. The system has been tested in a real environment, evaluating the next location predicted by the system and comparing it with the next location in the real track, thus getting satisfactory results. Better results have been obtained when the stochastic cooperative approach uses the transition matrix with symmetry., This work is supported by the "Universitat Politecnica de Valencia" through "PAID-05-12".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of single-mode waveguides for enhanced light-sound interaction in honeycomb-lattice silicon slabs

  • Escalante Fernández, José María
  • Laude, Vincent
  • Martínez, Alejandro|||0000-0001-5448-0140
We present the design of two waveguides (ladder and slot-ladder waveguides) implemented in a silicon honeycomb photonic-phononic crystal slab, which can support slow electromagnetic and elastic guided modes simultaneously. Interestingly, the photonic bandgap extends along the first Brillouin zone; so with an appropriate design, we can suppress propagation losses that arise coupling to radiative modes. From the phononic point of view, we explain the slow elastic wave effect by considering the waveguide as a chain of coupled acoustic resonators (coupled resonant acoustic waveguide), which provides the mechanism for slow elastic wave propagation. The ladder waveguide moreover supports guided phononic modes outside the phononic bandgap, similar to photonic slab modes, resulting in highly confined phononic modes propagating with low losses. Such waveguides could find important applications to the observation of optomechanical and electrostriction effects, as well as to enhanced stimulated Brillouin scattering and other opto-acoustical effects in nanoscale silicon structures. We also suggest that they can be the basis for a "perfect" photonic-phononic cavity in which damping by coupling to the surroundings is completely forbidden., Financial support from the multidisciplinary project of UPV, PAID-05-12 (CE 20130141).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

La innovación organizacional en el sector turístico: nuevas demandas del entorno, Innovation in tourism: new environmental demands

  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] In these times of economic and financial instability, innovation will lead us to be competitive. All companies use to be innovating, even without knowledge about it. So, the challenge is to find a way to deal with innovation and not lose it in the company¿s administrative and organizational processes. Referred on the tourism sector where innovation is possible, in this paper we present a model based in different experiences developed in touristic companies. We propose ten variables or behavior patterns applied to organizational structure and ideas management system, which will guide companies to be innovative., [ES] En estos momentos de gran inestabilidad económica y financiera, innovar es el reto que nos guiará a ser competitivos. Todas las empresas innovan, aún sin saber que lo están haciendo, así que el reto radica en saber canalizar dicha innovación de forma que no se pierda en la maraña administrativa y organizativa de la empresa. De este modo, basándonos en el sector turístico donde hay más que margen para la innovación, en el presente trabajo se presenta un modelo extraído de diferentes experiencias realizadas en empresas del sector. Se proponen diez variables, o patrones de conducta,aplicadas a la estructura organizativa y el sistema de gestión de ideas de la empresa, lo cual contribuirá a convertir las empresas en innovadoras., Trabajo parcialmente financiado por los proyectos: CORSARI MAGIC DPI2010-18243; TIN2008-06872-C04-02/TIN; MINECO (DER2012-37844); MICNIN (DER2009-14519-C05-01/JURI); PAID-05-12-SP20120480 y PIME/2012/A/016/A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transcranial propagation with an ultrasonic mono-element focused transducer

  • Iglesias, Pablo C.
  • Konofagou, E.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Focused Ultrasound is the only truly transient, local and non-invasive technique able to induce safe Blood-Brain Barrier Opening (BBBO), technique used in Parkinson or Alzheimer diseases research. However, the presence of the skull in the path usually affects the focus characteristics (gain, beam width, shape and maxima location). In this work, transcranial acoustic wave propagation generated by a mono-element focused transducer has been modeled using 2D and 3D FDTD methods. Skull structure of the non-human primate under test can be compared in terms of density and sound speed with polymethylmethacrylate (PMMA) films. Then, focus aberration and the phenomena that cause it are characterized, providing a better control of the beam focus using the BBBO technique. Results throw that focal axial displacements are constant with the angle of incidence for PMMA flat films. In normal incidence, a shift of 6 mm is given for axial displacement in the 2D transcranial propagation. Moreover, if the skull geometry under the action of the ultrasonic beam can be compared with the curvature radius of the transducer, displacements should be constant with angle independency, like those seeing in the homogenous flat films with the same thickness., This work was supported by: “Programa de Apoyo a la Investigación y Desarrollo de la Universidad Politécnica de Valencia” PAID-05-12 Ref: SP20120696, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cache-Hierarchy contention-aware scheduling in CMPs

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Duato Marín, José Francisco
To improve chip multiprocessor (CMP) performance, recent research has focused on scheduling strategies to mitigate main memory bandwidth contention. Nowadays, commercial CMPs implement multilevel cache hierarchies that are shared by several multithreaded cores. In this microprocessor design, contention points may appear along the whole memory hierarchy. Moreover, this problem is expected to aggravate in future technologies, since the number of cores and hardware threads, and consequently the size of the shared caches increase with each microprocessor generation. This paper characterizes the impact on performance of the different contention points that appear along the memory subsystem. The analysis shows that some benchmarks are more sensitive to contention in higher levels of the memory hierarchy (e.g., shared L2) than to main memory contention. In this paper, we propose two generic scheduling strategies for CMPs. The first strategy takes into account the available bandwidth at each level of the cache hierarchy. The strategy selects the processes to be coscheduled and allocates them to cores to minimize contention effects. The second strategy also considers the performance degradation each process suffers due to contention-aware scheduling. Both proposals have been implemented and evaluated in a commercial single-threaded quad-core processor with a relatively small two-level cache hierarchy. The proposals reach, on average, a performance improvement by 5.38 and 6.64 percent when compared with the Linux scheduler, while this improvement is by 3.61 percent for an state-of-the-art memory contention-aware scheduler under the evaluated mixes., This work was supported by the Spanish MINECO under Grant TIN2012-38341-C04-01, and by the Universitat Politecnica de Valencia under Grant PAID-05-12 SP20120748.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Characterizing the driving style behavior using artificial intelligence techniques

  • Meseguer Anastasio, Javier Enrique
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The On Board Diagnosis (OBD-II) standard allows accessing the vehicles’ Electronic Control Unit (ECU) easily through a Bluetooth OBD-II connector. This paper presents the DrivingStyles architecture, which adopts data mining techniques and neural networks to analyze and generate a classification of driving styles by analysing the characteristics of the driver along the route followed. The final goal is to assist drivers at correcting the bad habits in their driving behavior, while offering helpful tips to improve fuel economy. Since it is well known that smart driving can lead to a lower fuel consumption, the environmental impact is also reduced. A study involving more than 180 users is being carried out, where their real time traces (with different traffic conditions) is sent periodically to the platform. DrivingStyles is currently available on the Google Play Store platform for free download, and has achieved more than 2800 downloads from different countries in just a few months, This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01, and by the Universitat Politècnica de València through the ABATIS project (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polarization Division Multiplexing of OFDM Radio-over-Fiber Signals in Passive Optical Networks

  • Maria Morant|||0000-0001-5565-7788
  • Roberto Llorente|||0000-0003-4799-2564
  • Pérez Soler, Joaquín
[EN] This paper describes the state-of-the-art of polarization multiplexing for optical networks transmission. The use of polarization division multiplexing (PDM) permits to multiply the user capacity and increase the spectral efficiency. Combining PDM and orthogonal frequency division multiplexed (OFDM) modulation allows maximizing the optical transmission capacity. The experimental demonstration of transmitting OFDM signals following ECMA-368 ultrawide band (UWB) standard in radio-over-fiber using PDM in passive optical networks is herein reported. The impact of cross-polarization and cochannel crosstalk is evaluated experimentally in a three-user OFDM-UWB subcarrier multiplexed (SCM) configuration per polarization. Each SCM uses up to three OFDM-UWB channels of 200 Mbit/s each, achieving an aggregated bitrate of 1.2 Gbit/s with 0.76 bit/s/Hz spectral efficiency when using PDM transmission. The experimental results for the polarization-multiplexed SCM indicate that a 4 dB additional polarization crosstalk interference can be expected compared to a nonpolarization-multiplexed transmission system which translates to 2.4 dB EVM penalty in the UWB signals. The successful PDM transmission of SCM multiuser OFDM-UWB over a passive optical network of 25 km standard-single mode fiber (SSMF) reach is demonstrated., This work has been supported by Spain National Plan Project MODAL “Few-mode propagation technology in single mode fibre” (TEC2012-38558-C02-01). UPV Project MUMOX “Optical modal multiplexing for high-performance network interconnection” (PAID-05-12 SP20120821) is also acknowledged. M. Morant’s work is supported by Generalitat Valenciana VALi+D Postdoc Program. J. Perez’s work is supported by Spanish MINECO Juan de la Cierva Fellowship JCI-2012-14805.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A note on local bases and convergence in fuzzy metric spaces

  • Gregori Gregori, Valentín|||0000-0002-5983-6182
  • Miñana, Juan-José|||0000-0001-9835-0700
  • Morillas, Samuel|||0000-0001-9262-6139
In the context of fuzzy metrics in the sense of George and Veeramani, we study when certain families of open balls centered at a point are local bases at this point. This question is related to p-convergence and s-convergence. © 2013 Elsevier B.V. All rights reserved., Samuel Morillas acknowledges the support of Universitat Politenica de Valencia under Grant PAID-05-12 SP20120696.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using microwave near-field reflection measurements as a non-destructive test to determine water penetration depth of concrete

  • Castro, Andrés F.
  • Vidal, B.
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
A non-destructive version of a standard test for concrete permeability has been demonstrated. The method is based on water penetration depth estimation from near-field microwave measurements using an open-ended rectangular waveguide. In particular, water penetration is determined from the differential measurement of reflection coefficient in the S-band before and after injection of water under pressure. Experimental results show a good correlation between the standard destructive test and the new method. Microwave measurements simplify the standard test avoiding the need of drilling out a sample from the structure and thus reducing both the cost and time needed in the analysis. & 2015 Elsevier Ltd. All rights reserved., Andres F. Castro would like to acknowledge the financial support (FI-015-13 and F1-015A-13) received from the MICITT (Ministerio de Ciencia, Tecnologia y Telecomunicaciones) and CONICIT (Consejo Nacional para Investigaciones Cientificas y Tecnologicas), both entities of the Costa Rican government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Verification of the Parallel Pin-Wise Core Simulator pCTF/PARCSv3.2 in Operational Control Rod Drop Transient Scenarios

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
  • Bermejo, Juan A.
  • Ortego, Alberto
  • Posada-Barral, Jose Maria
[EN] Thanks to advances in computer technology, it is feasible to obtain detailed reactor core descriptions for safety analysis of the light water reactor (LWR), in order to represent realistically the fuel elements design, as is the case for three-dimensional coupled simulations for local neutron kinetics and thermal hydraulics. This scenario requires an efficient thermal-hydraulic code that can produce a response in a reasonable time for large-scale, detailed models. In two-fluid codes, such as the thermal-hydraulic subchannel code COBRA-TF, the time restriction is even more important, since the set of equations to be solved is more complex. We have developed a message passing interface parallel version of COBRA-TF, called pCTF. The parallel code is based on a cell-oriented domain decomposition approach, and performs well in models that consist of many cells. The Jacobian matrix is computed in parallel, with each processor in charge of calculating the coefficients related to a subset of the cells. Furthermore, the resulting system of linear equations is also solved in parallel, by exploiting solvers and preconditioners from PETSc. The goal of this study is to demonstrate the capability of the recently developed pCTF/PARCS coupled code to simulate large cores with a pin-by-pin level of detail in an acceptable computational time, using for this purpose two control rod drop operational transients that took place in the core of a three-loop pressurized water reactor. As a result, the main safety parameters of the core hot channel have been calculated by the coupled code in a pin level of detail, obtaining best estimate results for this transient., This work has been partially supported by the Universitat Politecnica de Valencia under Projects COBRA_PAR (PAID-05-11-2810) and OpenNUC (PAID-05-12), and by the Spanish Ministerio de Economia y Competitividad under Projects SLEPc-HS (TIN2016-75985-P) and NUC-MULTPHYS (ENE2012-34585).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the performance of multi-GPU-based expert systems for acoustic localization involving massive microphone array

  • Belloch Rodríguez, José Antonio
  • Cobos Serrano, Máximo
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Vidal Maciá, Antonio Manuel
Sound source localization is an important topic in expert systems involving microphone arrays, such as automatic camera steering systems, human-machine interaction, video gaming or audio surveillance. The Steered Response Power with Phase Transform (SRP-PHAT) algorithm is a well-known approach for sound source localization due to its robust performance in noisy and reverberant environments. This algorithm analyzes the sound power captured by an acoustic beamformer on a defined spatial grid, estimating the source location as the point that maximizes the output power. Since localization accuracy can be improved by using high-resolution spatial grids and a high number of microphones, accurate acoustic localization systems require high computational power. Graphics Processing Units (GPUs) are highly parallel programmable co-processors that provide massive computation when the needed operations are properly parallelized. Emerging GPUs offer multiple parallelism levels; however, properly managing their computational resources becomes a very challenging task. In fact, management issues become even more difficult when multiple GPUs are involved, adding one more level of parallelism. In this paper, the performance of an acoustic source localization system using distributed microphones is analyzed over a massive multichannel processing framework in a multi-GPU system. The paper evaluates and points out the influence that the number of microphones and the available computational resources have in the overall system performance. Several acoustic environments are considered to show the impact that noise and reverberation have in the localization accuracy and how the use of massive microphone systems combined with parallelized GPU algorithms can help to mitigate substantially adverse acoustic effects. In this context, the proposed implementation is able to work in real time with high-resolution spatial grids and using up to 48 microphones. These results confirm the advantages of suitable GPU architectures in the development of real-time massive acoustic signal processing systems., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad (TEC2009-13741, TEC2012-38142-C04-01, and TEC2012-37945-C02-02), Generalitat Valenciana PROMETEO 2009/2013, and Universitat Politecnica de Valencia through Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-11 and PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Design and development of driving simulator scenarios for road validation studies

  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
  • Molina Pardo, Jaime
[EN] In recent years, the number of road-based studies using driving simulators is growing significantly. This allows evaluating controlled situations that otherwise would require disproportionate observations in time and/or cost. The Institute of Design and Manufacturing (IDF) of the Polytechnic University of Valencia (UPV) has developed, in collaboration with the Engineering Research Group Highway (GIIC) of the UPV, a low cost simulator that allows rapid implementation and effectively a new methodology for validation studies of different roads through the implementation in the simulator scenarios of existing roads. This methodology allows the development of new scenarios based on the analysis of a layers-file system. Each layer includes different information from the road, such as mapping, geometry, signaling, aerial photos, etc. The creation of the simulated scenario is very fast based on the geometric design software, making it easier to consulting firms using the system that can evaluate and audit a particular route, obtaining reliable conclusions at minimal cost, even if the road is not actually built. This paper describes the basic structure of the layers generated for developing scenarios and guidelines for the implementation thereof. Finally the application of this methodology to a case of success will be described., Authors would like to thank Polytechnic University of Valencia (UPV) that subsidizes the research project CONSIM (PAID 05-2012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of background push content download services to mobile devices over DVB networks

  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
This paper proposes a multicast content download service based on the use of residual network capacity to push multimedia content to available local storage in personal multimedia devices. The service under study is based on the FLUTE protocol. Specifically, FLUTE packets fill the spare capacity in the IP tunnels reserved for the primary streaming service (opportunistic insertion). The paper also evaluates the use of AL-FEC parity to overcome transmission errors,object multiplexing to send the most popular multimedia contents more frequently and cache management policies that consider user preferences in order to keep in storage the most useful items. The service has been evaluated through simulations and measurements performed with an application prototype based on the DVB-H standards. The results show that AL-FEC enables the use of residual capacity for background content download services. In turn, AL-FEC, as well as object multiplexing, improves the relation between the number of content items and the overall access time. Moreover, results show that high percentages of requests can be served from the local cache of the service, provided that it is possible to estimate the popularity of content items and the user preferences., This work was supported by the PAID-05-12 program of the UniversitatPolitecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed Database Management Techniques for Wireless Sensor Networks

  • Diallo, Ousmane
  • Rodrigues, Joel J. P. C.
  • Sene, Mbaye
  • Lloret, Jaime|||0000-0002-0862-0533
In sensor networks, the large amount of data generated by sensors greatly influences the lifetime of the network. In order to manage this amount of sensed data in an energy-efficient way, new methods of storage and data query are needed. In this way, the distributed database approach for sensor networks is proved as one of the most energy-efficient data storage and query techniques. This paper surveys the state of the art of the techniques used to manage data and queries in wireless sensor networks based on the distributed paradigm. A classification of these techniques is also proposed. The goal of this work is not only to present how data and query management techniques have advanced nowadays, but also show their benefits and drawbacks, and to identify open issues providing guidelines for further contributions in this type of distributed architectures., This work was partially supported by the Instituto de Telcomunicacoes, Next Generation Networks and Applications Group (NetGNA), Portugal, by the Ministerio de Ciencia e Innovacion, through the Plan Nacional de I+D+i 2008-2011 in the Subprograma de Proyectos de Investigacion Fundamental, project TEC2011-27516, by the Polytechnic University of Valencia, though the PAID-05-12 multidisciplinary projects, by Government of Russian Federation, Grant 074-U01, and by National Funding from the FCT-Fundacao para a Ciencia e a Tecnologia through the Pest-OE/EEI/LA0008/2013 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Breaking the Vehicular Wireless Communications Barriers: Vertical Handover Techniques for Heterogeneous Networks

  • Marquez-Barja, Johann M.
  • Ahmadi, Hamed
  • Tornell, Sergio M
  • DaSilva, Luiz A
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
End users increasingly expect ubiquitous connectivity while on the move. With a variety of wireless access technologies available, we expect to always be connected to the technology that best matches our performance goals and price points. Meanwhile, sophisticated onboard units (OBUs) enable geolocation and complex computation in support of handover. In this paper, we present an overview of vertical handover techniques and propose an algorithm empowered by the IEEE 802.21 standard, which considers the particularities of the vehicular networks (VNs), the surrounding context, the application requirements, the user preferences, and the different available wireless networks [i.e., Wireless Fidelity (Wi-Fi), Worldwide Interoperability for Microwave Access (WiMAX), and Universal Mobile Telecommunications System (UMTS)] to improve users' quality of experience (QoE). Our results demonstrate that our approach, under the considered scenario, is able to meet application requirements while ensuring user preferences are also met., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant TIN2011-27543-C03-01 and Grant BES-2012-052673, by Universitat Politecnica de Valencia through the ABATIS Project (PAID-05-12), and by the Science Foundation Ireland under Grant 10/IN.1/I3007 and Grant 10/CE/I1853. The review of this paper was coordinated by Dr. Y. Ji.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A review of tactical optimization models for integrated production and transport routing planning decisions

  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Peidro Payá, David|||0000-0001-8678-6881
  • Mula, Josefa|||0000-0002-8447-3387
[EN] This paper presents a review of tactical optimization models for integrated production and transport routing planning decisions. The objective of this research is to identify current trends and future research directions in this field, and to propose a classification framework based on the following elements: production, inventory and routing aspects, modelling aspects of the objective function structure and solution approach. All these criteria are expected to be relevant for readers, and will provide researchers and practitioners a starting point for optimization models in the production and routing area at the tactical level. (C) 2015 Elsevier Ltd. All rights reserved., This paper has been funded by the Spanish Ministry Project entitled Design and Management of Global Supply Chains (GLOBOP) (Ref. DPI2012-38061-C02-01) and the Universitat Politécnica de Valéncia Projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

L1-Bandwidth Aware Thread Allocation in Multicore SMT Processors

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Duato Marín, José Francisco
Improving the utilization of shared resources is a key issue to increase performance in SMT processors. Recent work has focused on resource sharing policies to enhance the processor performance, but their proposals mainly concentrate on novel hardware mechanisms that adapt to the dynamic resource requirements of the running threads. This work addresses the L1 cache bandwidth problem in SMT processors experimentally on real hardware. Unlike previous work, this paper concentrates on thread allocation, by selecting the proper pair of co-runners to be launched to the same core. The relation between L1 bandwidth requirements of each benchmark and its performance (IPC) is analyzed. We found that for individual benchmarks, performance is strongly connected to L1 bandwidth consumption, and this observation remains valid when several co-runners are launched to the same SMT core. Based on these findings we propose two L1 bandwidth aware thread to core (t2c) allocation policies, namely Static and Dynamic t2c allocation, respectively. The aim of these policies is to properly balance L1 bandwidth requirements of the running threads among the processor cores. Experiments on a Xeon E5645 processor show that the proposed policies significantly improve the performance of the Linux OS kernel regardless the number of cores considered., This work was supported by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO) and by FEDER funds under Grant TIN2012-38341-C04-01; and by Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-12) of the ´ Universitat Politecnica de Val ` encia under Grant SP20120748
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy goal programming for material requirements planning under uncertainty and integrity conditions

  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Mula, Josefa|||0000-0002-8447-3387
  • Jiménez, Mariano
In this paper, we formulate the material requirements planning) problem of a first-tier supplier in an automobile supply chain through a fuzzy multi-objective decision model, which considers three conflictive objectives to optimise: minimisation of normal, overtime and subcontracted production costs of finished goods plus the inventory costs of finished goods, raw materials and components; minimisation of idle time; minimisation of backorder quantities. Lack of knowledge or epistemic uncertainty is considered in the demand, available and required capacity data. Integrity conditions for the main decision variables of the problem are also considered. For the solution methodology, we use a fuzzy goal programming approach where the importance of the relations among the goals is considered fuzzy instead of using a crisp definition of goal weights. For illustration purposes, an example based on modifications of real-world industrial problems is used., This work has been funded by the Universitat Politecnica de Valencia Project: 'Material Requirements Planning Fourth Generation (MRPIV)' (Ref. PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The importance of T ... T ... T angles in the feasibility of zeolites

  • Liu, Xuehua
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Argente, Estefanía|||0000-0002-5431-3868
  • Botti V.|||0000-0002-6507-2756
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
The database of prospective zeolites (www. hypotheticalzeolites.net) has been screened in search of feasible zeolites. Previous criteria of zeolite feasibil- ity have been reviewed, based on descriptors such as energy, density, average and distribution of ring sizes, and more importantly that of Li et al. (LID criteria) presented recently [Angew. Chem. Int. Ed. 2013, 52, 1673], based on Si O, O ... O, and Si ... Si distances of SLC-minimised struc- tures. In spite of the still large number of feasible zeolites according to this and other criteria, a number of research- ers wonder why there are so many feasible and so few synthesised zeolites. Without answering this difficult question, a new criteria is proposed in this study based on the fact that T ... T ... T angles (T is tetrahedral atom) show spe- cific ranges of values depending on the ring size to which they belong. Based on improved definitions to count and enumerate rings in zeolites, and with data from the IZA database, we introduce the TTT criteria, which we propose to use after the LID criteria, to further narrow the space of feasible zeolites., We thank ASIC computational centre of UPV for making available their computational resources. UPV is acknolwdeged by funding through project PAID-05-12. G. S. thanks the Spanish government for the provision of Severo Ochoa project (SEV 2012-0267) and MAT2012-31657 project. Professors Mike Treacy and Christian Baerlocher are gratefully acknowledged for useful discussions. Laurent Baumes is thanked by initial training with the database.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aproximación paralela del código termohidráulico de subcanal COBRA-TF

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
La paralelización permite el uso de numerosos procesadores (o núcleos) que colaboren en la obtención de la solución a un único problema. Esto no sólo reduce el tiempo de computación, sino que además aumenta la cantidad de memoria disponible en un clúster. Por tanto pueden resolverse problemas de gran dimensión. Con objeto de validar la paralelización de COBRA-TF se ha modelado a nivel de subcanal un elemento combustible tipo PWR y se ha simulado un pequeño estacionario, obteniéndose una considerable aceleración en la simulación en paralelo comparado con el caso secuencial., Este trabajo ha sido parcialmente esponsorizado por la Universitat Politècnica de València bajo los proyectos COBRA_PAR PAID-05-11-2810 y OpenNUC PAID-05-12.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improvement of a distribution network of a direct sale cosmetics supply chain

  • Diez, M.
  • Campuzano Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
Consistent studies assessing the impact of the strategic decision of distribution nodes with no-financial key performance indicators are lacking. This work focuses on studying how the distribution system of a direct sale cosmetics supply chain behaves and on generating decision-making scenarios relating to the definition and size of distribution nodes. A systems dynamics-based simulation tool deals with a strategic decision and size of distribution nodes in a reduced direct sale supply chain of cosmetic products. The methodological approach presented herein allows to analyse how existing facilities operate and to verify their performance. Finally, this work provides a reference conceptual model for the strategic definition of distribution nodes., This work has been funded by the UPV project entitled 'Material Requirement Planning Fourth Generation (MRPIV)' (Ref. PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the area and distance between electrodes on resistivity measurements of concrete

  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
  • Ramón Zamora, José Enrique
  • Bataller Prats, Román
  • Palací-López, Daniel Gonzalo
  • Soto Camino, Juan
Differences between the cell cross section and the electrodes area produce a heterogeneous distribution of the electric field that causes a non-linear relationship between electric resistance and distance for low values of electrode separation. Therefore, in actual structures, it is usually not correct to measure the resistivity of concrete by using the direct method because the electrodes area is smaller than the cross section of the concrete piece. In this experimental research the influence of the area and the distance between electrodes on the resistivity measurement is analyzed and a semi-empirical model is explained, in which the values of the electrical resistance with respect to distance are adjusted. Based on this model, two new non-destructive methods are proposed in order to measure the electrical resistivity of concrete when using electrodes with a smaller area than the cross section of the piece: one includes varying the distance between electrodes and the other uses electrodes with a different area, but maintains a fixed distance between them., Financial support from the Spanish Government (projects MAT2012-38429-C04-04 and IPT-2012-0069-310000) and from the Universitat Politecnica de Valencia (PAID-05-12) is gratefully acknowledged. The pre-doctoral scholarship granted to Roman Bataller Prats within the program "Formacion de Personal Investigador (FPI) 2012'' from the Universitat Politecnica de Valencia and to Jose Enrique Ramon within the program "Formacion de Profesorado Universitario'' from the Ministry of Education, Culture and Sport (FPU 13/00911) are also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A personalized system for scalable distribution of multimedia content in multicast wireless networks

  • De Fez Lava, Ismael
  • Gil Pascual, Miriam
  • Fons Cors, Josep|||0000-0002-3718-3096
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
This paper presents a novel architecture for scalable multimedia content delivery over wireless networks. The architecture takes into account both the user preferences and context in order to provide personalized contents to each user. In this way, third-party applications filter the most appropriate contents for each client in each situation. One of the key characteristics of the proposal is the scalability, which is provided, apart from the use of filtering techniques, through the transmission in multicast networks. In this sense, content delivery is carried out by means of the FLUTE (File Delivery over Unidirectional Transport) protocol, which provides reliability in unidirectional environments through different mechanisms such as AL-FEC (Application Layer Forward Error Correction) codes, used in this paper. Another key characteristic is the context-awareness and personalization of content delivery, which is provided by means of context information, user profiles, and adaptation. The system proposed is validated through several empirical studies. Specifically, the paper presents evaluations of two types that collect objective and subjective measures. The first evaluate the efficiency of the transmission protocol, analyzing how the use of appropriate transmission parameters reduces the download time (and thus increasing the Quality of Experience), which can be minimized by using caching techniques. On the other hand, the subjective measures present a study about the user experience after testing the application and analyze the accuracy of the filtering process/strategy. Results show that using AL-FEC mechanisms produces download times until four times lower than when no protection is used. Also, results prove that there is a code rate that minimizes the download time depending on the losses and that, in general, code rates 0.7 and 0.9 provide good download times for a wide range of losses. On the other hand, subjective measures indicate a high user satisfaction (more than 80 %) and a relevant degree of accuracy of the content adaption., This work is supported in part by the Ministerio de Economia y Competitividad of the Government of Spain under project COMINN (IPT-2012-0883-430000) and by the project PAID/2012/313 from the PAID-05-12 program of the Vicerrectorado de Investigacion of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mejoras en la versión paralela del código termohidráulico de subcanal COBRA-TF

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
[ES] Realizar análisis en seguridad nuclear a nivel de varilla de combustible requiere las ejecución de códigos acoplados neutrónicotermohidráulicos que permitan la simulación de grandes dominios físicos en un tiempo razonable. Para ello resulta imprescindible el uso de numerosos procesadores (o núcleos) que colaboren en la obtención de la solución a un único problema utilizando la potencia computacional y de memoria disponible en un clúster. En anteriores trabajos se presentó la paralelización del código termohidráulico de subcanal COBRA-TF (CTF) mediante la tecnología MPI (Message Passing Interface) y utilizando la librería paralela de métodos numéricos PETSc para resolver el sistema lineal de ecuaciones del código. En el presente documento se expondrán las mejoras introducidas en código acoplado, centradas tanto en la parte de optimización de memoria como en paralelismo, además se ha combinado la tecnología MPI y la PVM (Parallel Virtual Machine) para posibilitar el uso del código acoplado CTF/PARCSV2.7., Este trabajo ha sido parcialmente esponsorizado por la Universitat Politècnica de València bajo los proyectos COBRA_PAR PAID-05-11-2810 y OpenNUC PAID-05-12 y por el Ministerio de Economía y Competitividad a través del proyecto NUC-MULTPHYS ENE-2012-34585 financiado por los fondos FEDER de la Unión Europea.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive step ODE algorithms for the 3D simulation of electric heart activity with graphics processing units

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Millet Roig, José|||0000-0002-8879-003X
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Liberos Mascarell, Alejandro
  • Climent, Andreu M.
In this paper we studied the implementation and performance of adaptive step methods for large systems of ordinary differential equations systems in graphics processing units, focusing on the simulation of three-dimensional electric cardiac activity. The Rush-Larsen method was applied in all the implemented solvers to improve efficiency. We compared the adaptive methods with the fixed step methods, and we found that the fixed step methods can be faster while the adaptive step methods are better in terms of accuracy and robustness. (c) 2013 Elsevier Ltd. All rights reserved., This work has been partially funded by Universitat Politecnica de Valencia through Programa de Apoyo a la InvestigaciOn y Desarrollo (PAID-06-11) and (PAID-05-12), by Generalitat Valenciana through projects PROMETEO/2009/013 and Ayudas para la realizacion de proyectos de I+D para grupos de investigacion emergentes GV/2012/039, and by Ministerio Espafiol de Economia y Competitividad through project TEC2012-38142-004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fuzzy optimization approach for procurement transport operational planning in an automobile supply chain

  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Peidro Payá, David|||0000-0001-8678-6881
  • Mula, Josefa|||0000-0002-8447-3387
We consider a real-world automobile supply chain in which a first-tier supplier serves an assembler and determines its procurement transport planning for a second-tier supplier by using the automobile assembler's demand information, the available capacity of trucks and inventory levels. The proposed fuzzy multi-objective integer linear programming model (FMOILP) improves the transport planning process for material procurement at the first-tier supplier level, which is subject to product groups composed of items that must be ordered together, order lot sizes, fuzzy aspiration levels for inventory and used trucks and uncertain truck maximum available capacities and minimum percentages of demand in stock. Regarding the defuzzification process, we apply two existing methods based on the weighted average method to convert the FMOILP into a crisp MOILP to then apply two different aggregation functions, which we compare, to transform this crisp MOILP into a single objective MILP model. A sensitivity analysis is included to show the impact of the objectives weight vector on the final solutions. The model, based on the full truck load material pick method, provides the quantity of products and number of containers to be loaded per truck and period. An industrial automobile supply chain case study demonstrates the feasibility of applying the proposed model and the solution methodology to a realistic procurement transport planning problem. The results provide lower stock levels and higher occupation of the trucks used to fulfill both demand and minimum inventory requirements than those obtained by the manual spreadsheet-based method. (C) 2014 Elsevier Inc. All rights reserved., This work has been funded partly by the Spanish Ministry of Science and Technology project: Production technology based on the feedback from production, transport and unload planning and the redesign of warehouses decisions in the supply chain (Ref. DPI2010-19977) and by the Universitat Politecnica de Valencia project 'Material Requirement Planning Fourth Generation (MRPIV) (Ref. PAID-05-12)'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gold, Carbon and Aluminum Low-reflectivity Compact Discs as Microassaying Platforms

  • Brun, Eva M.|||0000-0003-0118-6911
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
Compact disc (CD) surface modification with different reflective materials offers new working perspectives as bioanalytical platforms. The potential of gold, carbon, and aluminum low-reflectivity compact discs as a substrate for microassaying is presented. CD polycarbonate bases were coated with these reflecting materials, maintaining optical properties. Probes immobilization onto reflective layers was studied by both passive adsorption and covalent linking. Different chemical modifications were made on substrates to provide functional groups capable of anchoring probes with primary amines covalently. Thus, self-assembled monolayers were performed by chemisorption of 11-mercaptoundecanoic acid on gold surfaces, and silanization with N- (trimethoxysilylpropyl)ethylenediamine triacetic acid on aluminum to provide a carboxylic acid functional group. Carbon oxidation with oxygen plasma afforded similar functionalization on the discs coated with this material. Performance of the studied materials as reflective layers was evaluated, and as proof of concept, a microimmunoassay for a neurotoxic compound was studied on the three surfaces. The results show the possibility of doing assays on this new supports with good analytical performances while maintaining discs¿ optical and mechanical properties to be read by a CD player., The authors are thankful to Javier Carrascosa for his valuable aid in CD reading, to Juan Soto for obtaining cyclic voltammograms, and to the Servicio de Microscopia electronica (Universitat Politecnica de Valencia) for their kind assistance in sputtering depositions and AFM. This work has been supported by Projects FEDER MICINN CTQ2010-15943, GVA PROM-ETEO 2010/008 and ACOMP/2012/158, and the program PAID-05-12 (Universitat Politecnica de Valencia).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

std-Convergence in fuzzy metric spaces

  • Gregori Gregori, Valentín|||0000-0002-5983-6182
  • Miñana, Juan José
In this note we answer two recent questions posed by Morillas and Sapena [10] related to standard convergence in fuzzy metric spaces in the sense of George and Veeramani. The obtained results lead us to establish what conditions must satisfy a concept about sequential convergence to be considered compatible with a concept of Cauchyness., Juan Jose Minana acknowledges the support of Conselleria de Educacion, Formacion y Empleo (Programa Vali+d para investigadores en formacion) of Generalitat Valenciana, Spain, ACIF/2012/040, and the support of Universitat Politecnica de Valencia under Grant PAID-06-12 SP20120471.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Tool Offering Steady-State Simulations for VANETs

  • Báguena Albaladejo, Miguel
  • Martínez Tornell, Sergio
  • Torres Cortés, Álvaro
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Without realistic vehicle mobility patterns, the evaluation of communication protocols in vehicular networks is compromised. Moreover, in order to ensure repeatability and fairness in vehicular simulations, researchers require simulation tools that allow them to have a complete control of simulations. In this paper we present VACaMobil, a Mobility Manager for the OMNeT++ simulator which offers a way to create complex scenarios with realistic vehicular mobility by allowing to define the desired average number of vehicles, along with its upper and lower bounds, which are maintained throughout the simulation. We compare VACaMobil against other commonly used methods which also generate and manage vehicular mobility. Results expose some flaws of those basic tools, and shows that VACaMobil behaves significantly better. The harmful impact on communication protocols when using common tools is also quantified, revealing VACaMobil as a necessity for current research., This work was partially supported by the Ministerio de Economía y Competitividad, Spain, under Grants TIN2011-27543- C03-01 and BES-2012-052673, by the Ministerio de Educación, Spain, under the FPU program, AP2010-4397, AP2009-2415, and by the Universitat Politècnica de València under project ABATIS (PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptación para multiples GPU de un simulador de actividad eléctrica en el corazón, Multi-GPU adaptation of a simulator of heart electric activity

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • Liberos Mascarell, Alejandro
  • Climent, Andreu M.
[EN] The simulation of the electrical activity of the heart is calculated by solving a large system of ordinary differential equations; this takes an enormous amount of computation time. In recent years graphics processing unit (GPU) are being introduced in the field of high performance computing. These powerful computing devices have attracted research groups requiring simulate the electrical activity of the heart. The research group signing this paper has developed a simulator of cardiac electrical activity that runs on a single GPU. This article describes the adaptation and modification of the simulator to run on multiple GPU. The results confirm that the technique significantly reduces the execution time compared to those obtained with a single GPU, and allows the solution of larger problems., [ES] La simulación de la actividad eléctrica del corazón se calcula mediante la resolución de un gran sistema de ecuaciones diferenciales ordinarias, que necesita una enorme cantidad de tiempo de computación. Sin embargo, en los últimos años se están introduciendo, en el ámbito de la computación de alto rendimiento, las unidades de procesamiento gráfico (GPU). Estos potentes dispositivos han atraído a grupos de investigación que requieren simular la actividad eléctrica del corazón. El grupo de investigación que firma este artículo ha desarrollado un simulador de actividad eléctrica cardíaca que se ejecuta en una sola GPU. En este artículo se describe la adaptación y modificaciones de dicho simulador para su ejecución en múltiples GPU. Los resultados confirman que la técnica empleada permite reducir sensiblemente los tiempos de ejecución respecto a los que se obtienen con una sola GPU, además de permitir afrontar problemas mucho más grandes., Este trabajo ha sido financiado por la Universitat Politècnica de València a través de su Programa de Apoyo a la Investigación y Desarrollo (PAID-06-11) y (PAID-05-12), por la Generalitat Valenciana a través de los proyectos PROMETEO/2009/013 y Ayudas para la realización de proyectos de I+D para grupos de investigación emergentes GV/2012/039, y por el Ministerio Español de Economía y Competitividad y el fondo europeo de Desarrollo Regional (FEDER) de la Comunidad Europea través del proyecto TEC2012-38142-C04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of the JDS satisfaction scales applied to educational university environments

  • Giraldo O'Meara, Martha Marcela
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Martínez-Gómez, Mónica|||0000-0003-2401-9403
[EN] Purpose: The aim of this study is to review and summarize the main satisfaction scales used in publications about human Resource Management and educational research, in order to adapt the satisfaction scales of the Job Diagnostic Survey (JDS) to higher education and validate it with a sample of university students and to assess the concept of satisfaction in two different ways: as a single-item measure, with a global indicator and as a multi-item measure, analyzed as a global model and composed by several scales. Design/methodology/approach: Confirmatory factor analysis with maximum likelihood, using structural equations model, was employed to assess the model fit in 152 business management undergraduates. Findings and originality/value: The satisfaction model measured as multi-item scale present an acceptable fit. Even though, some of the satisfaction scales did not present a satisfactory fit, they can be used and interpreted independently with carefulness. Nevertheless, the satisfaction single-item scale presents a better fit and has been validated as a simpler and less costly measure of satisfaction., This paper has been written with financial support from the Project "Identificación y baremación de los factores protectores y de riesgo psicosociales en el entorno laboral por medio de un cuestionario adaptado al screening/benchmarking poblacional: implicaciones sobre la calidad de vida laboral" (PAID-05-12-SP20120480) of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biochar versus hydrochar as growth media constituents for ornamental plant cultivation

  • Fornes Sebastiá, Fernando|||0000-0002-2835-5482
  • Belda Navarro, Rosa María|||0000-0001-7673-6207
[EN] Biochar and hydrochar have been proposed as novel materials for providing soilless growth media. However, much more knowledge is required before reliable advice can be given on the use of these materials for this purpose. Depending on the material and the technology applied (pyrolysis or hydrothermal carbonization), phytotoxicity and greenhouse gas emissions have been found for certain chars. In this study, our aim was to assess the feasibility of three chars as substrate constituents. We compared two biochars, one from forest waste and the other from olive mill waste, and a hydrochar from forest waste. We studied how chars affected substrate characteristics, plant performance, water economy and respiratory CO2 emission. Substrates containing biochar from forest waste showed the best characteristics, with good air/water relationships and adequate electrical conductivity. Those with biochar from olive mill waste were highly saline and, consequently, low quality. The substrates with hydrochar retained too much water and were poorly aerated, presenting high CO2 concentrations due to high respiratory activity. Plants performed well only when grown in substrates containing a maximum of 25 % biochar from forest waste or hydrochar. After analyzing the char characteristics, we concluded that biochar from forest waste could be safely used as a substrate constituent and is environmentally friendly when applied due to its low salinity and low CO2 emission. However, biochar from olive mill waste and hydrochar need to be improved before they can be used as substrate constituents., This study was funded by the Polytechnic University of Valencia (Projects on New Multidisciplinary Research; PAID-05-12). We thank Molly Marcus-McBride for supervising the English.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control rod drop transient analysis with the coupled parallel code pCTF-PARCSv2.7

  • Ramos Peinado, Enrique|||0000-0002-5960-5501
  • Jose E. Roman|||0000-0003-1144-6772
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Abarca Giménez, Agustín
  • Bermejo, Juan A.
In order to reduce the response time when simulating large reactors in detail, a parallel version of the thermal–hydraulic subchannel code COBRA-TF (CTF) has been developed using the standard Message Passing Interface (MPI). The parallelization is oriented to reactor cells, so it is best suited for models consisting of many cells. The generation of the Jacobian matrix is parallelized, in such a way that each processor is in charge of generating the data associated with a subset of cells. Also, the solution of the linear system of equations is done in parallel, using the PETSc toolkit. With the goal of creating a powerful tool to simulate the reactor core behavior during asymmetrical transients, the 3D neutron diffusion code PARCSv2.7 (PARCS) has been coupled with the parallel version of CTF (pCTF) using the Parallel Virtual Machine (PVM) technology. In order to validate the correctness of the parallel coupled code, a control rod drop transient has been simulated comparing the results with the real experimental measures acquired during an NPP real test. 2015 Elsevier Ltd. All rights reserved., This work has been partially supported by the Universitat Politecnica de Valencia under Projects COBRA_PAR (PAID-05-11-2810) and OpenNUC (PAID-05-12), and by the Spanish Ministerio de Economa y Competitividad under Projects SLEPc-PFE (TIN2013-41049-P) and NUC-MULTPHYS (ENE2012-34585). The authors would like to acknowledge the technical support provided by CNAT and IBERDROLA GENERACION S.A. for the realization of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Investigación interdisciplinar experimental de arte contemporáneo y matemáticas

  • Perez-Garcia, Elias-Miguel|||0000-0002-2614-0306
  • Peris Manguillot, Alfredo|||0000-0003-1683-2373
[EN] The communication shows the methodology and results of the research project funded within the call for new lines of multidisciplinary research of “Programa de Apoyo a la investigación y desarrollo de la U.P.V. (PAIDH05H12), Reference: AP20120570. Principal investigator: Elías M. Pérez García Throughout the entire history of art, science and technology have formed part of the same innovative force and wealth of their interaction has contributed to integral human progress. The importance of mathematics in artistic creation can be traced from the origin of art itself. At present there is a wide field of research in art and mathematics, both sculpture by mathematicians, such as plastic work with mathematical references made by artists. Despite its high interest, often lack mathematical sculpture aesthetic innovation enough to be referred to in the art circuits, while the plastic work done by artists, is usually confined to certain types and sometimes lacks rigorous mathematical basis. The overall objective of the project is to explore the vast and fertile territory between art and mathematics. It is not so much to make specific and recognizable art and math projects, such as using as uninhibited interaction interdisciplinary laboratory of ideas, brainstorming topics, theories and terminologies, respecting the interests of the different practices and poetics of the participants. In any case, in this project, we plan to overcome this dual role as a recognizable artistic practice as a scientific techno or sculpture that formalizes mathematical problems or formulas. Committed to an inclusive formula of interaction with a group of artists with common paths or interests and a group of mathematicians working in engineering or architecture. The results are shown in an exhibition to be held in July in the exhibition hall of the School of Architecture of the UPV, a publication will also be held. The list of participants in the exhibition and the publication, with individual or group proposals is as follows: The field of Fine Arts: Vicente Barón; Juan A. Cerezuela; Jaume Chornet; Iker Fidalgo; Rocío Garriga; Irene Grau; Leonardo Gómez; Luis Lisbona; Estela L. de Frutos; Francisco Martí; José Juan Martínez ; Miguel Molina; Joaquin Ortega; Javier Palacios; Elías Pérez; Rosana Rufete Encarna Sáez; Carlos Miguel Sánchez; Chiara Sgaramella; Aris Spentsas; Aixa Takkal; Álvaro Terrones; Daniel Tomás; Elia Torrecilla; Sergio Velasco; Sara Vilar. The field of mathematics: Xavier Barrachina; María García Monera; Mari Carmen Gómez Marina Murillo Alfred Peris; Yunied Puig de Dios Francisco Rodenas; Macarena Trujillo. Professional field: Nathalie Gagnon; Cristina Guetty; Yves Leduc; Emanuele Mazza; Sebastià Miralles; Mujeres y Punto; Marco Rainieri., [ES] La comunicación muestra la metodología y resultados obtenidos en el proyecto de investigación financiado, dentro de la convocatoria de nuevas líneas de investigación multidisciplinares del Programa de Apoyo a la investigación y desarrollo de la U.P.V. (PAID-05-12), Referencia: AP20120570. Investigador principal: Elías M. Pérez García. A lo largo de toda la historia arte, ciencia y tecnología han formado parte de un mismo ímpetu innovador y la riqueza de su interacción ha contribuido al progreso humano integral. La importancia de las matemáticas en la creación artística se puede rastrear desde el origen mismo del arte. En este momento existe un amplio campo de investigación en arte y matemáticas, tanto escultura hecha por matemáticos como obra plástica con referentes matemáticos hecha por artistas. A pesar de su alto interés, la escultura matemática suele carecer de la innovación estética suficiente como para ser contemplada en los circuitos artísticos, mientras la obra plástica hecha por artistas, se suele circunscribir a determinadas tipologías y a veces carece de fundamento matemático riguroso. El objetivo general del proyecto es explorar el amplio y fértil territorio entre el arte y las matemáticas. Se trata, no tanto de realizar proyectos específicos y reconocibles de arte y matemáticas, como utilizar la interacción interdisciplinar como laboratorio desinhibido de ideas, poniendo en común temas, teorías y terminologías, respetando los intereses de las diferentes prácticas y poéticas de los participantes. Los resultados se mostrarán en una exposición que se celebrará en julio, en la sala de exposiciones de la Escuela Técnica Superior de Arquitectura de la UPV, se realizará también una publicación. La relación de participantes en la exposición y en la publicación, con propuestas individuales o grupales es la que sigue: Del ámbito de Bellas Artes: Vicente Barón; Juan A. Cerezuela; Jaume Chornet; Iker Fidalgo; Rocío Garriga; Irene Grau; Leo Gómez; Estela L. de Frutos; Francisco Martí; Aixa Takkal; Alberto Rubio; Jose Juan Martínez ; Miguel Molina; Joaquin Ortega; Javier Palacios; Elías Pérez; Encarna Sáez; Chiara Sgaramella; Aris Spentsas; Daniel Tomás; Álvaro Terrones; Elia Torrecilla; Sergio VelascoDel ámbito de las matemáticas: Alfred Peris; Francisco Rodenas; María García Monera; Yunied Puig de Dios Del ámbito profesional: Yves Leduc; Nathalie Gagnon; Cristina Guetty; Sebastià Miralles; Marco Rainieri, La comunicación muestra la metodología y resultados obtenidos en el proyecto de investigación financiado, dentro de la convocatoria de nuevas líneas de investigación multidisciplinares del Programa de Apoyo a la investigación y desarrollo de la U.P.V. (PAIDH05H12), Referencia: AP20120570. Investigador principal: Elías M. Pérez García.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Some remarks on fuzzy contractive mappings

  • Gregori Gregori, Valentín|||0000-0002-5983-6182
  • Miñana, Juan-José
Recently a new concept of fuzzy contraction in fuzzy metric spaces in the sense of George and Veeramani (Wardowski, 2013 [5]) has been introduced. Here we provide some comments to this paper., Juan-Jose Minana acknowledges the support of Conselleria de Educacion, Formacion y Empleo (Programa Vali+d para investigadores en formacion) of Generalitat Valenciana, Spain and the support of Universitat Politecnica de Valencia under Grant PAID-06-12 SP20120471.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobile Sensing Systems

  • Macias Lopez, Elsa Maria
  • Suarez Sarmiento, Alvaro
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Rich-sensor smart phones have made possible the recent birth of the mobile sensing research area as part of ubiquitous sensing which integrates other areas such as wireless sensor networks and web sensing. There are several types of mobile sensing: individual, participatory, opportunistic, crowd, social, etc. The object of sensing can be people-centered or environment-centered. The sensing domain can be home, urban, vehicular Currently there are barriers that limit the social acceptance of mobile sensing systems. Examples of social barriers are privacy concerns, restrictive laws in some countries and the absence of economic incentives that might encourage people to participate in a sensing campaign. Several technical barriers are phone energy savings and the variety of sensors and software for their management. Some existing surveys partially tackle the topic of mobile sensing systems. Published papers theoretically or partially solve the above barriers. We complete the above surveys with new works, review the barriers of mobile sensing systems and propose some ideas for efficiently implementing sensing, fusion, learning, security, privacy and energy saving for any type of mobile sensing system, and propose several realistic research challenges. The main objective is to reduce the learning curve in mobile sensing systems where the complexity is very high., This work has been partially supported by the "Ministerio de Ciencia e Innovacion", through the "Plan Nacional de I+D+i 2008-2011" in the "Subprograma de Proyectos de Investigacion Fundamental", project TEC2011-27516, and by the Polytechnic University of Valencia, through the PAID-05-12 multidisciplinary projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy estimations and systems dynamics for improving manufacturing orders in VMI supply chains

  • Campuzano Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
  • Peidro Payá, David|||0000-0001-8678-6881
[EN] In this chapter, we evaluate the behavior of fuzzy estimations of demand for releasing manufacturing orders in a Vendor-Managed Inventory (VMI) supply chain, which is based on a collaborative deal between retailer and manufacturer, and focuses on the interchange of information about demand and inventory levels. The supply chain considered consists of an end consumer, a retailer and a manufacturer. A system dynamics model with fuzzy estimations of demand has been constructed for supply chain simulation. Fuzzy numbers are used to model fuzzy estimations of demand. With a numerical example, we show that the bullwhip effect can be effectively reduced at the level where fuzzy orders exist and that the fill rate reached improves at the retailer level., This work has been funded by the Universitat Politècnica de València projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Cooperative Decision Making Algorithm for Wireless Location Systems Using Interlinking Data

  • García Pineda, Miguel
  • Bri Molinero, Diana
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
  • Lloret, Jaime|||0000-0002-0862-0533
Nowadays, several wireless location systems have been developed in the research world. The goal of these systems has always been to find as greatest accuracy as possible. But, if every node takes data from the environment, we could gather a lot of information, which may help us to know what is happening around our network. In order to obtain the correct conclusion, we have developed an algorithm based on interlinking data. These data come from several nodes, and each node can give us one or several parameters. Our algorithm deals these data cooperatively in order to find the connection between them and provide the environmental behavior. This algorithm is based on statistical methods due to the fact that it involves an observational experiment. Finally, our cooperative decision making algorithm is tested on a wireless location system. The results show that this algorithm works properly and we are able to know what is happening around our wireless location system when we use it. © 2013 Springer-Verlag Berlin Heidelberg., This work is supported by the “Ministerio de Ciencia e Innovación”, through the “Plan Nacional de I+D+I 2008-2011”, project TEC2011-27516 and by the “Universitat Politècnica de Valencia” through “PAID-05-12”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of two biochars and one hydrochar from different feedstock: focus set on environmental, nutritional and horticultural considerations

  • Fornes Sebastiá, Fernando|||0000-0002-2835-5482
  • Belda Navarro, Rosa María|||0000-0001-7673-6207
  • Lidón, Antonio|||0000-0002-0455-4348
[EN] Two biochars, one from forest waste (BCH-FW) and the other from olive mill waste (BCH-OMW), and one hydrochar from forest waste (HYD-FW) were analyzed from the horticultural and environmental point of view. Several incubation assays were performed to foresee the material evolution when used as soilless growth media. HYD-FW was slightly alkaline and rich in nutrients and showed high microbial respiration Moreover, it did not caused N immobilization but N mineralization which contradicts previous reports. Biochars were highly alkaline. BCH-FW was poor in nutrients whilst BCH-OMW was saline and rich in soluble cations. Both materials had low respiratory activity, similar to that of coir fibre (CF). Whilst BCH-FVV and CF immobilize N, BCH-OMW did not. Both biochars captured CO2 from the atmosphere, particularly BCH-OMW, which concomitantly showed a decrease in soluble cations. We conclude that pure hydrochar does not immobilize N and that alkaline biochars act as CO2 traps. (C) 2014 Elsevier Ltd. All rights reserved., This study was funded by the Universitat Politecnica de Valencia (Proyectos de nuevas Lineas de Investigacion Multidisciplinares; SP 20120433-PAID-05-12). We thank INGELIA S.L. for giving the hydrochar for free and to Mr Manuel Sanchez-Perales and Mrs Joana Oliver for their technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization models for supply chain production planning under fuzziness

  • Mula, Josefa|||0000-0002-8447-3387
  • Peidro Payá, David|||0000-0001-8678-6881
  • Poler, R.|||0000-0003-4475-6371
[EN] The aim of this chapter is to propose diverse fuzzy mathematical programming models based on the fuzzy set theory for supply chain production planning in a multi-product, multi-plant environment with fuzziness and capacity constraints. The proposed models consider fuzziness in demand and at the aspiration level of total costs. The main contribution of this chapter to the field of fuzzy sets is a practical application of flexible programming approaches (or fuzzy constraints) in linear programming with diverse aggregation schemes to the model originally proposed by McDonald and Karimi (1997)for supply chain production planning., This work has been funded by the Universitat Politècnica de València projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finite element based acoustic analysis of dissipative silencers with high temperature and thermal-induced heterogeneity

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Martínez Casas, José|||0000-0001-5706-4951
  • Kirby, Ray
A mixed finite element model has been derived for the acoustic analysis of perforated dissipative silencers including several effects simultaneously: (1) High temperature and thermal gradients in the central duct and the outer absorbent material; (2) A perforated passage carrying non-uniform axial mean flow. For such a combination, the properties of sound propagation media and flow are inhomogeneous and vary with position. The material of the outer chamber can be modelled by its complex equivalent acoustic properties, which completely determine the propagation of sound waves in the air contained in the absorbent medium. Temperature gradients introduce variations in these properties that can be evaluated through a heterogeneous temperature-dependent resistivity in combination with material models obtained at room temperature. A pressure-based wave equation for stationary medium is then used with the equivalent density and speed of sound of the absorbent material varying as functions of the spatial coordinates. Regarding the central air passage, a wave equation in terms of acoustic velocity potential can be used to model the non-uniform moving medium since the presence of temperature variations introduce not only heterogeneous acoustic properties of the air but also a gradient in the mean flow velocity. The acoustic connection between the central passage and the outer chamber is given by the acoustic impedance of the perforated duct. This impedance depends on the heterogeneous properties of the absorbent material and the non-uniform mean flow, leading to a spatial variation of the acoustic coupling and also to additional convective terms in the governing equations. The results presented show the influence of temperature, thermal gradients and mean flow on the transmission loss of automotive silencers. It has been found that high temperature and thermal-induced heterogeneity can have a significant influence on the acoustic attenuation of an automotive silencer and so should be included in theoretical models. In some particular configurations it may be relatively accurate to approximate the temperature field by using a uniform profile with an average value, specially for low resistivity materials. It has been shown, however, that this is not always possible and attenuation overestimation is likely to be predicted, mainly for high radial thermal gradients and high material flow resistivities, if the temperature distribution is not taken into account., Authors gratefully acknowledge the financial support of Ministerio de Economia y Competitividad and the European Regional Development Fund (projects DPI2010-15412 and TRA2013-45596-C2-1-R), Generalitat Valenciana (project Prometeo/2012/023) and Universitat Politecnica de Valencia (PAID-05-12, project SP20120452).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How to assess innovation competence in services: The case of university students, ¿Cómo medir la competencia en innovación?: aplicación a estudiantes universitarios

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Pérez Peñalver, María José|||0000-0003-0403-1405
  • Watts Hooge, Frances Irene
[EN] The main purpose of this paper is to review the concept of innovation capacity in higher education students, proposing constructs for a measurement model of innovation capacity as a second-order formative model and validation of measurement scales with 332 students from a Spanish university. The proposed model can be considered to meet, in general, the criteria for content validity and the validation tests suitable for the formative model. Thus, the academic community can benefit from a validated measurement instrument that can be used in the future to collect data on dependent and independent variables in causal models. The paper also presents a contribution for teaching professionals interested in measuring the degree of development of innovation competence in their students., [ES] Este trabajo presenta una definición de la capacidad de innovación de los estudiantes universitarios. Para ello se propondrá el modelo de medida de las variables latentes, considerando la capacidad de innovación como un modelo de segundo orden formativo. Las escalas se han validado con una muestra de 332 estudiantes universitarios españoles. Podemos considerar que el modelo propuesto cumple, en general, con los criterios de validez de contenido y las pruebas de validación de escalas formativas. Ofrecemos a la comunidad académica un instrumento validado que puede ser usado, en el futuro, para medir variables dependientes o independientes de modelos causales. También representa una contribución para los profesores universitarios interesados en evaluar el grado de desarrollo de la competencia de innovación en sus alumnos, This research was supported by Project 518132-LLP1-2011-1-FI-ERASMUS-FEXI "INCODE- Innovation Competencies Development" of the European Union and by the project entitled "Identificación y baremación de los factores protectores y de riesgo psicosociales en el entorno laboral por medio de un cuestionario adaptado al screening/benchmarking poblacional: implicaciones sobre la calidad de vida laboral" (PAID05-12-SP20120480), of the Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Principal component analysis applied to study of carbon steel electrochemical corrosion

  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Monzón-Bello, Pablo
  • Bataller Prats, Román
  • Campos Sánchez, Inmaculada
  • Lloris Cormano, José Manuel
  • Soto Camino, Juan
Voltammetric techniques (open circuit potential, linear polarisation resistance and cyclic voltammetry) have been applied to study the corrosion of carbon steel in water. The study has been performed in aqueous solutions for pH ranging between 7 and 12 in the presence of chlorides, sulphates, carbonates, nitrites and nitrates. Principal component analysis (PCA) was performed with the cyclic voltammetric data. Values of corrosion potential and corrosion current obtained with traditional methods are compared to the conclusions arisen by the PCA. These results show the ability of PCA for the evaluation and diagnosis of corrosion processes and not only that, it leads to the possibility of using steel working electrodes as ion sensors., The financial support from the Spanish Government (project MAT2009-14564-C04) Generalitat Valenciana (Valencian Regional Government; project PROMET EO/2009/016) and to 'Programa de Apoyo a la Investigacion y Desarrollo' de la Universidad Politecnica de Valencia (PAID-05-12) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Análisis y Validación de la Consistencia en un Simulador de Conducción

  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[ES] Muy diversas investigaciones previas han mostrado cómo la percepción del riesgo afecta el comportamiento de los conductores. Muchas de ellas van dirigidas a observar la diferencia de percepción entre conductores experimentados y noveles, o entre el riesgo objetivo y el percibido. Mientras que el riesgo objetivo puede ser obtenido a partir de las estadísticas de siniestralidad, el riesgo percibido es más complicado de evaluar. Existen diversos métodos, yendo desde la encuesta directa hasta técnicas de rastreo de la visión.En este estudio se presenta una nueva metodología para recoger datos de Percepción Subjetiva de Riesgo (PSR) de forma quasi-naturalística. Con esta metodología, los conductores pueden indicar de forma sencilla su percepción de confort tras recorrer cada una de las curvas que compone un trazado. Posteriormente, la correlación de estos datos con la geometría de las curvas y otras variables permite derivar sencillas reglas para obtener un diseño consistente de la carretera. Igualmente, si esta metodología es válida para ser llevada a cabo en un entorno simulado, permitiría evaluar carreteras en fase de proyecto, convirtiéndose en una valiosa herramienta para los ingenieros.Un total de 28 conductores participaron en la toma de datos, recorriendo el mismo tramo de carretera en la realidad y en entorno simulado, de 32 km. En ambos casos indicaron su percepción de PSR tras cada una de las curvas aisladas. En este estudio se muestran los resultados alcanzados, tanto en el entorno real como el simulado. Igualmente, se establecen conexiones y correlaciones entre ambos métodos, mostrando bajo qué condiciones el entorno simulado arroja valores válidos., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Underwater Wireless Communications in Freshwater at 2.4 GHz

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Rodrigues, Joel J. P. C.
  • Aguiar, Javier M.
There are few equations for underwater communications in the related literature. They show that the speed propagation and absorption coefficient in freshwater are independent of the working frequency of the transmitted signals. However, some studies demonstrate that electromagnetic waves present lower losses when they are working at certain frequencies. In this paper, we perform a set of measurements of electromagnetic (EM) waves at 2.4 GHz in the underwater environment. In our study case, we fix the water conditions and we measure the behavior of EM as a function of several network parameters such as the working frequency, data transfer rates and modulations. Our results will show that higher frequencies do not mean worse network performance. We will also compare our conclusion with some statements extracted from other works., This work has been partially supported by the Ministerio de Ciencia e Innovacion, through the Plan Nacional de I+D+i 2008 - 2011 in the Subprograma de Proyectos de Investigacion Fundamental, project TEC2011 - 27516, and by the Polytechnic University of Valencia, through the PAID-05-12 multidisciplinary projects, Ref: SP20120420. This work has also been partially supported by the Instituto de Telecomunicacoes, Next Generation Networks and Applications Group (NetGNA), Portugal, and by National Funding from the FCT Fundacao para a Ciencia e a Tecnologia through the PEst - OE/EEI/LA0008/2013 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D acoustic modelling of dissipative silencers with nonhomogeneous properties and mean flow

  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Denia, Francisco David
  • Martínez-Casas, José
  • Baeza, Luis
A finite element approach is proposed for the acoustic analysis of automotive silencers including a perforated duct with uniform axial mean flow and an outer chamber with heterogeneous absorbent material. This material can be characterized by means of its equivalent acoustic properties, considered coordinate-dependent via the introduction of a heterogeneous bulk density, and the corresponding material airflow resistivity variations. An approach has been implemented to solve the pressure wave equation for a nonmoving heterogeneous medium, associated with the problem of sound propagation in the outer chamber. On the other hand, the governing equation in the central duct has been solved in terms of the acoustic velocity potential considering the presence of a moving medium. The coupling between both regions and the corresponding acoustic fields has been carried out by means of a perforated duct and its acoustic impedance, adapted here to include absorbent material heterogeneities and mean flow effects simultaneously. It has been found that bulk density heterogeneities have a considerable influence on the silencer transmission loss., This work was supported by Ministerio de Economia y Competitividad (Projects DPI2010-15412 and TRA2013-45596-C2-1-R), Conselleria d'Educacio, Cultura i Esport (Project Prometeo/2012/023), and Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-12 and Project SP20120452) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobile Devices and Sensors for an Educational Multimedia Opera Project

  • Dannenberg, R.B.
  • Carrascosa, Elisabeth
  • Sastre, Jorge|||0000-0002-8612-6717
  • Scarani, Stefano|||0000-0003-2366-8866
  • Lloret Romero, María Nuria
[EN] Interactive computer-based music systems form a rich area for the exploration of collaborative systems where sensors play an active role and are important to the design process. The Soundcool system is a collaborative and educational system for sound and music creation as well as multimedia scenographic projects, allowing students to produce and modify sounds and images with sensors, smartphones and tablets in real time. As a real-time collaborative performance system, each performance is a unique creation. In a comprehensive educational project, Soundcool is used to extend the sounds of traditional orchestral instruments and opera singers with electronics. A multidisciplinary international team participates, resulting in different performances of the collaborative multimedia opera The Mother of Fishes in countries such as Spain, Romania, Mexico and the USA., The Soundcool project has been funded by the Daniel and Nina Carasso Foundation Grant 16-AC-2016, the Generalitat Valenciana Grants GJIDI/2018/A/169 and AICO/2015/120, the Spanish Ministerio de Educación, Cultura y Deporte Salvador de Madariaga Grant PRX12/00557, the UPV project PAID 05-12-SP20120470 and a UPV Cátedra Telefónica Grant 2017. Some of the Spanish opera performances have been partially funded by the Institut Valencià de Cultura of the Generalitat Valenciana (2016, 2017, 2018) and the European Erasmus+ projects 2018-1-ES01-KA101-049101 and 2015-1-ES01-KA201-016139. All other contributors are acknowledged in the different videos described above. Soundcool was also used for the Erasmus project 2017-2-IT03-KA105-011802. The Soundcool neurodegenerative disease applications have been funded by the Generalitat Valenciana Grants AICO/2020/151, CIBEST/2021/90 and CIAICO/2022/60, the Santander investigadores/personal técnico en el ecosistema de UC Berkeley Grant 2021/2022 and the UPV-FISABIO-2020-A05 (Polisabio) Grant TANTAENDSCovid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quality of goats milk cheese as affected by coating with edible chitosan-essential oil films

  • Cano Embuena, Amalia Isabel
  • Borràs Llopis, Milagros
  • Cháfer Nácher, Maite|||0009-0009-5727-8306
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Molina Pons, Mª Pilar|||0000-0002-0647-8609
  • Beltrán Martínez, Mª Carmen|||0000-0002-5335-2179
  • González Martínez, María Consuelo|||0000-0001-9993-8303
[EN] The effectiveness of applying chitosan coatings containing rosemary and oregano essential oils to cheeses was analysed. Cheeses were coated by immersing the samples two or three times successively in the different formulations. The ripening indexes, water loss, fungal growth and sensory properties of the coated and noncoated cheeses throughout ripening were evaluated. The coatings both prevented weight loss and improved the microbial safety. The lipolytic and proteolytic activities were reduced in coated cheese, which is in line with the antimicrobial effect of active coatings. Sensory evaluation revealed that the cheeses double-coated with chitosan oregano oil were the best evaluated in terms of aroma and flavour., The authors wish to acknowledge the financing of the project by the Program of Support for Research and Development (PAID-05-12) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Maximum Likelihood Detection through Sphere Decoding combined with Box Optimization

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Vidal Maciá, Antonio Manuel
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Roger Varea, Sandra
Sphere Decoding is a popular Maximum Likelihood algorithm that can be used to detect signals coming from multiple-input, multiple-output digital communication systems. It is well known that the complexity required to detect each signal with the Sphere Decoding algorithm may become unacceptable, especially for low signal-to-noise ratios. In this paper, we describe an auxiliary technique that drastically decreases the computation required to decode a signal. This technique was proposed by Stojnic, Hassibi and Vikalo in 2008, and is based on using continuous box-bounded minimization in combination with Sphere Decoding. Their implementation is, however, not competitive due to the box minimization algorithm selected. In this paper we prove that by judiciously selecting the box minimization algorithm and tailoring it to the Sphere Decoding environment, the computational complexity of the resulting algorithm for low signal-to-noise ratios is better (by orders of magnitude) than standard Sphere Decoding implementations. & 2013 Elsevier B.V. All rights reserved., This work has been partially funded by Universitat Politecnica de Valencia through Programa de Apoyo a la Investigacion y Desarrollo de la UPV (PAID-06-11) and (PAID-05-12), by Generalitat Valenciana through projects PROMETEO/2009/013 and Ayudas para la realizacion de proyectos de I+D para grupos de investigacion emergentes GV/2012/039, and by Ministerio Espanol de Economia y Competitividad through project TEC2012-38142-C04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Validación de un simulador de conducción de bajo coste para el diseño de carreteras convencionales

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • García García, Alfredo|||0000-0003-1345-3685
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
[ES] La cantidad de estudios de seguridad vial basados en simuladores de conducción está en continuo crecimiento. En este sentido, la Universitat Politècnica de València (UPV) ha desarrollado un simulador de conducción de bajo coste: SE2RCO (Simulador para la Evaluación, Entrenamiento y Rehabilitación de Conductores). El principal objetivo de la investigación es la validación de este simulador, con el fin de desarrollar estudios relacionados con la seguridad vial y el diseño geométrico de carreteras incorporando el factor humano. Dicha validación se ha realizado a partir de la observación en campo de los perfiles continuos de velocidad desarrollados por 28 voluntarios conduciendo su propio vehículo en un tramo de carretera convencional de 30 km. Los mismos voluntarios condujeron posteriormente en el simulador de conducción ese mismo tramo de carretera reconstruido en un entorno virtual. Un total de 79 curvas y 52 rectas fueron objeto de análisis. La comparación entre las velocidades desarrolladas en la realidad y las observadas durante la simulación permitieron llevar a cabo la validez objetiva del simulador de conducción. Los resultados mostraron que la velocidad media en el simulador y en la realidad era similar cuando la velocidad simulada era inferior a 87.3 km/h. En caso de ser superior, la velocidad media en la realidad era menor que en el simulador. En cuanto a la velocidad de operación, se observó que la velocidad real era aproximadamente 5 km/h menor que la simulada. Finalmente, estos resultados estuvieron apoyados por la percepción de los conductores, ya que la mayoría de ellos evaluaron la calidad del entorno simulado y el grado de similitud entre la tarea de conducción real y simulada como medio o alto, consiguiendo de esta manera la validez subjetiva del simulador de conducción., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy Free Path Detection from Disparity Maps by Using Least-Squares Fitting to a Plane

  • Ortigosa, Nuria|||0000-0002-5272-7661
  • Morillas, Samuel|||0000-0001-9262-6139
A method to detect obstacle-free paths in real-time which works as part of a cognitive navigation aid system for visually impaired people is proposed. It is based on the analysis of disparity maps obtained from a stereo vision system which is carried by the blind user. The presented detection method consists of a fuzzy logic system that assigns a certainty to be part of a free path to each group of pixels, depending on the parameters of a planar-model fitting. We also present experimental results on different real outdoor scenarios showing that our method is the most reliable in the sense that it minimizes the false positives rate., N. Ortigosa acknowledges the support of Universidad Politecnica de Valencia under grant FPI-UPV 2008 and Spanish Ministry of Science and Innovation under grant MTM2010-15200. S. Morillas acknowledges the support of Universidad Politecnica de Valencia under grant PAID-05-12-SP20120696.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the inclusion of citrus pulp in the diet of goats on cheeses characteristics

  • Salvador Alcaraz, Ana
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Contreras Monzón, Carolina Ivonne|||0000-0003-3377-4531
  • Martínez-Navarrete, Nuria|||0000-0001-8345-8495
  • Camacho Vidal, Mª Mar|||0000-0002-2342-2105
The differences between the physicochemical (water content, water activity, pH, NaCl, fat, color, and texture) and sensory (descriptive analysis and consumer test) characteristics of cheeses made from the milk of goats fed on a typical control diet and goats fed on a diet incorporating orange pulp were compared. The addition of orange pulp leads to obtain cheeses(i) with a lower pH and water activity, but with a higher fat content, (ii) that are lighter and with a more yellowish-green hue and (iii) higher in color purity, hardness and adhesiveness, although they are less elastic and cohesive. Thus, the incorporation of orange pulp into the goat's diet affected not only the presence of holes in the cheese, but also its hardness, goat taste and salty taste, which were associated with a higher score of consumer acceptance. (C) 2014 Elsevier B.V. All rights reserved., The authors thank the panel of assessors for making themselves available and the Universitat Politecnica de Valencia for the financial support given throughout the Project PAID-05-12, SP20120723.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Post-extraction mesio-distal gap reduction assessment by confocal laser scanning microscopy - a clinical 3-month follow-up study

  • García-Herraiz, Ariadna
  • Silvestre, Francisco Javier
  • Leiva García, Rafael
  • Crespo Abril, Fortunato|||0000-0002-5365-349X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] AimThe aim of this 3-month follow-up study is to quantify the reduction in the mesio-distal gap dimension (MDGD) that occurs after tooth extraction through image analysis of three-dimensional images obtained with the confocal laser scanning microscopy (CLSM) technique. Materials and MethodsFollowing tooth extraction, impressions of 79 patients 1month and 72 patients 3months after tooth extraction were obtained. Cast models were processed by CLSM, and MDGD changes between time points were measured. ResultsThe mean mesio-distal gap reduction 1month after tooth extraction was 343.4m and 3months after tooth extraction was 672.3m. The daily mean gap reduction rate during the first term (between baseline and 1month post-extraction measurements) was 10.3m/day and during the second term (between 1 and 3months) was 5.4m/day. ConclusionsThe mesio-distal gap reduction is higher during the first month following the extraction and continues in time, but to a lesser extent. When the inter-dental contacts were absent, the mesio-distal gap reduction is lower. When a molar tooth is extracted or the distal tooth to the edentulous space does not occlude with an antagonist, the mesio-distal gap reduction is larger. The consideration of mesio-distal gap dimension changes can help improve dental treatment planning., The authors would like to express their gratitude to MEC (contract grant number AP2008-01653), to FEDER, to the Generalitat Valenciana for its help in the CLSM acquisition (MY08/ISIRM/S/100), to the Universitat Politecnica de Valencia (PAID-05-12) and to Dr. Asuncion Jaime for her translation assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A tabu search approach for production and sustainable routing planning decisions for inbound logistics in an automotive supply Chain

  • Peidro Payá, David|||0000-0001-8678-6881
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Mula, Josefa|||0000-0002-8447-3387
  • Navalón Davó, Abraham
[EN] In this paper, a mixed-integer mathematical programming model is proposed to address a production and routing problem related to inbound logistics processes in supply chains environments. This model is also enriched with sustainable issues related to routing decisions by introducing additional fuel consumption and pollutants emissions calculations into the objective function. For the solution methodology, a two-phase decoupled solution procedure based on exact algorithms for the production model and a tabu search algorithm for the routing model is adopted. Results of computational experiments performed with a realworld automotive supply chain confirm the efficiency of the proposed solution method in terms of total cost, fuel consumptions and CPU time., This work has been funded by the Universitat Politècnica de València projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A review of discrete-time optimization models for tactical production planning

  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
  • Mula, Josefa|||0000-0002-8447-3387
  • Peidro Payá, David|||0000-0001-8678-6881
[EN] This study presents a review of optimization models for tactical production planning. The objective of this research is to identify streams and future research directions in this field based on the different classification criteria proposed. The major findings indicate that: (1) the most popular production-planning area is master production scheduling with a big-bucket time-type period; (2) most of the considered limited resources correspond to productive resources and, to a lesser extent, to inventory capacities; (3) the consideration of backlogs, set-up times, parallel machines, overtime capacities and network-type multisite configuration stand out in terms of extensions; (4) the most widely used modelling approach is linear/integer/mixed integer linear programming solved with exact algorithms, such as branch-and-bound, in commercial MIP solvers; (5) CPLEX, C and its variants and Lindo/Lingo are the most popular development tools among solvers, programming languages and modelling languages, respectively; (6) most works perform numerical experiments with random created instances, while a small number of works were validated by real-world data from industrial firms, of which the most popular are sawmills, wood and furniture, automobile and semiconductors and electronic devices., This study has been funded by the Universitat Politècnica de València projects: ‘Material Requirement Planning Fourth Generation (MRPIV)’ (Ref. PAID-05-12) and ‘Quantitative Models for the Design of Socially Responsible Supply Chains under Uncertainty Conditions. Application of Solution Strategies based on Hybrid Metaheuristics’ (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of the FDT transmission frequency for an optimum content delivery using the FLUTE protocol

  • De Fez Lava, Ismael
  • Fraile Gil, Francisco|||0000-0002-3275-7740
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
File Delivery over Unidirectional Transport (FLUTE) is the standard protocol used in unidirectional environments to provide reliability in the transmission of multimedia files. The key element of this protocol is the use of the File Delivery Table (FDT), which is the in-band mechanism used by FLUTE to inform clients about the files (and their characteristics) transmitted within a FLUTE session. Clients need to receive the FDT in order to start downloading files. Thus, the delivery of FDT packets and the proper configuration of their parameters have a great impact on the Quality of Experience perceived by the users of FLUTE content download services. This paper presents a complete analysis about how the FDT transmission frequency affects the download time of files. Moreover, results show which are the optimum values that minimize this download time. An appropriate configuration of the FDT transmission frequency as well as the use of AL-FEC mechanisms provides an optimum content delivery using the FLUTE protocol., This work is supported in part by the Ministerio de Economia y Competitividad of the Government of Spain under project COMINN (IPT-2012-0883-430000) and by the PAID-05-12 program of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of biochar and hydrochar as minor to major constituents of growing media for containerized tomato production

  • Fornes Sebastiá, Fernando|||0000-0002-2835-5482
  • Belda Navarro, Rosa María|||0000-0001-7673-6207
  • Fernández de Córdova Martínez, Pascual José
  • Cebolla Cornejo, Jaime|||0000-0002-2607-9920
[EN] BACKGROUND: Chars are emerging materials as constituents of growth media. However, chars of different origin differ in their characteristics and more studies are needed to ratify them for such a role. The characteristics of coir mixed with 0%, 10%, 25%, 50%, 75%, and 100% (v/v) of two biochars, from forest waste (BCH-FW) and from olive mill waste (BCH-OMW), and one hydrochar, from forest waste (HYD-FW), and their effects on growth, yield and fruit quality of two tomato cultivars (Gransol RZ and Cuarenteno) were assessed. RESULTS: Chars negatively affected plant growth and yield but not fruit quality. The effect was related to the char dose and was larger in HYD-FW and BCH-FW than in BCH-OMW, despite the high salinity of the latter, and more acute in Cuarenteno than in Gransol RZ. The results were discussed on the basis of the large particle size of BCH-FW, which could have caused low nutrient solution retention and, hence, reduced plant nutrient uptake, and the highwater-holding capacity, poor aeration and large CO2 emission of HYD-FW, which could lead to root anoxia. CONCLUSION: BCH-OMW can be used at high proportion in media for tomato cultivation. The use of BCH-FW at a high proportion might be taken into consideration after adjusting particle size, yet this needs additional assays. HYD-FW is inadequate for soilless containerized tomato cultivation. (C) 2017 Society of Chemical Industry, This study was funded by the Universitat Politecnica de Valencia (Proyectos de nuevas Lineas de Investigacion Multidisciplinares; PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An integer linear programming model to support customer-driven material planning in synchronised, multi-tier supply chains

  • Mula, Josefa|||0000-0002-8447-3387
  • Lyons, Andrew C.
  • Hernández Hormazábal, Jorge Esteban
  • Poler, R.
This paper describes an integer linear programming model conceived as an alternative to a traditional material requirements planning (MRP) system for extending the concept of supply chain synchronisation upstream in a multi-tier supply chain. In this model, we assume there is an incumbent application for transmitting original equipment manufacturer (OEM) require- ments to ␣rst-, second- and third-tier suppliers. The proposed model is regarded as being embedded within a web-enabled, multi-tier, supply chain information system that provides the application for transmitting the production requirements. The principal motivation for having second- and third-tier suppliers that are synchronised with OEM and ␣rst-tier activity is the signi␣cant inventory, lead time and responsiveness gains that can potentially be achieved. Here, inventory is considered as a whole across a supply chain, and stock-outs are prohibited for the ␣rst-tier supplier. For illustration purposes, an example based on a real, automotive case study is provided. The model results proved better in terms of inventory and bullwhip reduction than those found in a previous simulation-based approach. Also, a comparison of the proposed case results with those of a conventional MRP application is provided., This work has been funded by the Program of Support to the Research and Development 2011 of the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) and the UPV project entitled 'Material Requirement Planning Fourth Generation (MRPIV)' (Ref. PAID-05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evidences of spatial (angular) filtering of sound beams by sonic crystals

  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Staliünas, Kestutis
We report experimental evidences of spatial (angular) filtering of sound beams propagating through sonic crystals. We show that at specific frequencies of the incident wave the paraxial plane wave compo- nents of the beam can be efficiently transmitted through the crystal, whereas the components propagat- ing at large angles are strongly reflected or deflected (filtered out) by the crystal. The modification of the angular field distribution results in formation of sound beams of relatively high spatial quality., The work was financieall supported by Spanish Ministry of since and Innovation and European Union FEDER through projects FIS2011-29731-C02-01 and -02, Generalitat Valenciana through the procect GV/2011/2055 and the UPV through PAID-05-12.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sludge reduction by uncoupling metabolism: SBR tests with para-nitrophenol and a commercial uncoupler

  • Zuriaga Agusti, Elena|||0000-0002-5383-1313
  • Mendoza Roca, José Antonio
  • Bes-Piá, M.A.|||0000-0001-8005-7450
  • Alonso Molina, José Luís|||0000-0002-2079-910X
  • Amoros Muñoz, Inmaculada
Nowadays cost reduction is a very important issue in wastewater treatment plants. One way, is to minimize the sludge production. Microorganisms break down the organic matter into inorganic compounds through catabolism. Uncoupling metabolism is a method which promote catabolism reactions instead of anabolism ones, where adenosine triphosphate synthesis is inhibited. In this work, the influence of the addition of para-nitrophenol and a commercial reagent to a sequencing batch reactor (SBR) on sludge production and process performance has been analyzed. Three laboratory SBRs were operated in parallel to compare the effect of the addition of both reagents with a control reactor. SBRs were fed with synthetic wastewater and were operated with the same conditions. Results showed that sludge production was slightly reduced for the tested para-nitrophenol concentrations (20 and 25 mg/L) and for a LODOred dose of 1 mL/day. Biological process performance was not influenced and high COD removals were achieved. (C) 2016 Elsevier Ltd. All rights reserved., This work was supported by Universitat Politecnica de Valencia (Project reference: PAID-05-12).